Searched refs:hooked (Results 1 – 25 of 58) sorted by relevance
123
22 Say Y here if you have ADE7854/58/68/78 hooked to an I2C bus.32 Say Y here if you have ADE7854/58/68/78 hooked to a SPI bus.
4 is hooked up to a pull-up GPIO line and - optionally - the HPD line is5 hooked up to another GPIO line.
66 has address 0.0.0.0. Every device that is hooked up to an input of the67 TV has address a.0.0.0 (where 'a' is ≥ 1), devices hooked up to those in
17 is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
14 is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
14 are hooked up to them. This is the DP AUX bus. Over the DP AUX bus
34 * Builtin CD line is hooked to ground to prevent JTAG at boot
166 * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from229 disable-wp; /* wp not hooked up */
64 /* The lcd panel i2c interface is hooked up via gpios */
62 /* The lcd panel i2c interface is hooked up via gpios */
150 disable-wp; /* wp not hooked up */
18 If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then19 bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to24 hooked up to the pins.
65 * Chrome designs always boot from SPI flash hooked up to the qspi.
113 * - If a pin is not hooked up on Qcard, it gets no name.
120 * - If a pin is not hooked up on Qcard, it gets no name.
150 * - If a pin is not hooked up on Qcard, it gets no name.
157 * - If a pin is not hooked up on Qcard, it gets no name.
435 dr_mode = "host"; /* Force to host until we have Type-C hooked up */
381 dr_mode = "host"; /* Force to host until we have Type-C hooked up */
108 needed if HPD hooked up, either through a GPIO in the panel node or109 hooked up directly to the eDP controller.
6 various security checks to be hooked by new kernel extensions. The name
13 device LEDs should be exposed as LED class devices and hooked up to the
69 These are all hooked together by the machine driver depending on the
34 Set if the HPD line on the bridge isn't hooked up to anything or is
61 Say Y here if you have AD7142/AD7147 hooked to an I2C bus.71 Say Y here if you have AD7142/AD7147 hooked to a SPI bus.127 acceleration sensor hooked to an I2C bus.718 Say Y here if you have ADXL345/6 hooked to an I2C bus.728 Say Y here if you have ADXL345/6 hooked to a SPI bus.