/linux-6.6.21/Documentation/misc-devices/ |
D | xilinx_sdfec.rst | 4 Xilinx SD-FEC Driver 10 This driver supports SD-FEC Integrated Block for Zynq |Ultrascale+ (TM)| RFSoCs. 15 For a full description of SD-FEC core features, see the `SD-FEC Product Guide (PG256) <https://www.… 24 Missing features, known issues, and limitations of the SD-FEC driver are as 28 - Reset of the SD-FEC Integrated Block is not controlled by this driver 38 The driver works with the SD-FEC core in two modes of operation: 50 - Activate the SD-FEC core 51 - Monitor the SD-FEC core for errors 52 - Retrieve the status and configuration of the SD-FEC core 61 - Activate the SD-FEC core [all …]
|
/linux-6.6.21/drivers/mmc/host/ |
D | Kconfig | 3 # MMC/SD host controller drivers 6 comment "MMC/SD/SDIO Host Controller Drivers" 37 bool "Qualcomm Data Mover for SD Card Controller" 41 This selects the Qualcomm Data Mover lite/local on SD Card controller. 122 supports MMC cards on the SD controller, but if it is not 255 tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller" 260 This selects the Cadence SD/SDIO/eMMC driver. 308 tristate "SDHCI platform support for the Tegra SD/MMC Controller" 314 This selects the Tegra SD/MMC controller. If you have a Tegra 315 platform with SD or MMC devices, say Y or M here. [all …]
|
/linux-6.6.21/drivers/infiniband/hw/hfi1/ |
D | sdma.c | 49 #define SD(name) SEND_DMA_##name macro 51 (SD(ENG_ERR_STATUS_SDMA_WRONG_DW_ERR_SMASK) \ 52 | SD(ENG_ERR_STATUS_SDMA_GEN_MISMATCH_ERR_SMASK) \ 53 | SD(ENG_ERR_STATUS_SDMA_TOO_LONG_ERR_SMASK) \ 54 | SD(ENG_ERR_STATUS_SDMA_TAIL_OUT_OF_BOUNDS_ERR_SMASK) \ 55 | SD(ENG_ERR_STATUS_SDMA_FIRST_DESC_ERR_SMASK) \ 56 | SD(ENG_ERR_STATUS_SDMA_MEM_READ_ERR_SMASK) \ 57 | SD(ENG_ERR_STATUS_SDMA_HALT_ERR_SMASK) \ 58 | SD(ENG_ERR_STATUS_SDMA_LENGTH_MISMATCH_ERR_SMASK) \ 59 | SD(ENG_ERR_STATUS_SDMA_PACKET_DESC_OVERFLOW_ERR_SMASK) \ [all …]
|
/linux-6.6.21/Documentation/driver-api/mmc/ |
D | mmc-dev-attrs.rst | 2 SD and MMC Block Device Attributes 6 SD or MMC device. 14 SD and MMC Device Attributes 22 scr SD Card Configuration Register (SD only) 25 (SD and MMCv1 only) 27 (SD and MMCv1 only) 32 (SD and MMCv4 only) 51 always one 512 byte sector. For SD, "erase_size" is 512 54 SD/MMC cards can erase an arbitrarily large area up to and 72 (especially for SD where it is just one sector), [all …]
|
/linux-6.6.21/arch/arm/boot/dts/nxp/imx/ |
D | imx6ull-dhcom-som-cfg-sdcard.dtsi | 7 * Special SoM configuration: SD card 9 * Enabled: Micro SD card on module or 10 * external SD card via DHCOM depends on hardware variant 17 * To use usdhc1 as SD card, the WiFi node must be deleted. 42 /* Micro SD card on module or external SD card via DHCOM */
|
D | imx6qdl-dhcom-drc02.dtsi | 13 * Special SoM hardware required which uses the pins from micro SD card. The 15 * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. Therefore the micro SD 102 &usdhc2 { /* SD card */ 108 * Due to the use of can2 the micro SD card on module have to be
|
/linux-6.6.21/Documentation/devicetree/bindings/dma/ |
D | stericsson,dma40.yaml | 23 1: SD/MMC controller 0 (unused) 24 2: SD/MMC controller 1 (unused) 25 3: SD/MMC controller 2 (unused) 50 28: SD/MMC controller 2 51 29: SD/MMC controller 0 54 32: SD/MMC controller 1 63 41: SD/MMC controller 3 64 42: SD/MMC controller 4 65 43: SD/MMC controller 5
|
/linux-6.6.21/Documentation/devicetree/bindings/mmc/ |
D | sdhci-am654.yaml | 62 description: Output tap delay for SD/MMC legacy timing 74 description: Output tap delay for SD high speed timing 80 description: Output tap delay for SD UHS SDR12 timing 86 description: Output tap delay for SD UHS SDR25 timing 92 description: Output tap delay for SD UHS SDR50 timing 98 description: Output tap delay for SD UHS SDR104 timing 104 description: Output tap delay for SD UHS DDR50 timing 132 description: Input tap delay for SD/MMC legacy timing 144 description: Input tap delay for SD high speed timing 150 description: Input tap delay for SD UHS SDR12 timing [all …]
|
D | aspeed,sdhci.yaml | 8 title: ASPEED SD/SDIO/MMC Controller 15 The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO 39 description: The SD/SDIO controller clock gate 58 description: The SD bus clock 61 description: The SD interrupt shared between both slots
|
D | sdhci-sprd.txt | 3 The Secure Digital (SD) Host controller on Spreadtrum SoCs provides an interface 4 for MMC, SD and SDIO types of cards. 34 - sprd,phy-delay-sd-highspeed: Delay value for SD high-speed timing. 35 - sprd,phy-delay-sd-uhs-sdr50: Delay value for SD UHS SDR50 timing. 36 - sprd,phy-delay-sd-uhs-sdr104: Delay value for SD UHS SDR50 timing.
|
D | cdns,sdhci.yaml | 7 title: Cadence SD/SDIO/eMMC Host Controller (SD4HC) 40 description: Value of the delay in the input path for SD high-speed timing 52 description: Value of the delay in the input path for SD UHS SDR12 timing 58 description: Value of the delay in the input path for SD UHS SDR25 timing 64 description: Value of the delay in the input path for SD UHS SDR50 timing 70 description: Value of the delay in the input path for SD UHS DDR50 timing
|
D | mmc-controller.yaml | 52 # *NOTE* on CD and WP polarity. To use common for all SD/MMC host 94 - for SD/SDIO cards the SDR104 mode has a max supported 133 SD high-speed timing is supported. 143 SD UHS SDR12 speed is supported. 148 SD UHS SDR25 speed is supported. 153 SD UHS SDR50 speed is supported. 158 SD UHS SDR104 speed is supported. 163 SD UHS DDR50 speed is supported. 252 Controller is limited to send SD commands during initialization. 316 sequence. To successfully detect an (e)MMC/SD/SDIO card, that [all …]
|
D | socionext,uniphier-sd.yaml | 7 title: UniPhier SD/SDIO/eMMC controller 63 - description: ID of SD instance 66 The argument is the ID of SD instance.
|
D | marvell,xenon-sdhci.yaml | 82 All those types of PHYs can support eMMC, SD and SDIO. Please note that 126 always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25, 127 SD Default Speed and HS mode and eMMC legacy speed mode. 220 // For SD/SDIO 261 // For SD/SDIO with compatible "marvell,armada-3700-sdhci":
|
/linux-6.6.21/Documentation/devicetree/bindings/clock/ |
D | idt,versaclock5.yaml | 38 SH SP Output when the SD/OE pin is Low/High 88 shut down if the SD/OE pin is driven high. If 0, this disables the 90 the value of the SD/OE pin. This property corresponds to the SH 97 If 1, this enables output when the SD/OE pin is high, and disables 98 output when the SD/OE pin is low. If 0, this disables output when 99 the SD/OE pin is high, and enables output when the SD/OE pin is 181 /* Set the SD/OE pin's settings */
|
/linux-6.6.21/drivers/gpu/drm/sti/ |
D | NOTES | 14 - The HDMI / DVO / HD Analog / SD analog IP builds the video signals 18 - The SD analog signal is typically used for legacy TV 29 dec | | | mixer| | +---+ SD analog +--> CVBS 45 - The Bridges/Connectors are mapped to the HDMI / DVO / HD Analog / SD analog 57 | | | mixer| | +-> | | SD analog | <-+
|
/linux-6.6.21/Documentation/devicetree/bindings/soc/socionext/ |
D | socionext,uniphier-sdctrl.yaml | 7 title: Socionext UniPhier SD interface logic 13 SD interface logic implemented on Socionext UniPhier SoCs is 14 attached outside SDHC, and has some SD related functions such as
|
D | socionext,uniphier-mioctrl.yaml | 15 SD/eMMC, and MIO-DMAC. 18 Recent SoCs have SD interface logic specialized only for SD functions
|
/linux-6.6.21/drivers/clk/qcom/ |
D | Kconfig | 110 i2c, USB, SD/eMMC, SATA, PCIe, etc. 147 i2c, USB, SD/eMMC, etc. 155 i2c, USB, SD/eMMC, etc. 163 i2c, USB, SD/eMMC, etc. 170 i2c, USB, SD/eMMC, etc. Select this for the root clock 179 i2c, USB, SD/eMMC, etc. 196 i2c, USB, SD/eMMC, etc. Select this for the root clock 204 i2c, USB, SD/eMMC, etc. Select this for the root clock 213 i2c, USB, SD/eMMC, etc. 222 SD/eMMC, display, graphics, camera etc. [all …]
|
/linux-6.6.21/Documentation/devicetree/bindings/media/i2c/ |
D | adv7343.txt | 6 definition (SD), enhanced definition (ED), or high definition (HD) video 22 - ad,adv7343-sd-config-dac-out: array configure SD DAC Output's 1 and 2, 0 = OFF 42 /* Use SD DAC output 1 */
|
/linux-6.6.21/drivers/mmc/ |
D | Kconfig | 7 tristate "MMC/SD/SDIO card support" 13 If you want MMC/SD/SDIO support, you should say Y here and
|
/linux-6.6.21/arch/arm64/boot/dts/nvidia/ |
D | tegra194-p3668-0000.dtsi | 5 model = "NVIDIA Jetson Xavier NX (SD-card)"; 13 /* SDMMC1 (SD/MMC) */
|
/linux-6.6.21/arch/arm/boot/dts/marvell/ |
D | kirkwood-openrd.dtsi | 79 * (serial@12100) and SD (mvsdio@90000). 82 * High: SD 88 output-high; /* Select SD by default */
|
/linux-6.6.21/Documentation/devicetree/bindings/regulator/ |
D | vqmmc-ipq4019-regulator.yaml | 7 title: Qualcomm IPQ4019 VQMMC SD LDO regulator 13 Qualcomm IPQ4019 SoC-s feature a built a build SD/EMMC controller,
|
/linux-6.6.21/Documentation/translations/zh_CN/scheduler/ |
D | sched-domains.rst | 64 SD标志位调节了哪些东西。 66 体系结构可以把指定的拓扑层级的通用调度域构建器和默认的SD标志位覆盖掉,方法是创建一个
|