| /linux-6.6.21/drivers/usb/host/ |
| D | ehci-sh.c | 13 struct clk *iclk, *fclk; member
114 priv->fclk = devm_clk_get(&pdev->dev, "usb_fck"); in ehci_hcd_sh_probe()
115 if (IS_ERR(priv->fclk)) in ehci_hcd_sh_probe()
116 priv->fclk = NULL; in ehci_hcd_sh_probe()
122 clk_enable(priv->fclk); in ehci_hcd_sh_probe()
139 clk_disable(priv->fclk); in ehci_hcd_sh_probe()
157 clk_disable(priv->fclk); in ehci_hcd_sh_remove()
|
| D | ohci-at91.c | 54 struct clk *fclk; member
78 clk_set_rate(ohci_at91->fclk, 48000000); in at91_start_clock()
81 clk_prepare_enable(ohci_at91->fclk); in at91_start_clock()
90 clk_disable_unprepare(ohci_at91->fclk); in at91_stop_clock()
215 ohci_at91->fclk = devm_clk_get(dev, "uhpck"); in usb_hcd_at91_probe()
216 if (IS_ERR(ohci_at91->fclk)) { in usb_hcd_at91_probe()
218 retval = PTR_ERR(ohci_at91->fclk); in usb_hcd_at91_probe()
|
| /linux-6.6.21/Documentation/devicetree/bindings/display/ti/ |
| D | ti,omap3-dss.txt | 14 - clocks: handle to fclk
37 - clocks: handle to fclk
52 - clocks: handles to fclk and iclk
64 - clocks: handle to fclk
82 - clocks: handles to fclk and pll clock
|
| D | ti,omap4-dss.txt | 14 - clocks: handle to fclk
36 - clocks: handle to fclk
51 - clocks: handles to fclk and iclk
67 - clocks: handle to fclk
88 - clocks: handles to fclk and pll clock
111 - clocks: handles to fclk and pll clock
|
| D | ti,omap5-dss.txt | 14 - clocks: handle to fclk
36 - clocks: handle to fclk
51 - clocks: handles to fclk and iclk
69 - clocks: handles to fclk and pll clock
92 - clocks: handles to fclk and pll clock
|
| D | ti,dra7-dss.txt | 14 - clocks: handle to fclk
47 - clocks: handle to fclk
66 - clocks: handles to fclk and pll clock
|
| /linux-6.6.21/drivers/media/dvb-frontends/ |
| D | s5h1420.c | 39 u32 fclk; member
368 tmp = state->fclk / tmp; in s5h1420_read_status()
475 do_div(val, (state->fclk / 1000)); in s5h1420_setsymbolrate()
502 val = -(int) ((freqoffset * (1<<24)) / (state->fclk / 1000000)); in s5h1420_setfreqoffset()
530 val = (((-val) * (state->fclk/1000000)) / (1<<24)); in s5h1420_getfreqoffset()
668 state->fclk = 80000000; in s5h1420_set_frontend()
670 state->fclk = 59000000; in s5h1420_set_frontend()
672 state->fclk = 86000000; in s5h1420_set_frontend()
674 state->fclk = 88000000; in s5h1420_set_frontend()
676 state->fclk = 44000000; in s5h1420_set_frontend()
[all …]
|
| D | cx24110.c | 231 u32 tmp, fclk, BDRI; in cx24110_set_symbolrate() local
251 fclk=90999000UL/2; in cx24110_set_symbolrate()
255 fclk=60666000UL; in cx24110_set_symbolrate()
259 fclk=80888000UL; in cx24110_set_symbolrate()
263 fclk=90999000UL; in cx24110_set_symbolrate()
265 dprintk("cx24110 debug: fclk %d Hz\n",fclk); in cx24110_set_symbolrate()
275 BDRI=fclk>>2; in cx24110_set_symbolrate()
288 dprintk("fclk = %d\n", fclk); in cx24110_set_symbolrate()
|
| D | mb86a20s.h | 22 u32 fclk; member
|
| /linux-6.6.21/drivers/clk/nuvoton/ |
| D | clk-ma35d1-pll.c | 146 unsigned long tmp, fout, fclk, diff; in ma35d1_pll_find_closest() local
153 fclk = div_u64(parent_rate * n, m); in ma35d1_pll_find_closest()
156 fclk = div_u64(fclk, 100); in ma35d1_pll_find_closest()
158 if (fclk < PLL_FCLK_MIN_FREQ || in ma35d1_pll_find_closest()
159 fclk > PLL_FCLK_MAX_FREQ) in ma35d1_pll_find_closest()
162 fout = div_u64(fclk, p); in ma35d1_pll_find_closest()
|
| /linux-6.6.21/arch/sh/drivers/pci/ |
| D | pcie-sh7786.c | 26 struct clk *fclk, phy_clk; member
224 port->fclk = clk_get(NULL, fclk_name); in pcie_clk_init()
225 if (IS_ERR(port->fclk)) { in pcie_clk_init()
226 ret = PTR_ERR(port->fclk); in pcie_clk_init()
230 clk_enable(port->fclk); in pcie_clk_init()
250 clk_disable(port->fclk); in pcie_clk_init()
251 clk_put(port->fclk); in pcie_clk_init()
|
| /linux-6.6.21/drivers/clocksource/ |
| D | timer-ti-dm.c | 122 struct clk *fclk; member
418 if (unlikely(!timer) || IS_ERR(timer->fclk)) in omap_dm_timer_set_source()
447 if (clk_hw_get_num_parents(__clk_get_hw(timer->fclk)) < 2) in omap_dm_timer_set_source()
457 ret = clk_set_parent(timer->fclk, parent); in omap_dm_timer_set_source()
729 if (timer && !IS_ERR(timer->fclk)) in omap_dm_timer_get_fclk()
730 return timer->fclk; in omap_dm_timer_get_fclk()
1136 timer->fclk = devm_clk_get(dev, "fck"); in omap_dm_timer_probe()
1137 if (IS_ERR(timer->fclk)) in omap_dm_timer_probe()
1138 return PTR_ERR(timer->fclk); in omap_dm_timer_probe()
1141 ret = devm_clk_notifier_register(dev, timer->fclk, in omap_dm_timer_probe()
[all …]
|
| /linux-6.6.21/drivers/iio/adc/ |
| D | ad7124.c | 262 unsigned int fclk, odr_sel_bits; in ad7124_set_channel_odr() local
264 fclk = clk_get_rate(st->mclk); in ad7124_set_channel_odr()
272 odr_sel_bits = DIV_ROUND_CLOSEST(fclk, odr * 32); in ad7124_set_channel_odr()
282 st->channels[channel].cfg.odr = DIV_ROUND_CLOSEST(fclk, odr_sel_bits * 32); in ad7124_set_channel_odr()
891 unsigned int fclk, power_mode; in ad7124_setup() local
894 fclk = clk_get_rate(st->mclk); in ad7124_setup()
895 if (!fclk) in ad7124_setup()
901 fclk); in ad7124_setup()
902 if (fclk != ad7124_master_clk_freq_hz[power_mode]) { in ad7124_setup()
903 ret = clk_set_rate(st->mclk, fclk); in ad7124_setup()
|
| D | ad7192.c | 183 u32 fclk; member
540 fadc = DIV_ROUND_CLOSEST(st->fclk, in ad7192_get_available_filter_freq()
544 fadc = DIV_ROUND_CLOSEST(st->fclk, in ad7192_get_available_filter_freq()
548 fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode)); in ad7192_get_available_filter_freq()
668 fadc = DIV_ROUND_CLOSEST(st->fclk, in ad7192_get_3db_filter_freq()
716 *val = st->fclk / in ad7192_read_raw()
767 div = st->fclk / (val * st->f_order * 1024); in ad7192_write_raw()
1062 st->fclk = AD7192_INT_FREQ_MHZ; in ad7192_probe()
1072 st->fclk = clk_get_rate(st->mclk); in ad7192_probe()
1073 if (!ad7192_valid_external_frequency(st->fclk)) { in ad7192_probe()
|
| /linux-6.6.21/drivers/pwm/ |
| D | pwm-omap-dmtimer.c | 159 struct clk *fclk; in pwm_omap_dmtimer_config() local
168 fclk = omap->pdata->get_fclk(omap->dm_timer); in pwm_omap_dmtimer_config()
169 if (!fclk) { in pwm_omap_dmtimer_config()
174 clk_rate = clk_get_rate(fclk); in pwm_omap_dmtimer_config()
|
| /linux-6.6.21/drivers/i2c/busses/ |
| D | i2c-omap.c | 355 struct clk *fclk; in omap_i2c_init() local
374 fclk = clk_get(omap->dev, "fck"); in omap_i2c_init()
375 if (IS_ERR(fclk)) { in omap_i2c_init()
376 error = PTR_ERR(fclk); in omap_i2c_init()
382 fclk_rate = clk_get_rate(fclk); in omap_i2c_init()
383 clk_put(fclk); in omap_i2c_init()
413 fclk = clk_get(omap->dev, "fck"); in omap_i2c_init()
414 if (IS_ERR(fclk)) { in omap_i2c_init()
415 error = PTR_ERR(fclk); in omap_i2c_init()
420 fclk_rate = clk_get_rate(fclk) / 1000; in omap_i2c_init()
[all …]
|
| /linux-6.6.21/sound/soc/ti/ |
| D | omap-dmic.c | 36 struct clk *fclk; member
330 mux = clk_get_parent(dmic->fclk); in omap_dmic_select_fclk()
476 dmic->fclk = devm_clk_get(dmic->dev, "fck"); in asoc_dmic_probe()
477 if (IS_ERR(dmic->fclk)) { in asoc_dmic_probe()
|
| /linux-6.6.21/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/ |
| D | vg_clk_mgr.c | 572 if (clock_table->DfPstateTable[i].fclk != 0) { in vg_clk_mgr_helper_populate_bw_params()
587 bw_params->clk_table.entries[i].fclk_mhz = clock_table->DfPstateTable[j].fclk; in vg_clk_mgr_helper_populate_bw_params()
592 bw_params->clk_table.entries[i].fclk_mhz = clock_table->DfPstateTable[j].fclk; in vg_clk_mgr_helper_populate_bw_params()
629 { .fclk = 400, .memclk = 400, .voltage = 2800 },
630 { .fclk = 400, .memclk = 400, .voltage = 2800 },
631 { .fclk = 400, .memclk = 400, .voltage = 2800 },
632 { .fclk = 400, .memclk = 400, .voltage = 2800 }
|
| /linux-6.6.21/drivers/net/hamradio/ |
| D | baycom_epp.c | 167 unsigned int fclk; member
306 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps, in eppconfig()
307 (bc->cfg.fclk + 8 * bc->cfg.bps) / (16 * bc->cfg.bps), in eppconfig()
984 bc->cfg.fclk = simple_strtoul(cp+5, NULL, 0); in baycom_setmode()
985 if (bc->cfg.fclk < 1000000) in baycom_setmode()
986 bc->cfg.fclk = 1000000; in baycom_setmode()
987 if (bc->cfg.fclk > 25000000) in baycom_setmode()
988 bc->cfg.fclk = 25000000; in baycom_setmode()
1083 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps, in baycom_siocdevprivate()
1208 bc->cfg.fclk = 19666600; in baycom_epp_dev_setup()
|
| /linux-6.6.21/drivers/mmc/host/ |
| D | omap.c | 130 struct clk * fclk; member
195 clk_enable(host->fclk); in mmc_omap_fclk_enable()
197 clk_disable(host->fclk); in mmc_omap_fclk_enable()
1147 int func_clk_rate = clk_get_rate(host->fclk); in mmc_omap_calc_divisor()
1420 host->fclk = clk_get(&pdev->dev, "fck"); in mmc_omap_probe()
1421 if (IS_ERR(host->fclk)) { in mmc_omap_probe()
1422 ret = PTR_ERR(host->fclk); in mmc_omap_probe()
1426 ret = clk_prepare(host->fclk); in mmc_omap_probe()
1500 clk_unprepare(host->fclk); in mmc_omap_probe()
1502 clk_put(host->fclk); in mmc_omap_probe()
[all …]
|
| /linux-6.6.21/Documentation/devicetree/bindings/mmc/ |
| D | ti-omap-hsmmc.txt | 92 swakeup | | fclk
98 In suspend the fclk is off and the module is dysfunctional. Even register reads
99 will fail. A small logic in the host will request fclk restore, when an
|
| /linux-6.6.21/drivers/clk/zynq/ |
| D | clkc.c | 102 static void __init zynq_clk_register_fclk(enum zynq_clk fclk, in zynq_clk_register_fclk() argument
146 clks[fclk] = clk_register_gate(NULL, clk_name, in zynq_clk_register_fclk()
151 if (clk_prepare_enable(clks[fclk])) in zynq_clk_register_fclk()
153 fclk - fclk0); in zynq_clk_register_fclk()
170 clks[fclk] = ERR_PTR(-ENOMEM); in zynq_clk_register_fclk()
|
| /linux-6.6.21/arch/arm64/boot/dts/ti/ |
| D | k3-am62p-main.dtsi | 123 clock-names = "fclk";
133 clock-names = "fclk";
|
| D | k3-am62p-wakeup.dtsi | 29 clock-names = "fclk";
|
| /linux-6.6.21/arch/arm/mach-omap2/ |
| D | prm3xxx.c | 230 u32 wkst, fclk, iclk, clken; in omap3xxx_prm_clear_mod_irqs() local
243 fclk = omap2_cm_read_mod_reg(module, fclk_off); in omap3xxx_prm_clear_mod_irqs()
260 omap2_cm_write_mod_reg(fclk, module, fclk_off); in omap3xxx_prm_clear_mod_irqs()
|