1 /*
2  * This file is subject to the terms and conditions of the GNU General Public
3  * License.  See the file "COPYING" in the main directory of this archive
4  * for more details.
5  *
6  * Derived from IRIX <sys/SN/klconfig.h>.
7  *
8  * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
9  * Copyright (C) 1999, 2000 by Ralf Baechle
10  */
11 #ifndef _ASM_SN_KLCONFIG_H
12 #define _ASM_SN_KLCONFIG_H
13 
14 /*
15  * The KLCONFIG structures store info about the various BOARDs found
16  * during Hardware Discovery. In addition, it stores info about the
17  * components found on the BOARDs.
18  */
19 
20 /*
21  * WARNING:
22  *	Certain assembly language routines (notably xxxxx.s) in the IP27PROM
23  *	will depend on the format of the data structures in this file.	In
24  *	most cases, rearranging the fields can seriously break things.
25  *	Adding fields in the beginning or middle can also break things.
26  *	Add fields if necessary, to the end of a struct in such a way
27  *	that offsets of existing fields do not change.
28  */
29 
30 #include <linux/types.h>
31 #include <asm/sn/types.h>
32 
33 #if defined(CONFIG_SGI_IP27)
34 
35 #include <asm/sn/sn0/addrs.h>
36 //#include <sys/SN/router.h>
37 // XXX Stolen from <sys/SN/router.h>:
38 #define MAX_ROUTER_PORTS (6)	/* Max. number of ports on a router */
39 #include <asm/sn/fru.h>
40 //#include <sys/graph.h>
41 //#include <sys/xtalk/xbow.h>
42 
43 #elif defined(CONFIG_SGI_IP35)
44 
45 #include <asm/sn/sn1/addrs.h>
46 #include <sys/sn/router.h>
47 #include <sys/graph.h>
48 #include <asm/xtalk/xbow.h>
49 
50 #endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
51 
52 #if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35)
53 #include <asm/sn/agent.h>
54 #include <asm/fw/arc/types.h>
55 #include <asm/fw/arc/hinv.h>
56 #if defined(CONFIG_SGI_IP35)
57 // The hack file has to be before vector and after sn0_fru....
58 #include <asm/hack.h>
59 #include <asm/sn/vector.h>
60 #include <asm/xtalk/xtalk.h>
61 #endif /* CONFIG_SGI_IP35 */
62 #endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */
63 
64 typedef u64  nic_t;
65 
66 #define KLCFGINFO_MAGIC 0xbeedbabe
67 
68 typedef s32 klconf_off_t;
69 
70 /*
71  * Some IMPORTANT OFFSETS. These are the offsets on all NODES.
72  */
73 #define MAX_MODULE_ID		255
74 #define SIZE_PAD		4096 /* 4k padding for structures */
75 /*
76  * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets,
77  * 2 Midplanes assuming no pci card cages
78  */
79 #define MAX_SLOTS_PER_NODE	(1 + 2 + 6 + 2)
80 
81 /* XXX if each node is guaranteed to have some memory */
82 
83 #define MAX_PCI_DEVS		8
84 
85 /* lboard_t->brd_flags fields */
86 /* All bits in this field are currently used. Try the pad fields if
87    you need more flag bits */
88 
89 #define ENABLE_BOARD		0x01
90 #define FAILED_BOARD		0x02
91 #define DUPLICATE_BOARD		0x04	/* Boards like midplanes/routers which
92 					   are discovered twice. Use one of them */
93 #define VISITED_BOARD		0x08	/* Used for compact hub numbering. */
94 #define LOCAL_MASTER_IO6	0x10	/* master io6 for that node */
95 #define GLOBAL_MASTER_IO6	0x20
96 #define THIRD_NIC_PRESENT	0x40	/* for future use */
97 #define SECOND_NIC_PRESENT	0x80	/* addons like MIO are present */
98 
99 /* klinfo->flags fields */
100 
101 #define KLINFO_ENABLE		0x01	/* This component is enabled */
102 #define KLINFO_FAILED		0x02	/* This component failed */
103 #define KLINFO_DEVICE		0x04	/* This component is a device */
104 #define KLINFO_VISITED		0x08	/* This component has been visited */
105 #define KLINFO_CONTROLLER	0x10	/* This component is a device controller */
106 #define KLINFO_INSTALL		0x20	/* Install a driver */
107 #define KLINFO_HEADLESS		0x40	/* Headless (or hubless) component */
108 #define IS_CONSOLE_IOC3(i)	((((klinfo_t *)i)->flags) & KLINFO_INSTALL)
109 
110 #define GB2		0x80000000
111 
112 #define MAX_RSV_PTRS	32
113 
114 /* Structures to manage various data storage areas */
115 /* The numbers must be contiguous since the array index i
116    is used in the code to allocate various areas.
117 */
118 
119 #define BOARD_STRUCT		0
120 #define COMPONENT_STRUCT	1
121 #define ERRINFO_STRUCT		2
122 #define KLMALLOC_TYPE_MAX	(ERRINFO_STRUCT + 1)
123 #define DEVICE_STRUCT		3
124 
125 
126 typedef struct console_s {
127 	unsigned long	uart_base;
128 	unsigned long	config_base;
129 	unsigned long	memory_base;
130 	short		baud;
131 	short		flag;
132 	int		type;
133 	nasid_t		nasid;
134 	char		wid;
135 	char		npci;
136 	nic_t		baseio_nic;
137 } console_t;
138 
139 typedef struct klc_malloc_hdr {
140 	klconf_off_t km_base;
141 	klconf_off_t km_limit;
142 	klconf_off_t km_current;
143 } klc_malloc_hdr_t;
144 
145 /* Functions/macros needed to use this structure */
146 
147 typedef struct kl_config_hdr {
148 	u64		ch_magic;	/* set this to KLCFGINFO_MAGIC */
149 	u32		ch_version;    /* structure version number */
150 	klconf_off_t	ch_malloc_hdr_off; /* offset of ch_malloc_hdr */
151 	klconf_off_t	ch_cons_off;	   /* offset of ch_cons */
152 	klconf_off_t	ch_board_info;	/* the link list of boards */
153 	console_t	ch_cons_info;	/* address info of the console */
154 	klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX];
155 	confidence_t	ch_sw_belief;	/* confidence that software is bad*/
156 	confidence_t	ch_sn0net_belief; /* confidence that sn0net is bad */
157 } kl_config_hdr_t;
158 
159 
160 #define KL_CONFIG_HDR(_nasid)	((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
161 #define KL_CONFIG_INFO_OFFSET(_nasid)					\
162 	(KL_CONFIG_HDR(_nasid)->ch_board_info)
163 #define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off)				\
164 	(KL_CONFIG_HDR(_nasid)->ch_board_info = (_off))
165 
166 #define KL_CONFIG_INFO(_nasid)						\
167 	(lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ?		\
168 	 NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \
169 	 0)
170 #define KL_CONFIG_MAGIC(_nasid)		(KL_CONFIG_HDR(_nasid)->ch_magic)
171 
172 #define KL_CONFIG_CHECK_MAGIC(_nasid)					\
173 	(KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC)
174 
175 #define KL_CONFIG_HDR_INIT_MAGIC(_nasid)	\
176 		  (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC)
177 
178 /* --- New Macros for the changed kl_config_hdr_t structure --- */
179 
180 #define PTR_CH_MALLOC_HDR(_k)	((klc_malloc_hdr_t *)\
181 			((unsigned long)_k + (_k->ch_malloc_hdr_off)))
182 
183 #define KL_CONFIG_CH_MALLOC_HDR(_n)   PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n))
184 
185 #define PTR_CH_CONS_INFO(_k)	((console_t *)\
186 			((unsigned long)_k + (_k->ch_cons_off)))
187 
188 #define KL_CONFIG_CH_CONS_INFO(_n)   PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n))
189 
190 /* ------------------------------------------------------------- */
191 
192 #define KL_CONFIG_INFO_START(_nasid)	\
193 	(klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t))
194 
195 #define KL_CONFIG_BOARD_NASID(_brd)	((_brd)->brd_nasid)
196 #define KL_CONFIG_BOARD_SET_NEXT(_brd, _off)	((_brd)->brd_next = (_off))
197 
198 #define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD)
199 
200 #define XBOW_PORT_TYPE_HUB(_xbowp, _link)	\
201 	       ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB)
202 #define XBOW_PORT_TYPE_IO(_xbowp, _link)	\
203 	       ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO)
204 
205 #define XBOW_PORT_IS_ENABLED(_xbowp, _link)	\
206 	       ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE)
207 #define XBOW_PORT_NASID(_xbowp, _link)	\
208 	       ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid)
209 
210 #define XBOW_PORT_IO	 0x1
211 #define XBOW_PORT_HUB	 0x2
212 #define XBOW_PORT_ENABLE 0x4
213 
214 #define SN0_PORT_FENCE_SHFT	0
215 #define SN0_PORT_FENCE_MASK	(1 << SN0_PORT_FENCE_SHFT)
216 
217 /*
218  * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
219  * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
220  * the LOCAL/current NODE. REMOTE means it is attached to a different
221  * node.(TBD - Need a way to treat ROUTER boards.)
222  *
223  * There are 2 different structures to represent these boards -
224  * lboard - Local board, rboard - remote board. These 2 structures
225  * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
226  * Figure below). The first byte of the rboard or lboard structure
227  * is used to find out its type - no unions are used.
228  * If it is a lboard, then the config info of this board will be found
229  * on the local node. (LOCAL NODE BASE + offset value gives pointer to
230  * the structure.
231  * If it is a rboard, the local structure contains the node number
232  * and the offset of the beginning of the LINKED LIST on the remote node.
233  * The details of the hardware on a remote node can be built locally,
234  * if required, by reading the LINKED LIST on the remote node and
235  * ignoring all the rboards on that node.
236  *
237  * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
238  * First board info on the remote node. The remote node list is
239  * traversed as the local list, using the REMOTE BASE ADDRESS and not
240  * the local base address and ignoring all rboard values.
241  *
242  *
243  KLCONFIG
244 
245  +------------+	     +------------+	 +------------+	     +------------+
246  |  lboard    |	 +-->|	 lboard	  |  +-->|   rboard   |	 +-->|	 lboard	  |
247  +------------+	 |   +------------+  |	 +------------+	 |   +------------+
248  | board info |	 |   | board info |  |	 |errinfo,bptr|	 |   | board info |
249  +------------+	 |   +------------+  |	 +------------+	 |   +------------+
250  | offset     |--+   |	offset	  |--+	 |  offset    |--+   |offset=NULL |
251  +------------+	     +------------+	 +------------+	     +------------+
252 
253 
254  +------------+
255  | board info |
256  +------------+	      +--------------------------------+
257  | compt 1    |------>| type, rev, diaginfo, size ...  |  (CPU)
258  +------------+	      +--------------------------------+
259  | compt 2    |--+
260  +------------+	 |    +--------------------------------+
261  |  ...	      |	 +--->| type, rev, diaginfo, size ...  |  (MEM_BANK)
262  +------------+	      +--------------------------------+
263  | errinfo    |--+
264  +------------+	 |    +--------------------------------+
265 		 +--->|r/l brd errinfo,compt err flags |
266 		      +--------------------------------+
267 
268  *
269  * Each BOARD consists of COMPONENTs and the BOARD structure has
270  * pointers (offsets) to its COMPONENT structure.
271  * The COMPONENT structure has version info, size and speed info, revision,
272  * error info and the NIC info. This structure can accommodate any
273  * BOARD with arbitrary COMPONENT composition.
274  *
275  * The ERRORINFO part of each BOARD has error information
276  * that describes errors about the BOARD itself. It also has flags to
277  * indicate the COMPONENT(s) on the board that have errors. The error
278  * information specific to the COMPONENT is present in the respective
279  * COMPONENT structure.
280  *
281  * The ERRORINFO structure is also treated like a COMPONENT, ie. the
282  * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
283  * structure also has a pointer to the ERRORINFO structure. This is
284  * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
285  * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
286  * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
287  * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
288  * which is present on the REMOTE NODE.(TBD)
289  * REMOTE ERRINFO can be stored on any of the nearest nodes
290  * or on all the nearest nodes.(TBD)
291  * Like BOARD structures, REMOTE ERRINFO structures can be built locally
292  * using the rboard errinfo pointer.
293  *
294  * In order to get useful information from this Data organization, a set of
295  * interface routines are provided (TBD). The important thing to remember while
296  * manipulating the structures, is that, the NODE number information should
297  * be used. If the NODE is non-zero (remote) then each offset should
298  * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
299  * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
300  *
301  * Note that these structures do not provide much info about connectivity.
302  * That info will be part of HWGRAPH, which is an extension of the cfg_t
303  * data structure. (ref IP27prom/cfg.h) It has to be extended to include
304  * the IO part of the Network(TBD).
305  *
306  * The data structures below define the above concepts.
307  */
308 
309 /*
310  * Values for CPU types
311  */
312 #define KL_CPU_R4000		0x1	/* Standard R4000 */
313 #define KL_CPU_TFP		0x2	/* TFP processor */
314 #define KL_CPU_R10000		0x3	/* R10000 (T5) */
315 #define KL_CPU_NONE		(-1)	/* no cpu present in slot */
316 
317 /*
318  * IP27 BOARD classes
319  */
320 
321 #define KLCLASS_MASK	0xf0
322 #define KLCLASS_NONE	0x00
323 #define KLCLASS_NODE	0x10		 /* CPU, Memory and HUB board */
324 #define KLCLASS_CPU	KLCLASS_NODE
325 #define KLCLASS_IO	0x20		 /* BaseIO, 4 ch SCSI, ethernet, FDDI
326 					    and the non-graphics widget boards */
327 #define KLCLASS_ROUTER	0x30		 /* Router board */
328 #define KLCLASS_MIDPLANE 0x40		 /* We need to treat this as a board
329 					    so that we can record error info */
330 #define KLCLASS_GFX	0x50		/* graphics boards */
331 
332 #define KLCLASS_PSEUDO_GFX	0x60	/* HDTV type cards that use a gfx
333 					 * hw ifc to xtalk and are not gfx
334 					 * class for sw purposes */
335 
336 #define KLCLASS_MAX	7		/* Bump this if a new CLASS is added */
337 #define KLTYPE_MAX	10		/* Bump this if a new CLASS is added */
338 
339 #define KLCLASS_UNKNOWN 0xf0
340 
341 #define KLCLASS(_x) ((_x) & KLCLASS_MASK)
342 
343 /*
344  * IP27 board types
345  */
346 
347 #define KLTYPE_MASK	0x0f
348 #define KLTYPE_NONE	0x00
349 #define KLTYPE_EMPTY	0x00
350 
351 #define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0)
352 #define KLTYPE_IP27	(KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */
353 
354 #define KLTYPE_WEIRDIO	(KLCLASS_IO  | 0x0)
355 #define KLTYPE_BASEIO	(KLCLASS_IO  | 0x1) /* IOC3, SuperIO, Bridge, SCSI */
356 #define KLTYPE_IO6	KLTYPE_BASEIO	    /* Additional name */
357 #define KLTYPE_4CHSCSI	(KLCLASS_IO  | 0x2)
358 #define KLTYPE_MSCSI	KLTYPE_4CHSCSI	    /* Additional name */
359 #define KLTYPE_ETHERNET (KLCLASS_IO  | 0x3)
360 #define KLTYPE_MENET	KLTYPE_ETHERNET	    /* Additional name */
361 #define KLTYPE_FDDI	(KLCLASS_IO  | 0x4)
362 #define KLTYPE_UNUSED	(KLCLASS_IO  | 0x5) /* XXX UNUSED */
363 #define KLTYPE_HAROLD	(KLCLASS_IO  | 0x6) /* PCI SHOE BOX */
364 #define KLTYPE_PCI	KLTYPE_HAROLD
365 #define KLTYPE_VME	(KLCLASS_IO  | 0x7) /* Any 3rd party VME card */
366 #define KLTYPE_MIO	(KLCLASS_IO  | 0x8)
367 #define KLTYPE_FC	(KLCLASS_IO  | 0x9)
368 #define KLTYPE_LINC	(KLCLASS_IO  | 0xA)
369 #define KLTYPE_TPU	(KLCLASS_IO  | 0xB) /* Tensor Processing Unit */
370 #define KLTYPE_GSN_A	(KLCLASS_IO  | 0xC) /* Main GSN board */
371 #define KLTYPE_GSN_B	(KLCLASS_IO  | 0xD) /* Auxiliary GSN board */
372 
373 #define KLTYPE_GFX	(KLCLASS_GFX | 0x0) /* unknown graphics type */
374 #define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */
375 #define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */
376 
377 #define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0)
378 #define KLTYPE_ROUTER	  (KLCLASS_ROUTER | 0x1)
379 #define KLTYPE_ROUTER2	  KLTYPE_ROUTER		/* Obsolete! */
380 #define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2)
381 #define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
382 
383 #define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0)
384 #define KLTYPE_MIDPLANE8  (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */
385 #define KLTYPE_MIDPLANE	   KLTYPE_MIDPLANE8
386 #define KLTYPE_PBRICK_XBOW	(KLCLASS_MIDPLANE | 0x2)
387 
388 #define KLTYPE_IOBRICK		(KLCLASS_IOBRICK | 0x0)
389 #define KLTYPE_IBRICK		(KLCLASS_IOBRICK | 0x1)
390 #define KLTYPE_PBRICK		(KLCLASS_IOBRICK | 0x2)
391 #define KLTYPE_XBRICK		(KLCLASS_IOBRICK | 0x3)
392 
393 #define KLTYPE_PBRICK_BRIDGE	KLTYPE_PBRICK
394 
395 /* The value of type should be more than 8 so that hinv prints
396  * out the board name from the NIC string. For values less than
397  * 8 the name of the board needs to be hard coded in a few places.
398  * When bringup started nic names had not standardized and so we
399  * had to hard code. (For people interested in history.)
400  */
401 #define KLTYPE_XTHD	(KLCLASS_PSEUDO_GFX | 0x9)
402 
403 #define KLTYPE_UNKNOWN	(KLCLASS_UNKNOWN | 0xf)
404 
405 #define KLTYPE(_x)	((_x) & KLTYPE_MASK)
406 #define IS_MIO_PRESENT(l)	((l->brd_type == KLTYPE_BASEIO) && \
407 				 (l->brd_flags & SECOND_NIC_PRESENT))
408 #define IS_MIO_IOC3(l, n)	(IS_MIO_PRESENT(l) && (n > 2))
409 
410 /*
411  * board structures
412  */
413 
414 #define MAX_COMPTS_PER_BRD 24
415 
416 #define LOCAL_BOARD 1
417 #define REMOTE_BOARD 2
418 
419 #define LBOARD_STRUCT_VERSION	2
420 
421 typedef struct lboard_s {
422 	klconf_off_t	brd_next;	  /* Next BOARD */
423 	unsigned char	struct_type;	  /* type of structure, local or remote */
424 	unsigned char	brd_type;	  /* type+class */
425 	unsigned char	brd_sversion;	  /* version of this structure */
426 	unsigned char	brd_brevision;	  /* board revision */
427 	unsigned char	brd_promver;	  /* board prom version, if any */
428 	unsigned char	brd_flags;	  /* Enabled, Disabled etc */
429 	unsigned char	brd_slot;	  /* slot number */
430 	unsigned short	brd_debugsw;	  /* Debug switches */
431 	moduleid_t	brd_module;	  /* module to which it belongs */
432 	partid_t	brd_partition;	  /* Partition number */
433 	unsigned short	brd_diagval;	  /* diagnostic value */
434 	unsigned short	brd_diagparm;	  /* diagnostic parameter */
435 	unsigned char	brd_inventory;	  /* inventory history */
436 	unsigned char	brd_numcompts;	  /* Number of components */
437 	nic_t		brd_nic;	  /* Number in CAN */
438 	nasid_t		brd_nasid;	  /* passed parameter */
439 	klconf_off_t	brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
440 	klconf_off_t	brd_errinfo;	  /* Board's error information */
441 	struct lboard_s *brd_parent;	  /* Logical parent for this brd */
442 	vertex_hdl_t	brd_graph_link;	  /* vertex hdl to connect extern compts */
443 	confidence_t	brd_confidence;	  /* confidence that the board is bad */
444 	nasid_t		brd_owner;	  /* who owns this board */
445 	unsigned char	brd_nic_flags;	  /* To handle 8 more NICs */
446 	char		brd_name[32];
447 } lboard_t;
448 
449 
450 /*
451  *	Make sure we pass back the calias space address for local boards.
452  *	klconfig board traversal and error structure extraction defines.
453  */
454 
455 #define BOARD_SLOT(_brd)	((_brd)->brd_slot)
456 
457 #define KLCF_CLASS(_brd)	KLCLASS((_brd)->brd_type)
458 #define KLCF_TYPE(_brd)		KLTYPE((_brd)->brd_type)
459 #define KLCF_REMOTE(_brd)	(((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1)
460 #define KLCF_NUM_COMPS(_brd)	((_brd)->brd_numcompts)
461 #define KLCF_MODULE_ID(_brd)	((_brd)->brd_module)
462 
463 #define KLCF_NEXT(_brd)		\
464 	((_brd)->brd_next ?	\
465 	 (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\
466 	 NULL)
467 #define KLCF_COMP(_brd, _ndx)	\
468 		(klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \
469 					       (_brd)->brd_compts[(_ndx)]))
470 
471 #define KLCF_COMP_ERROR(_brd, _comp)	\
472 	       (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo))
473 
474 #define KLCF_COMP_TYPE(_comp)	((_comp)->struct_type)
475 #define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid)	/* Widget ID */
476 
477 
478 
479 /*
480  * Generic info structure. This stores common info about a
481  * component.
482  */
483 
484 typedef struct klinfo_s {		   /* Generic info */
485 	unsigned char	struct_type;	   /* type of this structure */
486 	unsigned char	struct_version;	   /* version of this structure */
487 	unsigned char	flags;		  /* Enabled, disabled etc */
488 	unsigned char	revision;	  /* component revision */
489 	unsigned short	diagval;	  /* result of diagnostics */
490 	unsigned short	diagparm;	  /* diagnostic parameter */
491 	unsigned char	inventory;	  /* previous inventory status */
492 	nic_t		nic;		  /* MUst be aligned properly */
493 	unsigned char	physid;		  /* physical id of component */
494 	unsigned int	virtid;		  /* virtual id as seen by system */
495 	unsigned char	widid;		  /* Widget id - if applicable */
496 	nasid_t		nasid;		  /* node number - from parent */
497 	char		pad1;		  /* pad out structure. */
498 	char		pad2;		  /* pad out structure. */
499 	COMPONENT	*arcs_compt;	  /* ptr to the arcs struct for ease*/
500 	klconf_off_t	errinfo;	  /* component specific errors */
501 	unsigned short	pad3;		  /* pci fields have moved over to */
502 	unsigned short	pad4;		  /* klbri_t */
503 } klinfo_t ;
504 
505 #define KLCONFIG_INFO_ENABLED(_i)	((_i)->flags & KLINFO_ENABLE)
506 /*
507  * Component structures.
508  * Following are the currently identified components:
509  *	CPU, HUB, MEM_BANK,
510  *	XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE)
511  *	BRIDGE, IOC3, SuperIO, SCSI, FDDI
512  *	ROUTER
513  *	GRAPHICS
514  */
515 #define KLSTRUCT_UNKNOWN	0
516 #define KLSTRUCT_CPU		1
517 #define KLSTRUCT_HUB		2
518 #define KLSTRUCT_MEMBNK		3
519 #define KLSTRUCT_XBOW		4
520 #define KLSTRUCT_BRI		5
521 #define KLSTRUCT_IOC3		6
522 #define KLSTRUCT_PCI		7
523 #define KLSTRUCT_VME		8
524 #define KLSTRUCT_ROU		9
525 #define KLSTRUCT_GFX		10
526 #define KLSTRUCT_SCSI		11
527 #define KLSTRUCT_FDDI		12
528 #define KLSTRUCT_MIO		13
529 #define KLSTRUCT_DISK		14
530 #define KLSTRUCT_TAPE		15
531 #define KLSTRUCT_CDROM		16
532 #define KLSTRUCT_HUB_UART	17
533 #define KLSTRUCT_IOC3ENET	18
534 #define KLSTRUCT_IOC3UART	19
535 #define KLSTRUCT_UNUSED		20 /* XXX UNUSED */
536 #define KLSTRUCT_IOC3PCKM	21
537 #define KLSTRUCT_RAD		22
538 #define KLSTRUCT_HUB_TTY	23
539 #define KLSTRUCT_IOC3_TTY	24
540 
541 /* Early Access IO proms are compatible
542    only with KLSTRUCT values up to 24. */
543 
544 #define KLSTRUCT_FIBERCHANNEL	25
545 #define KLSTRUCT_MOD_SERIAL_NUM 26
546 #define KLSTRUCT_IOC3MS		27
547 #define KLSTRUCT_TPU		28
548 #define KLSTRUCT_GSN_A		29
549 #define KLSTRUCT_GSN_B		30
550 #define KLSTRUCT_XTHD		31
551 
552 /*
553  * These are the indices of various components within a lboard structure.
554  */
555 
556 #define IP27_CPU0_INDEX 0
557 #define IP27_CPU1_INDEX 1
558 #define IP27_HUB_INDEX 2
559 #define IP27_MEM_INDEX 3
560 
561 #define BASEIO_BRIDGE_INDEX 0
562 #define BASEIO_IOC3_INDEX 1
563 #define BASEIO_SCSI1_INDEX 2
564 #define BASEIO_SCSI2_INDEX 3
565 
566 #define MIDPLANE_XBOW_INDEX 0
567 #define ROUTER_COMPONENT_INDEX 0
568 
569 #define CH4SCSI_BRIDGE_INDEX 0
570 
571 /* Info holders for various hardware components */
572 
573 typedef u64 *pci_t;
574 typedef u64 *vmeb_t;
575 typedef u64 *vmed_t;
576 typedef u64 *fddi_t;
577 typedef u64 *scsi_t;
578 typedef u64 *mio_t;
579 typedef u64 *graphics_t;
580 typedef u64 *router_t;
581 
582 /*
583  * The port info in ip27_cfg area translates to a lboart_t in the
584  * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t
585  * is stored in terms of a nasid and a offset from start of KLCONFIG
586  * area	 on that nasid.
587  */
588 typedef struct klport_s {
589 	nasid_t		port_nasid;
590 	unsigned char	port_flag;
591 	klconf_off_t	port_offset;
592 } klport_t;
593 
594 typedef struct klcpu_s {			  /* CPU */
595 	klinfo_t	cpu_info;
596 	unsigned short	cpu_prid;	/* Processor PRID value */
597 	unsigned short	cpu_fpirr;	/* FPU IRR value */
598 	unsigned short	cpu_speed;	/* Speed in MHZ */
599 	unsigned short	cpu_scachesz;	/* secondary cache size in MB */
600 	unsigned short	cpu_scachespeed;/* secondary cache speed in MHz */
601 } klcpu_t ;
602 
603 #define CPU_STRUCT_VERSION   2
604 
605 typedef struct klhub_s {			/* HUB */
606 	klinfo_t	hub_info;
607 	unsigned int		hub_flags;		/* PCFG_HUB_xxx flags */
608 	klport_t	hub_port;		/* hub is connected to this */
609 	nic_t		hub_box_nic;		/* nic of containing box */
610 	klconf_off_t	hub_mfg_nic;		/* MFG NIC string */
611 	u64		hub_speed;		/* Speed of hub in HZ */
612 } klhub_t ;
613 
614 typedef struct klhub_uart_s {			/* HUB */
615 	klinfo_t	hubuart_info;
616 	unsigned int		hubuart_flags;		/* PCFG_HUB_xxx flags */
617 	nic_t		hubuart_box_nic;	/* nic of containing box */
618 } klhub_uart_t ;
619 
620 #define MEMORY_STRUCT_VERSION	2
621 
622 typedef struct klmembnk_s {			/* MEMORY BANK */
623 	klinfo_t	membnk_info;
624 	short		membnk_memsz;		/* Total memory in megabytes */
625 	short		membnk_dimm_select; /* bank to physical addr mapping*/
626 	short		membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */
627 	short		membnk_attr;
628 } klmembnk_t ;
629 
630 #define KLCONFIG_MEMBNK_SIZE(_info, _bank)	\
631 			    ((_info)->membnk_bnksz[(_bank)])
632 
633 
634 #define MEMBNK_PREMIUM 1
635 #define KLCONFIG_MEMBNK_PREMIUM(_info, _bank)	\
636 			    ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank)))
637 
638 #define MAX_SERIAL_NUM_SIZE 10
639 
640 typedef struct klmod_serial_num_s {
641       klinfo_t	      snum_info;
642       union {
643 	      char snum_str[MAX_SERIAL_NUM_SIZE];
644 	      unsigned long long       snum_int;
645       } snum;
646 } klmod_serial_num_t;
647 
648 /* Macros needed to access serial number structure in lboard_t.
649    Hard coded values are necessary since we cannot treat
650    serial number struct as a component without losing compatibility
651    between prom versions. */
652 
653 #define GET_SNUM_COMP(_l)	((klmod_serial_num_t *)\
654 				KLCF_COMP(_l, _l->brd_numcompts))
655 
656 #define MAX_XBOW_LINKS 16
657 
658 typedef struct klxbow_s {			   /* XBOW */
659 	klinfo_t	xbow_info ;
660 	klport_t	xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */
661 	int		xbow_master_hub_link;
662 	/* type of brd connected+component struct ptr+flags */
663 } klxbow_t ;
664 
665 #define MAX_PCI_SLOTS 8
666 
667 typedef struct klpci_device_s {
668 	s32	pci_device_id;	/* 32 bits of vendor/device ID. */
669 	s32	pci_device_pad; /* 32 bits of padding. */
670 } klpci_device_t;
671 
672 #define BRIDGE_STRUCT_VERSION	2
673 
674 typedef struct klbri_s {			  /* BRIDGE */
675 	klinfo_t	bri_info ;
676 	unsigned char	bri_eprominfo ;	   /* IO6prom connected to bridge */
677 	unsigned char	bri_bustype ;	   /* PCI/VME BUS bridge/GIO */
678 	pci_t		pci_specific  ;	   /* PCI Board config info */
679 	klpci_device_t	bri_devices[MAX_PCI_DEVS] ;	/* PCI IDs */
680 	klconf_off_t	bri_mfg_nic ;
681 } klbri_t ;
682 
683 #define MAX_IOC3_TTY	2
684 
685 typedef struct klioc3_s {			   /* IOC3 */
686 	klinfo_t	ioc3_info ;
687 	unsigned char	ioc3_ssram ;	    /* Info about ssram */
688 	unsigned char	ioc3_nvram ;	    /* Info about nvram */
689 	klinfo_t	ioc3_superio ;	    /* Info about superio */
690 	klconf_off_t	ioc3_tty_off ;
691 	klinfo_t	ioc3_enet ;
692 	klconf_off_t	ioc3_enet_off ;
693 	klconf_off_t	ioc3_kbd_off ;
694 } klioc3_t ;
695 
696 #define MAX_VME_SLOTS 8
697 
698 typedef struct klvmeb_s {			   /* VME BRIDGE - PCI CTLR */
699 	klinfo_t	vmeb_info ;
700 	vmeb_t		vmeb_specific ;
701 	klconf_off_t	vmeb_brdinfo[MAX_VME_SLOTS]   ;	   /* VME Board config info */
702 } klvmeb_t ;
703 
704 typedef struct klvmed_s {			   /* VME DEVICE - VME BOARD */
705 	klinfo_t	vmed_info ;
706 	vmed_t		vmed_specific ;
707 	klconf_off_t	vmed_brdinfo[MAX_VME_SLOTS]   ;	   /* VME Board config info */
708 } klvmed_t ;
709 
710 #define ROUTER_VECTOR_VERS	2
711 
712 /* XXX - Don't we need the number of ports here?!? */
713 typedef struct klrou_s {			  /* ROUTER */
714 	klinfo_t	rou_info ;
715 	unsigned int		rou_flags ;	      /* PCFG_ROUTER_xxx flags */
716 	nic_t		rou_box_nic ;	      /* nic of the containing module */
717 	klport_t	rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */
718 	klconf_off_t	rou_mfg_nic ;	  /* MFG NIC string */
719 	u64	rou_vector;	  /* vector from master node */
720 } klrou_t ;
721 
722 /*
723  *  Graphics Controller/Device
724  *
725  *  (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier
726  *  used a couple different structures to store graphics information.
727  *  For compatibility reasons, the newer data structure preserves some
728  *  of the layout so that fields that are used in the old versions remain
729  *  in the same place (with the same info).  Determination of what version
730  *  of this structure we have is done by checking the cookie field.
731  */
732 #define KLGFX_COOKIE	0x0c0de000
733 
734 typedef struct klgfx_s {		/* GRAPHICS Device */
735 	klinfo_t	gfx_info;
736 	klconf_off_t	old_gndevs;	/* for compatibility with older proms */
737 	klconf_off_t	old_gdoff0;	/* for compatibility with older proms */
738 	unsigned int		cookie;		/* for compatibility with older proms */
739 	unsigned int		moduleslot;
740 	struct klgfx_s	*gfx_next_pipe;
741 	graphics_t	gfx_specific;
742 	klconf_off_t	pad0;		/* for compatibility with older proms */
743 	klconf_off_t	gfx_mfg_nic;
744 } klgfx_t;
745 
746 typedef struct klxthd_s {
747 	klinfo_t	xthd_info ;
748 	klconf_off_t	xthd_mfg_nic ;	      /* MFG NIC string */
749 } klxthd_t ;
750 
751 typedef struct kltpu_s {		     /* TPU board */
752 	klinfo_t	tpu_info ;
753 	klconf_off_t	tpu_mfg_nic ;	     /* MFG NIC string */
754 } kltpu_t ;
755 
756 typedef struct klgsn_s {		     /* GSN board */
757 	klinfo_t	gsn_info ;
758 	klconf_off_t	gsn_mfg_nic ;	     /* MFG NIC string */
759 } klgsn_t ;
760 
761 #define MAX_SCSI_DEVS 16
762 
763 /*
764  * NOTE: THis is the max sized kl* structure and is used in klmalloc.c
765  * to allocate space of type COMPONENT. Make sure that if the size of
766  * any other component struct becomes more than this, then redefine
767  * that as the size to be klmalloced.
768  */
769 
770 typedef struct klscsi_s {			   /* SCSI Controller */
771 	klinfo_t	scsi_info ;
772 	scsi_t		scsi_specific	;
773 	unsigned char	scsi_numdevs ;
774 	klconf_off_t	scsi_devinfo[MAX_SCSI_DEVS] ;
775 } klscsi_t ;
776 
777 typedef struct klscdev_s {			    /* SCSI device */
778 	klinfo_t	scdev_info ;
779 	struct scsidisk_data *scdev_cfg ; /* driver fills up this */
780 } klscdev_t ;
781 
782 typedef struct klttydev_s {			     /* TTY device */
783 	klinfo_t	ttydev_info ;
784 	struct terminal_data *ttydev_cfg ; /* driver fills up this */
785 } klttydev_t ;
786 
787 typedef struct klenetdev_s {			      /* ENET device */
788 	klinfo_t	enetdev_info ;
789 	struct net_data *enetdev_cfg ; /* driver fills up this */
790 } klenetdev_t ;
791 
792 typedef struct klkbddev_s {			     /* KBD device */
793 	klinfo_t	kbddev_info ;
794 	struct keyboard_data *kbddev_cfg ; /* driver fills up this */
795 } klkbddev_t ;
796 
797 typedef struct klmsdev_s {			    /* mouse device */
798 	klinfo_t	msdev_info ;
799 	void		*msdev_cfg ;
800 } klmsdev_t ;
801 
802 #define MAX_FDDI_DEVS 10 /* XXX Is this true */
803 
804 typedef struct klfddi_s {			   /* FDDI */
805 	klinfo_t	fddi_info ;
806 	fddi_t		fddi_specific ;
807 	klconf_off_t	fddi_devinfo[MAX_FDDI_DEVS] ;
808 } klfddi_t ;
809 
810 typedef struct klmio_s {			  /* MIO */
811 	klinfo_t	mio_info ;
812 	mio_t		mio_specific   ;
813 } klmio_t ;
814 
815 
816 typedef union klcomp_s {
817 	klcpu_t		kc_cpu;
818 	klhub_t		kc_hub;
819 	klmembnk_t	kc_mem;
820 	klxbow_t	kc_xbow;
821 	klbri_t		kc_bri;
822 	klioc3_t	kc_ioc3;
823 	klvmeb_t	kc_vmeb;
824 	klvmed_t	kc_vmed;
825 	klrou_t		kc_rou;
826 	klgfx_t		kc_gfx;
827 	klscsi_t	kc_scsi;
828 	klscdev_t	kc_scsi_dev;
829 	klfddi_t	kc_fddi;
830 	klmio_t		kc_mio;
831 	klmod_serial_num_t kc_snum ;
832 } klcomp_t;
833 
834 typedef union kldev_s {	     /* for device structure allocation */
835 	klscdev_t	kc_scsi_dev ;
836 	klttydev_t	kc_tty_dev ;
837 	klenetdev_t	kc_enet_dev ;
838 	klkbddev_t	kc_kbd_dev ;
839 } kldev_t ;
840 
841 /* Data structure interface routines. TBD */
842 
843 /* Include launch info in this file itself? TBD */
844 
845 /*
846  * TBD - Can the ARCS and device driver related info also be included in the
847  * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t
848  * structure, viz private to the IO4prom.
849  */
850 
851 /*
852  * TBD - Allocation issues.
853  *
854  * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component,
855  * errinfo and allocate from them, or have a single heap and allocate all
856  * structures from it. Debug is easier in the former method since we can
857  * dump all similar structs in one command, but there will be lots of holes,
858  * in memory and max limits are needed for number of structures.
859  * Another way to make it organized, is to have a union of all components
860  * and allocate a aligned chunk of memory greater than the biggest
861  * component.
862  */
863 
864 typedef union {
865 	lboard_t *lbinfo ;
866 } biptr_t ;
867 
868 
869 #define BRI_PER_XBOW 6
870 #define PCI_PER_BRI  8
871 #define DEV_PER_PCI  16
872 
873 
874 /* Virtual dipswitch values (starting from switch "7"): */
875 
876 #define VDS_NOGFX		0x8000	/* Don't enable gfx and autoboot */
877 #define VDS_NOMP		0x100	/* Don't start slave processors */
878 #define VDS_MANUMODE		0x80	/* Manufacturing mode */
879 #define VDS_NOARB		0x40	/* No bootmaster arbitration */
880 #define VDS_PODMODE		0x20	/* Go straight to POD mode */
881 #define VDS_NO_DIAGS		0x10	/* Don't run any diags after BM arb */
882 #define VDS_DEFAULTS		0x08	/* Use default environment values */
883 #define VDS_NOMEMCLEAR		0x04	/* Don't run mem cfg code */
884 #define VDS_2ND_IO4		0x02	/* Boot from the second IO4 */
885 #define VDS_DEBUG_PROM		0x01	/* Print PROM debugging messages */
886 
887 /* external declarations of Linux kernel functions. */
888 
889 extern lboard_t *find_lboard(lboard_t *start, unsigned char type);
890 extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
891 extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
892 extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class);
893 
894 #endif /* _ASM_SN_KLCONFIG_H */
895