| /linux-6.6.21/drivers/pwm/ |
| D | pwm-vt8500.c | 28 #define REG_CTRL(pwm) (((pwm) << 4) + 0x00) macro
114 val = readl(vt8500->base + REG_CTRL(pwm->hwpwm)); in vt8500_pwm_config()
116 writel(val, vt8500->base + REG_CTRL(pwm->hwpwm)); in vt8500_pwm_config()
135 val = readl(vt8500->base + REG_CTRL(pwm->hwpwm)); in vt8500_pwm_enable()
137 writel(val, vt8500->base + REG_CTRL(pwm->hwpwm)); in vt8500_pwm_enable()
148 val = readl(vt8500->base + REG_CTRL(pwm->hwpwm)); in vt8500_pwm_disable()
150 writel(val, vt8500->base + REG_CTRL(pwm->hwpwm)); in vt8500_pwm_disable()
163 val = readl(vt8500->base + REG_CTRL(pwm->hwpwm)); in vt8500_pwm_set_polarity()
170 writel(val, vt8500->base + REG_CTRL(pwm->hwpwm)); in vt8500_pwm_set_polarity()
|
| /linux-6.6.21/drivers/i2c/busses/ |
| D | i2c-meson.c | 22 #define REG_CTRL 0x00 macro
170 meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK, in meson_gxbb_axg_i2c_set_clk_div()
173 meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT_MASK, in meson_gxbb_axg_i2c_set_clk_div()
202 meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK, in meson6_i2c_set_clk_div()
205 meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT_MASK, in meson6_i2c_set_clk_div()
310 meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0); in meson_i2c_irq()
311 ctrl = readl(i2c->regs + REG_CTRL); in meson_i2c_irq()
330 meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, REG_CTRL_START); in meson_i2c_irq()
368 meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_ACK_IGNORE, flags); in meson_i2c_xfer_msg()
380 meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, REG_CTRL_START); in meson_i2c_xfer_msg()
[all …]
|
| /linux-6.6.21/drivers/video/backlight/ |
| D | lm3630a_bl.c | 19 #define REG_CTRL 0x00 macro
101 rval |= lm3630a_update(pchip, REG_CTRL, 0x14, pdata->leda_ctrl); in lm3630a_chip_init()
102 rval |= lm3630a_update(pchip, REG_CTRL, 0x0B, pdata->ledb_ctrl); in lm3630a_chip_init()
139 rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); in lm3630a_isr_func()
199 ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); in lm3630a_bank_a_update_status()
208 ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDA_ENABLE, 0); in lm3630a_bank_a_update_status()
210 ret |= lm3630a_update(pchip, REG_CTRL, in lm3630a_bank_a_update_status()
240 rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); in lm3630a_bank_a_get_brightness()
276 ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); in lm3630a_bank_b_update_status()
285 ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDB_ENABLE, 0); in lm3630a_bank_b_update_status()
[all …]
|
| /linux-6.6.21/drivers/phy/amlogic/ |
| D | phy-meson8b-usb2.c | 27 #define REG_CTRL 0x04 macro
172 regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK, in phy_meson8b_usb2_power_on()
175 regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_FSEL_MASK, in phy_meson8b_usb2_power_on()
179 regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, in phy_meson8b_usb2_power_on()
182 regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0); in phy_meson8b_usb2_power_on()
185 regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT, in phy_meson8b_usb2_power_on()
227 regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, in phy_meson8b_usb2_power_off()
|
| /linux-6.6.21/drivers/clk/ |
| D | clk-apple-nco.c | 23 #define REG_CTRL 0 macro
82 val = readl_relaxed(chan->base + REG_CTRL); in applnco_enable_nolock()
83 writel_relaxed(val | CTRL_ENABLE, chan->base + REG_CTRL); in applnco_enable_nolock()
91 val = readl_relaxed(chan->base + REG_CTRL); in applnco_disable_nolock()
92 writel_relaxed(val & ~CTRL_ENABLE, chan->base + REG_CTRL); in applnco_disable_nolock()
99 return (readl_relaxed(chan->base + REG_CTRL) & CTRL_ENABLE) != 0; in applnco_is_enabled()
|
| /linux-6.6.21/drivers/mfd/ |
| D | ti_am335x_tscadc.c | 261 regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl); in ti_tscadc_probe()
266 regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB); in ti_tscadc_probe()
328 regmap_read(tscadc->regmap, REG_CTRL, &ctrl); in tscadc_suspend()
331 regmap_write(tscadc->regmap, REG_CTRL, ctrl); in tscadc_suspend()
345 regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl); in tscadc_resume()
347 regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB); in tscadc_resume()
|
| /linux-6.6.21/drivers/video/fbdev/ |
| D | xilinxfb.c | 62 #define REG_CTRL 1 macro
234 xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); in xilinx_fb_blank()
242 xilinx_fb_out32(drvdata, REG_CTRL, 0); in xilinx_fb_blank()
312 xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); in xilinxfb_assign()
369 xilinx_fb_out32(drvdata, REG_CTRL, 0); in xilinxfb_assign()
393 xilinx_fb_out32(drvdata, REG_CTRL, 0); in xilinxfb_release()
|
| /linux-6.6.21/drivers/iio/adc/ |
| D | ti_am335x_adc.c | 164 config = tiadc_readl(adc_dev, REG_CTRL); in tiadc_irq_h()
166 tiadc_writel(adc_dev, REG_CTRL, config); in tiadc_irq_h()
180 tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_SSENB)); in tiadc_irq_h()
712 idle = tiadc_readl(adc_dev, REG_CTRL); in tiadc_suspend()
714 tiadc_writel(adc_dev, REG_CTRL, idle | CNTRLREG_POWERDOWN); in tiadc_suspend()
726 restore = tiadc_readl(adc_dev, REG_CTRL); in tiadc_resume()
728 tiadc_writel(adc_dev, REG_CTRL, restore); in tiadc_resume()
|
| /linux-6.6.21/drivers/spi/ |
| D | spi-meson-spifc.c | 24 #define REG_CTRL 0x08 macro
254 regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB, 0); in meson_spifc_transfer_one()
264 regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB, in meson_spifc_transfer_one()
|
| /linux-6.6.21/include/linux/mfd/ |
| D | ti_am335x_tscadc.h | 22 #define REG_CTRL 0x040 macro
|