/linux-6.1.9/arch/arm64/boot/dts/freescale/ |
D | imx8qxp-colibri.dtsi | 132 IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05 0x21 199 IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21 /* SODIMM 32 */ 200 IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x21 /* SODIMM 34 */ 207 IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x21 /* SODIMM 55 */ 208 IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21 /* SODIMM 63 */ 215 IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX 0x21 /* SODIMM 35 */ 216 IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX 0x21 /* SODIMM 33 */ 347 IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x21 /* SODIMM 86 */ 454 IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0 0x21 483 IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 [all …]
|
/linux-6.1.9/tools/testing/selftests/arm64/fp/ |
D | sve-test.S | 451 mov x21, #0 // Set up Z-regs & shadow with test pattern 453 mov x1, x21 456 add x21, x21, #1 457 cmp x21, #NZR 466 mov x1, x21 469 add x21, x21, #1 470 cmp x21, #NZR + NPR 477 mov x21, #0 478 0: mov x0, x21 480 add x21, x21, #1 [all …]
|
D | fpsimd-test.S | 276 mov x21, #0 // Set up V-regs & shadow with test pattern 278 mov x1, x21 281 add x21, x21, #1 282 cmp x21, #NVR 289 mov x21, #0 290 0: mov x0, x21 292 add x21, x21, #1 293 cmp x21, #NVR 318 mov x0, x21
|
D | za-test.S | 299 sub x1, x21, #1 302 subs x21, x21, #1 316 0: sub x0, x24, x21 318 subs x21, x21, #1 349 mov x0, x21
|
/linux-6.1.9/tools/testing/selftests/arm64/signal/ |
D | signals.S | 20 mov x21, x1 24 add x0, x21, x22 31 mov x1, x21 38 mov x2, x21
|
/linux-6.1.9/lib/crypto/ |
D | curve25519-fiat32.c | 120 { u32 x20; u8/*bool*/ x21 = subborrow_u26(0x0, x2, 0x3ffffed, &x20); in fe_freeze() local 121 { u32 x23; u8/*bool*/ x24 = subborrow_u25(x21, x4, 0x1ffffff, &x23); in fe_freeze() 229 { const u32 x21 = in1[8]; in fe_add_impl() local 256 out[8] = (x21 + x39); in fe_add_impl() 272 { const u32 x21 = in1[8]; in fe_sub_impl() local 299 out[8] = ((0x7fffffe + x21) - x39); in fe_sub_impl() 315 { const u32 x21 = in1[8]; in fe_mul_impl() local 342 … + ((u64)x37 * x7)))) + ((u64)x27 * x17)) + ((u64)x35 * x9)) + ((u64)x23 * x21)) + ((u64)x39 * x5)… in fe_mul_impl() 343 …) + ((u64)x35 * x11)) + ((u64)x27 * x19)) + ((u64)x37 * x9)) + ((u64)x25 * x21)) + ((u64)x39 * x7)… in fe_mul_impl() 344 … + ((u64)x38 * x7))) + ((u64)x31 * x17)) + ((u64)x35 * x13)) + ((u64)x27 * x21)) + ((u64)x39 * x9)… in fe_mul_impl() [all …]
|
/linux-6.1.9/arch/arm64/kernel/ |
D | entry.S | 213 stp x20, x21, [sp, #16 * 10] 221 mrs x21, sp_el0 277 add x21, sp, #PT_REGS_SIZE 282 stp lr, x21, [sp, #S_LR] 340 mrs_s x21, SYS_ICC_CTLR_EL1 341 tbz x21, #6, .L__skip_pmr_sync\@ // Check for ICC_CTLR_EL1.PMHE 347 ldp x21, x22, [sp, #S_PC] // load ELR, SPSR 403 msr elr_el1, x21 // set up the return data 415 ldp x20, x21, [sp, #16 * 10] 458 mrs x21, ttbr0_el1 [all …]
|
D | hibernate-asm.S | 55 mov x21, x1 85 break_before_make_ttbr_switch x25, x21, x6, x8
|
D | efi-rt-wrapper.S | 27 stp x21, x22, [sp, #48] 81 ldp x21, x22, [sp, #48]
|
D | head.S | 116 mov x21, x0 // x21=FDT 119 stp x21, x1, [x0] // x0 .. x3 at kernel entry 351 bfi x22, x21, #0, #SWAPPER_BLOCK_SHIFT // remapped FDT address 353 bic x4, x21, #SWAPPER_BLOCK_SIZE - 1 431 str_l x21, __fdt_pointer, x5 // Save FDT pointer 461 mov x0, x21 // pass FDT address in x0
|
D | sleep.S | 68 stp x21, x22, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+32] 147 ldp x21, x22, [x29, #32]
|
/linux-6.1.9/Documentation/leds/ |
D | leds-mlxcpld.rst | 36 - CPLD reg offset: 0x21 40 - CPLD reg offset: 0x21 81 - CPLD reg offset: 0x21
|
/linux-6.1.9/drivers/net/wan/ |
D | wanxlfw.inc_shipped | 6 0x00,0x00,0x00,0x10,0x66,0x00,0xFF,0xDE,0x21,0xFC,0x00,0x00,0x16,0xBC,0x00,0x6C, 7 0x21,0xFC,0x00,0x00,0x17,0x5E,0x01,0x00,0x21,0xFC,0x00,0x00,0x16,0xDE,0x01,0x78, 8 0x21,0xFC,0x00,0x00,0x16,0xFE,0x01,0x74,0x21,0xFC,0x00,0x00,0x17,0x1E,0x01,0x70, 9 0x21,0xFC,0x00,0x00,0x17,0x3E,0x01,0x6C,0x21,0xFC,0x00,0x00,0x18,0x4C,0x02,0x00, 26 0x02,0x4E,0x21,0x7C,0x00,0x00,0x00,0x01,0x00,0x00,0x42,0xB0,0x09,0xB0,0x00,0x00, 76 0x42,0x81,0x21,0x81,0x09,0xB0,0x00,0x00,0x19,0x68,0x52,0xB0,0x09,0xB0,0x00,0x00, 84 0xFA,0xF4,0x0C,0xB0,0x00,0x00,0x00,0x00,0x29,0x90,0x66,0x00,0x00,0x96,0x21,0x83, 88 0x23,0xFC,0x00,0x00,0x03,0x01,0xFF,0xF9,0x01,0x28,0x61,0x00,0x01,0x2C,0x21,0xB0, 93 0x66,0x00,0x00,0x04,0x42,0x81,0x21,0x81,0x09,0xB0,0x00,0x00,0x19,0x88,0x60,0x00, 101 0x00,0x00,0x00,0x0A,0x66,0x00,0x00,0x04,0x42,0x81,0x21,0x81,0x09,0xB0,0x00,0x00, [all …]
|
/linux-6.1.9/net/wireless/certs/ |
D | sforshee.hex | 33 0xb8, 0xd1, 0x56, 0x21, 0xf0, 0x53, 0x1f, 0xf1, 57 0x48, 0xb9, 0xfe, 0x07, 0x17, 0xbb, 0x21, 0xf7, 75 0xd7, 0x8a, 0xe7, 0xf5, 0xd4, 0x21, 0x30, 0x4a, 85 0x33, 0xa9, 0x21, 0x1f, 0xcb, 0x50, 0xb1, 0x8f,
|
/linux-6.1.9/tools/testing/selftests/kvm/lib/aarch64/ |
D | handlers.S | 15 stp x20, x21, [sp, #16 * 10] 46 ldp x20, x21, [sp, #16 * 10]
|
/linux-6.1.9/arch/arm64/kernel/probes/ |
D | kprobes_trampoline.S | 23 stp x20, x21, [sp, #S_X20] 57 ldp x20, x21, [sp, #S_X20]
|
/linux-6.1.9/arch/riscv/kernel/probes/ |
D | kprobes_trampoline.S | 33 REG_S x21, PT_S5(sp) 65 REG_L x21, PT_S5(sp)
|
/linux-6.1.9/Documentation/devicetree/bindings/serial/ |
D | renesas,scifa.yaml | 110 dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
|
/linux-6.1.9/Documentation/hwmon/ |
D | abituguru-datasheet.rst | 184 Bank 0x21 Sensor Bank1 Values / Readings (R) 217 address in Bank 0x21 . 256 - Temp sensor: warning threshold (scale as bank 0x21) 257 - Volt sensor: min threshold (scale as bank 0x21) 260 - Temp sensor: shutdown threshold (scale as bank 0x21) 261 - Volt sensor: max threshold (scale as bank 0x21) 274 low nibble (temp)sensor address at bank 0x21 used for control. 285 Low threshold temp (scale as bank 0x21) 288 High threshold temp (scale as bank 0x21)
|
/linux-6.1.9/arch/arm/boot/dts/ |
D | r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi | 17 reg = <0x21>;
|
D | socfpga_arria10_chameleonv3.dts | 50 reg = <0x21>;
|
D | imx6q-apalis-ixora-v1.2.dts | 106 * uart-2-4-on-x21-enable-hog enables the UART transceiver for Apalis 111 uart-2-4-on-x21-enable-hog {
|
/linux-6.1.9/tools/testing/selftests/arm64/abi/ |
D | syscall-abi-asm.S | 55 stp x21, x22, [sp, #48] 87 ldp x20, x21, [x2], #16 193 stp x20, x21, [x2], #16 306 ldp x21, x22, [sp, #48]
|
/linux-6.1.9/drivers/scsi/aic7xxx/ |
D | aic79xx_seq.h_shipped | 20 0x00, 0x32, 0x21, 0x60, 22 0x00, 0x33, 0x21, 0x60, 35 0xff, 0x21, 0x3b, 0x70, 145 0xff, 0x21, 0x19, 0x71, 151 0x05, 0x4d, 0x21, 0x69, 263 0xff, 0x21, 0x01, 0x62, 690 0x01, 0x90, 0x21, 0x1b, 741 0xff, 0x90, 0x21, 0x1b, 755 0xff, 0x90, 0x21, 0x1b, 784 0x01, 0x90, 0x21, 0x1b, [all …]
|
/linux-6.1.9/arch/arm64/boot/dts/mediatek/ |
D | mt8183-kukui-audio-da7219.dtsi | 36 dlg,b-c-btn-thr = <0x21>;
|