| /linux-6.6.21/arch/arm64/boot/dts/hisilicon/ |
| D | hikey970-pinctrl.dtsi | 11 #pinctrl-single,gpio-range-cells = <3>;
15 compatible = "pinctrl-single";
19 pinctrl-single,register-width = <0x20>;
20 pinctrl-single,function-mask = <0x7>;
22 pinctrl-single,gpio-range = <&range 0 82 0>;
25 pinctrl-single,pins = <
32 pinctrl-single,pins = <
41 pinctrl-single,pins = <
50 pinctrl-single,pins = <
59 pinctrl-single,pins = <
[all …]
|
| D | hikey960-pinctrl.dtsi | 13 #pinctrl-single,gpio-range-cells = <3>;
17 compatible = "pinctrl-single";
21 pinctrl-single,register-width = <0x20>;
22 pinctrl-single,function-mask = <0x7>;
24 pinctrl-single,gpio-range = <
29 pinctrl-single,pins = <
38 pinctrl-single,pins = <
44 pinctrl-single,pins = <
50 pinctrl-single,pins = <
58 pinctrl-single,pins = <
[all …]
|
| D | hikey-pinctrl.dtsi | 21 pinctrl-single,pins = <
27 pinctrl-single,pins = <
42 pinctrl-single,pins = <
52 pinctrl-single,pins = <
63 pinctrl-single,pins = <
73 pinctrl-single,pins = <
84 pinctrl-single,pins = <
105 pinctrl-single,pins = <
111 pinctrl-single,pins = <
117 pinctrl-single,pins = <
[all …]
|
| D | poplar-pinctrl.dtsi | 20 pinctrl-single,pins = <
31 pinctrl-single,bias-pulldown = <
34 pinctrl-single,bias-pullup = <
37 pinctrl-single,slew-rate = <
40 pinctrl-single,drive-strength = <
46 pinctrl-single,pins = <
49 pinctrl-single,bias-pulldown = <
52 pinctrl-single,bias-pullup = <
55 pinctrl-single,slew-rate = <
58 pinctrl-single,drive-strength = <
[all …]
|
| /linux-6.6.21/arch/arm/boot/dts/hisilicon/ |
| D | hi3620-hi4511.dts | 70 pinctrl-single,pins = <
76 pinctrl-single,pins = <
82 pinctrl-single,pins = <
88 pinctrl-single,pins = <
94 pinctrl-single,pins = <
100 pinctrl-single,pins = <
106 pinctrl-single,pins = <
112 pinctrl-single,pins = <
118 pinctrl-single,pins = <
124 pinctrl-single,pins = <
[all …]
|
| /linux-6.6.21/arch/arm/boot/dts/ti/omap/ |
| D | am335x-pocketbeagle.dts | 208 compatible = "pinconf-single";
218 pinctrl-single,pins = <
221 pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
222 pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
227 pinctrl-single,pins = <
230 pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
231 pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
236 pinctrl-single,pins = <
239 pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
240 pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
[all …]
|
| D | omap3-ha-common.dtsi | 21 pinctrl-single,pins = <
27 pinctrl-single,pins = <
33 pinctrl-single,pins = <
39 pinctrl-single,pins = <
45 pinctrl-single,pins = <
51 pinctrl-single,pins = <
57 pinctrl-single,pins = <
66 pinctrl-single,pins = <
|
| D | am335x-myirtech-myd.dts | 308 pinctrl-single,pins = <
315 pinctrl-single,pins = <
322 pinctrl-single,pins = <
329 pinctrl-single,pins = <
336 pinctrl-single,pins = <
342 pinctrl-single,pins = <
348 pinctrl-single,pins = <
365 pinctrl-single,pins = <
382 pinctrl-single,pins = <
389 pinctrl-single,pins = <
[all …]
|
| D | omap4-var-om44customboard.dtsi | 64 pinctrl-single,pins = <
73 pinctrl-single,pins = <
82 pinctrl-single,pins = <
88 pinctrl-single,pins = <
121 pinctrl-single,pins = <
129 pinctrl-single,pins = <
136 pinctrl-single,pins = <
148 pinctrl-single,pins = <
155 pinctrl-single,pins = <
161 pinctrl-single,pins = <
[all …]
|
| D | omap4-panda-es.dts | 33 pinctrl-single,pins = <
42 pinctrl-single,pins = <
48 pinctrl-single,pins = <
54 pinctrl-single,pins = <
61 pinctrl-single,pins = <
71 pinctrl-single,pins = <
101 pinctrl-single,pins = <
|
| D | omap3-gta04.dtsi | 204 compatible = "pinctrl-single";
208 pinctrl-single,bit-per-mux;
209 pinctrl-single,register-width = <32>;
210 pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */
216 pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */
222 compatible = "pinctrl-single";
226 pinctrl-single,bit-per-mux;
227 pinctrl-single,register-width = <32>;
228 pinctrl-single,function-mask = <0x81>; /* TV out pin control */
234 pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */
[all …]
|
| /linux-6.6.21/Documentation/devicetree/bindings/pinctrl/ |
| D | pinctrl-single.yaml | 4 $id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml#
13 Some pin controller devices use a single register for one or more pins. The
22 - pinctrl-single
23 - pinconf-single
34 - const: pinctrl-single
56 pinctrl-single,bit-per-mux:
60 pinctrl-single,function-mask:
64 pinctrl-single,function-off:
68 pinctrl-single,register-width:
73 pinctrl-single,gpio-range:
[all …]
|
| /linux-6.6.21/arch/mips/boot/dts/ralink/ |
| D | mt7628a.dtsi | 45 compatible = "pinctrl-single";
50 pinctrl-single,bit-per-mux;
51 pinctrl-single,register-width = <32>;
52 pinctrl-single,function-mask = <0x1>;
55 pinctrl-single,bits = <0x0 0x0 0x3>;
59 pinctrl-single,bits = <0x0 0x0 0x30>;
63 pinctrl-single,bits = <0x0 0x40 0xc0>;
67 pinctrl-single,bits = <0x0 0x0 0x300>;
71 pinctrl-single,bits = <0x0 0x0 0xc00>;
75 pinctrl-single,bits = <0x0 0x400 0xc00>;
[all …]
|
| /linux-6.6.21/arch/arm64/boot/dts/broadcom/stingray/ |
| D | stingray-pinctrl.dtsi | 36 compatible = "pinconf-single";
38 pinctrl-single,register-width = <32>;
44 compatible = "pinctrl-single";
48 pinctrl-single,register-width = <32>;
49 pinctrl-single,function-mask = <0xf>;
50 pinctrl-single,gpio-range = <
55 #pinctrl-single,gpio-range-cells = <3>;
60 pinctrl-single,pins = <
67 pinctrl-single,pins = <
123 pinctrl-single,pins = <
[all …]
|
| /linux-6.6.21/arch/arm/boot/dts/intel/pxa/ |
| D | pxa300-raumfeld-controller.dts | 132 st,click-single-x;
133 st,click-single-y;
134 st,click-single-z;
207 pinctrl-single,pins = <
210 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
214 pinctrl-single,pins = <
217 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
221 pinctrl-single,pins = <
224 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
228 pinctrl-single,pins = <
[all …]
|
| D | pxa300-raumfeld-common.dtsi | 298 pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>;
299 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
303 pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>;
304 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
308 pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>;
309 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
313 pinctrl-single,pins = <
317 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
321 pinctrl-single,pins = <
326 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
[all …]
|
| /linux-6.6.21/arch/arm64/boot/dts/ti/ |
| D | k3-am62-verdin.dtsi | 182 pinctrl-single,pins = <
189 pinctrl-single,pins = <
196 pinctrl-single,pins = <
203 pinctrl-single,pins = <
210 pinctrl-single,pins = <
217 pinctrl-single,pins = <
224 pinctrl-single,pins = <
231 pinctrl-single,pins = <
238 pinctrl-single,pins = <
245 pinctrl-single,pins = <
[all …]
|
| D | k3-am642-tqma64xxl-mbax4xxl.dts | 453 pinctrl-single,pins = <
482 pinctrl-single,pins = <
494 pinctrl-single,pins = <
502 pinctrl-single,pins = <
531 pinctrl-single,pins = <
538 pinctrl-single,pins = <
549 pinctrl-single,pins = <
558 pinctrl-single,pins = <
567 pinctrl-single,pins = <
588 pinctrl-single,pins = <
[all …]
|
| D | k3-am642-phyboard-electra-rdk.dts | 110 pinctrl-single,pins = <
116 pinctrl-single,pins = <
122 pinctrl-single,pins = <
129 pinctrl-single,pins = <
136 pinctrl-single,pins = <
143 pinctrl-single,pins = <
150 pinctrl-single,pins = <
163 pinctrl-single,pins = <
170 pinctrl-single,pins = <
179 pinctrl-single,pins = <
[all …]
|
| D | k3-am65-iot2050-common.dtsi | 118 pinctrl-single,pins = <
127 pinctrl-single,pins = <
136 pinctrl-single,pins = <
143 pinctrl-single,pins = <
150 pinctrl-single,pins = <
159 pinctrl-single,pins = <
168 pinctrl-single,pins = <
183 pinctrl-single,pins = <
198 pinctrl-single,pins = <
211 pinctrl-single,pins = <
[all …]
|
| D | k3-j721e-common-proc-board.dts | 190 pinctrl-single,pins = <
199 pinctrl-single,pins = <
206 pinctrl-single,pins = <
213 pinctrl-single,pins = <
220 pinctrl-single,pins = <
226 pinctrl-single,pins = <
240 pinctrl-single,pins = <
246 pinctrl-single,pins = <
253 pinctrl-single,pins = <
259 pinctrl-single,pins = <
[all …]
|
| /linux-6.6.21/kernel/ |
| D | cpu.c | 75 bool single; member
129 int (*single)(unsigned int cpu); member
134 int (*single)(unsigned int cpu); member
155 return bringup ? !step->startup.single : !step->teardown.single; in cpuhp_step_empty()
192 cb = bringup ? step->startup.single : step->teardown.single; in cpuhp_invoke_callback()
709 st->single = false; in cpuhp_set_state()
753 if (!st->single && st->state == st->target) in __cpuhp_kick_ap()
1072 if (st->single) { in cpuhp_thread_fun()
1144 st->single = true; in cpuhp_invoke_ap_callback()
2084 .startup.single = NULL,
[all …]
|
| /linux-6.6.21/Documentation/ABI/testing/ |
| D | debugfs-dell-wmi-ddv | 12 - fan type (single byte)
28 - thermal type (single byte)
29 - current temperature (single byte)
30 - min. temperature (single byte)
31 - max. temperature (single byte)
32 - unknown field (single byte)
|
| /linux-6.6.21/arch/arm/boot/dts/ti/davinci/ |
| D | da850.dtsi | 155 compatible = "pinctrl-single";
158 pinctrl-single,bit-per-mux;
159 pinctrl-single,register-width = <32>;
160 pinctrl-single,function-mask = <0xf>;
162 pinctrl-single,gpio-range = <&range 0 17 0x8>,
170 #pinctrl-single,gpio-range-cells = <3>;
174 pinctrl-single,bits = <
180 pinctrl-single,bits = <
186 pinctrl-single,bits = <
192 pinctrl-single,bits = <
[all …]
|
| /linux-6.6.21/scripts/gcc-plugins/ |
| D | Makefile | 39 plugin-single := $(foreach m, $(GCC_PLUGIN), $(if $($(m:%.so=%-objs)),,$(m)))
40 plugin-multi := $(filter-out $(plugin-single), $(GCC_PLUGIN))
43 targets += $(plugin-single) $(plugin-multi) $(plugin-objs)
46 plugin-single := $(addprefix $(obj)/, $(plugin-single))
53 $(plugin-single): $(obj)/%.so: $(src)/%.c FORCE
|