| /linux-6.1.9/drivers/phy/broadcom/ |
| D | phy-bcm63xx-usbh.c | 224 static inline bool usbh_has_reg(struct bcm63xx_usbh_phy *usbh, int reg) in usbh_has_reg() argument
226 return (usbh->variant->regs[reg] >= 0); in usbh_has_reg()
229 static inline u32 usbh_readl(struct bcm63xx_usbh_phy *usbh, int reg) in usbh_readl() argument
231 return __raw_readl(usbh->base + usbh->variant->regs[reg]); in usbh_readl()
234 static inline void usbh_writel(struct bcm63xx_usbh_phy *usbh, int reg, in usbh_writel() argument
237 __raw_writel(value, usbh->base + usbh->variant->regs[reg]); in usbh_writel()
242 struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy); in bcm63xx_usbh_phy_init() local
245 ret = clk_prepare_enable(usbh->usbh_clk); in bcm63xx_usbh_phy_init()
251 ret = clk_prepare_enable(usbh->usb_ref_clk); in bcm63xx_usbh_phy_init()
254 clk_disable_unprepare(usbh->usbh_clk); in bcm63xx_usbh_phy_init()
[all …]
|
| D | Makefile | 2 obj-$(CONFIG_PHY_BCM63XX_USBH) += phy-bcm63xx-usbh.o
|
| /linux-6.1.9/Documentation/devicetree/bindings/phy/ |
| D | brcm,bcm63xx-usbh-phy.yaml | 4 $id: "http://devicetree.org/schemas/phy/brcm,bcm63xx-usbh-phy.yaml#"
15 - brcm,bcm6318-usbh-phy
16 - brcm,bcm6328-usbh-phy
17 - brcm,bcm6358-usbh-phy
18 - brcm,bcm6362-usbh-phy
19 - brcm,bcm6368-usbh-phy
20 - brcm,bcm63268-usbh-phy
32 - const: usbh
55 - brcm,bcm6318-usbh-phy
56 - brcm,bcm6328-usbh-phy
[all …]
|
| /linux-6.1.9/arch/mips/boot/dts/brcm/ |
| D | bcm6328.dtsi | 203 phys = <&usbh 0>;
218 phys = <&usbh 0>;
224 usbh: usb-phy@10002700 { label
225 compatible = "brcm,bcm6328-usbh-phy";
230 clock-names = "usbh";
235 reset-names = "usbh";
|
| D | bcm6368.dtsi | 191 phys = <&usbh 0>;
206 phys = <&usbh 0>;
212 usbh: usb-phy@10001700 { label
213 compatible = "brcm,bcm6368-usbh-phy";
218 clock-names = "usbh";
221 reset-names = "usbh";
|
| D | bcm63268.dtsi | 231 phys = <&usbh 0>;
246 phys = <&usbh 0>;
252 usbh: usb-phy@10002700 { label
253 compatible = "brcm,bcm63268-usbh-phy";
258 clock-names = "usbh";
263 reset-names = "usbh";
|
| D | bcm6362.dtsi | 227 phys = <&usbh 0>;
242 phys = <&usbh 0>;
248 usbh: usb-phy@10002700 { label
249 compatible = "brcm,bcm6362-usbh-phy";
255 clock-names = "usbh";
260 reset-names = "usbh";
|
| D | bcm6358.dtsi | 168 phys = <&usbh 0>;
183 phys = <&usbh 0>;
189 usbh: usb-phy@fffe1500 { label
190 compatible = "brcm,bcm6358-usbh-phy";
195 reset-names = "usbh";
|
| /linux-6.1.9/arch/arm/boot/dts/ |
| D | tegra20-colibri-iris.dts | 97 usbh-pen {
236 reg_usbh_vbus: regulator-usbh-vbus {
|
| D | tegra20-colibri-eval-v3.dts | 97 usbh-pen {
254 reg_usbh_vbus: regulator-usbh-vbus {
|
| D | imx6ull-colibri-eval-v3.dtsi | 32 reg_usbh_vbus: regulator-usbh-vbus {
|
| D | imx6ull-colibri-iris.dtsi | 39 reg_usbh_vbus: regulator-usbh-vbus {
|
| D | imx6ull-colibri-aster.dtsi | 39 reg_usbh_vbus: regulator-usbh-vbus {
|
| D | vf-colibri-eval-v3.dtsi | 42 reg_usbh_vbus: regulator-usbh-vbus {
|
| D | tegra30-colibri-eval-v3.dts | 190 reg_usbh_vbus: regulator-usbh-vbus {
|
| D | tegra30-apalis-eval.dts | 229 reg_usbh_vbus: regulator-usbh-vbus {
|
| D | tegra124-apalis-eval.dts | 236 reg_usbh_vbus: regulator-usbh-vbus {
|
| D | tegra124-apalis-v1.2-eval.dts | 238 reg_usbh_vbus: regulator-usbh-vbus {
|
| D | sun9i-a80-optimus.dts | 227 regulator-name = "vcc33-usbh";
244 regulator-name = "vdd-cpus-09-usbh";
|
| D | sun9i-a80-cubieboard4.dts | 230 regulator-name = "vcc33-usbh";
251 regulator-name = "vdd-cpus-09-usbh";
|
| D | imx7d.dtsi | 13 usb2 = &usbh;
|
| D | tegra30-apalis-v1.1-eval.dts | 230 reg_usbh_vbus: regulator-usbh-vbus {
|
| D | tegra20-colibri.dtsi | 302 usbh-oc {
310 usbh-pen {
|
| /linux-6.1.9/include/dt-bindings/usb/ |
| D | pd.h | 132 #define VDO_IDH(usbh, usbd, ufp_cable, is_modal, dfp, conn, vid) \ argument
133 ((usbh) << 31 | (usbd) << 30 | ((ufp_cable) & 0x7) << 27 \
|
| /linux-6.1.9/include/linux/usb/ |
| D | pd_vdo.h | 143 #define VDO_IDH(usbh, usbd, ufp_cable, is_modal, dfp, conn, vid) \ argument
144 ((usbh) << 31 | (usbd) << 30 | ((ufp_cable) & 0x7) << 27 \
|