/linux-6.1.9/drivers/hwmon/ |
D | lm80.c | 108 f_min, enumerator 197 data->fan[f_min][0] = rv; in lm80_update_device() 207 data->fan[f_min][1] = rv; in lm80_update_device() 359 min = FAN_FROM_REG(data->fan[f_min][nr], in fan_div_store() 393 data->fan[f_min][nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); in fan_div_store() 395 data->fan[f_min][nr]); in fan_div_store() 471 static SENSOR_DEVICE_ATTR_2_RW(fan1_min, fan, f_min, 0); 472 static SENSOR_DEVICE_ATTR_2_RW(fan2_min, fan, f_min, 1); 611 data->fan[f_min][0] = lm80_read_value(client, LM80_REG_FAN_MIN(1)); in lm80_probe() 612 data->fan[f_min][1] = lm80_read_value(client, LM80_REG_FAN_MIN(2)); in lm80_probe()
|
/linux-6.1.9/drivers/gpu/drm/amd/pm/powerplay/hwmgr/ |
D | ppevvmath.h | 79 static fInt fDecodeLinearFuse(uint32_t fuse_value, fInt f_min, fInt f_range, uint32_t bitlength); 81 static fInt fDecodeLeakageID (uint32_t leakageID_fuse, fInt ln_max_div_min, fInt f_min, uint32_t bi… 172 static fInt fDecodeLinearFuse(uint32_t fuse_value, fInt f_min, fInt f_range, uint32_t bitlength) in fDecodeLinearFuse() argument 181 f_decoded_value = fAdd(f_decoded_value, f_min); in fDecodeLinearFuse() 205 static fInt fDecodeLeakageID (uint32_t leakageID_fuse, fInt ln_max_div_min, fInt f_min, uint32_t bi… in fDecodeLeakageID() argument 213 fLeakage = fMultiply(fLeakage, f_min); in fDecodeLeakageID()
|
/linux-6.1.9/drivers/mmc/host/ |
D | sh_mmcif.c | 999 unsigned int f_max, f_min = 0, f_min_old; in sh_mmcif_clk_setup() local 1003 f_min = clk_round_rate(host->clk, f_min_old / 2); in sh_mmcif_clk_setup() 1004 if (f_min == f_min_old) in sh_mmcif_clk_setup() 1006 f_min_old = f_min; in sh_mmcif_clk_setup() 1015 host->mmc->f_min = f_min >> fls(host->clkdiv_map); in sh_mmcif_clk_setup() 1020 host->mmc->f_min = clk / 512; in sh_mmcif_clk_setup() 1024 host->mmc->f_max, host->mmc->f_min); in sh_mmcif_clk_setup()
|
D | wmt-sdmmc.c | 176 unsigned int f_min; member 734 .f_min = 390425, 786 mmc->f_min = wmt_caps->f_min; in wmt_mci_probe()
|
D | cavium.c | 909 clock = max(clock, mmc->f_min); in cvm_mmc_set_clock() 924 cvm_mmc_set_clock(slot, slot->mmc->f_min); in cvm_mmc_init_lowlevel() 997 mmc->f_min = 400000; in cvm_mmc_of_parse() 1055 slot->clock = mmc->f_min; in cvm_mmc_of_slot_probe()
|
D | tmio_mmc.c | 165 host->mmc->f_min = pdata->hclk / 512; in tmio_mmc_probe()
|
D | uniphier-sd.c | 379 mmc->f_min = priv->clk_rate / 1024; in uniphier_sd_clk_enable() 381 mmc->f_min = priv->clk_rate / 512; in uniphier_sd_clk_enable()
|
D | sdricoh_cs.c | 430 mmc->f_min = 450000; in sdricoh_init_mmc()
|
D | mmci.c | 2102 mmc->f_min = DIV_ROUND_UP(host->mclk, 257); in mmci_probe() 2104 mmc->f_min = DIV_ROUND_UP(host->mclk, 2046); in mmci_probe() 2106 mmc->f_min = clk_round_rate(host->clk, 100000); in mmci_probe() 2108 mmc->f_min = DIV_ROUND_UP(host->mclk, 512); in mmci_probe()
|
D | ushc.c | 450 mmc->f_min = 400000; in ushc_probe()
|
D | litex_mmc.c | 603 mmc->f_min = 12.5e6; in litex_mmc_probe()
|
D | owl-mmc.c | 609 mmc->f_min = 100000; in owl_mmc_probe()
|
D | toshsd.c | 642 mmc->f_min = HCLK / 512; in toshsd_probe()
|
D | meson-gx-mmc.c | 500 host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000); in meson_mmc_clk_init() 501 ret = clk_set_rate(host->mmc_clk, host->mmc->f_min); in meson_mmc_clk_init()
|
D | bcm2835.c | 1274 mmc->f_min = host->max_clk / SDCDIV_MAX_CDIV; in bcm2835_add_host() 1279 mmc->f_max, mmc->f_min, mmc->max_busy_timeout); in bcm2835_add_host()
|
D | moxart-mmc.c | 612 mmc->f_min = DIV_ROUND_CLOSEST(host->sysclk, CLK_DIV_MASK * 2); in moxart_probe()
|
/linux-6.1.9/Documentation/translations/zh_CN/scheduler/ |
D | schedutil.rst | 145 工作负荷所需的硬f_min值。
|
/linux-6.1.9/drivers/cpufreq/ |
D | longhaul.c | 411 int f_max, f_min; in guess_fsb() local 416 f_min = f_max - ROUNDING; in guess_fsb() 417 if ((speed <= f_max) && (speed >= f_min)) in guess_fsb()
|
/linux-6.1.9/drivers/media/tuners/ |
D | mt2063.c | 426 u32 f_min, u32 f_max) in MT2063_AddExclZone() argument 436 && (f_min < (pAS_Info->f_if1_Center + (pAS_Info->f_if1_bw / 2))) in MT2063_AddExclZone() 437 && (f_min < f_max)) { in MT2063_AddExclZone() 447 while ((pNode != NULL) && (pNode->max_ < f_min)) { in MT2063_AddExclZone() 454 if (f_min < pNode->min_) in MT2063_AddExclZone() 455 pNode->min_ = f_min; in MT2063_AddExclZone() 460 pNode->min_ = f_min; in MT2063_AddExclZone()
|
/linux-6.1.9/drivers/mmc/core/ |
D | debugfs.c | 213 if (val != 0 && (val > host->f_max || val < host->f_min)) in mmc_clock_opt_set()
|
D | core.c | 912 WARN_ON(hz && hz < host->f_min); in mmc_set_clock() 2255 if (!mmc_rescan_try_freq(host, max(freq, host->f_min))) in mmc_rescan() 2257 if (freqs[i] <= host->f_min) in mmc_rescan() 2275 host->f_init = max(min(freqs[0], host->f_max), host->f_min); in mmc_start_host()
|
/linux-6.1.9/drivers/ufs/host/ |
D | ufs-exynos.c | 419 u32 f_min, f_max; in exynos_ufs_get_clk_info() local 443 f_min = ufs->pclk_avail_min; in exynos_ufs_get_clk_info() 453 } while (pclk_rate >= f_min); in exynos_ufs_get_clk_info() 456 if (unlikely(pclk_rate < f_min || pclk_rate > f_max)) { in exynos_ufs_get_clk_info()
|
/linux-6.1.9/drivers/staging/greybus/ |
D | sdio.c | 153 mmc->f_min = le32_to_cpu(response.f_min); in gb_sdio_get_caps()
|
/linux-6.1.9/include/linux/mmc/ |
D | host.h | 320 unsigned int f_min; member
|
/linux-6.1.9/Documentation/scheduler/ |
D | schedutil.rst | 148 XXX: deadline tasks (Sporadic Task Model) allows us to calculate a hard f_min
|