/linux-6.6.21/drivers/tty/serial/8250/ |
D | 8250_fourport.c | 12 #define SERIAL8250_FOURPORT(_base, _irq) \ argument 13 SERIAL8250_PORT_FLAGS(_base, _irq, UPF_FOURPORT)
|
D | 8250.h | 103 #define SERIAL8250_PORT_FLAGS(_base, _irq, _flags) \ argument 106 .irq = _irq, \ 112 #define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0) argument
|
/linux-6.6.21/sound/soc/codecs/ |
D | cs35l45.h | 411 #define CS35L45_IRQ(_irq, _name, _hand) \ argument 413 .irq = CS35L45_ ## _irq ## _IRQ,\ 424 #define CS35L45_REG_IRQ(_reg, _irq) \ argument 425 [CS35L45_ ## _irq ## _IRQ] = { \ 427 .mask = CS35L45_ ## _irq ## _MASK \
|
/linux-6.6.21/drivers/pinctrl/sunxi/ |
D | pinctrl-sunxi.h | 211 #define SUNXI_FUNCTION_IRQ(_val, _irq) \ argument 215 .irqnum = _irq, \ 218 #define SUNXI_FUNCTION_IRQ_BANK(_val, _bank, _irq) \ argument 223 .irqnum = _irq, \
|
/linux-6.6.21/arch/arm/mach-ep93xx/ |
D | dma.c | 29 #define DMA_CHANNEL(_name, _base, _irq) \ argument 30 { .name = (_name), .base = (_base), .irq = (_irq) }
|
/linux-6.6.21/arch/mips/alchemy/common/ |
D | platform.c | 51 #define PORT(_base, _irq) \ argument 55 .irq = _irq, \ 288 #define MAC_RES(_base, _enable, _irq, _macdma) \ argument 300 .start = _irq, \ 301 .end = _irq, \
|
/linux-6.6.21/arch/xtensa/platforms/xt2000/ |
D | setup.c | 89 #define _SERIAL_PORT(_base,_irq) \ argument 93 .irq = (_irq), \
|
/linux-6.6.21/arch/mips/sgi-ip32/ |
D | ip32-platform.c | 21 #define MACE_PORT(offset,_irq) \ argument 24 .irq = _irq, \
|
/linux-6.6.21/drivers/irqchip/ |
D | irq-madera.c | 22 #define MADERA_IRQ(_irq, _reg) \ argument 23 [MADERA_IRQ_ ## _irq] = { \ 25 .mask = MADERA_ ## _irq ## _EINT1 \
|
/linux-6.6.21/arch/mips/jazz/ |
D | setup.c | 98 #define MEMPORT(_base, _irq) \ argument 102 .irq = (_irq), \
|
/linux-6.6.21/include/linux/ |
D | ioport.h | 181 #define DEFINE_RES_IRQ_NAMED(_irq, _name) \ argument 182 DEFINE_RES_NAMED((_irq), 1, (_name), IORESOURCE_IRQ) 183 #define DEFINE_RES_IRQ(_irq) \ argument 184 DEFINE_RES_IRQ_NAMED((_irq), NULL)
|
D | regmap.h | 1493 #define REGMAP_IRQ_REG(_irq, _off, _mask) \ argument 1494 [_irq] = { .reg_offset = (_off), .mask = (_mask) }
|
/linux-6.6.21/arch/mips/sni/ |
D | a20r.c | 20 #define PORT(_base,_irq) \ argument 23 .irq = _irq, \
|
D | pcimt.c | 70 #define PORT(_base,_irq) \ argument 73 .irq = _irq, \
|
D | pcit.c | 22 #define PORT(_base,_irq) \ argument 25 .irq = _irq, \
|
D | rm200.c | 27 #define MEMPORT(_base,_irq) \ argument 30 .irq = _irq, \
|
/linux-6.6.21/include/sound/ |
D | cs35l41.h | 839 #define CS35L41_IRQ(_irq, _name, _hand) \ argument 841 .irq = CS35L41_ ## _irq ## _IRQ,\ 852 #define CS35L41_REG_IRQ(_reg, _irq) \ argument 853 [CS35L41_ ## _irq ## _IRQ] = { \ 855 .mask = CS35L41_ ## _irq ## _MASK \
|
/linux-6.6.21/drivers/scsi/arm/ |
D | acornscsi.h | 261 #define ADD_STATUS(_q,_ssr,_ph,_irq) \ argument 266 host->status[(_q)][host->status_ptr[(_q)]].irq = (_irq); \
|
/linux-6.6.21/drivers/mfd/ |
D | wcd934x.c | 19 #define WCD934X_REGMAP_IRQ_REG(_irq, _off, _mask) \ argument 20 [_irq] = { \
|
/linux-6.6.21/drivers/power/supply/ |
D | max8925_power.c | 372 #define REQUEST_IRQ(_irq, _name) \ argument 374 ret = request_threaded_irq(chip->irq_base + _irq, NULL, \ 379 _irq, ret); \
|
/linux-6.6.21/drivers/gpio/ |
D | gpio-ts5500.c | 75 #define TS5500_DIO_IN_IRQ(addr, bit, _irq) \ argument 80 .irq = _irq, \
|
D | gpio-ep93xx.c | 286 #define EP93XX_GPIO_BANK(_label, _data, _dir, _irq, _base, _has_irq, _has_hier, _irq_base) \ argument 291 .irq = _irq, \
|
/linux-6.6.21/include/pcmcia/ |
D | ds.h | 121 u16 _irq:1; member
|
/linux-6.6.21/Documentation/pcmcia/ |
D | locking.rst | 120 u16 _irq:1;
|
/linux-6.6.21/drivers/pcmcia/ |
D | pcmcia_resource.c | 701 p_dev->_irq = 1; in pcmcia_request_irq() 950 if (p_dev->_irq) { in pcmcia_disable_device() 952 p_dev->_irq = 0; in pcmcia_disable_device()
|