| /linux-6.6.21/drivers/comedi/drivers/ |
| D | jr3_pci.h | 17 static inline s16 get_s16(const s32 __iomem *p) in get_s16()
22 static inline void set_s16(s32 __iomem *p, s16 val) in set_s16()
49 s32 raw_data;
50 s32 reserved[2];
58 s32 fx;
59 s32 fy;
60 s32 fz;
61 s32 mx;
62 s32 my;
63 s32 mz;
[all …]
|
| /linux-6.6.21/drivers/staging/media/atomisp/pci/isp/kernels/eed1_8/ |
| D | ia_css_eed1_8_types.h | 45 s32 rbzp_strength; /** Strength of zipper reduction. */
47 s32 fcstrength; /** Strength of false color reduction. */
48 …s32 fcthres_0; /** Threshold to prevent chroma coring due to noise or green disparity in dark regi…
49 …s32 fcthres_1; /** Threshold to prevent chroma coring due to noise or green disparity in bright re…
50 s32 fc_sat_coef; /** How much color saturation to maintain in high color saturation region. */
51 s32 fc_coring_prm; /** Chroma coring coefficient for tint color suppression. */
53 s32 aerel_thres0; /** Threshold for Non-Directional Reliability at dark region. */
54 s32 aerel_gain0; /** Gain for Non-Directional Reliability at dark region. */
55 s32 aerel_thres1; /** Threshold for Non-Directional Reliability at bright region. */
56 s32 aerel_gain1; /** Gain for Non-Directional Reliability at bright region. */
[all …]
|
| D | ia_css_eed1_8_param.h | 116 s32 rbzp_strength;
118 s32 fcstrength;
119 s32 fcthres_0;
120 s32 fc_sat_coef;
121 s32 fc_coring_prm;
122 s32 fc_slope;
124 s32 aerel_thres0;
125 s32 aerel_gain0;
126 s32 aerel_thres_diff;
127 s32 aerel_gain_diff;
[all …]
|
| /linux-6.6.21/include/linux/ |
| D | time32.h | 29 s32 offset;
30 s32 freq;
31 s32 maxerror;
32 s32 esterror;
33 s32 status;
34 s32 constant;
35 s32 precision;
36 s32 tolerance;
38 s32 tick;
39 s32 ppsfreq;
[all …]
|
| D | pm_qos.h | 54 s32 target_value; /* Do not change to 64 bit */
55 s32 default_value;
56 s32 no_constraint_value;
68 s32 flags; /* Do not change to 64 bit */
73 s32 effective_flags; /* Do not change to 64 bit */
139 s32 pm_qos_read_value(struct pm_qos_constraints *c);
144 enum pm_qos_req_action action, s32 val);
147 s32 cpu_latency_qos_limit(void);
149 void cpu_latency_qos_add_request(struct pm_qos_request *req, s32 value);
150 void cpu_latency_qos_update_request(struct pm_qos_request *req, s32 new_value);
[all …]
|
| /linux-6.6.21/drivers/staging/media/atomisp/pci/isp/kernels/bnlm/ |
| D | ia_css_bnlm_types.h | 35 s32 rad_x_origin; /** Initial x coordinate for a radius calculation */
36 s32 rad_y_origin; /** Initial x coordinate for a radius calculation */
38 s32 avg_min_th;
40 s32 max_min_th;
46 s32 exp_coeff_a;
48 s32 exp_coeff_c;
52 s32 nl_th[3]; /** Detail thresholds */
55 s32 match_quality_max_idx[4];
59 s32 mu_root_lut_thr[15];
60 s32 mu_root_lut_val[16];
[all …]
|
| /linux-6.6.21/drivers/staging/media/atomisp/pci/isp/kernels/bnr/bnr2_2/ |
| D | ia_css_bnr2_2_param.h | 23 s32 d_var_gain_r;
24 s32 d_var_gain_g;
25 s32 d_var_gain_b;
26 s32 d_var_gain_slope_r;
27 s32 d_var_gain_slope_g;
28 s32 d_var_gain_slope_b;
29 s32 n_var_gain_r;
30 s32 n_var_gain_g;
31 s32 n_var_gain_b;
32 s32 n_var_gain_slope_r;
[all …]
|
| D | ia_css_bnr2_2_types.h | 36 s32 d_var_gain_r;
37 s32 d_var_gain_g;
38 s32 d_var_gain_b;
42 s32 d_var_gain_slope_r;
43 s32 d_var_gain_slope_g;
44 s32 d_var_gain_slope_b;
48 s32 n_var_gain_r;
49 s32 n_var_gain_g;
50 s32 n_var_gain_b;
54 s32 n_var_gain_slope_r;
[all …]
|
| /linux-6.6.21/drivers/net/ethernet/intel/e1000e/ |
| D | phy.h | 7 s32 e1000e_check_downshift(struct e1000_hw *hw);
8 s32 e1000_check_polarity_m88(struct e1000_hw *hw);
9 s32 e1000_check_polarity_igp(struct e1000_hw *hw);
10 s32 e1000_check_polarity_ife(struct e1000_hw *hw);
11 s32 e1000e_check_reset_block_generic(struct e1000_hw *hw);
12 s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
13 s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
14 s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw);
15 s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
16 s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
[all …]
|
| D | mac.h | 7 s32 e1000e_blink_led_generic(struct e1000_hw *hw);
8 s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
9 s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
10 s32 e1000e_check_for_serdes_link(struct e1000_hw *hw);
11 s32 e1000e_cleanup_led_generic(struct e1000_hw *hw);
12 s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
13 s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
14 s32 e1000e_force_mac_fc(struct e1000_hw *hw);
15 s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
16 s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
[all …]
|
| /linux-6.6.21/drivers/staging/media/atomisp/pci/isp/kernels/ctc/ctc1_5/ |
| D | ia_css_ctc1_5_param.h | 24 s32 y0;
25 s32 y1;
26 s32 y2;
27 s32 y3;
28 s32 y4;
29 s32 y5;
30 s32 ce_gain_exp;
31 s32 x1;
32 s32 x2;
33 s32 x3;
[all …]
|
| /linux-6.6.21/drivers/staging/media/atomisp/pci/isp/kernels/ynr/ynr_1.0/ |
| D | ia_css_ynr_param.h | 23 s32 threshold;
24 s32 gain_all;
25 s32 gain_dir;
26 s32 threshold_cb;
27 s32 threshold_cr;
32 s32 dirthreshold_s;
33 s32 dirthreshold_g;
34 s32 dirthreshold_width_log2;
35 s32 dirthreshold_width;
36 s32 detailgain;
[all …]
|
| /linux-6.6.21/drivers/media/platform/verisilicon/ |
| D | rockchip_av1_filmgrain.c | 5 static const s32 gaussian_sequence[2048] = {
195 static inline s32 clamp(s32 value, s32 low, s32 high) in clamp()
200 static inline s32 round_power_of_two(const s32 val, s32 n) in round_power_of_two()
202 const s32 a = (s32)1 << (n - 1); in round_power_of_two()
227 static inline s32 rockchip_av1_get_random_number(u16 random_register) in rockchip_av1_get_random_number()
232 void rockchip_av1_generate_luma_grain_block(s32 (*luma_grain_block)[73][82], in rockchip_av1_generate_luma_grain_block()
233 s32 bitdepth, in rockchip_av1_generate_luma_grain_block()
235 s32 grain_scale_shift, in rockchip_av1_generate_luma_grain_block()
236 s32 ar_coeff_lag, in rockchip_av1_generate_luma_grain_block()
237 s32 (*ar_coeffs_y)[24], in rockchip_av1_generate_luma_grain_block()
[all …]
|
| D | rockchip_av1_filmgrain.h | 8 void rockchip_av1_generate_luma_grain_block(s32 (*luma_grain_block)[73][82],
9 s32 bitdepth,
11 s32 grain_scale_shift,
12 s32 ar_coeff_lag,
13 s32 (*ar_coeffs_y)[24],
14 s32 ar_coeff_shift,
15 s32 grain_min,
16 s32 grain_max,
19 void rockchip_av1_generate_chroma_grain_block(s32 (*luma_grain_block)[73][82],
20 s32 (*cb_grain_block)[38][44],
[all …]
|
| /linux-6.6.21/drivers/net/ethernet/intel/igb/ |
| D | e1000_phy.h | 20 s32 igb_check_downshift(struct e1000_hw *hw);
21 s32 igb_check_reset_block(struct e1000_hw *hw);
22 s32 igb_copper_link_setup_igp(struct e1000_hw *hw);
23 s32 igb_copper_link_setup_m88(struct e1000_hw *hw);
24 s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw);
25 s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw);
26 s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw);
27 s32 igb_get_cable_length_m88(struct e1000_hw *hw);
28 s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw);
29 s32 igb_get_cable_length_igp_2(struct e1000_hw *hw);
[all …]
|
| /linux-6.6.21/drivers/pinctrl/tegra/ |
| D | pinctrl-tegra.h | 144 s32 mux_reg;
145 s32 pupd_reg;
146 s32 tri_reg;
147 s32 drv_reg;
152 s32 mux_bit:6;
153 s32 pupd_bit:6;
154 s32 tri_bit:6;
155 s32 einput_bit:6;
156 s32 odrain_bit:6;
157 s32 lock_bit:6;
[all …]
|
| /linux-6.6.21/drivers/macintosh/ |
| D | windfarm_pid.h | 32 s32 gd, gp, gr; /* PID gains */
33 s32 itarget; /* PID input target */
34 s32 min,max; /* min and max target values */
40 s32 target; /* current target value */
41 s32 samples[WF_PID_MAX_HISTORY]; /* samples history buffer */
42 s32 errors[WF_PID_MAX_HISTORY]; /* error history buffer */
48 extern s32 wf_pid_run(struct wf_pid_state *st, s32 sample);
65 s32 gd, gp, gr; /* PID gains */
66 s32 pmaxadj; /* PID max power adjust */
67 s32 ttarget; /* PID input target */
[all …]
|
| /linux-6.6.21/drivers/staging/media/atomisp/pci/isp/kernels/tdf/tdf_1.0/ |
| D | ia_css_tdf_types.h | 34 s32 thres_flat_table[64]; /** Final optimized strength table of NR for flat region. */
35 s32 thres_detail_table[64]; /** Final optimized strength table of NR for detail region. */
36 s32 epsilon_0; /** Coefficient to control variance for dark area (for flat region). */
37 s32 epsilon_1; /** Coefficient to control variance for bright area (for flat region). */
38 s32 eps_scale_text; /** Epsilon scaling coefficient for texture region. */
39 s32 eps_scale_edge; /** Epsilon scaling coefficient for edge region. */
40 s32 sepa_flat; /** Threshold to judge flat (edge < m_Flat_thre). */
41 s32 sepa_edge; /** Threshold to judge edge (edge > m_Edge_thre). */
42 s32 blend_flat; /** Blending ratio at flat region. */
43 s32 blend_text; /** Blending ratio at texture region. */
[all …]
|
| /linux-6.6.21/drivers/net/ethernet/intel/ixgbe/ |
| D | ixgbe_common.h | 11 s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw);
12 s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw);
13 s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw);
14 s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
15 s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
17 s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr);
20 s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw);
22 s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
24 s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
25 s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
[all …]
|
| D | ixgbe_phy.h | 124 s32 ixgbe_mii_bus_init(struct ixgbe_hw *hw);
126 s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
127 s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw);
128 s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
130 s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
132 s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
134 s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
136 s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw);
137 s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
140 s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
[all …]
|
| /linux-6.6.21/arch/arm/crypto/ |
| D | curve25519-core.S | 306 vmull.s32 q12, d2, d2
307 vmlal.s32 q12, d11, d1
308 vmlal.s32 q12, d12, d0
309 vmlal.s32 q12, d13, d23
310 vmlal.s32 q12, d16, d22
311 vmlal.s32 q12, d7, d21
312 vmull.s32 q10, d2, d11
313 vmlal.s32 q10, d4, d1
314 vmlal.s32 q10, d13, d0
315 vmlal.s32 q10, d6, d23
[all …]
|
| /linux-6.6.21/drivers/staging/media/atomisp/pci/isp/kernels/ctc/ctc2/ |
| D | ia_css_ctc2_types.h | 30 s32 y_y0;
31 s32 y_y1;
32 s32 y_y2;
33 s32 y_y3;
34 s32 y_y4;
35 s32 y_y5;
39 s32 y_x1;
40 s32 y_x2;
41 s32 y_x3;
42 s32 y_x4;
[all …]
|
| /linux-6.6.21/drivers/net/ethernet/intel/ixgbevf/ |
| D | vf.h | 20 s32 (*init_hw)(struct ixgbe_hw *);
21 s32 (*reset_hw)(struct ixgbe_hw *);
22 s32 (*start_hw)(struct ixgbe_hw *);
23 s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
25 s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
26 s32 (*stop_adapter)(struct ixgbe_hw *);
27 s32 (*get_bus_info)(struct ixgbe_hw *);
28 s32 (*negotiate_api_version)(struct ixgbe_hw *hw, int api);
31 s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool);
32 s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
[all …]
|
| /linux-6.6.21/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/ |
| D | phy_qmath.c | 28 s32 result; in qm_muls16()
32 result = ((s32) (op1) * (s32) (op2)); in qm_muls16()
42 s32 qm_add32(s32 op1, s32 op2) in qm_add32()
44 s32 result; in qm_add32()
62 s32 temp = (s32) op1 + (s32) op2; in qm_add16()
63 if (temp > (s32) 0x7fff) in qm_add16()
65 else if (temp < (s32) 0xffff8000) in qm_add16()
81 s32 temp = (s32) op1 - (s32) op2; in qm_sub16()
82 if (temp > (s32) 0x7fff) in qm_sub16()
84 else if (temp < (s32) 0xffff8000) in qm_sub16()
[all …]
|
| /linux-6.6.21/drivers/staging/media/atomisp/pci/isp/kernels/ynr/ynr_2/ |
| D | ia_css_ynr2_param.h | 23 s32 edge_sense_gain_0;
24 s32 edge_sense_gain_1;
25 s32 corner_sense_gain_0;
26 s32 corner_sense_gain_1;
31 s32 gain_exp;
36 s32 gain_pos_0;
37 s32 gain_pos_1;
38 s32 gain_neg_0;
39 s32 gain_neg_1;
40 s32 crop_pos_0;
[all …]
|