/linux-6.6.21/drivers/net/ethernet/apm/xgene-v2/ |
D | mac.c | 21 u32 intf_ctrl, rgmii; in xge_mac_set_speed() local 26 rgmii = xge_rd_csr(pdata, RGMII_REG_0); in xge_mac_set_speed() 37 SET_REG_BIT(&rgmii, CFG_SPEED_125, 0); in xge_mac_set_speed() 44 SET_REG_BIT(&rgmii, CFG_SPEED_125, 0); in xge_mac_set_speed() 51 SET_REG_BIT(&rgmii, CFG_SPEED_125, 1); in xge_mac_set_speed() 60 xge_wr_csr(pdata, RGMII_REG_0, rgmii); in xge_mac_set_speed()
|
/linux-6.6.21/arch/powerpc/boot/dts/ |
D | eiger.dts | 278 RGMII0: emac-rgmii@ef600900 { 279 compatible = "ibm,rgmii-460sx", "ibm,rgmii"; 284 RGMII1: emac-rgmii@ef600920 { 285 compatible = "ibm,rgmii-460sx", "ibm,rgmii"; 320 phy-mode = "rgmii"; 322 rgmii-device = <&RGMII0>; 323 rgmii-channel = <0>; 350 phy-mode = "rgmii"; 352 rgmii-device = <&RGMII0>; 353 rgmii-channel = <1>; [all …]
|
D | klondike.dts | 131 RGMII0: emac-rgmii@400a2000 { 132 compatible = "ibm,rgmii"; 164 phy-mode = "rgmii"; 168 rgmii-device = <&RGMII0>; 169 rgmii-channel = <0>; 194 phy-mode = "rgmii"; 198 rgmii-device = <&RGMII0>; 199 rgmii-channel = <1>;
|
D | glacier.dts | 315 RGMII0: emac-rgmii@ef601500 { 316 compatible = "ibm,rgmii-460gt", "ibm,rgmii"; 321 RGMII1: emac-rgmii@ef601600 { 322 compatible = "ibm,rgmii-460gt", "ibm,rgmii"; 357 phy-mode = "rgmii"; 359 rgmii-device = <&RGMII0>; 360 rgmii-channel = <0>; 387 phy-mode = "rgmii"; 389 rgmii-device = <&RGMII0>; 390 rgmii-channel = <1>; [all …]
|
D | obs600.dts | 238 RGMII0: emac-rgmii@ef600b00 { 239 compatible = "ibm,rgmii-405ex", "ibm,rgmii"; 266 phy-mode = "rgmii"; 268 rgmii-device = <&RGMII0>; 269 rgmii-channel = <0>; 296 phy-mode = "rgmii"; 298 rgmii-device = <&RGMII0>; 299 rgmii-channel = <1>;
|
D | rainier.dts | 252 RGMII0: emac-rgmii@ef601000 { 253 compatible = "ibm,rgmii-440grx", "ibm,rgmii"; 277 phy-mode = "rgmii"; 281 rgmii-device = <&RGMII0>; 282 rgmii-channel = <0>; 306 phy-mode = "rgmii"; 310 rgmii-device = <&RGMII0>; 311 rgmii-channel = <1>;
|
D | sequoia.dts | 310 RGMII0: emac-rgmii@ef601000 { 311 compatible = "ibm,rgmii-440epx", "ibm,rgmii"; 335 phy-mode = "rgmii"; 339 rgmii-device = <&RGMII0>; 340 rgmii-channel = <0>; 364 phy-mode = "rgmii"; 368 rgmii-device = <&RGMII0>; 369 rgmii-channel = <1>;
|
D | makalu.dts | 204 RGMII0: emac-rgmii@ef600b00 { 205 compatible = "ibm,rgmii-405ex", "ibm,rgmii"; 232 phy-mode = "rgmii"; 234 rgmii-device = <&RGMII0>; 235 rgmii-channel = <0>; 262 phy-mode = "rgmii"; 264 rgmii-device = <&RGMII0>; 265 rgmii-channel = <1>;
|
/linux-6.6.21/Documentation/devicetree/bindings/net/dsa/ |
D | nxp,sja1105.yaml | 85 - rgmii 86 - rgmii-rxid 87 - rgmii-txid 88 - rgmii-id 154 phy-mode = "rgmii-id"; 162 phy-mode = "rgmii-id"; 170 phy-mode = "rgmii-id"; 178 phy-mode = "rgmii-id"; 186 phy-mode = "rgmii";
|
D | microchip,lan937x.yaml | 48 - rgmii 49 - rgmii-id 50 - rgmii-txid 51 - rgmii-rxid 124 phy-mode = "rgmii"; 138 phy-mode = "rgmii";
|
D | arrow,xrs700x.yaml | 54 phy-mode = "rgmii-id"; 60 phy-mode = "rgmii-id"; 65 phy-mode = "rgmii-id";
|
/linux-6.6.21/Documentation/devicetree/bindings/net/ |
D | adi,adin.yaml | 22 internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds. 29 internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds. 63 phy-mode = "rgmii-id";
|
D | qcom,ethqos.yaml | 33 - const: rgmii 56 - rgmii 85 reg-names = "stmmaceth", "rgmii"; 86 clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; 107 phy-mode = "rgmii";
|
D | motorcomm,yt8xxx.yaml | 24 internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds. 33 internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds. 57 drive strength of rx_clk rgmii pad. 74 drive strength of rx_data/rx_ctl rgmii pad. 120 phy-mode = "rgmii-id"; 139 phy-mode = "rgmii";
|
D | ibm,emac.txt | 45 Supported values are: "mii", "rmii", "smii", "rgmii", 47 For Axon on CAB, it is "rgmii" 55 - rgmii-device : 1 cell, required iff connected to an RGMII. phandle 57 For Axon: phandle of plb5/plb4/opb/rgmii 58 - rgmii-channel : 1 cell, required iff connected to an RGMII. Which 143 phy-mode = "rgmii"; 146 rgmii-device = <&RGMII0>; 147 rgmii-channel = <0>; 199 "ibm,rgmii-CHIP" where CHIP is the host ASIC (like 200 EMAC) and the second is "ibm,rgmii". [all …]
|
D | engleder,tsnep.yaml | 56 - rgmii 57 - rgmii-id 86 phy-mode = "rgmii"; 106 phy-mode = "rgmii";
|
D | xlnx,gmii-to-rgmii.yaml | 4 $id: http://devicetree.org/schemas/net/xlnx,gmii-to-rgmii.yaml# 24 const: xlnx,gmii-to-rgmii-1.0 51 compatible = "xlnx,gmii-to-rgmii-1.0";
|
D | ethernet-controller.yaml | 79 - rgmii 83 - rgmii-id 87 - rgmii-rxid 91 - rgmii-txid 270 - rgmii 271 - rgmii-rxid 272 - rgmii-txid 273 - rgmii-id
|
D | ti,icssg-prueth.yaml | 99 ti,syscon-rgmii-delay: 176 phy-mode = "rgmii-id"; 178 ti,syscon-rgmii-delay = <&scm_conf 0x4120>; 186 phy-mode = "rgmii-id"; 188 ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
|
/linux-6.6.21/arch/powerpc/boot/dts/fsl/ |
D | mvme7100.dts | 38 phy-connection-type = "rgmii-id"; 58 phy-connection-type = "rgmii-id"; 67 phy-connection-type = "rgmii-id"; 76 phy-connection-type = "rgmii-id";
|
/linux-6.6.21/arch/arm/boot/dts/nxp/ls/ |
D | ls1021a-tsn.dts | 62 phy-mode = "rgmii-id"; 70 phy-mode = "rgmii-id"; 78 phy-mode = "rgmii-id"; 86 phy-mode = "rgmii-id"; 93 phy-mode = "rgmii"; 123 phy-mode = "rgmii";
|
/linux-6.6.21/arch/arm64/boot/dts/xilinx/ |
D | zynqmp-zc1751-xm018-dc4.dts | 117 phy-mode = "rgmii-id"; 135 phy-mode = "rgmii-id"; 141 phy-mode = "rgmii-id"; 147 phy-mode = "rgmii-id";
|
/linux-6.6.21/Documentation/ABI/testing/ |
D | sysfs-class-net-phydev | 42 rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
|
/linux-6.6.21/arch/arm64/boot/dts/altera/ |
D | socfpga_stratix10_swvp.dts | 64 phy-mode = "rgmii"; 71 phy-mode = "rgmii"; 77 phy-mode = "rgmii";
|
/linux-6.6.21/Documentation/devicetree/bindings/pinctrl/ |
D | ralink,rt305x-pinctrl.yaml | 39 pcm gpio, pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, 59 enum: [i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite] 145 const: rgmii 149 enum: [rgmii]
|