/linux-6.6.21/drivers/tty/serial/ |
D | serial_mctrl_gpio.c | 52 void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl) in mctrl_gpio_set() argument 59 if (gpios == NULL) in mctrl_gpio_set() 63 if (gpios->gpio[i] && mctrl_gpio_flags_is_dir_out(i)) { in mctrl_gpio_set() 64 desc_array[count] = gpios->gpio[i]; in mctrl_gpio_set() 79 struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, in mctrl_gpio_to_gpiod() argument 82 if (gpios == NULL) in mctrl_gpio_to_gpiod() 85 return gpios->gpio[gidx]; in mctrl_gpio_to_gpiod() 97 unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl) in mctrl_gpio_get() argument 101 if (gpios == NULL) in mctrl_gpio_get() 105 if (gpios->gpio[i] && !mctrl_gpio_flags_is_dir_out(i)) { in mctrl_gpio_get() [all …]
|
D | serial_mctrl_gpio.h | 38 void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl); 44 unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl); 51 mctrl_gpio_get_outputs(struct mctrl_gpios *gpios, unsigned int *mctrl); 56 struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, 82 void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios); 87 void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios); 92 void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios); 97 void mctrl_gpio_enable_irq_wake(struct mctrl_gpios *gpios); 102 void mctrl_gpio_disable_irq_wake(struct mctrl_gpios *gpios); 107 void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl) in mctrl_gpio_set() argument [all …]
|
/linux-6.6.21/sound/soc/ |
D | soc-jack.c | 207 struct snd_soc_jack_gpio *gpios; member 280 struct snd_soc_jack_gpio *gpios) in jack_free_gpios() argument 285 gpiod_unexport(gpios[i].desc); in jack_free_gpios() 286 unregister_pm_notifier(&gpios[i].pm_notifier); in jack_free_gpios() 287 free_irq(gpiod_to_irq(gpios[i].desc), &gpios[i]); in jack_free_gpios() 288 cancel_delayed_work_sync(&gpios[i].work); in jack_free_gpios() 289 gpiod_put(gpios[i].desc); in jack_free_gpios() 290 gpios[i].jack = NULL; in jack_free_gpios() 298 jack_free_gpios(tbl->jack, tbl->count, tbl->gpios); in jack_devres_free_gpios() 312 struct snd_soc_jack_gpio *gpios) in snd_soc_jack_add_gpios() argument [all …]
|
/linux-6.6.21/arch/arm64/boot/dts/microchip/ |
D | sparx5_pcb134_board.dtsi | 12 gpios = <&gpio 37 GPIO_ACTIVE_LOW>; 20 gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>; 24 gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>; 28 gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>; 32 gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>; 36 gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>; 40 gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>; 44 gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>; 48 gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>; 52 gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>; [all …]
|
/linux-6.6.21/arch/arm/boot/dts/nuvoton/ |
D | nuvoton-npcm750-runbmc-olympus.dts | 60 gpios = <&gpio3 14 1>; 65 gpios = <&gpio3 15 1>; 75 gpios = <&gpio0 19 0>; /* gpio19 */ 81 gpios = <&gpio0 18 0>; /* gpio18 */ 87 gpios = <&gpio0 17 0>; /* gpio17 */ 92 gpios = <&gpio0 16 0>; /* gpio16 */ 429 reset-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; 432 gpios = <0 0>; 438 gpios = <1 0>; 444 gpios = <2 0>; [all …]
|
D | nuvoton-npcm730-gbs.dts | 82 gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; 88 gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; 94 gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; 100 gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; 106 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; 112 gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; 118 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; 124 gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; 130 gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; 136 gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; [all …]
|
/linux-6.6.21/arch/arm/boot/dts/nxp/lpc/ |
D | lpc3250-ea3250.dts | 27 gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ 33 gpios = <&pca9532 0 0>; 39 gpios = <&pca9532 1 0>; 45 gpios = <&pca9532 2 0>; 51 gpios = <&pca9532 3 0>; 57 gpios = <&gpio 2 0 0>; /* P2.0 */ 63 gpios = <&gpio 2 1 0>; /* P2.1 */ 69 gpios = <&gpio 2 2 0>; /* P2.2 */ 75 gpios = <&gpio 2 3 0>; /* P2.3 */ 81 gpios = <&gpio 2 4 0>; /* P2.4 */ [all …]
|
/linux-6.6.21/sound/soc/codecs/ |
D | wm1250-ev1.c | 27 struct gpio gpios[WM1250_EV1_NUM_GPIOS]; member 37 ena = wm1250->gpios[WM1250_EV1_GPIO_CLK_ENA].gpio; in wm1250_ev1_set_bias_level() 83 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, in wm1250_ev1_hw_params() 85 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, in wm1250_ev1_hw_params() 89 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, in wm1250_ev1_hw_params() 91 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, in wm1250_ev1_hw_params() 95 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, in wm1250_ev1_hw_params() 97 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, in wm1250_ev1_hw_params() 101 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, in wm1250_ev1_hw_params() 103 gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, in wm1250_ev1_hw_params() [all …]
|
/linux-6.6.21/arch/arm/boot/dts/aspeed/ |
D | aspeed-bmc-opp-palmetto.dts | 45 gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>; 49 gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; 53 gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>; 66 clock-gpios = <&gpio ASPEED_GPIO(A, 4) GPIO_ACTIVE_HIGH>; 67 data-gpios = <&gpio ASPEED_GPIO(A, 5) GPIO_ACTIVE_HIGH>; 68 mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; 69 enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; 70 trans-gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>; 78 gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>; 214 gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>; [all …]
|
D | aspeed-bmc-lenovo-hr855xg2.dts | 60 gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>; 64 gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>; 430 gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>; 437 gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>; 444 gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; 451 gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>; 458 gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; 465 gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>; 472 gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>; 479 gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>; [all …]
|
/linux-6.6.21/drivers/platform/x86/siemens/ |
D | simatic-ipc-batt.c | 39 struct gpio_desc *gpios[3]; member 47 if (priv.gpios[2]) { in simatic_ipc_batt_read_gpio() 48 gpiod_set_value(priv.gpios[2], 1); in simatic_ipc_batt_read_gpio() 52 if (gpiod_get_value_cansleep(priv.gpios[0])) in simatic_ipc_batt_read_gpio() 54 else if (gpiod_get_value_cansleep(priv.gpios[1])) in simatic_ipc_batt_read_gpio() 57 if (priv.gpios[2]) in simatic_ipc_batt_read_gpio() 58 gpiod_set_value(priv.gpios[2], 0); in simatic_ipc_batt_read_gpio() 182 priv.gpios[0] = devm_gpiod_get_index(dev, "CMOSBattery empty", 0, GPIOD_IN); in simatic_ipc_batt_probe() 183 if (IS_ERR(priv.gpios[0])) { in simatic_ipc_batt_probe() 184 err = PTR_ERR(priv.gpios[0]); in simatic_ipc_batt_probe() [all …]
|
/linux-6.6.21/Documentation/devicetree/bindings/input/ |
D | gpio-mouse.txt | 9 - up-gpios: GPIO line phandle to the line indicating "up" 10 - down-gpios: GPIO line phandle to the line indicating "down" 11 - left-gpios: GPIO line phandle to the line indicating "left" 12 - right-gpios: GPIO line phandle to the line indicating "right" 15 - button-left-gpios: GPIO line handle to the left mouse button 16 - button-middle-gpios: GPIO line handle to the middle mouse button 17 - button-right-gpios: GPIO line handle to the right mouse button 25 up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; 26 down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; 27 left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; [all …]
|
/linux-6.6.21/Documentation/devicetree/bindings/power/supply/ |
D | maxim,max8903.yaml | 19 dok-gpios: 23 uok-gpios: 27 cen-gpios: 31 chg-gpios: 35 flt-gpios: 39 dcm-gpios: 43 usus-gpios: 52 - dok-gpios 54 - uok-gpios 63 dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; [all …]
|
/linux-6.6.21/Documentation/devicetree/bindings/phy/ |
D | phy-mapphone-mdm6600.txt | 5 - enable-gpios GPIO to enable the USB PHY 6 - power-gpios GPIO to power on the device 7 - reset-gpios GPIO to reset the device 8 - motorola,mode-gpios Two GPIOs to configure MDM6600 USB start-up mode for 10 - motorola,cmd-gpios Three GPIOs to control the power state of the MDM6600 11 - motorola,status-gpios Three GPIOs to read the power state of the MDM6600 17 enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; 18 power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; 19 reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; 20 motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, [all …]
|
/linux-6.6.21/drivers/watchdog/ |
D | mena21_wdt.c | 34 struct gpio_desc *gpios[NUM_GPIOS]; member 46 reset |= gpiod_get_value(drv->gpios[GPIO_WD_RST0]) ? (1 << 0) : 0; in a21_wdt_get_bootstatus() 47 reset |= gpiod_get_value(drv->gpios[GPIO_WD_RST1]) ? (1 << 1) : 0; in a21_wdt_get_bootstatus() 48 reset |= gpiod_get_value(drv->gpios[GPIO_WD_RST2]) ? (1 << 2) : 0; in a21_wdt_get_bootstatus() 57 gpiod_set_value(drv->gpios[GPIO_WD_ENAB], 1); in a21_wdt_start() 66 gpiod_set_value(drv->gpios[GPIO_WD_ENAB], 0); in a21_wdt_stop() 75 gpiod_set_value(drv->gpios[GPIO_WD_TRIG], 0); in a21_wdt_ping() 77 gpiod_set_value(drv->gpios[GPIO_WD_TRIG], 1); in a21_wdt_ping() 99 gpiod_set_value(drv->gpios[GPIO_WD_FAST], 1); in a21_wdt_set_timeout() 101 gpiod_set_value(drv->gpios[GPIO_WD_FAST], 0); in a21_wdt_set_timeout() [all …]
|
/linux-6.6.21/arch/arm/boot/dts/ti/omap/ |
D | am572x-idk-common.dtsi | 55 gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; 62 gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; 68 gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; 75 gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; 82 gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>; 88 gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>; 99 gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; 105 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; 111 gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; 117 gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; [all …]
|
D | am571x-idk.dts | 55 gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; 62 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; 68 gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; 75 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; 81 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; 87 gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; 98 gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; 104 gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; 110 gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; 116 gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; [all …]
|
/linux-6.6.21/Documentation/devicetree/bindings/siox/ |
D | eckelmann,siox-gpio.txt | 5 - din-gpios, dout-gpios, dclk-gpios, dld-gpios: references gpios for the 15 din-gpios = <&gpio6 11 0>; 16 dout-gpios = <&gpio6 8 0>; 17 dclk-gpios = <&gpio6 9 0>; 18 dld-gpios = <&gpio6 10 0>;
|
/linux-6.6.21/arch/arm/boot/dts/broadcom/ |
D | bcm4709-buffalo-wxr-1900dhp.dts | 33 gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; 38 gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; 43 gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; 49 gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; 54 gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; 59 gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; 64 gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; 69 gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; 74 gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; 84 gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; [all …]
|
D | bcm4708-buffalo-wzr-1750dhp.dts | 31 sck-gpios = <&chipcommon 7 0>; 32 mosi-gpios = <&chipcommon 4 0>; 33 cs-gpios = <&chipcommon 6 0>; 54 gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; 63 gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; 68 gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; 74 gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; 80 gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; 85 gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; 91 gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; [all …]
|
D | bcm4708-buffalo-wzr-1166dhp-common.dtsi | 19 sck-gpios = <&chipcommon 7 0>; 20 mosi-gpios = <&chipcommon 4 0>; 21 cs-gpios = <&chipcommon 6 0>; 44 gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; 55 gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; 62 gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; 70 gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; 78 gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; 85 gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; 93 gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; [all …]
|
/linux-6.6.21/drivers/gpu/drm/panel/ |
D | panel-ronbo-rb070d30.c | 37 } gpios; member 57 gpiod_set_value(ctx->gpios.power, 1); in rb070d30_panel_prepare() 59 gpiod_set_value(ctx->gpios.reset, 1); in rb070d30_panel_prepare() 68 gpiod_set_value(ctx->gpios.reset, 0); in rb070d30_panel_unprepare() 69 gpiod_set_value(ctx->gpios.power, 0); in rb070d30_panel_unprepare() 160 ctx->gpios.reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); in rb070d30_panel_dsi_probe() 161 if (IS_ERR(ctx->gpios.reset)) { in rb070d30_panel_dsi_probe() 163 return PTR_ERR(ctx->gpios.reset); in rb070d30_panel_dsi_probe() 166 ctx->gpios.power = devm_gpiod_get(&dsi->dev, "power", GPIOD_OUT_LOW); in rb070d30_panel_dsi_probe() 167 if (IS_ERR(ctx->gpios.power)) { in rb070d30_panel_dsi_probe() [all …]
|
/linux-6.6.21/Documentation/devicetree/bindings/net/nfc/ |
D | samsung,s3fwrn5.yaml | 18 en-gpios: 32 wake-gpios: 37 s3fwrn5,en-gpios: 41 Use en-gpios 43 s3fwrn5,fw-gpios: 47 Use wake-gpios 53 - en-gpios 54 - wake-gpios 83 en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; 84 wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; [all …]
|
/linux-6.6.21/arch/arm/boot/dts/microchip/ |
D | usb_a9g20-dab-mmx.dtsi | 30 gpios = <&pioB 20 GPIO_ACTIVE_LOW>; 37 * gpios = <&pioB 21 GPIO_ACTIVE_LOW>; 42 gpios = <&pioB 22 GPIO_ACTIVE_LOW>; 47 gpios = <&pioB 23 GPIO_ACTIVE_LOW>; 52 gpios = <&pioB 24 GPIO_ACTIVE_LOW>; 57 gpios = <&pioB 30 GPIO_ACTIVE_LOW>; 62 gpios = <&pioB 31 GPIO_ACTIVE_LOW>; 73 gpios = <&pioB 25 GPIO_ACTIVE_LOW>; 79 gpios = <&pioB 13 GPIO_ACTIVE_LOW>; 85 gpios = <&pioA 26 GPIO_ACTIVE_LOW>; [all …]
|
/linux-6.6.21/drivers/net/mdio/ |
D | mdio-mux-gpio.c | 18 struct gpio_descs *gpios; member 33 gpiod_set_array_value_cansleep(s->gpios->ndescs, s->gpios->desc, in mdio_mux_gpio_switch_fn() 34 s->gpios->info, values); in mdio_mux_gpio_switch_fn() 42 struct gpio_descs *gpios; in mdio_mux_gpio_probe() local 45 gpios = devm_gpiod_get_array(&pdev->dev, NULL, GPIOD_OUT_LOW); in mdio_mux_gpio_probe() 46 if (IS_ERR(gpios)) in mdio_mux_gpio_probe() 47 return PTR_ERR(gpios); in mdio_mux_gpio_probe() 53 s->gpios = gpios; in mdio_mux_gpio_probe()
|