| /linux-6.6.21/drivers/regulator/ |
| D | lp8788-buck.c | 82 BUCK1, enumerator
152 case BUCK1: in lp8788_set_dvs()
169 case BUCK1: in lp8788_get_buck_dvs_ctrl_mode()
211 case BUCK1: in lp8788_select_buck_vout_addr()
370 .id = BUCK1,
432 case BUCK1: in lp8788_dvs_gpio_request()
474 if ((id == BUCK1 && !pdata->buck1_dvs) || in lp8788_init_dvs()
|
| D | tps65086-regulator.c | 17 enum tps65086_regulators { BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, LDOA1, enumerator
138 TPS65086_REGULATOR("BUCK1", "buck1", BUCK1, 0x80, TPS65086_BUCK1CTRL,
178 TPS65086_REGULATOR("BUCK1", "buck1", BUCK1, 0x80, TPS65086_BUCK1CTRL,
217 TPS65086_REGULATOR("BUCK1", "buck1", BUCK1, 0x80, TPS65086_BUCK1CTRL,
256 TPS65086_REGULATOR("BUCK1", "buck1", BUCK1, 0x80, TPS65086_BUCK1CTRL,
313 case BUCK1: in tps65086_of_parse_cb()
|
| D | mcp16502.c | 135 BUCK1 = 0, enumerator
304 case BUCK1: in mcp16502_set_voltage_time_sel()
471 MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops,
|
| /linux-6.6.21/Documentation/devicetree/bindings/regulator/ |
| D | pv88090.txt | 11 BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
25 BUCK1 {
|
| D | pv88080.txt | 17 BUCK1, BUCK2, BUCK3 and HVBUCK.
31 BUCK1 {
|
| D | lp872x.txt | 20 bit[2]: BUCK1 output voltage control by external DVS pin or register
23 bit[0]: BUCK1 enable control, 1 = enable, 0 = disable
101 /* Enable BUCK1,2, no DVS, normal LDO mode, timestep is 256usec */
|
| D | nxp,pca9450-regulator.yaml | 21 # BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
118 buck1: BUCK1 {
119 regulator-name = "BUCK1";
|
| D | pv88060.txt | 11 BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
26 BUCK1 {
|
| D | 88pm860x.txt | 17 BUCK1 {
|
| D | dlg,da9121.yaml | 158 regulator-name = "BUCK1";
189 regulator-name = "BUCK1";
|
| /linux-6.6.21/Documentation/devicetree/bindings/mfd/ |
| D | da9055.txt | 33 buck1 : regulator BUCK1
57 buck1: BUCK1 {
|
| D | samsung,s2mps11.yaml | 173 BUCK1 {
253 BUCK1 {
|
| D | samsung,s2mpa01.yaml | 71 buck1_reg: BUCK1 {
|
| D | max8998.txt | 68 - Example: BUCK1, BUCK2, BUCK3, BUCK4
111 buck1_reg: BUCK1 {
|
| D | ti,lp87565-q1.yaml | 37 Voltage regulator supply for BUCK0 and BUCK1 converters.
|
| /linux-6.6.21/arch/arm64/boot/dts/freescale/ |
| D | imx8mm-evkb.dts | 28 buck1_reg: BUCK1 {
29 regulator-name = "BUCK1";
|
| D | imx8mp-icore-mx8mp.dtsi | 43 buck1: BUCK1 {
48 regulator-name = "BUCK1";
|
| D | imx8mn-tqma8mqnl.dtsi | 97 buck1_reg: BUCK1 {
98 regulator-name = "BUCK1";
118 /* V_0V85_GPU / DRAM: shall be equal to BUCK1 for i.MX8MN */
|
| D | imx8mp-debix-som-a.dtsi | 56 buck1: BUCK1 {
57 regulator-name = "BUCK1";
|
| D | imx8mm-emtop-som.dtsi | 66 buck1: BUCK1 {
67 regulator-name = "BUCK1";
|
| D | imx8mp-tqma8mpql.dtsi | 83 buck1_reg: BUCK1 {
84 regulator-name = "BUCK1";
|
| D | imx8mp-phycore-som.dtsi | 99 buck1: BUCK1 {
104 regulator-name = "VDD_SOC (BUCK1)";
|
| D | imx8mm-kontron-sl.dtsi | 108 reg_vdd_soc: BUCK1 {
109 regulator-name = "+0V8_VDD_SOC (BUCK1)";
|
| D | imx8mm-kontron-osm-s.dtsi | 114 reg_vdd_soc: BUCK1 {
115 regulator-name = "+0V8_VDD_SOC (BUCK1)";
|
| D | imx8mn-ddr3l-evk.dts | 40 buck1: BUCK1 {
|