/linux-6.6.21/drivers/hv/ |
D | hv.c | 270 union hv_synic_scontrol sctrl; in hv_synic_enable_regs() local 333 sctrl.as_uint64 = hv_get_register(HV_REGISTER_SCONTROL); in hv_synic_enable_regs() 334 sctrl.enable = 1; in hv_synic_enable_regs() 336 hv_set_register(HV_REGISTER_SCONTROL, sctrl.as_uint64); in hv_synic_enable_regs() 358 union hv_synic_scontrol sctrl; in hv_synic_disable_regs() local 400 sctrl.as_uint64 = hv_get_register(HV_REGISTER_SCONTROL); in hv_synic_disable_regs() 401 sctrl.enable = 0; in hv_synic_disable_regs() 402 hv_set_register(HV_REGISTER_SCONTROL, sctrl.as_uint64); in hv_synic_disable_regs()
|
/linux-6.6.21/Documentation/devicetree/bindings/phy/ |
D | hisilicon,hi3670-usb3.yaml | 30 hisilicon,sctrl-syscon: 47 - hisilicon,sctrl-syscon 61 hisilicon,sctrl-syscon = <&sctrl>;
|
/linux-6.6.21/drivers/slimbus/ |
D | qcom-ctrl.c | 278 static int qcom_clk_pause_wakeup(struct slim_controller *sctrl) in qcom_clk_pause_wakeup() argument 280 struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); in qcom_clk_pause_wakeup() 325 static int qcom_xfer_msg(struct slim_controller *sctrl, in qcom_xfer_msg() argument 328 struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); in qcom_xfer_msg() 389 static int qcom_set_laddr(struct slim_controller *sctrl, in qcom_set_laddr() argument 392 struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); in qcom_set_laddr() 490 struct slim_controller *sctrl; in qcom_slim_probe() local 515 sctrl = &ctrl->ctrl; in qcom_slim_probe() 516 sctrl->dev = &pdev->dev; in qcom_slim_probe() 525 sctrl->set_laddr = qcom_set_laddr; in qcom_slim_probe() [all …]
|
D | qcom-ngd-ctrl.c | 786 static int qcom_slim_ngd_xfer_msg(struct slim_controller *sctrl, in qcom_slim_ngd_xfer_msg() argument 789 struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(sctrl->dev); in qcom_slim_ngd_xfer_msg() 848 ret = slim_alloc_txn_tid(sctrl, txn); in qcom_slim_ngd_xfer_msg() 896 dev_err(sctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", txn->mc, in qcom_slim_ngd_xfer_msg() 905 dev_err(sctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", in qcom_slim_ngd_xfer_msg()
|
/linux-6.6.21/drivers/gpu/drm/nouveau/nvkm/subdev/clk/ |
D | mcp77.c | 35 u32 cctrl, sctrl; member 250 clk->sctrl = (divs + P2) << 16; in mcp77_clk_calc() 254 clk->sctrl = P1 << 16; in mcp77_clk_calc() 273 clk->scoef, clk->spost, clk->sctrl); in mcp77_clk_calc() 338 nvkm_mask(device, 0x4020, 0x00070000, clk->sctrl); in mcp77_clk_prog() 343 nvkm_wr32(device, 0x4020, 0x80000000 | clk->sctrl); in mcp77_clk_prog()
|
/linux-6.6.21/arch/arm64/boot/dts/hisilicon/ |
D | hi3670.dtsi | 173 sctrl: sctrl@fff0a000 { label 174 compatible = "hisilicon,hi3670-sctrl", "syscon"; 522 clocks = <&sctrl HI3670_PCLK_GPIO18>; 535 clocks = <&sctrl HI3670_PCLK_GPIO19>; 575 clocks = <&sctrl HI3670_PCLK_AO_GPIO0>; 589 clocks = <&sctrl HI3670_PCLK_AO_GPIO1>; 603 clocks = <&sctrl HI3670_PCLK_AO_GPIO2>; 617 clocks = <&sctrl HI3670_PCLK_AO_GPIO3>; 631 clocks = <&sctrl HI3670_PCLK_AO_GPIO4>; 645 clocks = <&sctrl HI3670_PCLK_AO_GPIO5>; [all …]
|
D | hi3660.dtsi | 368 sctrl: sctrl@fff0a000 { label 369 compatible = "hisilicon,hi3660-sctrl", "syscon"; 886 clocks = <&sctrl HI3660_PCLK_AO_GPIO0>; 900 clocks = <&sctrl HI3660_PCLK_AO_GPIO1>; 914 clocks = <&sctrl HI3660_PCLK_AO_GPIO2>; 928 clocks = <&sctrl HI3660_PCLK_AO_GPIO3>; 942 clocks = <&sctrl HI3660_PCLK_AO_GPIO4>; 956 clocks = <&sctrl HI3660_PCLK_AO_GPIO5>; 968 clocks = <&sctrl HI3660_PCLK_AO_GPIO6>; 1072 hisilicon,peripheral-syscon = <&sctrl>;
|
D | hi6220.dtsi | 291 compatible = "hisilicon,hi6220-acpu-sctrl", "syscon";
|
/linux-6.6.21/sound/pci/ |
D | ens1370.c | 377 unsigned int sctrl; /* serial control register */ member 809 ensoniq->sctrl |= what; in snd_ensoniq_trigger() 811 ensoniq->sctrl &= ~what; in snd_ensoniq_trigger() 812 outl(ensoniq->sctrl, ES_REG(ensoniq, SERIAL)); in snd_ensoniq_trigger() 877 ensoniq->sctrl &= ~(ES_P1_LOOP_SEL | ES_P1_PAUSE | ES_P1_SCT_RLD | ES_P1_MODEM); in snd_ensoniq_playback1_prepare() 878 ensoniq->sctrl |= ES_P1_INT_EN | ES_P1_MODEO(mode); in snd_ensoniq_playback1_prepare() 879 outl(ensoniq->sctrl, ES_REG(ensoniq, SERIAL)); in snd_ensoniq_playback1_prepare() 918 ensoniq->sctrl &= ~(ES_P2_LOOP_SEL | ES_P2_PAUSE | ES_P2_DAC_SEN | in snd_ensoniq_playback2_prepare() 920 ensoniq->sctrl |= ES_P2_INT_EN | ES_P2_MODEO(mode) | in snd_ensoniq_playback2_prepare() 922 outl(ensoniq->sctrl, ES_REG(ensoniq, SERIAL)); in snd_ensoniq_playback2_prepare() [all …]
|
/linux-6.6.21/drivers/phy/hisilicon/ |
D | phy-hi3670-usb3.c | 130 struct regmap *sctrl; member 327 if (!priv->sctrl) { in hi3670_is_abbclk_selected() 332 if (regmap_read(priv->sctrl, SCTRL_SCDEEPSLEEPED, ®)) { in hi3670_is_abbclk_selected() 614 priv->sctrl = syscon_regmap_lookup_by_phandle(dev->of_node, in hi3670_phy_probe() 616 if (IS_ERR(priv->sctrl)) { in hi3670_phy_probe() 618 return PTR_ERR(priv->sctrl); in hi3670_phy_probe()
|
/linux-6.6.21/arch/arm64/boot/dts/bitmain/ |
D | bm1880.dtsi | 91 sctrl: system-controller@50010000 { label 92 compatible = "bitmain,bm1880-sctrl", "syscon",
|
/linux-6.6.21/Documentation/devicetree/bindings/clock/ |
D | hi3670-clock.txt | 14 - "hisilicon,hi3670-sctrl"
|
D | hi3660-clock.txt | 14 - "hisilicon,hi3660-sctrl"
|
D | hi6220-clock.txt | 14 - "hisilicon,hi6220-acpu-sctrl"
|
/linux-6.6.21/drivers/isdn/hardware/mISDN/ |
D | hfcpci.c | 90 unsigned char sctrl; member 174 hc->hw.sctrl |= SCTRL_MODE_NT; /* NT-MODE */ in hfcpci_setmode() 178 hc->hw.sctrl &= ~SCTRL_MODE_NT; /* TE-MODE */ in hfcpci_setmode() 185 Write_hfc(hc, HFCPCI_SCTRL, hc->hw.sctrl); in hfcpci_setmode() 231 hc->hw.sctrl = 0x40; /* set tx_lo mode, error in datasheet ! */ in reset_hfcpci() 1288 hc->hw.sctrl &= ~SCTRL_B2_ENA; in mode_hfcpci() 1291 hc->hw.sctrl &= ~SCTRL_B1_ENA; in mode_hfcpci() 1320 hc->hw.sctrl |= SCTRL_B2_ENA; in mode_hfcpci() 1326 hc->hw.sctrl |= SCTRL_B1_ENA; in mode_hfcpci() 1355 hc->hw.sctrl |= SCTRL_B2_ENA; in mode_hfcpci() [all …]
|
D | hfcsusb.c | 687 __u8 conhdlc, sctrl, sctrl_r; in hfcsusb_setup_bch() local 734 sctrl = 0x40 + ((hw->protocol == ISDN_P_TE_S0) ? 0x00 : 0x04); in hfcsusb_setup_bch() 737 sctrl |= 1; in hfcsusb_setup_bch() 741 sctrl |= 2; in hfcsusb_setup_bch() 744 write_reg(hw, HFCUSB_SCTRL, sctrl); in hfcsusb_setup_bch()
|