Home
last modified time | relevance | path

Searched refs:ADC (Results 1 – 25 of 314) sorted by relevance

12345678910>>...13

/linux-6.6.21/drivers/iio/adc/ !
DKconfig3 # ADC drivers
25 tristate "Analog Device AD4130 ADC Driver"
34 to digital converters (ADC).
40 tristate "Analog Devices AD7091R5 ADC Driver"
44 Say yes here to build support for Analog Devices AD7091R-5 ADC.
52 SPI analog to digital converters (ADC).
58 tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver"
63 AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC).
70 tristate "Analog Devices AD7265/AD7266 ADC driver"
94 tristate "Analog Devices AD7291 ADC driver"
[all …]
/linux-6.6.21/Documentation/hwmon/ !
Dda9055.rst16 The DA9055 provides an Analogue to Digital Converter (ADC) with 10 bits
20 the input of the ADC during the conversion.
22 The ADC is used to measure the following inputs:
37 are stored in a 10 bit ADC.
41 Milli volt = ((ADC value * 1000) / 85) + 2500
43 The voltages on ADC channels 1, 2 and 3 are calculated as:
45 Milli volt = (ADC value * 1000) / 102
50 Temperatures are sampled by a 10 bit ADC. Junction temperatures
51 are monitored by the ADC channels.
Dda9052.rst17 The DA9052/53 provides an Analogue to Digital Converter (ADC) with 10 bits
21 the input of the ADC during the conversion.
23 The ADC is used to measure the following inputs:
46 Voltages are sampled by a 10 bit ADC.
50 Milli volt = ((ADC value * 1000) / 512) + 2500
54 Milli volt = (ADC value * 2500) / 512;
56 The voltages on ADC channels 4, 5 and 6 are calculated as:
58 Milli volt = (ADC value * 2500) / 1023
63 Temperatures are sampled by a 10 bit ADC. Junction and battery temperatures
64 are monitored by the ADC channels.
/linux-6.6.21/Documentation/ABI/testing/ !
Dsysfs-bus-iio-adc-mt63605 Indicated MT6360 USBID ADC which connected to connector ID pin.
12 Indicated MT6360 VBUS ADC with lower accuracy(+-75mA)
20 Indicated MT6360 VBUS ADC with higher accuracy(+-30mA)
28 Indicated MT6360 VSYS ADC
35 Indicated MT6360 VBAT ADC
42 Indicated MT6360 IBUS ADC
49 Indicated MT6360 IBAT ADC
56 Indicated MT6360 CHG_VDDP ADC
70 Indicated MT6360 VREF_TS ADC
77 Indicated MT6360 TS ADC
/linux-6.6.21/Documentation/devicetree/bindings/iio/adc/ !
Dti,am3359-adc.yaml7 title: TI AM3359 ADC
27 description: List of analog inputs available for ADC. AIN0 = 0, AIN1 = 1 and
34 description: List of open delays for each channel of ADC in the order of
35 ti,adc-channels. The value corresponds to the number of ADC clock cycles
37 the start of ADC conversion. Maximum value is 0x3FFFF.
43 description: List of sample delays for each channel of ADC in the order of
44 ti,adc-channels. The value corresponds to the number of ADC clock cycles
51 description: Number of averages to be performed for each channel of ADC. If
54 ADC to generate a sample. Maximum value is 16.
Dadi,axi-adc.yaml7 title: Analog Devices AXI ADC IP core
13 Analog Devices Generic AXI ADC IP core for interfacing an ADC device
17 interface for the actual ADC, while this IP core will interface
18 to the data-lines of the ADC and handle the streaming of data into
41 A reference to a the actual ADC to which this FPGA ADC interfaces to.
Dst,stmpe-adc.yaml7 title: ADC on an STMPE multifunction device.
13 This ADC forms part of an ST microelectronics STMPE multifunction device .
14 The ADC is shared with the STMPE touchscreen. As a result some ADC related
25 Bitmask specifying which ADC channels should _not_ be
40 st,norequest-mask = <0x0f>; /* dont use ADC CH3-0 */
Dst,stm32-adc.yaml7 title: STMicroelectronics STM32 ADC
10 STM32 ADC is a successive approximation analog-to-digital converter.
12 in single, continuous, scan or discontinuous mode. Result of the ADC is
19 Each STM32 ADC block can have up to 3 ADC instances.
37 One or more interrupts for ADC block, depending on part used:
38 - stm32f4 and stm32h7 share a common ADC interrupt line.
39 - stm32mp1 has two separate interrupt lines, one for each ADC within
40 ADC block.
41 - stm32mp13 has an interrupt line per ADC block.
71 Phandle to the embedded booster regulator that can be used to supply ADC
[all …]
Dqcom,spmi-vadc.yaml7 title: Qualcomm's SPMI PMIC ADC
14 SPMI PMIC voltage ADC (VADC) provides interface to clients to read
15 voltage. The VADC is a 15-bit sigma-delta ADC.
16 SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read
17 voltage. The VADC is a 16-bit sigma-delta ADC.
61 Represents the external channels which are connected to the ADC.
72 ADC channel number.
74 For PMIC7 ADC, the channel numbers are specified separately per PMIC
80 ADC input of the platform as seen in the schematics.
88 This parameter is used to decrease ADC sampling rate.
[all …]
Dnuvoton,npcm750-adc.yaml7 title: Nuvoton NPCM BMC Analog to Digital Converter (ADC)
13 The NPCM7XX ADC is a 10-bit converter and NPCM8XX ADC is a 12-bit converter,
27 description: ADC interrupt, should be set for falling edge.
34 description: If not provided the defulat ADC sample rate will be used.
Dx-powers,axp209-adc.yaml7 title: X-Powers AXP ADC
13 ADC is frequently used as a provider to consumers of the ADC channels.
15 ADC channels and their indexes per variant:
Dfsl,imx25-gcq.yaml7 title: Freescale ADC GCQ device
11 analog inputs using the ADC unit of the i.MX25.
28 The regulator supplying the ADC reference voltage.
33 The regulator supplying the ADC reference voltage on pin XP.
38 The regulator supplying the ADC reference voltage on pin YP.
Dadi,ad7291.yaml7 title: AD7291 8-Channel, I2C, 12-Bit SAR ADC with Temperature Sensor
13 Analog Devices AD7291 8-Channel I2C 12-Bit SAR ADC with Temperature Sensor
26 The regulator supply for ADC reference voltage.
Dmarvell,berlin2-adc.yaml7 title: Berlin 2 Analog to Digital Converter (ADC)
13 The Berlin ADC has 8 channels, with one connected to a temperature sensor.
14 It is part of the system controller register set. The ADC node should be a
Dnxp,imx93-adc.yaml7 title: NXP iMX93 ADC
13 The ADC on iMX93 is a 8-channel 12-bit 1MS/s ADC with 4 channels
16 enables for each channel Also this ADC contain alternate analog
Dingenic,adc.yaml8 title: Ingenic JZ47xx ADC controller IIO
14 Industrial I/O subsystem bindings for ADC controller found in
17 ADC clients must use the format described in
19 giving a phandle and IIO specifier pair ("io-channels") to the ADC controller.
/linux-6.6.21/Documentation/devicetree/bindings/thermal/ !
Dgeneric-adc-thermal.yaml7 title: General Purpose Analog To Digital Converter (ADC) based thermal sensor
14 one of ADC channel and sensor resistance is read via voltage across the
33 Lookup table to map the relation between ADC value and temperature.
34 When ADC is read, the value is looked up on the table to get the
37 If not specified, driver assumes the ADC channel gives milliCelsius
43 - description: ADC read value
Dqcom-spmi-adc-tm-hc.yaml7 title: Qualcomm's SPMI PMIC ADC HC Thermal Monitoring
46 description: This parameter is used to decrease ADC sampling rate.
62 description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
68 From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
80 description: Time between AMUX getting configured and the ADC starting conversion.
90 signal is scaled down to 1/3 of its value before ADC measurement. If
/linux-6.6.21/Documentation/devicetree/bindings/sound/ !
Dtlv320aic31xx.txt14 "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
15 "ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)
51 * MIC1LP, devices with ADC
52 * MIC1RP, devices with ADC
53 * MIC1LM, devices with ADC
54 * AIN1, devices without ADC
55 * AIN2, devices without ADC
/linux-6.6.21/Documentation/devicetree/bindings/power/supply/ !
Ddlg,da9150-charger.yaml21 - description: ADC channel for current
22 - description: ADC channel for bus voltage
23 - description: ADC channel for junction temperature
24 - description: ADC channel for battery voltage
Dnokia,n900-battery.yaml22 - description: ADC channel for temperature reading
23 - description: ADC channel for battery size identification
24 - description: ADC channel to measure the battery voltage
/linux-6.6.21/Documentation/devicetree/bindings/mfd/ !
Dgateworks-gsc.yaml17 - Hardware monitor with ADC's for temperature and voltage rails and
67 Properties for a single ADC which can report cooked values
73 description: Register of the ADC
77 description: Name of the ADC input
92 description: Values of resistors for divider on raw ADC input
100 A positive voltage offset to apply to a raw ADC
173 channel@2 { /* A1: Input Voltage (raw ADC) */
/linux-6.6.21/drivers/staging/iio/adc/ !
DKconfig3 # ADC drivers
8 tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver"
13 temperature sensors and ADC.
/linux-6.6.21/Documentation/devicetree/bindings/hwmon/ !
Diio-hwmon.yaml7 title: ADC-attached Hardware Sensor
13 Bindings for hardware monitoring devices connected to ADC controllers
24 List of phandles to ADC channels to read the monitoring values
/linux-6.6.21/Documentation/iio/ !
Dep93xx_adc.rst2 Cirrus Logic EP93xx ADC driver
9 5-channel ADC and high-end (EP9307, EP9312, EP9315) devices with 10-channel
10 touchscreen/ADC module.

12345678910>>...13