1 /*
2  * Copyright 2006-2007 Advanced Micro Devices, Inc.
3  *
4  * Permission is hereby granted, free of charge, to any person obtaining a
5  * copy of this software and associated documentation files (the "Software"),
6  * to deal in the Software without restriction, including without limitation
7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8  * and/or sell copies of the Software, and to permit persons to whom the
9  * Software is furnished to do so, subject to the following conditions:
10  *
11  * The above copyright notice and this permission notice shall be included in
12  * all copies or substantial portions of the Software.
13  *
14  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
17  * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18  * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20  * OTHER DEALINGS IN THE SOFTWARE.
21  */
22 
23 
24 /****************************************************************************/
25 /*Portion I: Definitions  shared between VBIOS and Driver                   */
26 /****************************************************************************/
27 
28 
29 #ifndef _ATOMBIOS_H
30 #define _ATOMBIOS_H
31 
32 #define ATOM_VERSION_MAJOR                   0x00020000
33 #define ATOM_VERSION_MINOR                   0x00000002
34 
35 #define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR)
36 
37 /* Endianness should be specified before inclusion,
38  * default to little endian
39  */
40 #ifndef ATOM_BIG_ENDIAN
41 #error Endian not specified
42 #endif
43 
44 #ifdef _H2INC
45   #ifndef ULONG
46     typedef unsigned long ULONG;
47   #endif
48 
49   #ifndef UCHAR
50     typedef unsigned char UCHAR;
51   #endif
52 
53   #ifndef USHORT
54     typedef unsigned short USHORT;
55   #endif
56 #endif
57 
58 #define ATOM_DAC_A            0
59 #define ATOM_DAC_B            1
60 #define ATOM_EXT_DAC          2
61 
62 #define ATOM_CRTC1            0
63 #define ATOM_CRTC2            1
64 #define ATOM_CRTC3            2
65 #define ATOM_CRTC4            3
66 #define ATOM_CRTC5            4
67 #define ATOM_CRTC6            5
68 #define ATOM_CRTC_INVALID     0xFF
69 
70 #define ATOM_DIGA             0
71 #define ATOM_DIGB             1
72 
73 #define ATOM_PPLL1            0
74 #define ATOM_PPLL2            1
75 #define ATOM_DCPLL            2
76 #define ATOM_PPLL0            2
77 #define ATOM_PPLL3            3
78 
79 #define ATOM_EXT_PLL1         8
80 #define ATOM_EXT_PLL2         9
81 #define ATOM_EXT_CLOCK        10
82 #define ATOM_PPLL_INVALID     0xFF
83 
84 #define ENCODER_REFCLK_SRC_P1PLL       0
85 #define ENCODER_REFCLK_SRC_P2PLL       1
86 #define ENCODER_REFCLK_SRC_DCPLL       2
87 #define ENCODER_REFCLK_SRC_EXTCLK      3
88 #define ENCODER_REFCLK_SRC_INVALID     0xFF
89 
90 #define ATOM_SCALER1          0
91 #define ATOM_SCALER2          1
92 
93 #define ATOM_SCALER_DISABLE   0
94 #define ATOM_SCALER_CENTER    1
95 #define ATOM_SCALER_EXPANSION 2
96 #define ATOM_SCALER_MULTI_EX  3
97 
98 #define ATOM_DISABLE          0
99 #define ATOM_ENABLE           1
100 #define ATOM_LCD_BLOFF                          (ATOM_DISABLE+2)
101 #define ATOM_LCD_BLON                           (ATOM_ENABLE+2)
102 #define ATOM_LCD_BL_BRIGHTNESS_CONTROL          (ATOM_ENABLE+3)
103 #define ATOM_LCD_SELFTEST_START									(ATOM_DISABLE+5)
104 #define ATOM_LCD_SELFTEST_STOP									(ATOM_ENABLE+5)
105 #define ATOM_ENCODER_INIT			                  (ATOM_DISABLE+7)
106 #define ATOM_INIT			                          (ATOM_DISABLE+7)
107 #define ATOM_GET_STATUS                         (ATOM_DISABLE+8)
108 
109 #define ATOM_BLANKING         1
110 #define ATOM_BLANKING_OFF     0
111 
112 #define ATOM_CURSOR1          0
113 #define ATOM_CURSOR2          1
114 
115 #define ATOM_ICON1            0
116 #define ATOM_ICON2            1
117 
118 #define ATOM_CRT1             0
119 #define ATOM_CRT2             1
120 
121 #define ATOM_TV_NTSC          1
122 #define ATOM_TV_NTSCJ         2
123 #define ATOM_TV_PAL           3
124 #define ATOM_TV_PALM          4
125 #define ATOM_TV_PALCN         5
126 #define ATOM_TV_PALN          6
127 #define ATOM_TV_PAL60         7
128 #define ATOM_TV_SECAM         8
129 #define ATOM_TV_CV            16
130 
131 #define ATOM_DAC1_PS2         1
132 #define ATOM_DAC1_CV          2
133 #define ATOM_DAC1_NTSC        3
134 #define ATOM_DAC1_PAL         4
135 
136 #define ATOM_DAC2_PS2         ATOM_DAC1_PS2
137 #define ATOM_DAC2_CV          ATOM_DAC1_CV
138 #define ATOM_DAC2_NTSC        ATOM_DAC1_NTSC
139 #define ATOM_DAC2_PAL         ATOM_DAC1_PAL
140 
141 #define ATOM_PM_ON            0
142 #define ATOM_PM_STANDBY       1
143 #define ATOM_PM_SUSPEND       2
144 #define ATOM_PM_OFF           3
145 
146 /* Bit0:{=0:single, =1:dual},
147    Bit1 {=0:666RGB, =1:888RGB},
148    Bit2:3:{Grey level}
149    Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}*/
150 
151 #define ATOM_PANEL_MISC_DUAL               0x00000001
152 #define ATOM_PANEL_MISC_888RGB             0x00000002
153 #define ATOM_PANEL_MISC_GREY_LEVEL         0x0000000C
154 #define ATOM_PANEL_MISC_FPDI               0x00000010
155 #define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT   2
156 #define ATOM_PANEL_MISC_SPATIAL            0x00000020
157 #define ATOM_PANEL_MISC_TEMPORAL           0x00000040
158 #define ATOM_PANEL_MISC_API_ENABLED        0x00000080
159 
160 
161 #define MEMTYPE_DDR1              "DDR1"
162 #define MEMTYPE_DDR2              "DDR2"
163 #define MEMTYPE_DDR3              "DDR3"
164 #define MEMTYPE_DDR4              "DDR4"
165 
166 #define ASIC_BUS_TYPE_PCI         "PCI"
167 #define ASIC_BUS_TYPE_AGP         "AGP"
168 #define ASIC_BUS_TYPE_PCIE        "PCI_EXPRESS"
169 
170 /* Maximum size of that FireGL flag string */
171 
172 #define ATOM_FIREGL_FLAG_STRING     "FGL"             //Flag used to enable FireGL Support
173 #define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING  3        //sizeof( ATOM_FIREGL_FLAG_STRING )
174 
175 #define ATOM_FAKE_DESKTOP_STRING    "DSK"             //Flag used to enable mobile ASIC on Desktop
176 #define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING  ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING
177 
178 #define ATOM_M54T_FLAG_STRING       "M54T"            //Flag used to enable M54T Support
179 #define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING    4        //sizeof( ATOM_M54T_FLAG_STRING )
180 
181 #define HW_ASSISTED_I2C_STATUS_FAILURE          2
182 #define HW_ASSISTED_I2C_STATUS_SUCCESS          1
183 
184 #pragma pack(1)                                       /* BIOS data must use byte alignment */
185 
186 /*  Define offset to location of ROM header. */
187 
188 #define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER		0x00000048L
189 #define OFFSET_TO_ATOM_ROM_IMAGE_SIZE				    0x00000002L
190 
191 #define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE    0x94
192 #define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE   20    /* including the terminator 0x0! */
193 #define	OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER		0x002f
194 #define	OFFSET_TO_GET_ATOMBIOS_STRINGS_START		0x006e
195 
196 /* Common header for all ROM Data tables.
197   Every table pointed  _ATOM_MASTER_DATA_TABLE has this common header.
198   And the pointer actually points to this header. */
199 
200 typedef struct _ATOM_COMMON_TABLE_HEADER
201 {
202   USHORT usStructureSize;
203   UCHAR  ucTableFormatRevision;   /*Change it when the Parser is not backward compatible */
204   UCHAR  ucTableContentRevision;  /*Change it only when the table needs to change but the firmware */
205                                   /*Image can't be updated, while Driver needs to carry the new table! */
206 }ATOM_COMMON_TABLE_HEADER;
207 
208 /****************************************************************************/
209 // Structure stores the ROM header.
210 /****************************************************************************/
211 typedef struct _ATOM_ROM_HEADER
212 {
213   ATOM_COMMON_TABLE_HEADER		sHeader;
214   UCHAR	 uaFirmWareSignature[4];    /*Signature to distinguish between Atombios and non-atombios,
215                                       atombios should init it as "ATOM", don't change the position */
216   USHORT usBiosRuntimeSegmentAddress;
217   USHORT usProtectedModeInfoOffset;
218   USHORT usConfigFilenameOffset;
219   USHORT usCRC_BlockOffset;
220   USHORT usBIOS_BootupMessageOffset;
221   USHORT usInt10Offset;
222   USHORT usPciBusDevInitCode;
223   USHORT usIoBaseAddress;
224   USHORT usSubsystemVendorID;
225   USHORT usSubsystemID;
226   USHORT usPCI_InfoOffset;
227   USHORT usMasterCommandTableOffset; /*Offset for SW to get all command table offsets, Don't change the position */
228   USHORT usMasterDataTableOffset;   /*Offset for SW to get all data table offsets, Don't change the position */
229   UCHAR  ucExtendedFunctionCode;
230   UCHAR  ucReserved;
231 }ATOM_ROM_HEADER;
232 
233 /*==============================Command Table Portion==================================== */
234 
235 #ifdef	UEFI_BUILD
236 	#define	UTEMP	USHORT
237 	#define	USHORT	void*
238 #endif
239 
240 /****************************************************************************/
241 // Structures used in Command.mtb
242 /****************************************************************************/
243 typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
244   USHORT ASIC_Init;                              //Function Table, used by various SW components,latest version 1.1
245   USHORT GetDisplaySurfaceSize;                  //Atomic Table,  Used by Bios when enabling HW ICON
246   USHORT ASIC_RegistersInit;                     //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
247   USHORT VRAM_BlockVenderDetection;              //Atomic Table,  used only by Bios
248   USHORT DIGxEncoderControl;										 //Only used by Bios
249   USHORT MemoryControllerInit;                   //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
250   USHORT EnableCRTCMemReq;                       //Function Table,directly used by various SW components,latest version 2.1
251   USHORT MemoryParamAdjust; 										 //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock if needed
252   USHORT DVOEncoderControl;                      //Function Table,directly used by various SW components,latest version 1.2
253   USHORT GPIOPinControl;												 //Atomic Table,  only used by Bios
254   USHORT SetEngineClock;                         //Function Table,directly used by various SW components,latest version 1.1
255   USHORT SetMemoryClock;                         //Function Table,directly used by various SW components,latest version 1.1
256   USHORT SetPixelClock;                          //Function Table,directly used by various SW components,latest version 1.2
257   USHORT EnableDispPowerGating;                  //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
258   USHORT ResetMemoryDLL;                         //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
259   USHORT ResetMemoryDevice;                      //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
260   USHORT MemoryPLLInit;                          //Atomic Table,  used only by Bios
261   USHORT AdjustDisplayPll;											 //Atomic Table,  used by various SW componentes.
262   USHORT AdjustMemoryController;                 //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
263   USHORT EnableASIC_StaticPwrMgt;                //Atomic Table,  only used by Bios
264   USHORT SetUniphyInstance;                      //Atomic Table,  only used by Bios
265   USHORT DAC_LoadDetection;                      //Atomic Table,  directly used by various SW components,latest version 1.2
266   USHORT LVTMAEncoderControl;                    //Atomic Table,directly used by various SW components,latest version 1.3
267   USHORT HW_Misc_Operation;                      //Atomic Table,  directly used by various SW components,latest version 1.1
268   USHORT DAC1EncoderControl;                     //Atomic Table,  directly used by various SW components,latest version 1.1
269   USHORT DAC2EncoderControl;                     //Atomic Table,  directly used by various SW components,latest version 1.1
270   USHORT DVOOutputControl;                       //Atomic Table,  directly used by various SW components,latest version 1.1
271   USHORT CV1OutputControl;                       //Atomic Table,  Atomic Table,  Obsolete from Ry6xx, use DAC2 Output instead
272   USHORT GetConditionalGoldenSetting;            //Only used by Bios
273   USHORT TVEncoderControl;                       //Function Table,directly used by various SW components,latest version 1.1
274   USHORT PatchMCSetting;                         //only used by BIOS
275   USHORT MC_SEQ_Control;                         //only used by BIOS
276   USHORT Gfx_Harvesting;                         //Atomic Table,  Obsolete from Ry6xx, Now only used by BIOS for GFX harvesting
277   USHORT EnableScaler;                           //Atomic Table,  used only by Bios
278   USHORT BlankCRTC;                              //Atomic Table,  directly used by various SW components,latest version 1.1
279   USHORT EnableCRTC;                             //Atomic Table,  directly used by various SW components,latest version 1.1
280   USHORT GetPixelClock;                          //Atomic Table,  directly used by various SW components,latest version 1.1
281   USHORT EnableVGA_Render;                       //Function Table,directly used by various SW components,latest version 1.1
282   USHORT GetSCLKOverMCLKRatio;                   //Atomic Table,  only used by Bios
283   USHORT SetCRTC_Timing;                         //Atomic Table,  directly used by various SW components,latest version 1.1
284   USHORT SetCRTC_OverScan;                       //Atomic Table,  used by various SW components,latest version 1.1
285   USHORT SetCRTC_Replication;                    //Atomic Table,  used only by Bios
286   USHORT SelectCRTC_Source;                      //Atomic Table,  directly used by various SW components,latest version 1.1
287   USHORT EnableGraphSurfaces;                    //Atomic Table,  used only by Bios
288   USHORT UpdateCRTC_DoubleBufferRegisters;			 //Atomic Table,  used only by Bios
289   USHORT LUT_AutoFill;                           //Atomic Table,  only used by Bios
290   USHORT EnableHW_IconCursor;                    //Atomic Table,  only used by Bios
291   USHORT GetMemoryClock;                         //Atomic Table,  directly used by various SW components,latest version 1.1
292   USHORT GetEngineClock;                         //Atomic Table,  directly used by various SW components,latest version 1.1
293   USHORT SetCRTC_UsingDTDTiming;                 //Atomic Table,  directly used by various SW components,latest version 1.1
294   USHORT ExternalEncoderControl;                 //Atomic Table,  directly used by various SW components,latest version 2.1
295   USHORT LVTMAOutputControl;                     //Atomic Table,  directly used by various SW components,latest version 1.1
296   USHORT VRAM_BlockDetectionByStrap;             //Atomic Table,  used only by Bios
297   USHORT MemoryCleanUp;                          //Atomic Table,  only used by Bios
298   USHORT ProcessI2cChannelTransaction;           //Function Table,only used by Bios
299   USHORT WriteOneByteToHWAssistedI2C;            //Function Table,indirectly used by various SW components
300   USHORT ReadHWAssistedI2CStatus;                //Atomic Table,  indirectly used by various SW components
301   USHORT SpeedFanControl;                        //Function Table,indirectly used by various SW components,called from ASIC_Init
302   USHORT PowerConnectorDetection;                //Atomic Table,  directly used by various SW components,latest version 1.1
303   USHORT MC_Synchronization;                     //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
304   USHORT ComputeMemoryEnginePLL;                 //Atomic Table,  indirectly used by various SW components,called from SetMemory/EngineClock
305   USHORT MemoryRefreshConversion;                //Atomic Table,  indirectly used by various SW components,called from SetMemory or SetEngineClock
306   USHORT VRAM_GetCurrentInfoBlock;               //Atomic Table,  used only by Bios
307   USHORT DynamicMemorySettings;                  //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
308   USHORT MemoryTraining;                         //Atomic Table,  used only by Bios
309   USHORT EnableSpreadSpectrumOnPPLL;             //Atomic Table,  directly used by various SW components,latest version 1.2
310   USHORT TMDSAOutputControl;                     //Atomic Table,  directly used by various SW components,latest version 1.1
311   USHORT SetVoltage;                             //Function Table,directly and/or indirectly used by various SW components,latest version 1.1
312   USHORT DAC1OutputControl;                      //Atomic Table,  directly used by various SW components,latest version 1.1
313   USHORT DAC2OutputControl;                      //Atomic Table,  directly used by various SW components,latest version 1.1
314   USHORT ComputeMemoryClockParam;                //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C"
315   USHORT ClockSource;                            //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
316   USHORT MemoryDeviceInit;                       //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
317   USHORT GetDispObjectInfo;                      //Atomic Table,  indirectly used by various SW components,called from EnableVGARender
318   USHORT DIG1EncoderControl;                     //Atomic Table,directly used by various SW components,latest version 1.1
319   USHORT DIG2EncoderControl;                     //Atomic Table,directly used by various SW components,latest version 1.1
320   USHORT DIG1TransmitterControl;                 //Atomic Table,directly used by various SW components,latest version 1.1
321   USHORT DIG2TransmitterControl;	               //Atomic Table,directly used by various SW components,latest version 1.1
322   USHORT ProcessAuxChannelTransaction;					 //Function Table,only used by Bios
323   USHORT DPEncoderService;											 //Function Table,only used by Bios
324   USHORT GetVoltageInfo;                         //Function Table,only used by Bios since SI
325 }ATOM_MASTER_LIST_OF_COMMAND_TABLES;
326 
327 // For backward compatible
328 #define ReadEDIDFromHWAssistedI2C                ProcessI2cChannelTransaction
329 #define DPTranslatorControl                      DIG2EncoderControl
330 #define UNIPHYTransmitterControl			     DIG1TransmitterControl
331 #define LVTMATransmitterControl				     DIG2TransmitterControl
332 #define SetCRTC_DPM_State                        GetConditionalGoldenSetting
333 #define ASIC_StaticPwrMgtStatusChange            SetUniphyInstance
334 #define HPDInterruptService                      ReadHWAssistedI2CStatus
335 #define EnableVGA_Access                         GetSCLKOverMCLKRatio
336 #define EnableYUV                                GetDispObjectInfo
337 #define DynamicClockGating                       EnableDispPowerGating
338 #define SetupHWAssistedI2CStatus                 ComputeMemoryClockParam
339 
340 #define TMDSAEncoderControl                      PatchMCSetting
341 #define LVDSEncoderControl                       MC_SEQ_Control
342 #define LCD1OutputControl                        HW_Misc_Operation
343 #define TV1OutputControl                         Gfx_Harvesting
344 
345 typedef struct _ATOM_MASTER_COMMAND_TABLE
346 {
347   ATOM_COMMON_TABLE_HEADER           sHeader;
348   ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables;
349 }ATOM_MASTER_COMMAND_TABLE;
350 
351 /****************************************************************************/
352 // Structures used in every command table
353 /****************************************************************************/
354 typedef struct _ATOM_TABLE_ATTRIBUTE
355 {
356 #if ATOM_BIG_ENDIAN
357   USHORT  UpdatedByUtility:1;         //[15]=Table updated by utility flag
358   USHORT  PS_SizeInBytes:7;           //[14:8]=Size of parameter space in Bytes (multiple of a dword),
359   USHORT  WS_SizeInBytes:8;           //[7:0]=Size of workspace in Bytes (in multiple of a dword),
360 #else
361   USHORT  WS_SizeInBytes:8;           //[7:0]=Size of workspace in Bytes (in multiple of a dword),
362   USHORT  PS_SizeInBytes:7;           //[14:8]=Size of parameter space in Bytes (multiple of a dword),
363   USHORT  UpdatedByUtility:1;         //[15]=Table updated by utility flag
364 #endif
365 }ATOM_TABLE_ATTRIBUTE;
366 
367 typedef union _ATOM_TABLE_ATTRIBUTE_ACCESS
368 {
369   ATOM_TABLE_ATTRIBUTE sbfAccess;
370   USHORT               susAccess;
371 }ATOM_TABLE_ATTRIBUTE_ACCESS;
372 
373 /****************************************************************************/
374 // Common header for all command tables.
375 // Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header.
376 // And the pointer actually points to this header.
377 /****************************************************************************/
378 typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER
379 {
380   ATOM_COMMON_TABLE_HEADER CommonHeader;
381   ATOM_TABLE_ATTRIBUTE     TableAttribute;
382 }ATOM_COMMON_ROM_COMMAND_TABLE_HEADER;
383 
384 /****************************************************************************/
385 // Structures used by ComputeMemoryEnginePLLTable
386 /****************************************************************************/
387 #define COMPUTE_MEMORY_PLL_PARAM        1
388 #define COMPUTE_ENGINE_PLL_PARAM        2
389 #define ADJUST_MC_SETTING_PARAM         3
390 
391 /****************************************************************************/
392 // Structures used by AdjustMemoryControllerTable
393 /****************************************************************************/
394 typedef struct _ATOM_ADJUST_MEMORY_CLOCK_FREQ
395 {
396 #if ATOM_BIG_ENDIAN
397   ULONG ulPointerReturnFlag:1;      // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block
398   ULONG ulMemoryModuleNumber:7;     // BYTE_3[6:0]
399   ULONG ulClockFreq:24;
400 #else
401   ULONG ulClockFreq:24;
402   ULONG ulMemoryModuleNumber:7;     // BYTE_3[6:0]
403   ULONG ulPointerReturnFlag:1;      // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block
404 #endif
405 }ATOM_ADJUST_MEMORY_CLOCK_FREQ;
406 #define POINTER_RETURN_FLAG             0x80
407 
408 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
409 {
410   ULONG   ulClock;        //When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div
411   UCHAR   ucAction;       //0:reserved //1:Memory //2:Engine
412   UCHAR   ucReserved;     //may expand to return larger Fbdiv later
413   UCHAR   ucFbDiv;        //return value
414   UCHAR   ucPostDiv;      //return value
415 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS;
416 
417 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2
418 {
419   ULONG   ulClock;        //When return, [23:0] return real clock
420   UCHAR   ucAction;       //0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register
421   USHORT  usFbDiv;		    //return Feedback value to be written to register
422   UCHAR   ucPostDiv;      //return post div to be written to register
423 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2;
424 #define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
425 
426 
427 #define SET_CLOCK_FREQ_MASK                     0x00FFFFFF  //Clock change tables only take bit [23:0] as the requested clock value
428 #define USE_NON_BUS_CLOCK_MASK                  0x01000000  //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa)
429 #define USE_MEMORY_SELF_REFRESH_MASK            0x02000000	//Only applicable to memory clock change, when set, using memory self refresh during clock transition
430 #define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE   0x04000000  //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change
431 #define FIRST_TIME_CHANGE_CLOCK									0x08000000	//Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup
432 #define SKIP_SW_PROGRAM_PLL											0x10000000	//Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL
433 #define USE_SS_ENABLED_PIXEL_CLOCK  USE_NON_BUS_CLOCK_MASK
434 
435 #define b3USE_NON_BUS_CLOCK_MASK                  0x01       //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa)
436 #define b3USE_MEMORY_SELF_REFRESH                 0x02	     //Only applicable to memory clock change, when set, using memory self refresh during clock transition
437 #define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE   0x04       //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change
438 #define b3FIRST_TIME_CHANGE_CLOCK									0x08       //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup
439 #define b3SKIP_SW_PROGRAM_PLL											0x10			 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL
440 
441 typedef struct _ATOM_COMPUTE_CLOCK_FREQ
442 {
443 #if ATOM_BIG_ENDIAN
444   ULONG ulComputeClockFlag:8;                 // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM
445   ULONG ulClockFreq:24;                       // in unit of 10kHz
446 #else
447   ULONG ulClockFreq:24;                       // in unit of 10kHz
448   ULONG ulComputeClockFlag:8;                 // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM
449 #endif
450 }ATOM_COMPUTE_CLOCK_FREQ;
451 
452 typedef struct _ATOM_S_MPLL_FB_DIVIDER
453 {
454   USHORT usFbDivFrac;
455   USHORT usFbDiv;
456 }ATOM_S_MPLL_FB_DIVIDER;
457 
458 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3
459 {
460   union
461   {
462     ATOM_COMPUTE_CLOCK_FREQ  ulClock;         //Input Parameter
463     ULONG ulClockParams;                      //ULONG access for BE
464     ATOM_S_MPLL_FB_DIVIDER   ulFbDiv;         //Output Parameter
465   };
466   UCHAR   ucRefDiv;                           //Output Parameter
467   UCHAR   ucPostDiv;                          //Output Parameter
468   UCHAR   ucCntlFlag;                         //Output Parameter
469   UCHAR   ucReserved;
470 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3;
471 
472 // ucCntlFlag
473 #define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN          1
474 #define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE            2
475 #define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE         4
476 #define ATOM_PLL_CNTL_FLAG_SPLL_ISPARE_9						8
477 
478 
479 // V4 are only used for APU which PLL outside GPU
480 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4
481 {
482 #if ATOM_BIG_ENDIAN
483   ULONG  ucPostDiv:8;        //return parameter: post divider which is used to program to register directly
484   ULONG  ulClock:24;         //Input= target clock, output = actual clock
485 #else
486   ULONG  ulClock:24;         //Input= target clock, output = actual clock
487   ULONG  ucPostDiv:8;        //return parameter: post divider which is used to program to register directly
488 #endif
489 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4;
490 
491 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5
492 {
493   union
494   {
495     ATOM_COMPUTE_CLOCK_FREQ  ulClock;         //Input Parameter
496     ULONG ulClockParams;                      //ULONG access for BE
497     ATOM_S_MPLL_FB_DIVIDER   ulFbDiv;         //Output Parameter
498   };
499   UCHAR   ucRefDiv;                           //Output Parameter
500   UCHAR   ucPostDiv;                          //Output Parameter
501   union
502   {
503     UCHAR   ucCntlFlag;                       //Output Flags
504     UCHAR   ucInputFlag;                      //Input Flags. ucInputFlag[0] - Strobe(1)/Performance(0) mode
505   };
506   UCHAR   ucReserved;
507 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5;
508 
509 
510 typedef struct _COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6
511 {
512   ATOM_COMPUTE_CLOCK_FREQ  ulClock;         //Input Parameter
513   ULONG   ulReserved[2];
514 }COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6;
515 
516 //ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag
517 #define COMPUTE_GPUCLK_INPUT_FLAG_CLK_TYPE_MASK            0x0f
518 #define COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK           0x00
519 #define COMPUTE_GPUCLK_INPUT_FLAG_SCLK                     0x01
520 
521 typedef struct _COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6
522 {
523   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4  ulClock;         //Output Parameter: ucPostDiv=DFS divider
524   ATOM_S_MPLL_FB_DIVIDER   ulFbDiv;         //Output Parameter: PLL FB divider
525   UCHAR   ucPllRefDiv;                      //Output Parameter: PLL ref divider
526   UCHAR   ucPllPostDiv;                     //Output Parameter: PLL post divider
527   UCHAR   ucPllCntlFlag;                    //Output Flags: control flag
528   UCHAR   ucReserved;
529 }COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6;
530 
531 //ucPllCntlFlag
532 #define SPLL_CNTL_FLAG_VCO_MODE_MASK            0x03
533 
534 
535 // ucInputFlag
536 #define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN  1   // 1-StrobeMode, 0-PerformanceMode
537 
538 // use for ComputeMemoryClockParamTable
539 typedef struct _COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1
540 {
541   union
542   {
543     ULONG  ulClock;
544     ATOM_S_MPLL_FB_DIVIDER   ulFbDiv;         //Output:UPPER_WORD=FB_DIV_INTEGER,  LOWER_WORD=FB_DIV_FRAC shl (16-FB_FRACTION_BITS)
545   };
546   UCHAR   ucDllSpeed;                         //Output
547   UCHAR   ucPostDiv;                          //Output
548   union{
549     UCHAR   ucInputFlag;                      //Input : ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN: 1-StrobeMode, 0-PerformanceMode
550     UCHAR   ucPllCntlFlag;                    //Output:
551   };
552   UCHAR   ucBWCntl;
553 }COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1;
554 
555 // definition of ucInputFlag
556 #define MPLL_INPUT_FLAG_STROBE_MODE_EN          0x01
557 // definition of ucPllCntlFlag
558 #define MPLL_CNTL_FLAG_VCO_MODE_MASK            0x03
559 #define MPLL_CNTL_FLAG_BYPASS_DQ_PLL            0x04
560 #define MPLL_CNTL_FLAG_QDR_ENABLE               0x08
561 #define MPLL_CNTL_FLAG_AD_HALF_RATE             0x10
562 
563 //MPLL_CNTL_FLAG_BYPASS_AD_PLL has a wrong name, should be BYPASS_DQ_PLL
564 #define MPLL_CNTL_FLAG_BYPASS_AD_PLL            0x04
565 
566 typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER
567 {
568   ATOM_COMPUTE_CLOCK_FREQ ulClock;
569   ULONG ulReserved[2];
570 }DYNAMICE_MEMORY_SETTINGS_PARAMETER;
571 
572 typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER
573 {
574   ATOM_COMPUTE_CLOCK_FREQ ulClock;
575   ULONG ulMemoryClock;
576   ULONG ulReserved;
577 }DYNAMICE_ENGINE_SETTINGS_PARAMETER;
578 
579 /****************************************************************************/
580 // Structures used by SetEngineClockTable
581 /****************************************************************************/
582 typedef struct _SET_ENGINE_CLOCK_PARAMETERS
583 {
584   ULONG ulTargetEngineClock;          //In 10Khz unit
585 }SET_ENGINE_CLOCK_PARAMETERS;
586 
587 typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION
588 {
589   ULONG ulTargetEngineClock;          //In 10Khz unit
590   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
591 }SET_ENGINE_CLOCK_PS_ALLOCATION;
592 
593 /****************************************************************************/
594 // Structures used by SetMemoryClockTable
595 /****************************************************************************/
596 typedef struct _SET_MEMORY_CLOCK_PARAMETERS
597 {
598   ULONG ulTargetMemoryClock;          //In 10Khz unit
599 }SET_MEMORY_CLOCK_PARAMETERS;
600 
601 typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION
602 {
603   ULONG ulTargetMemoryClock;          //In 10Khz unit
604   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
605 }SET_MEMORY_CLOCK_PS_ALLOCATION;
606 
607 /****************************************************************************/
608 // Structures used by ASIC_Init.ctb
609 /****************************************************************************/
610 typedef struct _ASIC_INIT_PARAMETERS
611 {
612   ULONG ulDefaultEngineClock;         //In 10Khz unit
613   ULONG ulDefaultMemoryClock;         //In 10Khz unit
614 }ASIC_INIT_PARAMETERS;
615 
616 typedef struct _ASIC_INIT_PS_ALLOCATION
617 {
618   ASIC_INIT_PARAMETERS sASICInitClocks;
619   SET_ENGINE_CLOCK_PS_ALLOCATION sReserved; //Caller doesn't need to init this structure
620 }ASIC_INIT_PS_ALLOCATION;
621 
622 /****************************************************************************/
623 // Structure used by DynamicClockGatingTable.ctb
624 /****************************************************************************/
625 typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS
626 {
627   UCHAR ucEnable;                     // ATOM_ENABLE or ATOM_DISABLE
628   UCHAR ucPadding[3];
629 }DYNAMIC_CLOCK_GATING_PARAMETERS;
630 #define  DYNAMIC_CLOCK_GATING_PS_ALLOCATION  DYNAMIC_CLOCK_GATING_PARAMETERS
631 
632 /****************************************************************************/
633 // Structure used by EnableDispPowerGatingTable.ctb
634 /****************************************************************************/
635 typedef struct _ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1
636 {
637   UCHAR ucDispPipeId;                 // ATOM_CRTC1, ATOM_CRTC2, ...
638   UCHAR ucEnable;                     // ATOM_ENABLE or ATOM_DISABLE
639   UCHAR ucPadding[2];
640 }ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1;
641 
642 /****************************************************************************/
643 // Structure used by EnableASIC_StaticPwrMgtTable.ctb
644 /****************************************************************************/
645 typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
646 {
647   UCHAR ucEnable;                     // ATOM_ENABLE or ATOM_DISABLE
648   UCHAR ucPadding[3];
649 }ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS;
650 #define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION  ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
651 
652 /****************************************************************************/
653 // Structures used by DAC_LoadDetectionTable.ctb
654 /****************************************************************************/
655 typedef struct _DAC_LOAD_DETECTION_PARAMETERS
656 {
657   USHORT usDeviceID;                  //{ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT}
658   UCHAR  ucDacType;                   //{ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC}
659   UCHAR  ucMisc;											//Valid only when table revision =1.3 and above
660 }DAC_LOAD_DETECTION_PARAMETERS;
661 
662 // DAC_LOAD_DETECTION_PARAMETERS.ucMisc
663 #define DAC_LOAD_MISC_YPrPb						0x01
664 
665 typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION
666 {
667   DAC_LOAD_DETECTION_PARAMETERS            sDacload;
668   ULONG                                    Reserved[2];// Don't set this one, allocation for EXT DAC
669 }DAC_LOAD_DETECTION_PS_ALLOCATION;
670 
671 /****************************************************************************/
672 // Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb
673 /****************************************************************************/
674 typedef struct _DAC_ENCODER_CONTROL_PARAMETERS
675 {
676   USHORT usPixelClock;                // in 10KHz; for bios convenient
677   UCHAR  ucDacStandard;               // See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0)
678   UCHAR  ucAction;                    // 0: turn off encoder
679                                       // 1: setup and turn on encoder
680                                       // 7: ATOM_ENCODER_INIT Initialize DAC
681 }DAC_ENCODER_CONTROL_PARAMETERS;
682 
683 #define DAC_ENCODER_CONTROL_PS_ALLOCATION  DAC_ENCODER_CONTROL_PARAMETERS
684 
685 /****************************************************************************/
686 // Structures used by DIG1EncoderControlTable
687 //                    DIG2EncoderControlTable
688 //                    ExternalEncoderControlTable
689 /****************************************************************************/
690 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS
691 {
692   USHORT usPixelClock;		// in 10KHz; for bios convenient
693   UCHAR  ucConfig;
694                             // [2] Link Select:
695                             // =0: PHY linkA if bfLane<3
696                             // =1: PHY linkB if bfLanes<3
697                             // =0: PHY linkA+B if bfLanes=3
698                             // [3] Transmitter Sel
699                             // =0: UNIPHY or PCIEPHY
700                             // =1: LVTMA
701   UCHAR ucAction;           // =0: turn off encoder
702                             // =1: turn on encoder
703   UCHAR ucEncoderMode;
704                             // =0: DP   encoder
705                             // =1: LVDS encoder
706                             // =2: DVI  encoder
707                             // =3: HDMI encoder
708                             // =4: SDVO encoder
709   UCHAR ucLaneNum;          // how many lanes to enable
710   UCHAR ucReserved[2];
711 }DIG_ENCODER_CONTROL_PARAMETERS;
712 #define DIG_ENCODER_CONTROL_PS_ALLOCATION			  DIG_ENCODER_CONTROL_PARAMETERS
713 #define EXTERNAL_ENCODER_CONTROL_PARAMETER			DIG_ENCODER_CONTROL_PARAMETERS
714 
715 //ucConfig
716 #define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK				0x01
717 #define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ		0x00
718 #define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ		0x01
719 #define ATOM_ENCODER_CONFIG_DPLINKRATE_5_40GHZ		0x02
720 #define ATOM_ENCODER_CONFIG_LINK_SEL_MASK				  0x04
721 #define ATOM_ENCODER_CONFIG_LINKA								  0x00
722 #define ATOM_ENCODER_CONFIG_LINKB								  0x04
723 #define ATOM_ENCODER_CONFIG_LINKA_B							  ATOM_TRANSMITTER_CONFIG_LINKA
724 #define ATOM_ENCODER_CONFIG_LINKB_A							  ATOM_ENCODER_CONFIG_LINKB
725 #define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK	0x08
726 #define ATOM_ENCODER_CONFIG_UNIPHY							  0x00
727 #define ATOM_ENCODER_CONFIG_LVTMA								  0x08
728 #define ATOM_ENCODER_CONFIG_TRANSMITTER1				  0x00
729 #define ATOM_ENCODER_CONFIG_TRANSMITTER2				  0x08
730 #define ATOM_ENCODER_CONFIG_DIGB								  0x80			// VBIOS Internal use, outside SW should set this bit=0
731 // ucAction
732 // ATOM_ENABLE:  Enable Encoder
733 // ATOM_DISABLE: Disable Encoder
734 
735 //ucEncoderMode
736 #define ATOM_ENCODER_MODE_DP											0
737 #define ATOM_ENCODER_MODE_LVDS										1
738 #define ATOM_ENCODER_MODE_DVI											2
739 #define ATOM_ENCODER_MODE_HDMI										3
740 #define ATOM_ENCODER_MODE_SDVO										4
741 #define ATOM_ENCODER_MODE_DP_AUDIO                5
742 #define ATOM_ENCODER_MODE_TV											13
743 #define ATOM_ENCODER_MODE_CV											14
744 #define ATOM_ENCODER_MODE_CRT											15
745 #define ATOM_ENCODER_MODE_DVO											16
746 #define ATOM_ENCODER_MODE_DP_SST                  ATOM_ENCODER_MODE_DP    // For DP1.2
747 #define ATOM_ENCODER_MODE_DP_MST                  5                       // For DP1.2
748 
749 typedef struct _ATOM_DIG_ENCODER_CONFIG_V2
750 {
751 #if ATOM_BIG_ENDIAN
752     UCHAR ucReserved1:2;
753     UCHAR ucTransmitterSel:2;     // =0: UniphyAB, =1: UniphyCD  =2: UniphyEF
754     UCHAR ucLinkSel:1;            // =0: linkA/C/E =1: linkB/D/F
755     UCHAR ucReserved:1;
756     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
757 #else
758     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
759     UCHAR ucReserved:1;
760     UCHAR ucLinkSel:1;            // =0: linkA/C/E =1: linkB/D/F
761     UCHAR ucTransmitterSel:2;     // =0: UniphyAB, =1: UniphyCD  =2: UniphyEF
762     UCHAR ucReserved1:2;
763 #endif
764 }ATOM_DIG_ENCODER_CONFIG_V2;
765 
766 
767 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2
768 {
769   USHORT usPixelClock;      // in 10KHz; for bios convenient
770   ATOM_DIG_ENCODER_CONFIG_V2 acConfig;
771   UCHAR ucAction;
772   UCHAR ucEncoderMode;
773                             // =0: DP   encoder
774                             // =1: LVDS encoder
775                             // =2: DVI  encoder
776                             // =3: HDMI encoder
777                             // =4: SDVO encoder
778   UCHAR ucLaneNum;          // how many lanes to enable
779   UCHAR ucStatus;           // = DP_LINK_TRAINING_COMPLETE or DP_LINK_TRAINING_INCOMPLETE, only used by VBIOS with command ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS
780   UCHAR ucReserved;
781 }DIG_ENCODER_CONTROL_PARAMETERS_V2;
782 
783 //ucConfig
784 #define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK				0x01
785 #define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ		  0x00
786 #define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ		  0x01
787 #define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK				  0x04
788 #define ATOM_ENCODER_CONFIG_V2_LINKA								  0x00
789 #define ATOM_ENCODER_CONFIG_V2_LINKB								  0x04
790 #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK	  0x18
791 #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1				    0x00
792 #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2				    0x08
793 #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3				    0x10
794 
795 // ucAction:
796 // ATOM_DISABLE
797 // ATOM_ENABLE
798 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_START       0x08
799 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN1    0x09
800 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN2    0x0a
801 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN3    0x13
802 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE    0x0b
803 #define ATOM_ENCODER_CMD_DP_VIDEO_OFF                 0x0c
804 #define ATOM_ENCODER_CMD_DP_VIDEO_ON                  0x0d
805 #define ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS    0x0e
806 #define ATOM_ENCODER_CMD_SETUP                        0x0f
807 #define ATOM_ENCODER_CMD_SETUP_PANEL_MODE             0x10
808 
809 // ucStatus
810 #define ATOM_ENCODER_STATUS_LINK_TRAINING_COMPLETE    0x10
811 #define ATOM_ENCODER_STATUS_LINK_TRAINING_INCOMPLETE  0x00
812 
813 //ucTableFormatRevision=1
814 //ucTableContentRevision=3
815 // Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver
816 typedef struct _ATOM_DIG_ENCODER_CONFIG_V3
817 {
818 #if ATOM_BIG_ENDIAN
819     UCHAR ucReserved1:1;
820     UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
821     UCHAR ucReserved:3;
822     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
823 #else
824     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
825     UCHAR ucReserved:3;
826     UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
827     UCHAR ucReserved1:1;
828 #endif
829 }ATOM_DIG_ENCODER_CONFIG_V3;
830 
831 #define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_MASK				0x03
832 #define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ		  0x00
833 #define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ		  0x01
834 #define ATOM_ENCODER_CONFIG_V3_ENCODER_SEL					  0x70
835 #define ATOM_ENCODER_CONFIG_V3_DIG0_ENCODER					  0x00
836 #define ATOM_ENCODER_CONFIG_V3_DIG1_ENCODER					  0x10
837 #define ATOM_ENCODER_CONFIG_V3_DIG2_ENCODER					  0x20
838 #define ATOM_ENCODER_CONFIG_V3_DIG3_ENCODER					  0x30
839 #define ATOM_ENCODER_CONFIG_V3_DIG4_ENCODER					  0x40
840 #define ATOM_ENCODER_CONFIG_V3_DIG5_ENCODER					  0x50
841 
842 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3
843 {
844   USHORT usPixelClock;      // in 10KHz; for bios convenient
845   ATOM_DIG_ENCODER_CONFIG_V3 acConfig;
846   UCHAR ucAction;
847   union {
848     UCHAR ucEncoderMode;
849                             // =0: DP   encoder
850                             // =1: LVDS encoder
851                             // =2: DVI  encoder
852                             // =3: HDMI encoder
853                             // =4: SDVO encoder
854                             // =5: DP audio
855     UCHAR ucPanelMode;      // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE
856 	                    // =0:     external DP
857 	                    // =1:     internal DP2
858 	                    // =0x11:  internal DP1 for NutMeg/Travis DP translator
859   };
860   UCHAR ucLaneNum;          // how many lanes to enable
861   UCHAR ucBitPerColor;      // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP
862   UCHAR ucReserved;
863 }DIG_ENCODER_CONTROL_PARAMETERS_V3;
864 
865 //ucTableFormatRevision=1
866 //ucTableContentRevision=4
867 // start from NI
868 // Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver
869 typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
870 {
871 #if ATOM_BIG_ENDIAN
872     UCHAR ucReserved1:1;
873     UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
874     UCHAR ucReserved:2;
875     UCHAR ucDPLinkRate:2;         // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz    <= Changed comparing to previous version
876 #else
877     UCHAR ucDPLinkRate:2;         // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz    <= Changed comparing to previous version
878     UCHAR ucReserved:2;
879     UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
880     UCHAR ucReserved1:1;
881 #endif
882 }ATOM_DIG_ENCODER_CONFIG_V4;
883 
884 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_MASK				0x03
885 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ		  0x00
886 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ		  0x01
887 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ		  0x02
888 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_3_24GHZ		  0x03
889 #define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL					  0x70
890 #define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER					  0x00
891 #define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER					  0x10
892 #define ATOM_ENCODER_CONFIG_V4_DIG2_ENCODER					  0x20
893 #define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER					  0x30
894 #define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER					  0x40
895 #define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER					  0x50
896 #define ATOM_ENCODER_CONFIG_V4_DIG6_ENCODER					  0x60
897 
898 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4
899 {
900   USHORT usPixelClock;      // in 10KHz; for bios convenient
901   union{
902   ATOM_DIG_ENCODER_CONFIG_V4 acConfig;
903   UCHAR ucConfig;
904   };
905   UCHAR ucAction;
906   union {
907     UCHAR ucEncoderMode;
908                             // =0: DP   encoder
909                             // =1: LVDS encoder
910                             // =2: DVI  encoder
911                             // =3: HDMI encoder
912                             // =4: SDVO encoder
913                             // =5: DP audio
914     UCHAR ucPanelMode;      // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE
915 	                    // =0:     external DP
916 	                    // =1:     internal DP2
917 	                    // =0x11:  internal DP1 for NutMeg/Travis DP translator
918   };
919   UCHAR ucLaneNum;          // how many lanes to enable
920   UCHAR ucBitPerColor;      // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP
921   UCHAR ucHPD_ID;           // HPD ID (1-6). =0 means to skip HDP programming. New comparing to previous version
922 }DIG_ENCODER_CONTROL_PARAMETERS_V4;
923 
924 // define ucBitPerColor:
925 #define PANEL_BPC_UNDEFINE                               0x00
926 #define PANEL_6BIT_PER_COLOR                             0x01
927 #define PANEL_8BIT_PER_COLOR                             0x02
928 #define PANEL_10BIT_PER_COLOR                            0x03
929 #define PANEL_12BIT_PER_COLOR                            0x04
930 #define PANEL_16BIT_PER_COLOR                            0x05
931 
932 //define ucPanelMode
933 #define DP_PANEL_MODE_EXTERNAL_DP_MODE                   0x00
934 #define DP_PANEL_MODE_INTERNAL_DP2_MODE                  0x01
935 #define DP_PANEL_MODE_INTERNAL_DP1_MODE                  0x11
936 
937 /****************************************************************************/
938 // Structures used by UNIPHYTransmitterControlTable
939 //                    LVTMATransmitterControlTable
940 //                    DVOOutputControlTable
941 /****************************************************************************/
942 typedef struct _ATOM_DP_VS_MODE
943 {
944   UCHAR ucLaneSel;
945   UCHAR ucLaneSet;
946 }ATOM_DP_VS_MODE;
947 
948 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS
949 {
950 	union
951 	{
952   USHORT usPixelClock;		// in 10KHz; for bios convenient
953 	USHORT usInitInfo;			// when init uniphy,lower 8bit is used for connector type defined in objectid.h
954   ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
955 	};
956   UCHAR ucConfig;
957 													// [0]=0: 4 lane Link,
958 													//    =1: 8 lane Link ( Dual Links TMDS )
959                           // [1]=0: InCoherent mode
960 													//    =1: Coherent Mode
961 													// [2] Link Select:
962   												// =0: PHY linkA   if bfLane<3
963 													// =1: PHY linkB   if bfLanes<3
964 		  										// =0: PHY linkA+B if bfLanes=3
965                           // [5:4]PCIE lane Sel
966                           // =0: lane 0~3 or 0~7
967                           // =1: lane 4~7
968                           // =2: lane 8~11 or 8~15
969                           // =3: lane 12~15
970 	UCHAR ucAction;				  // =0: turn off encoder
971 	                        // =1: turn on encoder
972   UCHAR ucReserved[4];
973 }DIG_TRANSMITTER_CONTROL_PARAMETERS;
974 
975 #define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION		DIG_TRANSMITTER_CONTROL_PARAMETERS
976 
977 //ucInitInfo
978 #define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK	0x00ff
979 
980 //ucConfig
981 #define ATOM_TRANSMITTER_CONFIG_8LANE_LINK			0x01
982 #define ATOM_TRANSMITTER_CONFIG_COHERENT				0x02
983 #define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK		0x04
984 #define ATOM_TRANSMITTER_CONFIG_LINKA						0x00
985 #define ATOM_TRANSMITTER_CONFIG_LINKB						0x04
986 #define ATOM_TRANSMITTER_CONFIG_LINKA_B					0x00
987 #define ATOM_TRANSMITTER_CONFIG_LINKB_A					0x04
988 
989 #define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK	0x08			// only used when ATOM_TRANSMITTER_ACTION_ENABLE
990 #define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER		0x00				// only used when ATOM_TRANSMITTER_ACTION_ENABLE
991 #define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER		0x08				// only used when ATOM_TRANSMITTER_ACTION_ENABLE
992 
993 #define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK			0x30
994 #define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL			0x00
995 #define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE			0x20
996 #define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN		0x30
997 #define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK		0xc0
998 #define ATOM_TRANSMITTER_CONFIG_LANE_0_3				0x00
999 #define ATOM_TRANSMITTER_CONFIG_LANE_0_7				0x00
1000 #define ATOM_TRANSMITTER_CONFIG_LANE_4_7				0x40
1001 #define ATOM_TRANSMITTER_CONFIG_LANE_8_11				0x80
1002 #define ATOM_TRANSMITTER_CONFIG_LANE_8_15				0x80
1003 #define ATOM_TRANSMITTER_CONFIG_LANE_12_15			0xc0
1004 
1005 //ucAction
1006 #define ATOM_TRANSMITTER_ACTION_DISABLE					       0
1007 #define ATOM_TRANSMITTER_ACTION_ENABLE					       1
1008 #define ATOM_TRANSMITTER_ACTION_LCD_BLOFF				       2
1009 #define ATOM_TRANSMITTER_ACTION_LCD_BLON				       3
1010 #define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL  4
1011 #define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START		 5
1012 #define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP			 6
1013 #define ATOM_TRANSMITTER_ACTION_INIT						       7
1014 #define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT	       8
1015 #define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT		       9
1016 #define ATOM_TRANSMITTER_ACTION_SETUP						       10
1017 #define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH           11
1018 #define ATOM_TRANSMITTER_ACTION_POWER_ON               12
1019 #define ATOM_TRANSMITTER_ACTION_POWER_OFF              13
1020 
1021 // Following are used for DigTransmitterControlTable ver1.2
1022 typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2
1023 {
1024 #if ATOM_BIG_ENDIAN
1025   UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1026                                     //        =1 Dig Transmitter 2 ( Uniphy CD )
1027                                     //        =2 Dig Transmitter 3 ( Uniphy EF )
1028   UCHAR ucReserved:1;
1029   UCHAR fDPConnector:1;             //bit4=0: DP connector  =1: None DP connector
1030   UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 )
1031   UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1032                                     //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1033 
1034   UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1035   UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
1036 #else
1037   UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
1038   UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1039   UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1040                                     //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1041   UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 )
1042   UCHAR fDPConnector:1;             //bit4=0: DP connector  =1: None DP connector
1043   UCHAR ucReserved:1;
1044   UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1045                                     //        =1 Dig Transmitter 2 ( Uniphy CD )
1046                                     //        =2 Dig Transmitter 3 ( Uniphy EF )
1047 #endif
1048 }ATOM_DIG_TRANSMITTER_CONFIG_V2;
1049 
1050 //ucConfig
1051 //Bit0
1052 #define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR			0x01
1053 
1054 //Bit1
1055 #define ATOM_TRANSMITTER_CONFIG_V2_COHERENT				          0x02
1056 
1057 //Bit2
1058 #define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK		        0x04
1059 #define ATOM_TRANSMITTER_CONFIG_V2_LINKA  			            0x00
1060 #define ATOM_TRANSMITTER_CONFIG_V2_LINKB				            0x04
1061 
1062 // Bit3
1063 #define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK	        0x08
1064 #define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER		          0x00				// only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP
1065 #define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER		          0x08				// only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP
1066 
1067 // Bit4
1068 #define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR			        0x10
1069 
1070 // Bit7:6
1071 #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK     0xC0
1072 #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1           	0x00	//AB
1073 #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2           	0x40	//CD
1074 #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3           	0x80	//EF
1075 
1076 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2
1077 {
1078 	union
1079 	{
1080   USHORT usPixelClock;		// in 10KHz; for bios convenient
1081 	USHORT usInitInfo;			// when init uniphy,lower 8bit is used for connector type defined in objectid.h
1082   ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
1083 	};
1084   ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig;
1085 	UCHAR ucAction;				  // define as ATOM_TRANSMITER_ACTION_XXX
1086   UCHAR ucReserved[4];
1087 }DIG_TRANSMITTER_CONTROL_PARAMETERS_V2;
1088 
1089 typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V3
1090 {
1091 #if ATOM_BIG_ENDIAN
1092   UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1093                                     //        =1 Dig Transmitter 2 ( Uniphy CD )
1094                                     //        =2 Dig Transmitter 3 ( Uniphy EF )
1095   UCHAR ucRefClkSource:2;           //bit5:4: PPLL1 =0, PPLL2=1, EXT_CLK=2
1096   UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
1097   UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1098                                     //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1099   UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1100   UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
1101 #else
1102   UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
1103   UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1104   UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1105                                     //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1106   UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
1107   UCHAR ucRefClkSource:2;           //bit5:4: PPLL1 =0, PPLL2=1, EXT_CLK=2
1108   UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1109                                     //        =1 Dig Transmitter 2 ( Uniphy CD )
1110                                     //        =2 Dig Transmitter 3 ( Uniphy EF )
1111 #endif
1112 }ATOM_DIG_TRANSMITTER_CONFIG_V3;
1113 
1114 
1115 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V3
1116 {
1117 	union
1118 	{
1119     USHORT usPixelClock;		// in 10KHz; for bios convenient
1120 	  USHORT usInitInfo;			// when init uniphy,lower 8bit is used for connector type defined in objectid.h
1121     ATOM_DP_VS_MODE asMode; // DP Voltage swing mode
1122 	};
1123   ATOM_DIG_TRANSMITTER_CONFIG_V3 acConfig;
1124 	UCHAR ucAction;				    // define as ATOM_TRANSMITER_ACTION_XXX
1125   UCHAR ucLaneNum;
1126   UCHAR ucReserved[3];
1127 }DIG_TRANSMITTER_CONTROL_PARAMETERS_V3;
1128 
1129 //ucConfig
1130 //Bit0
1131 #define ATOM_TRANSMITTER_CONFIG_V3_DUAL_LINK_CONNECTOR			0x01
1132 
1133 //Bit1
1134 #define ATOM_TRANSMITTER_CONFIG_V3_COHERENT				          0x02
1135 
1136 //Bit2
1137 #define ATOM_TRANSMITTER_CONFIG_V3_LINK_SEL_MASK		        0x04
1138 #define ATOM_TRANSMITTER_CONFIG_V3_LINKA  			            0x00
1139 #define ATOM_TRANSMITTER_CONFIG_V3_LINKB				            0x04
1140 
1141 // Bit3
1142 #define ATOM_TRANSMITTER_CONFIG_V3_ENCODER_SEL_MASK	        0x08
1143 #define ATOM_TRANSMITTER_CONFIG_V3_DIG1_ENCODER		          0x00
1144 #define ATOM_TRANSMITTER_CONFIG_V3_DIG2_ENCODER		          0x08
1145 
1146 // Bit5:4
1147 #define ATOM_TRASMITTER_CONFIG_V3_REFCLK_SEL_MASK 	        0x30
1148 #define ATOM_TRASMITTER_CONFIG_V3_P1PLL          		        0x00
1149 #define ATOM_TRASMITTER_CONFIG_V3_P2PLL		                  0x10
1150 #define ATOM_TRASMITTER_CONFIG_V3_REFCLK_SRC_EXT            0x20
1151 
1152 // Bit7:6
1153 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER_SEL_MASK     0xC0
1154 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER1           	0x00	//AB
1155 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER2           	0x40	//CD
1156 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER3           	0x80	//EF
1157 
1158 
1159 /****************************************************************************/
1160 // Structures used by UNIPHYTransmitterControlTable V1.4
1161 // ASIC Families: NI
1162 // ucTableFormatRevision=1
1163 // ucTableContentRevision=4
1164 /****************************************************************************/
1165 typedef struct _ATOM_DP_VS_MODE_V4
1166 {
1167   UCHAR ucLaneSel;
1168  	union
1169  	{
1170  	  UCHAR ucLaneSet;
1171  	  struct {
1172 #if ATOM_BIG_ENDIAN
1173  		  UCHAR ucPOST_CURSOR2:2;         //Bit[7:6] Post Cursor2 Level      <= New in V4
1174  		  UCHAR ucPRE_EMPHASIS:3;         //Bit[5:3] Pre-emphasis Level
1175  		  UCHAR ucVOLTAGE_SWING:3;        //Bit[2:0] Voltage Swing Level
1176 #else
1177  		  UCHAR ucVOLTAGE_SWING:3;        //Bit[2:0] Voltage Swing Level
1178  		  UCHAR ucPRE_EMPHASIS:3;         //Bit[5:3] Pre-emphasis Level
1179  		  UCHAR ucPOST_CURSOR2:2;         //Bit[7:6] Post Cursor2 Level      <= New in V4
1180 #endif
1181  		};
1182  	};
1183 }ATOM_DP_VS_MODE_V4;
1184 
1185 typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V4
1186 {
1187 #if ATOM_BIG_ENDIAN
1188   UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1189                                     //        =1 Dig Transmitter 2 ( Uniphy CD )
1190                                     //        =2 Dig Transmitter 3 ( Uniphy EF )
1191   UCHAR ucRefClkSource:2;           //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3   <= New
1192   UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
1193   UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1194                                     //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1195   UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1196   UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
1197 #else
1198   UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
1199   UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
1200   UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
1201                                     //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
1202   UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
1203   UCHAR ucRefClkSource:2;           //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3   <= New
1204   UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
1205                                     //        =1 Dig Transmitter 2 ( Uniphy CD )
1206                                     //        =2 Dig Transmitter 3 ( Uniphy EF )
1207 #endif
1208 }ATOM_DIG_TRANSMITTER_CONFIG_V4;
1209 
1210 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4
1211 {
1212   union
1213   {
1214     USHORT usPixelClock;		// in 10KHz; for bios convenient
1215     USHORT usInitInfo;			// when init uniphy,lower 8bit is used for connector type defined in objectid.h
1216     ATOM_DP_VS_MODE_V4 asMode; // DP Voltage swing mode     Redefined comparing to previous version
1217   };
1218   union
1219   {
1220   ATOM_DIG_TRANSMITTER_CONFIG_V4 acConfig;
1221   UCHAR ucConfig;
1222   };
1223   UCHAR ucAction;				    // define as ATOM_TRANSMITER_ACTION_XXX
1224   UCHAR ucLaneNum;
1225   UCHAR ucReserved[3];
1226 }DIG_TRANSMITTER_CONTROL_PARAMETERS_V4;
1227 
1228 //ucConfig
1229 //Bit0
1230 #define ATOM_TRANSMITTER_CONFIG_V4_DUAL_LINK_CONNECTOR			0x01
1231 //Bit1
1232 #define ATOM_TRANSMITTER_CONFIG_V4_COHERENT				          0x02
1233 //Bit2
1234 #define ATOM_TRANSMITTER_CONFIG_V4_LINK_SEL_MASK		        0x04
1235 #define ATOM_TRANSMITTER_CONFIG_V4_LINKA  			            0x00
1236 #define ATOM_TRANSMITTER_CONFIG_V4_LINKB				            0x04
1237 // Bit3
1238 #define ATOM_TRANSMITTER_CONFIG_V4_ENCODER_SEL_MASK	        0x08
1239 #define ATOM_TRANSMITTER_CONFIG_V4_DIG1_ENCODER		          0x00
1240 #define ATOM_TRANSMITTER_CONFIG_V4_DIG2_ENCODER		          0x08
1241 // Bit5:4
1242 #define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SEL_MASK 	        0x30
1243 #define ATOM_TRANSMITTER_CONFIG_V4_P1PLL         		        0x00
1244 #define ATOM_TRANSMITTER_CONFIG_V4_P2PLL		                0x10
1245 #define ATOM_TRANSMITTER_CONFIG_V4_DCPLL		                0x20   // New in _V4
1246 #define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SRC_EXT           0x30   // Changed comparing to V3
1247 // Bit7:6
1248 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER_SEL_MASK     0xC0
1249 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER1           	0x00	//AB
1250 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER2           	0x40	//CD
1251 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3           	0x80	//EF
1252 
1253 
1254 typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V5
1255 {
1256 #if ATOM_BIG_ENDIAN
1257   UCHAR ucReservd1:1;
1258   UCHAR ucHPDSel:3;
1259   UCHAR ucPhyClkSrcId:2;
1260   UCHAR ucCoherentMode:1;
1261   UCHAR ucReserved:1;
1262 #else
1263   UCHAR ucReserved:1;
1264   UCHAR ucCoherentMode:1;
1265   UCHAR ucPhyClkSrcId:2;
1266   UCHAR ucHPDSel:3;
1267   UCHAR ucReservd1:1;
1268 #endif
1269 }ATOM_DIG_TRANSMITTER_CONFIG_V5;
1270 
1271 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5
1272 {
1273   USHORT usSymClock;		        // Encoder Clock in 10kHz,(DP mode)= linkclock/10, (TMDS/LVDS/HDMI)= pixel clock,  (HDMI deep color), =pixel clock * deep_color_ratio
1274   UCHAR  ucPhyId;                   // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF
1275   UCHAR  ucAction;				    // define as ATOM_TRANSMITER_ACTION_xxx
1276   UCHAR  ucLaneNum;                 // indicate lane number 1-8
1277   UCHAR  ucConnObjId;               // Connector Object Id defined in ObjectId.h
1278   UCHAR  ucDigMode;                 // indicate DIG mode
1279   union{
1280   ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig;
1281   UCHAR ucConfig;
1282   };
1283   UCHAR  ucDigEncoderSel;           // indicate DIG front end encoder
1284   UCHAR  ucDPLaneSet;
1285   UCHAR  ucReserved;
1286   UCHAR  ucReserved1;
1287 }DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5;
1288 
1289 //ucPhyId
1290 #define ATOM_PHY_ID_UNIPHYA                                 0
1291 #define ATOM_PHY_ID_UNIPHYB                                 1
1292 #define ATOM_PHY_ID_UNIPHYC                                 2
1293 #define ATOM_PHY_ID_UNIPHYD                                 3
1294 #define ATOM_PHY_ID_UNIPHYE                                 4
1295 #define ATOM_PHY_ID_UNIPHYF                                 5
1296 #define ATOM_PHY_ID_UNIPHYG                                 6
1297 
1298 // ucDigEncoderSel
1299 #define ATOM_TRANMSITTER_V5__DIGA_SEL                       0x01
1300 #define ATOM_TRANMSITTER_V5__DIGB_SEL                       0x02
1301 #define ATOM_TRANMSITTER_V5__DIGC_SEL                       0x04
1302 #define ATOM_TRANMSITTER_V5__DIGD_SEL                       0x08
1303 #define ATOM_TRANMSITTER_V5__DIGE_SEL                       0x10
1304 #define ATOM_TRANMSITTER_V5__DIGF_SEL                       0x20
1305 #define ATOM_TRANMSITTER_V5__DIGG_SEL                       0x40
1306 
1307 // ucDigMode
1308 #define ATOM_TRANSMITTER_DIGMODE_V5_DP                      0
1309 #define ATOM_TRANSMITTER_DIGMODE_V5_LVDS                    1
1310 #define ATOM_TRANSMITTER_DIGMODE_V5_DVI                     2
1311 #define ATOM_TRANSMITTER_DIGMODE_V5_HDMI                    3
1312 #define ATOM_TRANSMITTER_DIGMODE_V5_SDVO                    4
1313 #define ATOM_TRANSMITTER_DIGMODE_V5_DP_MST                  5
1314 
1315 // ucDPLaneSet
1316 #define DP_LANE_SET__0DB_0_4V                               0x00
1317 #define DP_LANE_SET__0DB_0_6V                               0x01
1318 #define DP_LANE_SET__0DB_0_8V                               0x02
1319 #define DP_LANE_SET__0DB_1_2V                               0x03
1320 #define DP_LANE_SET__3_5DB_0_4V                             0x08
1321 #define DP_LANE_SET__3_5DB_0_6V                             0x09
1322 #define DP_LANE_SET__3_5DB_0_8V                             0x0a
1323 #define DP_LANE_SET__6DB_0_4V                               0x10
1324 #define DP_LANE_SET__6DB_0_6V                               0x11
1325 #define DP_LANE_SET__9_5DB_0_4V                             0x18
1326 
1327 // ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig;
1328 // Bit1
1329 #define ATOM_TRANSMITTER_CONFIG_V5_COHERENT				          0x02
1330 
1331 // Bit3:2
1332 #define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_MASK 	        0x0c
1333 #define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_SHIFT		    0x02
1334 
1335 #define ATOM_TRANSMITTER_CONFIG_V5_P1PLL         		        0x00
1336 #define ATOM_TRANSMITTER_CONFIG_V5_P2PLL		                0x04
1337 #define ATOM_TRANSMITTER_CONFIG_V5_P0PLL		                0x08
1338 #define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SRC_EXT           0x0c
1339 // Bit6:4
1340 #define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_MASK		          0x70
1341 #define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_SHIFT		      0x04
1342 
1343 #define ATOM_TRANSMITTER_CONFIG_V5_NO_HPD_SEL				        0x00
1344 #define ATOM_TRANSMITTER_CONFIG_V5_HPD1_SEL				          0x10
1345 #define ATOM_TRANSMITTER_CONFIG_V5_HPD2_SEL				          0x20
1346 #define ATOM_TRANSMITTER_CONFIG_V5_HPD3_SEL				          0x30
1347 #define ATOM_TRANSMITTER_CONFIG_V5_HPD4_SEL				          0x40
1348 #define ATOM_TRANSMITTER_CONFIG_V5_HPD5_SEL				          0x50
1349 #define ATOM_TRANSMITTER_CONFIG_V5_HPD6_SEL				          0x60
1350 
1351 #define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION_V1_5            DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5
1352 
1353 
1354 /****************************************************************************/
1355 // Structures used by ExternalEncoderControlTable V1.3
1356 // ASIC Families: Evergreen, Llano, NI
1357 // ucTableFormatRevision=1
1358 // ucTableContentRevision=3
1359 /****************************************************************************/
1360 
1361 typedef struct _EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3
1362 {
1363   union{
1364   USHORT usPixelClock;      // pixel clock in 10Khz, valid when ucAction=SETUP/ENABLE_OUTPUT
1365   USHORT usConnectorId;     // connector id, valid when ucAction = INIT
1366   };
1367   UCHAR  ucConfig;          // indicate which encoder, and DP link rate when ucAction = SETUP/ENABLE_OUTPUT
1368   UCHAR  ucAction;          //
1369   UCHAR  ucEncoderMode;     // encoder mode, only used when ucAction = SETUP/ENABLE_OUTPUT
1370   UCHAR  ucLaneNum;         // lane number, only used when ucAction = SETUP/ENABLE_OUTPUT
1371   UCHAR  ucBitPerColor;     // output bit per color, only valid when ucAction = SETUP/ENABLE_OUTPUT and ucEncodeMode= DP
1372   UCHAR  ucReserved;
1373 }EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3;
1374 
1375 // ucAction
1376 #define EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT         0x00
1377 #define EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT          0x01
1378 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT           0x07
1379 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP          0x0f
1380 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF   0x10
1381 #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING       0x11
1382 #define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION      0x12
1383 #define EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP              0x14
1384 
1385 // ucConfig
1386 #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK				0x03
1387 #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ		  0x00
1388 #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ		  0x01
1389 #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ		  0x02
1390 #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER_SEL_MASK		    0x70
1391 #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER1		            0x00
1392 #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER2		            0x10
1393 #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER3		            0x20
1394 
1395 typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3
1396 {
1397   EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 sExtEncoder;
1398   ULONG ulReserved[2];
1399 }EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3;
1400 
1401 
1402 /****************************************************************************/
1403 // Structures used by DAC1OuputControlTable
1404 //                    DAC2OuputControlTable
1405 //                    LVTMAOutputControlTable  (Before DEC30)
1406 //                    TMDSAOutputControlTable  (Before DEC30)
1407 /****************************************************************************/
1408 typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1409 {
1410   UCHAR  ucAction;                    // Possible input:ATOM_ENABLE||ATOMDISABLE
1411                                       // When the display is LCD, in addition to above:
1412                                       // ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START||
1413                                       // ATOM_LCD_SELFTEST_STOP
1414 
1415   UCHAR  aucPadding[3];               // padding to DWORD aligned
1416 }DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS;
1417 
1418 #define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1419 
1420 
1421 #define CRT1_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1422 #define CRT1_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1423 
1424 #define CRT2_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1425 #define CRT2_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1426 
1427 #define CV1_OUTPUT_CONTROL_PARAMETERS      DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1428 #define CV1_OUTPUT_CONTROL_PS_ALLOCATION   DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1429 
1430 #define TV1_OUTPUT_CONTROL_PARAMETERS      DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1431 #define TV1_OUTPUT_CONTROL_PS_ALLOCATION   DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1432 
1433 #define DFP1_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1434 #define DFP1_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1435 
1436 #define DFP2_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1437 #define DFP2_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1438 
1439 #define LCD1_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1440 #define LCD1_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
1441 
1442 #define DVO_OUTPUT_CONTROL_PARAMETERS      DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
1443 #define DVO_OUTPUT_CONTROL_PS_ALLOCATION   DIG_TRANSMITTER_CONTROL_PS_ALLOCATION
1444 #define DVO_OUTPUT_CONTROL_PARAMETERS_V3	 DIG_TRANSMITTER_CONTROL_PARAMETERS
1445 
1446 /****************************************************************************/
1447 // Structures used by BlankCRTCTable
1448 /****************************************************************************/
1449 typedef struct _BLANK_CRTC_PARAMETERS
1450 {
1451   UCHAR  ucCRTC;                    	// ATOM_CRTC1 or ATOM_CRTC2
1452   UCHAR  ucBlanking;                  // ATOM_BLANKING or ATOM_BLANKINGOFF
1453   USHORT usBlackColorRCr;
1454   USHORT usBlackColorGY;
1455   USHORT usBlackColorBCb;
1456 }BLANK_CRTC_PARAMETERS;
1457 #define BLANK_CRTC_PS_ALLOCATION    BLANK_CRTC_PARAMETERS
1458 
1459 /****************************************************************************/
1460 // Structures used by EnableCRTCTable
1461 //                    EnableCRTCMemReqTable
1462 //                    UpdateCRTC_DoubleBufferRegistersTable
1463 /****************************************************************************/
1464 typedef struct _ENABLE_CRTC_PARAMETERS
1465 {
1466   UCHAR ucCRTC;                    	  // ATOM_CRTC1 or ATOM_CRTC2
1467   UCHAR ucEnable;                     // ATOM_ENABLE or ATOM_DISABLE
1468   UCHAR ucPadding[2];
1469 }ENABLE_CRTC_PARAMETERS;
1470 #define ENABLE_CRTC_PS_ALLOCATION   ENABLE_CRTC_PARAMETERS
1471 
1472 /****************************************************************************/
1473 // Structures used by SetCRTC_OverScanTable
1474 /****************************************************************************/
1475 typedef struct _SET_CRTC_OVERSCAN_PARAMETERS
1476 {
1477   USHORT usOverscanRight;             // right
1478   USHORT usOverscanLeft;              // left
1479   USHORT usOverscanBottom;            // bottom
1480   USHORT usOverscanTop;               // top
1481   UCHAR  ucCRTC;                      // ATOM_CRTC1 or ATOM_CRTC2
1482   UCHAR  ucPadding[3];
1483 }SET_CRTC_OVERSCAN_PARAMETERS;
1484 #define SET_CRTC_OVERSCAN_PS_ALLOCATION  SET_CRTC_OVERSCAN_PARAMETERS
1485 
1486 /****************************************************************************/
1487 // Structures used by SetCRTC_ReplicationTable
1488 /****************************************************************************/
1489 typedef struct _SET_CRTC_REPLICATION_PARAMETERS
1490 {
1491   UCHAR ucH_Replication;              // horizontal replication
1492   UCHAR ucV_Replication;              // vertical replication
1493   UCHAR usCRTC;                       // ATOM_CRTC1 or ATOM_CRTC2
1494   UCHAR ucPadding;
1495 }SET_CRTC_REPLICATION_PARAMETERS;
1496 #define SET_CRTC_REPLICATION_PS_ALLOCATION  SET_CRTC_REPLICATION_PARAMETERS
1497 
1498 /****************************************************************************/
1499 // Structures used by SelectCRTC_SourceTable
1500 /****************************************************************************/
1501 typedef struct _SELECT_CRTC_SOURCE_PARAMETERS
1502 {
1503   UCHAR ucCRTC;                    	  // ATOM_CRTC1 or ATOM_CRTC2
1504   UCHAR ucDevice;                     // ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|....
1505   UCHAR ucPadding[2];
1506 }SELECT_CRTC_SOURCE_PARAMETERS;
1507 #define SELECT_CRTC_SOURCE_PS_ALLOCATION  SELECT_CRTC_SOURCE_PARAMETERS
1508 
1509 typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2
1510 {
1511   UCHAR ucCRTC;                    	  // ATOM_CRTC1 or ATOM_CRTC2
1512   UCHAR ucEncoderID;                  // DAC1/DAC2/TVOUT/DIG1/DIG2/DVO
1513   UCHAR ucEncodeMode;									// Encoding mode, only valid when using DIG1/DIG2/DVO
1514   UCHAR ucPadding;
1515 }SELECT_CRTC_SOURCE_PARAMETERS_V2;
1516 
1517 //ucEncoderID
1518 //#define ASIC_INT_DAC1_ENCODER_ID    						0x00
1519 //#define ASIC_INT_TV_ENCODER_ID									0x02
1520 //#define ASIC_INT_DIG1_ENCODER_ID								0x03
1521 //#define ASIC_INT_DAC2_ENCODER_ID								0x04
1522 //#define ASIC_EXT_TV_ENCODER_ID									0x06
1523 //#define ASIC_INT_DVO_ENCODER_ID									0x07
1524 //#define ASIC_INT_DIG2_ENCODER_ID								0x09
1525 //#define ASIC_EXT_DIG_ENCODER_ID									0x05
1526 
1527 //ucEncodeMode
1528 //#define ATOM_ENCODER_MODE_DP										0
1529 //#define ATOM_ENCODER_MODE_LVDS									1
1530 //#define ATOM_ENCODER_MODE_DVI										2
1531 //#define ATOM_ENCODER_MODE_HDMI									3
1532 //#define ATOM_ENCODER_MODE_SDVO									4
1533 //#define ATOM_ENCODER_MODE_TV										13
1534 //#define ATOM_ENCODER_MODE_CV										14
1535 //#define ATOM_ENCODER_MODE_CRT										15
1536 
1537 /****************************************************************************/
1538 // Structures used by SetPixelClockTable
1539 //                    GetPixelClockTable
1540 /****************************************************************************/
1541 //Major revision=1., Minor revision=1
1542 typedef struct _PIXEL_CLOCK_PARAMETERS
1543 {
1544   USHORT usPixelClock;                // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
1545                                       // 0 means disable PPLL
1546   USHORT usRefDiv;                    // Reference divider
1547   USHORT usFbDiv;                     // feedback divider
1548   UCHAR  ucPostDiv;                   // post divider
1549   UCHAR  ucFracFbDiv;                 // fractional feedback divider
1550   UCHAR  ucPpll;                      // ATOM_PPLL1 or ATOM_PPL2
1551   UCHAR  ucRefDivSrc;                 // ATOM_PJITTER or ATO_NONPJITTER
1552   UCHAR  ucCRTC;                      // Which CRTC uses this Ppll
1553   UCHAR  ucPadding;
1554 }PIXEL_CLOCK_PARAMETERS;
1555 
1556 //Major revision=1., Minor revision=2, add ucMiscIfno
1557 //ucMiscInfo:
1558 #define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1
1559 #define MISC_DEVICE_INDEX_MASK        0xF0
1560 #define MISC_DEVICE_INDEX_SHIFT       4
1561 
1562 typedef struct _PIXEL_CLOCK_PARAMETERS_V2
1563 {
1564   USHORT usPixelClock;                // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
1565                                       // 0 means disable PPLL
1566   USHORT usRefDiv;                    // Reference divider
1567   USHORT usFbDiv;                     // feedback divider
1568   UCHAR  ucPostDiv;                   // post divider
1569   UCHAR  ucFracFbDiv;                 // fractional feedback divider
1570   UCHAR  ucPpll;                      // ATOM_PPLL1 or ATOM_PPL2
1571   UCHAR  ucRefDivSrc;                 // ATOM_PJITTER or ATO_NONPJITTER
1572   UCHAR  ucCRTC;                      // Which CRTC uses this Ppll
1573   UCHAR  ucMiscInfo;                  // Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog
1574 }PIXEL_CLOCK_PARAMETERS_V2;
1575 
1576 //Major revision=1., Minor revision=3, structure/definition change
1577 //ucEncoderMode:
1578 //ATOM_ENCODER_MODE_DP
1579 //ATOM_ENOCDER_MODE_LVDS
1580 //ATOM_ENOCDER_MODE_DVI
1581 //ATOM_ENOCDER_MODE_HDMI
1582 //ATOM_ENOCDER_MODE_SDVO
1583 //ATOM_ENCODER_MODE_TV										13
1584 //ATOM_ENCODER_MODE_CV										14
1585 //ATOM_ENCODER_MODE_CRT										15
1586 
1587 //ucDVOConfig
1588 //#define DVO_ENCODER_CONFIG_RATE_SEL							0x01
1589 //#define DVO_ENCODER_CONFIG_DDR_SPEED						0x00
1590 //#define DVO_ENCODER_CONFIG_SDR_SPEED						0x01
1591 //#define DVO_ENCODER_CONFIG_OUTPUT_SEL						0x0c
1592 //#define DVO_ENCODER_CONFIG_LOW12BIT							0x00
1593 //#define DVO_ENCODER_CONFIG_UPPER12BIT						0x04
1594 //#define DVO_ENCODER_CONFIG_24BIT								0x08
1595 
1596 //ucMiscInfo: also changed, see below
1597 #define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL						0x01
1598 #define PIXEL_CLOCK_MISC_VGA_MODE										0x02
1599 #define PIXEL_CLOCK_MISC_CRTC_SEL_MASK							0x04
1600 #define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1							0x00
1601 #define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2							0x04
1602 #define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK			0x08
1603 #define PIXEL_CLOCK_MISC_REF_DIV_SRC                    0x10
1604 // V1.4 for RoadRunner
1605 #define PIXEL_CLOCK_V4_MISC_SS_ENABLE               0x10
1606 #define PIXEL_CLOCK_V4_MISC_COHERENT_MODE           0x20
1607 
1608 
1609 typedef struct _PIXEL_CLOCK_PARAMETERS_V3
1610 {
1611   USHORT usPixelClock;                // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
1612                                       // 0 means disable PPLL. For VGA PPLL,make sure this value is not 0.
1613   USHORT usRefDiv;                    // Reference divider
1614   USHORT usFbDiv;                     // feedback divider
1615   UCHAR  ucPostDiv;                   // post divider
1616   UCHAR  ucFracFbDiv;                 // fractional feedback divider
1617   UCHAR  ucPpll;                      // ATOM_PPLL1 or ATOM_PPL2
1618   UCHAR  ucTransmitterId;             // graphic encoder id defined in objectId.h
1619 	union
1620 	{
1621   UCHAR  ucEncoderMode;               // encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/
1622 	UCHAR  ucDVOConfig;									// when use DVO, need to know SDR/DDR, 12bit or 24bit
1623 	};
1624   UCHAR  ucMiscInfo;                  // bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel
1625                                       // bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source
1626                                       // bit[4]=0:use XTALIN as the source of reference divider,=1 use the pre-defined clock as the source of reference divider
1627 }PIXEL_CLOCK_PARAMETERS_V3;
1628 
1629 #define PIXEL_CLOCK_PARAMETERS_LAST			PIXEL_CLOCK_PARAMETERS_V2
1630 #define GET_PIXEL_CLOCK_PS_ALLOCATION		PIXEL_CLOCK_PARAMETERS_LAST
1631 
1632 typedef struct _PIXEL_CLOCK_PARAMETERS_V5
1633 {
1634   UCHAR  ucCRTC;             // ATOM_CRTC1~6, indicate the CRTC controller to
1635                              // drive the pixel clock. not used for DCPLL case.
1636   union{
1637   UCHAR  ucReserved;
1638   UCHAR  ucFracFbDiv;        // [gphan] temporary to prevent build problem.  remove it after driver code is changed.
1639   };
1640   USHORT usPixelClock;       // target the pixel clock to drive the CRTC timing
1641                              // 0 means disable PPLL/DCPLL.
1642   USHORT usFbDiv;            // feedback divider integer part.
1643   UCHAR  ucPostDiv;          // post divider.
1644   UCHAR  ucRefDiv;           // Reference divider
1645   UCHAR  ucPpll;             // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL
1646   UCHAR  ucTransmitterID;    // ASIC encoder id defined in objectId.h,
1647                              // indicate which graphic encoder will be used.
1648   UCHAR  ucEncoderMode;      // Encoder mode:
1649   UCHAR  ucMiscInfo;         // bit[0]= Force program PPLL
1650                              // bit[1]= when VGA timing is used.
1651                              // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp
1652                              // bit[4]= RefClock source for PPLL.
1653                              // =0: XTLAIN( default mode )
1654 	                           // =1: other external clock source, which is pre-defined
1655                              //     by VBIOS depend on the feature required.
1656                              // bit[7:5]: reserved.
1657   ULONG  ulFbDivDecFrac;     // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 )
1658 
1659 }PIXEL_CLOCK_PARAMETERS_V5;
1660 
1661 #define PIXEL_CLOCK_V5_MISC_FORCE_PROG_PPLL					0x01
1662 #define PIXEL_CLOCK_V5_MISC_VGA_MODE								0x02
1663 #define PIXEL_CLOCK_V5_MISC_HDMI_BPP_MASK           0x0c
1664 #define PIXEL_CLOCK_V5_MISC_HDMI_24BPP              0x00
1665 #define PIXEL_CLOCK_V5_MISC_HDMI_30BPP              0x04
1666 #define PIXEL_CLOCK_V5_MISC_HDMI_32BPP              0x08
1667 #define PIXEL_CLOCK_V5_MISC_REF_DIV_SRC             0x10
1668 
1669 typedef struct _CRTC_PIXEL_CLOCK_FREQ
1670 {
1671 #if ATOM_BIG_ENDIAN
1672   ULONG  ucCRTC:8;            // ATOM_CRTC1~6, indicate the CRTC controller to
1673                               // drive the pixel clock. not used for DCPLL case.
1674   ULONG  ulPixelClock:24;     // target the pixel clock to drive the CRTC timing.
1675                               // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version.
1676 #else
1677   ULONG  ulPixelClock:24;     // target the pixel clock to drive the CRTC timing.
1678                               // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version.
1679   ULONG  ucCRTC:8;            // ATOM_CRTC1~6, indicate the CRTC controller to
1680                               // drive the pixel clock. not used for DCPLL case.
1681 #endif
1682 }CRTC_PIXEL_CLOCK_FREQ;
1683 
1684 typedef struct _PIXEL_CLOCK_PARAMETERS_V6
1685 {
1686   union{
1687     CRTC_PIXEL_CLOCK_FREQ ulCrtcPclkFreq;    // pixel clock and CRTC id frequency
1688     ULONG ulDispEngClkFreq;                  // dispclk frequency
1689   };
1690   USHORT usFbDiv;            // feedback divider integer part.
1691   UCHAR  ucPostDiv;          // post divider.
1692   UCHAR  ucRefDiv;           // Reference divider
1693   UCHAR  ucPpll;             // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL
1694   UCHAR  ucTransmitterID;    // ASIC encoder id defined in objectId.h,
1695                              // indicate which graphic encoder will be used.
1696   UCHAR  ucEncoderMode;      // Encoder mode:
1697   UCHAR  ucMiscInfo;         // bit[0]= Force program PPLL
1698                              // bit[1]= when VGA timing is used.
1699                              // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp
1700                              // bit[4]= RefClock source for PPLL.
1701                              // =0: XTLAIN( default mode )
1702 	                           // =1: other external clock source, which is pre-defined
1703                              //     by VBIOS depend on the feature required.
1704                              // bit[7:5]: reserved.
1705   ULONG  ulFbDivDecFrac;     // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 )
1706 
1707 }PIXEL_CLOCK_PARAMETERS_V6;
1708 
1709 #define PIXEL_CLOCK_V6_MISC_FORCE_PROG_PPLL					0x01
1710 #define PIXEL_CLOCK_V6_MISC_VGA_MODE								0x02
1711 #define PIXEL_CLOCK_V6_MISC_HDMI_BPP_MASK           0x0c
1712 #define PIXEL_CLOCK_V6_MISC_HDMI_24BPP              0x00
1713 #define PIXEL_CLOCK_V6_MISC_HDMI_36BPP              0x04
1714 #define PIXEL_CLOCK_V6_MISC_HDMI_36BPP_V6           0x08    //for V6, the correct defintion for 36bpp should be 2 for 36bpp(2:1)
1715 #define PIXEL_CLOCK_V6_MISC_HDMI_30BPP              0x08
1716 #define PIXEL_CLOCK_V6_MISC_HDMI_30BPP_V6           0x04    //for V6, the correct defintion for 30bpp should be 1 for 36bpp(5:4)
1717 #define PIXEL_CLOCK_V6_MISC_HDMI_48BPP              0x0c
1718 #define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC             0x10
1719 #define PIXEL_CLOCK_V6_MISC_GEN_DPREFCLK            0x40
1720 
1721 typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2
1722 {
1723   PIXEL_CLOCK_PARAMETERS_V3 sDispClkInput;
1724 }GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2;
1725 
1726 typedef struct _GET_DISP_PLL_STATUS_OUTPUT_PARAMETERS_V2
1727 {
1728   UCHAR  ucStatus;
1729   UCHAR  ucRefDivSrc;                 // =1: reference clock source from XTALIN, =0: source from PCIE ref clock
1730   UCHAR  ucReserved[2];
1731 }GET_DISP_PLL_STATUS_OUTPUT_PARAMETERS_V2;
1732 
1733 typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V3
1734 {
1735   PIXEL_CLOCK_PARAMETERS_V5 sDispClkInput;
1736 }GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V3;
1737 
1738 /****************************************************************************/
1739 // Structures used by AdjustDisplayPllTable
1740 /****************************************************************************/
1741 typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS
1742 {
1743 	USHORT usPixelClock;
1744 	UCHAR ucTransmitterID;
1745 	UCHAR ucEncodeMode;
1746 	union
1747 	{
1748 		UCHAR ucDVOConfig;									//if DVO, need passing link rate and output 12bitlow or 24bit
1749 		UCHAR ucConfig;											//if none DVO, not defined yet
1750 	};
1751 	UCHAR ucReserved[3];
1752 }ADJUST_DISPLAY_PLL_PARAMETERS;
1753 
1754 #define ADJUST_DISPLAY_CONFIG_SS_ENABLE       0x10
1755 #define ADJUST_DISPLAY_PLL_PS_ALLOCATION			ADJUST_DISPLAY_PLL_PARAMETERS
1756 
1757 typedef struct _ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3
1758 {
1759 	USHORT usPixelClock;                    // target pixel clock
1760 	UCHAR ucTransmitterID;                  // GPU transmitter id defined in objectid.h
1761 	UCHAR ucEncodeMode;                     // encoder mode: CRT, LVDS, DP, TMDS or HDMI
1762   UCHAR ucDispPllConfig;                 // display pll configure parameter defined as following DISPPLL_CONFIG_XXXX
1763   UCHAR ucExtTransmitterID;               // external encoder id.
1764 	UCHAR ucReserved[2];
1765 }ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3;
1766 
1767 // usDispPllConfig v1.2 for RoadRunner
1768 #define DISPPLL_CONFIG_DVO_RATE_SEL                0x0001     // need only when ucTransmitterID = DVO
1769 #define DISPPLL_CONFIG_DVO_DDR_SPEED               0x0000     // need only when ucTransmitterID = DVO
1770 #define DISPPLL_CONFIG_DVO_SDR_SPEED               0x0001     // need only when ucTransmitterID = DVO
1771 #define DISPPLL_CONFIG_DVO_OUTPUT_SEL              0x000c     // need only when ucTransmitterID = DVO
1772 #define DISPPLL_CONFIG_DVO_LOW12BIT                0x0000     // need only when ucTransmitterID = DVO
1773 #define DISPPLL_CONFIG_DVO_UPPER12BIT              0x0004     // need only when ucTransmitterID = DVO
1774 #define DISPPLL_CONFIG_DVO_24BIT                   0x0008     // need only when ucTransmitterID = DVO
1775 #define DISPPLL_CONFIG_SS_ENABLE                   0x0010     // Only used when ucEncoderMode = DP or LVDS
1776 #define DISPPLL_CONFIG_COHERENT_MODE               0x0020     // Only used when ucEncoderMode = TMDS or HDMI
1777 #define DISPPLL_CONFIG_DUAL_LINK                   0x0040     // Only used when ucEncoderMode = TMDS or LVDS
1778 
1779 
1780 typedef struct _ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3
1781 {
1782   ULONG ulDispPllFreq;                 // return display PPLL freq which is used to generate the pixclock, and related idclk, symclk etc
1783   UCHAR ucRefDiv;                      // if it is none-zero, it is used to be calculated the other ppll parameter fb_divider and post_div ( if it is not given )
1784   UCHAR ucPostDiv;                     // if it is none-zero, it is used to be calculated the other ppll parameter fb_divider
1785   UCHAR ucReserved[2];
1786 }ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3;
1787 
1788 typedef struct _ADJUST_DISPLAY_PLL_PS_ALLOCATION_V3
1789 {
1790   union
1791   {
1792     ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3  sInput;
1793     ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3 sOutput;
1794   };
1795 } ADJUST_DISPLAY_PLL_PS_ALLOCATION_V3;
1796 
1797 /****************************************************************************/
1798 // Structures used by EnableYUVTable
1799 /****************************************************************************/
1800 typedef struct _ENABLE_YUV_PARAMETERS
1801 {
1802   UCHAR ucEnable;                     // ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB)
1803   UCHAR ucCRTC;                       // Which CRTC needs this YUV or RGB format
1804   UCHAR ucPadding[2];
1805 }ENABLE_YUV_PARAMETERS;
1806 #define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS
1807 
1808 /****************************************************************************/
1809 // Structures used by GetMemoryClockTable
1810 /****************************************************************************/
1811 typedef struct _GET_MEMORY_CLOCK_PARAMETERS
1812 {
1813   ULONG ulReturnMemoryClock;          // current memory speed in 10KHz unit
1814 } GET_MEMORY_CLOCK_PARAMETERS;
1815 #define GET_MEMORY_CLOCK_PS_ALLOCATION  GET_MEMORY_CLOCK_PARAMETERS
1816 
1817 /****************************************************************************/
1818 // Structures used by GetEngineClockTable
1819 /****************************************************************************/
1820 typedef struct _GET_ENGINE_CLOCK_PARAMETERS
1821 {
1822   ULONG ulReturnEngineClock;          // current engine speed in 10KHz unit
1823 } GET_ENGINE_CLOCK_PARAMETERS;
1824 #define GET_ENGINE_CLOCK_PS_ALLOCATION  GET_ENGINE_CLOCK_PARAMETERS
1825 
1826 /****************************************************************************/
1827 // Following Structures and constant may be obsolete
1828 /****************************************************************************/
1829 //Maxium 8 bytes,the data read in will be placed in the parameter space.
1830 //Read operaion successeful when the paramter space is non-zero, otherwise read operation failed
1831 typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
1832 {
1833   USHORT    usPrescale;         //Ratio between Engine clock and I2C clock
1834   USHORT    usVRAMAddress;      //Address in Frame Buffer where to pace raw EDID
1835   USHORT    usStatus;           //When use output: lower byte EDID checksum, high byte hardware status
1836                                 //WHen use input:  lower byte as 'byte to read':currently limited to 128byte or 1byte
1837   UCHAR     ucSlaveAddr;        //Read from which slave
1838   UCHAR     ucLineNumber;       //Read from which HW assisted line
1839 }READ_EDID_FROM_HW_I2C_DATA_PARAMETERS;
1840 #define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION  READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
1841 
1842 
1843 #define  ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE                  0
1844 #define  ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES              1
1845 #define  ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK       2
1846 #define  ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK  3
1847 #define  ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK       4
1848 
1849 typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
1850 {
1851   USHORT    usPrescale;         //Ratio between Engine clock and I2C clock
1852   USHORT    usByteOffset;       //Write to which byte
1853                                 //Upper portion of usByteOffset is Format of data
1854                                 //1bytePS+offsetPS
1855                                 //2bytesPS+offsetPS
1856                                 //blockID+offsetPS
1857                                 //blockID+offsetID
1858                                 //blockID+counterID+offsetID
1859   UCHAR     ucData;             //PS data1
1860   UCHAR     ucStatus;           //Status byte 1=success, 2=failure, Also is used as PS data2
1861   UCHAR     ucSlaveAddr;        //Write to which slave
1862   UCHAR     ucLineNumber;       //Write from which HW assisted line
1863 }WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS;
1864 
1865 #define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION  WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
1866 
1867 typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS
1868 {
1869   USHORT    usPrescale;         //Ratio between Engine clock and I2C clock
1870   UCHAR     ucSlaveAddr;        //Write to which slave
1871   UCHAR     ucLineNumber;       //Write from which HW assisted line
1872 }SET_UP_HW_I2C_DATA_PARAMETERS;
1873 
1874 
1875 /**************************************************************************/
1876 #define SPEED_FAN_CONTROL_PS_ALLOCATION   WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
1877 
1878 
1879 /****************************************************************************/
1880 // Structures used by PowerConnectorDetectionTable
1881 /****************************************************************************/
1882 typedef struct	_POWER_CONNECTOR_DETECTION_PARAMETERS
1883 {
1884   UCHAR   ucPowerConnectorStatus;      //Used for return value 0: detected, 1:not detected
1885 	UCHAR   ucPwrBehaviorId;
1886 	USHORT	usPwrBudget;								 //how much power currently boot to in unit of watt
1887 }POWER_CONNECTOR_DETECTION_PARAMETERS;
1888 
1889 typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION
1890 {
1891   UCHAR   ucPowerConnectorStatus;      //Used for return value 0: detected, 1:not detected
1892 	UCHAR   ucReserved;
1893 	USHORT	usPwrBudget;								 //how much power currently boot to in unit of watt
1894   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION    sReserved;
1895 }POWER_CONNECTOR_DETECTION_PS_ALLOCATION;
1896 
1897 /****************************LVDS SS Command Table Definitions**********************/
1898 
1899 /****************************************************************************/
1900 // Structures used by EnableSpreadSpectrumOnPPLLTable
1901 /****************************************************************************/
1902 typedef struct	_ENABLE_LVDS_SS_PARAMETERS
1903 {
1904   USHORT  usSpreadSpectrumPercentage;
1905   UCHAR   ucSpreadSpectrumType;           //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
1906   UCHAR   ucSpreadSpectrumStepSize_Delay; //bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY
1907   UCHAR   ucEnable;                       //ATOM_ENABLE or ATOM_DISABLE
1908   UCHAR   ucPadding[3];
1909 }ENABLE_LVDS_SS_PARAMETERS;
1910 
1911 //ucTableFormatRevision=1,ucTableContentRevision=2
1912 typedef struct	_ENABLE_LVDS_SS_PARAMETERS_V2
1913 {
1914   USHORT  usSpreadSpectrumPercentage;
1915   UCHAR   ucSpreadSpectrumType;           //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
1916   UCHAR   ucSpreadSpectrumStep;           //
1917   UCHAR   ucEnable;                       //ATOM_ENABLE or ATOM_DISABLE
1918   UCHAR   ucSpreadSpectrumDelay;
1919   UCHAR   ucSpreadSpectrumRange;
1920   UCHAR   ucPadding;
1921 }ENABLE_LVDS_SS_PARAMETERS_V2;
1922 
1923 //This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS.
1924 typedef struct	_ENABLE_SPREAD_SPECTRUM_ON_PPLL
1925 {
1926   USHORT  usSpreadSpectrumPercentage;
1927   UCHAR   ucSpreadSpectrumType;           // Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
1928   UCHAR   ucSpreadSpectrumStep;           //
1929   UCHAR   ucEnable;                       // ATOM_ENABLE or ATOM_DISABLE
1930   UCHAR   ucSpreadSpectrumDelay;
1931   UCHAR   ucSpreadSpectrumRange;
1932   UCHAR   ucPpll;												  // ATOM_PPLL1/ATOM_PPLL2
1933 }ENABLE_SPREAD_SPECTRUM_ON_PPLL;
1934 
1935 typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2
1936 {
1937   USHORT  usSpreadSpectrumPercentage;
1938   UCHAR   ucSpreadSpectrumType;	        // Bit[0]: 0-Down Spread,1-Center Spread.
1939                                         // Bit[1]: 1-Ext. 0-Int.
1940                                         // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL
1941                                         // Bits[7:4] reserved
1942   UCHAR   ucEnable;	                    // ATOM_ENABLE or ATOM_DISABLE
1943   USHORT  usSpreadSpectrumAmount;      	// Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8]
1944   USHORT  usSpreadSpectrumStep;	        // SS_STEP_SIZE_DSFRAC
1945 }ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2;
1946 
1947 #define ATOM_PPLL_SS_TYPE_V2_DOWN_SPREAD      0x00
1948 #define ATOM_PPLL_SS_TYPE_V2_CENTRE_SPREAD    0x01
1949 #define ATOM_PPLL_SS_TYPE_V2_EXT_SPREAD       0x02
1950 #define ATOM_PPLL_SS_TYPE_V2_PPLL_SEL_MASK    0x0c
1951 #define ATOM_PPLL_SS_TYPE_V2_P1PLL            0x00
1952 #define ATOM_PPLL_SS_TYPE_V2_P2PLL            0x04
1953 #define ATOM_PPLL_SS_TYPE_V2_DCPLL            0x08
1954 #define ATOM_PPLL_SS_AMOUNT_V2_FBDIV_MASK     0x00FF
1955 #define ATOM_PPLL_SS_AMOUNT_V2_FBDIV_SHIFT    0
1956 #define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_MASK     0x0F00
1957 #define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_SHIFT    8
1958 
1959 // Used by DCE5.0
1960  typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3
1961 {
1962   USHORT  usSpreadSpectrumAmountFrac;   // SS_AMOUNT_DSFRAC New in DCE5.0
1963   UCHAR   ucSpreadSpectrumType;	        // Bit[0]: 0-Down Spread,1-Center Spread.
1964                                         // Bit[1]: 1-Ext. 0-Int.
1965                                         // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL
1966                                         // Bits[7:4] reserved
1967   UCHAR   ucEnable;	                    // ATOM_ENABLE or ATOM_DISABLE
1968   USHORT  usSpreadSpectrumAmount;      	// Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8]
1969   USHORT  usSpreadSpectrumStep;	        // SS_STEP_SIZE_DSFRAC
1970 }ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3;
1971 
1972 #define ATOM_PPLL_SS_TYPE_V3_DOWN_SPREAD      0x00
1973 #define ATOM_PPLL_SS_TYPE_V3_CENTRE_SPREAD    0x01
1974 #define ATOM_PPLL_SS_TYPE_V3_EXT_SPREAD       0x02
1975 #define ATOM_PPLL_SS_TYPE_V3_PPLL_SEL_MASK    0x0c
1976 #define ATOM_PPLL_SS_TYPE_V3_P1PLL            0x00
1977 #define ATOM_PPLL_SS_TYPE_V3_P2PLL            0x04
1978 #define ATOM_PPLL_SS_TYPE_V3_DCPLL            0x08
1979 #define ATOM_PPLL_SS_TYPE_V3_P0PLL            ATOM_PPLL_SS_TYPE_V3_DCPLL
1980 #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK     0x00FF
1981 #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT    0
1982 #define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK     0x0F00
1983 #define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_SHIFT    8
1984 
1985 #define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION  ENABLE_SPREAD_SPECTRUM_ON_PPLL
1986 
1987 /**************************************************************************/
1988 
1989 typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION
1990 {
1991   PIXEL_CLOCK_PARAMETERS sPCLKInput;
1992   ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved;//Caller doesn't need to init this portion
1993 }SET_PIXEL_CLOCK_PS_ALLOCATION;
1994 
1995 #define ENABLE_VGA_RENDER_PS_ALLOCATION   SET_PIXEL_CLOCK_PS_ALLOCATION
1996 
1997 /****************************************************************************/
1998 // Structures used by ###
1999 /****************************************************************************/
2000 typedef struct	_MEMORY_TRAINING_PARAMETERS
2001 {
2002   ULONG ulTargetMemoryClock;          //In 10Khz unit
2003 }MEMORY_TRAINING_PARAMETERS;
2004 #define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS
2005 
2006 
2007 /****************************LVDS and other encoder command table definitions **********************/
2008 
2009 
2010 /****************************************************************************/
2011 // Structures used by LVDSEncoderControlTable   (Before DCE30)
2012 //                    LVTMAEncoderControlTable  (Before DCE30)
2013 //                    TMDSAEncoderControlTable  (Before DCE30)
2014 /****************************************************************************/
2015 typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS
2016 {
2017   USHORT usPixelClock;  // in 10KHz; for bios convenient
2018   UCHAR  ucMisc;        // bit0=0: Enable single link
2019                         //     =1: Enable dual link
2020                         // Bit1=0: 666RGB
2021                         //     =1: 888RGB
2022   UCHAR  ucAction;      // 0: turn off encoder
2023                         // 1: setup and turn on encoder
2024 }LVDS_ENCODER_CONTROL_PARAMETERS;
2025 
2026 #define LVDS_ENCODER_CONTROL_PS_ALLOCATION  LVDS_ENCODER_CONTROL_PARAMETERS
2027 
2028 #define TMDS1_ENCODER_CONTROL_PARAMETERS    LVDS_ENCODER_CONTROL_PARAMETERS
2029 #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS
2030 
2031 #define TMDS2_ENCODER_CONTROL_PARAMETERS    TMDS1_ENCODER_CONTROL_PARAMETERS
2032 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS
2033 
2034 
2035 //ucTableFormatRevision=1,ucTableContentRevision=2
2036 typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2
2037 {
2038   USHORT usPixelClock;  // in 10KHz; for bios convenient
2039   UCHAR  ucMisc;        // see PANEL_ENCODER_MISC_xx defintions below
2040   UCHAR  ucAction;      // 0: turn off encoder
2041                         // 1: setup and turn on encoder
2042   UCHAR  ucTruncate;    // bit0=0: Disable truncate
2043                         //     =1: Enable truncate
2044                         // bit4=0: 666RGB
2045                         //     =1: 888RGB
2046   UCHAR  ucSpatial;     // bit0=0: Disable spatial dithering
2047                         //     =1: Enable spatial dithering
2048                         // bit4=0: 666RGB
2049                         //     =1: 888RGB
2050   UCHAR  ucTemporal;    // bit0=0: Disable temporal dithering
2051                         //     =1: Enable temporal dithering
2052                         // bit4=0: 666RGB
2053                         //     =1: 888RGB
2054                         // bit5=0: Gray level 2
2055                         //     =1: Gray level 4
2056   UCHAR  ucFRC;         // bit4=0: 25FRC_SEL pattern E
2057                         //     =1: 25FRC_SEL pattern F
2058                         // bit6:5=0: 50FRC_SEL pattern A
2059                         //       =1: 50FRC_SEL pattern B
2060                         //       =2: 50FRC_SEL pattern C
2061                         //       =3: 50FRC_SEL pattern D
2062                         // bit7=0: 75FRC_SEL pattern E
2063                         //     =1: 75FRC_SEL pattern F
2064 }LVDS_ENCODER_CONTROL_PARAMETERS_V2;
2065 
2066 #define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2  LVDS_ENCODER_CONTROL_PARAMETERS_V2
2067 
2068 #define TMDS1_ENCODER_CONTROL_PARAMETERS_V2    LVDS_ENCODER_CONTROL_PARAMETERS_V2
2069 #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
2070 
2071 #define TMDS2_ENCODER_CONTROL_PARAMETERS_V2    TMDS1_ENCODER_CONTROL_PARAMETERS_V2
2072 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2
2073 
2074 #define LVDS_ENCODER_CONTROL_PARAMETERS_V3     LVDS_ENCODER_CONTROL_PARAMETERS_V2
2075 #define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3  LVDS_ENCODER_CONTROL_PARAMETERS_V3
2076 
2077 #define TMDS1_ENCODER_CONTROL_PARAMETERS_V3    LVDS_ENCODER_CONTROL_PARAMETERS_V3
2078 #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3
2079 
2080 #define TMDS2_ENCODER_CONTROL_PARAMETERS_V3    LVDS_ENCODER_CONTROL_PARAMETERS_V3
2081 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3
2082 
2083 /****************************************************************************/
2084 // Structures used by ###
2085 /****************************************************************************/
2086 typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS
2087 {
2088   UCHAR    ucEnable;            // Enable or Disable External TMDS encoder
2089   UCHAR    ucMisc;              // Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB}
2090   UCHAR    ucPadding[2];
2091 }ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS;
2092 
2093 typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION
2094 {
2095   ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS    sXTmdsEncoder;
2096   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION   sReserved;     //Caller doesn't need to init this portion
2097 }ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION;
2098 
2099 #define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2  LVDS_ENCODER_CONTROL_PARAMETERS_V2
2100 
2101 typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2
2102 {
2103   ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2    sXTmdsEncoder;
2104   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION      sReserved;     //Caller doesn't need to init this portion
2105 }ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2;
2106 
2107 typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION
2108 {
2109   DIG_ENCODER_CONTROL_PARAMETERS            sDigEncoder;
2110   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
2111 }EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION;
2112 
2113 /****************************************************************************/
2114 // Structures used by DVOEncoderControlTable
2115 /****************************************************************************/
2116 //ucTableFormatRevision=1,ucTableContentRevision=3
2117 
2118 //ucDVOConfig:
2119 #define DVO_ENCODER_CONFIG_RATE_SEL							0x01
2120 #define DVO_ENCODER_CONFIG_DDR_SPEED						0x00
2121 #define DVO_ENCODER_CONFIG_SDR_SPEED						0x01
2122 #define DVO_ENCODER_CONFIG_OUTPUT_SEL						0x0c
2123 #define DVO_ENCODER_CONFIG_LOW12BIT							0x00
2124 #define DVO_ENCODER_CONFIG_UPPER12BIT						0x04
2125 #define DVO_ENCODER_CONFIG_24BIT								0x08
2126 
2127 typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3
2128 {
2129   USHORT usPixelClock;
2130   UCHAR  ucDVOConfig;
2131   UCHAR  ucAction;														//ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
2132   UCHAR  ucReseved[4];
2133 }DVO_ENCODER_CONTROL_PARAMETERS_V3;
2134 #define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3	DVO_ENCODER_CONTROL_PARAMETERS_V3
2135 
2136 typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V1_4
2137 {
2138   USHORT usPixelClock;
2139   UCHAR  ucDVOConfig;
2140   UCHAR  ucAction;														//ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
2141   UCHAR  ucBitPerColor;                       //please refer to definition of PANEL_xBIT_PER_COLOR
2142   UCHAR  ucReseved[3];
2143 }DVO_ENCODER_CONTROL_PARAMETERS_V1_4;
2144 #define DVO_ENCODER_CONTROL_PS_ALLOCATION_V1_4	DVO_ENCODER_CONTROL_PARAMETERS_V1_4
2145 
2146 
2147 //ucTableFormatRevision=1
2148 //ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for
2149 // bit1=0: non-coherent mode
2150 //     =1: coherent mode
2151 
2152 //==========================================================================================
2153 //Only change is here next time when changing encoder parameter definitions again!
2154 #define LVDS_ENCODER_CONTROL_PARAMETERS_LAST     LVDS_ENCODER_CONTROL_PARAMETERS_V3
2155 #define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST  LVDS_ENCODER_CONTROL_PARAMETERS_LAST
2156 
2157 #define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST    LVDS_ENCODER_CONTROL_PARAMETERS_V3
2158 #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST
2159 
2160 #define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST    LVDS_ENCODER_CONTROL_PARAMETERS_V3
2161 #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST
2162 
2163 #define DVO_ENCODER_CONTROL_PARAMETERS_LAST      DVO_ENCODER_CONTROL_PARAMETERS
2164 #define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST   DVO_ENCODER_CONTROL_PS_ALLOCATION
2165 
2166 //==========================================================================================
2167 #define PANEL_ENCODER_MISC_DUAL                0x01
2168 #define PANEL_ENCODER_MISC_COHERENT            0x02
2169 #define	PANEL_ENCODER_MISC_TMDS_LINKB					 0x04
2170 #define	PANEL_ENCODER_MISC_HDMI_TYPE					 0x08
2171 
2172 #define PANEL_ENCODER_ACTION_DISABLE           ATOM_DISABLE
2173 #define PANEL_ENCODER_ACTION_ENABLE            ATOM_ENABLE
2174 #define PANEL_ENCODER_ACTION_COHERENTSEQ       (ATOM_ENABLE+1)
2175 
2176 #define PANEL_ENCODER_TRUNCATE_EN              0x01
2177 #define PANEL_ENCODER_TRUNCATE_DEPTH           0x10
2178 #define PANEL_ENCODER_SPATIAL_DITHER_EN        0x01
2179 #define PANEL_ENCODER_SPATIAL_DITHER_DEPTH     0x10
2180 #define PANEL_ENCODER_TEMPORAL_DITHER_EN       0x01
2181 #define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH    0x10
2182 #define PANEL_ENCODER_TEMPORAL_LEVEL_4         0x20
2183 #define PANEL_ENCODER_25FRC_MASK               0x10
2184 #define PANEL_ENCODER_25FRC_E                  0x00
2185 #define PANEL_ENCODER_25FRC_F                  0x10
2186 #define PANEL_ENCODER_50FRC_MASK               0x60
2187 #define PANEL_ENCODER_50FRC_A                  0x00
2188 #define PANEL_ENCODER_50FRC_B                  0x20
2189 #define PANEL_ENCODER_50FRC_C                  0x40
2190 #define PANEL_ENCODER_50FRC_D                  0x60
2191 #define PANEL_ENCODER_75FRC_MASK               0x80
2192 #define PANEL_ENCODER_75FRC_E                  0x00
2193 #define PANEL_ENCODER_75FRC_F                  0x80
2194 
2195 /****************************************************************************/
2196 // Structures used by SetVoltageTable
2197 /****************************************************************************/
2198 #define SET_VOLTAGE_TYPE_ASIC_VDDC             1
2199 #define SET_VOLTAGE_TYPE_ASIC_MVDDC            2
2200 #define SET_VOLTAGE_TYPE_ASIC_MVDDQ            3
2201 #define SET_VOLTAGE_TYPE_ASIC_VDDCI            4
2202 #define SET_VOLTAGE_INIT_MODE                  5
2203 #define SET_VOLTAGE_GET_MAX_VOLTAGE            6					//Gets the Max. voltage for the soldered Asic
2204 
2205 #define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE       0x1
2206 #define SET_ASIC_VOLTAGE_MODE_SOURCE_A         0x2
2207 #define SET_ASIC_VOLTAGE_MODE_SOURCE_B         0x4
2208 
2209 #define	SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE      0x0
2210 #define	SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL      0x1
2211 #define	SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK     0x2
2212 
2213 typedef struct	_SET_VOLTAGE_PARAMETERS
2214 {
2215   UCHAR    ucVoltageType;               // To tell which voltage to set up, VDDC/MVDDC/MVDDQ
2216   UCHAR    ucVoltageMode;               // To set all, to set source A or source B or ...
2217   UCHAR    ucVoltageIndex;              // An index to tell which voltage level
2218   UCHAR    ucReserved;
2219 }SET_VOLTAGE_PARAMETERS;
2220 
2221 typedef struct	_SET_VOLTAGE_PARAMETERS_V2
2222 {
2223   UCHAR    ucVoltageType;               // To tell which voltage to set up, VDDC/MVDDC/MVDDQ
2224   UCHAR    ucVoltageMode;               // Not used, maybe use for state machine for differen power mode
2225   USHORT   usVoltageLevel;              // real voltage level
2226 }SET_VOLTAGE_PARAMETERS_V2;
2227 
2228 // used by both SetVoltageTable v1.3 and v1.4
2229 typedef struct	_SET_VOLTAGE_PARAMETERS_V1_3
2230 {
2231   UCHAR    ucVoltageType;               // To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
2232   UCHAR    ucVoltageMode;               // Indicate action: Set voltage level
2233   USHORT   usVoltageLevel;              // real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. )
2234 }SET_VOLTAGE_PARAMETERS_V1_3;
2235 
2236 //ucVoltageType
2237 #define VOLTAGE_TYPE_VDDC                    1
2238 #define VOLTAGE_TYPE_MVDDC                   2
2239 #define VOLTAGE_TYPE_MVDDQ                   3
2240 #define VOLTAGE_TYPE_VDDCI                   4
2241 
2242 //SET_VOLTAGE_PARAMETERS_V3.ucVoltageMode
2243 #define ATOM_SET_VOLTAGE                     0        //Set voltage Level
2244 #define ATOM_INIT_VOLTAGE_REGULATOR          3        //Init Regulator
2245 #define ATOM_SET_VOLTAGE_PHASE               4        //Set Vregulator Phase, only for SVID/PVID regulator
2246 #define ATOM_GET_MAX_VOLTAGE                 6        //Get Max Voltage, not used from SetVoltageTable v1.3
2247 #define ATOM_GET_VOLTAGE_LEVEL               6        //Get Voltage level from vitual voltage ID, not used for SetVoltage v1.4
2248 #define ATOM_GET_LEAKAGE_ID                  8        //Get Leakage Voltage Id ( starting from SMU7x IP ), SetVoltage v1.4
2249 
2250 // define vitual voltage id in usVoltageLevel
2251 #define ATOM_VIRTUAL_VOLTAGE_ID0             0xff01
2252 #define ATOM_VIRTUAL_VOLTAGE_ID1             0xff02
2253 #define ATOM_VIRTUAL_VOLTAGE_ID2             0xff03
2254 #define ATOM_VIRTUAL_VOLTAGE_ID3             0xff04
2255 #define ATOM_VIRTUAL_VOLTAGE_ID4             0xff05
2256 #define ATOM_VIRTUAL_VOLTAGE_ID5             0xff06
2257 #define ATOM_VIRTUAL_VOLTAGE_ID6             0xff07
2258 #define ATOM_VIRTUAL_VOLTAGE_ID7             0xff08
2259 
2260 typedef struct _SET_VOLTAGE_PS_ALLOCATION
2261 {
2262   SET_VOLTAGE_PARAMETERS sASICSetVoltage;
2263   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
2264 }SET_VOLTAGE_PS_ALLOCATION;
2265 
2266 // New Added from SI for GetVoltageInfoTable, input parameter structure
2267 typedef struct  _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1
2268 {
2269   UCHAR    ucVoltageType;               // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
2270   UCHAR    ucVoltageMode;               // Input: Indicate action: Get voltage info
2271   USHORT   usVoltageLevel;              // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id
2272   ULONG    ulReserved;
2273 }GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1;
2274 
2275 // New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_VID
2276 typedef struct  _GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1
2277 {
2278   ULONG    ulVotlageGpioState;
2279   ULONG    ulVoltageGPioMask;
2280 }GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1;
2281 
2282 // New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_STATEx_LEAKAGE_VID
2283 typedef struct  _GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1
2284 {
2285   USHORT   usVoltageLevel;
2286   USHORT   usVoltageId;                                  // Voltage Id programmed in Voltage Regulator
2287   ULONG    ulReseved;
2288 }GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1;
2289 
2290 
2291 // GetVoltageInfo v1.1 ucVoltageMode
2292 #define	ATOM_GET_VOLTAGE_VID                0x00
2293 #define ATOM_GET_VOTLAGE_INIT_SEQ           0x03
2294 #define ATOM_GET_VOLTTAGE_PHASE_PHASE_VID   0x04
2295 #define ATOM_GET_VOLTAGE_SVID2              0x07        //Get SVI2 Regulator Info
2296 
2297 // for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state
2298 #define ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10
2299 // for SI, this state map to 0xff01 voltage state in Power Play table, which is performance state
2300 #define	ATOM_GET_VOLTAGE_STATE1_LEAKAGE_VID 0x11
2301 
2302 #define	ATOM_GET_VOLTAGE_STATE2_LEAKAGE_VID 0x12
2303 #define	ATOM_GET_VOLTAGE_STATE3_LEAKAGE_VID 0x13
2304 
2305 // New Added from CI Hawaii for GetVoltageInfoTable, input parameter structure
2306 typedef struct  _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2
2307 {
2308   UCHAR    ucVoltageType;               // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
2309   UCHAR    ucVoltageMode;               // Input: Indicate action: Get voltage info
2310   USHORT   usVoltageLevel;              // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id
2311   ULONG    ulSCLKFreq;                  // Input: when ucVoltageMode= ATOM_GET_VOLTAGE_EVV_VOLTAGE, DPM state SCLK frequency, Define in PPTable SCLK/Voltage dependence table
2312 }GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2;
2313 
2314 // New in GetVoltageInfo v1.2 ucVoltageMode
2315 #define ATOM_GET_VOLTAGE_EVV_VOLTAGE        0x09
2316 
2317 // New Added from CI Hawaii for EVV feature
2318 typedef struct  _GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2
2319 {
2320   USHORT   usVoltageLevel;                               // real voltage level in unit of mv
2321   USHORT   usVoltageId;                                  // Voltage Id programmed in Voltage Regulator
2322   ULONG    ulReseved;
2323 }GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2;
2324 
2325 /****************************************************************************/
2326 // Structures used by TVEncoderControlTable
2327 /****************************************************************************/
2328 typedef struct _TV_ENCODER_CONTROL_PARAMETERS
2329 {
2330   USHORT usPixelClock;                // in 10KHz; for bios convenient
2331   UCHAR  ucTvStandard;                // See definition "ATOM_TV_NTSC ..."
2332   UCHAR  ucAction;                    // 0: turn off encoder
2333                                       // 1: setup and turn on encoder
2334 }TV_ENCODER_CONTROL_PARAMETERS;
2335 
2336 typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION
2337 {
2338   TV_ENCODER_CONTROL_PARAMETERS sTVEncoder;
2339   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION    sReserved; // Don't set this one
2340 }TV_ENCODER_CONTROL_PS_ALLOCATION;
2341 
2342 //==============================Data Table Portion====================================
2343 
2344 /****************************************************************************/
2345 // Structure used in Data.mtb
2346 /****************************************************************************/
2347 typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
2348 {
2349   USHORT        UtilityPipeLine;	        // Offest for the utility to get parser info,Don't change this position!
2350   USHORT        MultimediaCapabilityInfo; // Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios
2351   USHORT        MultimediaConfigInfo;     // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios
2352   USHORT        StandardVESA_Timing;      // Only used by Bios
2353   USHORT        FirmwareInfo;             // Shared by various SW components,latest version 1.4
2354   USHORT        PaletteData;              // Only used by BIOS
2355   USHORT        LCD_Info;                 // Shared by various SW components,latest version 1.3, was called LVDS_Info
2356   USHORT        DIGTransmitterInfo;       // Internal used by VBIOS only version 3.1
2357   USHORT        AnalogTV_Info;            // Shared by various SW components,latest version 1.1
2358   USHORT        SupportedDevicesInfo;     // Will be obsolete from R600
2359   USHORT        GPIO_I2C_Info;            // Shared by various SW components,latest version 1.2 will be used from R600
2360   USHORT        VRAM_UsageByFirmware;     // Shared by various SW components,latest version 1.3 will be used from R600
2361   USHORT        GPIO_Pin_LUT;             // Shared by various SW components,latest version 1.1
2362   USHORT        VESA_ToInternalModeLUT;   // Only used by Bios
2363   USHORT        ComponentVideoInfo;       // Shared by various SW components,latest version 2.1 will be used from R600
2364   USHORT        PowerPlayInfo;            // Shared by various SW components,latest version 2.1,new design from R600
2365   USHORT        CompassionateData;        // Will be obsolete from R600
2366   USHORT        SaveRestoreInfo;          // Only used by Bios
2367   USHORT        PPLL_SS_Info;             // Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info
2368   USHORT        OemInfo;                  // Defined and used by external SW, should be obsolete soon
2369   USHORT        XTMDS_Info;               // Will be obsolete from R600
2370   USHORT        MclkSS_Info;              // Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used
2371   USHORT        Object_Header;            // Shared by various SW components,latest version 1.1
2372   USHORT        IndirectIOAccess;         // Only used by Bios,this table position can't change at all!!
2373   USHORT        MC_InitParameter;         // Only used by command table
2374   USHORT        ASIC_VDDC_Info;						// Will be obsolete from R600
2375   USHORT        ASIC_InternalSS_Info;			// New tabel name from R600, used to be called "ASIC_MVDDC_Info"
2376   USHORT        TV_VideoMode;							// Only used by command table
2377   USHORT        VRAM_Info;								// Only used by command table, latest version 1.3
2378   USHORT        MemoryTrainingInfo;				// Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1
2379   USHORT        IntegratedSystemInfo;			// Shared by various SW components
2380   USHORT        ASIC_ProfilingInfo;				// New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600
2381   USHORT        VoltageObjectInfo;				// Shared by various SW components, latest version 1.1
2382 	USHORT				PowerSourceInfo;					// Shared by various SW components, latest versoin 1.1
2383 }ATOM_MASTER_LIST_OF_DATA_TABLES;
2384 
2385 typedef struct _ATOM_MASTER_DATA_TABLE
2386 {
2387   ATOM_COMMON_TABLE_HEADER sHeader;
2388   ATOM_MASTER_LIST_OF_DATA_TABLES   ListOfDataTables;
2389 }ATOM_MASTER_DATA_TABLE;
2390 
2391 // For backward compatible
2392 #define LVDS_Info                LCD_Info
2393 #define DAC_Info                 PaletteData
2394 #define TMDS_Info                DIGTransmitterInfo
2395 
2396 /****************************************************************************/
2397 // Structure used in MultimediaCapabilityInfoTable
2398 /****************************************************************************/
2399 typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO
2400 {
2401   ATOM_COMMON_TABLE_HEADER sHeader;
2402   ULONG                    ulSignature;      // HW info table signature string "$ATI"
2403   UCHAR                    ucI2C_Type;       // I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc)
2404   UCHAR                    ucTV_OutInfo;     // Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7)
2405   UCHAR                    ucVideoPortInfo;  // Provides the video port capabilities
2406   UCHAR                    ucHostPortInfo;   // Provides host port configuration information
2407 }ATOM_MULTIMEDIA_CAPABILITY_INFO;
2408 
2409 /****************************************************************************/
2410 // Structure used in MultimediaConfigInfoTable
2411 /****************************************************************************/
2412 typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
2413 {
2414   ATOM_COMMON_TABLE_HEADER sHeader;
2415   ULONG                    ulSignature;      // MM info table signature sting "$MMT"
2416   UCHAR                    ucTunerInfo;      // Type of tuner installed on the adapter (4:0) and video input for tuner (7:5)
2417   UCHAR                    ucAudioChipInfo;  // List the audio chip type (3:0) product type (4) and OEM revision (7:5)
2418   UCHAR                    ucProductID;      // Defines as OEM ID or ATI board ID dependent on product type setting
2419   UCHAR                    ucMiscInfo1;      // Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7)
2420   UCHAR                    ucMiscInfo2;      // I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6)
2421   UCHAR                    ucMiscInfo3;      // Video Decoder Type (3:0) Video In Standard/Crystal (7:4)
2422   UCHAR                    ucMiscInfo4;      // Video Decoder Host Config (2:0) reserved (7:3)
2423   UCHAR                    ucVideoInput0Info;// Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2424   UCHAR                    ucVideoInput1Info;// Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2425   UCHAR                    ucVideoInput2Info;// Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2426   UCHAR                    ucVideoInput3Info;// Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2427   UCHAR                    ucVideoInput4Info;// Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
2428 }ATOM_MULTIMEDIA_CONFIG_INFO;
2429 
2430 
2431 /****************************************************************************/
2432 // Structures used in FirmwareInfoTable
2433 /****************************************************************************/
2434 
2435 // usBIOSCapability Definition:
2436 // Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted;
2437 // Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported;
2438 // Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported;
2439 // Others: Reserved
2440 #define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED         0x0001
2441 #define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT            0x0002
2442 #define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT     0x0004
2443 #define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT      0x0008		// (valid from v1.1 ~v1.4):=1: memclk SS enable, =0 memclk SS disable.
2444 #define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT      0x0010		// (valid from v1.1 ~v1.4):=1: engclk SS enable, =0 engclk SS disable.
2445 #define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU         0x0020
2446 #define ATOM_BIOS_INFO_WMI_SUPPORT                  0x0040
2447 #define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM   0x0080
2448 #define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT          0x0100
2449 #define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK        0x1E00
2450 #define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000
2451 #define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE  0x4000
2452 #define ATOM_BIOS_INFO_MEMORY_CLOCK_EXT_SS_SUPPORT  0x0008		// (valid from v2.1 ): =1: memclk ss enable with external ss chip
2453 #define ATOM_BIOS_INFO_ENGINE_CLOCK_EXT_SS_SUPPORT  0x0010		// (valid from v2.1 ): =1: engclk ss enable with external ss chip
2454 
2455 #ifndef _H2INC
2456 
2457 //Please don't add or expand this bitfield structure below, this one will retire soon.!
2458 typedef struct _ATOM_FIRMWARE_CAPABILITY
2459 {
2460 #if ATOM_BIG_ENDIAN
2461   USHORT Reserved:1;
2462   USHORT SCL2Redefined:1;
2463   USHORT PostWithoutModeSet:1;
2464   USHORT HyperMemory_Size:4;
2465   USHORT HyperMemory_Support:1;
2466   USHORT PPMode_Assigned:1;
2467   USHORT WMI_SUPPORT:1;
2468   USHORT GPUControlsBL:1;
2469   USHORT EngineClockSS_Support:1;
2470   USHORT MemoryClockSS_Support:1;
2471   USHORT ExtendedDesktopSupport:1;
2472   USHORT DualCRTC_Support:1;
2473   USHORT FirmwarePosted:1;
2474 #else
2475   USHORT FirmwarePosted:1;
2476   USHORT DualCRTC_Support:1;
2477   USHORT ExtendedDesktopSupport:1;
2478   USHORT MemoryClockSS_Support:1;
2479   USHORT EngineClockSS_Support:1;
2480   USHORT GPUControlsBL:1;
2481   USHORT WMI_SUPPORT:1;
2482   USHORT PPMode_Assigned:1;
2483   USHORT HyperMemory_Support:1;
2484   USHORT HyperMemory_Size:4;
2485   USHORT PostWithoutModeSet:1;
2486   USHORT SCL2Redefined:1;
2487   USHORT Reserved:1;
2488 #endif
2489 }ATOM_FIRMWARE_CAPABILITY;
2490 
2491 typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS
2492 {
2493   ATOM_FIRMWARE_CAPABILITY sbfAccess;
2494   USHORT                   susAccess;
2495 }ATOM_FIRMWARE_CAPABILITY_ACCESS;
2496 
2497 #else
2498 
2499 typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS
2500 {
2501   USHORT                   susAccess;
2502 }ATOM_FIRMWARE_CAPABILITY_ACCESS;
2503 
2504 #endif
2505 
2506 typedef struct _ATOM_FIRMWARE_INFO
2507 {
2508   ATOM_COMMON_TABLE_HEADER        sHeader;
2509   ULONG                           ulFirmwareRevision;
2510   ULONG                           ulDefaultEngineClock;       //In 10Khz unit
2511   ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
2512   ULONG                           ulDriverTargetEngineClock;  //In 10Khz unit
2513   ULONG                           ulDriverTargetMemoryClock;  //In 10Khz unit
2514   ULONG                           ulMaxEngineClockPLL_Output; //In 10Khz unit
2515   ULONG                           ulMaxMemoryClockPLL_Output; //In 10Khz unit
2516   ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
2517   ULONG                           ulASICMaxEngineClock;       //In 10Khz unit
2518   ULONG                           ulASICMaxMemoryClock;       //In 10Khz unit
2519   UCHAR                           ucASICMaxTemperature;
2520   UCHAR                           ucPadding[3];               //Don't use them
2521   ULONG                           aulReservedForBIOS[3];      //Don't use them
2522   USHORT                          usMinEngineClockPLL_Input;  //In 10Khz unit
2523   USHORT                          usMaxEngineClockPLL_Input;  //In 10Khz unit
2524   USHORT                          usMinEngineClockPLL_Output; //In 10Khz unit
2525   USHORT                          usMinMemoryClockPLL_Input;  //In 10Khz unit
2526   USHORT                          usMaxMemoryClockPLL_Input;  //In 10Khz unit
2527   USHORT                          usMinMemoryClockPLL_Output; //In 10Khz unit
2528   USHORT                          usMaxPixelClock;            //In 10Khz unit, Max.  Pclk
2529   USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
2530   USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
2531   USHORT                          usMinPixelClockPLL_Output;  //In 10Khz unit, the definitions above can't change!!!
2532   ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2533   USHORT                          usReferenceClock;           //In 10Khz unit
2534   USHORT                          usPM_RTS_Location;          //RTS PM4 starting location in ROM in 1Kb unit
2535   UCHAR                           ucPM_RTS_StreamSize;        //RTS PM4 packets in Kb unit
2536   UCHAR                           ucDesign_ID;                //Indicate what is the board design
2537   UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
2538 }ATOM_FIRMWARE_INFO;
2539 
2540 typedef struct _ATOM_FIRMWARE_INFO_V1_2
2541 {
2542   ATOM_COMMON_TABLE_HEADER        sHeader;
2543   ULONG                           ulFirmwareRevision;
2544   ULONG                           ulDefaultEngineClock;       //In 10Khz unit
2545   ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
2546   ULONG                           ulDriverTargetEngineClock;  //In 10Khz unit
2547   ULONG                           ulDriverTargetMemoryClock;  //In 10Khz unit
2548   ULONG                           ulMaxEngineClockPLL_Output; //In 10Khz unit
2549   ULONG                           ulMaxMemoryClockPLL_Output; //In 10Khz unit
2550   ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
2551   ULONG                           ulASICMaxEngineClock;       //In 10Khz unit
2552   ULONG                           ulASICMaxMemoryClock;       //In 10Khz unit
2553   UCHAR                           ucASICMaxTemperature;
2554   UCHAR                           ucMinAllowedBL_Level;
2555   UCHAR                           ucPadding[2];               //Don't use them
2556   ULONG                           aulReservedForBIOS[2];      //Don't use them
2557   ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
2558   USHORT                          usMinEngineClockPLL_Input;  //In 10Khz unit
2559   USHORT                          usMaxEngineClockPLL_Input;  //In 10Khz unit
2560   USHORT                          usMinEngineClockPLL_Output; //In 10Khz unit
2561   USHORT                          usMinMemoryClockPLL_Input;  //In 10Khz unit
2562   USHORT                          usMaxMemoryClockPLL_Input;  //In 10Khz unit
2563   USHORT                          usMinMemoryClockPLL_Output; //In 10Khz unit
2564   USHORT                          usMaxPixelClock;            //In 10Khz unit, Max.  Pclk
2565   USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
2566   USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
2567   USHORT                          usMinPixelClockPLL_Output;  //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
2568   ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2569   USHORT                          usReferenceClock;           //In 10Khz unit
2570   USHORT                          usPM_RTS_Location;          //RTS PM4 starting location in ROM in 1Kb unit
2571   UCHAR                           ucPM_RTS_StreamSize;        //RTS PM4 packets in Kb unit
2572   UCHAR                           ucDesign_ID;                //Indicate what is the board design
2573   UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
2574 }ATOM_FIRMWARE_INFO_V1_2;
2575 
2576 typedef struct _ATOM_FIRMWARE_INFO_V1_3
2577 {
2578   ATOM_COMMON_TABLE_HEADER        sHeader;
2579   ULONG                           ulFirmwareRevision;
2580   ULONG                           ulDefaultEngineClock;       //In 10Khz unit
2581   ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
2582   ULONG                           ulDriverTargetEngineClock;  //In 10Khz unit
2583   ULONG                           ulDriverTargetMemoryClock;  //In 10Khz unit
2584   ULONG                           ulMaxEngineClockPLL_Output; //In 10Khz unit
2585   ULONG                           ulMaxMemoryClockPLL_Output; //In 10Khz unit
2586   ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
2587   ULONG                           ulASICMaxEngineClock;       //In 10Khz unit
2588   ULONG                           ulASICMaxMemoryClock;       //In 10Khz unit
2589   UCHAR                           ucASICMaxTemperature;
2590   UCHAR                           ucMinAllowedBL_Level;
2591   UCHAR                           ucPadding[2];               //Don't use them
2592   ULONG                           aulReservedForBIOS;         //Don't use them
2593   ULONG                           ul3DAccelerationEngineClock;//In 10Khz unit
2594   ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
2595   USHORT                          usMinEngineClockPLL_Input;  //In 10Khz unit
2596   USHORT                          usMaxEngineClockPLL_Input;  //In 10Khz unit
2597   USHORT                          usMinEngineClockPLL_Output; //In 10Khz unit
2598   USHORT                          usMinMemoryClockPLL_Input;  //In 10Khz unit
2599   USHORT                          usMaxMemoryClockPLL_Input;  //In 10Khz unit
2600   USHORT                          usMinMemoryClockPLL_Output; //In 10Khz unit
2601   USHORT                          usMaxPixelClock;            //In 10Khz unit, Max.  Pclk
2602   USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
2603   USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
2604   USHORT                          usMinPixelClockPLL_Output;  //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
2605   ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2606   USHORT                          usReferenceClock;           //In 10Khz unit
2607   USHORT                          usPM_RTS_Location;          //RTS PM4 starting location in ROM in 1Kb unit
2608   UCHAR                           ucPM_RTS_StreamSize;        //RTS PM4 packets in Kb unit
2609   UCHAR                           ucDesign_ID;                //Indicate what is the board design
2610   UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
2611 }ATOM_FIRMWARE_INFO_V1_3;
2612 
2613 typedef struct _ATOM_FIRMWARE_INFO_V1_4
2614 {
2615   ATOM_COMMON_TABLE_HEADER        sHeader;
2616   ULONG                           ulFirmwareRevision;
2617   ULONG                           ulDefaultEngineClock;       //In 10Khz unit
2618   ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
2619   ULONG                           ulDriverTargetEngineClock;  //In 10Khz unit
2620   ULONG                           ulDriverTargetMemoryClock;  //In 10Khz unit
2621   ULONG                           ulMaxEngineClockPLL_Output; //In 10Khz unit
2622   ULONG                           ulMaxMemoryClockPLL_Output; //In 10Khz unit
2623   ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
2624   ULONG                           ulASICMaxEngineClock;       //In 10Khz unit
2625   ULONG                           ulASICMaxMemoryClock;       //In 10Khz unit
2626   UCHAR                           ucASICMaxTemperature;
2627   UCHAR                           ucMinAllowedBL_Level;
2628   USHORT                          usBootUpVDDCVoltage;        //In MV unit
2629   USHORT                          usLcdMinPixelClockPLL_Output; // In MHz unit
2630   USHORT                          usLcdMaxPixelClockPLL_Output; // In MHz unit
2631   ULONG                           ul3DAccelerationEngineClock;//In 10Khz unit
2632   ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
2633   USHORT                          usMinEngineClockPLL_Input;  //In 10Khz unit
2634   USHORT                          usMaxEngineClockPLL_Input;  //In 10Khz unit
2635   USHORT                          usMinEngineClockPLL_Output; //In 10Khz unit
2636   USHORT                          usMinMemoryClockPLL_Input;  //In 10Khz unit
2637   USHORT                          usMaxMemoryClockPLL_Input;  //In 10Khz unit
2638   USHORT                          usMinMemoryClockPLL_Output; //In 10Khz unit
2639   USHORT                          usMaxPixelClock;            //In 10Khz unit, Max.  Pclk
2640   USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
2641   USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
2642   USHORT                          usMinPixelClockPLL_Output;  //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
2643   ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2644   USHORT                          usReferenceClock;           //In 10Khz unit
2645   USHORT                          usPM_RTS_Location;          //RTS PM4 starting location in ROM in 1Kb unit
2646   UCHAR                           ucPM_RTS_StreamSize;        //RTS PM4 packets in Kb unit
2647   UCHAR                           ucDesign_ID;                //Indicate what is the board design
2648   UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
2649 }ATOM_FIRMWARE_INFO_V1_4;
2650 
2651 //the structure below to be used from Cypress
2652 typedef struct _ATOM_FIRMWARE_INFO_V2_1
2653 {
2654   ATOM_COMMON_TABLE_HEADER        sHeader;
2655   ULONG                           ulFirmwareRevision;
2656   ULONG                           ulDefaultEngineClock;       //In 10Khz unit
2657   ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
2658   ULONG                           ulReserved1;
2659   ULONG                           ulReserved2;
2660   ULONG                           ulMaxEngineClockPLL_Output; //In 10Khz unit
2661   ULONG                           ulMaxMemoryClockPLL_Output; //In 10Khz unit
2662   ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
2663   ULONG                           ulBinaryAlteredInfo;        //Was ulASICMaxEngineClock
2664   ULONG                           ulDefaultDispEngineClkFreq; //In 10Khz unit
2665   UCHAR                           ucReserved1;                //Was ucASICMaxTemperature;
2666   UCHAR                           ucMinAllowedBL_Level;
2667   USHORT                          usBootUpVDDCVoltage;        //In MV unit
2668   USHORT                          usLcdMinPixelClockPLL_Output; // In MHz unit
2669   USHORT                          usLcdMaxPixelClockPLL_Output; // In MHz unit
2670   ULONG                           ulReserved4;                //Was ulAsicMaximumVoltage
2671   ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
2672   USHORT                          usMinEngineClockPLL_Input;  //In 10Khz unit
2673   USHORT                          usMaxEngineClockPLL_Input;  //In 10Khz unit
2674   USHORT                          usMinEngineClockPLL_Output; //In 10Khz unit
2675   USHORT                          usMinMemoryClockPLL_Input;  //In 10Khz unit
2676   USHORT                          usMaxMemoryClockPLL_Input;  //In 10Khz unit
2677   USHORT                          usMinMemoryClockPLL_Output; //In 10Khz unit
2678   USHORT                          usMaxPixelClock;            //In 10Khz unit, Max.  Pclk
2679   USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
2680   USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
2681   USHORT                          usMinPixelClockPLL_Output;  //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
2682   ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2683   USHORT                          usCoreReferenceClock;       //In 10Khz unit
2684   USHORT                          usMemoryReferenceClock;     //In 10Khz unit
2685   USHORT                          usUniphyDPModeExtClkFreq;   //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock
2686   UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
2687   UCHAR                           ucReserved4[3];
2688 }ATOM_FIRMWARE_INFO_V2_1;
2689 
2690 //the structure below to be used from NI
2691 //ucTableFormatRevision=2
2692 //ucTableContentRevision=2
2693 typedef struct _ATOM_FIRMWARE_INFO_V2_2
2694 {
2695   ATOM_COMMON_TABLE_HEADER        sHeader;
2696   ULONG                           ulFirmwareRevision;
2697   ULONG                           ulDefaultEngineClock;       //In 10Khz unit
2698   ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
2699   ULONG                           ulSPLL_OutputFreq;          //In 10Khz unit
2700   ULONG                           ulGPUPLL_OutputFreq;        //In 10Khz unit
2701   ULONG                           ulReserved1;                //Was ulMaxEngineClockPLL_Output; //In 10Khz unit*
2702   ULONG                           ulReserved2;                //Was ulMaxMemoryClockPLL_Output; //In 10Khz unit*
2703   ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
2704   ULONG                           ulBinaryAlteredInfo;        //Was ulASICMaxEngineClock  ?
2705   ULONG                           ulDefaultDispEngineClkFreq; //In 10Khz unit. This is the frequency before DCDTO, corresponding to usBootUpVDDCVoltage.
2706   UCHAR                           ucReserved3;                //Was ucASICMaxTemperature;
2707   UCHAR                           ucMinAllowedBL_Level;
2708   USHORT                          usBootUpVDDCVoltage;        //In MV unit
2709   USHORT                          usLcdMinPixelClockPLL_Output; // In MHz unit
2710   USHORT                          usLcdMaxPixelClockPLL_Output; // In MHz unit
2711   ULONG                           ulReserved4;                //Was ulAsicMaximumVoltage
2712   ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
2713   UCHAR                           ucRemoteDisplayConfig;
2714   UCHAR                           ucReserved5[3];             //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input
2715   ULONG                           ulReserved6;                //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input
2716   ULONG                           ulReserved7;                //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output
2717   USHORT                          usReserved11;               //Was usMaxPixelClock;  //In 10Khz unit, Max.  Pclk used only for DAC
2718   USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
2719   USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
2720   USHORT                          usBootUpVDDCIVoltage;       //In unit of mv; Was usMinPixelClockPLL_Output;
2721   ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
2722   USHORT                          usCoreReferenceClock;       //In 10Khz unit
2723   USHORT                          usMemoryReferenceClock;     //In 10Khz unit
2724   USHORT                          usUniphyDPModeExtClkFreq;   //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock
2725   UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
2726   UCHAR                           ucReserved9[3];
2727   USHORT                          usBootUpMVDDCVoltage;       //In unit of mv; Was usMinPixelClockPLL_Output;
2728   USHORT                          usReserved12;
2729   ULONG                           ulReserved10[3];            // New added comparing to previous version
2730 }ATOM_FIRMWARE_INFO_V2_2;
2731 
2732 #define ATOM_FIRMWARE_INFO_LAST  ATOM_FIRMWARE_INFO_V2_2
2733 
2734 
2735 // definition of ucRemoteDisplayConfig
2736 #define REMOTE_DISPLAY_DISABLE                   0x00
2737 #define REMOTE_DISPLAY_ENABLE                    0x01
2738 
2739 /****************************************************************************/
2740 // Structures used in IntegratedSystemInfoTable
2741 /****************************************************************************/
2742 #define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN      0x2
2743 #define IGP_CAP_FLAG_AC_CARD               0x4
2744 #define IGP_CAP_FLAG_SDVO_CARD             0x8
2745 #define IGP_CAP_FLAG_POSTDIV_BY_2_MODE     0x10
2746 
2747 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO
2748 {
2749   ATOM_COMMON_TABLE_HEADER        sHeader;
2750   ULONG	                          ulBootUpEngineClock;		    //in 10kHz unit
2751   ULONG	                          ulBootUpMemoryClock;		    //in 10kHz unit
2752   ULONG	                          ulMaxSystemMemoryClock;	    //in 10kHz unit
2753   ULONG	                          ulMinSystemMemoryClock;	    //in 10kHz unit
2754   UCHAR                           ucNumberOfCyclesInPeriodHi;
2755   UCHAR                           ucLCDTimingSel;             //=0:not valid.!=0 sel this timing descriptor from LCD EDID.
2756   USHORT                          usReserved1;
2757   USHORT                          usInterNBVoltageLow;        //An intermidiate PMW value to set the voltage
2758   USHORT                          usInterNBVoltageHigh;       //Another intermidiate PMW value to set the voltage
2759   ULONG	                          ulReserved[2];
2760 
2761   USHORT	                        usFSBClock;			            //In MHz unit
2762   USHORT                          usCapabilityFlag;		        //Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable
2763 																                              //Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card
2764                                                               //Bit[4]==1: P/2 mode, ==0: P/1 mode
2765   USHORT	                        usPCIENBCfgReg7;				    //bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal
2766   USHORT	                        usK8MemoryClock;            //in MHz unit
2767   USHORT	                        usK8SyncStartDelay;         //in 0.01 us unit
2768   USHORT	                        usK8DataReturnTime;         //in 0.01 us unit
2769   UCHAR                           ucMaxNBVoltage;
2770   UCHAR                           ucMinNBVoltage;
2771   UCHAR                           ucMemoryType;					      //[7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved
2772   UCHAR                           ucNumberOfCyclesInPeriod;		//CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod
2773   UCHAR                           ucStartingPWM_HighTime;     //CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime
2774   UCHAR                           ucHTLinkWidth;              //16 bit vs. 8 bit
2775   UCHAR                           ucMaxNBVoltageHigh;
2776   UCHAR                           ucMinNBVoltageHigh;
2777 }ATOM_INTEGRATED_SYSTEM_INFO;
2778 
2779 /* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO
2780 ulBootUpMemoryClock:    For Intel IGP,it's the UMA system memory clock
2781                         For AMD IGP,it's 0 if no SidePort memory installed or it's the boot-up SidePort memory clock
2782 ulMaxSystemMemoryClock: For Intel IGP,it's the Max freq from memory SPD if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
2783                         For AMD IGP,for now this can be 0
2784 ulMinSystemMemoryClock: For Intel IGP,it's 133MHz if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
2785                         For AMD IGP,for now this can be 0
2786 
2787 usFSBClock:             For Intel IGP,it's FSB Freq
2788                         For AMD IGP,it's HT Link Speed
2789 
2790 usK8MemoryClock:        For AMD IGP only. For RevF CPU, set it to 200
2791 usK8SyncStartDelay:     For AMD IGP only. Memory access latency in K8, required for watermark calculation
2792 usK8DataReturnTime:     For AMD IGP only. Memory access latency in K8, required for watermark calculation
2793 
2794 VC:Voltage Control
2795 ucMaxNBVoltage:         Voltage regulator dependent PWM value. Low 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
2796 ucMinNBVoltage:         Voltage regulator dependent PWM value. Low 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
2797 
2798 ucNumberOfCyclesInPeriod:   Indicate how many cycles when PWM duty is 100%. low 8 bits of the value.
2799 ucNumberOfCyclesInPeriodHi: Indicate how many cycles when PWM duty is 100%. high 8 bits of the value.If the PWM has an inverter,set bit [7]==1,otherwise set it 0
2800 
2801 ucMaxNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of  the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
2802 ucMinNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
2803 
2804 
2805 usInterNBVoltageLow:    Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
2806 usInterNBVoltageHigh:   Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
2807 */
2808 
2809 
2810 /*
2811 The following IGP table is introduced from RS780, which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST;
2812 Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need.
2813 The enough reservation should allow us to never change table revisions. Whenever needed, a GPU SW component can use reserved portion for new data entries.
2814 
2815 SW components can access the IGP system infor structure in the same way as before
2816 */
2817 
2818 
2819 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2
2820 {
2821   ATOM_COMMON_TABLE_HEADER   sHeader;
2822   ULONG	                     ulBootUpEngineClock;       //in 10kHz unit
2823   ULONG			     ulReserved1[2];            //must be 0x0 for the reserved
2824   ULONG	                     ulBootUpUMAClock;          //in 10kHz unit
2825   ULONG	                     ulBootUpSidePortClock;     //in 10kHz unit
2826   ULONG	                     ulMinSidePortClock;        //in 10kHz unit
2827   ULONG			     ulReserved2[6];            //must be 0x0 for the reserved
2828   ULONG                      ulSystemConfig;            //see explanation below
2829   ULONG                      ulBootUpReqDisplayVector;
2830   ULONG                      ulOtherDisplayMisc;
2831   ULONG                      ulDDISlot1Config;
2832   ULONG                      ulDDISlot2Config;
2833   UCHAR                      ucMemoryType;              //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved
2834   UCHAR                      ucUMAChannelNumber;
2835   UCHAR                      ucDockingPinBit;
2836   UCHAR                      ucDockingPinPolarity;
2837   ULONG                      ulDockingPinCFGInfo;
2838   ULONG                      ulCPUCapInfo;
2839   USHORT                     usNumberOfCyclesInPeriod;
2840   USHORT                     usMaxNBVoltage;
2841   USHORT                     usMinNBVoltage;
2842   USHORT                     usBootUpNBVoltage;
2843   ULONG                      ulHTLinkFreq;              //in 10Khz
2844   USHORT                     usMinHTLinkWidth;
2845   USHORT                     usMaxHTLinkWidth;
2846   USHORT                     usUMASyncStartDelay;
2847   USHORT                     usUMADataReturnTime;
2848   USHORT                     usLinkStatusZeroTime;
2849   USHORT                     usDACEfuse;				//for storing badgap value (for RS880 only)
2850   ULONG                      ulHighVoltageHTLinkFreq;     // in 10Khz
2851   ULONG                      ulLowVoltageHTLinkFreq;      // in 10Khz
2852   USHORT                     usMaxUpStreamHTLinkWidth;
2853   USHORT                     usMaxDownStreamHTLinkWidth;
2854   USHORT                     usMinUpStreamHTLinkWidth;
2855   USHORT                     usMinDownStreamHTLinkWidth;
2856   USHORT                     usFirmwareVersion;         //0 means FW is not supported. Otherwise it's the FW version loaded by SBIOS and driver should enable FW.
2857   USHORT                     usFullT0Time;             // Input to calculate minimum HT link change time required by NB P-State. Unit is 0.01us.
2858   ULONG                      ulReserved3[96];          //must be 0x0
2859 }ATOM_INTEGRATED_SYSTEM_INFO_V2;
2860 
2861 /*
2862 ulBootUpEngineClock:   Boot-up Engine Clock in 10Khz;
2863 ulBootUpUMAClock:      Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is not present
2864 ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not present,this could be equal to or less than maximum supported Sideport memory clock
2865 
2866 ulSystemConfig:
2867 Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode;
2868 Bit[1]=1: system boots up at AMD overdrived state or user customized  mode. In this case, driver will just stick to this boot-up mode. No other PowerPlay state
2869       =0: system boots up at driver control state. Power state depends on PowerPlay table.
2870 Bit[2]=1: PWM method is used on NB voltage control. =0: GPIO method is used.
2871 Bit[3]=1: Only one power state(Performance) will be supported.
2872       =0: Multiple power states supported from PowerPlay table.
2873 Bit[4]=1: CLMC is supported and enabled on current system.
2874       =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface.
2875 Bit[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement.
2876       =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied.
2877 Bit[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and powerplay table voltage drop/throttling request will be ignored.
2878       =0: Voltage settings is determined by powerplay table.
2879 Bit[7]=1: Enable CLMC as hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue.
2880       =0: Enable CLMC as regular mode, CDLD and CILR will be enabled.
2881 Bit[8]=1: CDLF is supported and enabled on current system.
2882       =0: CDLF is not supported or enabled on current system.
2883 Bit[9]=1: DLL Shut Down feature is enabled on current system.
2884       =0: DLL Shut Down feature is not enabled or supported on current system.
2885 
2886 ulBootUpReqDisplayVector: This dword is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions.
2887 
2888 ulOtherDisplayMisc: [15:8]- Bootup LCD Expansion selection; 0-center, 1-full panel size expansion;
2889 			              [7:0] - BootupTV standard selection; This is a bit vector to indicate what TV standards are supported by the system. Refer to ucTVSupportedStd definition;
2890 
2891 ulDDISlot1Config: Describes the PCIE lane configuration on this DDI PCIE slot (ADD2 card) or connector (Mobile design).
2892       [3:0]  - Bit vector to indicate PCIE lane config of the DDI slot/connector on chassis (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12)
2893 			[7:4]  - Bit vector to indicate PCIE lane config of the same DDI slot/connector on docking station (bit 4=1 lane 3:0; bit 5=1 lane 7:4; bit 6=1 lane 11:8; bit 7=1 lane 15:12)
2894       When a DDI connector is not "paired" (meaming two connections mutualexclusive on chassis or docking, only one of them can be connected at one time.
2895       in both chassis and docking, SBIOS has to duplicate the same PCIE lane info from chassis to docking or vice versa. For example:
2896       one DDI connector is only populated in docking with PCIE lane 8-11, but there is no paired connection on chassis, SBIOS has to copy bit 6 to bit 2.
2897 
2898 			[15:8] - Lane configuration attribute;
2899       [23:16]- Connector type, possible value:
2900                CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D
2901                CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D
2902                CONNECTOR_OBJECT_ID_HDMI_TYPE_A
2903                CONNECTOR_OBJECT_ID_DISPLAYPORT
2904                CONNECTOR_OBJECT_ID_eDP
2905 			[31:24]- Reserved
2906 
2907 ulDDISlot2Config: Same as Slot1.
2908 ucMemoryType: SidePort memory type, set it to 0x0 when Sideport memory is not installed. Driver needs this info to change sideport memory clock. Not for display in CCC.
2909 For IGP, Hypermemory is the only memory type showed in CCC.
2910 
2911 ucUMAChannelNumber:  how many channels for the UMA;
2912 
2913 ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pin; [31:16]-reg offset in CFG to read this pin
2914 ucDockingPinBit:     which bit in this register to read the pin status;
2915 ucDockingPinPolarity:Polarity of the pin when docked;
2916 
2917 ulCPUCapInfo:        [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, [7:0]=4:Pharaoh, other bits reserved for now and must be 0x0
2918 
2919 usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%.
2920 
2921 usMaxNBVoltage:Max. voltage control value in either PWM or GPIO mode.
2922 usMinNBVoltage:Min. voltage control value in either PWM or GPIO mode.
2923                     GPIO mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=0
2924                     PWM mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=1
2925                     GPU SW don't control mode: usMaxNBVoltage & usMinNBVoltage=0 and no care about ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE
2926 
2927 usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value.
2928 
2929 ulHTLinkFreq:       Bootup HT link Frequency in 10Khz.
2930 usMinHTLinkWidth:   Bootup minimum HT link width. If CDLW disabled, this is equal to usMaxHTLinkWidth.
2931                     If CDLW enabled, both upstream and downstream width should be the same during bootup.
2932 usMaxHTLinkWidth:   Bootup maximum HT link width. If CDLW disabled, this is equal to usMinHTLinkWidth.
2933                     If CDLW enabled, both upstream and downstream width should be the same during bootup.
2934 
2935 usUMASyncStartDelay: Memory access latency, required for watermark calculation
2936 usUMADataReturnTime: Memory access latency, required for watermark calculation
2937 usLinkStatusZeroTime:Memory access latency required for watermark calculation, set this to 0x0 for K8 CPU, set a proper value in 0.01 the unit of us
2938 for Griffin or Greyhound. SBIOS needs to convert to actual time by:
2939                      if T0Ttime [5:4]=00b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.1us (0.0 to 1.5us)
2940                      if T0Ttime [5:4]=01b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.5us (0.0 to 7.5us)
2941                      if T0Ttime [5:4]=10b, then usLinkStatusZeroTime=T0Ttime [3:0]*2.0us (0.0 to 30us)
2942                      if T0Ttime [5:4]=11b, and T0Ttime [3:0]=0x0 to 0xa, then usLinkStatusZeroTime=T0Ttime [3:0]*20us (0.0 to 200us)
2943 
2944 ulHighVoltageHTLinkFreq:     HT link frequency for power state with low voltage. If boot up runs in HT1, this must be 0.
2945                              This must be less than or equal to ulHTLinkFreq(bootup frequency).
2946 ulLowVoltageHTLinkFreq:      HT link frequency for power state with low voltage or voltage scaling 1.0v~1.1v. If boot up runs in HT1, this must be 0.
2947                              This must be less than or equal to ulHighVoltageHTLinkFreq.
2948 
2949 usMaxUpStreamHTLinkWidth:    Asymmetric link width support in the future, to replace usMaxHTLinkWidth. Not used for now.
2950 usMaxDownStreamHTLinkWidth:  same as above.
2951 usMinUpStreamHTLinkWidth:    Asymmetric link width support in the future, to replace usMinHTLinkWidth. Not used for now.
2952 usMinDownStreamHTLinkWidth:  same as above.
2953 */
2954 
2955 // ATOM_INTEGRATED_SYSTEM_INFO::ulCPUCapInfo  - CPU type definition
2956 #define    INTEGRATED_SYSTEM_INFO__UNKNOWN_CPU             0
2957 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__GRIFFIN        1
2958 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND      2
2959 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__K8             3
2960 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH        4
2961 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI         5
2962 
2963 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE       INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI    // this deff reflects max defined CPU code
2964 
2965 #define SYSTEM_CONFIG_POWEREXPRESS_ENABLE                 0x00000001
2966 #define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE             0x00000002
2967 #define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE                  0x00000004
2968 #define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY         0x00000008
2969 #define SYSTEM_CONFIG_CLMC_ENABLED                        0x00000010
2970 #define SYSTEM_CONFIG_CDLW_ENABLED                        0x00000020
2971 #define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED              0x00000040
2972 #define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED            0x00000080
2973 #define SYSTEM_CONFIG_CDLF_ENABLED                        0x00000100
2974 #define SYSTEM_CONFIG_DLL_SHUTDOWN_ENABLED                0x00000200
2975 
2976 #define IGP_DDI_SLOT_LANE_CONFIG_MASK                     0x000000FF
2977 
2978 #define b0IGP_DDI_SLOT_LANE_MAP_MASK                      0x0F
2979 #define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK              0xF0
2980 #define b0IGP_DDI_SLOT_CONFIG_LANE_0_3                    0x01
2981 #define b0IGP_DDI_SLOT_CONFIG_LANE_4_7                    0x02
2982 #define b0IGP_DDI_SLOT_CONFIG_LANE_8_11                   0x04
2983 #define b0IGP_DDI_SLOT_CONFIG_LANE_12_15                  0x08
2984 
2985 #define IGP_DDI_SLOT_ATTRIBUTE_MASK                       0x0000FF00
2986 #define IGP_DDI_SLOT_CONFIG_REVERSED                      0x00000100
2987 #define b1IGP_DDI_SLOT_CONFIG_REVERSED                    0x01
2988 
2989 #define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK                  0x00FF0000
2990 
2991 // IntegratedSystemInfoTable new Rev is V5 after V2, because of the real rev of V2 is v1.4. This rev is used for RR
2992 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V5
2993 {
2994   ATOM_COMMON_TABLE_HEADER   sHeader;
2995   ULONG	                     ulBootUpEngineClock;       //in 10kHz unit
2996   ULONG                      ulDentistVCOFreq;          //Dentist VCO clock in 10kHz unit, the source of GPU SCLK, LCLK, UCLK and VCLK.
2997   ULONG                      ulLClockFreq;              //GPU Lclk freq in 10kHz unit, have relationship with NCLK in NorthBridge
2998   ULONG	                     ulBootUpUMAClock;          //in 10kHz unit
2999   ULONG                      ulReserved1[8];            //must be 0x0 for the reserved
3000   ULONG                      ulBootUpReqDisplayVector;
3001   ULONG                      ulOtherDisplayMisc;
3002   ULONG                      ulReserved2[4];            //must be 0x0 for the reserved
3003   ULONG                      ulSystemConfig;            //TBD
3004   ULONG                      ulCPUCapInfo;              //TBD
3005   USHORT                     usMaxNBVoltage;            //high NB voltage, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse;
3006   USHORT                     usMinNBVoltage;            //low NB voltage, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse;
3007   USHORT                     usBootUpNBVoltage;         //boot up NB voltage
3008   UCHAR                      ucHtcTmpLmt;               //bit [22:16] of D24F3x64 Hardware Thermal Control (HTC) Register, may not be needed, TBD
3009   UCHAR                      ucTjOffset;                //bit [28:22] of D24F3xE4 Thermtrip Status Register,may not be needed, TBD
3010   ULONG                      ulReserved3[4];            //must be 0x0 for the reserved
3011   ULONG                      ulDDISlot1Config;          //see above ulDDISlot1Config definition
3012   ULONG                      ulDDISlot2Config;
3013   ULONG                      ulDDISlot3Config;
3014   ULONG                      ulDDISlot4Config;
3015   ULONG                      ulReserved4[4];            //must be 0x0 for the reserved
3016   UCHAR                      ucMemoryType;              //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved
3017   UCHAR                      ucUMAChannelNumber;
3018   USHORT                     usReserved;
3019   ULONG                      ulReserved5[4];            //must be 0x0 for the reserved
3020   ULONG                      ulCSR_M3_ARB_CNTL_DEFAULT[10];//arrays with values for CSR M3 arbiter for default
3021   ULONG                      ulCSR_M3_ARB_CNTL_UVD[10]; //arrays with values for CSR M3 arbiter for UVD playback
3022   ULONG                      ulCSR_M3_ARB_CNTL_FS3D[10];//arrays with values for CSR M3 arbiter for Full Screen 3D applications
3023   ULONG                      ulReserved6[61];           //must be 0x0
3024 }ATOM_INTEGRATED_SYSTEM_INFO_V5;
3025 
3026 #define ATOM_CRT_INT_ENCODER1_INDEX                       0x00000000
3027 #define ATOM_LCD_INT_ENCODER1_INDEX                       0x00000001
3028 #define ATOM_TV_INT_ENCODER1_INDEX                        0x00000002
3029 #define ATOM_DFP_INT_ENCODER1_INDEX                       0x00000003
3030 #define ATOM_CRT_INT_ENCODER2_INDEX                       0x00000004
3031 #define ATOM_LCD_EXT_ENCODER1_INDEX                       0x00000005
3032 #define ATOM_TV_EXT_ENCODER1_INDEX                        0x00000006
3033 #define ATOM_DFP_EXT_ENCODER1_INDEX                       0x00000007
3034 #define ATOM_CV_INT_ENCODER1_INDEX                        0x00000008
3035 #define ATOM_DFP_INT_ENCODER2_INDEX                       0x00000009
3036 #define ATOM_CRT_EXT_ENCODER1_INDEX                       0x0000000A
3037 #define ATOM_CV_EXT_ENCODER1_INDEX                        0x0000000B
3038 #define ATOM_DFP_INT_ENCODER3_INDEX                       0x0000000C
3039 #define ATOM_DFP_INT_ENCODER4_INDEX                       0x0000000D
3040 
3041 // define ASIC internal encoder id ( bit vector ), used for CRTC_SourceSelTable
3042 #define ASIC_INT_DAC1_ENCODER_ID    											0x00
3043 #define ASIC_INT_TV_ENCODER_ID														0x02
3044 #define ASIC_INT_DIG1_ENCODER_ID													0x03
3045 #define ASIC_INT_DAC2_ENCODER_ID													0x04
3046 #define ASIC_EXT_TV_ENCODER_ID														0x06
3047 #define ASIC_INT_DVO_ENCODER_ID														0x07
3048 #define ASIC_INT_DIG2_ENCODER_ID													0x09
3049 #define ASIC_EXT_DIG_ENCODER_ID														0x05
3050 #define ASIC_EXT_DIG2_ENCODER_ID													0x08
3051 #define ASIC_INT_DIG3_ENCODER_ID													0x0a
3052 #define ASIC_INT_DIG4_ENCODER_ID													0x0b
3053 #define ASIC_INT_DIG5_ENCODER_ID													0x0c
3054 #define ASIC_INT_DIG6_ENCODER_ID													0x0d
3055 #define ASIC_INT_DIG7_ENCODER_ID													0x0e
3056 
3057 //define Encoder attribute
3058 #define ATOM_ANALOG_ENCODER																0
3059 #define ATOM_DIGITAL_ENCODER															1
3060 #define ATOM_DP_ENCODER															      2
3061 
3062 #define ATOM_ENCODER_ENUM_MASK                            0x70
3063 #define ATOM_ENCODER_ENUM_ID1                             0x00
3064 #define ATOM_ENCODER_ENUM_ID2                             0x10
3065 #define ATOM_ENCODER_ENUM_ID3                             0x20
3066 #define ATOM_ENCODER_ENUM_ID4                             0x30
3067 #define ATOM_ENCODER_ENUM_ID5                             0x40
3068 #define ATOM_ENCODER_ENUM_ID6                             0x50
3069 
3070 #define ATOM_DEVICE_CRT1_INDEX                            0x00000000
3071 #define ATOM_DEVICE_LCD1_INDEX                            0x00000001
3072 #define ATOM_DEVICE_TV1_INDEX                             0x00000002
3073 #define ATOM_DEVICE_DFP1_INDEX                            0x00000003
3074 #define ATOM_DEVICE_CRT2_INDEX                            0x00000004
3075 #define ATOM_DEVICE_LCD2_INDEX                            0x00000005
3076 #define ATOM_DEVICE_DFP6_INDEX                            0x00000006
3077 #define ATOM_DEVICE_DFP2_INDEX                            0x00000007
3078 #define ATOM_DEVICE_CV_INDEX                              0x00000008
3079 #define ATOM_DEVICE_DFP3_INDEX                            0x00000009
3080 #define ATOM_DEVICE_DFP4_INDEX                            0x0000000A
3081 #define ATOM_DEVICE_DFP5_INDEX                            0x0000000B
3082 
3083 #define ATOM_DEVICE_RESERVEDC_INDEX                       0x0000000C
3084 #define ATOM_DEVICE_RESERVEDD_INDEX                       0x0000000D
3085 #define ATOM_DEVICE_RESERVEDE_INDEX                       0x0000000E
3086 #define ATOM_DEVICE_RESERVEDF_INDEX                       0x0000000F
3087 #define ATOM_MAX_SUPPORTED_DEVICE_INFO                    (ATOM_DEVICE_DFP3_INDEX+1)
3088 #define ATOM_MAX_SUPPORTED_DEVICE_INFO_2                  ATOM_MAX_SUPPORTED_DEVICE_INFO
3089 #define ATOM_MAX_SUPPORTED_DEVICE_INFO_3                  (ATOM_DEVICE_DFP5_INDEX + 1 )
3090 
3091 #define ATOM_MAX_SUPPORTED_DEVICE                         (ATOM_DEVICE_RESERVEDF_INDEX+1)
3092 
3093 #define ATOM_DEVICE_CRT1_SUPPORT                          (0x1L << ATOM_DEVICE_CRT1_INDEX )
3094 #define ATOM_DEVICE_LCD1_SUPPORT                          (0x1L << ATOM_DEVICE_LCD1_INDEX )
3095 #define ATOM_DEVICE_TV1_SUPPORT                           (0x1L << ATOM_DEVICE_TV1_INDEX  )
3096 #define ATOM_DEVICE_DFP1_SUPPORT                          (0x1L << ATOM_DEVICE_DFP1_INDEX )
3097 #define ATOM_DEVICE_CRT2_SUPPORT                          (0x1L << ATOM_DEVICE_CRT2_INDEX )
3098 #define ATOM_DEVICE_LCD2_SUPPORT                          (0x1L << ATOM_DEVICE_LCD2_INDEX )
3099 #define ATOM_DEVICE_DFP6_SUPPORT                          (0x1L << ATOM_DEVICE_DFP6_INDEX )
3100 #define ATOM_DEVICE_DFP2_SUPPORT                          (0x1L << ATOM_DEVICE_DFP2_INDEX )
3101 #define ATOM_DEVICE_CV_SUPPORT                            (0x1L << ATOM_DEVICE_CV_INDEX   )
3102 #define ATOM_DEVICE_DFP3_SUPPORT                          (0x1L << ATOM_DEVICE_DFP3_INDEX )
3103 #define ATOM_DEVICE_DFP4_SUPPORT                          (0x1L << ATOM_DEVICE_DFP4_INDEX )
3104 #define ATOM_DEVICE_DFP5_SUPPORT                          (0x1L << ATOM_DEVICE_DFP5_INDEX )
3105 
3106 #define ATOM_DEVICE_CRT_SUPPORT                           (ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT)
3107 #define ATOM_DEVICE_DFP_SUPPORT                           (ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT |  ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | ATOM_DEVICE_DFP5_SUPPORT | ATOM_DEVICE_DFP6_SUPPORT)
3108 #define ATOM_DEVICE_TV_SUPPORT                            (ATOM_DEVICE_TV1_SUPPORT)
3109 #define ATOM_DEVICE_LCD_SUPPORT                           (ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT)
3110 
3111 #define ATOM_DEVICE_CONNECTOR_TYPE_MASK                   0x000000F0
3112 #define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT                  0x00000004
3113 #define ATOM_DEVICE_CONNECTOR_VGA                         0x00000001
3114 #define ATOM_DEVICE_CONNECTOR_DVI_I                       0x00000002
3115 #define ATOM_DEVICE_CONNECTOR_DVI_D                       0x00000003
3116 #define ATOM_DEVICE_CONNECTOR_DVI_A                       0x00000004
3117 #define ATOM_DEVICE_CONNECTOR_SVIDEO                      0x00000005
3118 #define ATOM_DEVICE_CONNECTOR_COMPOSITE                   0x00000006
3119 #define ATOM_DEVICE_CONNECTOR_LVDS                        0x00000007
3120 #define ATOM_DEVICE_CONNECTOR_DIGI_LINK                   0x00000008
3121 #define ATOM_DEVICE_CONNECTOR_SCART                       0x00000009
3122 #define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A                 0x0000000A
3123 #define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B                 0x0000000B
3124 #define ATOM_DEVICE_CONNECTOR_CASE_1                      0x0000000E
3125 #define ATOM_DEVICE_CONNECTOR_DISPLAYPORT                 0x0000000F
3126 
3127 
3128 #define ATOM_DEVICE_DAC_INFO_MASK                         0x0000000F
3129 #define ATOM_DEVICE_DAC_INFO_SHIFT                        0x00000000
3130 #define ATOM_DEVICE_DAC_INFO_NODAC                        0x00000000
3131 #define ATOM_DEVICE_DAC_INFO_DACA                         0x00000001
3132 #define ATOM_DEVICE_DAC_INFO_DACB                         0x00000002
3133 #define ATOM_DEVICE_DAC_INFO_EXDAC                        0x00000003
3134 
3135 #define ATOM_DEVICE_I2C_ID_NOI2C                          0x00000000
3136 
3137 #define ATOM_DEVICE_I2C_LINEMUX_MASK                      0x0000000F
3138 #define ATOM_DEVICE_I2C_LINEMUX_SHIFT                     0x00000000
3139 
3140 #define ATOM_DEVICE_I2C_ID_MASK                           0x00000070
3141 #define ATOM_DEVICE_I2C_ID_SHIFT                          0x00000004
3142 #define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE              0x00000001
3143 #define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE                  0x00000002
3144 #define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE                0x00000003    //For IGP RS600
3145 #define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL                 0x00000004    //For IGP RS690
3146 
3147 #define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK                 0x00000080
3148 #define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT                0x00000007
3149 #define	ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C            0x00000000
3150 #define	ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C            0x00000001
3151 
3152 //  usDeviceSupport:
3153 //  Bits0	= 0 - no CRT1 support= 1- CRT1 is supported
3154 //  Bit 1	= 0 - no LCD1 support= 1- LCD1 is supported
3155 //  Bit 2	= 0 - no TV1  support= 1- TV1  is supported
3156 //  Bit 3	= 0 - no DFP1 support= 1- DFP1 is supported
3157 //  Bit 4	= 0 - no CRT2 support= 1- CRT2 is supported
3158 //  Bit 5	= 0 - no LCD2 support= 1- LCD2 is supported
3159 //  Bit 6	= 0 - no DFP6 support= 1- DFP6 is supported
3160 //  Bit 7	= 0 - no DFP2 support= 1- DFP2 is supported
3161 //  Bit 8	= 0 - no CV   support= 1- CV   is supported
3162 //  Bit 9	= 0 - no DFP3 support= 1- DFP3 is supported
3163 //  Bit 10      = 0 - no DFP4 support= 1- DFP4 is supported
3164 //  Bit 11      = 0 - no DFP5 support= 1- DFP5 is supported
3165 //
3166 //
3167 
3168 /****************************************************************************/
3169 /* Structure used in MclkSS_InfoTable                                       */
3170 /****************************************************************************/
3171 //		ucI2C_ConfigID
3172 //    [7:0] - I2C LINE Associate ID
3173 //          = 0   - no I2C
3174 //    [7]		-	HW_Cap        =	1,  [6:0]=HW assisted I2C ID(HW line selection)
3175 //                          =	0,  [6:0]=SW assisted I2C ID
3176 //    [6-4]	- HW_ENGINE_ID  =	1,  HW engine for NON multimedia use
3177 //                          =	2,	HW engine for Multimedia use
3178 //                          =	3-7	Reserved for future I2C engines
3179 //		[3-0] - I2C_LINE_MUX  = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C
3180 
3181 typedef struct _ATOM_I2C_ID_CONFIG
3182 {
3183 #if ATOM_BIG_ENDIAN
3184   UCHAR   bfHW_Capable:1;
3185   UCHAR   bfHW_EngineID:3;
3186   UCHAR   bfI2C_LineMux:4;
3187 #else
3188   UCHAR   bfI2C_LineMux:4;
3189   UCHAR   bfHW_EngineID:3;
3190   UCHAR   bfHW_Capable:1;
3191 #endif
3192 }ATOM_I2C_ID_CONFIG;
3193 
3194 typedef union _ATOM_I2C_ID_CONFIG_ACCESS
3195 {
3196   ATOM_I2C_ID_CONFIG sbfAccess;
3197   UCHAR              ucAccess;
3198 }ATOM_I2C_ID_CONFIG_ACCESS;
3199 
3200 
3201 /****************************************************************************/
3202 // Structure used in GPIO_I2C_InfoTable
3203 /****************************************************************************/
3204 typedef struct _ATOM_GPIO_I2C_ASSIGMENT
3205 {
3206   USHORT                    usClkMaskRegisterIndex;
3207   USHORT                    usClkEnRegisterIndex;
3208   USHORT                    usClkY_RegisterIndex;
3209   USHORT                    usClkA_RegisterIndex;
3210   USHORT                    usDataMaskRegisterIndex;
3211   USHORT                    usDataEnRegisterIndex;
3212   USHORT                    usDataY_RegisterIndex;
3213   USHORT                    usDataA_RegisterIndex;
3214   ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
3215   UCHAR                     ucClkMaskShift;
3216   UCHAR                     ucClkEnShift;
3217   UCHAR                     ucClkY_Shift;
3218   UCHAR                     ucClkA_Shift;
3219   UCHAR                     ucDataMaskShift;
3220   UCHAR                     ucDataEnShift;
3221   UCHAR                     ucDataY_Shift;
3222   UCHAR                     ucDataA_Shift;
3223   UCHAR                     ucReserved1;
3224   UCHAR                     ucReserved2;
3225 }ATOM_GPIO_I2C_ASSIGMENT;
3226 
3227 typedef struct _ATOM_GPIO_I2C_INFO
3228 {
3229   ATOM_COMMON_TABLE_HEADER	sHeader;
3230   ATOM_GPIO_I2C_ASSIGMENT   asGPIO_Info[ATOM_MAX_SUPPORTED_DEVICE];
3231 }ATOM_GPIO_I2C_INFO;
3232 
3233 /****************************************************************************/
3234 // Common Structure used in other structures
3235 /****************************************************************************/
3236 
3237 #ifndef _H2INC
3238 
3239 //Please don't add or expand this bitfield structure below, this one will retire soon.!
3240 typedef struct _ATOM_MODE_MISC_INFO
3241 {
3242 #if ATOM_BIG_ENDIAN
3243   USHORT Reserved:6;
3244   USHORT RGB888:1;
3245   USHORT DoubleClock:1;
3246   USHORT Interlace:1;
3247   USHORT CompositeSync:1;
3248   USHORT V_ReplicationBy2:1;
3249   USHORT H_ReplicationBy2:1;
3250   USHORT VerticalCutOff:1;
3251   USHORT VSyncPolarity:1;      //0=Active High, 1=Active Low
3252   USHORT HSyncPolarity:1;      //0=Active High, 1=Active Low
3253   USHORT HorizontalCutOff:1;
3254 #else
3255   USHORT HorizontalCutOff:1;
3256   USHORT HSyncPolarity:1;      //0=Active High, 1=Active Low
3257   USHORT VSyncPolarity:1;      //0=Active High, 1=Active Low
3258   USHORT VerticalCutOff:1;
3259   USHORT H_ReplicationBy2:1;
3260   USHORT V_ReplicationBy2:1;
3261   USHORT CompositeSync:1;
3262   USHORT Interlace:1;
3263   USHORT DoubleClock:1;
3264   USHORT RGB888:1;
3265   USHORT Reserved:6;
3266 #endif
3267 }ATOM_MODE_MISC_INFO;
3268 
3269 typedef union _ATOM_MODE_MISC_INFO_ACCESS
3270 {
3271   ATOM_MODE_MISC_INFO sbfAccess;
3272   USHORT              usAccess;
3273 }ATOM_MODE_MISC_INFO_ACCESS;
3274 
3275 #else
3276 
3277 typedef union _ATOM_MODE_MISC_INFO_ACCESS
3278 {
3279   USHORT              usAccess;
3280 }ATOM_MODE_MISC_INFO_ACCESS;
3281 
3282 #endif
3283 
3284 // usModeMiscInfo-
3285 #define ATOM_H_CUTOFF           0x01
3286 #define ATOM_HSYNC_POLARITY     0x02             //0=Active High, 1=Active Low
3287 #define ATOM_VSYNC_POLARITY     0x04             //0=Active High, 1=Active Low
3288 #define ATOM_V_CUTOFF           0x08
3289 #define ATOM_H_REPLICATIONBY2   0x10
3290 #define ATOM_V_REPLICATIONBY2   0x20
3291 #define ATOM_COMPOSITESYNC      0x40
3292 #define ATOM_INTERLACE          0x80
3293 #define ATOM_DOUBLE_CLOCK_MODE  0x100
3294 #define ATOM_RGB888_MODE        0x200
3295 
3296 //usRefreshRate-
3297 #define ATOM_REFRESH_43         43
3298 #define ATOM_REFRESH_47         47
3299 #define ATOM_REFRESH_56         56
3300 #define ATOM_REFRESH_60         60
3301 #define ATOM_REFRESH_65         65
3302 #define ATOM_REFRESH_70         70
3303 #define ATOM_REFRESH_72         72
3304 #define ATOM_REFRESH_75         75
3305 #define ATOM_REFRESH_85         85
3306 
3307 // ATOM_MODE_TIMING data are exactly the same as VESA timing data.
3308 // Translation from EDID to ATOM_MODE_TIMING, use the following formula.
3309 //
3310 //	VESA_HTOTAL			=	VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK
3311 //						=	EDID_HA + EDID_HBL
3312 //	VESA_HDISP			=	VESA_ACTIVE	=	EDID_HA
3313 //	VESA_HSYNC_START	=	VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH
3314 //						=	EDID_HA + EDID_HSO
3315 //	VESA_HSYNC_WIDTH	=	VESA_HSYNC_TIME	=	EDID_HSPW
3316 //	VESA_BORDER			=	EDID_BORDER
3317 
3318 /****************************************************************************/
3319 // Structure used in SetCRTC_UsingDTDTimingTable
3320 /****************************************************************************/
3321 typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS
3322 {
3323   USHORT  usH_Size;
3324   USHORT  usH_Blanking_Time;
3325   USHORT  usV_Size;
3326   USHORT  usV_Blanking_Time;
3327   USHORT  usH_SyncOffset;
3328   USHORT  usH_SyncWidth;
3329   USHORT  usV_SyncOffset;
3330   USHORT  usV_SyncWidth;
3331   ATOM_MODE_MISC_INFO_ACCESS  susModeMiscInfo;
3332   UCHAR   ucH_Border;         // From DFP EDID
3333   UCHAR   ucV_Border;
3334   UCHAR   ucCRTC;             // ATOM_CRTC1 or ATOM_CRTC2
3335   UCHAR   ucPadding[3];
3336 }SET_CRTC_USING_DTD_TIMING_PARAMETERS;
3337 
3338 /****************************************************************************/
3339 // Structure used in SetCRTC_TimingTable
3340 /****************************************************************************/
3341 typedef struct _SET_CRTC_TIMING_PARAMETERS
3342 {
3343   USHORT                      usH_Total;        // horizontal total
3344   USHORT                      usH_Disp;         // horizontal display
3345   USHORT                      usH_SyncStart;    // horozontal Sync start
3346   USHORT                      usH_SyncWidth;    // horizontal Sync width
3347   USHORT                      usV_Total;        // vertical total
3348   USHORT                      usV_Disp;         // vertical display
3349   USHORT                      usV_SyncStart;    // vertical Sync start
3350   USHORT                      usV_SyncWidth;    // vertical Sync width
3351   ATOM_MODE_MISC_INFO_ACCESS  susModeMiscInfo;
3352   UCHAR                       ucCRTC;           // ATOM_CRTC1 or ATOM_CRTC2
3353   UCHAR                       ucOverscanRight;  // right
3354   UCHAR                       ucOverscanLeft;   // left
3355   UCHAR                       ucOverscanBottom; // bottom
3356   UCHAR                       ucOverscanTop;    // top
3357   UCHAR                       ucReserved;
3358 }SET_CRTC_TIMING_PARAMETERS;
3359 #define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS
3360 
3361 /****************************************************************************/
3362 // Structure used in StandardVESA_TimingTable
3363 //                   AnalogTV_InfoTable
3364 //                   ComponentVideoInfoTable
3365 /****************************************************************************/
3366 typedef struct _ATOM_MODE_TIMING
3367 {
3368   USHORT  usCRTC_H_Total;
3369   USHORT  usCRTC_H_Disp;
3370   USHORT  usCRTC_H_SyncStart;
3371   USHORT  usCRTC_H_SyncWidth;
3372   USHORT  usCRTC_V_Total;
3373   USHORT  usCRTC_V_Disp;
3374   USHORT  usCRTC_V_SyncStart;
3375   USHORT  usCRTC_V_SyncWidth;
3376   USHORT  usPixelClock;					                 //in 10Khz unit
3377   ATOM_MODE_MISC_INFO_ACCESS  susModeMiscInfo;
3378   USHORT  usCRTC_OverscanRight;
3379   USHORT  usCRTC_OverscanLeft;
3380   USHORT  usCRTC_OverscanBottom;
3381   USHORT  usCRTC_OverscanTop;
3382   USHORT  usReserve;
3383   UCHAR   ucInternalModeNumber;
3384   UCHAR   ucRefreshRate;
3385 }ATOM_MODE_TIMING;
3386 
3387 typedef struct _ATOM_DTD_FORMAT
3388 {
3389   USHORT  usPixClk;
3390   USHORT  usHActive;
3391   USHORT  usHBlanking_Time;
3392   USHORT  usVActive;
3393   USHORT  usVBlanking_Time;
3394   USHORT  usHSyncOffset;
3395   USHORT  usHSyncWidth;
3396   USHORT  usVSyncOffset;
3397   USHORT  usVSyncWidth;
3398   USHORT  usImageHSize;
3399   USHORT  usImageVSize;
3400   UCHAR   ucHBorder;
3401   UCHAR   ucVBorder;
3402   ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
3403   UCHAR   ucInternalModeNumber;
3404   UCHAR   ucRefreshRate;
3405 }ATOM_DTD_FORMAT;
3406 
3407 /****************************************************************************/
3408 // Structure used in LVDS_InfoTable
3409 //  * Need a document to describe this table
3410 /****************************************************************************/
3411 #define SUPPORTED_LCD_REFRESHRATE_30Hz          0x0004
3412 #define SUPPORTED_LCD_REFRESHRATE_40Hz          0x0008
3413 #define SUPPORTED_LCD_REFRESHRATE_50Hz          0x0010
3414 #define SUPPORTED_LCD_REFRESHRATE_60Hz          0x0020
3415 
3416 //ucTableFormatRevision=1
3417 //ucTableContentRevision=1
3418 typedef struct _ATOM_LVDS_INFO
3419 {
3420   ATOM_COMMON_TABLE_HEADER sHeader;
3421   ATOM_DTD_FORMAT     sLCDTiming;
3422   USHORT              usModePatchTableOffset;
3423   USHORT              usSupportedRefreshRate;     //Refer to panel info table in ATOMBIOS extension Spec.
3424   USHORT              usOffDelayInMs;
3425   UCHAR               ucPowerSequenceDigOntoDEin10Ms;
3426   UCHAR               ucPowerSequenceDEtoBLOnin10Ms;
3427   UCHAR               ucLVDS_Misc;               // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level}
3428                                                  // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
3429                                                  // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled}
3430                                                  // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled}
3431   UCHAR               ucPanelDefaultRefreshRate;
3432   UCHAR               ucPanelIdentification;
3433   UCHAR               ucSS_Id;
3434 }ATOM_LVDS_INFO;
3435 
3436 //ucTableFormatRevision=1
3437 //ucTableContentRevision=2
3438 typedef struct _ATOM_LVDS_INFO_V12
3439 {
3440   ATOM_COMMON_TABLE_HEADER sHeader;
3441   ATOM_DTD_FORMAT     sLCDTiming;
3442   USHORT              usExtInfoTableOffset;
3443   USHORT              usSupportedRefreshRate;     //Refer to panel info table in ATOMBIOS extension Spec.
3444   USHORT              usOffDelayInMs;
3445   UCHAR               ucPowerSequenceDigOntoDEin10Ms;
3446   UCHAR               ucPowerSequenceDEtoBLOnin10Ms;
3447   UCHAR               ucLVDS_Misc;               // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level}
3448                                                  // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
3449                                                  // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled}
3450                                                  // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled}
3451   UCHAR               ucPanelDefaultRefreshRate;
3452   UCHAR               ucPanelIdentification;
3453   UCHAR               ucSS_Id;
3454   USHORT              usLCDVenderID;
3455   USHORT              usLCDProductID;
3456   UCHAR               ucLCDPanel_SpecialHandlingCap;
3457 	UCHAR								ucPanelInfoSize;					//  start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable
3458   UCHAR               ucReserved[2];
3459 }ATOM_LVDS_INFO_V12;
3460 
3461 //Definitions for ucLCDPanel_SpecialHandlingCap:
3462 
3463 //Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12.
3464 //Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL
3465 #define	LCDPANEL_CAP_READ_EDID                  0x1
3466 
3467 //If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together
3468 //with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static
3469 //refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12
3470 #define	LCDPANEL_CAP_DRR_SUPPORTED              0x2
3471 
3472 //Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
3473 #define	LCDPANEL_CAP_eDP                        0x4
3474 
3475 
3476 //Color Bit Depth definition in EDID V1.4 @BYTE 14h
3477 //Bit 6  5  4
3478                               //      0  0  0  -  Color bit depth is undefined
3479                               //      0  0  1  -  6 Bits per Primary Color
3480                               //      0  1  0  -  8 Bits per Primary Color
3481                               //      0  1  1  - 10 Bits per Primary Color
3482                               //      1  0  0  - 12 Bits per Primary Color
3483                               //      1  0  1  - 14 Bits per Primary Color
3484                               //      1  1  0  - 16 Bits per Primary Color
3485                               //      1  1  1  - Reserved
3486 
3487 #define PANEL_COLOR_BIT_DEPTH_MASK    0x70
3488 
3489 // Bit7:{=0:Random Dithering disabled;1 Random Dithering enabled}
3490 #define PANEL_RANDOM_DITHER   0x80
3491 #define PANEL_RANDOM_DITHER_MASK   0x80
3492 
3493 #define ATOM_LVDS_INFO_LAST  ATOM_LVDS_INFO_V12   // no need to change this
3494 
3495 /****************************************************************************/
3496 // Structures used by LCD_InfoTable V1.3    Note: previous version was called ATOM_LVDS_INFO_V12
3497 // ASIC Families:  NI
3498 // ucTableFormatRevision=1
3499 // ucTableContentRevision=3
3500 /****************************************************************************/
3501 typedef struct _ATOM_LCD_INFO_V13
3502 {
3503   ATOM_COMMON_TABLE_HEADER sHeader;
3504   ATOM_DTD_FORMAT     sLCDTiming;
3505   USHORT              usExtInfoTableOffset;
3506   USHORT              usSupportedRefreshRate;     //Refer to panel info table in ATOMBIOS extension Spec.
3507   ULONG               ulReserved0;
3508   UCHAR               ucLCD_Misc;                // Reorganized in V13
3509                                                  // Bit0: {=0:single, =1:dual},
3510                                                  // Bit1: {=0:LDI format for RGB888, =1 FPDI format for RGB888}  // was {=0:666RGB, =1:888RGB},
3511                                                  // Bit3:2: {Grey level}
3512                                                  // Bit6:4 Color Bit Depth definition (see below definition in EDID V1.4 @BYTE 14h)
3513                                                  // Bit7   Reserved.  was for ATOM_PANEL_MISC_API_ENABLED, still need it?
3514   UCHAR               ucPanelDefaultRefreshRate;
3515   UCHAR               ucPanelIdentification;
3516   UCHAR               ucSS_Id;
3517   USHORT              usLCDVenderID;
3518   USHORT              usLCDProductID;
3519   UCHAR               ucLCDPanel_SpecialHandlingCap;  // Reorganized in V13
3520                                                  // Bit0: Once DAL sees this CAP is set, it will read EDID from LCD on its own
3521                                                  // Bit1: See LCDPANEL_CAP_DRR_SUPPORTED
3522                                                  // Bit2: a quick reference whether an embadded panel (LCD1 ) is LVDS (0) or eDP (1)
3523                                                  // Bit7-3: Reserved
3524   UCHAR               ucPanelInfoSize;					 //  start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable
3525   USHORT              usBacklightPWM;            //  Backlight PWM in Hz. New in _V13
3526 
3527   UCHAR               ucPowerSequenceDIGONtoDE_in4Ms;
3528   UCHAR               ucPowerSequenceDEtoVARY_BL_in4Ms;
3529   UCHAR               ucPowerSequenceVARY_BLtoDE_in4Ms;
3530   UCHAR               ucPowerSequenceDEtoDIGON_in4Ms;
3531 
3532   UCHAR               ucOffDelay_in4Ms;
3533   UCHAR               ucPowerSequenceVARY_BLtoBLON_in4Ms;
3534   UCHAR               ucPowerSequenceBLONtoVARY_BL_in4Ms;
3535   UCHAR               ucReserved1;
3536 
3537   UCHAR               ucDPCD_eDP_CONFIGURATION_CAP;     // dpcd 0dh
3538   UCHAR               ucDPCD_MAX_LINK_RATE;             // dpcd 01h
3539   UCHAR               ucDPCD_MAX_LANE_COUNT;            // dpcd 02h
3540   UCHAR               ucDPCD_MAX_DOWNSPREAD;            // dpcd 03h
3541 
3542   USHORT              usMaxPclkFreqInSingleLink;        // Max PixelClock frequency in single link mode.
3543   UCHAR               uceDPToLVDSRxId;
3544   UCHAR               ucLcdReservd;
3545   ULONG               ulReserved[2];
3546 }ATOM_LCD_INFO_V13;
3547 
3548 #define ATOM_LCD_INFO_LAST  ATOM_LCD_INFO_V13
3549 
3550 //Definitions for ucLCD_Misc
3551 #define ATOM_PANEL_MISC_V13_DUAL                   0x00000001
3552 #define ATOM_PANEL_MISC_V13_FPDI                   0x00000002
3553 #define ATOM_PANEL_MISC_V13_GREY_LEVEL             0x0000000C
3554 #define ATOM_PANEL_MISC_V13_GREY_LEVEL_SHIFT       2
3555 #define ATOM_PANEL_MISC_V13_COLOR_BIT_DEPTH_MASK   0x70
3556 #define ATOM_PANEL_MISC_V13_6BIT_PER_COLOR         0x10
3557 #define ATOM_PANEL_MISC_V13_8BIT_PER_COLOR         0x20
3558 
3559 //Color Bit Depth definition in EDID V1.4 @BYTE 14h
3560 //Bit 6  5  4
3561                               //      0  0  0  -  Color bit depth is undefined
3562                               //      0  0  1  -  6 Bits per Primary Color
3563                               //      0  1  0  -  8 Bits per Primary Color
3564                               //      0  1  1  - 10 Bits per Primary Color
3565                               //      1  0  0  - 12 Bits per Primary Color
3566                               //      1  0  1  - 14 Bits per Primary Color
3567                               //      1  1  0  - 16 Bits per Primary Color
3568                               //      1  1  1  - Reserved
3569 
3570 //Definitions for ucLCDPanel_SpecialHandlingCap:
3571 
3572 //Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12.
3573 //Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL
3574 #define	LCDPANEL_CAP_V13_READ_EDID              0x1        // = LCDPANEL_CAP_READ_EDID no change comparing to previous version
3575 
3576 //If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together
3577 //with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static
3578 //refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12
3579 #define	LCDPANEL_CAP_V13_DRR_SUPPORTED          0x2        // = LCDPANEL_CAP_DRR_SUPPORTED no change comparing to previous version
3580 
3581 //Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
3582 #define	LCDPANEL_CAP_V13_eDP                    0x4        // = LCDPANEL_CAP_eDP no change comparing to previous version
3583 
3584 //uceDPToLVDSRxId
3585 #define eDP_TO_LVDS_RX_DISABLE                  0x00       // no eDP->LVDS translator chip
3586 #define eDP_TO_LVDS_COMMON_ID                   0x01       // common eDP->LVDS translator chip without AMD SW init
3587 #define eDP_TO_LVDS_RT_ID                       0x02       // RT tanslator which require AMD SW init
3588 
3589 typedef struct  _ATOM_PATCH_RECORD_MODE
3590 {
3591   UCHAR     ucRecordType;
3592   USHORT    usHDisp;
3593   USHORT    usVDisp;
3594 }ATOM_PATCH_RECORD_MODE;
3595 
3596 typedef struct  _ATOM_LCD_RTS_RECORD
3597 {
3598   UCHAR     ucRecordType;
3599   UCHAR     ucRTSValue;
3600 }ATOM_LCD_RTS_RECORD;
3601 
3602 //!! If the record below exists, it should always be the first record for easy use in command table!!!
3603 // The record below is only used when LVDS_Info is present. From ATOM_LVDS_INFO_V12, use ucLCDPanel_SpecialHandlingCap instead.
3604 typedef struct  _ATOM_LCD_MODE_CONTROL_CAP
3605 {
3606   UCHAR     ucRecordType;
3607   USHORT    usLCDCap;
3608 }ATOM_LCD_MODE_CONTROL_CAP;
3609 
3610 #define LCD_MODE_CAP_BL_OFF                   1
3611 #define LCD_MODE_CAP_CRTC_OFF                 2
3612 #define LCD_MODE_CAP_PANEL_OFF                4
3613 
3614 typedef struct _ATOM_FAKE_EDID_PATCH_RECORD
3615 {
3616   UCHAR ucRecordType;
3617   UCHAR ucFakeEDIDLength;
3618   UCHAR ucFakeEDIDString[];    // This actually has ucFakeEdidLength elements.
3619 } ATOM_FAKE_EDID_PATCH_RECORD;
3620 
3621 typedef struct  _ATOM_PANEL_RESOLUTION_PATCH_RECORD
3622 {
3623    UCHAR    ucRecordType;
3624    USHORT		usHSize;
3625    USHORT		usVSize;
3626 }ATOM_PANEL_RESOLUTION_PATCH_RECORD;
3627 
3628 #define LCD_MODE_PATCH_RECORD_MODE_TYPE       1
3629 #define LCD_RTS_RECORD_TYPE                   2
3630 #define LCD_CAP_RECORD_TYPE                   3
3631 #define LCD_FAKE_EDID_PATCH_RECORD_TYPE       4
3632 #define LCD_PANEL_RESOLUTION_RECORD_TYPE      5
3633 #define LCD_EDID_OFFSET_PATCH_RECORD_TYPE     6
3634 #define ATOM_RECORD_END_TYPE                  0xFF
3635 
3636 /****************************Spread Spectrum Info Table Definitions **********************/
3637 
3638 //ucTableFormatRevision=1
3639 //ucTableContentRevision=2
3640 typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT
3641 {
3642   USHORT              usSpreadSpectrumPercentage;
3643   UCHAR               ucSpreadSpectrumType;	    //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Bit2=1: PCIE REFCLK SS =0 iternal PPLL SS  Others:TBD
3644   UCHAR               ucSS_Step;
3645   UCHAR               ucSS_Delay;
3646   UCHAR               ucSS_Id;
3647   UCHAR               ucRecommendedRef_Div;
3648   UCHAR               ucSS_Range;               //it was reserved for V11
3649 }ATOM_SPREAD_SPECTRUM_ASSIGNMENT;
3650 
3651 #define ATOM_MAX_SS_ENTRY                      16
3652 #define ATOM_DP_SS_ID1												 0x0f1			// SS ID for internal DP stream at 2.7Ghz. if ATOM_DP_SS_ID2 does not exist in SS_InfoTable, it is used for internal DP stream at 1.62Ghz as well.
3653 #define ATOM_DP_SS_ID2												 0x0f2			// SS ID for internal DP stream at 1.62Ghz, if it exists in SS_InfoTable.
3654 #define ATOM_LVLINK_2700MHz_SS_ID              0x0f3      // SS ID for LV link translator chip at 2.7Ghz
3655 #define ATOM_LVLINK_1620MHz_SS_ID              0x0f4      // SS ID for LV link translator chip at 1.62Ghz
3656 
3657 
3658 #define ATOM_SS_DOWN_SPREAD_MODE_MASK          0x00000000
3659 #define ATOM_SS_DOWN_SPREAD_MODE               0x00000000
3660 #define ATOM_SS_CENTRE_SPREAD_MODE_MASK        0x00000001
3661 #define ATOM_SS_CENTRE_SPREAD_MODE             0x00000001
3662 #define ATOM_INTERNAL_SS_MASK                  0x00000000
3663 #define ATOM_EXTERNAL_SS_MASK                  0x00000002
3664 #define EXEC_SS_STEP_SIZE_SHIFT                2
3665 #define EXEC_SS_DELAY_SHIFT                    4
3666 #define ACTIVEDATA_TO_BLON_DELAY_SHIFT         4
3667 
3668 typedef struct _ATOM_SPREAD_SPECTRUM_INFO
3669 {
3670   ATOM_COMMON_TABLE_HEADER	sHeader;
3671   ATOM_SPREAD_SPECTRUM_ASSIGNMENT   asSS_Info[ATOM_MAX_SS_ENTRY];
3672 }ATOM_SPREAD_SPECTRUM_INFO;
3673 
3674 /****************************************************************************/
3675 // Structure used in AnalogTV_InfoTable (Top level)
3676 /****************************************************************************/
3677 //ucTVBootUpDefaultStd definition:
3678 
3679 //ATOM_TV_NTSC                1
3680 //ATOM_TV_NTSCJ               2
3681 //ATOM_TV_PAL                 3
3682 //ATOM_TV_PALM                4
3683 //ATOM_TV_PALCN               5
3684 //ATOM_TV_PALN                6
3685 //ATOM_TV_PAL60               7
3686 //ATOM_TV_SECAM               8
3687 
3688 //ucTVSupportedStd definition:
3689 #define NTSC_SUPPORT          0x1
3690 #define NTSCJ_SUPPORT         0x2
3691 
3692 #define PAL_SUPPORT           0x4
3693 #define PALM_SUPPORT          0x8
3694 #define PALCN_SUPPORT         0x10
3695 #define PALN_SUPPORT          0x20
3696 #define PAL60_SUPPORT         0x40
3697 #define SECAM_SUPPORT         0x80
3698 
3699 #define MAX_SUPPORTED_TV_TIMING    2
3700 
3701 typedef struct _ATOM_ANALOG_TV_INFO
3702 {
3703   ATOM_COMMON_TABLE_HEADER sHeader;
3704   UCHAR                    ucTV_SupportedStandard;
3705   UCHAR                    ucTV_BootUpDefaultStandard;
3706   UCHAR                    ucExt_TV_ASIC_ID;
3707   UCHAR                    ucExt_TV_ASIC_SlaveAddr;
3708   /*ATOM_DTD_FORMAT          aModeTimings[MAX_SUPPORTED_TV_TIMING];*/
3709   ATOM_MODE_TIMING         aModeTimings[MAX_SUPPORTED_TV_TIMING];
3710 }ATOM_ANALOG_TV_INFO;
3711 
3712 #define MAX_SUPPORTED_TV_TIMING_V1_2    3
3713 
3714 typedef struct _ATOM_ANALOG_TV_INFO_V1_2
3715 {
3716   ATOM_COMMON_TABLE_HEADER sHeader;
3717   UCHAR                    ucTV_SupportedStandard;
3718   UCHAR                    ucTV_BootUpDefaultStandard;
3719   UCHAR                    ucExt_TV_ASIC_ID;
3720   UCHAR                    ucExt_TV_ASIC_SlaveAddr;
3721   ATOM_DTD_FORMAT          aModeTimings[MAX_SUPPORTED_TV_TIMING_V1_2];
3722 }ATOM_ANALOG_TV_INFO_V1_2;
3723 
3724 typedef struct _ATOM_DPCD_INFO
3725 {
3726   UCHAR   ucRevisionNumber;        //10h : Revision 1.0; 11h : Revision 1.1
3727   UCHAR   ucMaxLinkRate;           //06h : 1.62Gbps per lane; 0Ah = 2.7Gbps per lane
3728   UCHAR   ucMaxLane;               //Bits 4:0 = MAX_LANE_COUNT (1/2/4). Bit 7 = ENHANCED_FRAME_CAP
3729   UCHAR   ucMaxDownSpread;         //Bit0 = 0: No Down spread; Bit0 = 1: 0.5% (Subject to change according to DP spec)
3730 }ATOM_DPCD_INFO;
3731 
3732 #define ATOM_DPCD_MAX_LANE_MASK    0x1F
3733 
3734 /**************************************************************************/
3735 // VRAM usage and their defintions
3736 
3737 // One chunk of VRAM used by Bios are for HWICON surfaces,EDID data.
3738 // Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below.
3739 // All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned!
3740 // To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR
3741 // To Bios:  ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX
3742 
3743 #ifndef VESA_MEMORY_IN_64K_BLOCK
3744 #define VESA_MEMORY_IN_64K_BLOCK        0x100       //256*64K=16Mb (Max. VESA memory is 16Mb!)
3745 #endif
3746 
3747 #define ATOM_EDID_RAW_DATASIZE          256         //In Bytes
3748 #define ATOM_HWICON_SURFACE_SIZE        4096        //In Bytes
3749 #define ATOM_HWICON_INFOTABLE_SIZE      32
3750 #define MAX_DTD_MODE_IN_VRAM            6
3751 #define ATOM_DTD_MODE_SUPPORT_TBL_SIZE  (MAX_DTD_MODE_IN_VRAM*28)    //28= (SIZEOF ATOM_DTD_FORMAT)
3752 #define ATOM_STD_MODE_SUPPORT_TBL_SIZE  32*8                         //32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT)
3753 //20 bytes for Encoder Type and DPCD in STD EDID area
3754 #define DFP_ENCODER_TYPE_OFFSET         (ATOM_EDID_RAW_DATASIZE + ATOM_DTD_MODE_SUPPORT_TBL_SIZE + ATOM_STD_MODE_SUPPORT_TBL_SIZE - 20)
3755 #define ATOM_DP_DPCD_OFFSET             (DFP_ENCODER_TYPE_OFFSET + 4 )
3756 
3757 #define ATOM_HWICON1_SURFACE_ADDR       0
3758 #define ATOM_HWICON2_SURFACE_ADDR       (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
3759 #define ATOM_HWICON_INFOTABLE_ADDR      (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
3760 #define ATOM_CRT1_EDID_ADDR             (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE)
3761 #define ATOM_CRT1_DTD_MODE_TBL_ADDR     (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3762 #define ATOM_CRT1_STD_MODE_TBL_ADDR	    (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3763 
3764 #define ATOM_LCD1_EDID_ADDR             (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3765 #define ATOM_LCD1_DTD_MODE_TBL_ADDR     (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3766 #define ATOM_LCD1_STD_MODE_TBL_ADDR   	(ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3767 
3768 #define ATOM_TV1_DTD_MODE_TBL_ADDR      (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3769 
3770 #define ATOM_DFP1_EDID_ADDR             (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3771 #define ATOM_DFP1_DTD_MODE_TBL_ADDR     (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3772 #define ATOM_DFP1_STD_MODE_TBL_ADDR	    (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3773 
3774 #define ATOM_CRT2_EDID_ADDR             (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3775 #define ATOM_CRT2_DTD_MODE_TBL_ADDR     (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3776 #define ATOM_CRT2_STD_MODE_TBL_ADDR	    (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3777 
3778 #define ATOM_LCD2_EDID_ADDR             (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3779 #define ATOM_LCD2_DTD_MODE_TBL_ADDR     (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3780 #define ATOM_LCD2_STD_MODE_TBL_ADDR   	(ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3781 
3782 #define ATOM_DFP6_EDID_ADDR             (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3783 #define ATOM_DFP6_DTD_MODE_TBL_ADDR     (ATOM_DFP6_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3784 #define ATOM_DFP6_STD_MODE_TBL_ADDR     (ATOM_DFP6_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3785 
3786 #define ATOM_DFP2_EDID_ADDR             (ATOM_DFP6_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3787 #define ATOM_DFP2_DTD_MODE_TBL_ADDR     (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3788 #define ATOM_DFP2_STD_MODE_TBL_ADDR     (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3789 
3790 #define ATOM_CV_EDID_ADDR               (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3791 #define ATOM_CV_DTD_MODE_TBL_ADDR       (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3792 #define ATOM_CV_STD_MODE_TBL_ADDR       (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3793 
3794 #define ATOM_DFP3_EDID_ADDR             (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3795 #define ATOM_DFP3_DTD_MODE_TBL_ADDR     (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3796 #define ATOM_DFP3_STD_MODE_TBL_ADDR     (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3797 
3798 #define ATOM_DFP4_EDID_ADDR             (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3799 #define ATOM_DFP4_DTD_MODE_TBL_ADDR     (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3800 #define ATOM_DFP4_STD_MODE_TBL_ADDR     (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3801 
3802 #define ATOM_DFP5_EDID_ADDR             (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3803 #define ATOM_DFP5_DTD_MODE_TBL_ADDR     (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
3804 #define ATOM_DFP5_STD_MODE_TBL_ADDR     (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
3805 
3806 #define ATOM_DP_TRAINING_TBL_ADDR       (ATOM_DFP5_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
3807 
3808 #define ATOM_STACK_STORAGE_START        (ATOM_DP_TRAINING_TBL_ADDR + 1024)
3809 #define ATOM_STACK_STORAGE_END          ATOM_STACK_STORAGE_START + 512
3810 
3811 //The size below is in Kb!
3812 #define ATOM_VRAM_RESERVE_SIZE         ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC)
3813 
3814 #define ATOM_VRAM_RESERVE_V2_SIZE      32
3815 
3816 #define	ATOM_VRAM_OPERATION_FLAGS_MASK         0xC0000000L
3817 #define ATOM_VRAM_OPERATION_FLAGS_SHIFT        30
3818 #define	ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION   0x1
3819 #define	ATOM_VRAM_BLOCK_NEEDS_RESERVATION      0x0
3820 
3821 /***********************************************************************************/
3822 // Structure used in VRAM_UsageByFirmwareTable
3823 // Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm
3824 //        at running time.
3825 // note2: From RV770, the memory is more than 32bit addressable, so we will change
3826 //        ucTableFormatRevision=1,ucTableContentRevision=4, the structure remains
3827 //        exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware
3828 //        (in offset to start of memory address) is KB aligned instead of byte aligend.
3829 /***********************************************************************************/
3830 // Note3:
3831 /* If we change usReserved to "usFBUsedbyDrvInKB", then to VBIOS this usFBUsedbyDrvInKB is a predefined, unchanged constant across VGA or non VGA adapter,
3832 for CAIL, The size of FB access area is known, only thing missing is the Offset of FB Access area, so we can  have:
3833 
3834 If (ulStartAddrUsedByFirmware!=0)
3835 FBAccessAreaOffset= ulStartAddrUsedByFirmware - usFBUsedbyDrvInKB;
3836 Reserved area has been claimed by VBIOS including this FB access area; CAIL doesn't need to reserve any extra area for this purpose
3837 else	//Non VGA case
3838  if (FB_Size<=2Gb)
3839     FBAccessAreaOffset= FB_Size - usFBUsedbyDrvInKB;
3840  else
3841 	  FBAccessAreaOffset= Aper_Size - usFBUsedbyDrvInKB
3842 
3843 CAIL needs to claim an reserved area defined by FBAccessAreaOffset and usFBUsedbyDrvInKB in non VGA case.*/
3844 
3845 /***********************************************************************************/
3846 #define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO			1
3847 
3848 typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO
3849 {
3850   ULONG   ulStartAddrUsedByFirmware;
3851   USHORT  usFirmwareUseInKb;
3852   USHORT  usReserved;
3853 }ATOM_FIRMWARE_VRAM_RESERVE_INFO;
3854 
3855 typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE
3856 {
3857   ATOM_COMMON_TABLE_HEADER sHeader;
3858   ATOM_FIRMWARE_VRAM_RESERVE_INFO	asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO];
3859 }ATOM_VRAM_USAGE_BY_FIRMWARE;
3860 
3861 // change version to 1.5, when allow driver to allocate the vram area for command table access.
3862 typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5
3863 {
3864   ULONG   ulStartAddrUsedByFirmware;
3865   USHORT  usFirmwareUseInKb;
3866   USHORT  usFBUsedByDrvInKb;
3867 }ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5;
3868 
3869 typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE_V1_5
3870 {
3871   ATOM_COMMON_TABLE_HEADER sHeader;
3872   ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5	asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO];
3873 }ATOM_VRAM_USAGE_BY_FIRMWARE_V1_5;
3874 
3875 /****************************************************************************/
3876 // Structure used in GPIO_Pin_LUTTable
3877 /****************************************************************************/
3878 typedef struct _ATOM_GPIO_PIN_ASSIGNMENT
3879 {
3880   USHORT                   usGpioPin_AIndex;
3881   UCHAR                    ucGpioPinBitShift;
3882   UCHAR                    ucGPIO_ID;
3883 }ATOM_GPIO_PIN_ASSIGNMENT;
3884 
3885 //ucGPIO_ID pre-define id for multiple usage
3886 //from SMU7.x, if ucGPIO_ID=PP_AC_DC_SWITCH_GPIO_PINID in GPIO_LUTTable, AC/DC switching feature is enable
3887 #define PP_AC_DC_SWITCH_GPIO_PINID          60
3888 //from SMU7.x, if ucGPIO_ID=VDDC_REGULATOR_VRHOT_GPIO_PINID in GPIO_LUTable, VRHot feature is enable
3889 #define VDDC_VRHOT_GPIO_PINID               61
3890 //if ucGPIO_ID=VDDC_PCC_GPIO_PINID in GPIO_LUTable, Peak Current Control feature is enabled
3891 #define VDDC_PCC_GPIO_PINID                 62
3892 
3893 typedef struct _ATOM_GPIO_PIN_LUT
3894 {
3895   ATOM_COMMON_TABLE_HEADER  sHeader;
3896   ATOM_GPIO_PIN_ASSIGNMENT	asGPIO_Pin[1];
3897 }ATOM_GPIO_PIN_LUT;
3898 
3899 /****************************************************************************/
3900 // Structure used in ComponentVideoInfoTable
3901 /****************************************************************************/
3902 #define GPIO_PIN_ACTIVE_HIGH          0x1
3903 
3904 #define MAX_SUPPORTED_CV_STANDARDS    5
3905 
3906 // definitions for ATOM_D_INFO.ucSettings
3907 #define ATOM_GPIO_SETTINGS_BITSHIFT_MASK  0x1F    // [4:0]
3908 #define ATOM_GPIO_SETTINGS_RESERVED_MASK  0x60    // [6:5] = must be zeroed out
3909 #define ATOM_GPIO_SETTINGS_ACTIVE_MASK    0x80    // [7]
3910 
3911 typedef struct _ATOM_GPIO_INFO
3912 {
3913   USHORT  usAOffset;
3914   UCHAR   ucSettings;
3915   UCHAR   ucReserved;
3916 }ATOM_GPIO_INFO;
3917 
3918 // definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector)
3919 #define ATOM_CV_RESTRICT_FORMAT_SELECTION           0x2
3920 
3921 // definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i
3922 #define ATOM_GPIO_DEFAULT_MODE_EN                   0x80 //[7];
3923 #define ATOM_GPIO_SETTING_PERMODE_MASK              0x7F //[6:0]
3924 
3925 // definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode
3926 //Line 3 out put 5V.
3927 #define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A       0x01     //represent gpio 3 state for 16:9
3928 #define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B       0x02     //represent gpio 4 state for 16:9
3929 #define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT   0x0
3930 
3931 //Line 3 out put 2.2V
3932 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04     //represent gpio 3 state for 4:3 Letter box
3933 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08     //represent gpio 4 state for 4:3 Letter box
3934 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2
3935 
3936 //Line 3 out put 0V
3937 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A        0x10     //represent gpio 3 state for 4:3
3938 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B        0x20     //represent gpio 4 state for 4:3
3939 #define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT    0x4
3940 
3941 #define ATOM_CV_LINE3_ASPECTRATIO_MASK              0x3F     // bit [5:0]
3942 
3943 #define ATOM_CV_LINE3_ASPECTRATIO_EXIST             0x80     //bit 7
3944 
3945 //GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks.
3946 #define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A   3   //bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode.
3947 #define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B   4   //bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode.
3948 
3949 
3950 typedef struct _ATOM_COMPONENT_VIDEO_INFO
3951 {
3952   ATOM_COMMON_TABLE_HEADER sHeader;
3953   USHORT             usMask_PinRegisterIndex;
3954   USHORT             usEN_PinRegisterIndex;
3955   USHORT             usY_PinRegisterIndex;
3956   USHORT             usA_PinRegisterIndex;
3957   UCHAR              ucBitShift;
3958   UCHAR              ucPinActiveState;  //ucPinActiveState: Bit0=1 active high, =0 active low
3959   ATOM_DTD_FORMAT    sReserved;         // must be zeroed out
3960   UCHAR              ucMiscInfo;
3961   UCHAR              uc480i;
3962   UCHAR              uc480p;
3963   UCHAR              uc720p;
3964   UCHAR              uc1080i;
3965   UCHAR              ucLetterBoxMode;
3966   UCHAR              ucReserved[3];
3967   UCHAR              ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector
3968   ATOM_GPIO_INFO     aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
3969   ATOM_DTD_FORMAT    aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
3970 }ATOM_COMPONENT_VIDEO_INFO;
3971 
3972 //ucTableFormatRevision=2
3973 //ucTableContentRevision=1
3974 typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21
3975 {
3976   ATOM_COMMON_TABLE_HEADER sHeader;
3977   UCHAR              ucMiscInfo;
3978   UCHAR              uc480i;
3979   UCHAR              uc480p;
3980   UCHAR              uc720p;
3981   UCHAR              uc1080i;
3982   UCHAR              ucReserved;
3983   UCHAR              ucLetterBoxMode;
3984   UCHAR              ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector
3985   ATOM_GPIO_INFO     aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
3986   ATOM_DTD_FORMAT    aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
3987 }ATOM_COMPONENT_VIDEO_INFO_V21;
3988 
3989 #define ATOM_COMPONENT_VIDEO_INFO_LAST  ATOM_COMPONENT_VIDEO_INFO_V21
3990 
3991 /****************************************************************************/
3992 // Structure used in object_InfoTable
3993 /****************************************************************************/
3994 typedef struct _ATOM_OBJECT_HEADER
3995 {
3996   ATOM_COMMON_TABLE_HEADER	sHeader;
3997   USHORT                    usDeviceSupport;
3998   USHORT                    usConnectorObjectTableOffset;
3999   USHORT                    usRouterObjectTableOffset;
4000   USHORT                    usEncoderObjectTableOffset;
4001   USHORT                    usProtectionObjectTableOffset; //only available when Protection block is independent.
4002   USHORT                    usDisplayPathTableOffset;
4003 }ATOM_OBJECT_HEADER;
4004 
4005 typedef struct _ATOM_OBJECT_HEADER_V3
4006 {
4007   ATOM_COMMON_TABLE_HEADER	sHeader;
4008   USHORT                    usDeviceSupport;
4009   USHORT                    usConnectorObjectTableOffset;
4010   USHORT                    usRouterObjectTableOffset;
4011   USHORT                    usEncoderObjectTableOffset;
4012   USHORT                    usProtectionObjectTableOffset; //only available when Protection block is independent.
4013   USHORT                    usDisplayPathTableOffset;
4014   USHORT                    usMiscObjectTableOffset;
4015 }ATOM_OBJECT_HEADER_V3;
4016 
4017 typedef struct  _ATOM_DISPLAY_OBJECT_PATH
4018 {
4019   USHORT    usDeviceTag;                                   //supported device
4020   USHORT    usSize;                                        //the size of ATOM_DISPLAY_OBJECT_PATH
4021   USHORT    usConnObjectId;                                //Connector Object ID
4022   USHORT    usGPUObjectId;                                 //GPU ID
4023   USHORT    usGraphicObjIds[];                             //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector.
4024 }ATOM_DISPLAY_OBJECT_PATH;
4025 
4026 typedef struct  _ATOM_DISPLAY_EXTERNAL_OBJECT_PATH
4027 {
4028   USHORT    usDeviceTag;                                   //supported device
4029   USHORT    usSize;                                        //the size of ATOM_DISPLAY_OBJECT_PATH
4030   USHORT    usConnObjectId;                                //Connector Object ID
4031   USHORT    usGPUObjectId;                                 //GPU ID
4032   USHORT    usGraphicObjIds[2];                            //usGraphicObjIds[0]= GPU internal encoder, usGraphicObjIds[1]= external encoder
4033 }ATOM_DISPLAY_EXTERNAL_OBJECT_PATH;
4034 
4035 typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE
4036 {
4037   UCHAR                           ucNumOfDispPath;
4038   UCHAR                           ucVersion;
4039   UCHAR                           ucPadding[2];
4040   ATOM_DISPLAY_OBJECT_PATH        asDispPath[];
4041 }ATOM_DISPLAY_OBJECT_PATH_TABLE;
4042 
4043 
4044 typedef struct _ATOM_OBJECT                                //each object has this structure
4045 {
4046   USHORT              usObjectID;
4047   USHORT              usSrcDstTableOffset;
4048   USHORT              usRecordOffset;                     //this pointing to a bunch of records defined below
4049   USHORT              usReserved;
4050 }ATOM_OBJECT;
4051 
4052 typedef struct _ATOM_OBJECT_TABLE                         //Above 4 object table offset pointing to a bunch of objects all have this structure
4053 {
4054   UCHAR               ucNumberOfObjects;
4055   UCHAR               ucPadding[3];
4056   ATOM_OBJECT         asObjects[];
4057 }ATOM_OBJECT_TABLE;
4058 
4059 typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT         //usSrcDstTableOffset pointing to this structure
4060 {
4061   UCHAR               ucNumberOfSrc;
4062   USHORT              usSrcObjectID[1];
4063   UCHAR               ucNumberOfDst;
4064   USHORT              usDstObjectID[1];
4065 }ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;
4066 
4067 
4068 //Two definitions below are for OPM on MXM module designs
4069 
4070 #define EXT_HPDPIN_LUTINDEX_0                   0
4071 #define EXT_HPDPIN_LUTINDEX_1                   1
4072 #define EXT_HPDPIN_LUTINDEX_2                   2
4073 #define EXT_HPDPIN_LUTINDEX_3                   3
4074 #define EXT_HPDPIN_LUTINDEX_4                   4
4075 #define EXT_HPDPIN_LUTINDEX_5                   5
4076 #define EXT_HPDPIN_LUTINDEX_6                   6
4077 #define EXT_HPDPIN_LUTINDEX_7                   7
4078 #define MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES   (EXT_HPDPIN_LUTINDEX_7+1)
4079 
4080 #define EXT_AUXDDC_LUTINDEX_0                   0
4081 #define EXT_AUXDDC_LUTINDEX_1                   1
4082 #define EXT_AUXDDC_LUTINDEX_2                   2
4083 #define EXT_AUXDDC_LUTINDEX_3                   3
4084 #define EXT_AUXDDC_LUTINDEX_4                   4
4085 #define EXT_AUXDDC_LUTINDEX_5                   5
4086 #define EXT_AUXDDC_LUTINDEX_6                   6
4087 #define EXT_AUXDDC_LUTINDEX_7                   7
4088 #define MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES   (EXT_AUXDDC_LUTINDEX_7+1)
4089 
4090 //ucChannelMapping are defined as following
4091 //for DP connector, eDP, DP to VGA/LVDS
4092 //Bit[1:0]: Define which pin connect to DP connector DP_Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4093 //Bit[3:2]: Define which pin connect to DP connector DP_Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4094 //Bit[5:4]: Define which pin connect to DP connector DP_Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4095 //Bit[7:6]: Define which pin connect to DP connector DP_Lane3, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4096 typedef struct _ATOM_DP_CONN_CHANNEL_MAPPING
4097 {
4098 #if ATOM_BIG_ENDIAN
4099   UCHAR ucDP_Lane3_Source:2;
4100   UCHAR ucDP_Lane2_Source:2;
4101   UCHAR ucDP_Lane1_Source:2;
4102   UCHAR ucDP_Lane0_Source:2;
4103 #else
4104   UCHAR ucDP_Lane0_Source:2;
4105   UCHAR ucDP_Lane1_Source:2;
4106   UCHAR ucDP_Lane2_Source:2;
4107   UCHAR ucDP_Lane3_Source:2;
4108 #endif
4109 }ATOM_DP_CONN_CHANNEL_MAPPING;
4110 
4111 //for DVI/HDMI, in dual link case, both links have to have same mapping.
4112 //Bit[1:0]: Define which pin connect to DVI connector data Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4113 //Bit[3:2]: Define which pin connect to DVI connector data Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4114 //Bit[5:4]: Define which pin connect to DVI connector data Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4115 //Bit[7:6]: Define which pin connect to DVI connector clock lane, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
4116 typedef struct _ATOM_DVI_CONN_CHANNEL_MAPPING
4117 {
4118 #if ATOM_BIG_ENDIAN
4119   UCHAR ucDVI_CLK_Source:2;
4120   UCHAR ucDVI_DATA0_Source:2;
4121   UCHAR ucDVI_DATA1_Source:2;
4122   UCHAR ucDVI_DATA2_Source:2;
4123 #else
4124   UCHAR ucDVI_DATA2_Source:2;
4125   UCHAR ucDVI_DATA1_Source:2;
4126   UCHAR ucDVI_DATA0_Source:2;
4127   UCHAR ucDVI_CLK_Source:2;
4128 #endif
4129 }ATOM_DVI_CONN_CHANNEL_MAPPING;
4130 
4131 typedef struct _EXT_DISPLAY_PATH
4132 {
4133   USHORT  usDeviceTag;                    //A bit vector to show what devices are supported
4134   USHORT  usDeviceACPIEnum;               //16bit device ACPI id.
4135   USHORT  usDeviceConnector;              //A physical connector for displays to plug in, using object connector definitions
4136   UCHAR   ucExtAUXDDCLutIndex;            //An index into external AUX/DDC channel LUT
4137   UCHAR   ucExtHPDPINLutIndex;            //An index into external HPD pin LUT
4138   USHORT  usExtEncoderObjId;              //external encoder object id
4139   union{
4140     UCHAR   ucChannelMapping;                  // if ucChannelMapping=0, using default one to one mapping
4141     ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping;
4142     ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping;
4143   };
4144   UCHAR   ucChPNInvert;                   // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted
4145   USHORT  usCaps;
4146   USHORT  usReserved;
4147 }EXT_DISPLAY_PATH;
4148 
4149 #define NUMBER_OF_UCHAR_FOR_GUID          16
4150 #define MAX_NUMBER_OF_EXT_DISPLAY_PATH    7
4151 
4152 //usCaps
4153 #define  EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE          0x01
4154 #define  EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN        0x02
4155 
4156 typedef  struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
4157 {
4158   ATOM_COMMON_TABLE_HEADER sHeader;
4159   UCHAR                    ucGuid [NUMBER_OF_UCHAR_FOR_GUID];     // a GUID is a 16 byte long string
4160   EXT_DISPLAY_PATH         sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries.
4161   UCHAR                    ucChecksum;                            // a simple Checksum of the sum of whole structure equal to 0x0.
4162   UCHAR                    uc3DStereoPinId;                       // use for eDP panel
4163   UCHAR                    ucRemoteDisplayConfig;
4164   UCHAR                    uceDPToLVDSRxId;
4165   UCHAR                    ucFixDPVoltageSwing;                   // usCaps[1]=1, this indicate DP_LANE_SET value
4166   UCHAR                    Reserved[3];                           // for potential expansion
4167 }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;
4168 
4169 //Related definitions, all records are different but they have a commond header
4170 typedef struct _ATOM_COMMON_RECORD_HEADER
4171 {
4172   UCHAR               ucRecordType;                      //An emun to indicate the record type
4173   UCHAR               ucRecordSize;                      //The size of the whole record in byte
4174 }ATOM_COMMON_RECORD_HEADER;
4175 
4176 
4177 #define ATOM_I2C_RECORD_TYPE                           1
4178 #define ATOM_HPD_INT_RECORD_TYPE                       2
4179 #define ATOM_OUTPUT_PROTECTION_RECORD_TYPE             3
4180 #define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE          4
4181 #define	ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE	     5 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
4182 #define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE          6 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
4183 #define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE      7
4184 #define ATOM_JTAG_RECORD_TYPE                          8 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
4185 #define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE              9
4186 #define ATOM_ENCODER_DVO_CF_RECORD_TYPE               10
4187 #define ATOM_CONNECTOR_CF_RECORD_TYPE                 11
4188 #define	ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE	      12
4189 #define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE  13
4190 #define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE	      14
4191 #define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE	15
4192 #define ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE          16 //This is for the case when connectors are not known to object table
4193 #define ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE          17 //This is for the case when connectors are not known to object table
4194 #define ATOM_OBJECT_LINK_RECORD_TYPE                   18 //Once this record is present under one object, it indicats the oobject is linked to another obj described by the record
4195 #define ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE          19
4196 #define ATOM_ENCODER_CAP_RECORD_TYPE                   20
4197 #define ATOM_BRACKET_LAYOUT_RECORD_TYPE                21
4198 
4199 //Must be updated when new record type is added,equal to that record definition!
4200 #define ATOM_MAX_OBJECT_RECORD_NUMBER             ATOM_BRACKET_LAYOUT_RECORD_TYPE
4201 
4202 typedef struct  _ATOM_I2C_RECORD
4203 {
4204   ATOM_COMMON_RECORD_HEADER   sheader;
4205   ATOM_I2C_ID_CONFIG          sucI2cId;
4206   UCHAR                       ucI2CAddr;              //The slave address, it's 0 when the record is attached to connector for DDC
4207 }ATOM_I2C_RECORD;
4208 
4209 typedef struct  _ATOM_HPD_INT_RECORD
4210 {
4211   ATOM_COMMON_RECORD_HEADER   sheader;
4212   UCHAR                       ucHPDIntGPIOID;         //Corresponding block in GPIO_PIN_INFO table gives the pin info
4213   UCHAR                       ucPlugged_PinState;
4214 }ATOM_HPD_INT_RECORD;
4215 
4216 
4217 typedef struct  _ATOM_OUTPUT_PROTECTION_RECORD
4218 {
4219   ATOM_COMMON_RECORD_HEADER   sheader;
4220   UCHAR                       ucProtectionFlag;
4221   UCHAR                       ucReserved;
4222 }ATOM_OUTPUT_PROTECTION_RECORD;
4223 
4224 typedef struct  _ATOM_CONNECTOR_DEVICE_TAG
4225 {
4226   ULONG                       ulACPIDeviceEnum;       //Reserved for now
4227   USHORT                      usDeviceID;             //This Id is same as "ATOM_DEVICE_XXX_SUPPORT"
4228   USHORT                      usPadding;
4229 }ATOM_CONNECTOR_DEVICE_TAG;
4230 
4231 typedef struct  _ATOM_CONNECTOR_DEVICE_TAG_RECORD
4232 {
4233   ATOM_COMMON_RECORD_HEADER   sheader;
4234   UCHAR                       ucNumberOfDevice;
4235   UCHAR                       ucReserved;
4236   ATOM_CONNECTOR_DEVICE_TAG   asDeviceTag[1];         //This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation
4237 }ATOM_CONNECTOR_DEVICE_TAG_RECORD;
4238 
4239 
4240 typedef struct  _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD
4241 {
4242   ATOM_COMMON_RECORD_HEADER   sheader;
4243   UCHAR						            ucConfigGPIOID;
4244   UCHAR						            ucConfigGPIOState;	    //Set to 1 when it's active high to enable external flow in
4245   UCHAR                       ucFlowinGPIPID;
4246   UCHAR                       ucExtInGPIPID;
4247 }ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD;
4248 
4249 typedef struct  _ATOM_ENCODER_FPGA_CONTROL_RECORD
4250 {
4251   ATOM_COMMON_RECORD_HEADER   sheader;
4252   UCHAR                       ucCTL1GPIO_ID;
4253   UCHAR                       ucCTL1GPIOState;        //Set to 1 when it's active high
4254   UCHAR                       ucCTL2GPIO_ID;
4255   UCHAR                       ucCTL2GPIOState;        //Set to 1 when it's active high
4256   UCHAR                       ucCTL3GPIO_ID;
4257   UCHAR                       ucCTL3GPIOState;        //Set to 1 when it's active high
4258   UCHAR                       ucCTLFPGA_IN_ID;
4259   UCHAR                       ucPadding[3];
4260 }ATOM_ENCODER_FPGA_CONTROL_RECORD;
4261 
4262 typedef struct  _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD
4263 {
4264   ATOM_COMMON_RECORD_HEADER   sheader;
4265   UCHAR                       ucGPIOID;               //Corresponding block in GPIO_PIN_INFO table gives the pin info
4266   UCHAR                       ucTVActiveState;        //Indicating when the pin==0 or 1 when TV is connected
4267 }ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD;
4268 
4269 typedef struct  _ATOM_JTAG_RECORD
4270 {
4271   ATOM_COMMON_RECORD_HEADER   sheader;
4272   UCHAR                       ucTMSGPIO_ID;
4273   UCHAR                       ucTMSGPIOState;         //Set to 1 when it's active high
4274   UCHAR                       ucTCKGPIO_ID;
4275   UCHAR                       ucTCKGPIOState;         //Set to 1 when it's active high
4276   UCHAR                       ucTDOGPIO_ID;
4277   UCHAR                       ucTDOGPIOState;         //Set to 1 when it's active high
4278   UCHAR                       ucTDIGPIO_ID;
4279   UCHAR                       ucTDIGPIOState;         //Set to 1 when it's active high
4280   UCHAR                       ucPadding[2];
4281 }ATOM_JTAG_RECORD;
4282 
4283 
4284 //The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually
4285 typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR
4286 {
4287   UCHAR                       ucGPIOID;               // GPIO_ID, find the corresponding ID in GPIO_LUT table
4288   UCHAR                       ucGPIO_PinState;        // Pin state showing how to set-up the pin
4289 }ATOM_GPIO_PIN_CONTROL_PAIR;
4290 
4291 typedef struct  _ATOM_OBJECT_GPIO_CNTL_RECORD
4292 {
4293   ATOM_COMMON_RECORD_HEADER   sheader;
4294   UCHAR                       ucFlags;                // Future expnadibility
4295   UCHAR                       ucNumberOfPins;         // Number of GPIO pins used to control the object
4296   ATOM_GPIO_PIN_CONTROL_PAIR  asGpio[1];              // the real gpio pin pair determined by number of pins ucNumberOfPins
4297 }ATOM_OBJECT_GPIO_CNTL_RECORD;
4298 
4299 //Definitions for GPIO pin state
4300 #define GPIO_PIN_TYPE_INPUT             0x00
4301 #define GPIO_PIN_TYPE_OUTPUT            0x10
4302 #define GPIO_PIN_TYPE_HW_CONTROL        0x20
4303 
4304 //For GPIO_PIN_TYPE_OUTPUT the following is defined
4305 #define GPIO_PIN_OUTPUT_STATE_MASK      0x01
4306 #define GPIO_PIN_OUTPUT_STATE_SHIFT     0
4307 #define GPIO_PIN_STATE_ACTIVE_LOW       0x0
4308 #define GPIO_PIN_STATE_ACTIVE_HIGH      0x1
4309 
4310 // Indexes to GPIO array in GLSync record
4311 // GLSync record is for Frame Lock/Gen Lock feature.
4312 #define ATOM_GPIO_INDEX_GLSYNC_REFCLK    0
4313 #define ATOM_GPIO_INDEX_GLSYNC_HSYNC     1
4314 #define ATOM_GPIO_INDEX_GLSYNC_VSYNC     2
4315 #define ATOM_GPIO_INDEX_GLSYNC_SWAP_REQ  3
4316 #define ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT  4
4317 #define ATOM_GPIO_INDEX_GLSYNC_INTERRUPT 5
4318 #define ATOM_GPIO_INDEX_GLSYNC_V_RESET   6
4319 #define ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL 7
4320 #define ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL  8
4321 #define ATOM_GPIO_INDEX_GLSYNC_MAX       9
4322 
4323 typedef struct  _ATOM_ENCODER_DVO_CF_RECORD
4324 {
4325   ATOM_COMMON_RECORD_HEADER   sheader;
4326   ULONG                       ulStrengthControl;      // DVOA strength control for CF
4327   UCHAR                       ucPadding[2];
4328 }ATOM_ENCODER_DVO_CF_RECORD;
4329 
4330 // Bit maps for ATOM_ENCODER_CAP_RECORD.ucEncoderCap
4331 #define ATOM_ENCODER_CAP_RECORD_HBR2                  0x01         // DP1.2 HBR2 is supported by HW encoder
4332 #define ATOM_ENCODER_CAP_RECORD_HBR2_EN               0x02         // DP1.2 HBR2 setting is qualified and HBR2 can be enabled
4333 
4334 typedef struct  _ATOM_ENCODER_CAP_RECORD
4335 {
4336   ATOM_COMMON_RECORD_HEADER   sheader;
4337   union {
4338     USHORT                    usEncoderCap;
4339     struct {
4340 #if ATOM_BIG_ENDIAN
4341       USHORT                  usReserved:14;        // Bit1-15 may be defined for other capability in future
4342       USHORT                  usHBR2En:1;           // Bit1 is for DP1.2 HBR2 enable
4343       USHORT                  usHBR2Cap:1;          // Bit0 is for DP1.2 HBR2 capability.
4344 #else
4345       USHORT                  usHBR2Cap:1;          // Bit0 is for DP1.2 HBR2 capability.
4346       USHORT                  usHBR2En:1;           // Bit1 is for DP1.2 HBR2 enable
4347       USHORT                  usReserved:14;        // Bit1-15 may be defined for other capability in future
4348 #endif
4349     };
4350   };
4351 }ATOM_ENCODER_CAP_RECORD;
4352 
4353 // value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle
4354 #define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA   1
4355 #define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB   2
4356 
4357 typedef struct  _ATOM_CONNECTOR_CF_RECORD
4358 {
4359   ATOM_COMMON_RECORD_HEADER   sheader;
4360   USHORT                      usMaxPixClk;
4361   UCHAR                       ucFlowCntlGpioId;
4362   UCHAR                       ucSwapCntlGpioId;
4363   UCHAR                       ucConnectedDvoBundle;
4364   UCHAR                       ucPadding;
4365 }ATOM_CONNECTOR_CF_RECORD;
4366 
4367 typedef struct  _ATOM_CONNECTOR_HARDCODE_DTD_RECORD
4368 {
4369   ATOM_COMMON_RECORD_HEADER   sheader;
4370 	ATOM_DTD_FORMAT							asTiming;
4371 }ATOM_CONNECTOR_HARDCODE_DTD_RECORD;
4372 
4373 typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD
4374 {
4375   ATOM_COMMON_RECORD_HEADER   sheader;                //ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE
4376   UCHAR                       ucSubConnectorType;     //CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A
4377   UCHAR                       ucReserved;
4378 }ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD;
4379 
4380 
4381 typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD
4382 {
4383 	ATOM_COMMON_RECORD_HEADER   sheader;
4384 	UCHAR												ucMuxType;							//decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state
4385 	UCHAR												ucMuxControlPin;
4386 	UCHAR												ucMuxState[2];					//for alligment purpose
4387 }ATOM_ROUTER_DDC_PATH_SELECT_RECORD;
4388 
4389 typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD
4390 {
4391 	ATOM_COMMON_RECORD_HEADER   sheader;
4392 	UCHAR												ucMuxType;
4393 	UCHAR												ucMuxControlPin;
4394 	UCHAR												ucMuxState[2];					//for alligment purpose
4395 }ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD;
4396 
4397 // define ucMuxType
4398 #define ATOM_ROUTER_MUX_PIN_STATE_MASK								0x0f
4399 #define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT		0x01
4400 
4401 typedef struct _ATOM_CONNECTOR_HPDPIN_LUT_RECORD     //record for ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE
4402 {
4403   ATOM_COMMON_RECORD_HEADER   sheader;
4404   UCHAR                       ucHPDPINMap[MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES];  //An fixed size array which maps external pins to internal GPIO_PIN_INFO table
4405 }ATOM_CONNECTOR_HPDPIN_LUT_RECORD;
4406 
4407 typedef struct _ATOM_CONNECTOR_AUXDDC_LUT_RECORD  //record for ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE
4408 {
4409   ATOM_COMMON_RECORD_HEADER   sheader;
4410   ATOM_I2C_ID_CONFIG          ucAUXDDCMap[MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES];  //An fixed size array which maps external pins to internal DDC ID
4411 }ATOM_CONNECTOR_AUXDDC_LUT_RECORD;
4412 
4413 typedef struct _ATOM_OBJECT_LINK_RECORD
4414 {
4415   ATOM_COMMON_RECORD_HEADER   sheader;
4416   USHORT                      usObjectID;         //could be connector, encorder or other object in object.h
4417 }ATOM_OBJECT_LINK_RECORD;
4418 
4419 typedef struct _ATOM_CONNECTOR_REMOTE_CAP_RECORD
4420 {
4421   ATOM_COMMON_RECORD_HEADER   sheader;
4422   USHORT                      usReserved;
4423 }ATOM_CONNECTOR_REMOTE_CAP_RECORD;
4424 
4425 typedef struct  _ATOM_CONNECTOR_LAYOUT_INFO
4426 {
4427    USHORT usConnectorObjectId;
4428    UCHAR  ucConnectorType;
4429    UCHAR  ucPosition;
4430 }ATOM_CONNECTOR_LAYOUT_INFO;
4431 
4432 // define ATOM_CONNECTOR_LAYOUT_INFO.ucConnectorType to describe the display connector size
4433 #define CONNECTOR_TYPE_DVI_D                 1
4434 #define CONNECTOR_TYPE_DVI_I                 2
4435 #define CONNECTOR_TYPE_VGA                   3
4436 #define CONNECTOR_TYPE_HDMI                  4
4437 #define CONNECTOR_TYPE_DISPLAY_PORT          5
4438 #define CONNECTOR_TYPE_MINI_DISPLAY_PORT     6
4439 
4440 typedef struct  _ATOM_BRACKET_LAYOUT_RECORD
4441 {
4442   ATOM_COMMON_RECORD_HEADER   sheader;
4443   UCHAR                       ucLength;
4444   UCHAR                       ucWidth;
4445   UCHAR                       ucConnNum;
4446   UCHAR                       ucReserved;
4447   ATOM_CONNECTOR_LAYOUT_INFO  asConnInfo[1];
4448 }ATOM_BRACKET_LAYOUT_RECORD;
4449 
4450 /****************************************************************************/
4451 // ASIC voltage data table
4452 /****************************************************************************/
4453 typedef struct  _ATOM_VOLTAGE_INFO_HEADER
4454 {
4455    USHORT   usVDDCBaseLevel;                //In number of 50mv unit
4456    USHORT   usReserved;                     //For possible extension table offset
4457    UCHAR    ucNumOfVoltageEntries;
4458    UCHAR    ucBytesPerVoltageEntry;
4459    UCHAR    ucVoltageStep;                  //Indicating in how many mv increament is one step, 0.5mv unit
4460    UCHAR    ucDefaultVoltageEntry;
4461    UCHAR    ucVoltageControlI2cLine;
4462    UCHAR    ucVoltageControlAddress;
4463    UCHAR    ucVoltageControlOffset;
4464 }ATOM_VOLTAGE_INFO_HEADER;
4465 
4466 typedef struct  _ATOM_VOLTAGE_INFO
4467 {
4468    ATOM_COMMON_TABLE_HEADER	sHeader;
4469    ATOM_VOLTAGE_INFO_HEADER viHeader;
4470    UCHAR    ucVoltageEntries[64];            //64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry
4471 }ATOM_VOLTAGE_INFO;
4472 
4473 
4474 typedef struct  _ATOM_VOLTAGE_FORMULA
4475 {
4476    USHORT   usVoltageBaseLevel;             // In number of 1mv unit
4477    USHORT   usVoltageStep;                  // Indicating in how many mv increament is one step, 1mv unit
4478 	 UCHAR		ucNumOfVoltageEntries;					// Number of Voltage Entry, which indicate max Voltage
4479 	 UCHAR		ucFlag;													// bit0=0 :step is 1mv =1 0.5mv
4480 	 UCHAR		ucBaseVID;											// if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep
4481 	 UCHAR		ucReserved;
4482 	 UCHAR		ucVIDAdjustEntries[32];					// 32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries
4483 }ATOM_VOLTAGE_FORMULA;
4484 
4485 typedef struct  _VOLTAGE_LUT_ENTRY
4486 {
4487 	 USHORT		usVoltageCode;									// The Voltage ID, either GPIO or I2C code
4488 	 USHORT		usVoltageValue;									// The corresponding Voltage Value, in mV
4489 }VOLTAGE_LUT_ENTRY;
4490 
4491 typedef struct  _ATOM_VOLTAGE_FORMULA_V2
4492 {
4493 	 UCHAR		ucNumOfVoltageEntries;					// Number of Voltage Entry, which indicate max Voltage
4494 	 UCHAR		ucReserved[3];
4495 	 VOLTAGE_LUT_ENTRY asVIDAdjustEntries[32];// 32 is for allocation, the actual number of entries is in ucNumOfVoltageEntries
4496 }ATOM_VOLTAGE_FORMULA_V2;
4497 
4498 typedef struct _ATOM_VOLTAGE_CONTROL
4499 {
4500 	UCHAR		 ucVoltageControlId;							//Indicate it is controlled by I2C or GPIO or HW state machine
4501   UCHAR    ucVoltageControlI2cLine;
4502   UCHAR    ucVoltageControlAddress;
4503   UCHAR    ucVoltageControlOffset;
4504   USHORT   usGpioPin_AIndex;								//GPIO_PAD register index
4505   UCHAR    ucGpioPinBitShift[9];						//at most 8 pin support 255 VIDs, termintate with 0xff
4506 	UCHAR		 ucReserved;
4507 }ATOM_VOLTAGE_CONTROL;
4508 
4509 // Define ucVoltageControlId
4510 #define	VOLTAGE_CONTROLLED_BY_HW							0x00
4511 #define	VOLTAGE_CONTROLLED_BY_I2C_MASK				0x7F
4512 #define	VOLTAGE_CONTROLLED_BY_GPIO						0x80
4513 #define	VOLTAGE_CONTROL_ID_LM64								0x01									//I2C control, used for R5xx Core Voltage
4514 #define	VOLTAGE_CONTROL_ID_DAC								0x02									//I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI
4515 #define	VOLTAGE_CONTROL_ID_VT116xM						0x03									//I2C control, used for R6xx Core Voltage
4516 #define VOLTAGE_CONTROL_ID_DS4402							0x04
4517 #define VOLTAGE_CONTROL_ID_UP6266 						0x05
4518 #define VOLTAGE_CONTROL_ID_SCORPIO						0x06
4519 #define	VOLTAGE_CONTROL_ID_VT1556M						0x07
4520 #define	VOLTAGE_CONTROL_ID_CHL822x						0x08
4521 #define	VOLTAGE_CONTROL_ID_VT1586M						0x09
4522 #define VOLTAGE_CONTROL_ID_UP1637 						0x0A
4523 #define	VOLTAGE_CONTROL_ID_CHL8214            0x0B
4524 #define	VOLTAGE_CONTROL_ID_UP1801             0x0C
4525 #define	VOLTAGE_CONTROL_ID_ST6788A            0x0D
4526 #define VOLTAGE_CONTROL_ID_CHLIR3564SVI2      0x0E
4527 #define VOLTAGE_CONTROL_ID_AD527x      	      0x0F
4528 #define VOLTAGE_CONTROL_ID_NCP81022    	      0x10
4529 #define VOLTAGE_CONTROL_ID_LTC2635			  0x11
4530 
4531 typedef struct  _ATOM_VOLTAGE_OBJECT
4532 {
4533  	 UCHAR		ucVoltageType;									//Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
4534 	 UCHAR		ucSize;													//Size of Object
4535 	 ATOM_VOLTAGE_CONTROL			asControl;			//describ how to control
4536  	 ATOM_VOLTAGE_FORMULA			asFormula;			//Indicate How to convert real Voltage to VID
4537 }ATOM_VOLTAGE_OBJECT;
4538 
4539 typedef struct  _ATOM_VOLTAGE_OBJECT_V2
4540 {
4541  	 UCHAR		ucVoltageType;									//Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
4542 	 UCHAR		ucSize;													//Size of Object
4543 	 ATOM_VOLTAGE_CONTROL			asControl;			//describ how to control
4544  	 ATOM_VOLTAGE_FORMULA_V2	asFormula;			//Indicate How to convert real Voltage to VID
4545 }ATOM_VOLTAGE_OBJECT_V2;
4546 
4547 typedef struct  _ATOM_VOLTAGE_OBJECT_INFO
4548 {
4549    ATOM_COMMON_TABLE_HEADER	sHeader;
4550 	 ATOM_VOLTAGE_OBJECT			asVoltageObj[3];	//Info for Voltage control
4551 }ATOM_VOLTAGE_OBJECT_INFO;
4552 
4553 typedef struct  _ATOM_VOLTAGE_OBJECT_INFO_V2
4554 {
4555    ATOM_COMMON_TABLE_HEADER	sHeader;
4556 	 ATOM_VOLTAGE_OBJECT_V2			asVoltageObj[3];	//Info for Voltage control
4557 }ATOM_VOLTAGE_OBJECT_INFO_V2;
4558 
4559 typedef struct  _ATOM_LEAKID_VOLTAGE
4560 {
4561 	UCHAR		ucLeakageId;
4562 	UCHAR		ucReserved;
4563 	USHORT	usVoltage;
4564 }ATOM_LEAKID_VOLTAGE;
4565 
4566 typedef struct _ATOM_VOLTAGE_OBJECT_HEADER_V3{
4567  	 UCHAR		ucVoltageType;									//Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
4568    UCHAR		ucVoltageMode;							    //Indicate voltage control mode: Init/Set/Leakage/Set phase
4569 	 USHORT		usSize;													//Size of Object
4570 }ATOM_VOLTAGE_OBJECT_HEADER_V3;
4571 
4572 // ATOM_VOLTAGE_OBJECT_HEADER_V3.ucVoltageMode
4573 #define VOLTAGE_OBJ_GPIO_LUT                 0        //VOLTAGE and GPIO Lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3
4574 #define VOLTAGE_OBJ_VR_I2C_INIT_SEQ          3        //VOLTAGE REGULATOR INIT sequece through I2C -> ATOM_I2C_VOLTAGE_OBJECT_V3
4575 #define VOLTAGE_OBJ_PHASE_LUT                4        //Set Vregulator Phase lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3
4576 #define VOLTAGE_OBJ_SVID2                    7        //Indicate voltage control by SVID2 ->ATOM_SVID2_VOLTAGE_OBJECT_V3
4577 #define VOLTAGE_OBJ_EVV                      8
4578 #define VOLTAGE_OBJ_PWRBOOST_LEAKAGE_LUT     0x10     //Powerboost Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
4579 #define VOLTAGE_OBJ_HIGH_STATE_LEAKAGE_LUT   0x11     //High voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
4580 #define VOLTAGE_OBJ_HIGH1_STATE_LEAKAGE_LUT  0x12     //High1 voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
4581 
4582 typedef struct  _VOLTAGE_LUT_ENTRY_V2
4583 {
4584 	 ULONG		ulVoltageId;									  // The Voltage ID which is used to program GPIO register
4585 	 USHORT		usVoltageValue;									// The corresponding Voltage Value, in mV
4586 }VOLTAGE_LUT_ENTRY_V2;
4587 
4588 typedef struct  _LEAKAGE_VOLTAGE_LUT_ENTRY_V2
4589 {
4590   USHORT	usVoltageLevel; 							  // The Voltage ID which is used to program GPIO register
4591   USHORT  usVoltageId;
4592 	USHORT	usLeakageId;									  // The corresponding Voltage Value, in mV
4593 }LEAKAGE_VOLTAGE_LUT_ENTRY_V2;
4594 
4595 typedef struct  _ATOM_I2C_VOLTAGE_OBJECT_V3
4596 {
4597    ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;    // voltage mode = VOLTAGE_OBJ_VR_I2C_INIT_SEQ
4598    UCHAR	ucVoltageRegulatorId;					  //Indicate Voltage Regulator Id
4599    UCHAR    ucVoltageControlI2cLine;
4600    UCHAR    ucVoltageControlAddress;
4601    UCHAR    ucVoltageControlOffset;
4602    ULONG    ulReserved;
4603    VOLTAGE_LUT_ENTRY asVolI2cLut[1];        // end with 0xff
4604 }ATOM_I2C_VOLTAGE_OBJECT_V3;
4605 
4606 // ATOM_I2C_VOLTAGE_OBJECT_V3.ucVoltageControlFlag
4607 #define VOLTAGE_DATA_ONE_BYTE                0
4608 #define VOLTAGE_DATA_TWO_BYTE                1
4609 
4610 typedef struct  _ATOM_GPIO_VOLTAGE_OBJECT_V3
4611 {
4612    ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;   // voltage mode = VOLTAGE_OBJ_GPIO_LUT or VOLTAGE_OBJ_PHASE_LUT
4613    UCHAR    ucVoltageGpioCntlId;         // default is 0 which indicate control through CG VID mode
4614    UCHAR    ucGpioEntryNum;              // indiate the entry numbers of Votlage/Gpio value Look up table
4615    UCHAR    ucPhaseDelay;                // phase delay in unit of micro second
4616    UCHAR    ucReserved;
4617    ULONG    ulGpioMaskVal;               // GPIO Mask value
4618    VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[];
4619 }ATOM_GPIO_VOLTAGE_OBJECT_V3;
4620 
4621 typedef struct  _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
4622 {
4623    ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;    // voltage mode = 0x10/0x11/0x12
4624    UCHAR    ucLeakageCntlId;             // default is 0
4625    UCHAR    ucLeakageEntryNum;           // indicate the entry number of LeakageId/Voltage Lut table
4626    UCHAR    ucReserved[2];
4627    ULONG    ulMaxVoltageLevel;
4628    LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1];
4629 }ATOM_LEAKAGE_VOLTAGE_OBJECT_V3;
4630 
4631 
4632 typedef struct  _ATOM_SVID2_VOLTAGE_OBJECT_V3
4633 {
4634    ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;    // voltage mode = VOLTAGE_OBJ_SVID2
4635 // 14:7 – PSI0_VID
4636 // 6 – PSI0_EN
4637 // 5 – PSI1
4638 // 4:2 – load line slope trim.
4639 // 1:0 – offset trim,
4640    USHORT   usLoadLine_PSI;
4641 // GPU GPIO pin Id to SVID2 regulator VRHot pin. possible value 0~31. 0 means GPIO0, 31 means GPIO31
4642    UCHAR    ucSVDGpioId;     //0~31 indicate GPIO0~31
4643    UCHAR    ucSVCGpioId;     //0~31 indicate GPIO0~31
4644    ULONG    ulReserved;
4645 }ATOM_SVID2_VOLTAGE_OBJECT_V3;
4646 
4647 typedef union _ATOM_VOLTAGE_OBJECT_V3{
4648   ATOM_GPIO_VOLTAGE_OBJECT_V3 asGpioVoltageObj;
4649   ATOM_I2C_VOLTAGE_OBJECT_V3 asI2cVoltageObj;
4650   ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 asLeakageObj;
4651   ATOM_SVID2_VOLTAGE_OBJECT_V3 asSVID2Obj;
4652 }ATOM_VOLTAGE_OBJECT_V3;
4653 
4654 typedef struct  _ATOM_VOLTAGE_OBJECT_INFO_V3_1
4655 {
4656    ATOM_COMMON_TABLE_HEADER	sHeader;
4657 	 ATOM_VOLTAGE_OBJECT_V3			asVoltageObj[3];	//Info for Voltage control
4658 }ATOM_VOLTAGE_OBJECT_INFO_V3_1;
4659 
4660 typedef struct  _ATOM_ASIC_PROFILE_VOLTAGE
4661 {
4662 	UCHAR		ucProfileId;
4663 	UCHAR		ucReserved;
4664 	USHORT	usSize;
4665 	USHORT	usEfuseSpareStartAddr;
4666 	USHORT	usFuseIndex[8];												//from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id,
4667 	ATOM_LEAKID_VOLTAGE					asLeakVol[2];			//Leakid and relatd voltage
4668 }ATOM_ASIC_PROFILE_VOLTAGE;
4669 
4670 //ucProfileId
4671 #define	ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE			1
4672 #define	ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE			1
4673 #define	ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE					2
4674 
4675 typedef struct  _ATOM_ASIC_PROFILING_INFO
4676 {
4677   ATOM_COMMON_TABLE_HEADER			asHeader;
4678 	ATOM_ASIC_PROFILE_VOLTAGE			asVoltage;
4679 }ATOM_ASIC_PROFILING_INFO;
4680 
4681 typedef struct  _ATOM_ASIC_PROFILING_INFO_V2_1
4682 {
4683   ATOM_COMMON_TABLE_HEADER			asHeader;
4684   UCHAR  ucLeakageBinNum;                // indicate the entry number of LeakageId/Voltage Lut table
4685   USHORT usLeakageBinArrayOffset;        // offset of USHORT Leakage Bin list array ( from lower LeakageId to higher)
4686 
4687   UCHAR  ucElbVDDC_Num;
4688   USHORT usElbVDDC_IdArrayOffset;        // offset of USHORT virtual VDDC voltage id ( 0xff01~0xff08 )
4689   USHORT usElbVDDC_LevelArrayOffset;     // offset of 2 dimension voltage level USHORT array
4690 
4691   UCHAR  ucElbVDDCI_Num;
4692   USHORT usElbVDDCI_IdArrayOffset;       // offset of USHORT virtual VDDCI voltage id ( 0xff01~0xff08 )
4693   USHORT usElbVDDCI_LevelArrayOffset;    // offset of 2 dimension voltage level USHORT array
4694 }ATOM_ASIC_PROFILING_INFO_V2_1;
4695 
4696 typedef struct  _ATOM_ASIC_PROFILING_INFO_V3_1
4697 {
4698   ATOM_COMMON_TABLE_HEADER         asHeader;
4699   ULONG  ulEvvDerateTdp;
4700   ULONG  ulEvvDerateTdc;
4701   ULONG  ulBoardCoreTemp;
4702   ULONG  ulMaxVddc;
4703   ULONG  ulMinVddc;
4704   ULONG  ulLoadLineSlop;
4705   ULONG  ulLeakageTemp;
4706   ULONG  ulLeakageVoltage;
4707   ULONG  ulCACmEncodeRange;
4708   ULONG  ulCACmEncodeAverage;
4709   ULONG  ulCACbEncodeRange;
4710   ULONG  ulCACbEncodeAverage;
4711   ULONG  ulKt_bEncodeRange;
4712   ULONG  ulKt_bEncodeAverage;
4713   ULONG  ulKv_mEncodeRange;
4714   ULONG  ulKv_mEncodeAverage;
4715   ULONG  ulKv_bEncodeRange;
4716   ULONG  ulKv_bEncodeAverage;
4717   ULONG  ulLkgEncodeLn_MaxDivMin;
4718   ULONG  ulLkgEncodeMin;
4719   ULONG  ulEfuseLogisticAlpha;
4720   USHORT usPowerDpm0;
4721   USHORT usCurrentDpm0;
4722   USHORT usPowerDpm1;
4723   USHORT usCurrentDpm1;
4724   USHORT usPowerDpm2;
4725   USHORT usCurrentDpm2;
4726   USHORT usPowerDpm3;
4727   USHORT usCurrentDpm3;
4728   USHORT usPowerDpm4;
4729   USHORT usCurrentDpm4;
4730   USHORT usPowerDpm5;
4731   USHORT usCurrentDpm5;
4732   USHORT usPowerDpm6;
4733   USHORT usCurrentDpm6;
4734   USHORT usPowerDpm7;
4735   USHORT usCurrentDpm7;
4736 }ATOM_ASIC_PROFILING_INFO_V3_1;
4737 
4738 
4739 typedef struct _ATOM_POWER_SOURCE_OBJECT
4740 {
4741 	UCHAR	ucPwrSrcId;													// Power source
4742 	UCHAR	ucPwrSensorType;										// GPIO, I2C or none
4743 	UCHAR	ucPwrSensId;											  // if GPIO detect, it is GPIO id,  if I2C detect, it is I2C id
4744 	UCHAR	ucPwrSensSlaveAddr;									// Slave address if I2C detect
4745 	UCHAR ucPwrSensRegIndex;									// I2C register Index if I2C detect
4746 	UCHAR ucPwrSensRegBitMask;								// detect which bit is used if I2C detect
4747 	UCHAR	ucPwrSensActiveState;								// high active or low active
4748 	UCHAR	ucReserve[3];												// reserve
4749 	USHORT usSensPwr;													// in unit of watt
4750 }ATOM_POWER_SOURCE_OBJECT;
4751 
4752 typedef struct _ATOM_POWER_SOURCE_INFO
4753 {
4754 		ATOM_COMMON_TABLE_HEADER		asHeader;
4755 		UCHAR												asPwrbehave[16];
4756 		ATOM_POWER_SOURCE_OBJECT		asPwrObj[1];
4757 }ATOM_POWER_SOURCE_INFO;
4758 
4759 
4760 //Define ucPwrSrcId
4761 #define POWERSOURCE_PCIE_ID1						0x00
4762 #define POWERSOURCE_6PIN_CONNECTOR_ID1	0x01
4763 #define POWERSOURCE_8PIN_CONNECTOR_ID1	0x02
4764 #define POWERSOURCE_6PIN_CONNECTOR_ID2	0x04
4765 #define POWERSOURCE_8PIN_CONNECTOR_ID2	0x08
4766 
4767 //define ucPwrSensorId
4768 #define POWER_SENSOR_ALWAYS							0x00
4769 #define POWER_SENSOR_GPIO								0x01
4770 #define POWER_SENSOR_I2C								0x02
4771 
4772 typedef struct _ATOM_CLK_VOLT_CAPABILITY
4773 {
4774   ULONG      ulVoltageIndex;                      // The Voltage Index indicated by FUSE, same voltage index shared with SCLK DPM fuse table
4775   ULONG      ulMaximumSupportedCLK;               // Maximum clock supported with specified voltage index, unit in 10kHz
4776 }ATOM_CLK_VOLT_CAPABILITY;
4777 
4778 typedef struct _ATOM_AVAILABLE_SCLK_LIST
4779 {
4780   ULONG      ulSupportedSCLK;               // Maximum clock supported with specified voltage index,  unit in 10kHz
4781   USHORT     usVoltageIndex;                // The Voltage Index indicated by FUSE for specified SCLK
4782   USHORT     usVoltageID;                   // The Voltage ID indicated by FUSE for specified SCLK
4783 }ATOM_AVAILABLE_SCLK_LIST;
4784 
4785 // ATOM_INTEGRATED_SYSTEM_INFO_V6 ulSystemConfig cap definition
4786 #define ATOM_IGP_INFO_V6_SYSTEM_CONFIG__PCIE_POWER_GATING_ENABLE             1       // refer to ulSystemConfig bit[0]
4787 
4788 // this IntegrateSystemInfoTable is used for Liano/Ontario APU
4789 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6
4790 {
4791   ATOM_COMMON_TABLE_HEADER   sHeader;
4792   ULONG  ulBootUpEngineClock;
4793   ULONG  ulDentistVCOFreq;
4794   ULONG  ulBootUpUMAClock;
4795   ATOM_CLK_VOLT_CAPABILITY   sDISPCLK_Voltage[4];
4796   ULONG  ulBootUpReqDisplayVector;
4797   ULONG  ulOtherDisplayMisc;
4798   ULONG  ulGPUCapInfo;
4799   ULONG  ulSB_MMIO_Base_Addr;
4800   USHORT usRequestedPWMFreqInHz;
4801   UCHAR  ucHtcTmpLmt;
4802   UCHAR  ucHtcHystLmt;
4803   ULONG  ulMinEngineClock;
4804   ULONG  ulSystemConfig;
4805   ULONG  ulCPUCapInfo;
4806   USHORT usNBP0Voltage;
4807   USHORT usNBP1Voltage;
4808   USHORT usBootUpNBVoltage;
4809   USHORT usExtDispConnInfoOffset;
4810   USHORT usPanelRefreshRateRange;
4811   UCHAR  ucMemoryType;
4812   UCHAR  ucUMAChannelNumber;
4813   ULONG  ulCSR_M3_ARB_CNTL_DEFAULT[10];
4814   ULONG  ulCSR_M3_ARB_CNTL_UVD[10];
4815   ULONG  ulCSR_M3_ARB_CNTL_FS3D[10];
4816   ATOM_AVAILABLE_SCLK_LIST   sAvail_SCLK[5];
4817   ULONG  ulGMCRestoreResetTime;
4818   ULONG  ulMinimumNClk;
4819   ULONG  ulIdleNClk;
4820   ULONG  ulDDR_DLL_PowerUpTime;
4821   ULONG  ulDDR_PLL_PowerUpTime;
4822   USHORT usPCIEClkSSPercentage;
4823   USHORT usPCIEClkSSType;
4824   USHORT usLvdsSSPercentage;
4825   USHORT usLvdsSSpreadRateIn10Hz;
4826   USHORT usHDMISSPercentage;
4827   USHORT usHDMISSpreadRateIn10Hz;
4828   USHORT usDVISSPercentage;
4829   USHORT usDVISSpreadRateIn10Hz;
4830   ULONG  SclkDpmBoostMargin;
4831   ULONG  SclkDpmThrottleMargin;
4832   USHORT SclkDpmTdpLimitPG;
4833   USHORT SclkDpmTdpLimitBoost;
4834   ULONG  ulBoostEngineCLock;
4835   UCHAR  ulBoostVid_2bit;
4836   UCHAR  EnableBoost;
4837   USHORT GnbTdpLimit;
4838   USHORT usMaxLVDSPclkFreqInSingleLink;
4839   UCHAR  ucLvdsMisc;
4840   UCHAR  ucLVDSReserved;
4841   ULONG  ulReserved3[15];
4842   ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
4843 }ATOM_INTEGRATED_SYSTEM_INFO_V6;
4844 
4845 // ulGPUCapInfo
4846 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE       0x01
4847 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION          0x08
4848 
4849 //ucLVDSMisc:
4850 #define SYS_INFO_LVDSMISC__888_FPDI_MODE                                             0x01
4851 #define SYS_INFO_LVDSMISC__DL_CH_SWAP                                                0x02
4852 #define SYS_INFO_LVDSMISC__888_BPC                                                   0x04
4853 #define SYS_INFO_LVDSMISC__OVERRIDE_EN                                               0x08
4854 #define SYS_INFO_LVDSMISC__BLON_ACTIVE_LOW                                           0x10
4855 // new since Trinity
4856 #define SYS_INFO_LVDSMISC__TRAVIS_LVDS_VOL_OVERRIDE_EN                               0x20
4857 
4858 // not used any more
4859 #define SYS_INFO_LVDSMISC__VSYNC_ACTIVE_LOW                                          0x04
4860 #define SYS_INFO_LVDSMISC__HSYNC_ACTIVE_LOW                                          0x08
4861 
4862 /**********************************************************************************************************************
4863   ATOM_INTEGRATED_SYSTEM_INFO_V6 Description
4864 ulBootUpEngineClock:              VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
4865 ulDentistVCOFreq:                 Dentist VCO clock in 10kHz unit.
4866 ulBootUpUMAClock:                 System memory boot up clock frequency in 10Khz unit.
4867 sDISPCLK_Voltage:                 Report Display clock voltage requirement.
4868 
4869 ulBootUpReqDisplayVector:         VBIOS boot up display IDs, following are supported devices in Liano/Ontaio projects:
4870                                   ATOM_DEVICE_CRT1_SUPPORT                  0x0001
4871                                   ATOM_DEVICE_CRT2_SUPPORT                  0x0010
4872                                   ATOM_DEVICE_DFP1_SUPPORT                  0x0008
4873                                   ATOM_DEVICE_DFP6_SUPPORT                  0x0040
4874                                   ATOM_DEVICE_DFP2_SUPPORT                  0x0080
4875                                   ATOM_DEVICE_DFP3_SUPPORT                  0x0200
4876                                   ATOM_DEVICE_DFP4_SUPPORT                  0x0400
4877                                   ATOM_DEVICE_DFP5_SUPPORT                  0x0800
4878                                   ATOM_DEVICE_LCD1_SUPPORT                  0x0002
4879 ulOtherDisplayMisc:      	        Other display related flags, not defined yet.
4880 ulGPUCapInfo:                     bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode.
4881                                         =1: TMDS/HDMI Coherent Mode use signel PLL mode.
4882                                   bit[3]=0: Enable HW AUX mode detection logic
4883                                         =1: Disable HW AUX mode dettion logic
4884 ulSB_MMIO_Base_Addr:              Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage.
4885 
4886 usRequestedPWMFreqInHz:           When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
4887                                   Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
4888 
4889                                   When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
4890                                   1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
4891                                   VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
4892                                   Changing BL using VBIOS function is functional in both driver and non-driver present environment;
4893                                   and enabling VariBri under the driver environment from PP table is optional.
4894 
4895                                   2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
4896                                   that BL control from GPU is expected.
4897                                   VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
4898                                   Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
4899                                   it's per platform
4900                                   and enabling VariBri under the driver environment from PP table is optional.
4901 
4902 ucHtcTmpLmt:                      Refer to D18F3x64 bit[22:16], HtcTmpLmt.
4903                                   Threshold on value to enter HTC_active state.
4904 ucHtcHystLmt:                     Refer to D18F3x64 bit[27:24], HtcHystLmt.
4905                                   To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
4906 ulMinEngineClock:                 Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings.
4907 ulSystemConfig:                   Bit[0]=0: PCIE Power Gating Disabled
4908                                         =1: PCIE Power Gating Enabled
4909                                   Bit[1]=0: DDR-DLL shut-down feature disabled.
4910                                          1: DDR-DLL shut-down feature enabled.
4911                                   Bit[2]=0: DDR-PLL Power down feature disabled.
4912                                          1: DDR-PLL Power down feature enabled.
4913 ulCPUCapInfo:                     TBD
4914 usNBP0Voltage:                    VID for voltage on NB P0 State
4915 usNBP1Voltage:                    VID for voltage on NB P1 State
4916 usBootUpNBVoltage:                Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement.
4917 usExtDispConnInfoOffset:          Offset to sExtDispConnInfo inside the structure
4918 usPanelRefreshRateRange:          Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
4919                                   to indicate a range.
4920                                   SUPPORTED_LCD_REFRESHRATE_30Hz          0x0004
4921                                   SUPPORTED_LCD_REFRESHRATE_40Hz          0x0008
4922                                   SUPPORTED_LCD_REFRESHRATE_50Hz          0x0010
4923                                   SUPPORTED_LCD_REFRESHRATE_60Hz          0x0020
4924 ucMemoryType:                     [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved.
4925 ucUMAChannelNumber:      	        System memory channel numbers.
4926 ulCSR_M3_ARB_CNTL_DEFAULT[10]:    Arrays with values for CSR M3 arbiter for default
4927 ulCSR_M3_ARB_CNTL_UVD[10]:        Arrays with values for CSR M3 arbiter for UVD playback.
4928 ulCSR_M3_ARB_CNTL_FS3D[10]:       Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
4929 sAvail_SCLK[5]:                   Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
4930 ulGMCRestoreResetTime:            GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
4931 ulMinimumNClk:                    Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz.
4932 ulIdleNClk:                       NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
4933 ulDDR_DLL_PowerUpTime:            DDR PHY DLL power up time. Unit in ns.
4934 ulDDR_PLL_PowerUpTime:            DDR PHY PLL power up time. Unit in ns.
4935 usPCIEClkSSPercentage:            PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%.
4936 usPCIEClkSSType:                  PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread.
4937 usLvdsSSPercentage:               LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
4938 usLvdsSSpreadRateIn10Hz:          LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
4939 usHDMISSPercentage:               HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting.
4940 usHDMISSpreadRateIn10Hz:          HDMI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting.
4941 usDVISSPercentage:                DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting.
4942 usDVISSpreadRateIn10Hz:           DVI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting.
4943 usMaxLVDSPclkFreqInSingleLink:    Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
4944 ucLVDSMisc:                       [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
4945                                   [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
4946                                   [bit2] LVDS 888bit per color mode  =0: 666 bit per color =1:888 bit per color
4947                                   [bit3] LVDS parameter override enable  =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
4948                                   [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
4949 **********************************************************************************************************************/
4950 
4951 // this Table is used for Liano/Ontario APU
4952 typedef struct _ATOM_FUSION_SYSTEM_INFO_V1
4953 {
4954   ATOM_INTEGRATED_SYSTEM_INFO_V6    sIntegratedSysInfo;
4955   ULONG  ulPowerplayTable[128];
4956 }ATOM_FUSION_SYSTEM_INFO_V1;
4957 
4958 
4959 typedef struct _ATOM_TDP_CONFIG_BITS
4960 {
4961 #if ATOM_BIG_ENDIAN
4962   ULONG   uReserved:2;
4963   ULONG   uTDP_Value:14;  // Original TDP value in tens of milli watts
4964   ULONG   uCTDP_Value:14; // Override value in tens of milli watts
4965   ULONG   uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value))
4966 #else
4967   ULONG   uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value))
4968   ULONG   uCTDP_Value:14; // Override value in tens of milli watts
4969   ULONG   uTDP_Value:14;  // Original TDP value in tens of milli watts
4970   ULONG   uReserved:2;
4971 #endif
4972 }ATOM_TDP_CONFIG_BITS;
4973 
4974 typedef union _ATOM_TDP_CONFIG
4975 {
4976   ATOM_TDP_CONFIG_BITS TDP_config;
4977   ULONG            TDP_config_all;
4978 }ATOM_TDP_CONFIG;
4979 
4980 /**********************************************************************************************************************
4981   ATOM_FUSION_SYSTEM_INFO_V1 Description
4982 sIntegratedSysInfo:               refer to ATOM_INTEGRATED_SYSTEM_INFO_V6 definition.
4983 ulPowerplayTable[128]:            This 512 bytes memory is used to save ATOM_PPLIB_POWERPLAYTABLE3, starting form ulPowerplayTable[0]
4984 **********************************************************************************************************************/
4985 
4986 // this IntegrateSystemInfoTable is used for Trinity APU
4987 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7
4988 {
4989   ATOM_COMMON_TABLE_HEADER   sHeader;
4990   ULONG  ulBootUpEngineClock;
4991   ULONG  ulDentistVCOFreq;
4992   ULONG  ulBootUpUMAClock;
4993   ATOM_CLK_VOLT_CAPABILITY   sDISPCLK_Voltage[4];
4994   ULONG  ulBootUpReqDisplayVector;
4995   ULONG  ulOtherDisplayMisc;
4996   ULONG  ulGPUCapInfo;
4997   ULONG  ulSB_MMIO_Base_Addr;
4998   USHORT usRequestedPWMFreqInHz;
4999   UCHAR  ucHtcTmpLmt;
5000   UCHAR  ucHtcHystLmt;
5001   ULONG  ulMinEngineClock;
5002   ULONG  ulSystemConfig;
5003   ULONG  ulCPUCapInfo;
5004   USHORT usNBP0Voltage;
5005   USHORT usNBP1Voltage;
5006   USHORT usBootUpNBVoltage;
5007   USHORT usExtDispConnInfoOffset;
5008   USHORT usPanelRefreshRateRange;
5009   UCHAR  ucMemoryType;
5010   UCHAR  ucUMAChannelNumber;
5011   UCHAR  strVBIOSMsg[40];
5012   ATOM_TDP_CONFIG  asTdpConfig;
5013   ULONG  ulReserved[19];
5014   ATOM_AVAILABLE_SCLK_LIST   sAvail_SCLK[5];
5015   ULONG  ulGMCRestoreResetTime;
5016   ULONG  ulMinimumNClk;
5017   ULONG  ulIdleNClk;
5018   ULONG  ulDDR_DLL_PowerUpTime;
5019   ULONG  ulDDR_PLL_PowerUpTime;
5020   USHORT usPCIEClkSSPercentage;
5021   USHORT usPCIEClkSSType;
5022   USHORT usLvdsSSPercentage;
5023   USHORT usLvdsSSpreadRateIn10Hz;
5024   USHORT usHDMISSPercentage;
5025   USHORT usHDMISSpreadRateIn10Hz;
5026   USHORT usDVISSPercentage;
5027   USHORT usDVISSpreadRateIn10Hz;
5028   ULONG  SclkDpmBoostMargin;
5029   ULONG  SclkDpmThrottleMargin;
5030   USHORT SclkDpmTdpLimitPG;
5031   USHORT SclkDpmTdpLimitBoost;
5032   ULONG  ulBoostEngineCLock;
5033   UCHAR  ulBoostVid_2bit;
5034   UCHAR  EnableBoost;
5035   USHORT GnbTdpLimit;
5036   USHORT usMaxLVDSPclkFreqInSingleLink;
5037   UCHAR  ucLvdsMisc;
5038   UCHAR  ucTravisLVDSVolAdjust;
5039   UCHAR  ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
5040   UCHAR  ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
5041   UCHAR  ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
5042   UCHAR  ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
5043   UCHAR  ucLVDSOffToOnDelay_in4Ms;
5044   UCHAR  ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
5045   UCHAR  ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
5046   UCHAR  ucMinAllowedBL_Level;
5047   ULONG  ulLCDBitDepthControlVal;
5048   ULONG  ulNbpStateMemclkFreq[4];
5049   USHORT usNBP2Voltage;
5050   USHORT usNBP3Voltage;
5051   ULONG  ulNbpStateNClkFreq[4];
5052   UCHAR  ucNBDPMEnable;
5053   UCHAR  ucReserved[3];
5054   UCHAR  ucDPMState0VclkFid;
5055   UCHAR  ucDPMState0DclkFid;
5056   UCHAR  ucDPMState1VclkFid;
5057   UCHAR  ucDPMState1DclkFid;
5058   UCHAR  ucDPMState2VclkFid;
5059   UCHAR  ucDPMState2DclkFid;
5060   UCHAR  ucDPMState3VclkFid;
5061   UCHAR  ucDPMState3DclkFid;
5062   ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
5063 }ATOM_INTEGRATED_SYSTEM_INFO_V1_7;
5064 
5065 // ulOtherDisplayMisc
5066 #define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT            0x01
5067 #define INTEGRATED_SYSTEM_INFO__GET_BOOTUP_DISPLAY_CALLBACK_FUNC_SUPPORT  0x02
5068 #define INTEGRATED_SYSTEM_INFO__GET_EXPANSION_CALLBACK_FUNC_SUPPORT       0x04
5069 #define INTEGRATED_SYSTEM_INFO__FAST_BOOT_SUPPORT                         0x08
5070 
5071 // ulGPUCapInfo
5072 #define SYS_INFO_GPUCAPS__TMDSHDMI_COHERENT_SINGLEPLL_MODE                0x01
5073 #define SYS_INFO_GPUCAPS__DP_SINGLEPLL_MODE                               0x02
5074 #define SYS_INFO_GPUCAPS__DISABLE_AUX_MODE_DETECT                         0x08
5075 #define SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS                               0x10
5076 
5077 /**********************************************************************************************************************
5078   ATOM_INTEGRATED_SYSTEM_INFO_V1_7 Description
5079 ulBootUpEngineClock:              VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
5080 ulDentistVCOFreq:                 Dentist VCO clock in 10kHz unit.
5081 ulBootUpUMAClock:                 System memory boot up clock frequency in 10Khz unit.
5082 sDISPCLK_Voltage:                 Report Display clock voltage requirement.
5083 
5084 ulBootUpReqDisplayVector:         VBIOS boot up display IDs, following are supported devices in Trinity projects:
5085                                   ATOM_DEVICE_CRT1_SUPPORT                  0x0001
5086                                   ATOM_DEVICE_DFP1_SUPPORT                  0x0008
5087                                   ATOM_DEVICE_DFP6_SUPPORT                  0x0040
5088                                   ATOM_DEVICE_DFP2_SUPPORT                  0x0080
5089                                   ATOM_DEVICE_DFP3_SUPPORT                  0x0200
5090                                   ATOM_DEVICE_DFP4_SUPPORT                  0x0400
5091                                   ATOM_DEVICE_DFP5_SUPPORT                  0x0800
5092                                   ATOM_DEVICE_LCD1_SUPPORT                  0x0002
5093 ulOtherDisplayMisc:      	        bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS.
5094                                         =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS.
5095                                   bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS
5096                                         =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS
5097                                   bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS
5098                                         =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS
5099                                   bit[3]=0: VBIOS fast boot is disable
5100                                         =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open)
5101 ulGPUCapInfo:                     bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode.
5102                                         =1: TMDS/HDMI Coherent Mode use signel PLL mode.
5103                                   bit[1]=0: DP mode use cascade PLL mode ( New for Trinity )
5104                                         =1: DP mode use single PLL mode
5105                                   bit[3]=0: Enable AUX HW mode detection logic
5106                                         =1: Disable AUX HW mode detection logic
5107 
5108 ulSB_MMIO_Base_Addr:              Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage.
5109 
5110 usRequestedPWMFreqInHz:           When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
5111                                   Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
5112 
5113                                   When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
5114                                   1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
5115                                   VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
5116                                   Changing BL using VBIOS function is functional in both driver and non-driver present environment;
5117                                   and enabling VariBri under the driver environment from PP table is optional.
5118 
5119                                   2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
5120                                   that BL control from GPU is expected.
5121                                   VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
5122                                   Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
5123                                   it's per platform
5124                                   and enabling VariBri under the driver environment from PP table is optional.
5125 
5126 ucHtcTmpLmt:                      Refer to D18F3x64 bit[22:16], HtcTmpLmt.
5127                                   Threshold on value to enter HTC_active state.
5128 ucHtcHystLmt:                     Refer to D18F3x64 bit[27:24], HtcHystLmt.
5129                                   To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
5130 ulMinEngineClock:                 Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings.
5131 ulSystemConfig:                   Bit[0]=0: PCIE Power Gating Disabled
5132                                         =1: PCIE Power Gating Enabled
5133                                   Bit[1]=0: DDR-DLL shut-down feature disabled.
5134                                          1: DDR-DLL shut-down feature enabled.
5135                                   Bit[2]=0: DDR-PLL Power down feature disabled.
5136                                          1: DDR-PLL Power down feature enabled.
5137 ulCPUCapInfo:                     TBD
5138 usNBP0Voltage:                    VID for voltage on NB P0 State
5139 usNBP1Voltage:                    VID for voltage on NB P1 State
5140 usNBP2Voltage:                    VID for voltage on NB P2 State
5141 usNBP3Voltage:                    VID for voltage on NB P3 State
5142 usBootUpNBVoltage:                Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement.
5143 usExtDispConnInfoOffset:          Offset to sExtDispConnInfo inside the structure
5144 usPanelRefreshRateRange:          Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
5145                                   to indicate a range.
5146                                   SUPPORTED_LCD_REFRESHRATE_30Hz          0x0004
5147                                   SUPPORTED_LCD_REFRESHRATE_40Hz          0x0008
5148                                   SUPPORTED_LCD_REFRESHRATE_50Hz          0x0010
5149                                   SUPPORTED_LCD_REFRESHRATE_60Hz          0x0020
5150 ucMemoryType:                     [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved.
5151 ucUMAChannelNumber:      	        System memory channel numbers.
5152 ulCSR_M3_ARB_CNTL_DEFAULT[10]:    Arrays with values for CSR M3 arbiter for default
5153 ulCSR_M3_ARB_CNTL_UVD[10]:        Arrays with values for CSR M3 arbiter for UVD playback.
5154 ulCSR_M3_ARB_CNTL_FS3D[10]:       Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
5155 sAvail_SCLK[5]:                   Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
5156 ulGMCRestoreResetTime:            GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
5157 ulMinimumNClk:                    Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz.
5158 ulIdleNClk:                       NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
5159 ulDDR_DLL_PowerUpTime:            DDR PHY DLL power up time. Unit in ns.
5160 ulDDR_PLL_PowerUpTime:            DDR PHY PLL power up time. Unit in ns.
5161 usPCIEClkSSPercentage:            PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%.
5162 usPCIEClkSSType:                  PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread.
5163 usLvdsSSPercentage:               LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
5164 usLvdsSSpreadRateIn10Hz:          LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
5165 usHDMISSPercentage:               HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting.
5166 usHDMISSpreadRateIn10Hz:          HDMI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting.
5167 usDVISSPercentage:                DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting.
5168 usDVISSpreadRateIn10Hz:           DVI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting.
5169 usMaxLVDSPclkFreqInSingleLink:    Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
5170 ucLVDSMisc:                       [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
5171                                   [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
5172                                   [bit2] LVDS 888bit per color mode  =0: 666 bit per color =1:888 bit per color
5173                                   [bit3] LVDS parameter override enable  =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
5174                                   [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
5175                                   [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4
5176 ucTravisLVDSVolAdjust             When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust
5177                                   value to program Travis register LVDS_CTRL_4
5178 ucLVDSPwrOnSeqDIGONtoDE_in4Ms:    LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ).
5179                                   =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
5180                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5181 ucLVDSPwrOnDEtoVARY_BL_in4Ms:     LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ).
5182                                   =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
5183                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5184 
5185 ucLVDSPwrOffVARY_BLtoDE_in4Ms:    LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off.
5186                                   =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
5187                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5188 
5189 ucLVDSPwrOffDEtoDIGON_in4Ms:      LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off.
5190                                   =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
5191                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5192 
5193 ucLVDSOffToOnDelay_in4Ms:         LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active.
5194                                   =0 means to use VBIOS default delay which is 125 ( 500ms ).
5195                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5196 
5197 ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms:
5198                                   LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active.
5199                                   =0 means to use VBIOS default delay which is 0 ( 0ms ).
5200                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5201 
5202 ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms:
5203                                   LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off.
5204                                   =0 means to use VBIOS default delay which is 0 ( 0ms ).
5205                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5206 
5207 ucMinAllowedBL_Level:             Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0.
5208 
5209 ulNbpStateMemclkFreq[4]:          system memory clock frequncey in unit of 10Khz in different NB pstate.
5210 
5211 **********************************************************************************************************************/
5212 
5213 // this IntegrateSystemInfoTable is used for Kaveri & Kabini APU
5214 typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_8
5215 {
5216   ATOM_COMMON_TABLE_HEADER   sHeader;
5217   ULONG  ulBootUpEngineClock;
5218   ULONG  ulDentistVCOFreq;
5219   ULONG  ulBootUpUMAClock;
5220   ATOM_CLK_VOLT_CAPABILITY   sDISPCLK_Voltage[4];
5221   ULONG  ulBootUpReqDisplayVector;
5222   ULONG  ulVBIOSMisc;
5223   ULONG  ulGPUCapInfo;
5224   ULONG  ulDISP_CLK2Freq;
5225   USHORT usRequestedPWMFreqInHz;
5226   UCHAR  ucHtcTmpLmt;
5227   UCHAR  ucHtcHystLmt;
5228   ULONG  ulReserved2;
5229   ULONG  ulSystemConfig;
5230   ULONG  ulCPUCapInfo;
5231   ULONG  ulReserved3;
5232   USHORT usGPUReservedSysMemSize;
5233   USHORT usExtDispConnInfoOffset;
5234   USHORT usPanelRefreshRateRange;
5235   UCHAR  ucMemoryType;
5236   UCHAR  ucUMAChannelNumber;
5237   UCHAR  strVBIOSMsg[40];
5238   ATOM_TDP_CONFIG  asTdpConfig;
5239   ULONG  ulReserved[19];
5240   ATOM_AVAILABLE_SCLK_LIST   sAvail_SCLK[5];
5241   ULONG  ulGMCRestoreResetTime;
5242   ULONG  ulReserved4;
5243   ULONG  ulIdleNClk;
5244   ULONG  ulDDR_DLL_PowerUpTime;
5245   ULONG  ulDDR_PLL_PowerUpTime;
5246   USHORT usPCIEClkSSPercentage;
5247   USHORT usPCIEClkSSType;
5248   USHORT usLvdsSSPercentage;
5249   USHORT usLvdsSSpreadRateIn10Hz;
5250   USHORT usHDMISSPercentage;
5251   USHORT usHDMISSpreadRateIn10Hz;
5252   USHORT usDVISSPercentage;
5253   USHORT usDVISSpreadRateIn10Hz;
5254   ULONG  ulGPUReservedSysMemBaseAddrLo;
5255   ULONG  ulGPUReservedSysMemBaseAddrHi;
5256   ULONG  ulReserved5[3];
5257   USHORT usMaxLVDSPclkFreqInSingleLink;
5258   UCHAR  ucLvdsMisc;
5259   UCHAR  ucTravisLVDSVolAdjust;
5260   UCHAR  ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
5261   UCHAR  ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
5262   UCHAR  ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
5263   UCHAR  ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
5264   UCHAR  ucLVDSOffToOnDelay_in4Ms;
5265   UCHAR  ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
5266   UCHAR  ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
5267   UCHAR  ucMinAllowedBL_Level;
5268   ULONG  ulLCDBitDepthControlVal;
5269   ULONG  ulNbpStateMemclkFreq[4];
5270   ULONG  ulReserved6;
5271   ULONG  ulNbpStateNClkFreq[4];
5272   USHORT usNBPStateVoltage[4];
5273   USHORT usBootUpNBVoltage;
5274   USHORT usReserved2;
5275   ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
5276 }ATOM_INTEGRATED_SYSTEM_INFO_V1_8;
5277 
5278 /**********************************************************************************************************************
5279   ATOM_INTEGRATED_SYSTEM_INFO_V1_8 Description
5280 ulBootUpEngineClock:              VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
5281 ulDentistVCOFreq:                 Dentist VCO clock in 10kHz unit.
5282 ulBootUpUMAClock:                 System memory boot up clock frequency in 10Khz unit.
5283 sDISPCLK_Voltage:                 Report Display clock frequency requirement on GNB voltage(up to 4 voltage levels).
5284 
5285 ulBootUpReqDisplayVector:         VBIOS boot up display IDs, following are supported devices in Trinity projects:
5286                                   ATOM_DEVICE_CRT1_SUPPORT                  0x0001
5287                                   ATOM_DEVICE_DFP1_SUPPORT                  0x0008
5288                                   ATOM_DEVICE_DFP6_SUPPORT                  0x0040
5289                                   ATOM_DEVICE_DFP2_SUPPORT                  0x0080
5290                                   ATOM_DEVICE_DFP3_SUPPORT                  0x0200
5291                                   ATOM_DEVICE_DFP4_SUPPORT                  0x0400
5292                                   ATOM_DEVICE_DFP5_SUPPORT                  0x0800
5293                                   ATOM_DEVICE_LCD1_SUPPORT                  0x0002
5294 
5295 ulVBIOSMisc:      	              Miscellenous flags for VBIOS requirement and interface
5296                                   bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS.
5297                                         =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS.
5298                                   bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS
5299                                         =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS
5300                                   bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS
5301                                         =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS
5302                                   bit[3]=0: VBIOS fast boot is disable
5303                                         =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open)
5304 
5305 ulGPUCapInfo:                     bit[0~2]= Reserved
5306                                   bit[3]=0: Enable AUX HW mode detection logic
5307                                         =1: Disable AUX HW mode detection logic
5308                                   bit[4]=0: Disable DFS bypass feature
5309                                         =1: Enable DFS bypass feature
5310 
5311 usRequestedPWMFreqInHz:           When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
5312                                   Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
5313 
5314                                   When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
5315                                   1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
5316                                   VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
5317                                   Changing BL using VBIOS function is functional in both driver and non-driver present environment;
5318                                   and enabling VariBri under the driver environment from PP table is optional.
5319 
5320                                   2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
5321                                   that BL control from GPU is expected.
5322                                   VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
5323                                   Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
5324                                   it's per platform
5325                                   and enabling VariBri under the driver environment from PP table is optional.
5326 
5327 ucHtcTmpLmt:                      Refer to D18F3x64 bit[22:16], HtcTmpLmt. Threshold on value to enter HTC_active state.
5328 ucHtcHystLmt:                     Refer to D18F3x64 bit[27:24], HtcHystLmt.
5329                                   To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
5330 
5331 ulSystemConfig:                   Bit[0]=0: PCIE Power Gating Disabled
5332                                         =1: PCIE Power Gating Enabled
5333                                   Bit[1]=0: DDR-DLL shut-down feature disabled.
5334                                          1: DDR-DLL shut-down feature enabled.
5335                                   Bit[2]=0: DDR-PLL Power down feature disabled.
5336                                          1: DDR-PLL Power down feature enabled.
5337                                   Bit[3]=0: GNB DPM is disabled
5338                                         =1: GNB DPM is enabled
5339 ulCPUCapInfo:                     TBD
5340 
5341 usExtDispConnInfoOffset:          Offset to sExtDispConnInfo inside the structure
5342 usPanelRefreshRateRange:          Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
5343                                   to indicate a range.
5344                                   SUPPORTED_LCD_REFRESHRATE_30Hz          0x0004
5345                                   SUPPORTED_LCD_REFRESHRATE_40Hz          0x0008
5346                                   SUPPORTED_LCD_REFRESHRATE_50Hz          0x0010
5347                                   SUPPORTED_LCD_REFRESHRATE_60Hz          0x0020
5348 
5349 ucMemoryType:                     [3:0]=1:DDR1;=2:DDR2;=3:DDR3;=5:GDDR5; [7:4] is reserved.
5350 ucUMAChannelNumber:      	        System memory channel numbers.
5351 
5352 strVBIOSMsg[40]:                  VBIOS boot up customized message string
5353 
5354 sAvail_SCLK[5]:                   Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
5355 
5356 ulGMCRestoreResetTime:            GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
5357 ulIdleNClk:                       NCLK speed while memory runs in self-refresh state, used to calculate self-refresh latency. Unit in 10kHz.
5358 ulDDR_DLL_PowerUpTime:            DDR PHY DLL power up time. Unit in ns.
5359 ulDDR_PLL_PowerUpTime:            DDR PHY PLL power up time. Unit in ns.
5360 
5361 usPCIEClkSSPercentage:            PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%.
5362 usPCIEClkSSType:                  PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread.
5363 usLvdsSSPercentage:               LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
5364 usLvdsSSpreadRateIn10Hz:          LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
5365 usHDMISSPercentage:               HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting.
5366 usHDMISSpreadRateIn10Hz:          HDMI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting.
5367 usDVISSPercentage:                DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting.
5368 usDVISSpreadRateIn10Hz:           DVI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting.
5369 
5370 usGPUReservedSysMemSize:          Reserved system memory size for ACP engine in APU GNB, units in MB. 0/2/4MB based on CMOS options, current default could be 0MB. KV only, not on KB.
5371 ulGPUReservedSysMemBaseAddrLo:    Low 32 bits base address to the reserved system memory.
5372 ulGPUReservedSysMemBaseAddrHi:    High 32 bits base address to the reserved system memory.
5373 
5374 usMaxLVDSPclkFreqInSingleLink:    Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
5375 ucLVDSMisc:                       [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
5376                                   [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
5377                                   [bit2] LVDS 888bit per color mode  =0: 666 bit per color =1:888 bit per color
5378                                   [bit3] LVDS parameter override enable  =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
5379                                   [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
5380                                   [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4
5381 ucTravisLVDSVolAdjust             When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust
5382                                   value to program Travis register LVDS_CTRL_4
5383 ucLVDSPwrOnSeqDIGONtoDE_in4Ms:
5384                                   LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ).
5385                                   =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
5386                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5387 ucLVDSPwrOnDEtoVARY_BL_in4Ms:
5388                                   LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ).
5389                                   =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
5390                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5391 ucLVDSPwrOffVARY_BLtoDE_in4Ms:
5392                                   LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off.
5393                                   =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
5394                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5395 ucLVDSPwrOffDEtoDIGON_in4Ms:
5396                                    LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off.
5397                                   =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
5398                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5399 ucLVDSOffToOnDelay_in4Ms:
5400                                   LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active.
5401                                   =0 means to use VBIOS default delay which is 125 ( 500ms ).
5402                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5403 ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms:
5404                                   LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active.
5405                                   =0 means to use VBIOS default delay which is 0 ( 0ms ).
5406                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5407 
5408 ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms:
5409                                   LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off.
5410                                   =0 means to use VBIOS default delay which is 0 ( 0ms ).
5411                                   This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
5412 ucMinAllowedBL_Level:             Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0.
5413 
5414 ulLCDBitDepthControlVal:          GPU display control encoder bit dither control setting, used to program register mmFMT_BIT_DEPTH_CONTROL
5415 
5416 ulNbpStateMemclkFreq[4]:          system memory clock frequncey in unit of 10Khz in different NB P-State(P0, P1, P2 & P3).
5417 ulNbpStateNClkFreq[4]:            NB P-State NClk frequency in different NB P-State
5418 usNBPStateVoltage[4]:             NB P-State (P0/P1 & P2/P3) voltage; NBP3 refers to lowes voltage
5419 usBootUpNBVoltage:                NB P-State voltage during boot up before driver loaded
5420 sExtDispConnInfo:                 Display connector information table provided to VBIOS
5421 
5422 **********************************************************************************************************************/
5423 
5424 // this Table is used for Kaveri/Kabini APU
5425 typedef struct _ATOM_FUSION_SYSTEM_INFO_V2
5426 {
5427   ATOM_INTEGRATED_SYSTEM_INFO_V1_8    sIntegratedSysInfo;       // refer to ATOM_INTEGRATED_SYSTEM_INFO_V1_8 definition
5428   ULONG                               ulPowerplayTable[128];    // Update comments here to link new powerplay table definition structure
5429 }ATOM_FUSION_SYSTEM_INFO_V2;
5430 
5431 
5432 /**************************************************************************/
5433 // This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design
5434 //Memory SS Info Table
5435 //Define Memory Clock SS chip ID
5436 #define ICS91719  1
5437 #define ICS91720  2
5438 
5439 //Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol
5440 typedef struct _ATOM_I2C_DATA_RECORD
5441 {
5442   UCHAR         ucNunberOfBytes;                                              //Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop"
5443   UCHAR         ucI2CData[1];                                                 //I2C data in bytes, should be less than 16 bytes usually
5444 }ATOM_I2C_DATA_RECORD;
5445 
5446 
5447 //Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information
5448 typedef struct _ATOM_I2C_DEVICE_SETUP_INFO
5449 {
5450   ATOM_I2C_ID_CONFIG_ACCESS       sucI2cId;               //I2C line and HW/SW assisted cap.
5451   UCHAR		                        ucSSChipID;             //SS chip being used
5452   UCHAR		                        ucSSChipSlaveAddr;      //Slave Address to set up this SS chip
5453   UCHAR                           ucNumOfI2CDataRecords;  //number of data block
5454   ATOM_I2C_DATA_RECORD            asI2CData[1];
5455 }ATOM_I2C_DEVICE_SETUP_INFO;
5456 
5457 //==========================================================================================
5458 typedef struct  _ATOM_ASIC_MVDD_INFO
5459 {
5460   ATOM_COMMON_TABLE_HEADER	      sHeader;
5461   ATOM_I2C_DEVICE_SETUP_INFO      asI2CSetup[1];
5462 }ATOM_ASIC_MVDD_INFO;
5463 
5464 //==========================================================================================
5465 #define ATOM_MCLK_SS_INFO         ATOM_ASIC_MVDD_INFO
5466 
5467 //==========================================================================================
5468 /**************************************************************************/
5469 
5470 typedef struct _ATOM_ASIC_SS_ASSIGNMENT
5471 {
5472 	ULONG								ulTargetClockRange;						//Clock Out frequence (VCO ), in unit of 10Khz
5473   USHORT              usSpreadSpectrumPercentage;		//in unit of 0.01%
5474 	USHORT							usSpreadRateInKhz;						//in unit of kHz, modulation freq
5475   UCHAR               ucClockIndication;					  //Indicate which clock source needs SS
5476 	UCHAR								ucSpreadSpectrumMode;					//Bit1=0 Down Spread,=1 Center Spread.
5477 	UCHAR								ucReserved[2];
5478 }ATOM_ASIC_SS_ASSIGNMENT;
5479 
5480 //Define ucClockIndication, SW uses the IDs below to search if the SS is required/enabled on a clock branch/signal type.
5481 //SS is not required or enabled if a match is not found.
5482 #define ASIC_INTERNAL_MEMORY_SS	         1
5483 #define ASIC_INTERNAL_ENGINE_SS	         2
5484 #define ASIC_INTERNAL_UVD_SS             3
5485 #define ASIC_INTERNAL_SS_ON_TMDS         4
5486 #define ASIC_INTERNAL_SS_ON_HDMI         5
5487 #define ASIC_INTERNAL_SS_ON_LVDS         6
5488 #define ASIC_INTERNAL_SS_ON_DP           7
5489 #define ASIC_INTERNAL_SS_ON_DCPLL        8
5490 #define ASIC_EXTERNAL_SS_ON_DP_CLOCK     9
5491 #define ASIC_INTERNAL_VCE_SS             10
5492 #define ASIC_INTERNAL_GPUPLL_SS          11
5493 
5494 
5495 typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2
5496 {
5497 	ULONG								ulTargetClockRange;						//For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz
5498                                                     //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 )
5499   USHORT              usSpreadSpectrumPercentage;		//in unit of 0.01% or 0.001%, decided by ucSpreadSpectrumMode bit4
5500 	USHORT							usSpreadRateIn10Hz;						//in unit of 10Hz, modulation freq
5501   UCHAR               ucClockIndication;					  //Indicate which clock source needs SS
5502 	UCHAR								ucSpreadSpectrumMode;					//Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS
5503 	UCHAR								ucReserved[2];
5504 }ATOM_ASIC_SS_ASSIGNMENT_V2;
5505 
5506 //ucSpreadSpectrumMode
5507 //#define ATOM_SS_DOWN_SPREAD_MODE_MASK          0x00000000
5508 //#define ATOM_SS_DOWN_SPREAD_MODE               0x00000000
5509 //#define ATOM_SS_CENTRE_SPREAD_MODE_MASK        0x00000001
5510 //#define ATOM_SS_CENTRE_SPREAD_MODE             0x00000001
5511 //#define ATOM_INTERNAL_SS_MASK                  0x00000000
5512 //#define ATOM_EXTERNAL_SS_MASK                  0x00000002
5513 
5514 typedef struct _ATOM_ASIC_INTERNAL_SS_INFO
5515 {
5516   ATOM_COMMON_TABLE_HEADER	      sHeader;
5517   ATOM_ASIC_SS_ASSIGNMENT		      asSpreadSpectrum[4];
5518 }ATOM_ASIC_INTERNAL_SS_INFO;
5519 
5520 typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V2
5521 {
5522   ATOM_COMMON_TABLE_HEADER	      sHeader;
5523   ATOM_ASIC_SS_ASSIGNMENT_V2		  asSpreadSpectrum[1];      //this is point only.
5524 }ATOM_ASIC_INTERNAL_SS_INFO_V2;
5525 
5526 typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V3
5527 {
5528 	ULONG								ulTargetClockRange;						//For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz
5529                                                     //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 )
5530   USHORT              usSpreadSpectrumPercentage;		//in unit of 0.01%
5531 	USHORT							usSpreadRateIn10Hz;						//in unit of 10Hz, modulation freq
5532   UCHAR               ucClockIndication;					  //Indicate which clock source needs SS
5533 	UCHAR								ucSpreadSpectrumMode;					//Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS
5534 	UCHAR								ucReserved[2];
5535 }ATOM_ASIC_SS_ASSIGNMENT_V3;
5536 
5537 //ATOM_ASIC_SS_ASSIGNMENT_V3.ucSpreadSpectrumMode
5538 #define SS_MODE_V3_CENTRE_SPREAD_MASK             0x01
5539 #define SS_MODE_V3_EXTERNAL_SS_MASK               0x02
5540 #define SS_MODE_V3_PERCENTAGE_DIV_BY_1000_MASK    0x10
5541 
5542 typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
5543 {
5544   ATOM_COMMON_TABLE_HEADER	      sHeader;
5545   ATOM_ASIC_SS_ASSIGNMENT_V3		  asSpreadSpectrum[1];      //this is pointer only.
5546 }ATOM_ASIC_INTERNAL_SS_INFO_V3;
5547 
5548 
5549 //==============================Scratch Pad Definition Portion===============================
5550 #define ATOM_DEVICE_CONNECT_INFO_DEF  0
5551 #define ATOM_ROM_LOCATION_DEF         1
5552 #define ATOM_TV_STANDARD_DEF          2
5553 #define ATOM_ACTIVE_INFO_DEF          3
5554 #define ATOM_LCD_INFO_DEF             4
5555 #define ATOM_DOS_REQ_INFO_DEF         5
5556 #define ATOM_ACC_CHANGE_INFO_DEF      6
5557 #define ATOM_DOS_MODE_INFO_DEF        7
5558 #define ATOM_I2C_CHANNEL_STATUS_DEF   8
5559 #define ATOM_I2C_CHANNEL_STATUS1_DEF  9
5560 #define ATOM_INTERNAL_TIMER_DEF       10
5561 
5562 // BIOS_0_SCRATCH Definition
5563 #define ATOM_S0_CRT1_MONO               0x00000001L
5564 #define ATOM_S0_CRT1_COLOR              0x00000002L
5565 #define ATOM_S0_CRT1_MASK               (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR)
5566 
5567 #define ATOM_S0_TV1_COMPOSITE_A         0x00000004L
5568 #define ATOM_S0_TV1_SVIDEO_A            0x00000008L
5569 #define ATOM_S0_TV1_MASK_A              (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A)
5570 
5571 #define ATOM_S0_CV_A                    0x00000010L
5572 #define ATOM_S0_CV_DIN_A                0x00000020L
5573 #define ATOM_S0_CV_MASK_A               (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A)
5574 
5575 
5576 #define ATOM_S0_CRT2_MONO               0x00000100L
5577 #define ATOM_S0_CRT2_COLOR              0x00000200L
5578 #define ATOM_S0_CRT2_MASK               (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR)
5579 
5580 #define ATOM_S0_TV1_COMPOSITE           0x00000400L
5581 #define ATOM_S0_TV1_SVIDEO              0x00000800L
5582 #define ATOM_S0_TV1_SCART               0x00004000L
5583 #define ATOM_S0_TV1_MASK                (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART)
5584 
5585 #define ATOM_S0_CV                      0x00001000L
5586 #define ATOM_S0_CV_DIN                  0x00002000L
5587 #define ATOM_S0_CV_MASK                 (ATOM_S0_CV+ATOM_S0_CV_DIN)
5588 
5589 #define ATOM_S0_DFP1                    0x00010000L
5590 #define ATOM_S0_DFP2                    0x00020000L
5591 #define ATOM_S0_LCD1                    0x00040000L
5592 #define ATOM_S0_LCD2                    0x00080000L
5593 #define ATOM_S0_DFP6                    0x00100000L
5594 #define ATOM_S0_DFP3                    0x00200000L
5595 #define ATOM_S0_DFP4                    0x00400000L
5596 #define ATOM_S0_DFP5                    0x00800000L
5597 
5598 #define ATOM_S0_DFP_MASK                ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5 | ATOM_S0_DFP6
5599 
5600 #define ATOM_S0_FAD_REGISTER_BUG        0x02000000L // If set, indicates we are running a PCIE asic with
5601                                                     // the FAD/HDP reg access bug.  Bit is read by DAL, this is obsolete from RV5xx
5602 
5603 #define ATOM_S0_THERMAL_STATE_MASK      0x1C000000L
5604 #define ATOM_S0_THERMAL_STATE_SHIFT     26
5605 
5606 #define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L
5607 #define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29
5608 
5609 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC     1
5610 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC     2
5611 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
5612 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4
5613 
5614 //Byte aligned definition for BIOS usage
5615 #define ATOM_S0_CRT1_MONOb0             0x01
5616 #define ATOM_S0_CRT1_COLORb0            0x02
5617 #define ATOM_S0_CRT1_MASKb0             (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
5618 
5619 #define ATOM_S0_TV1_COMPOSITEb0         0x04
5620 #define ATOM_S0_TV1_SVIDEOb0            0x08
5621 #define ATOM_S0_TV1_MASKb0              (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0)
5622 
5623 #define ATOM_S0_CVb0                    0x10
5624 #define ATOM_S0_CV_DINb0                0x20
5625 #define ATOM_S0_CV_MASKb0               (ATOM_S0_CVb0+ATOM_S0_CV_DINb0)
5626 
5627 #define ATOM_S0_CRT2_MONOb1             0x01
5628 #define ATOM_S0_CRT2_COLORb1            0x02
5629 #define ATOM_S0_CRT2_MASKb1             (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1)
5630 
5631 #define ATOM_S0_TV1_COMPOSITEb1         0x04
5632 #define ATOM_S0_TV1_SVIDEOb1            0x08
5633 #define ATOM_S0_TV1_SCARTb1             0x40
5634 #define ATOM_S0_TV1_MASKb1              (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1)
5635 
5636 #define ATOM_S0_CVb1                    0x10
5637 #define ATOM_S0_CV_DINb1                0x20
5638 #define ATOM_S0_CV_MASKb1               (ATOM_S0_CVb1+ATOM_S0_CV_DINb1)
5639 
5640 #define ATOM_S0_DFP1b2                  0x01
5641 #define ATOM_S0_DFP2b2                  0x02
5642 #define ATOM_S0_LCD1b2                  0x04
5643 #define ATOM_S0_LCD2b2                  0x08
5644 #define ATOM_S0_DFP6b2                  0x10
5645 #define ATOM_S0_DFP3b2                  0x20
5646 #define ATOM_S0_DFP4b2                  0x40
5647 #define ATOM_S0_DFP5b2                  0x80
5648 
5649 
5650 #define ATOM_S0_THERMAL_STATE_MASKb3    0x1C
5651 #define ATOM_S0_THERMAL_STATE_SHIFTb3   2
5652 
5653 #define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0
5654 #define ATOM_S0_LCD1_SHIFT              18
5655 
5656 // BIOS_1_SCRATCH Definition
5657 #define ATOM_S1_ROM_LOCATION_MASK       0x0000FFFFL
5658 #define ATOM_S1_PCI_BUS_DEV_MASK        0xFFFF0000L
5659 
5660 //	BIOS_2_SCRATCH Definition
5661 #define ATOM_S2_TV1_STANDARD_MASK       0x0000000FL
5662 #define ATOM_S2_CURRENT_BL_LEVEL_MASK   0x0000FF00L
5663 #define ATOM_S2_CURRENT_BL_LEVEL_SHIFT  8
5664 
5665 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK       0x0C000000L
5666 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26
5667 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE     0x10000000L
5668 
5669 #define ATOM_S2_DEVICE_DPMS_STATE       0x00010000L
5670 #define ATOM_S2_VRI_BRIGHT_ENABLE       0x20000000L
5671 
5672 #define ATOM_S2_DISPLAY_ROTATION_0_DEGREE     0x0
5673 #define ATOM_S2_DISPLAY_ROTATION_90_DEGREE    0x1
5674 #define ATOM_S2_DISPLAY_ROTATION_180_DEGREE   0x2
5675 #define ATOM_S2_DISPLAY_ROTATION_270_DEGREE   0x3
5676 #define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30
5677 #define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK   0xC0000000L
5678 
5679 
5680 //Byte aligned definition for BIOS usage
5681 #define ATOM_S2_TV1_STANDARD_MASKb0     0x0F
5682 #define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
5683 #define ATOM_S2_DEVICE_DPMS_STATEb2     0x01
5684 
5685 #define ATOM_S2_DEVICE_DPMS_MASKw1      0x3FF
5686 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3     0x0C
5687 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3   0x10
5688 #define ATOM_S2_TMDS_COHERENT_MODEb3    0x10          // used by VBIOS code only, use coherent mode for TMDS/HDMI mode
5689 #define ATOM_S2_VRI_BRIGHT_ENABLEb3     0x20
5690 #define ATOM_S2_ROTATION_STATE_MASKb3   0xC0
5691 
5692 
5693 // BIOS_3_SCRATCH Definition
5694 #define ATOM_S3_CRT1_ACTIVE             0x00000001L
5695 #define ATOM_S3_LCD1_ACTIVE             0x00000002L
5696 #define ATOM_S3_TV1_ACTIVE              0x00000004L
5697 #define ATOM_S3_DFP1_ACTIVE             0x00000008L
5698 #define ATOM_S3_CRT2_ACTIVE             0x00000010L
5699 #define ATOM_S3_LCD2_ACTIVE             0x00000020L
5700 #define ATOM_S3_DFP6_ACTIVE             0x00000040L
5701 #define ATOM_S3_DFP2_ACTIVE             0x00000080L
5702 #define ATOM_S3_CV_ACTIVE               0x00000100L
5703 #define ATOM_S3_DFP3_ACTIVE							0x00000200L
5704 #define ATOM_S3_DFP4_ACTIVE							0x00000400L
5705 #define ATOM_S3_DFP5_ACTIVE							0x00000800L
5706 
5707 #define ATOM_S3_DEVICE_ACTIVE_MASK      0x00000FFFL
5708 
5709 #define ATOM_S3_LCD_FULLEXPANSION_ACTIVE         0x00001000L
5710 #define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L
5711 
5712 #define ATOM_S3_CRT1_CRTC_ACTIVE        0x00010000L
5713 #define ATOM_S3_LCD1_CRTC_ACTIVE        0x00020000L
5714 #define ATOM_S3_TV1_CRTC_ACTIVE         0x00040000L
5715 #define ATOM_S3_DFP1_CRTC_ACTIVE        0x00080000L
5716 #define ATOM_S3_CRT2_CRTC_ACTIVE        0x00100000L
5717 #define ATOM_S3_LCD2_CRTC_ACTIVE        0x00200000L
5718 #define ATOM_S3_DFP6_CRTC_ACTIVE        0x00400000L
5719 #define ATOM_S3_DFP2_CRTC_ACTIVE        0x00800000L
5720 #define ATOM_S3_CV_CRTC_ACTIVE          0x01000000L
5721 #define ATOM_S3_DFP3_CRTC_ACTIVE				0x02000000L
5722 #define ATOM_S3_DFP4_CRTC_ACTIVE				0x04000000L
5723 #define ATOM_S3_DFP5_CRTC_ACTIVE				0x08000000L
5724 
5725 #define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L
5726 #define ATOM_S3_ASIC_GUI_ENGINE_HUNG    0x20000000L
5727 //Below two definitions are not supported in pplib, but in the old powerplay in DAL
5728 #define ATOM_S3_ALLOW_FAST_PWR_SWITCH   0x40000000L
5729 #define ATOM_S3_RQST_GPU_USE_MIN_PWR    0x80000000L
5730 
5731 //Byte aligned definition for BIOS usage
5732 #define ATOM_S3_CRT1_ACTIVEb0           0x01
5733 #define ATOM_S3_LCD1_ACTIVEb0           0x02
5734 #define ATOM_S3_TV1_ACTIVEb0            0x04
5735 #define ATOM_S3_DFP1_ACTIVEb0           0x08
5736 #define ATOM_S3_CRT2_ACTIVEb0           0x10
5737 #define ATOM_S3_LCD2_ACTIVEb0           0x20
5738 #define ATOM_S3_DFP6_ACTIVEb0           0x40
5739 #define ATOM_S3_DFP2_ACTIVEb0           0x80
5740 #define ATOM_S3_CV_ACTIVEb1             0x01
5741 #define ATOM_S3_DFP3_ACTIVEb1						0x02
5742 #define ATOM_S3_DFP4_ACTIVEb1						0x04
5743 #define ATOM_S3_DFP5_ACTIVEb1						0x08
5744 
5745 #define ATOM_S3_ACTIVE_CRTC1w0          0xFFF
5746 
5747 #define ATOM_S3_CRT1_CRTC_ACTIVEb2      0x01
5748 #define ATOM_S3_LCD1_CRTC_ACTIVEb2      0x02
5749 #define ATOM_S3_TV1_CRTC_ACTIVEb2       0x04
5750 #define ATOM_S3_DFP1_CRTC_ACTIVEb2      0x08
5751 #define ATOM_S3_CRT2_CRTC_ACTIVEb2      0x10
5752 #define ATOM_S3_LCD2_CRTC_ACTIVEb2      0x20
5753 #define ATOM_S3_DFP6_CRTC_ACTIVEb2      0x40
5754 #define ATOM_S3_DFP2_CRTC_ACTIVEb2      0x80
5755 #define ATOM_S3_CV_CRTC_ACTIVEb3        0x01
5756 #define ATOM_S3_DFP3_CRTC_ACTIVEb3			0x02
5757 #define ATOM_S3_DFP4_CRTC_ACTIVEb3			0x04
5758 #define ATOM_S3_DFP5_CRTC_ACTIVEb3			0x08
5759 
5760 #define ATOM_S3_ACTIVE_CRTC2w1          0xFFF
5761 
5762 // BIOS_4_SCRATCH Definition
5763 #define ATOM_S4_LCD1_PANEL_ID_MASK      0x000000FFL
5764 #define ATOM_S4_LCD1_REFRESH_MASK       0x0000FF00L
5765 #define ATOM_S4_LCD1_REFRESH_SHIFT      8
5766 
5767 //Byte aligned definition for BIOS usage
5768 #define ATOM_S4_LCD1_PANEL_ID_MASKb0	  0x0FF
5769 #define ATOM_S4_LCD1_REFRESH_MASKb1		  ATOM_S4_LCD1_PANEL_ID_MASKb0
5770 #define ATOM_S4_VRAM_INFO_MASKb2        ATOM_S4_LCD1_PANEL_ID_MASKb0
5771 
5772 // BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!!
5773 #define ATOM_S5_DOS_REQ_CRT1b0          0x01
5774 #define ATOM_S5_DOS_REQ_LCD1b0          0x02
5775 #define ATOM_S5_DOS_REQ_TV1b0           0x04
5776 #define ATOM_S5_DOS_REQ_DFP1b0          0x08
5777 #define ATOM_S5_DOS_REQ_CRT2b0          0x10
5778 #define ATOM_S5_DOS_REQ_LCD2b0          0x20
5779 #define ATOM_S5_DOS_REQ_DFP6b0          0x40
5780 #define ATOM_S5_DOS_REQ_DFP2b0          0x80
5781 #define ATOM_S5_DOS_REQ_CVb1            0x01
5782 #define ATOM_S5_DOS_REQ_DFP3b1					0x02
5783 #define ATOM_S5_DOS_REQ_DFP4b1					0x04
5784 #define ATOM_S5_DOS_REQ_DFP5b1					0x08
5785 
5786 #define ATOM_S5_DOS_REQ_DEVICEw0        0x0FFF
5787 
5788 #define ATOM_S5_DOS_REQ_CRT1            0x0001
5789 #define ATOM_S5_DOS_REQ_LCD1            0x0002
5790 #define ATOM_S5_DOS_REQ_TV1             0x0004
5791 #define ATOM_S5_DOS_REQ_DFP1            0x0008
5792 #define ATOM_S5_DOS_REQ_CRT2            0x0010
5793 #define ATOM_S5_DOS_REQ_LCD2            0x0020
5794 #define ATOM_S5_DOS_REQ_DFP6            0x0040
5795 #define ATOM_S5_DOS_REQ_DFP2            0x0080
5796 #define ATOM_S5_DOS_REQ_CV              0x0100
5797 #define ATOM_S5_DOS_REQ_DFP3            0x0200
5798 #define ATOM_S5_DOS_REQ_DFP4            0x0400
5799 #define ATOM_S5_DOS_REQ_DFP5            0x0800
5800 
5801 #define ATOM_S5_DOS_FORCE_CRT1b2        ATOM_S5_DOS_REQ_CRT1b0
5802 #define ATOM_S5_DOS_FORCE_TV1b2         ATOM_S5_DOS_REQ_TV1b0
5803 #define ATOM_S5_DOS_FORCE_CRT2b2        ATOM_S5_DOS_REQ_CRT2b0
5804 #define ATOM_S5_DOS_FORCE_CVb3          ATOM_S5_DOS_REQ_CVb1
5805 #define ATOM_S5_DOS_FORCE_DEVICEw1      (ATOM_S5_DOS_FORCE_CRT1b2+ATOM_S5_DOS_FORCE_TV1b2+ATOM_S5_DOS_FORCE_CRT2b2+\
5806                                         (ATOM_S5_DOS_FORCE_CVb3<<8))
5807 
5808 // BIOS_6_SCRATCH Definition
5809 #define ATOM_S6_DEVICE_CHANGE           0x00000001L
5810 #define ATOM_S6_SCALER_CHANGE           0x00000002L
5811 #define ATOM_S6_LID_CHANGE              0x00000004L
5812 #define ATOM_S6_DOCKING_CHANGE          0x00000008L
5813 #define ATOM_S6_ACC_MODE                0x00000010L
5814 #define ATOM_S6_EXT_DESKTOP_MODE        0x00000020L
5815 #define ATOM_S6_LID_STATE               0x00000040L
5816 #define ATOM_S6_DOCK_STATE              0x00000080L
5817 #define ATOM_S6_CRITICAL_STATE          0x00000100L
5818 #define ATOM_S6_HW_I2C_BUSY_STATE       0x00000200L
5819 #define ATOM_S6_THERMAL_STATE_CHANGE    0x00000400L
5820 #define ATOM_S6_INTERRUPT_SET_BY_BIOS   0x00000800L
5821 #define ATOM_S6_REQ_LCD_EXPANSION_FULL         0x00001000L //Normal expansion Request bit for LCD
5822 #define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO  0x00002000L //Aspect ratio expansion Request bit for LCD
5823 
5824 #define ATOM_S6_DISPLAY_STATE_CHANGE    0x00004000L        //This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion
5825 #define ATOM_S6_I2C_STATE_CHANGE        0x00008000L        //This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion
5826 
5827 #define ATOM_S6_ACC_REQ_CRT1            0x00010000L
5828 #define ATOM_S6_ACC_REQ_LCD1            0x00020000L
5829 #define ATOM_S6_ACC_REQ_TV1             0x00040000L
5830 #define ATOM_S6_ACC_REQ_DFP1            0x00080000L
5831 #define ATOM_S6_ACC_REQ_CRT2            0x00100000L
5832 #define ATOM_S6_ACC_REQ_LCD2            0x00200000L
5833 #define ATOM_S6_ACC_REQ_DFP6            0x00400000L
5834 #define ATOM_S6_ACC_REQ_DFP2            0x00800000L
5835 #define ATOM_S6_ACC_REQ_CV              0x01000000L
5836 #define ATOM_S6_ACC_REQ_DFP3						0x02000000L
5837 #define ATOM_S6_ACC_REQ_DFP4						0x04000000L
5838 #define ATOM_S6_ACC_REQ_DFP5						0x08000000L
5839 
5840 #define ATOM_S6_ACC_REQ_MASK                0x0FFF0000L
5841 #define ATOM_S6_SYSTEM_POWER_MODE_CHANGE    0x10000000L
5842 #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH    0x20000000L
5843 #define ATOM_S6_VRI_BRIGHTNESS_CHANGE       0x40000000L
5844 #define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK  0x80000000L
5845 
5846 //Byte aligned definition for BIOS usage
5847 #define ATOM_S6_DEVICE_CHANGEb0         0x01
5848 #define ATOM_S6_SCALER_CHANGEb0         0x02
5849 #define ATOM_S6_LID_CHANGEb0            0x04
5850 #define ATOM_S6_DOCKING_CHANGEb0        0x08
5851 #define ATOM_S6_ACC_MODEb0              0x10
5852 #define ATOM_S6_EXT_DESKTOP_MODEb0      0x20
5853 #define ATOM_S6_LID_STATEb0             0x40
5854 #define ATOM_S6_DOCK_STATEb0            0x80
5855 #define ATOM_S6_CRITICAL_STATEb1        0x01
5856 #define ATOM_S6_HW_I2C_BUSY_STATEb1     0x02
5857 #define ATOM_S6_THERMAL_STATE_CHANGEb1  0x04
5858 #define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08
5859 #define ATOM_S6_REQ_LCD_EXPANSION_FULLb1        0x10
5860 #define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20
5861 
5862 #define ATOM_S6_ACC_REQ_CRT1b2          0x01
5863 #define ATOM_S6_ACC_REQ_LCD1b2          0x02
5864 #define ATOM_S6_ACC_REQ_TV1b2           0x04
5865 #define ATOM_S6_ACC_REQ_DFP1b2          0x08
5866 #define ATOM_S6_ACC_REQ_CRT2b2          0x10
5867 #define ATOM_S6_ACC_REQ_LCD2b2          0x20
5868 #define ATOM_S6_ACC_REQ_DFP6b2          0x40
5869 #define ATOM_S6_ACC_REQ_DFP2b2          0x80
5870 #define ATOM_S6_ACC_REQ_CVb3            0x01
5871 #define ATOM_S6_ACC_REQ_DFP3b3          0x02
5872 #define ATOM_S6_ACC_REQ_DFP4b3          0x04
5873 #define ATOM_S6_ACC_REQ_DFP5b3          0x08
5874 
5875 #define ATOM_S6_ACC_REQ_DEVICEw1        ATOM_S5_DOS_REQ_DEVICEw0
5876 #define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10
5877 #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20
5878 #define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3    0x40
5879 #define ATOM_S6_CONFIG_DISPLAY_CHANGEb3    0x80
5880 
5881 #define ATOM_S6_DEVICE_CHANGE_SHIFT             0
5882 #define ATOM_S6_SCALER_CHANGE_SHIFT             1
5883 #define ATOM_S6_LID_CHANGE_SHIFT                2
5884 #define ATOM_S6_DOCKING_CHANGE_SHIFT            3
5885 #define ATOM_S6_ACC_MODE_SHIFT                  4
5886 #define ATOM_S6_EXT_DESKTOP_MODE_SHIFT          5
5887 #define ATOM_S6_LID_STATE_SHIFT                 6
5888 #define ATOM_S6_DOCK_STATE_SHIFT                7
5889 #define ATOM_S6_CRITICAL_STATE_SHIFT            8
5890 #define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT         9
5891 #define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT      10
5892 #define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT     11
5893 #define ATOM_S6_REQ_SCALER_SHIFT                12
5894 #define ATOM_S6_REQ_SCALER_ARATIO_SHIFT         13
5895 #define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT      14
5896 #define ATOM_S6_I2C_STATE_CHANGE_SHIFT          15
5897 #define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT  28
5898 #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT  29
5899 #define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT     30
5900 #define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT     31
5901 
5902 // BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!!
5903 #define ATOM_S7_DOS_MODE_TYPEb0             0x03
5904 #define ATOM_S7_DOS_MODE_VGAb0              0x00
5905 #define ATOM_S7_DOS_MODE_VESAb0             0x01
5906 #define ATOM_S7_DOS_MODE_EXTb0              0x02
5907 #define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0      0x0C
5908 #define ATOM_S7_DOS_MODE_PIXEL_FORMATb0     0xF0
5909 #define ATOM_S7_DOS_8BIT_DAC_ENb1           0x01
5910 #define ATOM_S7_ASIC_INIT_COMPLETEb1        0x02
5911 #define ATOM_S7_ASIC_INIT_COMPLETE_MASK     0x00000200
5912 #define ATOM_S7_DOS_MODE_NUMBERw1           0x0FFFF
5913 
5914 #define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT       8
5915 
5916 // BIOS_8_SCRATCH Definition
5917 #define ATOM_S8_I2C_CHANNEL_BUSY_MASK       0x00000FFFF
5918 #define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK     0x0FFFF0000
5919 
5920 #define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT      0
5921 #define ATOM_S8_I2C_ENGINE_BUSY_SHIFT       16
5922 
5923 // BIOS_9_SCRATCH Definition
5924 #ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK
5925 #define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK  0x0000FFFF
5926 #endif
5927 #ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK
5928 #define ATOM_S9_I2C_CHANNEL_ABORTED_MASK    0xFFFF0000
5929 #endif
5930 #ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT
5931 #define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0
5932 #endif
5933 #ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT
5934 #define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT   16
5935 #endif
5936 
5937 
5938 #define ATOM_FLAG_SET                         0x20
5939 #define ATOM_FLAG_CLEAR                       0
5940 #define CLEAR_ATOM_S6_ACC_MODE                ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR)
5941 #define SET_ATOM_S6_DEVICE_CHANGE             ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET)
5942 #define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE     ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET)
5943 #define SET_ATOM_S6_SCALER_CHANGE             ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET)
5944 #define SET_ATOM_S6_LID_CHANGE                ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET)
5945 
5946 #define SET_ATOM_S6_LID_STATE                 ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET)
5947 #define CLEAR_ATOM_S6_LID_STATE               ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR)
5948 
5949 #define SET_ATOM_S6_DOCK_CHANGE			          ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET)
5950 #define SET_ATOM_S6_DOCK_STATE                ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET)
5951 #define CLEAR_ATOM_S6_DOCK_STATE              ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR)
5952 
5953 #define SET_ATOM_S6_THERMAL_STATE_CHANGE      ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET)
5954 #define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE  ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET)
5955 #define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS     ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET)
5956 
5957 #define SET_ATOM_S6_CRITICAL_STATE            ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET)
5958 #define CLEAR_ATOM_S6_CRITICAL_STATE          ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR)
5959 
5960 #define SET_ATOM_S6_REQ_SCALER                ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET)
5961 #define CLEAR_ATOM_S6_REQ_SCALER              ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR )
5962 
5963 #define SET_ATOM_S6_REQ_SCALER_ARATIO         ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET )
5964 #define CLEAR_ATOM_S6_REQ_SCALER_ARATIO       ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR )
5965 
5966 #define SET_ATOM_S6_I2C_STATE_CHANGE          ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
5967 
5968 #define SET_ATOM_S6_DISPLAY_STATE_CHANGE      ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
5969 
5970 #define SET_ATOM_S6_DEVICE_RECONFIG           ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET)
5971 #define CLEAR_ATOM_S0_LCD1                    ((ATOM_DEVICE_CONNECT_INFO_DEF << 8 )|  ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR )
5972 #define SET_ATOM_S7_DOS_8BIT_DAC_EN           ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET )
5973 #define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN         ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR )
5974 
5975 /****************************************************************************/
5976 //Portion II: Definitions only used in Driver
5977 /****************************************************************************/
5978 
5979 // Macros used by driver
5980 #ifdef __cplusplus
5981 #define GetIndexIntoMasterTable(MasterOrData, FieldName) ((reinterpret_cast<char*>(&(static_cast<ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES*>(0))->FieldName)-static_cast<char*>(0))/sizeof(USHORT))
5982 
5983 #define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) (((static_cast<ATOM_COMMON_TABLE_HEADER*>(TABLE_HEADER_OFFSET))->ucTableFormatRevision )&0x3F)
5984 #define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET)  (((static_cast<ATOM_COMMON_TABLE_HEADER*>(TABLE_HEADER_OFFSET))->ucTableContentRevision)&0x3F)
5985 #else // not __cplusplus
5986 #define	GetIndexIntoMasterTable(MasterOrData, FieldName) (offsetof(ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES, FieldName)/sizeof(USHORT))
5987 
5988 #define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F)
5989 #define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET)  ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F)
5990 #endif // __cplusplus
5991 
5992 #define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION
5993 #define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION
5994 
5995 /****************************************************************************/
5996 //Portion III: Definitinos only used in VBIOS
5997 /****************************************************************************/
5998 #define ATOM_DAC_SRC					0x80
5999 #define ATOM_SRC_DAC1					0
6000 #define ATOM_SRC_DAC2					0x80
6001 
6002 typedef struct _MEMORY_PLLINIT_PARAMETERS
6003 {
6004   ULONG ulTargetMemoryClock; //In 10Khz unit
6005   UCHAR   ucAction;					 //not define yet
6006   UCHAR   ucFbDiv_Hi;				 //Fbdiv Hi byte
6007   UCHAR   ucFbDiv;					 //FB value
6008   UCHAR   ucPostDiv;				 //Post div
6009 }MEMORY_PLLINIT_PARAMETERS;
6010 
6011 #define MEMORY_PLLINIT_PS_ALLOCATION  MEMORY_PLLINIT_PARAMETERS
6012 
6013 
6014 #define	GPIO_PIN_WRITE													0x01
6015 #define	GPIO_PIN_READ														0x00
6016 
6017 typedef struct  _GPIO_PIN_CONTROL_PARAMETERS
6018 {
6019   UCHAR ucGPIO_ID;           //return value, read from GPIO pins
6020   UCHAR ucGPIOBitShift;	     //define which bit in uGPIOBitVal need to be update
6021 	UCHAR ucGPIOBitVal;		     //Set/Reset corresponding bit defined in ucGPIOBitMask
6022   UCHAR ucAction;				     //=GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write
6023 }GPIO_PIN_CONTROL_PARAMETERS;
6024 
6025 typedef struct _ENABLE_SCALER_PARAMETERS
6026 {
6027   UCHAR ucScaler;            // ATOM_SCALER1, ATOM_SCALER2
6028   UCHAR ucEnable;            // ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION
6029   UCHAR ucTVStandard;        //
6030   UCHAR ucPadding[1];
6031 }ENABLE_SCALER_PARAMETERS;
6032 #define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS
6033 
6034 //ucEnable:
6035 #define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION    0
6036 #define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION  1
6037 #define SCALER_ENABLE_2TAP_ALPHA_MODE               2
6038 #define SCALER_ENABLE_MULTITAP_MODE                 3
6039 
6040 typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS
6041 {
6042   ULONG  usHWIconHorzVertPosn;        // Hardware Icon Vertical position
6043   UCHAR  ucHWIconVertOffset;          // Hardware Icon Vertical offset
6044   UCHAR  ucHWIconHorzOffset;          // Hardware Icon Horizontal offset
6045   UCHAR  ucSelection;                 // ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2
6046   UCHAR  ucEnable;                    // ATOM_ENABLE or ATOM_DISABLE
6047 }ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS;
6048 
6049 typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION
6050 {
6051   ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS  sEnableIcon;
6052   ENABLE_CRTC_PARAMETERS                  sReserved;
6053 }ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION;
6054 
6055 typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS
6056 {
6057   USHORT usHight;                     // Image Hight
6058   USHORT usWidth;                     // Image Width
6059   UCHAR  ucSurface;                   // Surface 1 or 2
6060   UCHAR  ucPadding[3];
6061 }ENABLE_GRAPH_SURFACE_PARAMETERS;
6062 
6063 typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2
6064 {
6065   USHORT usHight;                     // Image Hight
6066   USHORT usWidth;                     // Image Width
6067   UCHAR  ucSurface;                   // Surface 1 or 2
6068   UCHAR  ucEnable;                    // ATOM_ENABLE or ATOM_DISABLE
6069   UCHAR  ucPadding[2];
6070 }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2;
6071 
6072 typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3
6073 {
6074   USHORT usHight;                     // Image Hight
6075   USHORT usWidth;                     // Image Width
6076   UCHAR  ucSurface;                   // Surface 1 or 2
6077   UCHAR  ucEnable;                    // ATOM_ENABLE or ATOM_DISABLE
6078   USHORT usDeviceId;                  // Active Device Id for this surface. If no device, set to 0.
6079 }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3;
6080 
6081 typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4
6082 {
6083   USHORT usHight;                     // Image Hight
6084   USHORT usWidth;                     // Image Width
6085   USHORT usGraphPitch;
6086   UCHAR  ucColorDepth;
6087   UCHAR  ucPixelFormat;
6088   UCHAR  ucSurface;                   // Surface 1 or 2
6089   UCHAR  ucEnable;                    // ATOM_ENABLE or ATOM_DISABLE
6090   UCHAR  ucModeType;
6091   UCHAR  ucReserved;
6092 }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4;
6093 
6094 // ucEnable
6095 #define ATOM_GRAPH_CONTROL_SET_PITCH             0x0f
6096 #define ATOM_GRAPH_CONTROL_SET_DISP_START        0x10
6097 
6098 typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION
6099 {
6100   ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface;
6101   ENABLE_YUV_PS_ALLOCATION        sReserved; // Don't set this one
6102 }ENABLE_GRAPH_SURFACE_PS_ALLOCATION;
6103 
6104 typedef struct _MEMORY_CLEAN_UP_PARAMETERS
6105 {
6106   USHORT  usMemoryStart;                //in 8Kb boundary, offset from memory base address
6107   USHORT  usMemorySize;                 //8Kb blocks aligned
6108 }MEMORY_CLEAN_UP_PARAMETERS;
6109 #define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS
6110 
6111 typedef struct  _GET_DISPLAY_SURFACE_SIZE_PARAMETERS
6112 {
6113   USHORT  usX_Size;                     //When use as input parameter, usX_Size indicates which CRTC
6114   USHORT  usY_Size;
6115 }GET_DISPLAY_SURFACE_SIZE_PARAMETERS;
6116 
6117 typedef struct  _GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2
6118 {
6119   union{
6120     USHORT  usX_Size;                     //When use as input parameter, usX_Size indicates which CRTC
6121     USHORT  usSurface;
6122   };
6123   USHORT usY_Size;
6124   USHORT usDispXStart;
6125   USHORT usDispYStart;
6126 }GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2;
6127 
6128 
6129 typedef struct _PALETTE_DATA_CONTROL_PARAMETERS_V3
6130 {
6131   UCHAR  ucLutId;
6132   UCHAR  ucAction;
6133   USHORT usLutStartIndex;
6134   USHORT usLutLength;
6135   USHORT usLutOffsetInVram;
6136 }PALETTE_DATA_CONTROL_PARAMETERS_V3;
6137 
6138 // ucAction:
6139 #define PALETTE_DATA_AUTO_FILL            1
6140 #define PALETTE_DATA_READ                 2
6141 #define PALETTE_DATA_WRITE                3
6142 
6143 
6144 typedef struct _INTERRUPT_SERVICE_PARAMETERS_V2
6145 {
6146   UCHAR  ucInterruptId;
6147   UCHAR  ucServiceId;
6148   UCHAR  ucStatus;
6149   UCHAR  ucReserved;
6150 }INTERRUPT_SERVICE_PARAMETER_V2;
6151 
6152 // ucInterruptId
6153 #define HDP1_INTERRUPT_ID                 1
6154 #define HDP2_INTERRUPT_ID                 2
6155 #define HDP3_INTERRUPT_ID                 3
6156 #define HDP4_INTERRUPT_ID                 4
6157 #define HDP5_INTERRUPT_ID                 5
6158 #define HDP6_INTERRUPT_ID                 6
6159 #define SW_INTERRUPT_ID                   11
6160 
6161 // ucAction
6162 #define INTERRUPT_SERVICE_GEN_SW_INT      1
6163 #define INTERRUPT_SERVICE_GET_STATUS      2
6164 
6165  // ucStatus
6166 #define INTERRUPT_STATUS__INT_TRIGGER     1
6167 #define INTERRUPT_STATUS__HPD_HIGH        2
6168 
6169 typedef struct _INDIRECT_IO_ACCESS
6170 {
6171   ATOM_COMMON_TABLE_HEADER sHeader;
6172   UCHAR                    IOAccessSequence[256];
6173 } INDIRECT_IO_ACCESS;
6174 
6175 #define INDIRECT_READ              0x00
6176 #define INDIRECT_WRITE             0x80
6177 
6178 #define INDIRECT_IO_MM             0
6179 #define INDIRECT_IO_PLL            1
6180 #define INDIRECT_IO_MC             2
6181 #define INDIRECT_IO_PCIE           3
6182 #define INDIRECT_IO_PCIEP          4
6183 #define INDIRECT_IO_NBMISC         5
6184 #define INDIRECT_IO_SMU            5
6185 
6186 #define INDIRECT_IO_PLL_READ       INDIRECT_IO_PLL   | INDIRECT_READ
6187 #define INDIRECT_IO_PLL_WRITE      INDIRECT_IO_PLL   | INDIRECT_WRITE
6188 #define INDIRECT_IO_MC_READ        INDIRECT_IO_MC    | INDIRECT_READ
6189 #define INDIRECT_IO_MC_WRITE       INDIRECT_IO_MC    | INDIRECT_WRITE
6190 #define INDIRECT_IO_PCIE_READ      INDIRECT_IO_PCIE  | INDIRECT_READ
6191 #define INDIRECT_IO_PCIE_WRITE     INDIRECT_IO_PCIE  | INDIRECT_WRITE
6192 #define INDIRECT_IO_PCIEP_READ     INDIRECT_IO_PCIEP | INDIRECT_READ
6193 #define INDIRECT_IO_PCIEP_WRITE    INDIRECT_IO_PCIEP | INDIRECT_WRITE
6194 #define INDIRECT_IO_NBMISC_READ    INDIRECT_IO_NBMISC | INDIRECT_READ
6195 #define INDIRECT_IO_NBMISC_WRITE   INDIRECT_IO_NBMISC | INDIRECT_WRITE
6196 #define INDIRECT_IO_SMU_READ       INDIRECT_IO_SMU | INDIRECT_READ
6197 #define INDIRECT_IO_SMU_WRITE      INDIRECT_IO_SMU | INDIRECT_WRITE
6198 
6199 typedef struct _ATOM_OEM_INFO
6200 {
6201   ATOM_COMMON_TABLE_HEADER	sHeader;
6202   ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
6203 }ATOM_OEM_INFO;
6204 
6205 typedef struct _ATOM_TV_MODE
6206 {
6207    UCHAR	ucVMode_Num;			  //Video mode number
6208    UCHAR	ucTV_Mode_Num;			//Internal TV mode number
6209 }ATOM_TV_MODE;
6210 
6211 typedef struct _ATOM_BIOS_INT_TVSTD_MODE
6212 {
6213   ATOM_COMMON_TABLE_HEADER sHeader;
6214    USHORT	usTV_Mode_LUT_Offset;	// Pointer to standard to internal number conversion table
6215    USHORT	usTV_FIFO_Offset;		  // Pointer to FIFO entry table
6216    USHORT	usNTSC_Tbl_Offset;		// Pointer to SDTV_Mode_NTSC table
6217    USHORT	usPAL_Tbl_Offset;		  // Pointer to SDTV_Mode_PAL table
6218    USHORT	usCV_Tbl_Offset;		  // Pointer to SDTV_Mode_PAL table
6219 }ATOM_BIOS_INT_TVSTD_MODE;
6220 
6221 
6222 typedef struct _ATOM_TV_MODE_SCALER_PTR
6223 {
6224    USHORT	ucFilter0_Offset;		//Pointer to filter format 0 coefficients
6225    USHORT	usFilter1_Offset;		//Pointer to filter format 0 coefficients
6226    UCHAR	ucTV_Mode_Num;
6227 }ATOM_TV_MODE_SCALER_PTR;
6228 
6229 typedef struct _ATOM_STANDARD_VESA_TIMING
6230 {
6231   ATOM_COMMON_TABLE_HEADER sHeader;
6232   ATOM_DTD_FORMAT 				 aModeTimings[16];      // 16 is not the real array number, just for initial allocation
6233 }ATOM_STANDARD_VESA_TIMING;
6234 
6235 
6236 typedef struct _ATOM_STD_FORMAT
6237 {
6238   USHORT    usSTD_HDisp;
6239   USHORT    usSTD_VDisp;
6240   USHORT    usSTD_RefreshRate;
6241   USHORT    usReserved;
6242 }ATOM_STD_FORMAT;
6243 
6244 typedef struct _ATOM_VESA_TO_EXTENDED_MODE
6245 {
6246   USHORT  usVESA_ModeNumber;
6247   USHORT  usExtendedModeNumber;
6248 }ATOM_VESA_TO_EXTENDED_MODE;
6249 
6250 typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT
6251 {
6252   ATOM_COMMON_TABLE_HEADER   sHeader;
6253   ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo[76];
6254 }ATOM_VESA_TO_INTENAL_MODE_LUT;
6255 
6256 /*************** ATOM Memory Related Data Structure ***********************/
6257 typedef struct _ATOM_MEMORY_VENDOR_BLOCK{
6258 	UCHAR												ucMemoryType;
6259 	UCHAR												ucMemoryVendor;
6260 	UCHAR												ucAdjMCId;
6261 	UCHAR												ucDynClkId;
6262 	ULONG												ulDllResetClkRange;
6263 }ATOM_MEMORY_VENDOR_BLOCK;
6264 
6265 
6266 typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG{
6267 #if ATOM_BIG_ENDIAN
6268 	ULONG												ucMemBlkId:8;
6269 	ULONG												ulMemClockRange:24;
6270 #else
6271 	ULONG												ulMemClockRange:24;
6272 	ULONG												ucMemBlkId:8;
6273 #endif
6274 }ATOM_MEMORY_SETTING_ID_CONFIG;
6275 
6276 typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS
6277 {
6278   ATOM_MEMORY_SETTING_ID_CONFIG slAccess;
6279   ULONG                         ulAccess;
6280 }ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS;
6281 
6282 
6283 typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK{
6284 	ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS			ulMemoryID;
6285 	ULONG															        aulMemData[1];
6286 }ATOM_MEMORY_SETTING_DATA_BLOCK;
6287 
6288 
6289 typedef struct _ATOM_INIT_REG_INDEX_FORMAT{
6290 	 USHORT											usRegIndex;                                     // MC register index
6291 	 UCHAR											ucPreRegDataLength;                             // offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf
6292 }ATOM_INIT_REG_INDEX_FORMAT;
6293 
6294 
6295 typedef struct _ATOM_INIT_REG_BLOCK{
6296 	USHORT													usRegIndexTblSize;													//size of asRegIndexBuf
6297 	USHORT													usRegDataBlkSize;														//size of ATOM_MEMORY_SETTING_DATA_BLOCK
6298 	ATOM_INIT_REG_INDEX_FORMAT			asRegIndexBuf[1];
6299 	ATOM_MEMORY_SETTING_DATA_BLOCK	asRegDataBuf[1];
6300 }ATOM_INIT_REG_BLOCK;
6301 
6302 #define END_OF_REG_INDEX_BLOCK  0x0ffff
6303 #define END_OF_REG_DATA_BLOCK   0x00000000
6304 #define ATOM_INIT_REG_MASK_FLAG 0x80               //Not used in BIOS
6305 #define	CLOCK_RANGE_HIGHEST			0x00ffffff
6306 
6307 #define VALUE_DWORD             SIZEOF ULONG
6308 #define VALUE_SAME_AS_ABOVE     0
6309 #define VALUE_MASK_DWORD        0x84
6310 
6311 #define INDEX_ACCESS_RANGE_BEGIN	    (VALUE_DWORD + 1)
6312 #define INDEX_ACCESS_RANGE_END		    (INDEX_ACCESS_RANGE_BEGIN + 1)
6313 #define VALUE_INDEX_ACCESS_SINGLE	    (INDEX_ACCESS_RANGE_END + 1)
6314 //#define ACCESS_MCIODEBUGIND            0x40       //defined in BIOS code
6315 #define ACCESS_PLACEHOLDER             0x80
6316 
6317 typedef struct _ATOM_MC_INIT_PARAM_TABLE
6318 {
6319   ATOM_COMMON_TABLE_HEADER		sHeader;
6320   USHORT											usAdjustARB_SEQDataOffset;
6321   USHORT											usMCInitMemTypeTblOffset;
6322   USHORT											usMCInitCommonTblOffset;
6323   USHORT											usMCInitPowerDownTblOffset;
6324 	ULONG												ulARB_SEQDataBuf[32];
6325 	ATOM_INIT_REG_BLOCK					asMCInitMemType;
6326 	ATOM_INIT_REG_BLOCK					asMCInitCommon;
6327 }ATOM_MC_INIT_PARAM_TABLE;
6328 
6329 
6330 #define _4Mx16              0x2
6331 #define _4Mx32              0x3
6332 #define _8Mx16              0x12
6333 #define _8Mx32              0x13
6334 #define _16Mx16             0x22
6335 #define _16Mx32             0x23
6336 #define _32Mx16             0x32
6337 #define _32Mx32             0x33
6338 #define _64Mx8              0x41
6339 #define _64Mx16             0x42
6340 #define _64Mx32             0x43
6341 #define _128Mx8             0x51
6342 #define _128Mx16            0x52
6343 #define _128Mx32            0x53
6344 #define _256Mx8             0x61
6345 #define _256Mx16            0x62
6346 #define _512Mx8             0x71
6347 
6348 #define SAMSUNG             0x1
6349 #define INFINEON            0x2
6350 #define ELPIDA              0x3
6351 #define ETRON               0x4
6352 #define NANYA               0x5
6353 #define HYNIX               0x6
6354 #define MOSEL               0x7
6355 #define WINBOND             0x8
6356 #define ESMT                0x9
6357 #define MICRON              0xF
6358 
6359 #define QIMONDA             INFINEON
6360 #define PROMOS              MOSEL
6361 #define KRETON              INFINEON
6362 #define ELIXIR              NANYA
6363 #define MEZZA               ELPIDA
6364 
6365 
6366 /////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM/////////////
6367 
6368 #define UCODE_ROM_START_ADDRESS		0x1b800
6369 #define	UCODE_SIGNATURE			0x4375434d // 'MCuC' - MC uCode
6370 
6371 //uCode block header for reference
6372 
6373 typedef struct _MCuCodeHeader
6374 {
6375   ULONG  ulSignature;
6376   UCHAR  ucRevision;
6377   UCHAR  ucChecksum;
6378   UCHAR  ucReserved1;
6379   UCHAR  ucReserved2;
6380   USHORT usParametersLength;
6381   USHORT usUCodeLength;
6382   USHORT usReserved1;
6383   USHORT usReserved2;
6384 } MCuCodeHeader;
6385 
6386 //////////////////////////////////////////////////////////////////////////////////
6387 
6388 #define ATOM_MAX_NUMBER_OF_VRAM_MODULE	16
6389 
6390 #define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK	0xF
6391 typedef struct _ATOM_VRAM_MODULE_V1
6392 {
6393   ULONG                      ulReserved;
6394   USHORT                     usEMRSValue;
6395   USHORT                     usMRSValue;
6396   USHORT                     usReserved;
6397   UCHAR                      ucExtMemoryID;     // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
6398   UCHAR                      ucMemoryType;      // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved;
6399   UCHAR                      ucMemoryVenderID;  // Predefined,never change across designs or memory type/vender
6400   UCHAR                      ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32...
6401   UCHAR                      ucRow;             // Number of Row,in power of 2;
6402   UCHAR                      ucColumn;          // Number of Column,in power of 2;
6403   UCHAR                      ucBank;            // Nunber of Bank;
6404   UCHAR                      ucRank;            // Number of Rank, in power of 2
6405   UCHAR                      ucChannelNum;      // Number of channel;
6406   UCHAR                      ucChannelConfig;   // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2
6407   UCHAR                      ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
6408   UCHAR                      ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
6409   UCHAR                      ucReserved[2];
6410 }ATOM_VRAM_MODULE_V1;
6411 
6412 
6413 typedef struct _ATOM_VRAM_MODULE_V2
6414 {
6415   ULONG                      ulReserved;
6416   ULONG                      ulFlags;     			// To enable/disable functionalities based on memory type
6417   ULONG                      ulEngineClock;     // Override of default engine clock for particular memory type
6418   ULONG                      ulMemoryClock;     // Override of default memory clock for particular memory type
6419   USHORT                     usEMRS2Value;      // EMRS2 Value is used for GDDR2 and GDDR4 memory type
6420   USHORT                     usEMRS3Value;      // EMRS3 Value is used for GDDR2 and GDDR4 memory type
6421   USHORT                     usEMRSValue;
6422   USHORT                     usMRSValue;
6423   USHORT                     usReserved;
6424   UCHAR                      ucExtMemoryID;     // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
6425   UCHAR                      ucMemoryType;      // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now;
6426   UCHAR                      ucMemoryVenderID;  // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed
6427   UCHAR                      ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32...
6428   UCHAR                      ucRow;             // Number of Row,in power of 2;
6429   UCHAR                      ucColumn;          // Number of Column,in power of 2;
6430   UCHAR                      ucBank;            // Nunber of Bank;
6431   UCHAR                      ucRank;            // Number of Rank, in power of 2
6432   UCHAR                      ucChannelNum;      // Number of channel;
6433   UCHAR                      ucChannelConfig;   // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2
6434   UCHAR                      ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
6435   UCHAR                      ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
6436   UCHAR                      ucRefreshRateFactor;
6437   UCHAR                      ucReserved[3];
6438 }ATOM_VRAM_MODULE_V2;
6439 
6440 
6441 typedef	struct _ATOM_MEMORY_TIMING_FORMAT
6442 {
6443 	ULONG											 ulClkRange;				// memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
6444   union{
6445 	  USHORT										 usMRS;							// mode register
6446     USHORT                     usDDR3_MR0;
6447   };
6448   union{
6449 	  USHORT										 usEMRS;						// extended mode register
6450     USHORT                     usDDR3_MR1;
6451   };
6452 	UCHAR											 ucCL;							// CAS latency
6453 	UCHAR											 ucWL;							// WRITE Latency
6454 	UCHAR											 uctRAS;						// tRAS
6455 	UCHAR											 uctRC;							// tRC
6456 	UCHAR											 uctRFC;						// tRFC
6457 	UCHAR											 uctRCDR;						// tRCDR
6458 	UCHAR											 uctRCDW;						// tRCDW
6459 	UCHAR											 uctRP;							// tRP
6460 	UCHAR											 uctRRD;						// tRRD
6461 	UCHAR											 uctWR;							// tWR
6462 	UCHAR											 uctWTR;						// tWTR
6463 	UCHAR											 uctPDIX;						// tPDIX
6464 	UCHAR											 uctFAW;						// tFAW
6465 	UCHAR											 uctAOND;						// tAOND
6466   union
6467   {
6468     struct {
6469 	    UCHAR											 ucflag;						// flag to control memory timing calculation. bit0= control EMRS2 Infineon
6470 	    UCHAR											 ucReserved;
6471     };
6472     USHORT                   usDDR3_MR2;
6473   };
6474 }ATOM_MEMORY_TIMING_FORMAT;
6475 
6476 
6477 typedef	struct _ATOM_MEMORY_TIMING_FORMAT_V1
6478 {
6479 	ULONG											 ulClkRange;				// memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
6480 	USHORT										 usMRS;							// mode register
6481 	USHORT										 usEMRS;						// extended mode register
6482 	UCHAR											 ucCL;							// CAS latency
6483 	UCHAR											 ucWL;							// WRITE Latency
6484 	UCHAR											 uctRAS;						// tRAS
6485 	UCHAR											 uctRC;							// tRC
6486 	UCHAR											 uctRFC;						// tRFC
6487 	UCHAR											 uctRCDR;						// tRCDR
6488 	UCHAR											 uctRCDW;						// tRCDW
6489 	UCHAR											 uctRP;							// tRP
6490 	UCHAR											 uctRRD;						// tRRD
6491 	UCHAR											 uctWR;							// tWR
6492 	UCHAR											 uctWTR;						// tWTR
6493 	UCHAR											 uctPDIX;						// tPDIX
6494 	UCHAR											 uctFAW;						// tFAW
6495 	UCHAR											 uctAOND;						// tAOND
6496 	UCHAR											 ucflag;						// flag to control memory timing calculation. bit0= control EMRS2 Infineon
6497 ////////////////////////////////////GDDR parameters///////////////////////////////////
6498 	UCHAR											 uctCCDL;						//
6499 	UCHAR											 uctCRCRL;						//
6500 	UCHAR											 uctCRCWL;						//
6501 	UCHAR											 uctCKE;						//
6502 	UCHAR											 uctCKRSE;						//
6503 	UCHAR											 uctCKRSX;						//
6504 	UCHAR											 uctFAW32;						//
6505 	UCHAR											 ucMR5lo;					//
6506 	UCHAR											 ucMR5hi;					//
6507 	UCHAR											 ucTerminator;
6508 }ATOM_MEMORY_TIMING_FORMAT_V1;
6509 
6510 typedef	struct _ATOM_MEMORY_TIMING_FORMAT_V2
6511 {
6512 	ULONG											 ulClkRange;				// memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
6513 	USHORT										 usMRS;							// mode register
6514 	USHORT										 usEMRS;						// extended mode register
6515 	UCHAR											 ucCL;							// CAS latency
6516 	UCHAR											 ucWL;							// WRITE Latency
6517 	UCHAR											 uctRAS;						// tRAS
6518 	UCHAR											 uctRC;							// tRC
6519 	UCHAR											 uctRFC;						// tRFC
6520 	UCHAR											 uctRCDR;						// tRCDR
6521 	UCHAR											 uctRCDW;						// tRCDW
6522 	UCHAR											 uctRP;							// tRP
6523 	UCHAR											 uctRRD;						// tRRD
6524 	UCHAR											 uctWR;							// tWR
6525 	UCHAR											 uctWTR;						// tWTR
6526 	UCHAR											 uctPDIX;						// tPDIX
6527 	UCHAR											 uctFAW;						// tFAW
6528 	UCHAR											 uctAOND;						// tAOND
6529 	UCHAR											 ucflag;						// flag to control memory timing calculation. bit0= control EMRS2 Infineon
6530 ////////////////////////////////////GDDR parameters///////////////////////////////////
6531 	UCHAR											 uctCCDL;						//
6532 	UCHAR											 uctCRCRL;						//
6533 	UCHAR											 uctCRCWL;						//
6534 	UCHAR											 uctCKE;						//
6535 	UCHAR											 uctCKRSE;						//
6536 	UCHAR											 uctCKRSX;						//
6537 	UCHAR											 uctFAW32;						//
6538 	UCHAR											 ucMR4lo;					//
6539 	UCHAR											 ucMR4hi;					//
6540 	UCHAR											 ucMR5lo;					//
6541 	UCHAR											 ucMR5hi;					//
6542 	UCHAR											 ucTerminator;
6543 	UCHAR											 ucReserved;
6544 }ATOM_MEMORY_TIMING_FORMAT_V2;
6545 
6546 typedef	struct _ATOM_MEMORY_FORMAT
6547 {
6548 	ULONG											 ulDllDisClock;			// memory DLL will be disable when target memory clock is below this clock
6549   union{
6550     USHORT                     usEMRS2Value;      // EMRS2 Value is used for GDDR2 and GDDR4 memory type
6551     USHORT                     usDDR3_Reserved;   // Not used for DDR3 memory
6552   };
6553   union{
6554     USHORT                     usEMRS3Value;      // EMRS3 Value is used for GDDR2 and GDDR4 memory type
6555     USHORT                     usDDR3_MR3;        // Used for DDR3 memory
6556   };
6557   UCHAR                      ucMemoryType;      // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now;
6558   UCHAR                      ucMemoryVenderID;  // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed
6559   UCHAR                      ucRow;             // Number of Row,in power of 2;
6560   UCHAR                      ucColumn;          // Number of Column,in power of 2;
6561   UCHAR                      ucBank;            // Nunber of Bank;
6562   UCHAR                      ucRank;            // Number of Rank, in power of 2
6563 	UCHAR											 ucBurstSize;				// burst size, 0= burst size=4  1= burst size=8
6564   UCHAR                      ucDllDisBit;				// position of DLL Enable/Disable bit in EMRS ( Extended Mode Register )
6565   UCHAR                      ucRefreshRateFactor;	// memory refresh rate in unit of ms
6566 	UCHAR											 ucDensity;					// _8Mx32, _16Mx32, _16Mx16, _32Mx16
6567 	UCHAR											 ucPreamble;				//[7:4] Write Preamble, [3:0] Read Preamble
6568   UCHAR											 ucMemAttrib;				// Memory Device Addribute, like RDBI/WDBI etc
6569 	ATOM_MEMORY_TIMING_FORMAT	 asMemTiming[5];		//Memory Timing block sort from lower clock to higher clock
6570 }ATOM_MEMORY_FORMAT;
6571 
6572 
6573 typedef struct _ATOM_VRAM_MODULE_V3
6574 {
6575 	ULONG											 ulChannelMapCfg;		// board dependent paramenter:Channel combination
6576 	USHORT										 usSize;						// size of ATOM_VRAM_MODULE_V3
6577   USHORT                     usDefaultMVDDQ;		// board dependent parameter:Default Memory Core Voltage
6578   USHORT                     usDefaultMVDDC;		// board dependent parameter:Default Memory IO Voltage
6579 	UCHAR                      ucExtMemoryID;     // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
6580   UCHAR                      ucChannelNum;      // board dependent parameter:Number of channel;
6581 	UCHAR											 ucChannelSize;			// board dependent parameter:32bit or 64bit
6582 	UCHAR											 ucVREFI;						// board dependnt parameter: EXT or INT +160mv to -140mv
6583 	UCHAR											 ucNPL_RT;					// board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
6584 	UCHAR											 ucFlag;						// To enable/disable functionalities based on memory type
6585 	ATOM_MEMORY_FORMAT				 asMemory;					// describ all of video memory parameters from memory spec
6586 }ATOM_VRAM_MODULE_V3;
6587 
6588 
6589 //ATOM_VRAM_MODULE_V3.ucNPL_RT
6590 #define NPL_RT_MASK															0x0f
6591 #define BATTERY_ODT_MASK												0xc0
6592 
6593 #define ATOM_VRAM_MODULE		 ATOM_VRAM_MODULE_V3
6594 
6595 typedef struct _ATOM_VRAM_MODULE_V4
6596 {
6597   ULONG	  ulChannelMapCfg;	                // board dependent parameter: Channel combination
6598   USHORT  usModuleSize;                     // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
6599   USHORT  usPrivateReserved;                // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
6600                                             // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
6601   USHORT  usReserved;
6602   UCHAR   ucExtMemoryID;    		            // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
6603   UCHAR   ucMemoryType;                     // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
6604   UCHAR   ucChannelNum;                     // Number of channels present in this module config
6605   UCHAR   ucChannelWidth;                   // 0 - 32 bits; 1 - 64 bits
6606 	UCHAR   ucDensity;                        // _8Mx32, _16Mx32, _16Mx16, _32Mx16
6607 	UCHAR	  ucFlag;						                // To enable/disable functionalities based on memory type
6608 	UCHAR	  ucMisc;						                // bit0: 0 - single rank; 1 - dual rank;   bit2: 0 - burstlength 4, 1 - burstlength 8
6609   UCHAR		ucVREFI;                          // board dependent parameter
6610   UCHAR   ucNPL_RT;                         // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
6611   UCHAR		ucPreamble;                       // [7:4] Write Preamble, [3:0] Read Preamble
6612   UCHAR   ucMemorySize;                     // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
6613                                             // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
6614   UCHAR   ucReserved[3];
6615 
6616 //compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
6617   union{
6618     USHORT	usEMRS2Value;                   // EMRS2 Value is used for GDDR2 and GDDR4 memory type
6619     USHORT  usDDR3_Reserved;
6620   };
6621   union{
6622     USHORT	usEMRS3Value;                   // EMRS3 Value is used for GDDR2 and GDDR4 memory type
6623     USHORT  usDDR3_MR3;                     // Used for DDR3 memory
6624   };
6625   UCHAR   ucMemoryVenderID;  		            // Predefined, If not predefined, vendor detection table gets executed
6626   UCHAR	  ucRefreshRateFactor;              // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
6627   UCHAR   ucReserved2[2];
6628   ATOM_MEMORY_TIMING_FORMAT  asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
6629 }ATOM_VRAM_MODULE_V4;
6630 
6631 #define VRAM_MODULE_V4_MISC_RANK_MASK       0x3
6632 #define VRAM_MODULE_V4_MISC_DUAL_RANK       0x1
6633 #define VRAM_MODULE_V4_MISC_BL_MASK         0x4
6634 #define VRAM_MODULE_V4_MISC_BL8             0x4
6635 #define VRAM_MODULE_V4_MISC_DUAL_CS         0x10
6636 
6637 typedef struct _ATOM_VRAM_MODULE_V5
6638 {
6639   ULONG	  ulChannelMapCfg;	                // board dependent parameter: Channel combination
6640   USHORT  usModuleSize;                     // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
6641   USHORT  usPrivateReserved;                // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
6642                                             // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
6643   USHORT  usReserved;
6644   UCHAR   ucExtMemoryID;    		            // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
6645   UCHAR   ucMemoryType;                     // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
6646   UCHAR   ucChannelNum;                     // Number of channels present in this module config
6647   UCHAR   ucChannelWidth;                   // 0 - 32 bits; 1 - 64 bits
6648 	UCHAR   ucDensity;                        // _8Mx32, _16Mx32, _16Mx16, _32Mx16
6649 	UCHAR	  ucFlag;						                // To enable/disable functionalities based on memory type
6650 	UCHAR	  ucMisc;						                // bit0: 0 - single rank; 1 - dual rank;   bit2: 0 - burstlength 4, 1 - burstlength 8
6651   UCHAR		ucVREFI;                          // board dependent parameter
6652   UCHAR   ucNPL_RT;                         // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
6653   UCHAR		ucPreamble;                       // [7:4] Write Preamble, [3:0] Read Preamble
6654   UCHAR   ucMemorySize;                     // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
6655                                             // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
6656   UCHAR   ucReserved[3];
6657 
6658 //compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
6659   USHORT	usEMRS2Value;      		            // EMRS2 Value is used for GDDR2 and GDDR4 memory type
6660   USHORT	usEMRS3Value;      		            // EMRS3 Value is used for GDDR2 and GDDR4 memory type
6661   UCHAR   ucMemoryVenderID;  		            // Predefined, If not predefined, vendor detection table gets executed
6662   UCHAR	  ucRefreshRateFactor;              // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
6663   UCHAR	  ucFIFODepth;			                // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth
6664   UCHAR   ucCDR_Bandwidth;		   // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
6665   ATOM_MEMORY_TIMING_FORMAT_V1  asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
6666 }ATOM_VRAM_MODULE_V5;
6667 
6668 typedef struct _ATOM_VRAM_MODULE_V6
6669 {
6670   ULONG	  ulChannelMapCfg;	                // board dependent parameter: Channel combination
6671   USHORT  usModuleSize;                     // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
6672   USHORT  usPrivateReserved;                // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
6673                                             // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
6674   USHORT  usReserved;
6675   UCHAR   ucExtMemoryID;    		            // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
6676   UCHAR   ucMemoryType;                     // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
6677   UCHAR   ucChannelNum;                     // Number of channels present in this module config
6678   UCHAR   ucChannelWidth;                   // 0 - 32 bits; 1 - 64 bits
6679 	UCHAR   ucDensity;                        // _8Mx32, _16Mx32, _16Mx16, _32Mx16
6680 	UCHAR	  ucFlag;						                // To enable/disable functionalities based on memory type
6681 	UCHAR	  ucMisc;						                // bit0: 0 - single rank; 1 - dual rank;   bit2: 0 - burstlength 4, 1 - burstlength 8
6682   UCHAR		ucVREFI;                          // board dependent parameter
6683   UCHAR   ucNPL_RT;                         // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
6684   UCHAR		ucPreamble;                       // [7:4] Write Preamble, [3:0] Read Preamble
6685   UCHAR   ucMemorySize;                     // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
6686                                             // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
6687   UCHAR   ucReserved[3];
6688 
6689 //compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
6690   USHORT	usEMRS2Value;      		            // EMRS2 Value is used for GDDR2 and GDDR4 memory type
6691   USHORT	usEMRS3Value;      		            // EMRS3 Value is used for GDDR2 and GDDR4 memory type
6692   UCHAR   ucMemoryVenderID;  		            // Predefined, If not predefined, vendor detection table gets executed
6693   UCHAR	  ucRefreshRateFactor;              // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
6694   UCHAR	  ucFIFODepth;			                // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth
6695   UCHAR   ucCDR_Bandwidth;		   // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
6696   ATOM_MEMORY_TIMING_FORMAT_V2  asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
6697 }ATOM_VRAM_MODULE_V6;
6698 
6699 typedef struct _ATOM_VRAM_MODULE_V7
6700 {
6701 // Design Specific Values
6702   ULONG	  ulChannelMapCfg;	                // mmMC_SHARED_CHREMAP
6703   USHORT  usModuleSize;                     // Size of ATOM_VRAM_MODULE_V7
6704   USHORT  usPrivateReserved;                // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
6705   USHORT  usEnableChannels;                 // bit vector which indicate which channels are enabled
6706   UCHAR   ucExtMemoryID;                    // Current memory module ID
6707   UCHAR   ucMemoryType;                     // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5
6708   UCHAR   ucChannelNum;                     // Number of mem. channels supported in this module
6709   UCHAR   ucChannelWidth;                   // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
6710   UCHAR   ucDensity;                        // _8Mx32, _16Mx32, _16Mx16, _32Mx16
6711   UCHAR	  ucReserve;                        // Former container for Mx_FLAGS like DBI_AC_MODE_ENABLE_ASIC for GDDR4. Not used now.
6712   UCHAR	  ucMisc;                           // RANK_OF_THISMEMORY etc.
6713   UCHAR	  ucVREFI;                          // Not used.
6714   UCHAR   ucNPL_RT;                         // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2.
6715   UCHAR	  ucPreamble;                       // [7:4] Write Preamble, [3:0] Read Preamble
6716   UCHAR   ucMemorySize;                     // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
6717   USHORT  usSEQSettingOffset;
6718   UCHAR   ucReserved;
6719 // Memory Module specific values
6720   USHORT  usEMRS2Value;                     // EMRS2/MR2 Value.
6721   USHORT  usEMRS3Value;                     // EMRS3/MR3 Value.
6722   UCHAR   ucMemoryVenderID;                 // [7:4] Revision, [3:0] Vendor code
6723   UCHAR	  ucRefreshRateFactor;              // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
6724   UCHAR	  ucFIFODepth;                      // FIFO depth can be detected during vendor detection, here is hardcoded per memory
6725   UCHAR   ucCDR_Bandwidth;                  // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
6726   char    strMemPNString[20];               // part number end with '0'.
6727 }ATOM_VRAM_MODULE_V7;
6728 
6729 typedef struct _ATOM_VRAM_INFO_V2
6730 {
6731   ATOM_COMMON_TABLE_HEADER   sHeader;
6732   UCHAR                      ucNumOfVRAMModule;
6733   ATOM_VRAM_MODULE           aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];      // just for allocation, real number of blocks is in ucNumOfVRAMModule;
6734 }ATOM_VRAM_INFO_V2;
6735 
6736 typedef struct _ATOM_VRAM_INFO_V3
6737 {
6738   ATOM_COMMON_TABLE_HEADER   sHeader;
6739 	USHORT										 usMemAdjustTblOffset;													 // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
6740 	USHORT										 usMemClkPatchTblOffset;												 //	offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
6741 	USHORT										 usRerseved;
6742 	UCHAR           	         aVID_PinsShift[9];															 // 8 bit strap maximum+terminator
6743   UCHAR                      ucNumOfVRAMModule;
6744   ATOM_VRAM_MODULE		       aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];      // just for allocation, real number of blocks is in ucNumOfVRAMModule;
6745 	ATOM_INIT_REG_BLOCK				 asMemPatch;																		 // for allocation
6746 																																						 //	ATOM_INIT_REG_BLOCK				 aMemAdjust;
6747 }ATOM_VRAM_INFO_V3;
6748 
6749 #define	ATOM_VRAM_INFO_LAST	     ATOM_VRAM_INFO_V3
6750 
6751 typedef struct _ATOM_VRAM_INFO_V4
6752 {
6753   ATOM_COMMON_TABLE_HEADER   sHeader;
6754   USHORT                     usMemAdjustTblOffset;													 // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
6755   USHORT                     usMemClkPatchTblOffset;												 //	offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
6756   USHORT										 usRerseved;
6757   UCHAR           	         ucMemDQ7_0ByteRemap;													   // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3
6758   ULONG                      ulMemDQ7_0BitRemap;                             // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21]
6759   UCHAR                      ucReservde[4];
6760   UCHAR                      ucNumOfVRAMModule;
6761   ATOM_VRAM_MODULE_V4		     aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];      // just for allocation, real number of blocks is in ucNumOfVRAMModule;
6762 	ATOM_INIT_REG_BLOCK				 asMemPatch;																		 // for allocation
6763 																																						 //	ATOM_INIT_REG_BLOCK				 aMemAdjust;
6764 }ATOM_VRAM_INFO_V4;
6765 
6766 typedef struct _ATOM_VRAM_INFO_HEADER_V2_1
6767 {
6768   ATOM_COMMON_TABLE_HEADER   sHeader;
6769   USHORT                     usMemAdjustTblOffset;													 // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
6770   USHORT                     usMemClkPatchTblOffset;												 //	offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
6771   USHORT                     usPerBytePresetOffset;                          // offset of ATOM_INIT_REG_BLOCK structure for Per Byte Offset Preset Settings
6772   USHORT                     usReserved[3];
6773   UCHAR                      ucNumOfVRAMModule;                              // indicate number of VRAM module
6774   UCHAR                      ucMemoryClkPatchTblVer;                         // version of memory AC timing register list
6775   UCHAR                      ucVramModuleVer;                                // indicate ATOM_VRAM_MODUE version
6776   UCHAR                      ucReserved;
6777   ATOM_VRAM_MODULE_V7		     aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];      // just for allocation, real number of blocks is in ucNumOfVRAMModule;
6778 }ATOM_VRAM_INFO_HEADER_V2_1;
6779 
6780 
6781 typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO
6782 {
6783   ATOM_COMMON_TABLE_HEADER   sHeader;
6784   UCHAR           	         aVID_PinsShift[9];   //8 bit strap maximum+terminator
6785 }ATOM_VRAM_GPIO_DETECTION_INFO;
6786 
6787 
6788 typedef struct _ATOM_MEMORY_TRAINING_INFO
6789 {
6790 	ATOM_COMMON_TABLE_HEADER   sHeader;
6791 	UCHAR											 ucTrainingLoop;
6792 	UCHAR											 ucReserved[3];
6793 	ATOM_INIT_REG_BLOCK				 asMemTrainingSetting;
6794 }ATOM_MEMORY_TRAINING_INFO;
6795 
6796 
6797 typedef struct SW_I2C_CNTL_DATA_PARAMETERS
6798 {
6799   UCHAR    ucControl;
6800   UCHAR    ucData;
6801   UCHAR    ucSatus;
6802   UCHAR    ucTemp;
6803 } SW_I2C_CNTL_DATA_PARAMETERS;
6804 
6805 #define SW_I2C_CNTL_DATA_PS_ALLOCATION  SW_I2C_CNTL_DATA_PARAMETERS
6806 
6807 typedef struct _SW_I2C_IO_DATA_PARAMETERS
6808 {
6809   USHORT   GPIO_Info;
6810   UCHAR    ucAct;
6811   UCHAR    ucData;
6812  } SW_I2C_IO_DATA_PARAMETERS;
6813 
6814 #define SW_I2C_IO_DATA_PS_ALLOCATION  SW_I2C_IO_DATA_PARAMETERS
6815 
6816 /****************************SW I2C CNTL DEFINITIONS**********************/
6817 #define SW_I2C_IO_RESET       0
6818 #define SW_I2C_IO_GET         1
6819 #define SW_I2C_IO_DRIVE       2
6820 #define SW_I2C_IO_SET         3
6821 #define SW_I2C_IO_START       4
6822 
6823 #define SW_I2C_IO_CLOCK       0
6824 #define SW_I2C_IO_DATA        0x80
6825 
6826 #define SW_I2C_IO_ZERO        0
6827 #define SW_I2C_IO_ONE         0x100
6828 
6829 #define SW_I2C_CNTL_READ      0
6830 #define SW_I2C_CNTL_WRITE     1
6831 #define SW_I2C_CNTL_START     2
6832 #define SW_I2C_CNTL_STOP      3
6833 #define SW_I2C_CNTL_OPEN      4
6834 #define SW_I2C_CNTL_CLOSE     5
6835 #define SW_I2C_CNTL_WRITE1BIT 6
6836 
6837 //==============================VESA definition Portion===============================
6838 #define VESA_OEM_PRODUCT_REV			            "01.00"
6839 #define VESA_MODE_ATTRIBUTE_MODE_SUPPORT	     0xBB	//refer to VBE spec p.32, no TTY support
6840 #define VESA_MODE_WIN_ATTRIBUTE						     7
6841 #define VESA_WIN_SIZE											     64
6842 
6843 typedef struct _PTR_32_BIT_STRUCTURE
6844 {
6845 	USHORT	Offset16;
6846 	USHORT	Segment16;
6847 } PTR_32_BIT_STRUCTURE;
6848 
6849 typedef union _PTR_32_BIT_UNION
6850 {
6851 	PTR_32_BIT_STRUCTURE	SegmentOffset;
6852 	ULONG					        Ptr32_Bit;
6853 } PTR_32_BIT_UNION;
6854 
6855 typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE
6856 {
6857 	UCHAR				      VbeSignature[4];
6858 	USHORT				    VbeVersion;
6859 	PTR_32_BIT_UNION	OemStringPtr;
6860 	UCHAR				      Capabilities[4];
6861 	PTR_32_BIT_UNION	VideoModePtr;
6862 	USHORT				    TotalMemory;
6863 } VBE_1_2_INFO_BLOCK_UPDATABLE;
6864 
6865 
6866 typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE
6867 {
6868 	VBE_1_2_INFO_BLOCK_UPDATABLE	CommonBlock;
6869 	USHORT							    OemSoftRev;
6870 	PTR_32_BIT_UNION				OemVendorNamePtr;
6871 	PTR_32_BIT_UNION				OemProductNamePtr;
6872 	PTR_32_BIT_UNION				OemProductRevPtr;
6873 } VBE_2_0_INFO_BLOCK_UPDATABLE;
6874 
6875 typedef union _VBE_VERSION_UNION
6876 {
6877 	VBE_2_0_INFO_BLOCK_UPDATABLE	VBE_2_0_InfoBlock;
6878 	VBE_1_2_INFO_BLOCK_UPDATABLE	VBE_1_2_InfoBlock;
6879 } VBE_VERSION_UNION;
6880 
6881 typedef struct _VBE_INFO_BLOCK
6882 {
6883 	VBE_VERSION_UNION			UpdatableVBE_Info;
6884 	UCHAR						      Reserved[222];
6885 	UCHAR						      OemData[256];
6886 } VBE_INFO_BLOCK;
6887 
6888 typedef struct _VBE_FP_INFO
6889 {
6890   USHORT	HSize;
6891 	USHORT	VSize;
6892 	USHORT	FPType;
6893 	UCHAR		RedBPP;
6894 	UCHAR		GreenBPP;
6895 	UCHAR		BlueBPP;
6896 	UCHAR		ReservedBPP;
6897 	ULONG		RsvdOffScrnMemSize;
6898 	ULONG		RsvdOffScrnMEmPtr;
6899 	UCHAR		Reserved[14];
6900 } VBE_FP_INFO;
6901 
6902 typedef struct _VESA_MODE_INFO_BLOCK
6903 {
6904 // Mandatory information for all VBE revisions
6905   USHORT    ModeAttributes;  //			dw	?	; mode attributes
6906 	UCHAR     WinAAttributes;  //			db	?	; window A attributes
6907 	UCHAR     WinBAttributes;  //			db	?	; window B attributes
6908 	USHORT    WinGranularity;  //			dw	?	; window granularity
6909 	USHORT    WinSize;         //			dw	?	; window size
6910 	USHORT    WinASegment;     //			dw	?	; window A start segment
6911 	USHORT    WinBSegment;     //			dw	?	; window B start segment
6912 	ULONG     WinFuncPtr;      //			dd	?	; real mode pointer to window function
6913 	USHORT    BytesPerScanLine;//			dw	?	; bytes per scan line
6914 
6915 //; Mandatory information for VBE 1.2 and above
6916   USHORT    XResolution;      //			dw	?	; horizontal resolution in pixels or characters
6917 	USHORT    YResolution;      //			dw	?	; vertical resolution in pixels or characters
6918 	UCHAR     XCharSize;        //			db	?	; character cell width in pixels
6919 	UCHAR     YCharSize;        //			db	?	; character cell height in pixels
6920 	UCHAR     NumberOfPlanes;   //			db	?	; number of memory planes
6921 	UCHAR     BitsPerPixel;     //			db	?	; bits per pixel
6922 	UCHAR     NumberOfBanks;    //			db	?	; number of banks
6923 	UCHAR     MemoryModel;      //			db	?	; memory model type
6924 	UCHAR     BankSize;         //			db	?	; bank size in KB
6925 	UCHAR     NumberOfImagePages;//		  db	?	; number of images
6926 	UCHAR     ReservedForPageFunction;//db	1	; reserved for page function
6927 
6928 //; Direct Color fields(required for direct/6 and YUV/7 memory models)
6929 	UCHAR			RedMaskSize;        //		db	?	; size of direct color red mask in bits
6930 	UCHAR			RedFieldPosition;   //		db	?	; bit position of lsb of red mask
6931 	UCHAR			GreenMaskSize;      //		db	?	; size of direct color green mask in bits
6932 	UCHAR			GreenFieldPosition; //		db	?	; bit position of lsb of green mask
6933 	UCHAR			BlueMaskSize;       //		db	?	; size of direct color blue mask in bits
6934 	UCHAR			BlueFieldPosition;  //		db	?	; bit position of lsb of blue mask
6935 	UCHAR			RsvdMaskSize;       //		db	?	; size of direct color reserved mask in bits
6936 	UCHAR			RsvdFieldPosition;  //		db	?	; bit position of lsb of reserved mask
6937 	UCHAR			DirectColorModeInfo;//		db	?	; direct color mode attributes
6938 
6939 //; Mandatory information for VBE 2.0 and above
6940 	ULONG			PhysBasePtr;        //		dd	?	; physical address for flat memory frame buffer
6941 	ULONG			Reserved_1;         //		dd	0	; reserved - always set to 0
6942 	USHORT		Reserved_2;         //	  dw	0	; reserved - always set to 0
6943 
6944 //; Mandatory information for VBE 3.0 and above
6945 	USHORT		LinBytesPerScanLine;  //	dw	?	; bytes per scan line for linear modes
6946 	UCHAR			BnkNumberOfImagePages;//	db	?	; number of images for banked modes
6947 	UCHAR			LinNumberOfImagPages; //	db	?	; number of images for linear modes
6948 	UCHAR			LinRedMaskSize;       //	db	?	; size of direct color red mask(linear modes)
6949 	UCHAR			LinRedFieldPosition;  //	db	?	; bit position of lsb of red mask(linear modes)
6950 	UCHAR			LinGreenMaskSize;     //	db	?	; size of direct color green mask(linear modes)
6951 	UCHAR			LinGreenFieldPosition;//	db	?	; bit position of lsb of green mask(linear modes)
6952 	UCHAR			LinBlueMaskSize;      //	db	?	; size of direct color blue mask(linear modes)
6953 	UCHAR			LinBlueFieldPosition; //	db	?	; bit position of lsb of blue mask(linear modes)
6954 	UCHAR			LinRsvdMaskSize;      //	db	?	; size of direct color reserved mask(linear modes)
6955 	UCHAR			LinRsvdFieldPosition; //	db	?	; bit position of lsb of reserved mask(linear modes)
6956 	ULONG			MaxPixelClock;        //	dd	?	; maximum pixel clock(in Hz) for graphics mode
6957 	UCHAR			Reserved;             //	db	190 dup (0)
6958 } VESA_MODE_INFO_BLOCK;
6959 
6960 // BIOS function CALLS
6961 #define ATOM_BIOS_EXTENDED_FUNCTION_CODE        0xA0	        // ATI Extended Function code
6962 #define ATOM_BIOS_FUNCTION_COP_MODE             0x00
6963 #define ATOM_BIOS_FUNCTION_SHORT_QUERY1         0x04
6964 #define ATOM_BIOS_FUNCTION_SHORT_QUERY2         0x05
6965 #define ATOM_BIOS_FUNCTION_SHORT_QUERY3         0x06
6966 #define ATOM_BIOS_FUNCTION_GET_DDC              0x0B
6967 #define ATOM_BIOS_FUNCTION_ASIC_DSTATE          0x0E
6968 #define ATOM_BIOS_FUNCTION_DEBUG_PLAY           0x0F
6969 #define ATOM_BIOS_FUNCTION_STV_STD              0x16
6970 #define ATOM_BIOS_FUNCTION_DEVICE_DET           0x17
6971 #define ATOM_BIOS_FUNCTION_DEVICE_SWITCH        0x18
6972 
6973 #define ATOM_BIOS_FUNCTION_PANEL_CONTROL        0x82
6974 #define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET       0x83
6975 #define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH    0x84
6976 #define ATOM_BIOS_FUNCTION_HW_ICON              0x8A
6977 #define ATOM_BIOS_FUNCTION_SET_CMOS             0x8B
6978 #define SUB_FUNCTION_UPDATE_DISPLAY_INFO        0x8000          // Sub function 80
6979 #define SUB_FUNCTION_UPDATE_EXPANSION_INFO      0x8100          // Sub function 80
6980 
6981 #define ATOM_BIOS_FUNCTION_DISPLAY_INFO         0x8D
6982 #define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF        0x8E
6983 #define ATOM_BIOS_FUNCTION_VIDEO_STATE          0x8F
6984 #define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE    0x0300          // Sub function 03
6985 #define ATOM_SUB_FUNCTION_GET_LIDSTATE          0x0700          // Sub function 7
6986 #define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE  0x1400          // Notify caller the current thermal state
6987 #define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300          // Notify caller the current critical state
6988 #define ATOM_SUB_FUNCTION_SET_LIDSTATE          0x8500          // Sub function 85
6989 #define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900// Sub function 89
6990 #define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT    0x9400          // Notify caller that ADC is supported
6991 
6992 
6993 #define ATOM_BIOS_FUNCTION_VESA_DPMS            0x4F10          // Set DPMS
6994 #define ATOM_SUB_FUNCTION_SET_DPMS              0x0001          // BL: Sub function 01
6995 #define ATOM_SUB_FUNCTION_GET_DPMS              0x0002          // BL: Sub function 02
6996 #define ATOM_PARAMETER_VESA_DPMS_ON             0x0000          // BH Parameter for DPMS ON.
6997 #define ATOM_PARAMETER_VESA_DPMS_STANDBY        0x0100          // BH Parameter for DPMS STANDBY
6998 #define ATOM_PARAMETER_VESA_DPMS_SUSPEND        0x0200          // BH Parameter for DPMS SUSPEND
6999 #define ATOM_PARAMETER_VESA_DPMS_OFF            0x0400          // BH Parameter for DPMS OFF
7000 #define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON      0x0800          // BH Parameter for DPMS REDUCE ON (NOT SUPPORTED)
7001 
7002 #define ATOM_BIOS_RETURN_CODE_MASK              0x0000FF00L
7003 #define ATOM_BIOS_REG_HIGH_MASK                 0x0000FF00L
7004 #define ATOM_BIOS_REG_LOW_MASK                  0x000000FFL
7005 
7006 // structure used for VBIOS only
7007 
7008 //DispOutInfoTable
7009 typedef struct _ASIC_TRANSMITTER_INFO
7010 {
7011 	USHORT usTransmitterObjId;
7012 	USHORT usSupportDevice;
7013   UCHAR  ucTransmitterCmdTblId;
7014 	UCHAR  ucConfig;
7015 	UCHAR  ucEncoderID;					 //available 1st encoder ( default )
7016 	UCHAR  ucOptionEncoderID;    //available 2nd encoder ( optional )
7017 	UCHAR  uc2ndEncoderID;
7018 	UCHAR  ucReserved;
7019 }ASIC_TRANSMITTER_INFO;
7020 
7021 #define ASIC_TRANSMITTER_INFO_CONFIG__DVO_SDR_MODE          0x01
7022 #define ASIC_TRANSMITTER_INFO_CONFIG__COHERENT_MODE         0x02
7023 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODEROBJ_ID_MASK    0xc4
7024 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_A             0x00
7025 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_B             0x04
7026 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_C             0x40
7027 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_D             0x44
7028 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_E             0x80
7029 #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_F             0x84
7030 
7031 typedef struct _ASIC_ENCODER_INFO
7032 {
7033 	UCHAR ucEncoderID;
7034 	UCHAR ucEncoderConfig;
7035   USHORT usEncoderCmdTblId;
7036 }ASIC_ENCODER_INFO;
7037 
7038 typedef struct _ATOM_DISP_OUT_INFO
7039 {
7040   ATOM_COMMON_TABLE_HEADER sHeader;
7041 	USHORT ptrTransmitterInfo;
7042 	USHORT ptrEncoderInfo;
7043 	ASIC_TRANSMITTER_INFO  asTransmitterInfo[1];
7044 	ASIC_ENCODER_INFO      asEncoderInfo[1];
7045 }ATOM_DISP_OUT_INFO;
7046 
7047 typedef struct _ATOM_DISP_OUT_INFO_V2
7048 {
7049   ATOM_COMMON_TABLE_HEADER sHeader;
7050 	USHORT ptrTransmitterInfo;
7051 	USHORT ptrEncoderInfo;
7052   USHORT ptrMainCallParserFar;                  // direct address of main parser call in VBIOS binary.
7053 	ASIC_TRANSMITTER_INFO  asTransmitterInfo[1];
7054 	ASIC_ENCODER_INFO      asEncoderInfo[1];
7055 }ATOM_DISP_OUT_INFO_V2;
7056 
7057 
7058 typedef struct _ATOM_DISP_CLOCK_ID {
7059   UCHAR ucPpllId;
7060   UCHAR ucPpllAttribute;
7061 }ATOM_DISP_CLOCK_ID;
7062 
7063 // ucPpllAttribute
7064 #define CLOCK_SOURCE_SHAREABLE            0x01
7065 #define CLOCK_SOURCE_DP_MODE              0x02
7066 #define CLOCK_SOURCE_NONE_DP_MODE         0x04
7067 
7068 //DispOutInfoTable
7069 typedef struct _ASIC_TRANSMITTER_INFO_V2
7070 {
7071 	USHORT usTransmitterObjId;
7072 	USHORT usDispClkIdOffset;    // point to clock source id list supported by Encoder Object
7073   UCHAR  ucTransmitterCmdTblId;
7074 	UCHAR  ucConfig;
7075 	UCHAR  ucEncoderID;					 // available 1st encoder ( default )
7076 	UCHAR  ucOptionEncoderID;    // available 2nd encoder ( optional )
7077 	UCHAR  uc2ndEncoderID;
7078 	UCHAR  ucReserved;
7079 }ASIC_TRANSMITTER_INFO_V2;
7080 
7081 typedef struct _ATOM_DISP_OUT_INFO_V3
7082 {
7083   ATOM_COMMON_TABLE_HEADER sHeader;
7084 	USHORT ptrTransmitterInfo;
7085 	USHORT ptrEncoderInfo;
7086   USHORT ptrMainCallParserFar;                  // direct address of main parser call in VBIOS binary.
7087   USHORT usReserved;
7088   UCHAR  ucDCERevision;
7089   UCHAR  ucMaxDispEngineNum;
7090   UCHAR  ucMaxActiveDispEngineNum;
7091   UCHAR  ucMaxPPLLNum;
7092   UCHAR  ucCoreRefClkSource;                    // value of CORE_REF_CLK_SOURCE
7093   UCHAR  ucDispCaps;
7094   UCHAR  ucReserved[2];
7095   ASIC_TRANSMITTER_INFO_V2  asTransmitterInfo[1];     // for alligment only
7096 }ATOM_DISP_OUT_INFO_V3;
7097 
7098 //ucDispCaps
7099 #define DISPLAY_CAPS__DP_PCLK_FROM_PPLL        0x01
7100 #define DISPLAY_CAPS__FORCE_DISPDEV_CONNECTED  0x02
7101 
7102 typedef enum CORE_REF_CLK_SOURCE{
7103   CLOCK_SRC_XTALIN=0,
7104   CLOCK_SRC_XO_IN=1,
7105   CLOCK_SRC_XO_IN2=2,
7106 }CORE_REF_CLK_SOURCE;
7107 
7108 // DispDevicePriorityInfo
7109 typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO
7110 {
7111   ATOM_COMMON_TABLE_HEADER sHeader;
7112 	USHORT asDevicePriority[16];
7113 }ATOM_DISPLAY_DEVICE_PRIORITY_INFO;
7114 
7115 //ProcessAuxChannelTransactionTable
7116 typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
7117 {
7118 	USHORT	lpAuxRequest;
7119 	USHORT  lpDataOut;
7120 	UCHAR		ucChannelID;
7121 	union
7122 	{
7123   UCHAR   ucReplyStatus;
7124 	UCHAR   ucDelay;
7125 	};
7126   UCHAR   ucDataOutLen;
7127 	UCHAR   ucReserved;
7128 }PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS;
7129 
7130 //ProcessAuxChannelTransactionTable
7131 typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2
7132 {
7133 	USHORT	lpAuxRequest;
7134 	USHORT  lpDataOut;
7135 	UCHAR		ucChannelID;
7136 	union
7137 	{
7138   UCHAR   ucReplyStatus;
7139 	UCHAR   ucDelay;
7140 	};
7141   UCHAR   ucDataOutLen;
7142 	UCHAR   ucHPD_ID;                                       //=0: HPD1, =1: HPD2, =2: HPD3, =3: HPD4, =4: HPD5, =5: HPD6
7143 }PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2;
7144 
7145 #define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION			PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
7146 
7147 //GetSinkType
7148 
7149 typedef struct _DP_ENCODER_SERVICE_PARAMETERS
7150 {
7151 	USHORT ucLinkClock;
7152 	union
7153 	{
7154 	UCHAR ucConfig;				// for DP training command
7155 	UCHAR ucI2cId;				// use for GET_SINK_TYPE command
7156 	};
7157 	UCHAR ucAction;
7158 	UCHAR ucStatus;
7159 	UCHAR ucLaneNum;
7160 	UCHAR ucReserved[2];
7161 }DP_ENCODER_SERVICE_PARAMETERS;
7162 
7163 // ucAction
7164 #define ATOM_DP_ACTION_GET_SINK_TYPE							0x01
7165 /* obsolete */
7166 #define ATOM_DP_ACTION_TRAINING_START							0x02
7167 #define ATOM_DP_ACTION_TRAINING_COMPLETE					0x03
7168 #define ATOM_DP_ACTION_TRAINING_PATTERN_SEL				0x04
7169 #define ATOM_DP_ACTION_SET_VSWING_PREEMP					0x05
7170 #define ATOM_DP_ACTION_GET_VSWING_PREEMP					0x06
7171 #define ATOM_DP_ACTION_BLANKING                   0x07
7172 
7173 // ucConfig
7174 #define ATOM_DP_CONFIG_ENCODER_SEL_MASK						0x03
7175 #define ATOM_DP_CONFIG_DIG1_ENCODER								0x00
7176 #define ATOM_DP_CONFIG_DIG2_ENCODER								0x01
7177 #define ATOM_DP_CONFIG_EXTERNAL_ENCODER						0x02
7178 #define ATOM_DP_CONFIG_LINK_SEL_MASK							0x04
7179 #define ATOM_DP_CONFIG_LINK_A											0x00
7180 #define ATOM_DP_CONFIG_LINK_B											0x04
7181 /* /obselete */
7182 #define DP_ENCODER_SERVICE_PS_ALLOCATION				WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
7183 
7184 
7185 typedef struct _DP_ENCODER_SERVICE_PARAMETERS_V2
7186 {
7187 	USHORT usExtEncoderObjId;   // External Encoder Object Id, output parameter only, use when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION
7188   UCHAR  ucAuxId;
7189   UCHAR  ucAction;
7190   UCHAR  ucSinkType;          // Iput and Output parameters.
7191   UCHAR  ucHPDId;             // Input parameter, used when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION
7192 	UCHAR  ucReserved[2];
7193 }DP_ENCODER_SERVICE_PARAMETERS_V2;
7194 
7195 typedef struct _DP_ENCODER_SERVICE_PS_ALLOCATION_V2
7196 {
7197   DP_ENCODER_SERVICE_PARAMETERS_V2 asDPServiceParam;
7198   PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2 asAuxParam;
7199 }DP_ENCODER_SERVICE_PS_ALLOCATION_V2;
7200 
7201 // ucAction
7202 #define DP_SERVICE_V2_ACTION_GET_SINK_TYPE							0x01
7203 #define DP_SERVICE_V2_ACTION_DET_LCD_CONNECTION			    0x02
7204 
7205 
7206 // DP_TRAINING_TABLE
7207 #define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR				ATOM_DP_TRAINING_TBL_ADDR
7208 #define DPCD_SET_SS_CNTL_TBL_ADDR													(ATOM_DP_TRAINING_TBL_ADDR + 8 )
7209 #define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR							(ATOM_DP_TRAINING_TBL_ADDR + 16 )
7210 #define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR								(ATOM_DP_TRAINING_TBL_ADDR + 24 )
7211 #define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR								(ATOM_DP_TRAINING_TBL_ADDR + 32)
7212 #define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR							(ATOM_DP_TRAINING_TBL_ADDR + 40)
7213 #define	DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR							(ATOM_DP_TRAINING_TBL_ADDR + 48)
7214 #define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR								(ATOM_DP_TRAINING_TBL_ADDR + 60)
7215 #define DP_I2C_AUX_DDC_WRITE_TBL_ADDR											(ATOM_DP_TRAINING_TBL_ADDR + 64)
7216 #define DP_I2C_AUX_DDC_READ_START_TBL_ADDR								(ATOM_DP_TRAINING_TBL_ADDR + 72)
7217 #define DP_I2C_AUX_DDC_READ_TBL_ADDR											(ATOM_DP_TRAINING_TBL_ADDR + 76)
7218 #define DP_I2C_AUX_DDC_WRITE_END_TBL_ADDR                 (ATOM_DP_TRAINING_TBL_ADDR + 80)
7219 #define DP_I2C_AUX_DDC_READ_END_TBL_ADDR									(ATOM_DP_TRAINING_TBL_ADDR + 84)
7220 
7221 typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
7222 {
7223 	UCHAR   ucI2CSpeed;
7224  	union
7225 	{
7226    UCHAR ucRegIndex;
7227    UCHAR ucStatus;
7228 	};
7229 	USHORT  lpI2CDataOut;
7230   UCHAR   ucFlag;
7231   UCHAR   ucTransBytes;
7232   UCHAR   ucSlaveAddr;
7233   UCHAR   ucLineNumber;
7234 }PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS;
7235 
7236 #define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION       PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
7237 
7238 //ucFlag
7239 #define HW_I2C_WRITE        1
7240 #define HW_I2C_READ         0
7241 #define I2C_2BYTE_ADDR      0x02
7242 
7243 /****************************************************************************/
7244 // Structures used by HW_Misc_OperationTable
7245 /****************************************************************************/
7246 typedef struct  _ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1
7247 {
7248   UCHAR  ucCmd;                //  Input: To tell which action to take
7249   UCHAR  ucReserved[3];
7250   ULONG  ulReserved;
7251 }ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1;
7252 
7253 typedef struct  _ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1
7254 {
7255   UCHAR  ucReturnCode;        // Output: Return value base on action was taken
7256   UCHAR  ucReserved[3];
7257   ULONG  ulReserved;
7258 }ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1;
7259 
7260 // Actions code
7261 #define  ATOM_GET_SDI_SUPPORT              0xF0
7262 
7263 // Return code
7264 #define  ATOM_UNKNOWN_CMD                   0
7265 #define  ATOM_FEATURE_NOT_SUPPORTED         1
7266 #define  ATOM_FEATURE_SUPPORTED             2
7267 
7268 typedef struct _ATOM_HW_MISC_OPERATION_PS_ALLOCATION
7269 {
7270 	ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1        sInput_Output;
7271 	PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS         sReserved;
7272 }ATOM_HW_MISC_OPERATION_PS_ALLOCATION;
7273 
7274 /****************************************************************************/
7275 
7276 typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2
7277 {
7278    UCHAR ucHWBlkInst;                // HW block instance, 0, 1, 2, ...
7279    UCHAR ucReserved[3];
7280 }SET_HWBLOCK_INSTANCE_PARAMETER_V2;
7281 
7282 #define HWBLKINST_INSTANCE_MASK       0x07
7283 #define HWBLKINST_HWBLK_MASK          0xF0
7284 #define HWBLKINST_HWBLK_SHIFT         0x04
7285 
7286 //ucHWBlock
7287 #define SELECT_DISP_ENGINE            0
7288 #define SELECT_DISP_PLL               1
7289 #define SELECT_DCIO_UNIPHY_LINK0      2
7290 #define SELECT_DCIO_UNIPHY_LINK1      3
7291 #define SELECT_DCIO_IMPCAL            4
7292 #define SELECT_DCIO_DIG               6
7293 #define SELECT_CRTC_PIXEL_RATE        7
7294 #define SELECT_VGA_BLK                8
7295 
7296 // DIGTransmitterInfoTable structure used to program UNIPHY settings
7297 typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_1{
7298   ATOM_COMMON_TABLE_HEADER sHeader;
7299   USHORT usDPVsPreEmphSettingOffset;     // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock
7300   USHORT usPhyAnalogRegListOffset;       // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info
7301   USHORT usPhyAnalogSettingOffset;       // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range
7302   USHORT usPhyPllRegListOffset;          // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info
7303   USHORT usPhyPllSettingOffset;          // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
7304 }DIG_TRANSMITTER_INFO_HEADER_V3_1;
7305 
7306 typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_2{
7307   ATOM_COMMON_TABLE_HEADER sHeader;
7308   USHORT usDPVsPreEmphSettingOffset;     // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock
7309   USHORT usPhyAnalogRegListOffset;       // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info
7310   USHORT usPhyAnalogSettingOffset;       // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range
7311   USHORT usPhyPllRegListOffset;          // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info
7312   USHORT usPhyPllSettingOffset;          // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
7313   USHORT usDPSSRegListOffset;            // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy SS Pll register Info
7314   USHORT usDPSSSettingOffset;            // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy SS Pll Settings
7315 }DIG_TRANSMITTER_INFO_HEADER_V3_2;
7316 
7317 typedef struct _CLOCK_CONDITION_REGESTER_INFO{
7318   USHORT usRegisterIndex;
7319   UCHAR  ucStartBit;
7320   UCHAR  ucEndBit;
7321 }CLOCK_CONDITION_REGESTER_INFO;
7322 
7323 typedef struct _CLOCK_CONDITION_SETTING_ENTRY{
7324   USHORT usMaxClockFreq;
7325   UCHAR  ucEncodeMode;
7326   UCHAR  ucPhySel;
7327   ULONG  ulAnalogSetting[1];
7328 }CLOCK_CONDITION_SETTING_ENTRY;
7329 
7330 typedef struct _CLOCK_CONDITION_SETTING_INFO{
7331   USHORT usEntrySize;
7332   CLOCK_CONDITION_SETTING_ENTRY asClkCondSettingEntry[1];
7333 }CLOCK_CONDITION_SETTING_INFO;
7334 
7335 typedef struct _PHY_CONDITION_REG_VAL{
7336   ULONG  ulCondition;
7337   ULONG  ulRegVal;
7338 }PHY_CONDITION_REG_VAL;
7339 
7340 typedef struct _PHY_CONDITION_REG_VAL_V2{
7341   ULONG  ulCondition;
7342   UCHAR  ucCondition2;
7343   ULONG  ulRegVal;
7344 }PHY_CONDITION_REG_VAL_V2;
7345 
7346 typedef struct _PHY_CONDITION_REG_INFO{
7347   USHORT usRegIndex;
7348   USHORT usSize;
7349   PHY_CONDITION_REG_VAL asRegVal[1];
7350 }PHY_CONDITION_REG_INFO;
7351 
7352 typedef struct _PHY_CONDITION_REG_INFO_V2{
7353   USHORT usRegIndex;
7354   USHORT usSize;
7355   PHY_CONDITION_REG_VAL_V2 asRegVal[1];
7356 }PHY_CONDITION_REG_INFO_V2;
7357 
7358 typedef struct _PHY_ANALOG_SETTING_INFO{
7359   UCHAR  ucEncodeMode;
7360   UCHAR  ucPhySel;
7361   USHORT usSize;
7362   PHY_CONDITION_REG_INFO  asAnalogSetting[1];
7363 }PHY_ANALOG_SETTING_INFO;
7364 
7365 typedef struct _PHY_ANALOG_SETTING_INFO_V2{
7366   UCHAR  ucEncodeMode;
7367   UCHAR  ucPhySel;
7368   USHORT usSize;
7369   PHY_CONDITION_REG_INFO_V2  asAnalogSetting[1];
7370 }PHY_ANALOG_SETTING_INFO_V2;
7371 
7372 typedef struct _GFX_HAVESTING_PARAMETERS {
7373   UCHAR ucGfxBlkId;                        //GFX blk id to be harvested, like CU, RB or PRIM
7374   UCHAR ucReserved;                        //reserved
7375   UCHAR ucActiveUnitNumPerSH;              //requested active CU/RB/PRIM number per shader array
7376   UCHAR ucMaxUnitNumPerSH;                 //max CU/RB/PRIM number per shader array
7377 } GFX_HAVESTING_PARAMETERS;
7378 
7379 //ucGfxBlkId
7380 #define GFX_HARVESTING_CU_ID               0
7381 #define GFX_HARVESTING_RB_ID               1
7382 #define GFX_HARVESTING_PRIM_ID             2
7383 
7384 /****************************************************************************/
7385 //Portion VI: Definitinos for vbios MC scratch registers that driver used
7386 /****************************************************************************/
7387 
7388 #define MC_MISC0__MEMORY_TYPE_MASK    0xF0000000
7389 #define MC_MISC0__MEMORY_TYPE__GDDR1  0x10000000
7390 #define MC_MISC0__MEMORY_TYPE__DDR2   0x20000000
7391 #define MC_MISC0__MEMORY_TYPE__GDDR3  0x30000000
7392 #define MC_MISC0__MEMORY_TYPE__GDDR4  0x40000000
7393 #define MC_MISC0__MEMORY_TYPE__GDDR5  0x50000000
7394 #define MC_MISC0__MEMORY_TYPE__HBM    0x60000000
7395 #define MC_MISC0__MEMORY_TYPE__DDR3   0xB0000000
7396 
7397 #define ATOM_MEM_TYPE_DDR_STRING      "DDR"
7398 #define ATOM_MEM_TYPE_DDR2_STRING     "DDR2"
7399 #define ATOM_MEM_TYPE_GDDR3_STRING    "GDDR3"
7400 #define ATOM_MEM_TYPE_GDDR4_STRING    "GDDR4"
7401 #define ATOM_MEM_TYPE_GDDR5_STRING    "GDDR5"
7402 #define ATOM_MEM_TYPE_HBM_STRING      "HBM"
7403 #define ATOM_MEM_TYPE_DDR3_STRING     "DDR3"
7404 
7405 /****************************************************************************/
7406 //Portion VI: Definitinos being oboselete
7407 /****************************************************************************/
7408 
7409 //==========================================================================================
7410 //Remove the definitions below when driver is ready!
7411 typedef struct _ATOM_DAC_INFO
7412 {
7413   ATOM_COMMON_TABLE_HEADER sHeader;
7414   USHORT                   usMaxFrequency;      // in 10kHz unit
7415   USHORT                   usReserved;
7416 }ATOM_DAC_INFO;
7417 
7418 
7419 typedef struct  _COMPASSIONATE_DATA
7420 {
7421   ATOM_COMMON_TABLE_HEADER sHeader;
7422 
7423   //==============================  DAC1 portion
7424   UCHAR   ucDAC1_BG_Adjustment;
7425   UCHAR   ucDAC1_DAC_Adjustment;
7426   USHORT  usDAC1_FORCE_Data;
7427   //==============================  DAC2 portion
7428   UCHAR   ucDAC2_CRT2_BG_Adjustment;
7429   UCHAR   ucDAC2_CRT2_DAC_Adjustment;
7430   USHORT  usDAC2_CRT2_FORCE_Data;
7431   USHORT  usDAC2_CRT2_MUX_RegisterIndex;
7432   UCHAR   ucDAC2_CRT2_MUX_RegisterInfo;     //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
7433   UCHAR   ucDAC2_NTSC_BG_Adjustment;
7434   UCHAR   ucDAC2_NTSC_DAC_Adjustment;
7435   USHORT  usDAC2_TV1_FORCE_Data;
7436   USHORT  usDAC2_TV1_MUX_RegisterIndex;
7437   UCHAR   ucDAC2_TV1_MUX_RegisterInfo;      //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
7438   UCHAR   ucDAC2_CV_BG_Adjustment;
7439   UCHAR   ucDAC2_CV_DAC_Adjustment;
7440   USHORT  usDAC2_CV_FORCE_Data;
7441   USHORT  usDAC2_CV_MUX_RegisterIndex;
7442   UCHAR   ucDAC2_CV_MUX_RegisterInfo;       //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
7443   UCHAR   ucDAC2_PAL_BG_Adjustment;
7444   UCHAR   ucDAC2_PAL_DAC_Adjustment;
7445   USHORT  usDAC2_TV2_FORCE_Data;
7446 }COMPASSIONATE_DATA;
7447 
7448 /****************************Supported Device Info Table Definitions**********************/
7449 //  ucConnectInfo:
7450 //    [7:4] - connector type
7451 //      = 1   - VGA connector
7452 //      = 2   - DVI-I
7453 //      = 3   - DVI-D
7454 //      = 4   - DVI-A
7455 //      = 5   - SVIDEO
7456 //      = 6   - COMPOSITE
7457 //      = 7   - LVDS
7458 //      = 8   - DIGITAL LINK
7459 //      = 9   - SCART
7460 //      = 0xA - HDMI_type A
7461 //      = 0xB - HDMI_type B
7462 //      = 0xE - Special case1 (DVI+DIN)
7463 //      Others=TBD
7464 //    [3:0] - DAC Associated
7465 //      = 0   - no DAC
7466 //      = 1   - DACA
7467 //      = 2   - DACB
7468 //      = 3   - External DAC
7469 //      Others=TBD
7470 //
7471 
7472 typedef struct _ATOM_CONNECTOR_INFO
7473 {
7474 #if ATOM_BIG_ENDIAN
7475   UCHAR   bfConnectorType:4;
7476   UCHAR   bfAssociatedDAC:4;
7477 #else
7478   UCHAR   bfAssociatedDAC:4;
7479   UCHAR   bfConnectorType:4;
7480 #endif
7481 }ATOM_CONNECTOR_INFO;
7482 
7483 typedef union _ATOM_CONNECTOR_INFO_ACCESS
7484 {
7485   ATOM_CONNECTOR_INFO sbfAccess;
7486   UCHAR               ucAccess;
7487 }ATOM_CONNECTOR_INFO_ACCESS;
7488 
7489 typedef struct _ATOM_CONNECTOR_INFO_I2C
7490 {
7491   ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo;
7492   ATOM_I2C_ID_CONFIG_ACCESS  sucI2cId;
7493 }ATOM_CONNECTOR_INFO_I2C;
7494 
7495 
7496 typedef struct _ATOM_SUPPORTED_DEVICES_INFO
7497 {
7498   ATOM_COMMON_TABLE_HEADER	sHeader;
7499   USHORT                    usDeviceSupport;
7500   ATOM_CONNECTOR_INFO_I2C   asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO];
7501 }ATOM_SUPPORTED_DEVICES_INFO;
7502 
7503 #define NO_INT_SRC_MAPPED       0xFF
7504 
7505 typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP
7506 {
7507   UCHAR   ucIntSrcBitmap;
7508 }ATOM_CONNECTOR_INC_SRC_BITMAP;
7509 
7510 typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2
7511 {
7512   ATOM_COMMON_TABLE_HEADER      sHeader;
7513   USHORT                        usDeviceSupport;
7514   ATOM_CONNECTOR_INFO_I2C       asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
7515   ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
7516 }ATOM_SUPPORTED_DEVICES_INFO_2;
7517 
7518 typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1
7519 {
7520   ATOM_COMMON_TABLE_HEADER      sHeader;
7521   USHORT                        usDeviceSupport;
7522   ATOM_CONNECTOR_INFO_I2C       asConnInfo[ATOM_MAX_SUPPORTED_DEVICE];
7523   ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE];
7524 }ATOM_SUPPORTED_DEVICES_INFO_2d1;
7525 
7526 #define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1
7527 
7528 
7529 
7530 typedef struct _ATOM_MISC_CONTROL_INFO
7531 {
7532    USHORT usFrequency;
7533    UCHAR  ucPLL_ChargePump;				                // PLL charge-pump gain control
7534    UCHAR  ucPLL_DutyCycle;				                // PLL duty cycle control
7535    UCHAR  ucPLL_VCO_Gain;				                  // PLL VCO gain control
7536    UCHAR  ucPLL_VoltageSwing;			                // PLL driver voltage swing control
7537 }ATOM_MISC_CONTROL_INFO;
7538 
7539 
7540 #define ATOM_MAX_MISC_INFO       4
7541 
7542 typedef struct _ATOM_TMDS_INFO
7543 {
7544   ATOM_COMMON_TABLE_HEADER sHeader;
7545   USHORT							usMaxFrequency;             // in 10Khz
7546   ATOM_MISC_CONTROL_INFO				asMiscInfo[ATOM_MAX_MISC_INFO];
7547 }ATOM_TMDS_INFO;
7548 
7549 
7550 typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE
7551 {
7552   UCHAR ucTVStandard;     //Same as TV standards defined above,
7553   UCHAR ucPadding[1];
7554 }ATOM_ENCODER_ANALOG_ATTRIBUTE;
7555 
7556 typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE
7557 {
7558   UCHAR ucAttribute;      //Same as other digital encoder attributes defined above
7559   UCHAR ucPadding[1];
7560 }ATOM_ENCODER_DIGITAL_ATTRIBUTE;
7561 
7562 typedef union _ATOM_ENCODER_ATTRIBUTE
7563 {
7564   ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib;
7565   ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib;
7566 }ATOM_ENCODER_ATTRIBUTE;
7567 
7568 
7569 typedef struct _DVO_ENCODER_CONTROL_PARAMETERS
7570 {
7571   USHORT usPixelClock;
7572   USHORT usEncoderID;
7573   UCHAR  ucDeviceType;												//Use ATOM_DEVICE_xxx1_Index to indicate device type only.
7574   UCHAR  ucAction;														//ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
7575   ATOM_ENCODER_ATTRIBUTE usDevAttr;
7576 }DVO_ENCODER_CONTROL_PARAMETERS;
7577 
7578 typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION
7579 {
7580   DVO_ENCODER_CONTROL_PARAMETERS    sDVOEncoder;
7581   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION      sReserved;     //Caller doesn't need to init this portion
7582 }DVO_ENCODER_CONTROL_PS_ALLOCATION;
7583 
7584 
7585 #define ATOM_XTMDS_ASIC_SI164_ID        1
7586 #define ATOM_XTMDS_ASIC_SI178_ID        2
7587 #define ATOM_XTMDS_ASIC_TFP513_ID       3
7588 #define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001
7589 #define ATOM_XTMDS_SUPPORTED_DUALLINK   0x00000002
7590 #define ATOM_XTMDS_MVPU_FPGA            0x00000004
7591 
7592 
7593 typedef struct _ATOM_XTMDS_INFO
7594 {
7595   ATOM_COMMON_TABLE_HEADER   sHeader;
7596   USHORT                     usSingleLinkMaxFrequency;
7597   ATOM_I2C_ID_CONFIG_ACCESS  sucI2cId;           //Point the ID on which I2C is used to control external chip
7598   UCHAR                      ucXtransimitterID;
7599   UCHAR                      ucSupportedLink;    // Bit field, bit0=1, single link supported;bit1=1,dual link supported
7600   UCHAR                      ucSequnceAlterID;   // Even with the same external TMDS asic, it's possible that the program seqence alters
7601                                                  // due to design. This ID is used to alert driver that the sequence is not "standard"!
7602   UCHAR                      ucMasterAddress;    // Address to control Master xTMDS Chip
7603   UCHAR                      ucSlaveAddress;     // Address to control Slave xTMDS Chip
7604 }ATOM_XTMDS_INFO;
7605 
7606 typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS
7607 {
7608   UCHAR ucEnable;                     // ATOM_ENABLE=On or ATOM_DISABLE=Off
7609   UCHAR ucDevice;                     // ATOM_DEVICE_DFP1_INDEX....
7610   UCHAR ucPadding[2];
7611 }DFP_DPMS_STATUS_CHANGE_PARAMETERS;
7612 
7613 /****************************Legacy Power Play Table Definitions **********************/
7614 
7615 //Definitions for ulPowerPlayMiscInfo
7616 #define ATOM_PM_MISCINFO_SPLIT_CLOCK                     0x00000000L
7617 #define ATOM_PM_MISCINFO_USING_MCLK_SRC                  0x00000001L
7618 #define ATOM_PM_MISCINFO_USING_SCLK_SRC                  0x00000002L
7619 
7620 #define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT            0x00000004L
7621 #define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH        0x00000008L
7622 
7623 #define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN             0x00000010L
7624 
7625 #define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN          0x00000020L
7626 #define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN          0x00000040L
7627 #define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE                 0x00000080L  //When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program
7628 
7629 #define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN      0x00000100L
7630 #define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN         0x00000200L
7631 #define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN              0x00000400L
7632 #define ATOM_PM_MISCINFO_LOAD_BALANCE_EN                 0x00000800L
7633 #define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE     0x00001000L
7634 #define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L
7635 #define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE            0x00004000L
7636 
7637 #define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE             0x00008000L
7638 #define ATOM_PM_MISCINFO_OVER_CLOCK_MODE                 0x00010000L
7639 #define ATOM_PM_MISCINFO_OVER_DRIVE_MODE                 0x00020000L
7640 #define ATOM_PM_MISCINFO_POWER_SAVING_MODE               0x00040000L
7641 #define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE              0x00080000L
7642 
7643 #define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK           0x00300000L  //0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved
7644 #define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT          20
7645 
7646 #define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE                 0x00400000L
7647 #define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2      0x00800000L
7648 #define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4      0x01000000L
7649 #define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN            0x02000000L  //When set, Dynamic
7650 #define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN        0x04000000L  //When set, Dynamic
7651 #define ATOM_PM_MISCINFO_3D_ACCELERATION_EN              0x08000000L  //When set, This mode is for acceleated 3D mode
7652 
7653 #define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK   0x70000000L  //1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks)
7654 #define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT  28
7655 #define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS                0x80000000L
7656 
7657 #define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE            0x00000001L
7658 #define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT          0x00000002L
7659 #define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN           0x00000004L
7660 #define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO            0x00000008L
7661 #define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE              0x00000010L
7662 #define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN       0x00000020L
7663 #define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE         0x00000040L  //If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption.
7664                                                                       //If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback
7665 #define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC                0x00000080L
7666 #define ATOM_PM_MISCINFO2_STUTTER_MODE_EN                0x00000100L
7667 #define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE               0x00000200L
7668 
7669 //ucTableFormatRevision=1
7670 //ucTableContentRevision=1
7671 typedef struct  _ATOM_POWERMODE_INFO
7672 {
7673   ULONG     ulMiscInfo;                 //The power level should be arranged in ascending order
7674   ULONG     ulReserved1;                // must set to 0
7675   ULONG     ulReserved2;                // must set to 0
7676   USHORT    usEngineClock;
7677   USHORT    usMemoryClock;
7678   UCHAR     ucVoltageDropIndex;         // index to GPIO table
7679   UCHAR     ucSelectedPanel_RefreshRate;// panel refresh rate
7680   UCHAR     ucMinTemperature;
7681   UCHAR     ucMaxTemperature;
7682   UCHAR     ucNumPciELanes;             // number of PCIE lanes
7683 }ATOM_POWERMODE_INFO;
7684 
7685 //ucTableFormatRevision=2
7686 //ucTableContentRevision=1
7687 typedef struct  _ATOM_POWERMODE_INFO_V2
7688 {
7689   ULONG     ulMiscInfo;                 //The power level should be arranged in ascending order
7690   ULONG     ulMiscInfo2;
7691   ULONG     ulEngineClock;
7692   ULONG     ulMemoryClock;
7693   UCHAR     ucVoltageDropIndex;         // index to GPIO table
7694   UCHAR     ucSelectedPanel_RefreshRate;// panel refresh rate
7695   UCHAR     ucMinTemperature;
7696   UCHAR     ucMaxTemperature;
7697   UCHAR     ucNumPciELanes;             // number of PCIE lanes
7698 }ATOM_POWERMODE_INFO_V2;
7699 
7700 //ucTableFormatRevision=2
7701 //ucTableContentRevision=2
7702 typedef struct  _ATOM_POWERMODE_INFO_V3
7703 {
7704   ULONG     ulMiscInfo;                 //The power level should be arranged in ascending order
7705   ULONG     ulMiscInfo2;
7706   ULONG     ulEngineClock;
7707   ULONG     ulMemoryClock;
7708   UCHAR     ucVoltageDropIndex;         // index to Core (VDDC) votage table
7709   UCHAR     ucSelectedPanel_RefreshRate;// panel refresh rate
7710   UCHAR     ucMinTemperature;
7711   UCHAR     ucMaxTemperature;
7712   UCHAR     ucNumPciELanes;             // number of PCIE lanes
7713   UCHAR     ucVDDCI_VoltageDropIndex;   // index to VDDCI votage table
7714 }ATOM_POWERMODE_INFO_V3;
7715 
7716 
7717 #define ATOM_MAX_NUMBEROF_POWER_BLOCK  8
7718 
7719 #define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN            0x01
7720 #define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE         0x02
7721 
7722 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63      0x01
7723 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032   0x02
7724 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030   0x03
7725 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649   0x04
7726 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64      0x05
7727 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375    0x06
7728 #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512   0x07	// Andigilog
7729 
7730 
7731 typedef struct  _ATOM_POWERPLAY_INFO
7732 {
7733   ATOM_COMMON_TABLE_HEADER	sHeader;
7734   UCHAR    ucOverdriveThermalController;
7735   UCHAR    ucOverdriveI2cLine;
7736   UCHAR    ucOverdriveIntBitmap;
7737   UCHAR    ucOverdriveControllerAddress;
7738   UCHAR    ucSizeOfPowerModeEntry;
7739   UCHAR    ucNumOfPowerModeEntries;
7740   ATOM_POWERMODE_INFO asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
7741 }ATOM_POWERPLAY_INFO;
7742 
7743 typedef struct  _ATOM_POWERPLAY_INFO_V2
7744 {
7745   ATOM_COMMON_TABLE_HEADER	sHeader;
7746   UCHAR    ucOverdriveThermalController;
7747   UCHAR    ucOverdriveI2cLine;
7748   UCHAR    ucOverdriveIntBitmap;
7749   UCHAR    ucOverdriveControllerAddress;
7750   UCHAR    ucSizeOfPowerModeEntry;
7751   UCHAR    ucNumOfPowerModeEntries;
7752   ATOM_POWERMODE_INFO_V2 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
7753 }ATOM_POWERPLAY_INFO_V2;
7754 
7755 typedef struct  _ATOM_POWERPLAY_INFO_V3
7756 {
7757   ATOM_COMMON_TABLE_HEADER	sHeader;
7758   UCHAR    ucOverdriveThermalController;
7759   UCHAR    ucOverdriveI2cLine;
7760   UCHAR    ucOverdriveIntBitmap;
7761   UCHAR    ucOverdriveControllerAddress;
7762   UCHAR    ucSizeOfPowerModeEntry;
7763   UCHAR    ucNumOfPowerModeEntries;
7764   ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
7765 }ATOM_POWERPLAY_INFO_V3;
7766 
7767 
7768 // Following definitions are for compatibility issue in different SW components.
7769 #define ATOM_MASTER_DATA_TABLE_REVISION   0x01
7770 #define Object_Info												Object_Header
7771 #define	AdjustARB_SEQ											MC_InitParameter
7772 #define	VRAM_GPIO_DetectionInfo						VoltageObjectInfo
7773 #define	ASIC_VDDCI_Info                   ASIC_ProfilingInfo
7774 #define ASIC_MVDDQ_Info										MemoryTrainingInfo
7775 #define SS_Info                           PPLL_SS_Info
7776 #define ASIC_MVDDC_Info                   ASIC_InternalSS_Info
7777 #define DispDevicePriorityInfo						SaveRestoreInfo
7778 #define DispOutInfo												TV_VideoMode
7779 
7780 
7781 #define ATOM_ENCODER_OBJECT_TABLE         ATOM_OBJECT_TABLE
7782 #define ATOM_CONNECTOR_OBJECT_TABLE       ATOM_OBJECT_TABLE
7783 
7784 //New device naming, remove them when both DAL/VBIOS is ready
7785 #define DFP2I_OUTPUT_CONTROL_PARAMETERS    CRT1_OUTPUT_CONTROL_PARAMETERS
7786 #define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS
7787 
7788 #define DFP1X_OUTPUT_CONTROL_PARAMETERS    CRT1_OUTPUT_CONTROL_PARAMETERS
7789 #define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS
7790 
7791 #define DFP1I_OUTPUT_CONTROL_PARAMETERS    DFP1_OUTPUT_CONTROL_PARAMETERS
7792 #define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION
7793 
7794 #define ATOM_DEVICE_DFP1I_SUPPORT          ATOM_DEVICE_DFP1_SUPPORT
7795 #define ATOM_DEVICE_DFP1X_SUPPORT          ATOM_DEVICE_DFP2_SUPPORT
7796 
7797 #define ATOM_DEVICE_DFP1I_INDEX            ATOM_DEVICE_DFP1_INDEX
7798 #define ATOM_DEVICE_DFP1X_INDEX            ATOM_DEVICE_DFP2_INDEX
7799 
7800 #define ATOM_DEVICE_DFP2I_INDEX            0x00000009
7801 #define ATOM_DEVICE_DFP2I_SUPPORT          (0x1L << ATOM_DEVICE_DFP2I_INDEX)
7802 
7803 #define ATOM_S0_DFP1I                      ATOM_S0_DFP1
7804 #define ATOM_S0_DFP1X                      ATOM_S0_DFP2
7805 
7806 #define ATOM_S0_DFP2I                      0x00200000L
7807 #define ATOM_S0_DFP2Ib2                    0x20
7808 
7809 #define ATOM_S2_DFP1I_DPMS_STATE           ATOM_S2_DFP1_DPMS_STATE
7810 #define ATOM_S2_DFP1X_DPMS_STATE           ATOM_S2_DFP2_DPMS_STATE
7811 
7812 #define ATOM_S2_DFP2I_DPMS_STATE           0x02000000L
7813 #define ATOM_S2_DFP2I_DPMS_STATEb3         0x02
7814 
7815 #define ATOM_S3_DFP2I_ACTIVEb1             0x02
7816 
7817 #define ATOM_S3_DFP1I_ACTIVE               ATOM_S3_DFP1_ACTIVE
7818 #define ATOM_S3_DFP1X_ACTIVE               ATOM_S3_DFP2_ACTIVE
7819 
7820 #define ATOM_S3_DFP2I_ACTIVE               0x00000200L
7821 
7822 #define ATOM_S3_DFP1I_CRTC_ACTIVE          ATOM_S3_DFP1_CRTC_ACTIVE
7823 #define ATOM_S3_DFP1X_CRTC_ACTIVE          ATOM_S3_DFP2_CRTC_ACTIVE
7824 #define ATOM_S3_DFP2I_CRTC_ACTIVE          0x02000000L
7825 
7826 #define ATOM_S3_DFP2I_CRTC_ACTIVEb3        0x02
7827 #define ATOM_S5_DOS_REQ_DFP2Ib1            0x02
7828 
7829 #define ATOM_S5_DOS_REQ_DFP2I              0x0200
7830 #define ATOM_S6_ACC_REQ_DFP1I              ATOM_S6_ACC_REQ_DFP1
7831 #define ATOM_S6_ACC_REQ_DFP1X              ATOM_S6_ACC_REQ_DFP2
7832 
7833 #define ATOM_S6_ACC_REQ_DFP2Ib3            0x02
7834 #define ATOM_S6_ACC_REQ_DFP2I              0x02000000L
7835 
7836 #define TMDS1XEncoderControl               DVOEncoderControl
7837 #define DFP1XOutputControl                 DVOOutputControl
7838 
7839 #define ExternalDFPOutputControl           DFP1XOutputControl
7840 #define EnableExternalTMDS_Encoder         TMDS1XEncoderControl
7841 
7842 #define DFP1IOutputControl                 TMDSAOutputControl
7843 #define DFP2IOutputControl                 LVTMAOutputControl
7844 
7845 #define DAC1_ENCODER_CONTROL_PARAMETERS    DAC_ENCODER_CONTROL_PARAMETERS
7846 #define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
7847 
7848 #define DAC2_ENCODER_CONTROL_PARAMETERS    DAC_ENCODER_CONTROL_PARAMETERS
7849 #define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
7850 
7851 #define ucDac1Standard  ucDacStandard
7852 #define ucDac2Standard  ucDacStandard
7853 
7854 #define TMDS1EncoderControl TMDSAEncoderControl
7855 #define TMDS2EncoderControl LVTMAEncoderControl
7856 
7857 #define DFP1OutputControl   TMDSAOutputControl
7858 #define DFP2OutputControl   LVTMAOutputControl
7859 #define CRT1OutputControl   DAC1OutputControl
7860 #define CRT2OutputControl   DAC2OutputControl
7861 
7862 //These two lines will be removed for sure in a few days, will follow up with Michael V.
7863 #define EnableLVDS_SS   EnableSpreadSpectrumOnPPLL
7864 #define ENABLE_LVDS_SS_PARAMETERS_V3  ENABLE_SPREAD_SPECTRUM_ON_PPLL
7865 
7866 //#define ATOM_S2_CRT1_DPMS_STATE         0x00010000L
7867 //#define ATOM_S2_LCD1_DPMS_STATE	        ATOM_S2_CRT1_DPMS_STATE
7868 //#define ATOM_S2_TV1_DPMS_STATE          ATOM_S2_CRT1_DPMS_STATE
7869 //#define ATOM_S2_DFP1_DPMS_STATE         ATOM_S2_CRT1_DPMS_STATE
7870 //#define ATOM_S2_CRT2_DPMS_STATE         ATOM_S2_CRT1_DPMS_STATE
7871 
7872 #define ATOM_S6_ACC_REQ_TV2             0x00400000L
7873 #define ATOM_DEVICE_TV2_INDEX           0x00000006
7874 #define ATOM_DEVICE_TV2_SUPPORT         (0x1L << ATOM_DEVICE_TV2_INDEX)
7875 #define ATOM_S0_TV2                     0x00100000L
7876 #define ATOM_S3_TV2_ACTIVE              ATOM_S3_DFP6_ACTIVE
7877 #define ATOM_S3_TV2_CRTC_ACTIVE         ATOM_S3_DFP6_CRTC_ACTIVE
7878 
7879 //
7880 #define ATOM_S2_CRT1_DPMS_STATE         0x00010000L
7881 #define ATOM_S2_LCD1_DPMS_STATE	        0x00020000L
7882 #define ATOM_S2_TV1_DPMS_STATE          0x00040000L
7883 #define ATOM_S2_DFP1_DPMS_STATE         0x00080000L
7884 #define ATOM_S2_CRT2_DPMS_STATE         0x00100000L
7885 #define ATOM_S2_LCD2_DPMS_STATE         0x00200000L
7886 #define ATOM_S2_TV2_DPMS_STATE          0x00400000L
7887 #define ATOM_S2_DFP2_DPMS_STATE         0x00800000L
7888 #define ATOM_S2_CV_DPMS_STATE           0x01000000L
7889 #define ATOM_S2_DFP3_DPMS_STATE					0x02000000L
7890 #define ATOM_S2_DFP4_DPMS_STATE					0x04000000L
7891 #define ATOM_S2_DFP5_DPMS_STATE					0x08000000L
7892 
7893 #define ATOM_S2_CRT1_DPMS_STATEb2       0x01
7894 #define ATOM_S2_LCD1_DPMS_STATEb2       0x02
7895 #define ATOM_S2_TV1_DPMS_STATEb2        0x04
7896 #define ATOM_S2_DFP1_DPMS_STATEb2       0x08
7897 #define ATOM_S2_CRT2_DPMS_STATEb2       0x10
7898 #define ATOM_S2_LCD2_DPMS_STATEb2       0x20
7899 #define ATOM_S2_TV2_DPMS_STATEb2        0x40
7900 #define ATOM_S2_DFP2_DPMS_STATEb2       0x80
7901 #define ATOM_S2_CV_DPMS_STATEb3         0x01
7902 #define ATOM_S2_DFP3_DPMS_STATEb3				0x02
7903 #define ATOM_S2_DFP4_DPMS_STATEb3				0x04
7904 #define ATOM_S2_DFP5_DPMS_STATEb3				0x08
7905 
7906 #define ATOM_S3_ASIC_GUI_ENGINE_HUNGb3	0x20
7907 #define ATOM_S3_ALLOW_FAST_PWR_SWITCHb3 0x40
7908 #define ATOM_S3_RQST_GPU_USE_MIN_PWRb3  0x80
7909 
7910 /*********************************************************************************/
7911 
7912 #pragma pack() // BIOS data must use byte alignment
7913 
7914 //
7915 // AMD ACPI Table
7916 //
7917 #pragma pack(1)
7918 
7919 typedef struct {
7920   ULONG Signature;
7921   ULONG TableLength;      //Length
7922   UCHAR Revision;
7923   UCHAR Checksum;
7924   UCHAR OemId[6];
7925   UCHAR OemTableId[8];    //UINT64  OemTableId;
7926   ULONG OemRevision;
7927   ULONG CreatorId;
7928   ULONG CreatorRevision;
7929 } AMD_ACPI_DESCRIPTION_HEADER;
7930 /*
7931 //EFI_ACPI_DESCRIPTION_HEADER from AcpiCommon.h
7932 typedef struct {
7933   UINT32  Signature;       //0x0
7934   UINT32  Length;          //0x4
7935   UINT8   Revision;        //0x8
7936   UINT8   Checksum;        //0x9
7937   UINT8   OemId[6];        //0xA
7938   UINT64  OemTableId;      //0x10
7939   UINT32  OemRevision;     //0x18
7940   UINT32  CreatorId;       //0x1C
7941   UINT32  CreatorRevision; //0x20
7942 }EFI_ACPI_DESCRIPTION_HEADER;
7943 */
7944 typedef struct {
7945   AMD_ACPI_DESCRIPTION_HEADER SHeader;
7946   UCHAR TableUUID[16];    //0x24
7947   ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the structure.
7948   ULONG Lib1ImageOffset;  //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the structure.
7949   ULONG Reserved[4];      //0x3C
7950 }UEFI_ACPI_VFCT;
7951 
7952 typedef struct {
7953   ULONG  PCIBus;          //0x4C
7954   ULONG  PCIDevice;       //0x50
7955   ULONG  PCIFunction;     //0x54
7956   USHORT VendorID;        //0x58
7957   USHORT DeviceID;        //0x5A
7958   USHORT SSVID;           //0x5C
7959   USHORT SSID;            //0x5E
7960   ULONG  Revision;        //0x60
7961   ULONG  ImageLength;     //0x64
7962 }VFCT_IMAGE_HEADER;
7963 
7964 
7965 typedef struct {
7966   VFCT_IMAGE_HEADER	VbiosHeader;
7967   UCHAR	VbiosContent[];
7968 }GOP_VBIOS_CONTENT;
7969 
7970 typedef struct {
7971   VFCT_IMAGE_HEADER	Lib1Header;
7972   UCHAR	Lib1Content[1];
7973 }GOP_LIB1_CONTENT;
7974 
7975 #pragma pack()
7976 
7977 
7978 #endif /* _ATOMBIOS_H */
7979 
7980 #include "pptable.h"
7981 
7982