1 /* SPDX-License-Identifier: GPL-2.0 2 * 3 * Copyright 2020-2022 HabanaLabs, Ltd. 4 * All Rights Reserved. 5 * 6 */ 7 8 #ifndef CPUCP_IF_H 9 #define CPUCP_IF_H 10 11 #include <linux/types.h> 12 #include <linux/if_ether.h> 13 14 #include "hl_boot_if.h" 15 16 #define NUM_HBM_PSEUDO_CH 2 17 #define NUM_HBM_CH_PER_DEV 8 18 #define CPUCP_PKT_HBM_ECC_INFO_WR_PAR_SHIFT 0 19 #define CPUCP_PKT_HBM_ECC_INFO_WR_PAR_MASK 0x00000001 20 #define CPUCP_PKT_HBM_ECC_INFO_RD_PAR_SHIFT 1 21 #define CPUCP_PKT_HBM_ECC_INFO_RD_PAR_MASK 0x00000002 22 #define CPUCP_PKT_HBM_ECC_INFO_CA_PAR_SHIFT 2 23 #define CPUCP_PKT_HBM_ECC_INFO_CA_PAR_MASK 0x00000004 24 #define CPUCP_PKT_HBM_ECC_INFO_DERR_SHIFT 3 25 #define CPUCP_PKT_HBM_ECC_INFO_DERR_MASK 0x00000008 26 #define CPUCP_PKT_HBM_ECC_INFO_SERR_SHIFT 4 27 #define CPUCP_PKT_HBM_ECC_INFO_SERR_MASK 0x00000010 28 #define CPUCP_PKT_HBM_ECC_INFO_TYPE_SHIFT 5 29 #define CPUCP_PKT_HBM_ECC_INFO_TYPE_MASK 0x00000020 30 #define CPUCP_PKT_HBM_ECC_INFO_HBM_CH_SHIFT 6 31 #define CPUCP_PKT_HBM_ECC_INFO_HBM_CH_MASK 0x000007C0 32 33 #define PLL_MAP_MAX_BITS 128 34 #define PLL_MAP_LEN (PLL_MAP_MAX_BITS / 8) 35 36 /* 37 * info of the pkt queue pointers in the first async occurrence 38 */ 39 struct cpucp_pkt_sync_err { 40 __le32 pi; 41 __le32 ci; 42 }; 43 44 struct hl_eq_hbm_ecc_data { 45 /* SERR counter */ 46 __le32 sec_cnt; 47 /* DERR counter */ 48 __le32 dec_cnt; 49 /* Supplemental Information according to the mask bits */ 50 __le32 hbm_ecc_info; 51 /* Address in hbm where the ecc happened */ 52 __le32 first_addr; 53 /* SERR continuous address counter */ 54 __le32 sec_cont_cnt; 55 __le32 pad; 56 }; 57 58 /* 59 * EVENT QUEUE 60 */ 61 62 struct hl_eq_header { 63 __le32 reserved; 64 __le32 ctl; 65 }; 66 67 struct hl_eq_ecc_data { 68 __le64 ecc_address; 69 __le64 ecc_syndrom; 70 __u8 memory_wrapper_idx; 71 __u8 is_critical; 72 __u8 pad[6]; 73 }; 74 75 enum hl_sm_sei_cause { 76 SM_SEI_SO_OVERFLOW, 77 SM_SEI_LBW_4B_UNALIGNED, 78 SM_SEI_AXI_RESPONSE_ERR 79 }; 80 81 struct hl_eq_sm_sei_data { 82 __le32 sei_log; 83 /* enum hl_sm_sei_cause */ 84 __u8 sei_cause; 85 __u8 pad[3]; 86 }; 87 88 enum hl_fw_alive_severity { 89 FW_ALIVE_SEVERITY_MINOR, 90 FW_ALIVE_SEVERITY_CRITICAL 91 }; 92 93 struct hl_eq_fw_alive { 94 __le64 uptime_seconds; 95 __le32 process_id; 96 __le32 thread_id; 97 /* enum hl_fw_alive_severity */ 98 __u8 severity; 99 __u8 pad[7]; 100 }; 101 102 struct hl_eq_intr_cause { 103 __le64 intr_cause_data; 104 }; 105 106 struct hl_eq_pcie_drain_ind_data { 107 struct hl_eq_intr_cause intr_cause; 108 __le64 drain_wr_addr_lbw; 109 __le64 drain_rd_addr_lbw; 110 __le64 drain_wr_addr_hbw; 111 __le64 drain_rd_addr_hbw; 112 }; 113 114 struct hl_eq_razwi_lbw_info_regs { 115 __le32 rr_aw_razwi_reg; 116 __le32 rr_aw_razwi_id_reg; 117 __le32 rr_ar_razwi_reg; 118 __le32 rr_ar_razwi_id_reg; 119 }; 120 121 struct hl_eq_razwi_hbw_info_regs { 122 __le32 rr_aw_razwi_hi_reg; 123 __le32 rr_aw_razwi_lo_reg; 124 __le32 rr_aw_razwi_id_reg; 125 __le32 rr_ar_razwi_hi_reg; 126 __le32 rr_ar_razwi_lo_reg; 127 __le32 rr_ar_razwi_id_reg; 128 }; 129 130 /* razwi_happened masks */ 131 #define RAZWI_HAPPENED_HBW 0x1 132 #define RAZWI_HAPPENED_LBW 0x2 133 #define RAZWI_HAPPENED_AW 0x4 134 #define RAZWI_HAPPENED_AR 0x8 135 136 struct hl_eq_razwi_info { 137 __le32 razwi_happened_mask; 138 union { 139 struct hl_eq_razwi_lbw_info_regs lbw; 140 struct hl_eq_razwi_hbw_info_regs hbw; 141 }; 142 __le32 pad; 143 }; 144 145 struct hl_eq_razwi_with_intr_cause { 146 struct hl_eq_razwi_info razwi_info; 147 struct hl_eq_intr_cause intr_cause; 148 }; 149 150 #define HBM_CA_ERR_CMD_LIFO_LEN 8 151 #define HBM_RD_ERR_DATA_LIFO_LEN 8 152 #define HBM_WR_PAR_CMD_LIFO_LEN 11 153 154 enum hl_hbm_sei_cause { 155 /* Command/address parity error event is split into 2 events due to 156 * size limitation: ODD suffix for odd HBM CK_t cycles and EVEN suffix 157 * for even HBM CK_t cycles 158 */ 159 HBM_SEI_CMD_PARITY_EVEN, 160 HBM_SEI_CMD_PARITY_ODD, 161 /* Read errors can be reflected as a combination of SERR/DERR/parity 162 * errors. Therefore, we define one event for all read error types. 163 * LKD will perform further proccessing. 164 */ 165 HBM_SEI_READ_ERR, 166 HBM_SEI_WRITE_DATA_PARITY_ERR, 167 HBM_SEI_CATTRIP, 168 HBM_SEI_MEM_BIST_FAIL, 169 HBM_SEI_DFI, 170 HBM_SEI_INV_TEMP_READ_OUT, 171 HBM_SEI_BIST_FAIL, 172 }; 173 174 /* Masks for parsing hl_hbm_sei_headr fields */ 175 #define HBM_ECC_SERR_CNTR_MASK 0xFF 176 #define HBM_ECC_DERR_CNTR_MASK 0xFF00 177 #define HBM_RD_PARITY_CNTR_MASK 0xFF0000 178 179 /* HBM index and MC index are known by the event_id */ 180 struct hl_hbm_sei_header { 181 union { 182 /* relevant only in case of HBM read error */ 183 struct { 184 __u8 ecc_serr_cnt; 185 __u8 ecc_derr_cnt; 186 __u8 read_par_cnt; 187 __u8 reserved; 188 }; 189 /* All other cases */ 190 __le32 cnt; 191 }; 192 __u8 sei_cause; /* enum hl_hbm_sei_cause */ 193 __u8 mc_channel; /* range: 0-3 */ 194 __u8 mc_pseudo_channel; /* range: 0-7 */ 195 __u8 is_critical; 196 }; 197 198 #define HBM_RD_ADDR_SID_SHIFT 0 199 #define HBM_RD_ADDR_SID_MASK 0x1 200 #define HBM_RD_ADDR_BG_SHIFT 1 201 #define HBM_RD_ADDR_BG_MASK 0x6 202 #define HBM_RD_ADDR_BA_SHIFT 3 203 #define HBM_RD_ADDR_BA_MASK 0x18 204 #define HBM_RD_ADDR_COL_SHIFT 5 205 #define HBM_RD_ADDR_COL_MASK 0x7E0 206 #define HBM_RD_ADDR_ROW_SHIFT 11 207 #define HBM_RD_ADDR_ROW_MASK 0x3FFF800 208 209 struct hbm_rd_addr { 210 union { 211 /* bit fields are only for FW use */ 212 struct { 213 u32 dbg_rd_err_addr_sid:1; 214 u32 dbg_rd_err_addr_bg:2; 215 u32 dbg_rd_err_addr_ba:2; 216 u32 dbg_rd_err_addr_col:6; 217 u32 dbg_rd_err_addr_row:15; 218 u32 reserved:6; 219 }; 220 __le32 rd_addr_val; 221 }; 222 }; 223 224 #define HBM_RD_ERR_BEAT_SHIFT 2 225 /* dbg_rd_err_misc fields: */ 226 /* Read parity is calculated per DW on every beat */ 227 #define HBM_RD_ERR_PAR_ERR_BEAT0_SHIFT 0 228 #define HBM_RD_ERR_PAR_ERR_BEAT0_MASK 0x3 229 #define HBM_RD_ERR_PAR_DATA_BEAT0_SHIFT 8 230 #define HBM_RD_ERR_PAR_DATA_BEAT0_MASK 0x300 231 /* ECC is calculated per PC on every beat */ 232 #define HBM_RD_ERR_SERR_BEAT0_SHIFT 16 233 #define HBM_RD_ERR_SERR_BEAT0_MASK 0x10000 234 #define HBM_RD_ERR_DERR_BEAT0_SHIFT 24 235 #define HBM_RD_ERR_DERR_BEAT0_MASK 0x100000 236 237 struct hl_eq_hbm_sei_read_err_intr_info { 238 /* DFI_RD_ERR_REP_ADDR */ 239 struct hbm_rd_addr dbg_rd_err_addr; 240 /* DFI_RD_ERR_REP_ERR */ 241 union { 242 struct { 243 /* bit fields are only for FW use */ 244 u32 dbg_rd_err_par:8; 245 u32 dbg_rd_err_par_data:8; 246 u32 dbg_rd_err_serr:4; 247 u32 dbg_rd_err_derr:4; 248 u32 reserved:8; 249 }; 250 __le32 dbg_rd_err_misc; 251 }; 252 /* DFI_RD_ERR_REP_DM */ 253 __le32 dbg_rd_err_dm; 254 /* DFI_RD_ERR_REP_SYNDROME */ 255 __le32 dbg_rd_err_syndrome; 256 /* DFI_RD_ERR_REP_DATA */ 257 __le32 dbg_rd_err_data[HBM_RD_ERR_DATA_LIFO_LEN]; 258 }; 259 260 struct hl_eq_hbm_sei_ca_par_intr_info { 261 /* 14 LSBs */ 262 __le16 dbg_row[HBM_CA_ERR_CMD_LIFO_LEN]; 263 /* 18 LSBs */ 264 __le32 dbg_col[HBM_CA_ERR_CMD_LIFO_LEN]; 265 }; 266 267 #define WR_PAR_LAST_CMD_COL_SHIFT 0 268 #define WR_PAR_LAST_CMD_COL_MASK 0x3F 269 #define WR_PAR_LAST_CMD_BG_SHIFT 6 270 #define WR_PAR_LAST_CMD_BG_MASK 0xC0 271 #define WR_PAR_LAST_CMD_BA_SHIFT 8 272 #define WR_PAR_LAST_CMD_BA_MASK 0x300 273 #define WR_PAR_LAST_CMD_SID_SHIFT 10 274 #define WR_PAR_LAST_CMD_SID_MASK 0x400 275 276 /* Row address isn't latched */ 277 struct hbm_sei_wr_cmd_address { 278 /* DFI_DERR_LAST_CMD */ 279 union { 280 struct { 281 /* bit fields are only for FW use */ 282 u32 col:6; 283 u32 bg:2; 284 u32 ba:2; 285 u32 sid:1; 286 u32 reserved:21; 287 }; 288 __le32 dbg_wr_cmd_addr; 289 }; 290 }; 291 292 struct hl_eq_hbm_sei_wr_par_intr_info { 293 /* entry 0: WR command address from the 1st cycle prior to the error 294 * entry 1: WR command address from the 2nd cycle prior to the error 295 * and so on... 296 */ 297 struct hbm_sei_wr_cmd_address dbg_last_wr_cmds[HBM_WR_PAR_CMD_LIFO_LEN]; 298 /* derr[0:1] - 1st HBM cycle DERR output 299 * derr[2:3] - 2nd HBM cycle DERR output 300 */ 301 __u8 dbg_derr; 302 /* extend to reach 8B */ 303 __u8 pad[3]; 304 }; 305 306 /* 307 * this struct represents the following sei causes: 308 * command parity, ECC double error, ECC single error, dfi error, cattrip, 309 * temperature read-out, read parity error and write parity error. 310 * some only use the header while some have extra data. 311 */ 312 struct hl_eq_hbm_sei_data { 313 struct hl_hbm_sei_header hdr; 314 union { 315 struct hl_eq_hbm_sei_ca_par_intr_info ca_parity_even_info; 316 struct hl_eq_hbm_sei_ca_par_intr_info ca_parity_odd_info; 317 struct hl_eq_hbm_sei_read_err_intr_info read_err_info; 318 struct hl_eq_hbm_sei_wr_par_intr_info wr_parity_info; 319 }; 320 }; 321 322 /* Engine/farm arc interrupt type */ 323 enum hl_engine_arc_interrupt_type { 324 /* Qman/farm ARC DCCM QUEUE FULL interrupt type */ 325 ENGINE_ARC_DCCM_QUEUE_FULL_IRQ = 1 326 }; 327 328 /* Data structure specifies details of payload of DCCM QUEUE FULL interrupt */ 329 struct hl_engine_arc_dccm_queue_full_irq { 330 /* Queue index value which caused DCCM QUEUE FULL */ 331 __le32 queue_index; 332 __le32 pad; 333 }; 334 335 /* Data structure specifies details of QM/FARM ARC interrupt */ 336 struct hl_eq_engine_arc_intr_data { 337 /* ARC engine id e.g. DCORE0_TPC0_QM_ARC, DCORE0_TCP1_QM_ARC */ 338 __le32 engine_id; 339 __le32 intr_type; /* enum hl_engine_arc_interrupt_type */ 340 /* More info related to the interrupt e.g. queue index 341 * incase of DCCM_QUEUE_FULL interrupt. 342 */ 343 __le64 payload; 344 __le64 pad[5]; 345 }; 346 347 #define ADDR_DEC_ADDRESS_COUNT_MAX 4 348 349 /* Data structure specifies details of ADDR_DEC interrupt */ 350 struct hl_eq_addr_dec_intr_data { 351 struct hl_eq_intr_cause intr_cause; 352 __le64 addr[ADDR_DEC_ADDRESS_COUNT_MAX]; 353 __u8 addr_cnt; 354 __u8 pad[7]; 355 }; 356 357 struct hl_eq_entry { 358 struct hl_eq_header hdr; 359 union { 360 __le64 data_placeholder; 361 struct hl_eq_ecc_data ecc_data; 362 struct hl_eq_hbm_ecc_data hbm_ecc_data; /* Obsolete */ 363 struct hl_eq_sm_sei_data sm_sei_data; 364 struct cpucp_pkt_sync_err pkt_sync_err; 365 struct hl_eq_fw_alive fw_alive; 366 struct hl_eq_intr_cause intr_cause; 367 struct hl_eq_pcie_drain_ind_data pcie_drain_ind_data; 368 struct hl_eq_razwi_info razwi_info; 369 struct hl_eq_razwi_with_intr_cause razwi_with_intr_cause; 370 struct hl_eq_hbm_sei_data sei_data; /* Gaudi2 HBM */ 371 struct hl_eq_engine_arc_intr_data arc_data; 372 struct hl_eq_addr_dec_intr_data addr_dec; 373 __le64 data[7]; 374 }; 375 }; 376 377 #define HL_EQ_ENTRY_SIZE sizeof(struct hl_eq_entry) 378 379 #define EQ_CTL_READY_SHIFT 31 380 #define EQ_CTL_READY_MASK 0x80000000 381 382 #define EQ_CTL_EVENT_TYPE_SHIFT 16 383 #define EQ_CTL_EVENT_TYPE_MASK 0x0FFF0000 384 385 #define EQ_CTL_INDEX_SHIFT 0 386 #define EQ_CTL_INDEX_MASK 0x0000FFFF 387 388 enum pq_init_status { 389 PQ_INIT_STATUS_NA = 0, 390 PQ_INIT_STATUS_READY_FOR_CP, 391 PQ_INIT_STATUS_READY_FOR_HOST, 392 PQ_INIT_STATUS_READY_FOR_CP_SINGLE_MSI, 393 PQ_INIT_STATUS_LEN_NOT_POWER_OF_TWO_ERR, 394 PQ_INIT_STATUS_ILLEGAL_Q_ADDR_ERR 395 }; 396 397 /* 398 * CpuCP Primary Queue Packets 399 * 400 * During normal operation, the host's kernel driver needs to send various 401 * messages to CpuCP, usually either to SET some value into a H/W periphery or 402 * to GET the current value of some H/W periphery. For example, SET the 403 * frequency of MME/TPC and GET the value of the thermal sensor. 404 * 405 * These messages can be initiated either by the User application or by the 406 * host's driver itself, e.g. power management code. In either case, the 407 * communication from the host's driver to CpuCP will *always* be in 408 * synchronous mode, meaning that the host will send a single message and poll 409 * until the message was acknowledged and the results are ready (if results are 410 * needed). 411 * 412 * This means that only a single message can be sent at a time and the host's 413 * driver must wait for its result before sending the next message. Having said 414 * that, because these are control messages which are sent in a relatively low 415 * frequency, this limitation seems acceptable. It's important to note that 416 * in case of multiple devices, messages to different devices *can* be sent 417 * at the same time. 418 * 419 * The message, inputs/outputs (if relevant) and fence object will be located 420 * on the device DDR at an address that will be determined by the host's driver. 421 * During device initialization phase, the host will pass to CpuCP that address. 422 * Most of the message types will contain inputs/outputs inside the message 423 * itself. The common part of each message will contain the opcode of the 424 * message (its type) and a field representing a fence object. 425 * 426 * When the host's driver wishes to send a message to CPU CP, it will write the 427 * message contents to the device DDR, clear the fence object and then write to 428 * the PSOC_ARC1_AUX_SW_INTR, to issue interrupt 121 to ARC Management CPU. 429 * 430 * Upon receiving the interrupt (#121), CpuCP will read the message from the 431 * DDR. In case the message is a SET operation, CpuCP will first perform the 432 * operation and then write to the fence object on the device DDR. In case the 433 * message is a GET operation, CpuCP will first fill the results section on the 434 * device DDR and then write to the fence object. If an error occurred, CpuCP 435 * will fill the rc field with the right error code. 436 * 437 * In the meantime, the host's driver will poll on the fence object. Once the 438 * host sees that the fence object is signaled, it will read the results from 439 * the device DDR (if relevant) and resume the code execution in the host's 440 * driver. 441 * 442 * To use QMAN packets, the opcode must be the QMAN opcode, shifted by 8 443 * so the value being put by the host's driver matches the value read by CpuCP 444 * 445 * Non-QMAN packets should be limited to values 1 through (2^8 - 1) 446 * 447 * Detailed description: 448 * 449 * CPUCP_PACKET_DISABLE_PCI_ACCESS - 450 * After receiving this packet the embedded CPU must NOT issue PCI 451 * transactions (read/write) towards the Host CPU. This also include 452 * sending MSI-X interrupts. 453 * This packet is usually sent before the device is moved to D3Hot state. 454 * 455 * CPUCP_PACKET_ENABLE_PCI_ACCESS - 456 * After receiving this packet the embedded CPU is allowed to issue PCI 457 * transactions towards the Host CPU, including sending MSI-X interrupts. 458 * This packet is usually send after the device is moved to D0 state. 459 * 460 * CPUCP_PACKET_TEMPERATURE_GET - 461 * Fetch the current temperature / Max / Max Hyst / Critical / 462 * Critical Hyst of a specified thermal sensor. The packet's 463 * arguments specify the desired sensor and the field to get. 464 * 465 * CPUCP_PACKET_VOLTAGE_GET - 466 * Fetch the voltage / Max / Min of a specified sensor. The packet's 467 * arguments specify the sensor and type. 468 * 469 * CPUCP_PACKET_CURRENT_GET - 470 * Fetch the current / Max / Min of a specified sensor. The packet's 471 * arguments specify the sensor and type. 472 * 473 * CPUCP_PACKET_FAN_SPEED_GET - 474 * Fetch the speed / Max / Min of a specified fan. The packet's 475 * arguments specify the sensor and type. 476 * 477 * CPUCP_PACKET_PWM_GET - 478 * Fetch the pwm value / mode of a specified pwm. The packet's 479 * arguments specify the sensor and type. 480 * 481 * CPUCP_PACKET_PWM_SET - 482 * Set the pwm value / mode of a specified pwm. The packet's 483 * arguments specify the sensor, type and value. 484 * 485 * CPUCP_PACKET_FREQUENCY_SET - 486 * Set the frequency of a specified PLL. The packet's arguments specify 487 * the PLL and the desired frequency. The actual frequency in the device 488 * might differ from the requested frequency. 489 * 490 * CPUCP_PACKET_FREQUENCY_GET - 491 * Fetch the frequency of a specified PLL. The packet's arguments specify 492 * the PLL. 493 * 494 * CPUCP_PACKET_LED_SET - 495 * Set the state of a specified led. The packet's arguments 496 * specify the led and the desired state. 497 * 498 * CPUCP_PACKET_I2C_WR - 499 * Write 32-bit value to I2C device. The packet's arguments specify the 500 * I2C bus, address and value. 501 * 502 * CPUCP_PACKET_I2C_RD - 503 * Read 32-bit value from I2C device. The packet's arguments specify the 504 * I2C bus and address. 505 * 506 * CPUCP_PACKET_INFO_GET - 507 * Fetch information from the device as specified in the packet's 508 * structure. The host's driver passes the max size it allows the CpuCP to 509 * write to the structure, to prevent data corruption in case of 510 * mismatched driver/FW versions. 511 * 512 * CPUCP_PACKET_FLASH_PROGRAM_REMOVED - this packet was removed 513 * 514 * CPUCP_PACKET_UNMASK_RAZWI_IRQ - 515 * Unmask the given IRQ. The IRQ number is specified in the value field. 516 * The packet is sent after receiving an interrupt and printing its 517 * relevant information. 518 * 519 * CPUCP_PACKET_UNMASK_RAZWI_IRQ_ARRAY - 520 * Unmask the given IRQs. The IRQs numbers are specified in an array right 521 * after the cpucp_packet structure, where its first element is the array 522 * length. The packet is sent after a soft reset was done in order to 523 * handle any interrupts that were sent during the reset process. 524 * 525 * CPUCP_PACKET_TEST - 526 * Test packet for CpuCP connectivity. The CPU will put the fence value 527 * in the result field. 528 * 529 * CPUCP_PACKET_FREQUENCY_CURR_GET - 530 * Fetch the current frequency of a specified PLL. The packet's arguments 531 * specify the PLL. 532 * 533 * CPUCP_PACKET_MAX_POWER_GET - 534 * Fetch the maximal power of the device. 535 * 536 * CPUCP_PACKET_MAX_POWER_SET - 537 * Set the maximal power of the device. The packet's arguments specify 538 * the power. 539 * 540 * CPUCP_PACKET_EEPROM_DATA_GET - 541 * Get EEPROM data from the CpuCP kernel. The buffer is specified in the 542 * addr field. The CPU will put the returned data size in the result 543 * field. In addition, the host's driver passes the max size it allows the 544 * CpuCP to write to the structure, to prevent data corruption in case of 545 * mismatched driver/FW versions. 546 * 547 * CPUCP_PACKET_NIC_INFO_GET - 548 * Fetch information from the device regarding the NIC. the host's driver 549 * passes the max size it allows the CpuCP to write to the structure, to 550 * prevent data corruption in case of mismatched driver/FW versions. 551 * 552 * CPUCP_PACKET_TEMPERATURE_SET - 553 * Set the value of the offset property of a specified thermal sensor. 554 * The packet's arguments specify the desired sensor and the field to 555 * set. 556 * 557 * CPUCP_PACKET_VOLTAGE_SET - 558 * Trigger the reset_history property of a specified voltage sensor. 559 * The packet's arguments specify the desired sensor and the field to 560 * set. 561 * 562 * CPUCP_PACKET_CURRENT_SET - 563 * Trigger the reset_history property of a specified current sensor. 564 * The packet's arguments specify the desired sensor and the field to 565 * set. 566 * 567 * CPUCP_PACKET_PCIE_THROUGHPUT_GET - 568 * Get throughput of PCIe. 569 * The packet's arguments specify the transaction direction (TX/RX). 570 * The window measurement is 10[msec], and the return value is in KB/sec. 571 * 572 * CPUCP_PACKET_PCIE_REPLAY_CNT_GET 573 * Replay count measures number of "replay" events, which is basicly 574 * number of retries done by PCIe. 575 * 576 * CPUCP_PACKET_TOTAL_ENERGY_GET - 577 * Total Energy is measurement of energy from the time FW Linux 578 * is loaded. It is calculated by multiplying the average power 579 * by time (passed from armcp start). The units are in MilliJouls. 580 * 581 * CPUCP_PACKET_PLL_INFO_GET - 582 * Fetch frequencies of PLL from the required PLL IP. 583 * The packet's arguments specify the device PLL type 584 * Pll type is the PLL from device pll_index enum. 585 * The result is composed of 4 outputs, each is 16-bit 586 * frequency in MHz. 587 * 588 * CPUCP_PACKET_POWER_GET - 589 * Fetch the present power consumption of the device (Current * Voltage). 590 * 591 * CPUCP_PACKET_NIC_PFC_SET - 592 * Enable/Disable the NIC PFC feature. The packet's arguments specify the 593 * NIC port, relevant lanes to configure and one bit indication for 594 * enable/disable. 595 * 596 * CPUCP_PACKET_NIC_FAULT_GET - 597 * Fetch the current indication for local/remote faults from the NIC MAC. 598 * The result is 32-bit value of the relevant register. 599 * 600 * CPUCP_PACKET_NIC_LPBK_SET - 601 * Enable/Disable the MAC loopback feature. The packet's arguments specify 602 * the NIC port, relevant lanes to configure and one bit indication for 603 * enable/disable. 604 * 605 * CPUCP_PACKET_NIC_MAC_INIT - 606 * Configure the NIC MAC channels. The packet's arguments specify the 607 * NIC port and the speed. 608 * 609 * CPUCP_PACKET_MSI_INFO_SET - 610 * set the index number for each supported msi type going from 611 * host to device 612 * 613 * CPUCP_PACKET_NIC_XPCS91_REGS_GET - 614 * Fetch the un/correctable counters values from the NIC MAC. 615 * 616 * CPUCP_PACKET_NIC_STAT_REGS_GET - 617 * Fetch various NIC MAC counters from the NIC STAT. 618 * 619 * CPUCP_PACKET_NIC_STAT_REGS_CLR - 620 * Clear the various NIC MAC counters in the NIC STAT. 621 * 622 * CPUCP_PACKET_NIC_STAT_REGS_ALL_GET - 623 * Fetch all NIC MAC counters from the NIC STAT. 624 * 625 * CPUCP_PACKET_IS_IDLE_CHECK - 626 * Check if the device is IDLE in regard to the DMA/compute engines 627 * and QMANs. The f/w will return a bitmask where each bit represents 628 * a different engine or QMAN according to enum cpucp_idle_mask. 629 * The bit will be 1 if the engine is NOT idle. 630 * 631 * CPUCP_PACKET_HBM_REPLACED_ROWS_INFO_GET - 632 * Fetch all HBM replaced-rows and prending to be replaced rows data. 633 * 634 * CPUCP_PACKET_HBM_PENDING_ROWS_STATUS - 635 * Fetch status of HBM rows pending replacement and need a reboot to 636 * be replaced. 637 * 638 * CPUCP_PACKET_POWER_SET - 639 * Resets power history of device to 0 640 * 641 * CPUCP_PACKET_ENGINE_CORE_ASID_SET - 642 * Packet to perform engine core ASID configuration 643 * 644 * CPUCP_PACKET_SEC_ATTEST_GET - 645 * Get the attestaion data that is collected during various stages of the 646 * boot sequence. the attestation data is also hashed with some unique 647 * number (nonce) provided by the host to prevent replay attacks. 648 * public key and certificate also provided as part of the FW response. 649 * 650 * CPUCP_PACKET_MONITOR_DUMP_GET - 651 * Get monitors registers dump from the CpuCP kernel. 652 * The CPU will put the registers dump in the a buffer allocated by the driver 653 * which address is passed via the CpuCp packet. In addition, the host's driver 654 * passes the max size it allows the CpuCP to write to the structure, to prevent 655 * data corruption in case of mismatched driver/FW versions. 656 * Obsolete. 657 * 658 * CPUCP_PACKET_GENERIC_PASSTHROUGH - 659 * Generic opcode for all firmware info that is only passed to host 660 * through the LKD, without getting parsed there. 661 * 662 * CPUCP_PACKET_ACTIVE_STATUS_SET - 663 * LKD sends FW indication whether device is free or in use, this indication is reported 664 * also to the BMC. 665 * 666 * CPUCP_PACKET_REGISTER_INTERRUPTS - 667 * Packet to register interrupts indicating LKD is ready to receive events from FW. 668 * 669 * CPUCP_PACKET_SOFT_RESET - 670 * Packet to perform soft-reset. 671 */ 672 673 enum cpucp_packet_id { 674 CPUCP_PACKET_DISABLE_PCI_ACCESS = 1, /* internal */ 675 CPUCP_PACKET_ENABLE_PCI_ACCESS, /* internal */ 676 CPUCP_PACKET_TEMPERATURE_GET, /* sysfs */ 677 CPUCP_PACKET_VOLTAGE_GET, /* sysfs */ 678 CPUCP_PACKET_CURRENT_GET, /* sysfs */ 679 CPUCP_PACKET_FAN_SPEED_GET, /* sysfs */ 680 CPUCP_PACKET_PWM_GET, /* sysfs */ 681 CPUCP_PACKET_PWM_SET, /* sysfs */ 682 CPUCP_PACKET_FREQUENCY_SET, /* sysfs */ 683 CPUCP_PACKET_FREQUENCY_GET, /* sysfs */ 684 CPUCP_PACKET_LED_SET, /* debugfs */ 685 CPUCP_PACKET_I2C_WR, /* debugfs */ 686 CPUCP_PACKET_I2C_RD, /* debugfs */ 687 CPUCP_PACKET_INFO_GET, /* IOCTL */ 688 CPUCP_PACKET_FLASH_PROGRAM_REMOVED, 689 CPUCP_PACKET_UNMASK_RAZWI_IRQ, /* internal */ 690 CPUCP_PACKET_UNMASK_RAZWI_IRQ_ARRAY, /* internal */ 691 CPUCP_PACKET_TEST, /* internal */ 692 CPUCP_PACKET_FREQUENCY_CURR_GET, /* sysfs */ 693 CPUCP_PACKET_MAX_POWER_GET, /* sysfs */ 694 CPUCP_PACKET_MAX_POWER_SET, /* sysfs */ 695 CPUCP_PACKET_EEPROM_DATA_GET, /* sysfs */ 696 CPUCP_PACKET_NIC_INFO_GET, /* internal */ 697 CPUCP_PACKET_TEMPERATURE_SET, /* sysfs */ 698 CPUCP_PACKET_VOLTAGE_SET, /* sysfs */ 699 CPUCP_PACKET_CURRENT_SET, /* sysfs */ 700 CPUCP_PACKET_PCIE_THROUGHPUT_GET, /* internal */ 701 CPUCP_PACKET_PCIE_REPLAY_CNT_GET, /* internal */ 702 CPUCP_PACKET_TOTAL_ENERGY_GET, /* internal */ 703 CPUCP_PACKET_PLL_INFO_GET, /* internal */ 704 CPUCP_PACKET_NIC_STATUS, /* internal */ 705 CPUCP_PACKET_POWER_GET, /* internal */ 706 CPUCP_PACKET_NIC_PFC_SET, /* internal */ 707 CPUCP_PACKET_NIC_FAULT_GET, /* internal */ 708 CPUCP_PACKET_NIC_LPBK_SET, /* internal */ 709 CPUCP_PACKET_NIC_MAC_CFG, /* internal */ 710 CPUCP_PACKET_MSI_INFO_SET, /* internal */ 711 CPUCP_PACKET_NIC_XPCS91_REGS_GET, /* internal */ 712 CPUCP_PACKET_NIC_STAT_REGS_GET, /* internal */ 713 CPUCP_PACKET_NIC_STAT_REGS_CLR, /* internal */ 714 CPUCP_PACKET_NIC_STAT_REGS_ALL_GET, /* internal */ 715 CPUCP_PACKET_IS_IDLE_CHECK, /* internal */ 716 CPUCP_PACKET_HBM_REPLACED_ROWS_INFO_GET,/* internal */ 717 CPUCP_PACKET_HBM_PENDING_ROWS_STATUS, /* internal */ 718 CPUCP_PACKET_POWER_SET, /* internal */ 719 CPUCP_PACKET_RESERVED, /* not used */ 720 CPUCP_PACKET_ENGINE_CORE_ASID_SET, /* internal */ 721 CPUCP_PACKET_RESERVED2, /* not used */ 722 CPUCP_PACKET_SEC_ATTEST_GET, /* internal */ 723 CPUCP_PACKET_RESERVED3, /* not used */ 724 CPUCP_PACKET_RESERVED4, /* not used */ 725 CPUCP_PACKET_MONITOR_DUMP_GET, /* debugfs */ 726 CPUCP_PACKET_RESERVED5, /* not used */ 727 CPUCP_PACKET_RESERVED6, /* not used */ 728 CPUCP_PACKET_RESERVED7, /* not used */ 729 CPUCP_PACKET_GENERIC_PASSTHROUGH, /* IOCTL */ 730 CPUCP_PACKET_RESERVED8, /* not used */ 731 CPUCP_PACKET_ACTIVE_STATUS_SET, /* internal */ 732 CPUCP_PACKET_RESERVED9, /* not used */ 733 CPUCP_PACKET_RESERVED10, /* not used */ 734 CPUCP_PACKET_RESERVED11, /* not used */ 735 CPUCP_PACKET_RESERVED12, /* internal */ 736 CPUCP_PACKET_REGISTER_INTERRUPTS, /* internal */ 737 CPUCP_PACKET_SOFT_RESET, /* internal */ 738 CPUCP_PACKET_ID_MAX /* must be last */ 739 }; 740 741 #define CPUCP_PACKET_FENCE_VAL 0xFE8CE7A5 742 743 #define CPUCP_PKT_CTL_RC_SHIFT 12 744 #define CPUCP_PKT_CTL_RC_MASK 0x0000F000 745 746 #define CPUCP_PKT_CTL_OPCODE_SHIFT 16 747 #define CPUCP_PKT_CTL_OPCODE_MASK 0x1FFF0000 748 749 #define CPUCP_PKT_RES_PLL_OUT0_SHIFT 0 750 #define CPUCP_PKT_RES_PLL_OUT0_MASK 0x000000000000FFFFull 751 #define CPUCP_PKT_RES_PLL_OUT1_SHIFT 16 752 #define CPUCP_PKT_RES_PLL_OUT1_MASK 0x00000000FFFF0000ull 753 #define CPUCP_PKT_RES_PLL_OUT2_SHIFT 32 754 #define CPUCP_PKT_RES_PLL_OUT2_MASK 0x0000FFFF00000000ull 755 #define CPUCP_PKT_RES_PLL_OUT3_SHIFT 48 756 #define CPUCP_PKT_RES_PLL_OUT3_MASK 0xFFFF000000000000ull 757 758 #define CPUCP_PKT_RES_EEPROM_OUT0_SHIFT 0 759 #define CPUCP_PKT_RES_EEPROM_OUT0_MASK 0x000000000000FFFFull 760 #define CPUCP_PKT_RES_EEPROM_OUT1_SHIFT 16 761 #define CPUCP_PKT_RES_EEPROM_OUT1_MASK 0x0000000000FF0000ull 762 763 #define CPUCP_PKT_VAL_PFC_IN1_SHIFT 0 764 #define CPUCP_PKT_VAL_PFC_IN1_MASK 0x0000000000000001ull 765 #define CPUCP_PKT_VAL_PFC_IN2_SHIFT 1 766 #define CPUCP_PKT_VAL_PFC_IN2_MASK 0x000000000000001Eull 767 768 #define CPUCP_PKT_VAL_LPBK_IN1_SHIFT 0 769 #define CPUCP_PKT_VAL_LPBK_IN1_MASK 0x0000000000000001ull 770 #define CPUCP_PKT_VAL_LPBK_IN2_SHIFT 1 771 #define CPUCP_PKT_VAL_LPBK_IN2_MASK 0x000000000000001Eull 772 773 #define CPUCP_PKT_VAL_MAC_CNT_IN1_SHIFT 0 774 #define CPUCP_PKT_VAL_MAC_CNT_IN1_MASK 0x0000000000000001ull 775 #define CPUCP_PKT_VAL_MAC_CNT_IN2_SHIFT 1 776 #define CPUCP_PKT_VAL_MAC_CNT_IN2_MASK 0x00000000FFFFFFFEull 777 778 /* heartbeat status bits */ 779 #define CPUCP_PKT_HB_STATUS_EQ_FAULT_SHIFT 0 780 #define CPUCP_PKT_HB_STATUS_EQ_FAULT_MASK 0x00000001 781 782 struct cpucp_packet { 783 union { 784 __le64 value; /* For SET packets */ 785 __le64 result; /* For GET packets */ 786 __le64 addr; /* For PQ */ 787 }; 788 789 __le32 ctl; 790 791 __le32 fence; /* Signal to host that message is completed */ 792 793 union { 794 struct {/* For temperature/current/voltage/fan/pwm get/set */ 795 __le16 sensor_index; 796 __le16 type; 797 }; 798 799 struct { /* For I2C read/write */ 800 __u8 i2c_bus; 801 __u8 i2c_addr; 802 __u8 i2c_reg; 803 /* 804 * In legacy implemetations, i2c_len was not present, 805 * was unused and just added as pad. 806 * So if i2c_len is 0, it is treated as legacy 807 * and r/w 1 Byte, else if i2c_len is specified, 808 * its treated as new multibyte r/w support. 809 */ 810 __u8 i2c_len; 811 }; 812 813 struct {/* For PLL info fetch */ 814 __le16 pll_type; 815 /* TODO pll_reg is kept temporary before removal */ 816 __le16 pll_reg; 817 }; 818 819 /* For any general request */ 820 __le32 index; 821 822 /* For frequency get/set */ 823 __le32 pll_index; 824 825 /* For led set */ 826 __le32 led_index; 827 828 /* For get CpuCP info/EEPROM data/NIC info */ 829 __le32 data_max_size; 830 831 /* 832 * For any general status bitmask. Shall be used whenever the 833 * result cannot be used to hold general purpose data. 834 */ 835 __le32 status_mask; 836 837 /* random, used once number, for security packets */ 838 __le32 nonce; 839 }; 840 841 union { 842 /* For NIC requests */ 843 __le32 port_index; 844 845 /* For Generic packet sub index */ 846 __le32 pkt_subidx; 847 }; 848 }; 849 850 struct cpucp_unmask_irq_arr_packet { 851 struct cpucp_packet cpucp_pkt; 852 __le32 length; 853 __le32 irqs[]; 854 }; 855 856 struct cpucp_nic_status_packet { 857 struct cpucp_packet cpucp_pkt; 858 __le32 length; 859 __le32 data[]; 860 }; 861 862 struct cpucp_array_data_packet { 863 struct cpucp_packet cpucp_pkt; 864 __le32 length; 865 __le32 data[]; 866 }; 867 868 enum cpucp_led_index { 869 CPUCP_LED0_INDEX = 0, 870 CPUCP_LED1_INDEX, 871 CPUCP_LED2_INDEX, 872 CPUCP_LED_MAX_INDEX = CPUCP_LED2_INDEX 873 }; 874 875 /* 876 * enum cpucp_packet_rc - Error return code 877 * @cpucp_packet_success -> in case of success. 878 * @cpucp_packet_invalid -> this is to support first generation platforms. 879 * @cpucp_packet_fault -> in case of processing error like failing to 880 * get device binding or semaphore etc. 881 * @cpucp_packet_invalid_pkt -> when cpucp packet is un-supported. 882 * @cpucp_packet_invalid_params -> when checking parameter like length of buffer 883 * or attribute value etc. 884 * @cpucp_packet_rc_max -> It indicates size of enum so should be at last. 885 */ 886 enum cpucp_packet_rc { 887 cpucp_packet_success, 888 cpucp_packet_invalid, 889 cpucp_packet_fault, 890 cpucp_packet_invalid_pkt, 891 cpucp_packet_invalid_params, 892 cpucp_packet_rc_max 893 }; 894 895 /* 896 * cpucp_temp_type should adhere to hwmon_temp_attributes 897 * defined in Linux kernel hwmon.h file 898 */ 899 enum cpucp_temp_type { 900 cpucp_temp_input, 901 cpucp_temp_min = 4, 902 cpucp_temp_min_hyst, 903 cpucp_temp_max = 6, 904 cpucp_temp_max_hyst, 905 cpucp_temp_crit, 906 cpucp_temp_crit_hyst, 907 cpucp_temp_offset = 19, 908 cpucp_temp_lowest = 21, 909 cpucp_temp_highest = 22, 910 cpucp_temp_reset_history = 23, 911 cpucp_temp_warn = 24, 912 cpucp_temp_max_crit = 25, 913 cpucp_temp_max_warn = 26, 914 }; 915 916 enum cpucp_in_attributes { 917 cpucp_in_input, 918 cpucp_in_min, 919 cpucp_in_max, 920 cpucp_in_lowest = 6, 921 cpucp_in_highest = 7, 922 cpucp_in_reset_history, 923 cpucp_in_intr_alarm_a, 924 cpucp_in_intr_alarm_b, 925 }; 926 927 enum cpucp_curr_attributes { 928 cpucp_curr_input, 929 cpucp_curr_min, 930 cpucp_curr_max, 931 cpucp_curr_lowest = 6, 932 cpucp_curr_highest = 7, 933 cpucp_curr_reset_history 934 }; 935 936 enum cpucp_fan_attributes { 937 cpucp_fan_input, 938 cpucp_fan_min = 2, 939 cpucp_fan_max 940 }; 941 942 enum cpucp_pwm_attributes { 943 cpucp_pwm_input, 944 cpucp_pwm_enable 945 }; 946 947 enum cpucp_pcie_throughput_attributes { 948 cpucp_pcie_throughput_tx, 949 cpucp_pcie_throughput_rx 950 }; 951 952 /* TODO temporary kept before removal */ 953 enum cpucp_pll_reg_attributes { 954 cpucp_pll_nr_reg, 955 cpucp_pll_nf_reg, 956 cpucp_pll_od_reg, 957 cpucp_pll_div_factor_reg, 958 cpucp_pll_div_sel_reg 959 }; 960 961 /* TODO temporary kept before removal */ 962 enum cpucp_pll_type_attributes { 963 cpucp_pll_cpu, 964 cpucp_pll_pci, 965 }; 966 967 /* 968 * cpucp_power_type aligns with hwmon_power_attributes 969 * defined in Linux kernel hwmon.h file 970 */ 971 enum cpucp_power_type { 972 CPUCP_POWER_INPUT = 8, 973 CPUCP_POWER_INPUT_HIGHEST = 9, 974 CPUCP_POWER_RESET_INPUT_HISTORY = 11 975 }; 976 977 /* 978 * MSI type enumeration table for all ASICs and future SW versions. 979 * For future ASIC-LKD compatibility, we can only add new enumerations. 980 * at the end of the table (before CPUCP_NUM_OF_MSI_TYPES). 981 * Changing the order of entries or removing entries is not allowed. 982 */ 983 enum cpucp_msi_type { 984 CPUCP_EVENT_QUEUE_MSI_TYPE, 985 CPUCP_NIC_PORT1_MSI_TYPE, 986 CPUCP_NIC_PORT3_MSI_TYPE, 987 CPUCP_NIC_PORT5_MSI_TYPE, 988 CPUCP_NIC_PORT7_MSI_TYPE, 989 CPUCP_NIC_PORT9_MSI_TYPE, 990 CPUCP_NUM_OF_MSI_TYPES 991 }; 992 993 /* 994 * PLL enumeration table used for all ASICs and future SW versions. 995 * For future ASIC-LKD compatibility, we can only add new enumerations. 996 * at the end of the table. 997 * Changing the order of entries or removing entries is not allowed. 998 */ 999 enum pll_index { 1000 CPU_PLL = 0, 1001 PCI_PLL = 1, 1002 NIC_PLL = 2, 1003 DMA_PLL = 3, 1004 MESH_PLL = 4, 1005 MME_PLL = 5, 1006 TPC_PLL = 6, 1007 IF_PLL = 7, 1008 SRAM_PLL = 8, 1009 NS_PLL = 9, 1010 HBM_PLL = 10, 1011 MSS_PLL = 11, 1012 DDR_PLL = 12, 1013 VID_PLL = 13, 1014 BANK_PLL = 14, 1015 MMU_PLL = 15, 1016 IC_PLL = 16, 1017 MC_PLL = 17, 1018 EMMC_PLL = 18, 1019 D2D_PLL = 19, 1020 CS_PLL = 20, 1021 C2C_PLL = 21, 1022 NCH_PLL = 22, 1023 C2M_PLL = 23, 1024 PLL_MAX 1025 }; 1026 1027 enum rl_index { 1028 TPC_RL = 0, 1029 MME_RL, 1030 EDMA_RL, 1031 }; 1032 1033 enum pvt_index { 1034 PVT_SW, 1035 PVT_SE, 1036 PVT_NW, 1037 PVT_NE 1038 }; 1039 1040 /* Event Queue Packets */ 1041 1042 struct eq_generic_event { 1043 __le64 data[7]; 1044 }; 1045 1046 /* 1047 * CpuCP info 1048 */ 1049 1050 #define CARD_NAME_MAX_LEN 16 1051 #define CPUCP_MAX_SENSORS 128 1052 #define CPUCP_MAX_NICS 128 1053 #define CPUCP_LANES_PER_NIC 4 1054 #define CPUCP_NIC_QSFP_EEPROM_MAX_LEN 1024 1055 #define CPUCP_MAX_NIC_LANES (CPUCP_MAX_NICS * CPUCP_LANES_PER_NIC) 1056 #define CPUCP_NIC_MASK_ARR_LEN ((CPUCP_MAX_NICS + 63) / 64) 1057 #define CPUCP_NIC_POLARITY_ARR_LEN ((CPUCP_MAX_NIC_LANES + 63) / 64) 1058 #define CPUCP_HBM_ROW_REPLACE_MAX 32 1059 1060 struct cpucp_sensor { 1061 __le32 type; 1062 __le32 flags; 1063 }; 1064 1065 /** 1066 * struct cpucp_card_types - ASIC card type. 1067 * @cpucp_card_type_pci: PCI card. 1068 * @cpucp_card_type_pmc: PCI Mezzanine Card. 1069 */ 1070 enum cpucp_card_types { 1071 cpucp_card_type_pci, 1072 cpucp_card_type_pmc 1073 }; 1074 1075 #define CPUCP_SEC_CONF_ENABLED_SHIFT 0 1076 #define CPUCP_SEC_CONF_ENABLED_MASK 0x00000001 1077 1078 #define CPUCP_SEC_CONF_FLASH_WP_SHIFT 1 1079 #define CPUCP_SEC_CONF_FLASH_WP_MASK 0x00000002 1080 1081 #define CPUCP_SEC_CONF_EEPROM_WP_SHIFT 2 1082 #define CPUCP_SEC_CONF_EEPROM_WP_MASK 0x00000004 1083 1084 /** 1085 * struct cpucp_security_info - Security information. 1086 * @config: configuration bit field 1087 * @keys_num: number of stored keys 1088 * @revoked_keys: revoked keys bit field 1089 * @min_svn: minimal security version 1090 */ 1091 struct cpucp_security_info { 1092 __u8 config; 1093 __u8 keys_num; 1094 __u8 revoked_keys; 1095 __u8 min_svn; 1096 }; 1097 1098 /** 1099 * struct cpucp_info - Info from CpuCP that is necessary to the host's driver 1100 * @sensors: available sensors description. 1101 * @kernel_version: CpuCP linux kernel version. 1102 * @reserved: reserved field. 1103 * @card_type: card configuration type. 1104 * @card_location: in a server, each card has different connections topology 1105 * depending on its location (relevant for PMC card type) 1106 * @cpld_version: CPLD programmed F/W version. 1107 * @infineon_version: Infineon main DC-DC version. 1108 * @fuse_version: silicon production FUSE information. 1109 * @thermal_version: thermald S/W version. 1110 * @cpucp_version: CpuCP S/W version. 1111 * @infineon_second_stage_version: Infineon 2nd stage DC-DC version. 1112 * @dram_size: available DRAM size. 1113 * @card_name: card name that will be displayed in HWMON subsystem on the host 1114 * @tpc_binning_mask: TPC binning mask, 1 bit per TPC instance 1115 * (0 = functional, 1 = binned) 1116 * @decoder_binning_mask: Decoder binning mask, 1 bit per decoder instance 1117 * (0 = functional, 1 = binned), maximum 1 per dcore 1118 * @sram_binning: Categorize SRAM functionality 1119 * (0 = fully functional, 1 = lower-half is not functional, 1120 * 2 = upper-half is not functional) 1121 * @sec_info: security information 1122 * @pll_map: Bit map of supported PLLs for current ASIC version. 1123 * @mme_binning_mask: MME binning mask, 1124 * bits [0:6] <==> dcore0 mme fma 1125 * bits [7:13] <==> dcore1 mme fma 1126 * bits [14:20] <==> dcore0 mme ima 1127 * bits [21:27] <==> dcore1 mme ima 1128 * For each group, if the 6th bit is set then first 5 bits 1129 * represent the col's idx [0-31], otherwise these bits are 1130 * ignored, and col idx 32 is binned. 7th bit is don't care. 1131 * @dram_binning_mask: DRAM binning mask, 1 bit per dram instance 1132 * (0 = functional 1 = binned) 1133 * @memory_repair_flag: eFuse flag indicating memory repair 1134 * @edma_binning_mask: EDMA binning mask, 1 bit per EDMA instance 1135 * (0 = functional 1 = binned) 1136 * @xbar_binning_mask: Xbar binning mask, 1 bit per Xbar instance 1137 * (0 = functional 1 = binned) 1138 * @interposer_version: Interposer version programmed in eFuse 1139 * @substrate_version: Substrate version programmed in eFuse 1140 * @fw_hbm_region_size: Size in bytes of FW reserved region in HBM. 1141 * @fw_os_version: Firmware OS Version 1142 */ 1143 struct cpucp_info { 1144 struct cpucp_sensor sensors[CPUCP_MAX_SENSORS]; 1145 __u8 kernel_version[VERSION_MAX_LEN]; 1146 __le32 reserved; 1147 __le32 card_type; 1148 __le32 card_location; 1149 __le32 cpld_version; 1150 __le32 infineon_version; 1151 __u8 fuse_version[VERSION_MAX_LEN]; 1152 __u8 thermal_version[VERSION_MAX_LEN]; 1153 __u8 cpucp_version[VERSION_MAX_LEN]; 1154 __le32 infineon_second_stage_version; 1155 __le64 dram_size; 1156 char card_name[CARD_NAME_MAX_LEN]; 1157 __le64 tpc_binning_mask; 1158 __le64 decoder_binning_mask; 1159 __u8 sram_binning; 1160 __u8 dram_binning_mask; 1161 __u8 memory_repair_flag; 1162 __u8 edma_binning_mask; 1163 __u8 xbar_binning_mask; 1164 __u8 interposer_version; 1165 __u8 substrate_version; 1166 __u8 reserved2; 1167 struct cpucp_security_info sec_info; 1168 __le32 fw_hbm_region_size; 1169 __u8 pll_map[PLL_MAP_LEN]; 1170 __le64 mme_binning_mask; 1171 __u8 fw_os_version[VERSION_MAX_LEN]; 1172 }; 1173 1174 struct cpucp_mac_addr { 1175 __u8 mac_addr[ETH_ALEN]; 1176 }; 1177 1178 enum cpucp_serdes_type { 1179 TYPE_1_SERDES_TYPE, 1180 TYPE_2_SERDES_TYPE, 1181 HLS1_SERDES_TYPE, 1182 HLS1H_SERDES_TYPE, 1183 HLS2_SERDES_TYPE, 1184 HLS2_TYPE_1_SERDES_TYPE, 1185 MAX_NUM_SERDES_TYPE, /* number of types */ 1186 UNKNOWN_SERDES_TYPE = 0xFFFF /* serdes_type is u16 */ 1187 }; 1188 1189 struct cpucp_nic_info { 1190 struct cpucp_mac_addr mac_addrs[CPUCP_MAX_NICS]; 1191 __le64 link_mask[CPUCP_NIC_MASK_ARR_LEN]; 1192 __le64 pol_tx_mask[CPUCP_NIC_POLARITY_ARR_LEN]; 1193 __le64 pol_rx_mask[CPUCP_NIC_POLARITY_ARR_LEN]; 1194 __le64 link_ext_mask[CPUCP_NIC_MASK_ARR_LEN]; 1195 __u8 qsfp_eeprom[CPUCP_NIC_QSFP_EEPROM_MAX_LEN]; 1196 __le64 auto_neg_mask[CPUCP_NIC_MASK_ARR_LEN]; 1197 __le16 serdes_type; /* enum cpucp_serdes_type */ 1198 __le16 tx_swap_map[CPUCP_MAX_NICS]; 1199 __u8 reserved[6]; 1200 }; 1201 1202 #define PAGE_DISCARD_MAX 64 1203 1204 struct page_discard_info { 1205 __u8 num_entries; 1206 __u8 reserved[7]; 1207 __le32 mmu_page_idx[PAGE_DISCARD_MAX]; 1208 }; 1209 1210 /* 1211 * struct frac_val - fracture value represented by "integer.frac". 1212 * @integer: the integer part of the fracture value; 1213 * @frac: the fracture part of the fracture value. 1214 */ 1215 struct frac_val { 1216 union { 1217 struct { 1218 __le16 integer; 1219 __le16 frac; 1220 }; 1221 __le32 val; 1222 }; 1223 }; 1224 1225 /* 1226 * struct ser_val - the SER (symbol error rate) value is represented by "integer * 10 ^ -exp". 1227 * @integer: the integer part of the SER value; 1228 * @exp: the exponent part of the SER value. 1229 */ 1230 struct ser_val { 1231 __le16 integer; 1232 __le16 exp; 1233 }; 1234 1235 /* 1236 * struct cpucp_nic_status - describes the status of a NIC port. 1237 * @port: NIC port index. 1238 * @bad_format_cnt: e.g. CRC. 1239 * @responder_out_of_sequence_psn_cnt: e.g NAK. 1240 * @high_ber_reinit_cnt: link reinit due to high BER. 1241 * @correctable_err_cnt: e.g. bit-flip. 1242 * @uncorrectable_err_cnt: e.g. MAC errors. 1243 * @retraining_cnt: re-training counter. 1244 * @up: is port up. 1245 * @pcs_link: has PCS link. 1246 * @phy_ready: is PHY ready. 1247 * @auto_neg: is Autoneg enabled. 1248 * @timeout_retransmission_cnt: timeout retransmission events. 1249 * @high_ber_cnt: high ber events. 1250 * @pre_fec_ser: pre FEC SER value. 1251 * @post_fec_ser: post FEC SER value. 1252 * @throughput: measured throughput. 1253 * @latency: measured latency. 1254 */ 1255 struct cpucp_nic_status { 1256 __le32 port; 1257 __le32 bad_format_cnt; 1258 __le32 responder_out_of_sequence_psn_cnt; 1259 __le32 high_ber_reinit; 1260 __le32 correctable_err_cnt; 1261 __le32 uncorrectable_err_cnt; 1262 __le32 retraining_cnt; 1263 __u8 up; 1264 __u8 pcs_link; 1265 __u8 phy_ready; 1266 __u8 auto_neg; 1267 __le32 timeout_retransmission_cnt; 1268 __le32 high_ber_cnt; 1269 struct ser_val pre_fec_ser; 1270 struct ser_val post_fec_ser; 1271 struct frac_val bandwidth; 1272 struct frac_val lat; 1273 }; 1274 1275 enum cpucp_hbm_row_replace_cause { 1276 REPLACE_CAUSE_DOUBLE_ECC_ERR, 1277 REPLACE_CAUSE_MULTI_SINGLE_ECC_ERR, 1278 }; 1279 1280 struct cpucp_hbm_row_info { 1281 __u8 hbm_idx; 1282 __u8 pc; 1283 __u8 sid; 1284 __u8 bank_idx; 1285 __le16 row_addr; 1286 __u8 replaced_row_cause; /* enum cpucp_hbm_row_replace_cause */ 1287 __u8 pad; 1288 }; 1289 1290 struct cpucp_hbm_row_replaced_rows_info { 1291 __le16 num_replaced_rows; 1292 __u8 pad[6]; 1293 struct cpucp_hbm_row_info replaced_rows[CPUCP_HBM_ROW_REPLACE_MAX]; 1294 }; 1295 1296 enum cpu_reset_status { 1297 CPU_RST_STATUS_NA = 0, 1298 CPU_RST_STATUS_SOFT_RST_DONE = 1, 1299 }; 1300 1301 #define SEC_PCR_DATA_BUF_SZ 256 1302 #define SEC_PCR_QUOTE_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */ 1303 #define SEC_SIGNATURE_BUF_SZ 255 /* (256 - 1) 1 byte used for size */ 1304 #define SEC_PUB_DATA_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */ 1305 #define SEC_CERTIFICATE_BUF_SZ 2046 /* (2048 - 2) 2 bytes used for size */ 1306 1307 /* 1308 * struct cpucp_sec_attest_info - attestation report of the boot 1309 * @pcr_data: raw values of the PCR registers 1310 * @pcr_num_reg: number of PCR registers in the pcr_data array 1311 * @pcr_reg_len: length of each PCR register in the pcr_data array (bytes) 1312 * @nonce: number only used once. random number provided by host. this also 1313 * passed to the quote command as a qualifying data. 1314 * @pcr_quote_len: length of the attestation quote data (bytes) 1315 * @pcr_quote: attestation report data structure 1316 * @quote_sig_len: length of the attestation report signature (bytes) 1317 * @quote_sig: signature structure of the attestation report 1318 * @pub_data_len: length of the public data (bytes) 1319 * @public_data: public key for the signed attestation 1320 * (outPublic + name + qualifiedName) 1321 * @certificate_len: length of the certificate (bytes) 1322 * @certificate: certificate for the attestation signing key 1323 */ 1324 struct cpucp_sec_attest_info { 1325 __u8 pcr_data[SEC_PCR_DATA_BUF_SZ]; 1326 __u8 pcr_num_reg; 1327 __u8 pcr_reg_len; 1328 __le16 pad0; 1329 __le32 nonce; 1330 __le16 pcr_quote_len; 1331 __u8 pcr_quote[SEC_PCR_QUOTE_BUF_SZ]; 1332 __u8 quote_sig_len; 1333 __u8 quote_sig[SEC_SIGNATURE_BUF_SZ]; 1334 __le16 pub_data_len; 1335 __u8 public_data[SEC_PUB_DATA_BUF_SZ]; 1336 __le16 certificate_len; 1337 __u8 certificate[SEC_CERTIFICATE_BUF_SZ]; 1338 }; 1339 1340 /* 1341 * struct cpucp_dev_info_signed - device information signed by a secured device 1342 * @info: device information structure as defined above 1343 * @nonce: number only used once. random number provided by host. this number is 1344 * hashed and signed along with the device information. 1345 * @info_sig_len: length of the attestation signature (bytes) 1346 * @info_sig: signature of the info + nonce data. 1347 * @pub_data_len: length of the public data (bytes) 1348 * @public_data: public key info signed info data 1349 * (outPublic + name + qualifiedName) 1350 * @certificate_len: length of the certificate (bytes) 1351 * @certificate: certificate for the signing key 1352 */ 1353 struct cpucp_dev_info_signed { 1354 struct cpucp_info info; /* assumed to be 64bit aligned */ 1355 __le32 nonce; 1356 __le32 pad0; 1357 __u8 info_sig_len; 1358 __u8 info_sig[SEC_SIGNATURE_BUF_SZ]; 1359 __le16 pub_data_len; 1360 __u8 public_data[SEC_PUB_DATA_BUF_SZ]; 1361 __le16 certificate_len; 1362 __u8 certificate[SEC_CERTIFICATE_BUF_SZ]; 1363 }; 1364 1365 #define DCORE_MON_REGS_SZ 512 1366 /* 1367 * struct dcore_monitor_regs_data - DCORE monitor regs data. 1368 * the structure follows sync manager block layout. Obsolete. 1369 * @mon_pay_addrl: array of payload address low bits. 1370 * @mon_pay_addrh: array of payload address high bits. 1371 * @mon_pay_data: array of payload data. 1372 * @mon_arm: array of monitor arm. 1373 * @mon_status: array of monitor status. 1374 */ 1375 struct dcore_monitor_regs_data { 1376 __le32 mon_pay_addrl[DCORE_MON_REGS_SZ]; 1377 __le32 mon_pay_addrh[DCORE_MON_REGS_SZ]; 1378 __le32 mon_pay_data[DCORE_MON_REGS_SZ]; 1379 __le32 mon_arm[DCORE_MON_REGS_SZ]; 1380 __le32 mon_status[DCORE_MON_REGS_SZ]; 1381 }; 1382 1383 /* contains SM data for each SYNC_MNGR (Obsolete) */ 1384 struct cpucp_monitor_dump { 1385 struct dcore_monitor_regs_data sync_mngr_w_s; 1386 struct dcore_monitor_regs_data sync_mngr_e_s; 1387 struct dcore_monitor_regs_data sync_mngr_w_n; 1388 struct dcore_monitor_regs_data sync_mngr_e_n; 1389 }; 1390 1391 /* 1392 * The Type of the generic request (and other input arguments) will be fetched from user by reading 1393 * from "pkt_subidx" field in struct cpucp_packet. 1394 * 1395 * HL_PASSTHROUGHT_VERSIONS - Fetch all firmware versions. 1396 */ 1397 enum hl_passthrough_type { 1398 HL_PASSTHROUGH_VERSIONS, 1399 }; 1400 1401 #endif /* CPUCP_IF_H */ 1402