/linux-6.6.21/arch/arm64/boot/dts/freescale/ |
D | imx8mq-nitrogen.dts | 369 MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x19 /* Pin 19 */ 370 MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19 /* Pin 21 */ 371 MX8MQ_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x19 /* Pin 23 */ 372 MX8MQ_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x19 /* Pin 25 */ 373 MX8MQ_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x19 /* Pin 27 */ 374 MX8MQ_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x19 /* Pin 29 */ 375 MX8MQ_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 /* Pin 31 */ 376 MX8MQ_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 /* Pin 33 */ 377 MX8MQ_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 /* Pin 35 */ 378 MX8MQ_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x19 /* Pin 39 */ [all …]
|
/linux-6.6.21/arch/arm/boot/dts/amlogic/ |
D | meson8b-odroidc1.dts | 234 "J2 Header Pin 35", "J2 Header Pin 36", 235 "J2 Header Pin 32", "J2 Header Pin 31", 236 "J2 Header Pin 29", "J2 Header Pin 18", 237 "J2 Header Pin 22", "J2 Header Pin 16", 238 "J2 Header Pin 23", "J2 Header Pin 21", 239 "J2 Header Pin 19", "J2 Header Pin 33", 240 "J2 Header Pin 8", "J2 Header Pin 10", 241 "J2 Header Pin 15", "J2 Header Pin 13", 242 "J2 Header Pin 24", "J2 Header Pin 26", 245 "J2 Header Pin 7", "", "J2 Header Pin 12", [all …]
|
/linux-6.6.21/arch/arm64/boot/dts/hisilicon/ |
D | hi6220-hikey.dts | 356 * Pin assignments taken from LeMaker and CircuitCo Schematics 384 "GPIO-A", /* LSEC Pin 23: GPIO2_0 */ 385 "GPIO-B", /* LSEC Pin 24: GPIO2_1 */ 386 "GPIO-C", /* LSEC Pin 25: GPIO2_2 */ 387 "GPIO-D", /* LSEC Pin 26: GPIO2_3 */ 388 "GPIO-E", /* LSEC Pin 27: GPIO2_4 */ 390 "GPIO-H"; /* LSEC Pin 30: GPIO2_7 */ 405 "[UART1_RxD]", /* LSEC Pin 11: UART3_RX */ 406 "[UART1_TxD]", /* LSEC Pin 13: UART3_TX */ 408 "[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */ [all …]
|
/linux-6.6.21/Documentation/devicetree/bindings/iio/frequency/ |
D | adi,adf4377.yaml | 44 GPIO that controls the Chip Enable Pin. 49 GPIO that controls the Enable Clock 1 Output Buffer Pin. 54 GPIO that controls the Enable Clock 2 Output Buffer Pin. 60 high_z - MUXOUT Pin set to high-Z. 61 lock_detect - MUXOUT Pin set to lock detector output. 62 muxout_low - MUXOUT Pin set to low. 63 f_div_rclk_2 - MUXOUT Pin set to fDIV_RCLK/2. 64 f_div_nclk_2 - MUXOUT Pin set to fDIV_NCLK/2. 65 muxout_high - MUXOUT Pin set to high.
|
/linux-6.6.21/Documentation/devicetree/bindings/pinctrl/ |
D | marvell,dove-pinctrl.txt | 64 pmu-nc Pin not driven by any PM function 65 pmu-low Pin driven low (0) 66 pmu-high Pin driven high (1) 67 pmic(sdi) Pin is used for PMIC SDI 68 cpu-pwr-down Pin is used for CPU_PWRDWN 69 standby-pwr-down Pin is used for STBY_PWRDWN 70 core-pwr-good Pin is used for CORE_PWR_GOOD (Pins 0-7 only) 71 cpu-pwr-good Pin is used for CPU_PWR_GOOD (Pins 8-15 only) 72 bat-fault Pin is used for BATTERY_FAULT 73 ext0-wakeup Pin is used for EXT0_WU [all …]
|
D | renesas,rza1-ports.yaml | 7 title: Renesas RZ/A1 combined Pin and GPIO controller 14 The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO 16 Pin multiplexing and GPIO configuration is performed on a per-pin basis 146 * Pin #0 on port #3 is configured as alternate function #6. 147 * Pin #2 on port #3 is configured as alternate function #4. 156 * Pin #4 on port #1 is configured as alternate function #1. 157 * Pin #5 on port #1 is configured as alternate function #1. 172 * Pin #0 on port #4 is configured as alternate function #2 182 * Pin #1 on port #4 is configured as alternate function #1
|
D | cnxt,cx92755-pinctrl.txt | 1 Conexant Digicolor CX92755 General Purpose Pin Mapping 7 === Pin Controller Node === 12 - reg: Base address of the General Purpose Pin Mapping register block and the 34 === Pin Configuration Node === 44 === Pin Group Node === 56 Required Pin Group Node Properties:
|
D | samsung,pinctrl.yaml | 80 Pin banks of the controller are represented by child nodes of the 155 /* Pin bank with external GPIO or muxed external wake-up interrupts */ 185 /* Pin bank with external GPIO or muxed external wake-up interrupts */ 235 /* Pin bank with external GPIO or muxed external wake-up interrupts */ 243 /* Pin bank without external interrupts */ 249 /* Pin bank with external direct wake-up interrupts */ 320 /* Pin bank with external direct wake-up interrupts */ 368 /* Pin bank with external GPIO or muxed external wake-up interrupts */
|
D | berlin,pinctrl.txt | 1 * Pin-controller driver for the Marvell Berlin SoCs 3 Pin control registers are part of both chip controller and system 4 controller register sets. Pin controller nodes should be a sub-node of
|
D | renesas,pfc.yaml | 7 title: Renesas Pin Function Controller (GPIO and Pin Mux/Config) 13 The Pin Function Controller (PFC) is a Pin Mux/Config controller. 105 Pin controller client devices use pin configuration subnodes (children
|
D | renesas,rzv2m-pinctrl.yaml | 7 title: Renesas RZ/V2M combined Pin and GPIO controller 14 The Renesas RZ/V2M SoC features a combined Pin and GPIO controller. 15 Pin multiplexing and GPIO configuration is performed on a per-pin basis. 61 Pin controller client devices use pin configuration subnodes (children
|
D | renesas,rza2-pinctrl.yaml | 7 title: Renesas RZ/A2 combined Pin and GPIO controller 14 The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO 16 Pin multiplexing and GPIO configuration is performed on a per-pin basis.
|
D | renesas,rzg2l-pinctrl.yaml | 7 title: Renesas RZ/{G2L,V2L} combined Pin and GPIO controller 14 The Renesas SoCs of the RZ/{G2L,V2L} alike series feature a combined Pin and 16 Pin multiplexing and GPIO configuration is performed on a per-pin basis. 81 Pin controller client devices use pin configuration subnodes (children
|
/linux-6.6.21/Documentation/devicetree/bindings/net/ |
D | mdio-mux-gpio.yaml | 61 interrupts = <10 8>; /* Pin 10, active low */ 70 interrupts = <10 8>; /* Pin 10, active low */ 79 interrupts = <10 8>; /* Pin 10, active low */ 88 interrupts = <10 8>; /* Pin 10, active low */ 104 interrupts = <12 8>; /* Pin 12, active low */ 113 interrupts = <12 8>; /* Pin 12, active low */ 122 interrupts = <12 8>; /* Pin 12, active low */ 131 interrupts = <12 8>; /* Pin 12, active low */
|
/linux-6.6.21/Documentation/devicetree/bindings/sound/ |
D | cirrus,cs35l45.yaml | 102 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' 103 2 = Pin acts as MDSYNC, direction controlled by MDSYNC 107 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' 108 2 = Pin acts as open drain INT 110 4 = Pin acts as push-pull output INT. Active low. 111 5 = Pin acts as push-pull output INT. Active high. 115 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir'
|
D | rt274.txt | 18 * DMIC1 Pin 19 * DMIC2 Pin 23 * HPO Pin
|
D | cs4265.txt | 20 codec_ad0_high: cs4265@4f { /* AD0 Pin is high */ 26 codec_ad0_low: cs4265@4e { /* AD0 Pin is low */
|
D | ak4613.yaml | 37 description: Input Pin 1 - 2. 41 description: Output Pin 1 - 6.
|
/linux-6.6.21/rust/kernel/init/ |
D | __internal.rs | 165 pub fn init<E>(self: Pin<&mut Self>, init: impl PinInit<T, E>) -> Result<Pin<&mut T>, E> { in init() 167 let this = unsafe { Pin::into_inner_unchecked(self) }; in init() 180 Ok(unsafe { Pin::new_unchecked(this.value.assume_init_mut()) }) in init()
|
/linux-6.6.21/rust/kernel/sync/ |
D | arc.rs | 32 pin::Pin, 316 impl<T: ?Sized> From<Pin<UniqueArc<T>>> for Arc<T> { 317 fn from(item: Pin<UniqueArc<T>>) -> Self { in from() 319 unsafe { Pin::into_inner_unchecked(item).inner } in from() 579 ) -> core::result::Result<Pin<UniqueArc<T>>, E> { in pin_init_with() 590 impl<T: ?Sized> From<UniqueArc<T>> for Pin<UniqueArc<T>> { implementation 594 unsafe { Pin::new_unchecked(obj) } in from()
|
/linux-6.6.21/rust/kernel/ |
D | init.rs | 225 pin::Pin, 820 F: FnOnce(Pin<&mut T>) -> Result<(), E>, in pin_chain() 836 F: FnOnce(Pin<&mut T>) -> Result<(), E>, 844 let val = unsafe { Pin::new_unchecked(val) }; in __pinned_init() 1118 fn try_pin_init<E>(init: impl PinInit<T, E>) -> Result<Pin<Self>, E> in try_pin_init() 1126 fn pin_init<E>(init: impl PinInit<T, E>) -> error::Result<Pin<Self>> in pin_init() 1157 fn try_pin_init<E>(init: impl PinInit<T, E>) -> Result<Pin<Self>, E> in try_pin_init() 1187 fn try_pin_init<E>(init: impl PinInit<T, E>) -> Result<Pin<Self>, E> in try_pin_init() 1251 fn drop(self: Pin<&mut Self>, only_call_from_drop: __internal::OnlyCallFromDrop); in drop()
|
/linux-6.6.21/Documentation/input/devices/ |
D | amijoy.rst | 13 Pin Meaning Pin Meaning 27 Pin Meaning 44 Pin Meaning 61 Pin Meaning 78 Pin Meaning 152 | Directions | Pin# | Counter bits |
|
/linux-6.6.21/arch/arm/boot/dts/nxp/imx/ |
D | imx6ull-colibri-aster.dts | 52 /* Pin already used by atmel_mxt_ts touchscreen */ 58 /* Pin already used by atmel_mxt_ts touchscreen */
|
D | imx6ull-colibri-wifi-aster.dts | 52 /* Pin already used by atmel_mxt_ts touchscreen */ 58 /* Pin already used by atmel_mxt_ts touchscreen */
|
/linux-6.6.21/Documentation/devicetree/bindings/gpio/ |
D | xlnx,zynqmp-gpio-modepin.yaml | 7 title: ZynqMP Mode Pin GPIO controller 10 PS_MODE is 4-bits boot mode pins sampled on POR deassertion. Mode Pin
|