1#!/bin/bash 2 3if test -n "$ZSH_VERSION"; then 4 CURRENT_SHELL=zsh 5elif test -n "$BASH_VERSION"; then 6 CURRENT_SHELL=bash 7elif test -n "$KSH_VERSION"; then 8 CURRENT_SHELL=ksh 9elif test -n "$FCEDIT"; then 10 CURRENT_SHELL=ksh 11elif test -n "$PS3"; then 12 CURRENT_SHELL=unknown 13else 14 CURRENT_SHELL=sh 15fi 16 17source "$HOME/.$CURRENT_SHELL"rc 18 19emulator="qemu" 20defpackman="apt-get" 21dockerInstall="true" 22DEFAULT_INSTALL="false" 23 24export RUSTUP_DIST_SERVER=${RUSTUP_DIST_SERVER:-https://rsproxy.cn} 25export RUSTUP_UPDATE_ROOT=${RUSTUP_UPDATE_ROOT:-https://rsproxy.cn/rustup} 26export RUST_VERSION="${RUST_VERSION:-nightly-2024-07-23}" 27 28banner() 29{ 30 echo "|------------------------------------------|" 31 echo "| Welcome to the DragonOS bootstrap |" 32 echo "|------------------------------------------|" 33} 34 35# 因为编码原因, 只有在vim打开该文件的时候对齐才是真的对齐 36congratulations() 37{ 38 echo "|-----------Congratulations!---------------|" 39 echo "| |" 40 echo "| 你成功安装了DragonOS所需的依赖项! |" 41 echo "| |" 42 echo "| 请[关闭]当前终端, 并[重新打开]一个终端 |" 43 echo "| 然后通过以下命令运行: |" 44 echo "| |" 45 echo "| make run |" 46 echo "| |" 47 echo "|------------------------------------------|" 48} 49 50#################################### 51# 当检测到ubuntu或Debian时，执行此函数 # 52# 参数:第一个参数为包管理器 # 53#################################### 54install_ubuntu_debian_pkg() 55{ 56 echo "检测到 Ubuntu/Debian" 57 echo "正在更新包管理器的列表..." 58 sudo "$1" update 59 echo "正在安装所需的包..." 60 sudo "$1" install -y \ 61 ca-certificates \ 62 curl wget \ 63 unzip \ 64 gnupg \ 65 lsb-release \ 66 llvm-dev libclang-dev clang gcc-multilib \ 67 gcc build-essential fdisk dosfstools dnsmasq bridge-utils iptables libssl-dev pkg-config \ 68 sphinx make git 69 # 必须分开安装，否则会出现错误 70 sudo "$1" install -y \ 71 gcc-riscv64-unknown-elf gcc-riscv64-linux-gnu gdb-multiarch 72 73 # 如果python3没有安装 74 if [ -z "$(which python3)" ]; then 75 echo "正在安装python3..." 76 sudo apt install -y python3 python3-pip 77 fi 78 79 if [ -z "$(which docker)" ] && [ "${dockerInstall}" = "true" ]; then 80 echo "正在安装docker..." 81 sudo apt install -y docker.io docker-compose 82 sudo groupadd docker 83 sudo usermod -aG docker $USER 84 sudo systemctl restart docker 85 elif [ -z ${dockerInstall} ]; then 86 echo "您传入--no-docker参数生效, 安装docker步骤被跳过." 87 elif [ -n "$(which docker)" ]; then 88 echo "您的计算机上已经安装了docker" 89 fi 90 91 if [ -z "$(which qemu-system-x86_64)" ]; then 92 echo "正在安装QEMU虚拟机..." 93 sudo $1 install -y qemu-system qemu-kvm 94 else 95 echo "QEMU已经在您的电脑上安装！" 96 fi 97 98} 99 100 101#################################### 102# 当检测到gentoo时，执行此函数 # 103#################################### 104gentoo() 105{ 106 pkgman="emerge" 107 echo "检测到Gentoo发行版" 108 echo "正在更新包管理器的列表..." 109 sudo "${pkgman}" --sync 110 echo "正在安装所需的包..." 111 sudo "${pkgman}" net-misc/curl net-misc/wget net-misc/bridge-utils net-dns/dnsmasq sys-apps/diffutils dev-util/pkgconf sys-apps/which app-arch/unzip sys-apps/util-linux sys-fs/dosfstools sys-devel/gcc dev-build/make sys-devel/flex sys-apps/texinfo dev-libs/gmp dev-libs/mpfr app-emulation/qemu dev-libs/mpc dev-libs/openssl 112} 113 114install_archlinux_pkg() 115{ 116 pkgman="pacman" 117 echo "检测到 ArchLinux" 118 echo "正在更新包管理器的列表..." 119 sudo "${pkgman}" -Sy 120 echo "正在安装所需的包..." 121 sudo "${pkgman}" -S --needed --noconfirm \ 122 curl wget bridge-utils dnsmasq \ 123 diffutils pkgconf which unzip util-linux dosfstools \ 124 gcc make flex texinfo gmp mpfr qemu-base \ 125 libmpc openssl 126 127} 128 129install_centos_pkg() 130{ 131 echo "检测到 Centos/Fedora/RHEL 8" 132 echo "正在更新包管理器的列表..." 133 sudo dnf update -y 134 echo "正在安装所需的包" 135 136 echo "正在安装Development Tools..." 137 sudo dnf groupinstall -y "Development Tools" 138 139 echo "正在安装LLVM和Clang..." 140 sudo dnf install -y llvm-devel clang-devel 141 142 echo "正在安装Clang和GCC..." 143 sudo dnf install -y clang gcc-c++ 144 145 echo "正在安装QEMU和KVM..." 146 sudo dnf install -y qemu qemu-kvm qemu-system-x86 147 148 echo "正在安装fdisk和redhat-lsb-core..." 149 sudo dnf install -y util-linux redhat-lsb-core 150 151 echo "正在安装Git..." 152 sudo dnf install -y git 153 154 echo "正在安装dosfstools..." 155 sudo dnf install -y dosfstools 156 157 echo "正在安装unzip..." 158 sudo dnf install -y unzip 159 160 echo "安装bridge utils" 161 sudo dnf install -y bridge-utils || sudo rpm -ivh http://mirror.centos.org/centos/7/os/x86_64/Packages/bridge-utils-1.5-9.el7.x86_64.rpm #Centos8 需要直接安装Binary 162 163 echo "安装dnsmasq" 164 sudo dnf install -y dnsmasq 165} 166 167install_osx_pkg() 168{ 169 echo "Detected OSX! 暂不支持Mac OSX的一键安装！" 170 exit 1 171} 172 173#################################################################################### 174# This function takes care of everything associated to rust, and the version manager 175# That controls it, it can install rustup and uninstall multirust as well as making 176# sure that the correct version of rustc is selected by rustup 177#################################################################################### 178rustInstall() { 179 # Check to see if multirust is installed, we don't want it messing with rustup 180 # In the future we can probably remove this but I believe it's good to have for now 181 if [ -e /usr/local/lib/rustlib/uninstall.sh ] ; then 182 echo "您的系统上似乎安装了multirust。" 183 echo "该工具已被维护人员弃用，并将导致问题。" 184 echo "如果您愿意，此脚本可以从系统中删除multirust" 185 printf "卸载 multirust (y/N):" 186 read multirust 187 if echo "$multirust" | grep -iq "^y" ;then 188 sudo /usr/local/lib/rustlib/uninstall.sh 189 else 190 echo "请手动卸载multistrust和任何其他版本的rust，然后重新运行bootstrap.sh" 191 exit 192 fi 193 fi 194 # If rustup is not installed we should offer to install it for them 195 if [ -z "$(which rustup)" ]; then 196 echo "正在安装Rust..." 197 #install rustup 198 curl https://sh.rustup.rs -sSf --retry 5 --retry-delay 5 | sh -s -- --default-toolchain ${RUST_VERSION} -y 199 # You have to add the rustup variables to the $PATH 200 echo "export PATH=\"\$HOME/.cargo/bin:\$PATH\"" >> ~/.bashrc 201 # source the variables so that we can execute rustup commands in the current shell 202 source ~/.cargo/env 203 source "$HOME/.cargo/env" 204 fi 205 # 206 if [ -z "$(which rustc)" ]; then 207 echo "Rust 还未被安装" 208 echo "请再次运行脚本，接受rustup安装" 209 echo "或通过以下方式手动安装rustc（不推荐）：" 210 echo "curl https://sh.rustup.rs -sSf | sh -s -- --default-toolchain $RUST_VERSION -y" 211 exit 212 else 213 local change_rust_src="" 214 if [ "$DEFAULT_INSTALL" = "true" ]; then 215 change_rust_src="true" 216 else 217 echo "是否为Rust换源为国内镜像源？(Tuna)" 218 echo "如果您在国内，我们推荐您这样做，以提升网络速度。" 219 echo "*WARNING* 这将会替换原有的镜像源设置。" 220 printf "(y/N): " 221 read change_src 222 if echo "$change_src" | grep -iq "^y" ;then 223 change_rust_src="true" 224 else 225 echo "取消换源，您原有的配置不会被改变。" 226 fi 227 fi 228 if [ "$change_rust_src" = "true" ]; then 229 echo "正在为rust换源" 230 bash change_rust_src.sh --sparse 231 fi 232 233 echo "正在安装DragonOS所需的rust组件...首次安装需要一些时间来更新索引，请耐心等待..." 234 cargo install cargo-binutils 235 cargo install bpf-linker 236 rustup toolchain install nightly-2023-08-15-x86_64-unknown-linux-gnu 237 rustup toolchain install $RUST_VERSION-x86_64-unknown-linux-gnu 238 rustup component add rust-src --toolchain $RUST_VERSION-x86_64-unknown-linux-gnu 239 rustup component add rust-src --toolchain nightly-2023-08-15-x86_64-unknown-linux-gnu 240 rustup target add x86_64-unknown-none --toolchain $RUST_VERSION-x86_64-unknown-linux-gnu 241 rustup target add x86_64-unknown-none --toolchain nightly-2023-08-15-x86_64-unknown-linux-gnu 242 rustup target add x86_64-unknown-linux-musl --toolchain nightly-2023-08-15-x86_64-unknown-linux-gnu 243 rustup target add x86_64-unknown-linux-musl --toolchain $RUST_VERSION-x86_64-unknown-linux-gnu 244 245 rustup toolchain install $RUST_VERSION-riscv64gc-unknown-linux-gnu --force-non-host 246 rustup toolchain install nightly-2023-08-15-riscv64gc-unknown-linux-gnu --force-non-host 247 rustup target add riscv64gc-unknown-none-elf --toolchain $RUST_VERSION-riscv64gc-unknown-linux-gnu 248 rustup target add riscv64imac-unknown-none-elf --toolchain $RUST_VERSION-riscv64gc-unknown-linux-gnu 249 rustup target add riscv64gc-unknown-none-elf --toolchain nightly-2023-08-15-riscv64gc-unknown-linux-gnu 250 rustup target add riscv64imac-unknown-none-elf --toolchain nightly-2023-08-15-riscv64gc-unknown-linux-gnu 251 252 rustup component add rust-src --toolchain nightly-x86_64-unknown-linux-gnu 253 rustup component add rust-src 254 rustup component add llvm-tools-preview 255 rustup default $RUST_VERSION 256 257 echo "Rust已经成功的在您的计算机上安装！请运行 source ~/.cargo/env 以使rust在当前窗口生效！" 258 fi 259} 260 261install_python_pkg() 262{ 263 echo "正在安装python依赖项..." 264 # 安装文档生成工具 265 sh -c "cd ../docs && pip3 install -r requirements.txt" 266} 267 268 269############# 脚本开始 ############## 270# 读取参数及选项，使用 -help 参数查看详细选项 271while true; do 272 if [ -z "$1" ]; then 273 break; 274 fi 275 echo "repeat" 276 case "$1" in 277 "--no-docker") 278 dockerInstall="" 279 ;; 280 "--default") 281 DEFAULT_INSTALL="true" 282 dockerInstall="" 283 ;; 284 "--help") 285 echo "--no-docker(not install docker): 该参数表示执行该脚本的过程中不单独安装docker." 286 exit 0 287 ;; 288 *) 289 echo "无法识别参数$1, 请传入 --help 参数查看提供的选项." 290 ;; 291 esac 292 shift 1 293done 294 295############ 开始执行 ############### 296banner # 开始横幅 297 298if [ "Darwin" == "$(uname -s)" ]; then 299 install_osx_pkg "$emulator" || exit 1 300else 301 # Here we will use package managers to determine which operating system the user is using. 302 303 # Suse and derivatives 304 if hash 2>/dev/null zypper; then 305 suse "$emulator" || exit 1 306 # Debian or any derivative of it 307 elif hash 2>/dev/null apt-get; then 308 install_ubuntu_debian_pkg "$defpackman" || exit 1 309 # Fedora 310 elif hash 2>/dev/null dnf; then 311 install_centos_pkg || exit 1 312 # Gentoo 313 elif hash 2>/dev/null emerge; then 314 gentoo "$emulator" || exit 1 315 # SolusOS 316 elif hash 2>/dev/null eopkg; then 317 solus "$emulator" || exit 1 318 # Arch linux 319 elif hash 2>/dev/null pacman; then 320 install_archlinux_pkg || exit 1 321 # FreeBSD 322 elif hash 2>/dev/null pkg; then 323 freebsd "$emulator" || exit 1 324 # Unsupported platform 325 else 326 printf "\e[31;1mFatal error: \e[0;31mUnsupported platform, please open an issue\[0m" || exit 1 327 fi 328fi 329 330# 安装rust 331rustInstall 332 333install_python_pkg 334 335# 安装dadk 336cargo install dadk || exit 1 337 338bashpath=$(cd `dirname $0`; pwd) 339 340# 编译安装musl交叉编译工具链 341bash ${bashpath}/install_musl_gcc.sh || (echo "musl交叉编译工具链安装失败" && exit 1) 342# 编译安装grub 343bash ${bashpath}/grub_auto_install.sh || (echo "grub安装失败" && exit 1) 344 345# 解决kvm权限问题 346USR=$USER 347sudo groupadd kvm || echo "kvm组已存在" 348sudo usermod -aG kvm $USR 349sudo chown $USR /dev/kvm 350 351congratulations 352