Searched refs:HZ_PER_MHZ (Results 1 – 25 of 29) sorted by relevance
12
25 #define ADF_C62X_AE_FREQ (685 * HZ_PER_MHZ)26 #define ADF_C62X_MIN_AE_FREQ (533 * HZ_PER_MHZ)27 #define ADF_C62X_MAX_AE_FREQ (800 * HZ_PER_MHZ)
25 #define ADF_C3XXX_AE_FREQ (685 * HZ_PER_MHZ)26 #define ADF_C3XXX_MIN_AE_FREQ (533 * HZ_PER_MHZ)27 #define ADF_C3XXX_MAX_AE_FREQ (685 * HZ_PER_MHZ)
21 #define PLL_FREF_MAX_FREQ (200 * HZ_PER_MHZ)22 #define PLL_FREF_MIN_FREQ (1 * HZ_PER_MHZ)23 #define PLL_FREF_M_MAX_FREQ (40 * HZ_PER_MHZ)24 #define PLL_FREF_M_MIN_FREQ (10 * HZ_PER_MHZ)25 #define PLL_FCLK_MAX_FREQ (2400 * HZ_PER_MHZ)26 #define PLL_FCLK_MIN_FREQ (600 * HZ_PER_MHZ)27 #define PLL_FCLKO_MAX_FREQ (2400 * HZ_PER_MHZ)
376 #define ADF4377_MAX_VCO_FREQ (12800ULL * HZ_PER_MHZ)377 #define ADF4377_MIN_VCO_FREQ (6400ULL * HZ_PER_MHZ)378 #define ADF4377_MAX_REFIN_FREQ (1000 * HZ_PER_MHZ)379 #define ADF4377_MIN_REFIN_FREQ (10 * HZ_PER_MHZ)380 #define ADF4377_MAX_FREQ_PFD (500 * HZ_PER_MHZ)381 #define ADF4377_MIN_FREQ_PFD (3 * HZ_PER_MHZ)384 #define ADF4377_FREQ_PFD_80MHZ (80 * HZ_PER_MHZ)385 #define ADF4377_FREQ_PFD_125MHZ (125 * HZ_PER_MHZ)386 #define ADF4377_FREQ_PFD_160MHZ (160 * HZ_PER_MHZ)387 #define ADF4377_FREQ_PFD_250MHZ (250 * HZ_PER_MHZ)[all …]
331 if (rate >= (5400 * HZ_PER_MHZ) && rate <= (7000 * HZ_PER_MHZ)) in admv1013_update_quad_filters()333 else if (rate >= (5400 * HZ_PER_MHZ) && rate <= (8000 * HZ_PER_MHZ)) in admv1013_update_quad_filters()335 else if (rate >= (6600 * HZ_PER_MHZ) && rate <= (9200 * HZ_PER_MHZ)) in admv1013_update_quad_filters()
225 if (rate >= (5400 * HZ_PER_MHZ) && rate <= (7000 * HZ_PER_MHZ)) in admv1014_update_quad_filters()227 else if (rate > (7000 * HZ_PER_MHZ) && rate <= (8000 * HZ_PER_MHZ)) in admv1014_update_quad_filters()229 else if (rate > (8000 * HZ_PER_MHZ) && rate <= (9200 * HZ_PER_MHZ)) in admv1014_update_quad_filters()
125 #define TSC_ADC_CLK (3 * HZ_PER_MHZ)126 #define MAG_ADC_CLK (13 * HZ_PER_MHZ)
36 #define ADF_DH895X_AE_FREQ (933 * HZ_PER_MHZ)
69 #define ADF_4XXX_KPT_COUNTER_FREQ (100 * HZ_PER_MHZ)
495 hs_byte_clk /= HZ_PER_MHZ; in tc358746_apply_dphy_config()820 if (fout > 1000 * HZ_PER_MHZ) { in tc358746_find_pll_settings()825 if (fout >= 500 * HZ_PER_MHZ) in tc358746_find_pll_settings()827 else if (fout >= 250 * HZ_PER_MHZ) in tc358746_find_pll_settings()829 else if (fout >= 125 * HZ_PER_MHZ) in tc358746_find_pll_settings()839 if (fin < 4 * HZ_PER_MHZ || fin > 40 * HZ_PER_MHZ) in tc358746_find_pll_settings()1523 if (refclk < 6 * HZ_PER_MHZ || refclk > 40 * HZ_PER_MHZ) in tc358746_probe()
470 if (freq / *prediv < 12 * HZ_PER_MHZ) in compute_pll_parameters_by_freq()479 *mult = ((804 * HZ_PER_MHZ) * (*prediv) + freq / 2) / freq; in compute_pll_parameters_by_freq()1841 if (sensor->clk_freq < 6 * HZ_PER_MHZ || in vgxy61_probe()1842 sensor->clk_freq > 27 * HZ_PER_MHZ) { in vgxy61_probe()1844 sensor->clk_freq / HZ_PER_MHZ); in vgxy61_probe()
68 #define OV02A10_LINK_FREQ_390MHZ (390 * HZ_PER_MHZ)69 #define OV02A10_ECLK_FREQ (24 * HZ_PER_MHZ)
28 #define HZ_PER_MHZ 1000000UL macro
91 *frequency = temp * (HZ_PER_MHZ / 10); in measure_clock()
19 #define REF_CLOCK_24MHz (24 * HZ_PER_MHZ)20 #define REF_CLOCK_25MHz (25 * HZ_PER_MHZ)21 #define REF_CLOCK_100MHz (100 * HZ_PER_MHZ)
223 ddata->spi_padding_bytes = 1 + (spi->max_speed_hz / HZ_PER_MHZ + 2) / 8; in ocelot_spi_probe()
157 if (freq >= 12000 * HZ_PER_MHZ && freq <= 12500 * HZ_PER_MHZ) { in __admv8818_hpf_select()
22 #define CS42L43_SPI_ROOT_HZ (40 * HZ_PER_MHZ)
83 #define CSI_MAX_SPI_SCKO (8 * HZ_PER_MHZ)
59 #define LS2X_I2C_PCLK_FREQ (50 * HZ_PER_MHZ)
272 div_s64(ts_coeff->j * (s64)pvt->ip_freq, HZ_PER_MHZ); in pvt_calc_temp()402 sys_freq = clk_get_rate(pvt->clk) / HZ_PER_MHZ; in pvt_init()
210 value = val1 * HZ_PER_MHZ + val2; in hid_sensor_write_samp_freq_value()
201 unsigned int rate = clk_get_rate(ctrl->clk) / HZ_PER_MHZ; in ebu_nand_set_timings()
366 unsigned long vclk_rate = csi2->vclk_rate / HZ_PER_MHZ; in rzg2l_csi2_mipi_link_enable()
219 fvco = (unsigned long long)PLL_FVCO_MHZ * HZ_PER_MHZ; in stm32_usbphyc_get_pll_params()