| /linux-6.1.9/arch/arm64/boot/dts/hisilicon/ |
| D | hikey970-pinctrl.dtsi | 11 #pinctrl-single,gpio-range-cells = <3>;
15 compatible = "pinctrl-single";
19 pinctrl-single,register-width = <0x20>;
20 pinctrl-single,function-mask = <0x7>;
22 pinctrl-single,gpio-range = <&range 0 82 0>;
25 pinctrl-single,pins = <
32 pinctrl-single,pins = <
41 pinctrl-single,pins = <
50 pinctrl-single,pins = <
59 pinctrl-single,pins = <
[all …]
|
| D | hikey960-pinctrl.dtsi | 13 #pinctrl-single,gpio-range-cells = <3>;
17 compatible = "pinctrl-single";
21 pinctrl-single,register-width = <0x20>;
22 pinctrl-single,function-mask = <0x7>;
24 pinctrl-single,gpio-range = <
29 pinctrl-single,pins = <
38 pinctrl-single,pins = <
44 pinctrl-single,pins = <
50 pinctrl-single,pins = <
58 pinctrl-single,pins = <
[all …]
|
| D | hikey-pinctrl.dtsi | 21 pinctrl-single,pins = <
27 pinctrl-single,pins = <
42 pinctrl-single,pins = <
52 pinctrl-single,pins = <
63 pinctrl-single,pins = <
73 pinctrl-single,pins = <
84 pinctrl-single,pins = <
105 pinctrl-single,pins = <
111 pinctrl-single,pins = <
117 pinctrl-single,pins = <
[all …]
|
| D | poplar-pinctrl.dtsi | 20 pinctrl-single,pins = <
31 pinctrl-single,bias-pulldown = <
34 pinctrl-single,bias-pullup = <
37 pinctrl-single,slew-rate = <
40 pinctrl-single,drive-strength = <
46 pinctrl-single,pins = <
49 pinctrl-single,bias-pulldown = <
52 pinctrl-single,bias-pullup = <
55 pinctrl-single,slew-rate = <
58 pinctrl-single,drive-strength = <
[all …]
|
| /linux-6.1.9/arch/arm/boot/dts/ |
| D | hi3620-hi4511.dts | 70 pinctrl-single,pins = <
76 pinctrl-single,pins = <
82 pinctrl-single,pins = <
88 pinctrl-single,pins = <
94 pinctrl-single,pins = <
100 pinctrl-single,pins = <
106 pinctrl-single,pins = <
112 pinctrl-single,pins = <
118 pinctrl-single,pins = <
124 pinctrl-single,pins = <
[all …]
|
| D | am335x-pocketbeagle.dts | 208 compatible = "pinconf-single";
218 pinctrl-single,pins = <
221 pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
222 pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
227 pinctrl-single,pins = <
230 pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
231 pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
236 pinctrl-single,pins = <
239 pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>;
240 pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>;
[all …]
|
| D | pxa300-raumfeld-controller.dts | 132 st,click-single-x;
133 st,click-single-y;
134 st,click-single-z;
207 pinctrl-single,pins = <
210 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
214 pinctrl-single,pins = <
217 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
221 pinctrl-single,pins = <
224 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
228 pinctrl-single,pins = <
[all …]
|
| D | pxa300-raumfeld-common.dtsi | 298 pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>;
299 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
303 pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>;
304 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
308 pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>;
309 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
313 pinctrl-single,pins = <
317 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
321 pinctrl-single,pins = <
326 pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
[all …]
|
| D | omap3-ha-common.dtsi | 21 pinctrl-single,pins = <
27 pinctrl-single,pins = <
33 pinctrl-single,pins = <
39 pinctrl-single,pins = <
45 pinctrl-single,pins = <
51 pinctrl-single,pins = <
57 pinctrl-single,pins = <
66 pinctrl-single,pins = <
|
| D | am335x-myirtech-myd.dts | 303 pinctrl-single,pins = <
310 pinctrl-single,pins = <
317 pinctrl-single,pins = <
324 pinctrl-single,pins = <
331 pinctrl-single,pins = <
337 pinctrl-single,pins = <
343 pinctrl-single,pins = <
360 pinctrl-single,pins = <
377 pinctrl-single,pins = <
384 pinctrl-single,pins = <
[all …]
|
| D | omap4-var-om44customboard.dtsi | 64 pinctrl-single,pins = <
73 pinctrl-single,pins = <
82 pinctrl-single,pins = <
88 pinctrl-single,pins = <
121 pinctrl-single,pins = <
129 pinctrl-single,pins = <
136 pinctrl-single,pins = <
148 pinctrl-single,pins = <
155 pinctrl-single,pins = <
161 pinctrl-single,pins = <
[all …]
|
| D | da850.dtsi | 155 compatible = "pinctrl-single";
158 pinctrl-single,bit-per-mux;
159 pinctrl-single,register-width = <32>;
160 pinctrl-single,function-mask = <0xf>;
162 pinctrl-single,gpio-range = <&range 0 17 0x8>,
170 #pinctrl-single,gpio-range-cells = <3>;
174 pinctrl-single,bits = <
180 pinctrl-single,bits = <
186 pinctrl-single,bits = <
192 pinctrl-single,bits = <
[all …]
|
| D | omap4-panda-es.dts | 33 pinctrl-single,pins = <
42 pinctrl-single,pins = <
48 pinctrl-single,pins = <
54 pinctrl-single,pins = <
61 pinctrl-single,pins = <
71 pinctrl-single,pins = <
101 pinctrl-single,pins = <
|
| D | omap3-gta04.dtsi | 205 compatible = "pinctrl-single";
209 pinctrl-single,bit-per-mux;
210 pinctrl-single,register-width = <32>;
211 pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */
217 pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */
223 compatible = "pinctrl-single";
227 pinctrl-single,bit-per-mux;
228 pinctrl-single,register-width = <32>;
229 pinctrl-single,function-mask = <0x81>; /* TV out pin control */
235 pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */
[all …]
|
| D | am335x-pcm-953.dtsi | 74 pinctrl-single,pins = <
81 pinctrl-single,pins = <
91 pinctrl-single,pins = <
107 pinctrl-single,pins = <
148 pinctrl-single,pins = <
158 pinctrl-single,pins = <
182 pinctrl-single,pins = <
189 pinctrl-single,pins = <
198 pinctrl-single,pins = <
205 pinctrl-single,pins = <
|
| D | am335x-cm-t335.dts | 92 pinctrl-single,pins = <
99 pinctrl-single,pins = <
108 pinctrl-single,pins = <
115 pinctrl-single,pins = <
136 pinctrl-single,pins = <
143 pinctrl-single,pins = <
152 pinctrl-single,pins = <
161 pinctrl-single,pins = <
170 pinctrl-single,pins = <
176 pinctrl-single,pins = <
[all …]
|
| D | am335x-chiliboard.dts | 40 pinctrl-single,pins = <
47 pinctrl-single,pins = <
61 pinctrl-single,pins = <
76 pinctrl-single,pins = <
85 pinctrl-single,pins = <
93 pinctrl-single,pins = <
99 pinctrl-single,pins = <
111 pinctrl-single,pins = <
|
| D | am57xx-sbc-am57x.dts | 3 * Support for CompuLab SBC-AM57x single board computer
24 pinctrl-single,pins = <
31 pinctrl-single,pins = <
44 pinctrl-single,pins = <
50 pinctrl-single,pins = <
57 pinctrl-single,pins = <
63 pinctrl-single,pins = <
70 pinctrl-single,pins = <
|
| D | omap3-cm-t3517.dts | 47 pinctrl-single,pins = <
57 pinctrl-single,pins = <
63 pinctrl-single,pins = <
69 pinctrl-single,pins = <
75 pinctrl-single,pins = <
86 pinctrl-single,pins = <
93 pinctrl-single,pins = <
|
| /linux-6.1.9/Documentation/devicetree/bindings/pinctrl/ |
| D | pinctrl-single.txt | 4 - compatible : "pinctrl-single" or "pinconf-single".
5 "pinctrl-single" means that pinconf isn't supported.
6 "pinconf-single" means that generic pinconf is supported.
11 or 2 for pinctrl-single,pins and set to 2 for pinctrl-single,bits
13 - pinctrl-single,register-width : pinmux register access width in bits
15 - pinctrl-single,function-mask : mask of allowed pinmux function bits
19 - pinctrl-single,function-off : function off mode for disabled state if
23 - pinctrl-single,bit-per-mux : boolean to indicate that one register controls
24 more than one pin, for which "pinctrl-single,function-mask" property specifies
27 - pinctrl-single,drive-strength : array of value that are used to configure
[all …]
|
| /linux-6.1.9/arch/mips/boot/dts/ralink/ |
| D | mt7628a.dtsi | 45 compatible = "pinctrl-single";
50 pinctrl-single,bit-per-mux;
51 pinctrl-single,register-width = <32>;
52 pinctrl-single,function-mask = <0x1>;
55 pinctrl-single,bits = <0x0 0x0 0x3>;
59 pinctrl-single,bits = <0x0 0x0 0x30>;
63 pinctrl-single,bits = <0x0 0x40 0xc0>;
67 pinctrl-single,bits = <0x0 0x0 0x300>;
71 pinctrl-single,bits = <0x0 0x0 0xc00>;
75 pinctrl-single,bits = <0x0 0x400 0xc00>;
[all …]
|
| /linux-6.1.9/arch/arm64/boot/dts/broadcom/stingray/ |
| D | stingray-pinctrl.dtsi | 36 compatible = "pinconf-single";
38 pinctrl-single,register-width = <32>;
44 compatible = "pinctrl-single";
48 pinctrl-single,register-width = <32>;
49 pinctrl-single,function-mask = <0xf>;
50 pinctrl-single,gpio-range = <
55 #pinctrl-single,gpio-range-cells = <3>;
60 pinctrl-single,pins = <
67 pinctrl-single,pins = <
123 pinctrl-single,pins = <
[all …]
|
| /linux-6.1.9/kernel/ |
| D | cpu.c | 73 bool single; member
126 int (*single)(unsigned int cpu); member
131 int (*single)(unsigned int cpu); member
152 return bringup ? !step->startup.single : !step->teardown.single; in cpuhp_step_empty()
189 cb = bringup ? step->startup.single : step->teardown.single; in cpuhp_invoke_callback()
487 st->single = false; in cpuhp_set_state()
531 if (!st->single && st->state == st->target) in __cpuhp_kick_ap()
794 if (st->single) { in cpuhp_thread_fun()
866 st->single = true; in cpuhp_invoke_ap_callback()
1683 .startup.single = NULL,
[all …]
|
| /linux-6.1.9/scripts/gcc-plugins/ |
| D | Makefile | 39 plugin-single := $(foreach m, $(GCC_PLUGIN), $(if $($(m:%.so=%-objs)),,$(m)))
40 plugin-multi := $(filter-out $(plugin-single), $(GCC_PLUGIN))
43 targets += $(plugin-single) $(plugin-multi) $(plugin-objs)
46 plugin-single := $(addprefix $(obj)/, $(plugin-single))
53 $(plugin-single): $(obj)/%.so: $(src)/%.c FORCE
|
| /linux-6.1.9/arch/arm64/boot/dts/ti/ |
| D | k3-am65-iot2050-common.dtsi | 109 pinctrl-single,pins = <
118 pinctrl-single,pins = <
127 pinctrl-single,pins = <
134 pinctrl-single,pins = <
141 pinctrl-single,pins = <
150 pinctrl-single,pins = <
159 pinctrl-single,pins = <
174 pinctrl-single,pins = <
189 pinctrl-single,pins = <
202 pinctrl-single,pins = <
[all …]
|