| /linux-6.6.21/drivers/comedi/drivers/ |
| D | ni_6527.c | 274 unsigned int rising, in ni6527_set_edge_detection() argument
279 rising &= mask; in ni6527_set_edge_detection()
285 rising |= readb(dev->mmio + in ni6527_set_edge_detection()
294 writeb(rising & 0xff, in ni6527_set_edge_detection()
300 rising >>= 8; in ni6527_set_edge_detection()
312 unsigned int rising, falling, shift; in ni6527_intr_insn_config() local
319 rising = data[1]; in ni6527_intr_insn_config()
321 ni6527_set_edge_detection(dev, mask, rising, falling); in ni6527_intr_insn_config()
330 rising = 0; in ni6527_intr_insn_config()
338 rising = 0; in ni6527_intr_insn_config()
[all …]
|
| /linux-6.6.21/Documentation/ABI/testing/ |
| D | sysfs-bus-iio-timer-stm32 | 37 OC4REF rising or falling edges generate pulses.
39 OC6REF rising or falling edges generate pulses.
41 OC4REF or OC6REF rising edges generate pulses.
43 OC4REF rising or OC6REF falling edges generate
46 OC5REF or OC6REF rising edges generate pulses.
48 OC5REF rising or OC6REF falling edges generate
126 Counting is enabled on rising edge of the connected
143 rising edges.
|
| D | sysfs-bus-iio-adc-hi8435 | 27 If falling threshold results hysteresis to odd value then rising
36 this value then the threshold rising event is pushed.
47 If rising threshold results hysteresis to odd value then falling
|
| D | sysfs-bus-iio-light-lm3533-als | 7 in each direction (rising|falling) and a zone change occurs.
42 in_illuminance0_threshY_{falling,rising} thresholds.
|
| /linux-6.6.21/drivers/iio/cdc/ |
| D | ad7150.c | 190 int rising = (dir == IIO_EV_DIR_RISING); in ad7150_write_event_params() local
199 u16 value = chip->threshold[rising][chan]; in ad7150_write_event_params()
208 sens = chip->thresh_sensitivity[rising][chan]; in ad7150_write_event_params()
259 int rising = (dir == IIO_EV_DIR_RISING); in ad7150_write_event_config() local
283 if (rising) in ad7150_write_event_config()
332 int rising = (dir == IIO_EV_DIR_RISING); in ad7150_read_event_value() local
339 *val = chip->thresh_sensitivity[rising][chan->channel]; in ad7150_read_event_value()
342 *val = chip->threshold[rising][chan->channel]; in ad7150_read_event_value()
349 *val2 = chip->thresh_timeout[rising][chan->channel] * 10000; in ad7150_read_event_value()
365 int rising = (dir == IIO_EV_DIR_RISING); in ad7150_write_event_value() local
[all …]
|
| /linux-6.6.21/Documentation/devicetree/bindings/net/nfc/ |
| D | marvell,nci.yaml | 42 i2c-int-rising:
46 triggered on rising edge.
92 i2c-int-rising: false
104 i2c-int-rising: false
129 i2c-int-rising;
|
| /linux-6.6.21/drivers/iio/proximity/ |
| D | ping.c | 57 struct completion rising; member
82 complete(&data->rising); in ping_handle_irq()
106 reinit_completion(&data->rising); in ping_read()
136 ret = wait_for_completion_killable_timeout(&data->rising, HZ/50); in ping_read()
293 init_completion(&data->rising); in ping_probe()
|
| D | srf04.c | 64 struct completion rising; member
86 complete(&data->rising); in srf04_handle_irq()
113 reinit_completion(&data->rising); in srf04_read()
126 ret = wait_for_completion_killable_timeout(&data->rising, HZ/50); in srf04_read()
266 init_completion(&data->rising); in srf04_probe()
|
| /linux-6.6.21/drivers/gpio/ |
| D | gpio-xilinx.c | 509 DECLARE_BITMAP(rising, 64); in xgpio_irqhandler()
525 bitmap_complement(rising, chip->last_irq_read, 64); in xgpio_irqhandler()
526 bitmap_and(rising, rising, all, 64); in xgpio_irqhandler()
527 bitmap_and(rising, rising, chip->enable, 64); in xgpio_irqhandler()
528 bitmap_and(rising, rising, chip->rising_edge, 64); in xgpio_irqhandler()
536 bitmap_or(all, rising, falling, 64); in xgpio_irqhandler()
540 dev_dbg(gc->parent, "IRQ rising %*pb falling %*pb\n", 64, rising, 64, falling); in xgpio_irqhandler()
|
| D | gpio-mt7621.c | 36 u32 rising; member
121 mtk_gpio_w32(rg, GPIO_REG_REDGE, rise | (BIT(pin) & rg->rising)); in mediatek_gpio_irq_unmask()
160 if ((rg->rising | rg->falling | in mediatek_gpio_irq_type()
167 rg->rising &= ~mask; in mediatek_gpio_irq_type()
174 rg->rising |= mask; in mediatek_gpio_irq_type()
178 rg->rising |= mask; in mediatek_gpio_irq_type()
|
| D | gpio-sch.c | 177 int rising, falling; in sch_irq_type() local
181 rising = 1; in sch_irq_type()
185 rising = 0; in sch_irq_type()
189 rising = 1; in sch_irq_type()
198 sch_gpio_reg_set(sch, gpio_num, GTPE, rising); in sch_irq_type()
|
| D | gpio-hlwd.c | 77 u32 level, rising, falling; in hlwd_gpio_irqhandler() local
80 rising = level & emulated_pending; in hlwd_gpio_irqhandler()
91 rising &= hlwd->rising_edge; in hlwd_gpio_irqhandler()
95 pending |= rising | falling; in hlwd_gpio_irqhandler()
|
| /linux-6.6.21/Documentation/devicetree/bindings/display/panel/ |
| D | panel-timing.yaml | 170 Data driving on rising or falling edge.
172 sample data on rising edge.
173 Use 1 to drive pixel data on rising edge and
180 Drive sync on rising or sample sync on falling edge.
183 sample sync on rising edge of pixel clock.
184 Use 1 to drive sync on rising edge and
|
| /linux-6.6.21/Documentation/devicetree/bindings/soc/fsl/cpm_qe/ |
| D | fsl,cpm1-tsa.yaml | 99 Data is sent on falling edge of the clock (and received on the rising
101 rising edge (and received on the falling edge).
103 fsl,fsync-rising-edge:
106 Frame sync pulses are sampled with the rising edge of the channel
107 clock. If 'fsync-rising-edge' is not present, pulses are sampled with
193 fsl,fsync-rising-edge;
|
| /linux-6.6.21/Documentation/devicetree/bindings/gpio/ |
| D | cavium-octeon-gpio.txt | 21 1 - edge triggered on the rising edge.
37 * 2) Triggering (1 - edge rising
|
| D | gpio-stp-xway.yaml | 60 lantiq,rising:
62 Use rising instead of falling edge for the shift register.
|
| /linux-6.6.21/Documentation/devicetree/bindings/i2c/ |
| D | hisilicon,ascend910-i2c.yaml | 44 i2c-scl-rising-time-ns:
68 i2c-scl-rising-time-ns = <56>;
|
| /linux-6.6.21/arch/arm/boot/dts/st/ |
| D | stm32mp15xx-dhcom-picoitx.dtsi | 82 i2c-scl-rising-time-ns = <185>;
93 i2c-scl-rising-time-ns = <185>;
|
| D | stm32mp157a-stinger96.dtsi | 89 i2c-scl-rising-time-ns = <1000>;
99 i2c-scl-rising-time-ns = <185>;
232 interrupt-names = "onkey-falling", "onkey-rising";
|
| /linux-6.6.21/Documentation/leds/ |
| D | leds-mt6370-rgb.rst | 50 * Tr1: First rising time for 0% - 30% load.
51 * Tr2: Second rising time for 31% - 100% load.
|
| /linux-6.6.21/Documentation/devicetree/bindings/sound/ |
| D | cs35l34.txt | 44 - cirrus,tdm-rising-edge: Boolean property. If set, data is on the rising edge of
|
| D | cirrus,cs42l43.yaml | 140 Time in milliseconds a rising edge on the tip detect should be hardware
141 debounced for. Note the rising edge is considered after the invert.
170 Time in milliseconds a rising edge on the ring detect should be hardware
171 debounced for. Note the rising edge is considered after the invert.
|
| /linux-6.6.21/drivers/net/dsa/mv88e6xxx/ |
| D | ptp.c | 121 int rising) in mv88e6352_config_eventcap() argument
129 if (!rising) in mv88e6352_config_eventcap()
272 int rising = (rq->extts.flags & PTP_RISING_EDGE); in mv88e6352_ptp_enable_extts() local
307 err = mv88e6352_config_eventcap(chip, PTP_CLOCK_EXTTS, rising); in mv88e6352_ptp_enable_extts()
|
| /linux-6.6.21/Documentation/devicetree/bindings/iio/adc/ |
| D | st,stm32-dfsdm-adc.yaml | 120 - "SPI_R": SPI with data on rising edge (default)
122 - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
123 - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
134 - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
|
| /linux-6.6.21/Documentation/devicetree/bindings/net/ |
| D | qca,qca7000.txt | 17 type as rising edge
50 interrupts = <25 0x1>; /* Index: 25, rising edge */
|