| /linux-6.6.21/drivers/isdn/hardware/mISDN/ |
| D | isdnhdlc.c | 67 hdlc->data_bits = 8; in isdnhdlc_out_init()
154 h->data_bits = h->ffbit_shift - 1; \ in isdnhdlc_decode()
217 hdlc->data_bits = 0; in isdnhdlc_decode()
247 hdlc->data_bits++; in isdnhdlc_decode()
259 hdlc->data_bits = 0; in isdnhdlc_decode()
269 hdlc->data_bits++; in isdnhdlc_decode()
281 if (hdlc->data_bits == 8) { in isdnhdlc_decode()
282 hdlc->data_bits = 0; in isdnhdlc_decode()
404 (8 - hdlc->data_bits); in isdnhdlc_encode()
414 hdlc->data_bits++; in isdnhdlc_encode()
[all …]
|
| D | isdnhdlc.h | 22 int data_bits; member
|
| /linux-6.6.21/drivers/gpu/drm/gma500/ |
| D | intel_i2c.c | 67 u32 reserved = 0, data_bits; in set_data() local
75 data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK; in set_data()
77 data_bits = in set_data()
81 REG_WRITE(chan->reg, reserved | data_bits); in set_data()
|
| D | intel_gmbus.c | 158 u32 data_bits; in set_data() local
161 data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK; in set_data()
163 data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK | in set_data()
166 GMBUS_REG_WRITE(gpio->reg, reserved | data_bits); in set_data()
|
| /linux-6.6.21/drivers/comedi/drivers/ |
| D | comedi_bond.c | 67 unsigned int write_mask, data_bits; in bonding_dio_insn_bits() local
71 data_bits = data[1]; in bonding_dio_insn_bits()
98 b_data_bits = (data_bits >> n_done) & b_mask; in bonding_dio_insn_bits()
|
| D | cb_pcidas64.c | 3557 enum data_bits { in caldac_i2c_write() enum
|
| /linux-6.6.21/include/linux/ |
| D | synclink.h | 30 unsigned char data_bits; member
|
| /linux-6.6.21/drivers/usb/serial/ |
| D | mxuport.c | 841 u8 data_bits; in mxuport_set_termios() local
861 data_bits = MX_WORDLENGTH_5; in mxuport_set_termios()
864 data_bits = MX_WORDLENGTH_6; in mxuport_set_termios()
867 data_bits = MX_WORDLENGTH_7; in mxuport_set_termios()
871 data_bits = MX_WORDLENGTH_8; in mxuport_set_termios()
898 buf[0] = data_bits; in mxuport_set_termios()
926 dev_dbg(&port->dev, "data_bits : %d\n", data_bits); in mxuport_set_termios()
|
| D | cypress_m8.c | 292 struct usb_serial_port *port, speed_t baud_rate, int data_bits, in cypress_serial_control() argument
330 feature_buffer[4] |= data_bits - 5; /* assign data bits in 2 bit space ( max 3 ) */ in cypress_serial_control()
868 int data_bits, stop_bits, parity_type, parity_enable; in cypress_set_termios() local
892 data_bits = tty_get_char_size(cflag); in cypress_set_termios()
905 __func__, stop_bits, parity_enable, parity_type, data_bits); in cypress_set_termios()
908 data_bits, stop_bits, in cypress_set_termios()
|
| /linux-6.6.21/net/bluetooth/rfcomm/ |
| D | tty.c | 865 u8 baud, data_bits, stop_bits, parity, x_on, x_off; in rfcomm_tty_set_termios() local
937 data_bits = RFCOMM_RPN_DATA_5; in rfcomm_tty_set_termios()
940 data_bits = RFCOMM_RPN_DATA_6; in rfcomm_tty_set_termios()
943 data_bits = RFCOMM_RPN_DATA_7; in rfcomm_tty_set_termios()
946 data_bits = RFCOMM_RPN_DATA_8; in rfcomm_tty_set_termios()
949 data_bits = RFCOMM_RPN_DATA_8; in rfcomm_tty_set_termios()
994 data_bits, stop_bits, parity, in rfcomm_tty_set_termios()
|
| D | core.c | 997 u8 bit_rate, u8 data_bits, u8 stop_bits, in rfcomm_send_rpn() argument
1008 s, cr, dlci, bit_rate, data_bits, stop_bits, parity, in rfcomm_send_rpn()
1023 rpn->line_settings = __rpn_line_settings(data_bits, stop_bits, parity); in rfcomm_send_rpn()
1490 u8 data_bits = 0; in rfcomm_recv_rpn() local
1508 data_bits = RFCOMM_RPN_DATA_8; in rfcomm_recv_rpn()
1530 data_bits = __get_rpn_data_bits(rpn->line_settings); in rfcomm_recv_rpn()
1531 if (data_bits != RFCOMM_RPN_DATA_8) { in rfcomm_recv_rpn()
1532 BT_DBG("RPN data bits mismatch 0x%x", data_bits); in rfcomm_recv_rpn()
1533 data_bits = RFCOMM_RPN_DATA_8; in rfcomm_recv_rpn()
1584 rfcomm_send_rpn(s, 0, dlci, bit_rate, data_bits, stop_bits, in rfcomm_recv_rpn()
|
| /linux-6.6.21/drivers/gpu/drm/i915/display/ |
| D | intel_gmbus.c | 296 u32 data_bits; in set_data() local
299 data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK; in set_data()
301 data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK | in set_data()
304 intel_de_write_notrace(i915, bus->gpio_reg, reserved | data_bits); in set_data()
|
| /linux-6.6.21/include/uapi/linux/ |
| D | synclink.h | 166 unsigned char data_bits; /* 7 or 8 data bits */ member
|
| /linux-6.6.21/include/net/bluetooth/ |
| D | rfcomm.h | 229 u8 bit_rate, u8 data_bits, u8 stop_bits,
|
| /linux-6.6.21/drivers/tty/ |
| D | synclink_gt.c | 336 .data_bits = 8,
1078 tmp_params.data_bits = info->params.data_bits; in get_params32()
1109 info->params.data_bits = tmp_params.data_bits; in set_params32()
2460 info->params.data_bits = tty_get_char_size(cflag); in change_params()
2471 bits_per_char = info->params.data_bits + in change_params()
4036 switch (info->params.data_bits) in async_mode()
4076 switch (info->params.data_bits) in async_mode()
|
| /linux-6.6.21/drivers/staging/greybus/ |
| D | uart.c | 496 newline.data_bits = tty_get_char_size(termios->c_cflag); in gb_tty_set_termios()
886 gb_tty->line_coding.data_bits = 8; in gb_uart_probe()
|
| /linux-6.6.21/include/acpi/ |
| D | acrestyp.h | 465 u8 data_bits; member
|
| /linux-6.6.21/arch/ia64/include/asm/ |
| D | pal.h | 231 u32 data_bits : 8, /* # data bits covered by member
255 #define pcpi_data_bits pcp_info.data_bits
|
| /linux-6.6.21/drivers/acpi/acpica/ |
| D | rsdumpinfo.c | 510 {ACPI_RSD_3BITFLAG, ACPI_RSD_OFFSET(uart_serial_bus.data_bits),
|
| D | rsserial.c | 596 {ACPI_RSC_3BITFLAG, ACPI_RS_OFFSET(data.uart_serial_bus.data_bits),
|
| /linux-6.6.21/include/linux/greybus/ |
| D | greybus_protocols.h | 1337 __u8 data_bits; member
|