drivers/char/shwdt.c

/*
 * drivers/char/shwdt.c
 *
 * Watchdog driver for integrated watchdog in the SuperH processors.
 *
 * Copyright (C) 2001, 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
 *     Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
 *
 * 19-Apr-2002 Rob Radez <rob@osinvestor.com>
 *     Added expect close support, made emulated timeout runtime changeable
 *     general cleanups, add some ioctls
 */
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/reboot.h>
#include <linux/notifier.h>
#include <linux/ioport.h>

#include <asm/io.h>
#include <asm/uaccess.h>

#if defined(CONFIG_CPU_SH5)
  extern unsigned long cprc_base;

  #define WTCNT		(cprc_base+0x10)
  #define WTCSR		(cprc_base+0x18)
#elif defined(CONFIG_CPU_SH4)
  #define WTCNT		0xffc00008
  #define WTCSR		0xffc0000c
#elif defined(CONFIG_CPU_SH3)
  #define WTCNT		0xffffff84
  #define WTCSR		0xffffff86
#else
  #error "Can't use SuperH watchdog on this platform"
#endif

#define WTCNT_HIGH	0x5a00
#define WTCSR_HIGH	0xa500

#define WTCSR_TME	0x80
#define WTCSR_WT	0x40
#define WTCSR_RSTS	0x20
#define WTCSR_WOVF	0x10
#define WTCSR_IOVF	0x08
#define WTCSR_CKS2	0x04
#define WTCSR_CKS1	0x02
#define WTCSR_CKS0	0x01

/*
 * CKS0-2 supports a number of clock division ratios. At the time the watchdog
 * is enabled, it defaults to a 41 usec overflow period .. we overload this to
 * something a little more reasonable, and really can't deal with anything
 * lower than WTCSR_CKS_1024, else we drop back into the usec range.
 *
 * Clock Division Ratio         Overflow Period
 * --------------------------------------------
 *     1/32 (initial value)       41 usecs
 *     1/64                       82 usecs
 *     1/128                     164 usecs
 *     1/256                     328 usecs
 *     1/512                     656 usecs
 *     1/1024                   1.31 msecs
 *     1/2048                   2.62 msecs
 *     1/4096                   5.25 msecs
 */
#define WTCSR_CKS_32	0x00
#define WTCSR_CKS_64	0x01
#define WTCSR_CKS_128	0x02
#define WTCSR_CKS_256	0x03
#define WTCSR_CKS_512	0x04
#define WTCSR_CKS_1024	0x05
#define WTCSR_CKS_2048	0x06
#define WTCSR_CKS_4096	0x07

/*
 * Default clock division ratio is 5.25 msecs. For an additional table of
 * values, consult the asm-sh/watchdog.h. Overload this at module load
 * time.
 *
 * In order for this to work reliably we need to have HZ set to 1000 or
 * something quite higher than 100 (or we need a proper high-res timer
 * implementation that will deal with this properly), otherwise the 10ms
 * resolution of a jiffy is enough to trigger the overflow. For things like
 * the SH-4 and SH-5, this isn't necessarily that big of a problem, though
 * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely
 * necssary.
 *
 * As a result of this timing problem, the only modes that are particularly
 * feasible are the 4096 and the 2048 divisors, which yeild 5.25 and 2.62ms
 * overflow periods respectively.
 *
 * Also, since we can't really expect userspace to be responsive enough
 * before the overflow happens, we maintain two seperate timers .. One in
 * the kernel for clearing out WOVF every 2ms or so (again, this depends on
 * HZ == 1000), and another for monitoring userspace writes to the WDT device.
 *
 * As such, we currently use a configurable heartbeat interval which defaults
 * to 30s. In this case, the userspace daemon is only responsible for periodic
 * writes to the device before the next heartbeat is scheduled. If the daemon
 * misses its deadline, the kernel timer will allow the WDT to overflow.
 */
static int clock_division_ratio = WTCSR_CKS_4096;

#define msecs_to_jiffies(msecs)	(jiffies + (HZ * msecs + 9999) / 10000)
#define next_ping_period(cks)	msecs_to_jiffies(cks - 4)

static unsigned long shwdt_is_open;
static struct watchdog_info sh_wdt_info;
static char shwdt_expect_close;
static struct timer_list timer;
static unsigned long next_heartbeat;
static int heartbeat = 30;

#ifdef CONFIG_WATCHDOG_NOWAYOUT
static int nowayout = 1;
#else
static int nowayout = 0;
#endif

/**
 *	sh_wdt_write_cnt - Write to Counter
 *
 *	@val: Value to write
 *
 *	Writes the given value @val to the lower byte of the timer counter.
 *	The upper byte is set manually on each write.
 */
static void sh_wdt_write_cnt(__u8 val)
{
	ctrl_outw(WTCNT_HIGH | (__u16)val, WTCNT);
}

/**
 *	sh_wdt_read_csr - Read from Control/Status Register
 *
 *	Reads back the WTCSR value.
 */
static inline __u8 sh_wdt_read_csr(void)
{
	/*
	 * XXX: This is pretty straightforward on SH-3 and up, though on
	 * anything lower we have seperate locations for reading and
	 * writing the CSR value. We just keep this around for general
	 * completeness.
	 */
        return ctrl_inb(WTCSR);
}

/**
 * 	sh_wdt_write_csr - Write to Control/Status Register
 *
 * 	@val: Value to write
 *
 * 	Writes the given value @val to the lower byte of the control/status
 * 	register. The upper byte is set manually on each write.
 */
static void sh_wdt_write_csr(__u8 val)
{
	ctrl_outw(WTCSR_HIGH | (__u16)val, WTCSR);
}

/**
 * 	sh_wdt_start - Start the Watchdog
 *
 * 	Starts the watchdog.
 */
static void sh_wdt_start(void)
{
	__u8 csr;

	mod_timer(&timer, next_ping_period(clock_division_ratio));
	next_heartbeat = jiffies + (heartbeat * HZ);

	csr = sh_wdt_read_csr();
	csr |= WTCSR_WT | clock_division_ratio;
	sh_wdt_write_csr(csr);

	sh_wdt_write_cnt(0);

	/*
	 * These processors have a bit of an inconsistent initialization
	 * process.. starting with SH-3, RSTS was moved to WTCSR, and the
	 * RSTCSR register was removed.
	 *
	 * On the SH-2 these semantics are even odder, as we have to deal
	 * with RSTCSR outright. See the 2.6 code for this.
	 */
	csr = sh_wdt_read_csr();
	csr |= WTCSR_TME;
	csr &= ~WTCSR_RSTS;
	sh_wdt_write_csr(csr);
}

/**
 * 	sh_wdt_stop - Stop the Watchdog
 *
 * 	Stops the watchdog.
 */
static void sh_wdt_stop(void)
{
	__u8 csr;

	del_timer(&timer);

	csr = sh_wdt_read_csr();
	csr &= ~WTCSR_TME;
	sh_wdt_write_csr(csr);
}

/**
 * 	sh_wdt_ping - Ping the Watchdog
 *
 *	@data: Unused
 *
 * 	Clears overflow bit, resets timer counter.
 */
static void sh_wdt_ping(unsigned long data)
{
	if (time_before(jiffies, next_heartbeat)) {
		__u8 csr;

		csr = sh_wdt_read_csr();
		csr &= ~WTCSR_IOVF;
		sh_wdt_write_csr(csr);

		sh_wdt_write_cnt(0);

		mod_timer(&timer, next_ping_period(clock_division_ratio));
	}
}

/**
 * 	sh_wdt_open - Open the Device
 *
 * 	@inode: inode of device
 * 	@file: file handle of device
 *
 * 	Watchdog device is opened and started.
 */
static int sh_wdt_open(struct inode *inode, struct file *file)
{
	if (test_and_set_bit(0, &shwdt_is_open))
		return -EBUSY;

	sh_wdt_start();

	return 0;
}

/**
 * 	sh_wdt_close - Close the Device
 *
 * 	@inode: inode of device
 * 	@file: file handle of device
 *
 * 	Watchdog device is closed and stopped.
 */
static int sh_wdt_close(struct inode *inode, struct file *file)
{
	if (!nowayout && shwdt_expect_close == 42) {
		sh_wdt_stop();
	} else {
		printk(KERN_CRIT "shwdt: Unexpected close, not stopping watchdog!\n");
		next_heartbeat = jiffies + (heartbeat * HZ);
	}

	clear_bit(0, &shwdt_is_open);
	shwdt_expect_close = 0;

	return 0;
}

/**
 * 	sh_wdt_write - Write to Device
 *
 * 	@file: file handle of device
 * 	@buf: buffer to write
 * 	@count: length of buffer
 * 	@ppos: offset
 *
 * 	Pings the watchdog on write.
 */
static ssize_t sh_wdt_write(struct file *file, const char *buf,
			    size_t count, loff_t *ppos)
{
	/* Can't seek (pwrite) on this device */
	if (ppos != &file->f_pos)
		return -ESPIPE;

	if (count) {
		size_t i;

		shwdt_expect_close = 0;

		for (i = 0; i != count; i++) {
			char c;
			if (get_user(c, buf + i))
				return -EFAULT;
			if (c == 'V')
				shwdt_expect_close = 42;
		}
		next_heartbeat = jiffies + (heartbeat * HZ);
	}

	return count;
}

/**
 * 	sh_wdt_ioctl - Query Device
 *
 * 	@inode: inode of device
 * 	@file: file handle of device
 * 	@cmd: watchdog command
 * 	@arg: argument
 *
 * 	Query basic information from the device or ping it, as outlined by the
 * 	watchdog API.
 */
static int sh_wdt_ioctl(struct inode *inode, struct file *file,
			unsigned int cmd, unsigned long arg)
{
	int new_timeout;

	switch (cmd) {
		case WDIOC_GETSUPPORT:
			if (copy_to_user((struct watchdog_info *)arg,
					  &sh_wdt_info,
					  sizeof(sh_wdt_info))) {
				return -EFAULT;
			}

			break;
		case WDIOC_GETSTATUS:
		case WDIOC_GETBOOTSTATUS:
			return put_user(0, (int *)arg);
		case WDIOC_KEEPALIVE:
			next_heartbeat = jiffies + (heartbeat * HZ);

			break;
		case WDIOC_SETTIMEOUT:
			if (get_user(new_timeout, (int *)arg))
				return -EFAULT;
			if (new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */
				return -EINVAL;
			heartbeat = new_timeout;
			next_heartbeat = jiffies + (heartbeat * HZ);
			/* Fall */
		case WDIOC_GETTIMEOUT:
			return put_user(heartbeat, (int *)arg);
		case WDIOC_SETOPTIONS:
		{
			int options, retval = -EINVAL;

			if (get_user(options, (int *)arg))
				return -EFAULT;

			if (options & WDIOS_DISABLECARD) {
				sh_wdt_stop();
				retval = 0;
			}

			if (options & WDIOS_ENABLECARD) {
				sh_wdt_start();
				retval = 0;
			}

			return retval;
		}
		default:
			return -ENOTTY;
	}

	return 0;
}

/**
 * 	sh_wdt_notify_sys - Notifier Handler
 *
 * 	@this: notifier block
 * 	@code: notifier event
 * 	@unused: unused
 *
 * 	Handles specific events, such as turning off the watchdog during a
 * 	shutdown event.
 */
static int sh_wdt_notify_sys(struct notifier_block *this,
			     unsigned long code, void *unused)
{
	if (code == SYS_DOWN || code == SYS_HALT) {
		sh_wdt_stop();
	}

	return NOTIFY_DONE;
}

static struct file_operations sh_wdt_fops = {
	owner:		THIS_MODULE,
	llseek:		no_llseek,
	write:		sh_wdt_write,
	ioctl:		sh_wdt_ioctl,
	open:		sh_wdt_open,
	release:	sh_wdt_close,
};

static struct watchdog_info sh_wdt_info = {
	options:		WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
	firmware_version:	0,
	identity:		"SH WDT",
};

static struct notifier_block sh_wdt_notifier = {
	sh_wdt_notify_sys,
	NULL,
	0
};

static struct miscdevice sh_wdt_miscdev = {
	minor:		WATCHDOG_MINOR,
	name:		"watchdog",
	fops:		&sh_wdt_fops,
};

/**
 * 	sh_wdt_init - Initialize module
 *
 * 	Registers the device and notifier handler. Actual device
 * 	initialization is handled by sh_wdt_open().
 */
static int __init sh_wdt_init(void)
{
	if (misc_register(&sh_wdt_miscdev)) {
		printk(KERN_ERR "shwdt: Can't register misc device\n");
		return -EINVAL;
	}

	if (!request_region(WTCNT, 1, "shwdt")) {
		printk(KERN_ERR "shwdt: Can't request WTCNT region\n");
		misc_deregister(&sh_wdt_miscdev);
		return -ENXIO;
	}

	if (!request_region(WTCSR, 1, "shwdt")) {
		printk(KERN_ERR "shwdt: Can't request WTCSR region\n");
		release_region(WTCNT, 1);
		misc_deregister(&sh_wdt_miscdev);
		return -ENXIO;
	}

	if (register_reboot_notifier(&sh_wdt_notifier)) {
		printk(KERN_ERR "shwdt: Can't register reboot notifier\n");
		release_region(WTCSR, 1);
		release_region(WTCNT, 1);
		misc_deregister(&sh_wdt_miscdev);
		return -EINVAL;
	}

	init_timer(&timer);
	timer.function = sh_wdt_ping;
	timer.data = 0;

	return 0;
}

/**
 * 	sh_wdt_exit - Deinitialize module
 *
 * 	Unregisters the device and notifier handler. Actual device
 * 	deinitialization is handled by sh_wdt_close().
 */
static void __exit sh_wdt_exit(void)
{
	unregister_reboot_notifier(&sh_wdt_notifier);
	release_region(WTCSR, 1);
	release_region(WTCNT, 1);
	misc_deregister(&sh_wdt_miscdev);
}

EXPORT_NO_SYMBOLS;

MODULE_PARM(nowayout,"i");
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
MODULE_PARM(clock_division_ratio, "i");
MODULE_PARM_DESC(clock_division_ratio, "Clock division ratio. Valid ranges are from 0x5 (1.31ms) to 0x7 (5.25ms). Defaults to 0x7.");

MODULE_AUTHOR("Paul Mundt <lethal@0xd6.org>");
MODULE_DESCRIPTION("SuperH watchdog driver");
MODULE_LICENSE("GPL");

module_init(sh_wdt_init);
module_exit(sh_wdt_exit);