1 /*
2  * Management Module Support for MPT (Message Passing Technology) based
3  * controllers
4  *
5  * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.c
6  * Copyright (C) 2012-2014  LSI Corporation
7  * Copyright (C) 2013-2014 Avago Technologies
8  *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License
12  * as published by the Free Software Foundation; either version 2
13  * of the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * NO WARRANTY
21  * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
22  * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
23  * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
24  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
25  * solely responsible for determining the appropriateness of using and
26  * distributing the Program and assumes all risks associated with its
27  * exercise of rights under this Agreement, including but not limited to
28  * the risks and costs of program errors, damage to or loss of data,
29  * programs or equipment, and unavailability or interruption of operations.
30 
31  * DISCLAIMER OF LIABILITY
32  * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
33  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34  * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
35  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
36  * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
37  * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
38  * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39 
40  * You should have received a copy of the GNU General Public License
41  * along with this program; if not, write to the Free Software
42  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
43  * USA.
44  */
45 
46 #include <linux/kernel.h>
47 #include <linux/module.h>
48 #include <linux/errno.h>
49 #include <linux/init.h>
50 #include <linux/slab.h>
51 #include <linux/types.h>
52 #include <linux/pci.h>
53 #include <linux/delay.h>
54 #include <linux/compat.h>
55 #include <linux/poll.h>
56 
57 #include <linux/io.h>
58 #include <linux/uaccess.h>
59 
60 #include "mpt3sas_base.h"
61 #include "mpt3sas_ctl.h"
62 
63 
64 static struct fasync_struct *async_queue;
65 static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
66 
67 
68 /**
69  * enum block_state - blocking state
70  * @NON_BLOCKING: non blocking
71  * @BLOCKING: blocking
72  *
73  * These states are for ioctls that need to wait for a response
74  * from firmware, so they probably require sleep.
75  */
76 enum block_state {
77 	NON_BLOCKING,
78 	BLOCKING,
79 };
80 
81 /**
82  * _ctl_display_some_debug - debug routine
83  * @ioc: per adapter object
84  * @smid: system request message index
85  * @calling_function_name: string pass from calling function
86  * @mpi_reply: reply message frame
87  * Context: none.
88  *
89  * Function for displaying debug info helpful when debugging issues
90  * in this module.
91  */
92 static void
_ctl_display_some_debug(struct MPT3SAS_ADAPTER * ioc,u16 smid,char * calling_function_name,MPI2DefaultReply_t * mpi_reply)93 _ctl_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
94 	char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
95 {
96 	Mpi2ConfigRequest_t *mpi_request;
97 	char *desc = NULL;
98 
99 	if (!(ioc->logging_level & MPT_DEBUG_IOCTL))
100 		return;
101 
102 	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
103 	switch (mpi_request->Function) {
104 	case MPI2_FUNCTION_SCSI_IO_REQUEST:
105 	{
106 		Mpi2SCSIIORequest_t *scsi_request =
107 		    (Mpi2SCSIIORequest_t *)mpi_request;
108 
109 		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
110 		    "scsi_io, cmd(0x%02x), cdb_len(%d)",
111 		    scsi_request->CDB.CDB32[0],
112 		    le16_to_cpu(scsi_request->IoFlags) & 0xF);
113 		desc = ioc->tmp_string;
114 		break;
115 	}
116 	case MPI2_FUNCTION_SCSI_TASK_MGMT:
117 		desc = "task_mgmt";
118 		break;
119 	case MPI2_FUNCTION_IOC_INIT:
120 		desc = "ioc_init";
121 		break;
122 	case MPI2_FUNCTION_IOC_FACTS:
123 		desc = "ioc_facts";
124 		break;
125 	case MPI2_FUNCTION_CONFIG:
126 	{
127 		Mpi2ConfigRequest_t *config_request =
128 		    (Mpi2ConfigRequest_t *)mpi_request;
129 
130 		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
131 		    "config, type(0x%02x), ext_type(0x%02x), number(%d)",
132 		    (config_request->Header.PageType &
133 		     MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType,
134 		    config_request->Header.PageNumber);
135 		desc = ioc->tmp_string;
136 		break;
137 	}
138 	case MPI2_FUNCTION_PORT_FACTS:
139 		desc = "port_facts";
140 		break;
141 	case MPI2_FUNCTION_PORT_ENABLE:
142 		desc = "port_enable";
143 		break;
144 	case MPI2_FUNCTION_EVENT_NOTIFICATION:
145 		desc = "event_notification";
146 		break;
147 	case MPI2_FUNCTION_FW_DOWNLOAD:
148 		desc = "fw_download";
149 		break;
150 	case MPI2_FUNCTION_FW_UPLOAD:
151 		desc = "fw_upload";
152 		break;
153 	case MPI2_FUNCTION_RAID_ACTION:
154 		desc = "raid_action";
155 		break;
156 	case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
157 	{
158 		Mpi2SCSIIORequest_t *scsi_request =
159 		    (Mpi2SCSIIORequest_t *)mpi_request;
160 
161 		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
162 		    "raid_pass, cmd(0x%02x), cdb_len(%d)",
163 		    scsi_request->CDB.CDB32[0],
164 		    le16_to_cpu(scsi_request->IoFlags) & 0xF);
165 		desc = ioc->tmp_string;
166 		break;
167 	}
168 	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
169 		desc = "sas_iounit_cntl";
170 		break;
171 	case MPI2_FUNCTION_SATA_PASSTHROUGH:
172 		desc = "sata_pass";
173 		break;
174 	case MPI2_FUNCTION_DIAG_BUFFER_POST:
175 		desc = "diag_buffer_post";
176 		break;
177 	case MPI2_FUNCTION_DIAG_RELEASE:
178 		desc = "diag_release";
179 		break;
180 	case MPI2_FUNCTION_SMP_PASSTHROUGH:
181 		desc = "smp_passthrough";
182 		break;
183 	case MPI2_FUNCTION_TOOLBOX:
184 		desc = "toolbox";
185 		break;
186 	case MPI2_FUNCTION_NVME_ENCAPSULATED:
187 		desc = "nvme_encapsulated";
188 		break;
189 	}
190 
191 	if (!desc)
192 		return;
193 
194 	ioc_info(ioc, "%s: %s, smid(%d)\n", calling_function_name, desc, smid);
195 
196 	if (!mpi_reply)
197 		return;
198 
199 	if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
200 		ioc_info(ioc, "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
201 			 le16_to_cpu(mpi_reply->IOCStatus),
202 			 le32_to_cpu(mpi_reply->IOCLogInfo));
203 
204 	if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
205 	    mpi_request->Function ==
206 	    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
207 		Mpi2SCSIIOReply_t *scsi_reply =
208 		    (Mpi2SCSIIOReply_t *)mpi_reply;
209 		struct _sas_device *sas_device = NULL;
210 		struct _pcie_device *pcie_device = NULL;
211 
212 		sas_device = mpt3sas_get_sdev_by_handle(ioc,
213 		    le16_to_cpu(scsi_reply->DevHandle));
214 		if (sas_device) {
215 			ioc_warn(ioc, "\tsas_address(0x%016llx), phy(%d)\n",
216 				 (u64)sas_device->sas_address,
217 				 sas_device->phy);
218 			ioc_warn(ioc, "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
219 				 (u64)sas_device->enclosure_logical_id,
220 				 sas_device->slot);
221 			sas_device_put(sas_device);
222 		}
223 		if (!sas_device) {
224 			pcie_device = mpt3sas_get_pdev_by_handle(ioc,
225 				le16_to_cpu(scsi_reply->DevHandle));
226 			if (pcie_device) {
227 				ioc_warn(ioc, "\tWWID(0x%016llx), port(%d)\n",
228 					 (unsigned long long)pcie_device->wwid,
229 					 pcie_device->port_num);
230 				if (pcie_device->enclosure_handle != 0)
231 					ioc_warn(ioc, "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
232 						 (u64)pcie_device->enclosure_logical_id,
233 						 pcie_device->slot);
234 				pcie_device_put(pcie_device);
235 			}
236 		}
237 		if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
238 			ioc_info(ioc, "\tscsi_state(0x%02x), scsi_status(0x%02x)\n",
239 				 scsi_reply->SCSIState,
240 				 scsi_reply->SCSIStatus);
241 	}
242 }
243 
244 /**
245  * mpt3sas_ctl_done - ctl module completion routine
246  * @ioc: per adapter object
247  * @smid: system request message index
248  * @msix_index: MSIX table index supplied by the OS
249  * @reply: reply message frame(lower 32bit addr)
250  * Context: none.
251  *
252  * The callback handler when using ioc->ctl_cb_idx.
253  *
254  * Return: 1 meaning mf should be freed from _base_interrupt
255  *         0 means the mf is freed from this function.
256  */
257 u8
mpt3sas_ctl_done(struct MPT3SAS_ADAPTER * ioc,u16 smid,u8 msix_index,u32 reply)258 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
259 	u32 reply)
260 {
261 	MPI2DefaultReply_t *mpi_reply;
262 	Mpi2SCSIIOReply_t *scsiio_reply;
263 	Mpi26NVMeEncapsulatedErrorReply_t *nvme_error_reply;
264 	const void *sense_data;
265 	u32 sz;
266 
267 	if (ioc->ctl_cmds.status == MPT3_CMD_NOT_USED)
268 		return 1;
269 	if (ioc->ctl_cmds.smid != smid)
270 		return 1;
271 	ioc->ctl_cmds.status |= MPT3_CMD_COMPLETE;
272 	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
273 	if (mpi_reply) {
274 		memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
275 		ioc->ctl_cmds.status |= MPT3_CMD_REPLY_VALID;
276 		/* get sense data */
277 		if (mpi_reply->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
278 		    mpi_reply->Function ==
279 		    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
280 			scsiio_reply = (Mpi2SCSIIOReply_t *)mpi_reply;
281 			if (scsiio_reply->SCSIState &
282 			    MPI2_SCSI_STATE_AUTOSENSE_VALID) {
283 				sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
284 				    le32_to_cpu(scsiio_reply->SenseCount));
285 				sense_data = mpt3sas_base_get_sense_buffer(ioc,
286 				    smid);
287 				memcpy(ioc->ctl_cmds.sense, sense_data, sz);
288 			}
289 		}
290 		/*
291 		 * Get Error Response data for NVMe device. The ctl_cmds.sense
292 		 * buffer is used to store the Error Response data.
293 		 */
294 		if (mpi_reply->Function == MPI2_FUNCTION_NVME_ENCAPSULATED) {
295 			nvme_error_reply =
296 			    (Mpi26NVMeEncapsulatedErrorReply_t *)mpi_reply;
297 			sz = min_t(u32, NVME_ERROR_RESPONSE_SIZE,
298 			    le16_to_cpu(nvme_error_reply->ErrorResponseCount));
299 			sense_data = mpt3sas_base_get_sense_buffer(ioc, smid);
300 			memcpy(ioc->ctl_cmds.sense, sense_data, sz);
301 		}
302 	}
303 
304 	_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
305 	ioc->ctl_cmds.status &= ~MPT3_CMD_PENDING;
306 	complete(&ioc->ctl_cmds.done);
307 	return 1;
308 }
309 
310 /**
311  * _ctl_check_event_type - determines when an event needs logging
312  * @ioc: per adapter object
313  * @event: firmware event
314  *
315  * The bitmask in ioc->event_type[] indicates which events should be
316  * be saved in the driver event_log.  This bitmask is set by application.
317  *
318  * Return: 1 when event should be captured, or zero means no match.
319  */
320 static int
_ctl_check_event_type(struct MPT3SAS_ADAPTER * ioc,u16 event)321 _ctl_check_event_type(struct MPT3SAS_ADAPTER *ioc, u16 event)
322 {
323 	u16 i;
324 	u32 desired_event;
325 
326 	if (event >= 128 || !event || !ioc->event_log)
327 		return 0;
328 
329 	desired_event = (1 << (event % 32));
330 	if (!desired_event)
331 		desired_event = 1;
332 	i = event / 32;
333 	return desired_event & ioc->event_type[i];
334 }
335 
336 /**
337  * mpt3sas_ctl_add_to_event_log - add event
338  * @ioc: per adapter object
339  * @mpi_reply: reply message frame
340  */
341 void
mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER * ioc,Mpi2EventNotificationReply_t * mpi_reply)342 mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc,
343 	Mpi2EventNotificationReply_t *mpi_reply)
344 {
345 	struct MPT3_IOCTL_EVENTS *event_log;
346 	u16 event;
347 	int i;
348 	u32 sz, event_data_sz;
349 	u8 send_aen = 0;
350 
351 	if (!ioc->event_log)
352 		return;
353 
354 	event = le16_to_cpu(mpi_reply->Event);
355 
356 	if (_ctl_check_event_type(ioc, event)) {
357 
358 		/* insert entry into circular event_log */
359 		i = ioc->event_context % MPT3SAS_CTL_EVENT_LOG_SIZE;
360 		event_log = ioc->event_log;
361 		event_log[i].event = event;
362 		event_log[i].context = ioc->event_context++;
363 
364 		event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4;
365 		sz = min_t(u32, event_data_sz, MPT3_EVENT_DATA_SIZE);
366 		memset(event_log[i].data, 0, MPT3_EVENT_DATA_SIZE);
367 		memcpy(event_log[i].data, mpi_reply->EventData, sz);
368 		send_aen = 1;
369 	}
370 
371 	/* This aen_event_read_flag flag is set until the
372 	 * application has read the event log.
373 	 * For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify.
374 	 */
375 	if (event == MPI2_EVENT_LOG_ENTRY_ADDED ||
376 	    (send_aen && !ioc->aen_event_read_flag)) {
377 		ioc->aen_event_read_flag = 1;
378 		wake_up_interruptible(&ctl_poll_wait);
379 		if (async_queue)
380 			kill_fasync(&async_queue, SIGIO, POLL_IN);
381 	}
382 }
383 
384 /**
385  * mpt3sas_ctl_event_callback - firmware event handler (called at ISR time)
386  * @ioc: per adapter object
387  * @msix_index: MSIX table index supplied by the OS
388  * @reply: reply message frame(lower 32bit addr)
389  * Context: interrupt.
390  *
391  * This function merely adds a new work task into ioc->firmware_event_thread.
392  * The tasks are worked from _firmware_event_work in user context.
393  *
394  * Return: 1 meaning mf should be freed from _base_interrupt
395  *         0 means the mf is freed from this function.
396  */
397 u8
mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER * ioc,u8 msix_index,u32 reply)398 mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
399 	u32 reply)
400 {
401 	Mpi2EventNotificationReply_t *mpi_reply;
402 
403 	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
404 	if (mpi_reply)
405 		mpt3sas_ctl_add_to_event_log(ioc, mpi_reply);
406 	return 1;
407 }
408 
409 /**
410  * _ctl_verify_adapter - validates ioc_number passed from application
411  * @ioc_number: ?
412  * @iocpp: The ioc pointer is returned in this.
413  * @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
414  * MPI25_VERSION | MPI26_VERSION for mpt3ctl ioctl device.
415  *
416  * Return: (-1) means error, else ioc_number.
417  */
418 static int
_ctl_verify_adapter(int ioc_number,struct MPT3SAS_ADAPTER ** iocpp,int mpi_version)419 _ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp,
420 							int mpi_version)
421 {
422 	struct MPT3SAS_ADAPTER *ioc;
423 	int version = 0;
424 	/* global ioc lock to protect controller on list operations */
425 	spin_lock(&gioc_lock);
426 	list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
427 		if (ioc->id != ioc_number)
428 			continue;
429 		/* Check whether this ioctl command is from right
430 		 * ioctl device or not, if not continue the search.
431 		 */
432 		version = ioc->hba_mpi_version_belonged;
433 		/* MPI25_VERSION and MPI26_VERSION uses same ioctl
434 		 * device.
435 		 */
436 		if (mpi_version == (MPI25_VERSION | MPI26_VERSION)) {
437 			if ((version == MPI25_VERSION) ||
438 				(version == MPI26_VERSION))
439 				goto out;
440 			else
441 				continue;
442 		} else {
443 			if (version != mpi_version)
444 				continue;
445 		}
446 out:
447 		spin_unlock(&gioc_lock);
448 		*iocpp = ioc;
449 		return ioc_number;
450 	}
451 	spin_unlock(&gioc_lock);
452 	*iocpp = NULL;
453 	return -1;
454 }
455 
456 /**
457  * mpt3sas_ctl_pre_reset_handler - reset callback handler (for ctl)
458  * @ioc: per adapter object
459  *
460  * The handler for doing any required cleanup or initialization.
461  */
mpt3sas_ctl_pre_reset_handler(struct MPT3SAS_ADAPTER * ioc)462 void mpt3sas_ctl_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc)
463 {
464 	int i;
465 	u8 issue_reset;
466 
467 	dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_PRE_RESET\n", __func__));
468 	for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
469 		if (!(ioc->diag_buffer_status[i] &
470 		      MPT3_DIAG_BUFFER_IS_REGISTERED))
471 			continue;
472 		if ((ioc->diag_buffer_status[i] &
473 		     MPT3_DIAG_BUFFER_IS_RELEASED))
474 			continue;
475 
476 		/*
477 		 * add a log message to indicate the release
478 		 */
479 		ioc_info(ioc,
480 		    "%s: Releasing the trace buffer due to adapter reset.",
481 		    __func__);
482 		ioc->htb_rel.buffer_rel_condition =
483 		    MPT3_DIAG_BUFFER_REL_TRIGGER;
484 		mpt3sas_send_diag_release(ioc, i, &issue_reset);
485 	}
486 }
487 
488 /**
489  * mpt3sas_ctl_clear_outstanding_ioctls - clears outstanding ioctl cmd.
490  * @ioc: per adapter object
491  *
492  * The handler for doing any required cleanup or initialization.
493  */
mpt3sas_ctl_clear_outstanding_ioctls(struct MPT3SAS_ADAPTER * ioc)494 void mpt3sas_ctl_clear_outstanding_ioctls(struct MPT3SAS_ADAPTER *ioc)
495 {
496 	dtmprintk(ioc,
497 	    ioc_info(ioc, "%s: clear outstanding ioctl cmd\n", __func__));
498 	if (ioc->ctl_cmds.status & MPT3_CMD_PENDING) {
499 		ioc->ctl_cmds.status |= MPT3_CMD_RESET;
500 		mpt3sas_base_free_smid(ioc, ioc->ctl_cmds.smid);
501 		complete(&ioc->ctl_cmds.done);
502 	}
503 }
504 
505 /**
506  * mpt3sas_ctl_reset_done_handler - reset callback handler (for ctl)
507  * @ioc: per adapter object
508  *
509  * The handler for doing any required cleanup or initialization.
510  */
mpt3sas_ctl_reset_done_handler(struct MPT3SAS_ADAPTER * ioc)511 void mpt3sas_ctl_reset_done_handler(struct MPT3SAS_ADAPTER *ioc)
512 {
513 	int i;
514 
515 	dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__));
516 
517 	for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
518 		if (!(ioc->diag_buffer_status[i] &
519 		      MPT3_DIAG_BUFFER_IS_REGISTERED))
520 			continue;
521 		if ((ioc->diag_buffer_status[i] &
522 		     MPT3_DIAG_BUFFER_IS_RELEASED))
523 			continue;
524 		ioc->diag_buffer_status[i] |=
525 			MPT3_DIAG_BUFFER_IS_DIAG_RESET;
526 	}
527 }
528 
529 /**
530  * _ctl_fasync -
531  * @fd: ?
532  * @filep: ?
533  * @mode: ?
534  *
535  * Called when application request fasyn callback handler.
536  */
537 static int
_ctl_fasync(int fd,struct file * filep,int mode)538 _ctl_fasync(int fd, struct file *filep, int mode)
539 {
540 	return fasync_helper(fd, filep, mode, &async_queue);
541 }
542 
543 /**
544  * _ctl_poll -
545  * @filep: ?
546  * @wait: ?
547  *
548  */
549 static __poll_t
_ctl_poll(struct file * filep,poll_table * wait)550 _ctl_poll(struct file *filep, poll_table *wait)
551 {
552 	struct MPT3SAS_ADAPTER *ioc;
553 
554 	poll_wait(filep, &ctl_poll_wait, wait);
555 
556 	/* global ioc lock to protect controller on list operations */
557 	spin_lock(&gioc_lock);
558 	list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
559 		if (ioc->aen_event_read_flag) {
560 			spin_unlock(&gioc_lock);
561 			return EPOLLIN | EPOLLRDNORM;
562 		}
563 	}
564 	spin_unlock(&gioc_lock);
565 	return 0;
566 }
567 
568 /**
569  * _ctl_set_task_mid - assign an active smid to tm request
570  * @ioc: per adapter object
571  * @karg: (struct mpt3_ioctl_command)
572  * @tm_request: pointer to mf from user space
573  *
574  * Return: 0 when an smid if found, else fail.
575  * during failure, the reply frame is filled.
576  */
577 static int
_ctl_set_task_mid(struct MPT3SAS_ADAPTER * ioc,struct mpt3_ioctl_command * karg,Mpi2SCSITaskManagementRequest_t * tm_request)578 _ctl_set_task_mid(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command *karg,
579 	Mpi2SCSITaskManagementRequest_t *tm_request)
580 {
581 	bool found = false;
582 	u16 smid;
583 	u16 handle;
584 	struct scsi_cmnd *scmd;
585 	struct MPT3SAS_DEVICE *priv_data;
586 	Mpi2SCSITaskManagementReply_t *tm_reply;
587 	u32 sz;
588 	u32 lun;
589 	char *desc = NULL;
590 
591 	if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
592 		desc = "abort_task";
593 	else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
594 		desc = "query_task";
595 	else
596 		return 0;
597 
598 	lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
599 
600 	handle = le16_to_cpu(tm_request->DevHandle);
601 	for (smid = ioc->scsiio_depth; smid && !found; smid--) {
602 		struct scsiio_tracker *st;
603 		__le16 task_mid;
604 
605 		scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
606 		if (!scmd)
607 			continue;
608 		if (lun != scmd->device->lun)
609 			continue;
610 		priv_data = scmd->device->hostdata;
611 		if (priv_data->sas_target == NULL)
612 			continue;
613 		if (priv_data->sas_target->handle != handle)
614 			continue;
615 		st = scsi_cmd_priv(scmd);
616 
617 		/*
618 		 * If the given TaskMID from the user space is zero, then the
619 		 * first outstanding smid will be picked up.  Otherwise,
620 		 * targeted smid will be the one.
621 		 */
622 		task_mid = cpu_to_le16(st->smid);
623 		if (!tm_request->TaskMID)
624 			tm_request->TaskMID = task_mid;
625 		found = tm_request->TaskMID == task_mid;
626 	}
627 
628 	if (!found) {
629 		dctlprintk(ioc,
630 			   ioc_info(ioc, "%s: handle(0x%04x), lun(%d), no active mid!!\n",
631 				    desc, le16_to_cpu(tm_request->DevHandle),
632 				    lun));
633 		tm_reply = ioc->ctl_cmds.reply;
634 		tm_reply->DevHandle = tm_request->DevHandle;
635 		tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
636 		tm_reply->TaskType = tm_request->TaskType;
637 		tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
638 		tm_reply->VP_ID = tm_request->VP_ID;
639 		tm_reply->VF_ID = tm_request->VF_ID;
640 		sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz);
641 		if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply,
642 		    sz))
643 			pr_err("failure at %s:%d/%s()!\n", __FILE__,
644 			    __LINE__, __func__);
645 		return 1;
646 	}
647 
648 	dctlprintk(ioc,
649 		   ioc_info(ioc, "%s: handle(0x%04x), lun(%d), task_mid(%d)\n",
650 			    desc, le16_to_cpu(tm_request->DevHandle), lun,
651 			    le16_to_cpu(tm_request->TaskMID)));
652 	return 0;
653 }
654 
655 /**
656  * _ctl_do_mpt_command - main handler for MPT3COMMAND opcode
657  * @ioc: per adapter object
658  * @karg: (struct mpt3_ioctl_command)
659  * @mf: pointer to mf in user space
660  */
661 static long
_ctl_do_mpt_command(struct MPT3SAS_ADAPTER * ioc,struct mpt3_ioctl_command karg,void __user * mf)662 _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
663 	void __user *mf)
664 {
665 	MPI2RequestHeader_t *mpi_request = NULL, *request;
666 	MPI2DefaultReply_t *mpi_reply;
667 	Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request = NULL;
668 	struct _pcie_device *pcie_device = NULL;
669 	u16 smid;
670 	unsigned long timeout;
671 	u8 issue_reset;
672 	u32 sz, sz_arg;
673 	void *psge;
674 	void *data_out = NULL;
675 	dma_addr_t data_out_dma = 0;
676 	size_t data_out_sz = 0;
677 	void *data_in = NULL;
678 	dma_addr_t data_in_dma = 0;
679 	size_t data_in_sz = 0;
680 	long ret;
681 	u16 device_handle = MPT3SAS_INVALID_DEVICE_HANDLE;
682 
683 	issue_reset = 0;
684 
685 	if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
686 		ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
687 		ret = -EAGAIN;
688 		goto out;
689 	}
690 
691 	ret = mpt3sas_wait_for_ioc(ioc,	IOC_OPERATIONAL_WAIT_COUNT);
692 	if (ret)
693 		goto out;
694 
695 	mpi_request = kzalloc(ioc->request_sz, GFP_KERNEL);
696 	if (!mpi_request) {
697 		ioc_err(ioc, "%s: failed obtaining a memory for mpi_request\n",
698 			__func__);
699 		ret = -ENOMEM;
700 		goto out;
701 	}
702 
703 	/* Check for overflow and wraparound */
704 	if (karg.data_sge_offset * 4 > ioc->request_sz ||
705 	    karg.data_sge_offset > (UINT_MAX / 4)) {
706 		ret = -EINVAL;
707 		goto out;
708 	}
709 
710 	/* copy in request message frame from user */
711 	if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) {
712 		pr_err("failure at %s:%d/%s()!\n", __FILE__, __LINE__,
713 		    __func__);
714 		ret = -EFAULT;
715 		goto out;
716 	}
717 
718 	if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
719 		smid = mpt3sas_base_get_smid_hpr(ioc, ioc->ctl_cb_idx);
720 		if (!smid) {
721 			ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
722 			ret = -EAGAIN;
723 			goto out;
724 		}
725 	} else {
726 		/* Use first reserved smid for passthrough ioctls */
727 		smid = ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT + 1;
728 	}
729 
730 	ret = 0;
731 	ioc->ctl_cmds.status = MPT3_CMD_PENDING;
732 	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
733 	request = mpt3sas_base_get_msg_frame(ioc, smid);
734 	memset(request, 0, ioc->request_sz);
735 	memcpy(request, mpi_request, karg.data_sge_offset*4);
736 	ioc->ctl_cmds.smid = smid;
737 	data_out_sz = karg.data_out_size;
738 	data_in_sz = karg.data_in_size;
739 
740 	if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
741 	    mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
742 	    mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT ||
743 	    mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH ||
744 	    mpi_request->Function == MPI2_FUNCTION_NVME_ENCAPSULATED) {
745 
746 		device_handle = le16_to_cpu(mpi_request->FunctionDependent1);
747 		if (!device_handle || (device_handle >
748 		    ioc->facts.MaxDevHandle)) {
749 			ret = -EINVAL;
750 			mpt3sas_base_free_smid(ioc, smid);
751 			goto out;
752 		}
753 	}
754 
755 	/* obtain dma-able memory for data transfer */
756 	if (data_out_sz) /* WRITE */ {
757 		data_out = dma_alloc_coherent(&ioc->pdev->dev, data_out_sz,
758 				&data_out_dma, GFP_KERNEL);
759 		if (!data_out) {
760 			pr_err("failure at %s:%d/%s()!\n", __FILE__,
761 			    __LINE__, __func__);
762 			ret = -ENOMEM;
763 			mpt3sas_base_free_smid(ioc, smid);
764 			goto out;
765 		}
766 		if (copy_from_user(data_out, karg.data_out_buf_ptr,
767 			data_out_sz)) {
768 			pr_err("failure at %s:%d/%s()!\n", __FILE__,
769 			    __LINE__, __func__);
770 			ret =  -EFAULT;
771 			mpt3sas_base_free_smid(ioc, smid);
772 			goto out;
773 		}
774 	}
775 
776 	if (data_in_sz) /* READ */ {
777 		data_in = dma_alloc_coherent(&ioc->pdev->dev, data_in_sz,
778 				&data_in_dma, GFP_KERNEL);
779 		if (!data_in) {
780 			pr_err("failure at %s:%d/%s()!\n", __FILE__,
781 			    __LINE__, __func__);
782 			ret = -ENOMEM;
783 			mpt3sas_base_free_smid(ioc, smid);
784 			goto out;
785 		}
786 	}
787 
788 	psge = (void *)request + (karg.data_sge_offset*4);
789 
790 	/* send command to firmware */
791 	_ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
792 
793 	init_completion(&ioc->ctl_cmds.done);
794 	switch (mpi_request->Function) {
795 	case MPI2_FUNCTION_NVME_ENCAPSULATED:
796 	{
797 		nvme_encap_request = (Mpi26NVMeEncapsulatedRequest_t *)request;
798 		if (!ioc->pcie_sg_lookup) {
799 			dtmprintk(ioc, ioc_info(ioc,
800 			    "HBA doesn't support NVMe. Rejecting NVMe Encapsulated request.\n"
801 			    ));
802 
803 			if (ioc->logging_level & MPT_DEBUG_TM)
804 				_debug_dump_mf(nvme_encap_request,
805 				    ioc->request_sz/4);
806 			mpt3sas_base_free_smid(ioc, smid);
807 			ret = -EINVAL;
808 			goto out;
809 		}
810 		/*
811 		 * Get the Physical Address of the sense buffer.
812 		 * Use Error Response buffer address field to hold the sense
813 		 * buffer address.
814 		 * Clear the internal sense buffer, which will potentially hold
815 		 * the Completion Queue Entry on return, or 0 if no Entry.
816 		 * Build the PRPs and set direction bits.
817 		 * Send the request.
818 		 */
819 		nvme_encap_request->ErrorResponseBaseAddress =
820 		    cpu_to_le64(ioc->sense_dma & 0xFFFFFFFF00000000UL);
821 		nvme_encap_request->ErrorResponseBaseAddress |=
822 		   cpu_to_le64(le32_to_cpu(
823 		   mpt3sas_base_get_sense_buffer_dma(ioc, smid)));
824 		nvme_encap_request->ErrorResponseAllocationLength =
825 					cpu_to_le16(NVME_ERROR_RESPONSE_SIZE);
826 		memset(ioc->ctl_cmds.sense, 0, NVME_ERROR_RESPONSE_SIZE);
827 		ioc->build_nvme_prp(ioc, smid, nvme_encap_request,
828 		    data_out_dma, data_out_sz, data_in_dma, data_in_sz);
829 		if (test_bit(device_handle, ioc->device_remove_in_progress)) {
830 			dtmprintk(ioc,
831 				  ioc_info(ioc, "handle(0x%04x): ioctl failed due to device removal in progress\n",
832 					   device_handle));
833 			mpt3sas_base_free_smid(ioc, smid);
834 			ret = -EINVAL;
835 			goto out;
836 		}
837 		mpt3sas_base_put_smid_nvme_encap(ioc, smid);
838 		break;
839 	}
840 	case MPI2_FUNCTION_SCSI_IO_REQUEST:
841 	case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
842 	{
843 		Mpi2SCSIIORequest_t *scsiio_request =
844 		    (Mpi2SCSIIORequest_t *)request;
845 		scsiio_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
846 		scsiio_request->SenseBufferLowAddress =
847 		    mpt3sas_base_get_sense_buffer_dma(ioc, smid);
848 		memset(ioc->ctl_cmds.sense, 0, SCSI_SENSE_BUFFERSIZE);
849 		if (test_bit(device_handle, ioc->device_remove_in_progress)) {
850 			dtmprintk(ioc,
851 				  ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
852 					   device_handle));
853 			mpt3sas_base_free_smid(ioc, smid);
854 			ret = -EINVAL;
855 			goto out;
856 		}
857 		ioc->build_sg(ioc, psge, data_out_dma, data_out_sz,
858 		    data_in_dma, data_in_sz);
859 		if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)
860 			ioc->put_smid_scsi_io(ioc, smid, device_handle);
861 		else
862 			ioc->put_smid_default(ioc, smid);
863 		break;
864 	}
865 	case MPI2_FUNCTION_SCSI_TASK_MGMT:
866 	{
867 		Mpi2SCSITaskManagementRequest_t *tm_request =
868 		    (Mpi2SCSITaskManagementRequest_t *)request;
869 
870 		dtmprintk(ioc,
871 			  ioc_info(ioc, "TASK_MGMT: handle(0x%04x), task_type(0x%02x)\n",
872 				   le16_to_cpu(tm_request->DevHandle),
873 				   tm_request->TaskType));
874 		ioc->got_task_abort_from_ioctl = 1;
875 		if (tm_request->TaskType ==
876 		    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
877 		    tm_request->TaskType ==
878 		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
879 			if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
880 				mpt3sas_base_free_smid(ioc, smid);
881 				ioc->got_task_abort_from_ioctl = 0;
882 				goto out;
883 			}
884 		}
885 		ioc->got_task_abort_from_ioctl = 0;
886 
887 		if (test_bit(device_handle, ioc->device_remove_in_progress)) {
888 			dtmprintk(ioc,
889 				  ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
890 					   device_handle));
891 			mpt3sas_base_free_smid(ioc, smid);
892 			ret = -EINVAL;
893 			goto out;
894 		}
895 		mpt3sas_scsih_set_tm_flag(ioc, le16_to_cpu(
896 		    tm_request->DevHandle));
897 		ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
898 		    data_in_dma, data_in_sz);
899 		ioc->put_smid_hi_priority(ioc, smid, 0);
900 		break;
901 	}
902 	case MPI2_FUNCTION_SMP_PASSTHROUGH:
903 	{
904 		Mpi2SmpPassthroughRequest_t *smp_request =
905 		    (Mpi2SmpPassthroughRequest_t *)mpi_request;
906 		u8 *data;
907 
908 		if (!ioc->multipath_on_hba) {
909 			/* ioc determines which port to use */
910 			smp_request->PhysicalPort = 0xFF;
911 		}
912 		if (smp_request->PassthroughFlags &
913 		    MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE)
914 			data = (u8 *)&smp_request->SGL;
915 		else {
916 			if (unlikely(data_out == NULL)) {
917 				pr_err("failure at %s:%d/%s()!\n",
918 				    __FILE__, __LINE__, __func__);
919 				mpt3sas_base_free_smid(ioc, smid);
920 				ret = -EINVAL;
921 				goto out;
922 			}
923 			data = data_out;
924 		}
925 
926 		if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) {
927 			ioc->ioc_link_reset_in_progress = 1;
928 			ioc->ignore_loginfos = 1;
929 		}
930 		ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
931 		    data_in_sz);
932 		ioc->put_smid_default(ioc, smid);
933 		break;
934 	}
935 	case MPI2_FUNCTION_SATA_PASSTHROUGH:
936 	{
937 		if (test_bit(device_handle, ioc->device_remove_in_progress)) {
938 			dtmprintk(ioc,
939 				  ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
940 					   device_handle));
941 			mpt3sas_base_free_smid(ioc, smid);
942 			ret = -EINVAL;
943 			goto out;
944 		}
945 		ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
946 		    data_in_sz);
947 		ioc->put_smid_default(ioc, smid);
948 		break;
949 	}
950 	case MPI2_FUNCTION_FW_DOWNLOAD:
951 	{
952 		if (ioc->pdev->vendor == MPI2_MFGPAGE_VENDORID_ATTO) {
953 			ioc_info(ioc, "Firmware download not supported for ATTO HBA.\n");
954 			ret = -EPERM;
955 			break;
956 		}
957 		fallthrough;
958 	}
959 	case MPI2_FUNCTION_FW_UPLOAD:
960 	{
961 		ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
962 		    data_in_sz);
963 		ioc->put_smid_default(ioc, smid);
964 		break;
965 	}
966 	case MPI2_FUNCTION_TOOLBOX:
967 	{
968 		Mpi2ToolboxCleanRequest_t *toolbox_request =
969 			(Mpi2ToolboxCleanRequest_t *)mpi_request;
970 
971 		if ((toolbox_request->Tool == MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL)
972 		    || (toolbox_request->Tool ==
973 		    MPI26_TOOLBOX_BACKEND_PCIE_LANE_MARGIN))
974 			ioc->build_sg(ioc, psge, data_out_dma, data_out_sz,
975 				data_in_dma, data_in_sz);
976 		else if (toolbox_request->Tool ==
977 				MPI2_TOOLBOX_MEMORY_MOVE_TOOL) {
978 			Mpi2ToolboxMemMoveRequest_t *mem_move_request =
979 					(Mpi2ToolboxMemMoveRequest_t *)request;
980 			Mpi2SGESimple64_t tmp, *src = NULL, *dst = NULL;
981 
982 			ioc->build_sg_mpi(ioc, psge, data_out_dma,
983 					data_out_sz, data_in_dma, data_in_sz);
984 			if (data_out_sz && !data_in_sz) {
985 				dst =
986 				    (Mpi2SGESimple64_t *)&mem_move_request->SGL;
987 				src = (void *)dst + ioc->sge_size;
988 
989 				memcpy(&tmp, src, ioc->sge_size);
990 				memcpy(src, dst, ioc->sge_size);
991 				memcpy(dst, &tmp, ioc->sge_size);
992 			}
993 			if (ioc->logging_level & MPT_DEBUG_TM) {
994 				ioc_info(ioc,
995 				  "Mpi2ToolboxMemMoveRequest_t request msg\n");
996 				_debug_dump_mf(mem_move_request,
997 							ioc->request_sz/4);
998 			}
999 		} else
1000 			ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
1001 			    data_in_dma, data_in_sz);
1002 		ioc->put_smid_default(ioc, smid);
1003 		break;
1004 	}
1005 	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
1006 	{
1007 		Mpi2SasIoUnitControlRequest_t *sasiounit_request =
1008 		    (Mpi2SasIoUnitControlRequest_t *)mpi_request;
1009 
1010 		if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET
1011 		    || sasiounit_request->Operation ==
1012 		    MPI2_SAS_OP_PHY_LINK_RESET) {
1013 			ioc->ioc_link_reset_in_progress = 1;
1014 			ioc->ignore_loginfos = 1;
1015 		}
1016 		/* drop to default case for posting the request */
1017 	}
1018 		fallthrough;
1019 	default:
1020 		ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
1021 		    data_in_dma, data_in_sz);
1022 		ioc->put_smid_default(ioc, smid);
1023 		break;
1024 	}
1025 
1026 	if (karg.timeout < MPT3_IOCTL_DEFAULT_TIMEOUT)
1027 		timeout = MPT3_IOCTL_DEFAULT_TIMEOUT;
1028 	else
1029 		timeout = karg.timeout;
1030 	wait_for_completion_timeout(&ioc->ctl_cmds.done, timeout*HZ);
1031 	if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
1032 		Mpi2SCSITaskManagementRequest_t *tm_request =
1033 		    (Mpi2SCSITaskManagementRequest_t *)mpi_request;
1034 		mpt3sas_scsih_clear_tm_flag(ioc, le16_to_cpu(
1035 		    tm_request->DevHandle));
1036 		mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
1037 	} else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH ||
1038 	    mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) &&
1039 		ioc->ioc_link_reset_in_progress) {
1040 		ioc->ioc_link_reset_in_progress = 0;
1041 		ioc->ignore_loginfos = 0;
1042 	}
1043 	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
1044 		mpt3sas_check_cmd_timeout(ioc,
1045 		    ioc->ctl_cmds.status, mpi_request,
1046 		    karg.data_sge_offset, issue_reset);
1047 		goto issue_host_reset;
1048 	}
1049 
1050 	mpi_reply = ioc->ctl_cmds.reply;
1051 
1052 	if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
1053 	    (ioc->logging_level & MPT_DEBUG_TM)) {
1054 		Mpi2SCSITaskManagementReply_t *tm_reply =
1055 		    (Mpi2SCSITaskManagementReply_t *)mpi_reply;
1056 
1057 		ioc_info(ioc, "TASK_MGMT: IOCStatus(0x%04x), IOCLogInfo(0x%08x), TerminationCount(0x%08x)\n",
1058 			 le16_to_cpu(tm_reply->IOCStatus),
1059 			 le32_to_cpu(tm_reply->IOCLogInfo),
1060 			 le32_to_cpu(tm_reply->TerminationCount));
1061 	}
1062 
1063 	/* copy out xdata to user */
1064 	if (data_in_sz) {
1065 		if (copy_to_user(karg.data_in_buf_ptr, data_in,
1066 		    data_in_sz)) {
1067 			pr_err("failure at %s:%d/%s()!\n", __FILE__,
1068 			    __LINE__, __func__);
1069 			ret = -ENODATA;
1070 			goto out;
1071 		}
1072 	}
1073 
1074 	/* copy out reply message frame to user */
1075 	if (karg.max_reply_bytes) {
1076 		sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz);
1077 		if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply,
1078 		    sz)) {
1079 			pr_err("failure at %s:%d/%s()!\n", __FILE__,
1080 			    __LINE__, __func__);
1081 			ret = -ENODATA;
1082 			goto out;
1083 		}
1084 	}
1085 
1086 	/* copy out sense/NVMe Error Response to user */
1087 	if (karg.max_sense_bytes && (mpi_request->Function ==
1088 	    MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function ==
1089 	    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || mpi_request->Function ==
1090 	    MPI2_FUNCTION_NVME_ENCAPSULATED)) {
1091 		if (karg.sense_data_ptr == NULL) {
1092 			ioc_info(ioc, "Response buffer provided by application is NULL; Response data will not be returned\n");
1093 			goto out;
1094 		}
1095 		sz_arg = (mpi_request->Function ==
1096 		MPI2_FUNCTION_NVME_ENCAPSULATED) ? NVME_ERROR_RESPONSE_SIZE :
1097 							SCSI_SENSE_BUFFERSIZE;
1098 		sz = min_t(u32, karg.max_sense_bytes, sz_arg);
1099 		if (copy_to_user(karg.sense_data_ptr, ioc->ctl_cmds.sense,
1100 		    sz)) {
1101 			pr_err("failure at %s:%d/%s()!\n", __FILE__,
1102 				__LINE__, __func__);
1103 			ret = -ENODATA;
1104 			goto out;
1105 		}
1106 	}
1107 
1108  issue_host_reset:
1109 	if (issue_reset) {
1110 		ret = -ENODATA;
1111 		if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
1112 		    mpi_request->Function ==
1113 		    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
1114 		    mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH)) {
1115 			ioc_info(ioc, "issue target reset: handle = (0x%04x)\n",
1116 				 le16_to_cpu(mpi_request->FunctionDependent1));
1117 			mpt3sas_halt_firmware(ioc);
1118 			pcie_device = mpt3sas_get_pdev_by_handle(ioc,
1119 				le16_to_cpu(mpi_request->FunctionDependent1));
1120 			if (pcie_device && (!ioc->tm_custom_handling) &&
1121 			    (!(mpt3sas_scsih_is_pcie_scsi_device(
1122 			    pcie_device->device_info))))
1123 				mpt3sas_scsih_issue_locked_tm(ioc,
1124 				  le16_to_cpu(mpi_request->FunctionDependent1),
1125 				  0, 0, 0,
1126 				  MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
1127 				  0, pcie_device->reset_timeout,
1128 			MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE);
1129 			else
1130 				mpt3sas_scsih_issue_locked_tm(ioc,
1131 				  le16_to_cpu(mpi_request->FunctionDependent1),
1132 				  0, 0, 0,
1133 				  MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
1134 				  0, 30, MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET);
1135 		} else
1136 			mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
1137 	}
1138 
1139  out:
1140 	if (pcie_device)
1141 		pcie_device_put(pcie_device);
1142 
1143 	/* free memory associated with sg buffers */
1144 	if (data_in)
1145 		dma_free_coherent(&ioc->pdev->dev, data_in_sz, data_in,
1146 		    data_in_dma);
1147 
1148 	if (data_out)
1149 		dma_free_coherent(&ioc->pdev->dev, data_out_sz, data_out,
1150 		    data_out_dma);
1151 
1152 	kfree(mpi_request);
1153 	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
1154 	return ret;
1155 }
1156 
1157 /**
1158  * _ctl_getiocinfo - main handler for MPT3IOCINFO opcode
1159  * @ioc: per adapter object
1160  * @arg: user space buffer containing ioctl content
1161  */
1162 static long
_ctl_getiocinfo(struct MPT3SAS_ADAPTER * ioc,void __user * arg)1163 _ctl_getiocinfo(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1164 {
1165 	struct mpt3_ioctl_iocinfo karg;
1166 
1167 	dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
1168 				 __func__));
1169 
1170 	memset(&karg, 0 , sizeof(karg));
1171 	if (ioc->pfacts)
1172 		karg.port_number = ioc->pfacts[0].PortNumber;
1173 	karg.hw_rev = ioc->pdev->revision;
1174 	karg.pci_id = ioc->pdev->device;
1175 	karg.subsystem_device = ioc->pdev->subsystem_device;
1176 	karg.subsystem_vendor = ioc->pdev->subsystem_vendor;
1177 	karg.pci_information.u.bits.bus = ioc->pdev->bus->number;
1178 	karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn);
1179 	karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
1180 	karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
1181 	karg.firmware_version = ioc->facts.FWVersion.Word;
1182 	strcpy(karg.driver_version, ioc->driver_name);
1183 	strcat(karg.driver_version, "-");
1184 	switch  (ioc->hba_mpi_version_belonged) {
1185 	case MPI2_VERSION:
1186 		if (ioc->is_warpdrive)
1187 			karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200;
1188 		else
1189 			karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
1190 		strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
1191 		break;
1192 	case MPI25_VERSION:
1193 	case MPI26_VERSION:
1194 		if (ioc->is_gen35_ioc)
1195 			karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS35;
1196 		else
1197 			karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS3;
1198 		strcat(karg.driver_version, MPT3SAS_DRIVER_VERSION);
1199 		break;
1200 	}
1201 	karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
1202 
1203 	if (copy_to_user(arg, &karg, sizeof(karg))) {
1204 		pr_err("failure at %s:%d/%s()!\n",
1205 		    __FILE__, __LINE__, __func__);
1206 		return -EFAULT;
1207 	}
1208 	return 0;
1209 }
1210 
1211 /**
1212  * _ctl_eventquery - main handler for MPT3EVENTQUERY opcode
1213  * @ioc: per adapter object
1214  * @arg: user space buffer containing ioctl content
1215  */
1216 static long
_ctl_eventquery(struct MPT3SAS_ADAPTER * ioc,void __user * arg)1217 _ctl_eventquery(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1218 {
1219 	struct mpt3_ioctl_eventquery karg;
1220 
1221 	if (copy_from_user(&karg, arg, sizeof(karg))) {
1222 		pr_err("failure at %s:%d/%s()!\n",
1223 		    __FILE__, __LINE__, __func__);
1224 		return -EFAULT;
1225 	}
1226 
1227 	dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
1228 				 __func__));
1229 
1230 	karg.event_entries = MPT3SAS_CTL_EVENT_LOG_SIZE;
1231 	memcpy(karg.event_types, ioc->event_type,
1232 	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
1233 
1234 	if (copy_to_user(arg, &karg, sizeof(karg))) {
1235 		pr_err("failure at %s:%d/%s()!\n",
1236 		    __FILE__, __LINE__, __func__);
1237 		return -EFAULT;
1238 	}
1239 	return 0;
1240 }
1241 
1242 /**
1243  * _ctl_eventenable - main handler for MPT3EVENTENABLE opcode
1244  * @ioc: per adapter object
1245  * @arg: user space buffer containing ioctl content
1246  */
1247 static long
_ctl_eventenable(struct MPT3SAS_ADAPTER * ioc,void __user * arg)1248 _ctl_eventenable(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1249 {
1250 	struct mpt3_ioctl_eventenable karg;
1251 
1252 	if (copy_from_user(&karg, arg, sizeof(karg))) {
1253 		pr_err("failure at %s:%d/%s()!\n",
1254 		    __FILE__, __LINE__, __func__);
1255 		return -EFAULT;
1256 	}
1257 
1258 	dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
1259 				 __func__));
1260 
1261 	memcpy(ioc->event_type, karg.event_types,
1262 	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
1263 	mpt3sas_base_validate_event_type(ioc, ioc->event_type);
1264 
1265 	if (ioc->event_log)
1266 		return 0;
1267 	/* initialize event_log */
1268 	ioc->event_context = 0;
1269 	ioc->aen_event_read_flag = 0;
1270 	ioc->event_log = kcalloc(MPT3SAS_CTL_EVENT_LOG_SIZE,
1271 	    sizeof(struct MPT3_IOCTL_EVENTS), GFP_KERNEL);
1272 	if (!ioc->event_log) {
1273 		pr_err("failure at %s:%d/%s()!\n",
1274 		    __FILE__, __LINE__, __func__);
1275 		return -ENOMEM;
1276 	}
1277 	return 0;
1278 }
1279 
1280 /**
1281  * _ctl_eventreport - main handler for MPT3EVENTREPORT opcode
1282  * @ioc: per adapter object
1283  * @arg: user space buffer containing ioctl content
1284  */
1285 static long
_ctl_eventreport(struct MPT3SAS_ADAPTER * ioc,void __user * arg)1286 _ctl_eventreport(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1287 {
1288 	struct mpt3_ioctl_eventreport karg;
1289 	u32 number_bytes, max_events, max;
1290 	struct mpt3_ioctl_eventreport __user *uarg = arg;
1291 
1292 	if (copy_from_user(&karg, arg, sizeof(karg))) {
1293 		pr_err("failure at %s:%d/%s()!\n",
1294 		    __FILE__, __LINE__, __func__);
1295 		return -EFAULT;
1296 	}
1297 
1298 	dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
1299 				 __func__));
1300 
1301 	number_bytes = karg.hdr.max_data_size -
1302 	    sizeof(struct mpt3_ioctl_header);
1303 	max_events = number_bytes/sizeof(struct MPT3_IOCTL_EVENTS);
1304 	max = min_t(u32, MPT3SAS_CTL_EVENT_LOG_SIZE, max_events);
1305 
1306 	/* If fewer than 1 event is requested, there must have
1307 	 * been some type of error.
1308 	 */
1309 	if (!max || !ioc->event_log)
1310 		return -ENODATA;
1311 
1312 	number_bytes = max * sizeof(struct MPT3_IOCTL_EVENTS);
1313 	if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) {
1314 		pr_err("failure at %s:%d/%s()!\n",
1315 		    __FILE__, __LINE__, __func__);
1316 		return -EFAULT;
1317 	}
1318 
1319 	/* reset flag so SIGIO can restart */
1320 	ioc->aen_event_read_flag = 0;
1321 	return 0;
1322 }
1323 
1324 /**
1325  * _ctl_do_reset - main handler for MPT3HARDRESET opcode
1326  * @ioc: per adapter object
1327  * @arg: user space buffer containing ioctl content
1328  */
1329 static long
_ctl_do_reset(struct MPT3SAS_ADAPTER * ioc,void __user * arg)1330 _ctl_do_reset(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1331 {
1332 	struct mpt3_ioctl_diag_reset karg;
1333 	int retval;
1334 
1335 	if (copy_from_user(&karg, arg, sizeof(karg))) {
1336 		pr_err("failure at %s:%d/%s()!\n",
1337 		    __FILE__, __LINE__, __func__);
1338 		return -EFAULT;
1339 	}
1340 
1341 	if (ioc->shost_recovery || ioc->pci_error_recovery ||
1342 	    ioc->is_driver_loading)
1343 		return -EAGAIN;
1344 
1345 	dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
1346 				 __func__));
1347 
1348 	ioc->reset_from_user = 1;
1349 	retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
1350 	ioc_info(ioc,
1351 	    "Ioctl: host reset: %s\n", ((!retval) ? "SUCCESS" : "FAILED"));
1352 	return 0;
1353 }
1354 
1355 /**
1356  * _ctl_btdh_search_sas_device - searching for sas device
1357  * @ioc: per adapter object
1358  * @btdh: btdh ioctl payload
1359  */
1360 static int
_ctl_btdh_search_sas_device(struct MPT3SAS_ADAPTER * ioc,struct mpt3_ioctl_btdh_mapping * btdh)1361 _ctl_btdh_search_sas_device(struct MPT3SAS_ADAPTER *ioc,
1362 	struct mpt3_ioctl_btdh_mapping *btdh)
1363 {
1364 	struct _sas_device *sas_device;
1365 	unsigned long flags;
1366 	int rc = 0;
1367 
1368 	if (list_empty(&ioc->sas_device_list))
1369 		return rc;
1370 
1371 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
1372 	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
1373 		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
1374 		    btdh->handle == sas_device->handle) {
1375 			btdh->bus = sas_device->channel;
1376 			btdh->id = sas_device->id;
1377 			rc = 1;
1378 			goto out;
1379 		} else if (btdh->bus == sas_device->channel && btdh->id ==
1380 		    sas_device->id && btdh->handle == 0xFFFF) {
1381 			btdh->handle = sas_device->handle;
1382 			rc = 1;
1383 			goto out;
1384 		}
1385 	}
1386  out:
1387 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1388 	return rc;
1389 }
1390 
1391 /**
1392  * _ctl_btdh_search_pcie_device - searching for pcie device
1393  * @ioc: per adapter object
1394  * @btdh: btdh ioctl payload
1395  */
1396 static int
_ctl_btdh_search_pcie_device(struct MPT3SAS_ADAPTER * ioc,struct mpt3_ioctl_btdh_mapping * btdh)1397 _ctl_btdh_search_pcie_device(struct MPT3SAS_ADAPTER *ioc,
1398 	struct mpt3_ioctl_btdh_mapping *btdh)
1399 {
1400 	struct _pcie_device *pcie_device;
1401 	unsigned long flags;
1402 	int rc = 0;
1403 
1404 	if (list_empty(&ioc->pcie_device_list))
1405 		return rc;
1406 
1407 	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
1408 	list_for_each_entry(pcie_device, &ioc->pcie_device_list, list) {
1409 		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
1410 			   btdh->handle == pcie_device->handle) {
1411 			btdh->bus = pcie_device->channel;
1412 			btdh->id = pcie_device->id;
1413 			rc = 1;
1414 			goto out;
1415 		} else if (btdh->bus == pcie_device->channel && btdh->id ==
1416 			   pcie_device->id && btdh->handle == 0xFFFF) {
1417 			btdh->handle = pcie_device->handle;
1418 			rc = 1;
1419 			goto out;
1420 		}
1421 	}
1422  out:
1423 	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
1424 	return rc;
1425 }
1426 
1427 /**
1428  * _ctl_btdh_search_raid_device - searching for raid device
1429  * @ioc: per adapter object
1430  * @btdh: btdh ioctl payload
1431  */
1432 static int
_ctl_btdh_search_raid_device(struct MPT3SAS_ADAPTER * ioc,struct mpt3_ioctl_btdh_mapping * btdh)1433 _ctl_btdh_search_raid_device(struct MPT3SAS_ADAPTER *ioc,
1434 	struct mpt3_ioctl_btdh_mapping *btdh)
1435 {
1436 	struct _raid_device *raid_device;
1437 	unsigned long flags;
1438 	int rc = 0;
1439 
1440 	if (list_empty(&ioc->raid_device_list))
1441 		return rc;
1442 
1443 	spin_lock_irqsave(&ioc->raid_device_lock, flags);
1444 	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
1445 		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
1446 		    btdh->handle == raid_device->handle) {
1447 			btdh->bus = raid_device->channel;
1448 			btdh->id = raid_device->id;
1449 			rc = 1;
1450 			goto out;
1451 		} else if (btdh->bus == raid_device->channel && btdh->id ==
1452 		    raid_device->id && btdh->handle == 0xFFFF) {
1453 			btdh->handle = raid_device->handle;
1454 			rc = 1;
1455 			goto out;
1456 		}
1457 	}
1458  out:
1459 	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1460 	return rc;
1461 }
1462 
1463 /**
1464  * _ctl_btdh_mapping - main handler for MPT3BTDHMAPPING opcode
1465  * @ioc: per adapter object
1466  * @arg: user space buffer containing ioctl content
1467  */
1468 static long
_ctl_btdh_mapping(struct MPT3SAS_ADAPTER * ioc,void __user * arg)1469 _ctl_btdh_mapping(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1470 {
1471 	struct mpt3_ioctl_btdh_mapping karg;
1472 	int rc;
1473 
1474 	if (copy_from_user(&karg, arg, sizeof(karg))) {
1475 		pr_err("failure at %s:%d/%s()!\n",
1476 		    __FILE__, __LINE__, __func__);
1477 		return -EFAULT;
1478 	}
1479 
1480 	dctlprintk(ioc, ioc_info(ioc, "%s\n",
1481 				 __func__));
1482 
1483 	rc = _ctl_btdh_search_sas_device(ioc, &karg);
1484 	if (!rc)
1485 		rc = _ctl_btdh_search_pcie_device(ioc, &karg);
1486 	if (!rc)
1487 		_ctl_btdh_search_raid_device(ioc, &karg);
1488 
1489 	if (copy_to_user(arg, &karg, sizeof(karg))) {
1490 		pr_err("failure at %s:%d/%s()!\n",
1491 		    __FILE__, __LINE__, __func__);
1492 		return -EFAULT;
1493 	}
1494 	return 0;
1495 }
1496 
1497 /**
1498  * _ctl_diag_capability - return diag buffer capability
1499  * @ioc: per adapter object
1500  * @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
1501  *
1502  * returns 1 when diag buffer support is enabled in firmware
1503  */
1504 static u8
_ctl_diag_capability(struct MPT3SAS_ADAPTER * ioc,u8 buffer_type)1505 _ctl_diag_capability(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type)
1506 {
1507 	u8 rc = 0;
1508 
1509 	switch (buffer_type) {
1510 	case MPI2_DIAG_BUF_TYPE_TRACE:
1511 		if (ioc->facts.IOCCapabilities &
1512 		    MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER)
1513 			rc = 1;
1514 		break;
1515 	case MPI2_DIAG_BUF_TYPE_SNAPSHOT:
1516 		if (ioc->facts.IOCCapabilities &
1517 		    MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER)
1518 			rc = 1;
1519 		break;
1520 	case MPI2_DIAG_BUF_TYPE_EXTENDED:
1521 		if (ioc->facts.IOCCapabilities &
1522 		    MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER)
1523 			rc = 1;
1524 	}
1525 
1526 	return rc;
1527 }
1528 
1529 /**
1530  * _ctl_diag_get_bufftype - return diag buffer type
1531  *              either TRACE, SNAPSHOT, or EXTENDED
1532  * @ioc: per adapter object
1533  * @unique_id: specifies the unique_id for the buffer
1534  *
1535  * returns MPT3_DIAG_UID_NOT_FOUND if the id not found
1536  */
1537 static u8
_ctl_diag_get_bufftype(struct MPT3SAS_ADAPTER * ioc,u32 unique_id)1538 _ctl_diag_get_bufftype(struct MPT3SAS_ADAPTER *ioc, u32 unique_id)
1539 {
1540 	u8  index;
1541 
1542 	for (index = 0; index < MPI2_DIAG_BUF_TYPE_COUNT; index++) {
1543 		if (ioc->unique_id[index] == unique_id)
1544 			return index;
1545 	}
1546 
1547 	return MPT3_DIAG_UID_NOT_FOUND;
1548 }
1549 
1550 /**
1551  * _ctl_diag_register_2 - wrapper for registering diag buffer support
1552  * @ioc: per adapter object
1553  * @diag_register: the diag_register struct passed in from user space
1554  *
1555  */
1556 static long
_ctl_diag_register_2(struct MPT3SAS_ADAPTER * ioc,struct mpt3_diag_register * diag_register)1557 _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
1558 	struct mpt3_diag_register *diag_register)
1559 {
1560 	int rc, i;
1561 	void *request_data = NULL;
1562 	dma_addr_t request_data_dma;
1563 	u32 request_data_sz = 0;
1564 	Mpi2DiagBufferPostRequest_t *mpi_request;
1565 	Mpi2DiagBufferPostReply_t *mpi_reply;
1566 	u8 buffer_type;
1567 	u16 smid;
1568 	u16 ioc_status;
1569 	u32 ioc_state;
1570 	u8 issue_reset = 0;
1571 
1572 	dctlprintk(ioc, ioc_info(ioc, "%s\n",
1573 				 __func__));
1574 
1575 	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
1576 	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
1577 		ioc_err(ioc, "%s: failed due to ioc not operational\n",
1578 			__func__);
1579 		rc = -EAGAIN;
1580 		goto out;
1581 	}
1582 
1583 	if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
1584 		ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
1585 		rc = -EAGAIN;
1586 		goto out;
1587 	}
1588 
1589 	buffer_type = diag_register->buffer_type;
1590 	if (!_ctl_diag_capability(ioc, buffer_type)) {
1591 		ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
1592 			__func__, buffer_type);
1593 		return -EPERM;
1594 	}
1595 
1596 	if (diag_register->unique_id == 0) {
1597 		ioc_err(ioc,
1598 		    "%s: Invalid UID(0x%08x), buffer_type(0x%02x)\n", __func__,
1599 		    diag_register->unique_id, buffer_type);
1600 		return -EINVAL;
1601 	}
1602 
1603 	if ((ioc->diag_buffer_status[buffer_type] &
1604 	    MPT3_DIAG_BUFFER_IS_APP_OWNED) &&
1605 	    !(ioc->diag_buffer_status[buffer_type] &
1606 	    MPT3_DIAG_BUFFER_IS_RELEASED)) {
1607 		ioc_err(ioc,
1608 		    "%s: buffer_type(0x%02x) is already registered by application with UID(0x%08x)\n",
1609 		    __func__, buffer_type, ioc->unique_id[buffer_type]);
1610 		return -EINVAL;
1611 	}
1612 
1613 	if (ioc->diag_buffer_status[buffer_type] &
1614 	    MPT3_DIAG_BUFFER_IS_REGISTERED) {
1615 		/*
1616 		 * If driver posts buffer initially, then an application wants
1617 		 * to Register that buffer (own it) without Releasing first,
1618 		 * the application Register command MUST have the same buffer
1619 		 * type and size in the Register command (obtained from the
1620 		 * Query command). Otherwise that Register command will be
1621 		 * failed. If the application has released the buffer but wants
1622 		 * to re-register it, it should be allowed as long as the
1623 		 * Unique-Id/Size match.
1624 		 */
1625 
1626 		if (ioc->unique_id[buffer_type] == MPT3DIAGBUFFUNIQUEID &&
1627 		    ioc->diag_buffer_sz[buffer_type] ==
1628 		    diag_register->requested_buffer_size) {
1629 
1630 			if (!(ioc->diag_buffer_status[buffer_type] &
1631 			     MPT3_DIAG_BUFFER_IS_RELEASED)) {
1632 				dctlprintk(ioc, ioc_info(ioc,
1633 				    "%s: diag_buffer (%d) ownership changed. old-ID(0x%08x), new-ID(0x%08x)\n",
1634 				    __func__, buffer_type,
1635 				    ioc->unique_id[buffer_type],
1636 				    diag_register->unique_id));
1637 
1638 				/*
1639 				 * Application wants to own the buffer with
1640 				 * the same size.
1641 				 */
1642 				ioc->unique_id[buffer_type] =
1643 				    diag_register->unique_id;
1644 				rc = 0; /* success */
1645 				goto out;
1646 			}
1647 		} else if (ioc->unique_id[buffer_type] !=
1648 		    MPT3DIAGBUFFUNIQUEID) {
1649 			if (ioc->unique_id[buffer_type] !=
1650 			    diag_register->unique_id ||
1651 			    ioc->diag_buffer_sz[buffer_type] !=
1652 			    diag_register->requested_buffer_size ||
1653 			    !(ioc->diag_buffer_status[buffer_type] &
1654 			    MPT3_DIAG_BUFFER_IS_RELEASED)) {
1655 				ioc_err(ioc,
1656 				    "%s: already has a registered buffer for buffer_type(0x%02x)\n",
1657 				    __func__, buffer_type);
1658 				return -EINVAL;
1659 			}
1660 		} else {
1661 			ioc_err(ioc, "%s: already has a registered buffer for buffer_type(0x%02x)\n",
1662 			    __func__, buffer_type);
1663 			return -EINVAL;
1664 		}
1665 	} else if (ioc->diag_buffer_status[buffer_type] &
1666 	    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED) {
1667 
1668 		if (ioc->unique_id[buffer_type] != MPT3DIAGBUFFUNIQUEID ||
1669 		    ioc->diag_buffer_sz[buffer_type] !=
1670 		    diag_register->requested_buffer_size) {
1671 
1672 			ioc_err(ioc,
1673 			    "%s: already a buffer is allocated for buffer_type(0x%02x) of size %d bytes, so please try registering again with same size\n",
1674 			     __func__, buffer_type,
1675 			    ioc->diag_buffer_sz[buffer_type]);
1676 			return -EINVAL;
1677 		}
1678 	}
1679 
1680 	if (diag_register->requested_buffer_size % 4)  {
1681 		ioc_err(ioc, "%s: the requested_buffer_size is not 4 byte aligned\n",
1682 			__func__);
1683 		return -EINVAL;
1684 	}
1685 
1686 	smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
1687 	if (!smid) {
1688 		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
1689 		rc = -EAGAIN;
1690 		goto out;
1691 	}
1692 
1693 	rc = 0;
1694 	ioc->ctl_cmds.status = MPT3_CMD_PENDING;
1695 	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
1696 	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
1697 	memset(mpi_request, 0, ioc->request_sz);
1698 	ioc->ctl_cmds.smid = smid;
1699 
1700 	request_data = ioc->diag_buffer[buffer_type];
1701 	request_data_sz = diag_register->requested_buffer_size;
1702 	ioc->unique_id[buffer_type] = diag_register->unique_id;
1703 	/* Reset ioc variables used for additional query commands */
1704 	ioc->reset_from_user = 0;
1705 	memset(&ioc->htb_rel, 0, sizeof(struct htb_rel_query));
1706 	ioc->diag_buffer_status[buffer_type] &=
1707 	    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
1708 	memcpy(ioc->product_specific[buffer_type],
1709 	    diag_register->product_specific, MPT3_PRODUCT_SPECIFIC_DWORDS);
1710 	ioc->diagnostic_flags[buffer_type] = diag_register->diagnostic_flags;
1711 
1712 	if (request_data) {
1713 		request_data_dma = ioc->diag_buffer_dma[buffer_type];
1714 		if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) {
1715 			dma_free_coherent(&ioc->pdev->dev,
1716 					ioc->diag_buffer_sz[buffer_type],
1717 					request_data, request_data_dma);
1718 			request_data = NULL;
1719 		}
1720 	}
1721 
1722 	if (request_data == NULL) {
1723 		ioc->diag_buffer_sz[buffer_type] = 0;
1724 		ioc->diag_buffer_dma[buffer_type] = 0;
1725 		request_data = dma_alloc_coherent(&ioc->pdev->dev,
1726 				request_data_sz, &request_data_dma, GFP_KERNEL);
1727 		if (request_data == NULL) {
1728 			ioc_err(ioc, "%s: failed allocating memory for diag buffers, requested size(%d)\n",
1729 				__func__, request_data_sz);
1730 			mpt3sas_base_free_smid(ioc, smid);
1731 			rc = -ENOMEM;
1732 			goto out;
1733 		}
1734 		ioc->diag_buffer[buffer_type] = request_data;
1735 		ioc->diag_buffer_sz[buffer_type] = request_data_sz;
1736 		ioc->diag_buffer_dma[buffer_type] = request_data_dma;
1737 	}
1738 
1739 	mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
1740 	mpi_request->BufferType = diag_register->buffer_type;
1741 	mpi_request->Flags = cpu_to_le32(diag_register->diagnostic_flags);
1742 	mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
1743 	mpi_request->BufferLength = cpu_to_le32(request_data_sz);
1744 	mpi_request->VF_ID = 0; /* TODO */
1745 	mpi_request->VP_ID = 0;
1746 
1747 	dctlprintk(ioc,
1748 		   ioc_info(ioc, "%s: diag_buffer(0x%p), dma(0x%llx), sz(%d)\n",
1749 			    __func__, request_data,
1750 			    (unsigned long long)request_data_dma,
1751 			    le32_to_cpu(mpi_request->BufferLength)));
1752 
1753 	for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
1754 		mpi_request->ProductSpecific[i] =
1755 			cpu_to_le32(ioc->product_specific[buffer_type][i]);
1756 
1757 	init_completion(&ioc->ctl_cmds.done);
1758 	ioc->put_smid_default(ioc, smid);
1759 	wait_for_completion_timeout(&ioc->ctl_cmds.done,
1760 	    MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
1761 
1762 	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
1763 		mpt3sas_check_cmd_timeout(ioc,
1764 		    ioc->ctl_cmds.status, mpi_request,
1765 		    sizeof(Mpi2DiagBufferPostRequest_t)/4, issue_reset);
1766 		goto issue_host_reset;
1767 	}
1768 
1769 	/* process the completed Reply Message Frame */
1770 	if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
1771 		ioc_err(ioc, "%s: no reply message\n", __func__);
1772 		rc = -EFAULT;
1773 		goto out;
1774 	}
1775 
1776 	mpi_reply = ioc->ctl_cmds.reply;
1777 	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
1778 
1779 	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
1780 		ioc->diag_buffer_status[buffer_type] |=
1781 			MPT3_DIAG_BUFFER_IS_REGISTERED;
1782 		dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
1783 	} else {
1784 		ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
1785 			 __func__,
1786 			 ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
1787 		rc = -EFAULT;
1788 	}
1789 
1790  issue_host_reset:
1791 	if (issue_reset)
1792 		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
1793 
1794  out:
1795 
1796 	if (rc && request_data) {
1797 		dma_free_coherent(&ioc->pdev->dev, request_data_sz,
1798 		    request_data, request_data_dma);
1799 		ioc->diag_buffer[buffer_type] = NULL;
1800 		ioc->diag_buffer_status[buffer_type] &=
1801 		    ~MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
1802 	}
1803 
1804 	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
1805 	return rc;
1806 }
1807 
1808 /**
1809  * mpt3sas_enable_diag_buffer - enabling diag_buffers support driver load time
1810  * @ioc: per adapter object
1811  * @bits_to_register: bitwise field where trace is bit 0, and snapshot is bit 1
1812  *
1813  * This is called when command line option diag_buffer_enable is enabled
1814  * at driver load time.
1815  */
1816 void
mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER * ioc,u8 bits_to_register)1817 mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc, u8 bits_to_register)
1818 {
1819 	struct mpt3_diag_register diag_register;
1820 	u32 ret_val;
1821 	u32 trace_buff_size = ioc->manu_pg11.HostTraceBufferMaxSizeKB<<10;
1822 	u32 min_trace_buff_size = 0;
1823 	u32 decr_trace_buff_size = 0;
1824 
1825 	memset(&diag_register, 0, sizeof(struct mpt3_diag_register));
1826 
1827 	if (bits_to_register & 1) {
1828 		ioc_info(ioc, "registering trace buffer support\n");
1829 		ioc->diag_trigger_master.MasterData =
1830 		    (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
1831 		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
1832 		diag_register.unique_id =
1833 		    (ioc->hba_mpi_version_belonged == MPI2_VERSION) ?
1834 		    (MPT2DIAGBUFFUNIQUEID):(MPT3DIAGBUFFUNIQUEID);
1835 
1836 		if (trace_buff_size != 0) {
1837 			diag_register.requested_buffer_size = trace_buff_size;
1838 			min_trace_buff_size =
1839 			    ioc->manu_pg11.HostTraceBufferMinSizeKB<<10;
1840 			decr_trace_buff_size =
1841 			    ioc->manu_pg11.HostTraceBufferDecrementSizeKB<<10;
1842 
1843 			if (min_trace_buff_size > trace_buff_size) {
1844 				/* The buff size is not set correctly */
1845 				ioc_err(ioc,
1846 				    "Min Trace Buff size (%d KB) greater than Max Trace Buff size (%d KB)\n",
1847 				     min_trace_buff_size>>10,
1848 				     trace_buff_size>>10);
1849 				ioc_err(ioc,
1850 				    "Using zero Min Trace Buff Size\n");
1851 				min_trace_buff_size = 0;
1852 			}
1853 
1854 			if (decr_trace_buff_size == 0) {
1855 				/*
1856 				 * retry the min size if decrement
1857 				 * is not available.
1858 				 */
1859 				decr_trace_buff_size =
1860 				    trace_buff_size - min_trace_buff_size;
1861 			}
1862 		} else {
1863 			/* register for 2MB buffers  */
1864 			diag_register.requested_buffer_size = 2 * (1024 * 1024);
1865 		}
1866 
1867 		do {
1868 			ret_val = _ctl_diag_register_2(ioc,  &diag_register);
1869 
1870 			if (ret_val == -ENOMEM && min_trace_buff_size &&
1871 			    (trace_buff_size - decr_trace_buff_size) >=
1872 			    min_trace_buff_size) {
1873 				/* adjust the buffer size */
1874 				trace_buff_size -= decr_trace_buff_size;
1875 				diag_register.requested_buffer_size =
1876 				    trace_buff_size;
1877 			} else
1878 				break;
1879 		} while (true);
1880 
1881 		if (ret_val == -ENOMEM)
1882 			ioc_err(ioc,
1883 			    "Cannot allocate trace buffer memory. Last memory tried = %d KB\n",
1884 			    diag_register.requested_buffer_size>>10);
1885 		else if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE]
1886 		    & MPT3_DIAG_BUFFER_IS_REGISTERED) {
1887 			ioc_err(ioc, "Trace buffer memory %d KB allocated\n",
1888 			    diag_register.requested_buffer_size>>10);
1889 			if (ioc->hba_mpi_version_belonged != MPI2_VERSION)
1890 				ioc->diag_buffer_status[
1891 				    MPI2_DIAG_BUF_TYPE_TRACE] |=
1892 				    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
1893 		}
1894 	}
1895 
1896 	if (bits_to_register & 2) {
1897 		ioc_info(ioc, "registering snapshot buffer support\n");
1898 		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_SNAPSHOT;
1899 		/* register for 2MB buffers  */
1900 		diag_register.requested_buffer_size = 2 * (1024 * 1024);
1901 		diag_register.unique_id = 0x7075901;
1902 		_ctl_diag_register_2(ioc,  &diag_register);
1903 	}
1904 
1905 	if (bits_to_register & 4) {
1906 		ioc_info(ioc, "registering extended buffer support\n");
1907 		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_EXTENDED;
1908 		/* register for 2MB buffers  */
1909 		diag_register.requested_buffer_size = 2 * (1024 * 1024);
1910 		diag_register.unique_id = 0x7075901;
1911 		_ctl_diag_register_2(ioc,  &diag_register);
1912 	}
1913 }
1914 
1915 /**
1916  * _ctl_diag_register - application register with driver
1917  * @ioc: per adapter object
1918  * @arg: user space buffer containing ioctl content
1919  *
1920  * This will allow the driver to setup any required buffers that will be
1921  * needed by firmware to communicate with the driver.
1922  */
1923 static long
_ctl_diag_register(struct MPT3SAS_ADAPTER * ioc,void __user * arg)1924 _ctl_diag_register(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1925 {
1926 	struct mpt3_diag_register karg;
1927 	long rc;
1928 
1929 	if (copy_from_user(&karg, arg, sizeof(karg))) {
1930 		pr_err("failure at %s:%d/%s()!\n",
1931 		    __FILE__, __LINE__, __func__);
1932 		return -EFAULT;
1933 	}
1934 
1935 	rc = _ctl_diag_register_2(ioc, &karg);
1936 
1937 	if (!rc && (ioc->diag_buffer_status[karg.buffer_type] &
1938 	    MPT3_DIAG_BUFFER_IS_REGISTERED))
1939 		ioc->diag_buffer_status[karg.buffer_type] |=
1940 		    MPT3_DIAG_BUFFER_IS_APP_OWNED;
1941 
1942 	return rc;
1943 }
1944 
1945 /**
1946  * _ctl_diag_unregister - application unregister with driver
1947  * @ioc: per adapter object
1948  * @arg: user space buffer containing ioctl content
1949  *
1950  * This will allow the driver to cleanup any memory allocated for diag
1951  * messages and to free up any resources.
1952  */
1953 static long
_ctl_diag_unregister(struct MPT3SAS_ADAPTER * ioc,void __user * arg)1954 _ctl_diag_unregister(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1955 {
1956 	struct mpt3_diag_unregister karg;
1957 	void *request_data;
1958 	dma_addr_t request_data_dma;
1959 	u32 request_data_sz;
1960 	u8 buffer_type;
1961 
1962 	if (copy_from_user(&karg, arg, sizeof(karg))) {
1963 		pr_err("failure at %s:%d/%s()!\n",
1964 		    __FILE__, __LINE__, __func__);
1965 		return -EFAULT;
1966 	}
1967 
1968 	dctlprintk(ioc, ioc_info(ioc, "%s\n",
1969 				 __func__));
1970 
1971 	buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id);
1972 	if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) {
1973 		ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n",
1974 		    __func__, karg.unique_id);
1975 		return -EINVAL;
1976 	}
1977 
1978 	if (!_ctl_diag_capability(ioc, buffer_type)) {
1979 		ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
1980 			__func__, buffer_type);
1981 		return -EPERM;
1982 	}
1983 
1984 	if ((ioc->diag_buffer_status[buffer_type] &
1985 	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
1986 		ioc_err(ioc, "%s: buffer_type(0x%02x) is not registered\n",
1987 			__func__, buffer_type);
1988 		return -EINVAL;
1989 	}
1990 	if ((ioc->diag_buffer_status[buffer_type] &
1991 	    MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
1992 		ioc_err(ioc, "%s: buffer_type(0x%02x) has not been released\n",
1993 			__func__, buffer_type);
1994 		return -EINVAL;
1995 	}
1996 
1997 	if (karg.unique_id != ioc->unique_id[buffer_type]) {
1998 		ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
1999 			__func__, karg.unique_id);
2000 		return -EINVAL;
2001 	}
2002 
2003 	request_data = ioc->diag_buffer[buffer_type];
2004 	if (!request_data) {
2005 		ioc_err(ioc, "%s: doesn't have memory allocated for buffer_type(0x%02x)\n",
2006 			__func__, buffer_type);
2007 		return -ENOMEM;
2008 	}
2009 
2010 	if (ioc->diag_buffer_status[buffer_type] &
2011 	    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED) {
2012 		ioc->unique_id[buffer_type] = MPT3DIAGBUFFUNIQUEID;
2013 		ioc->diag_buffer_status[buffer_type] &=
2014 		    ~MPT3_DIAG_BUFFER_IS_APP_OWNED;
2015 		ioc->diag_buffer_status[buffer_type] &=
2016 		    ~MPT3_DIAG_BUFFER_IS_REGISTERED;
2017 	} else {
2018 		request_data_sz = ioc->diag_buffer_sz[buffer_type];
2019 		request_data_dma = ioc->diag_buffer_dma[buffer_type];
2020 		dma_free_coherent(&ioc->pdev->dev, request_data_sz,
2021 				request_data, request_data_dma);
2022 		ioc->diag_buffer[buffer_type] = NULL;
2023 		ioc->diag_buffer_status[buffer_type] = 0;
2024 	}
2025 	return 0;
2026 }
2027 
2028 /**
2029  * _ctl_diag_query - query relevant info associated with diag buffers
2030  * @ioc: per adapter object
2031  * @arg: user space buffer containing ioctl content
2032  *
2033  * The application will send only buffer_type and unique_id.  Driver will
2034  * inspect unique_id first, if valid, fill in all the info.  If unique_id is
2035  * 0x00, the driver will return info specified by Buffer Type.
2036  */
2037 static long
_ctl_diag_query(struct MPT3SAS_ADAPTER * ioc,void __user * arg)2038 _ctl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
2039 {
2040 	struct mpt3_diag_query karg;
2041 	void *request_data;
2042 	int i;
2043 	u8 buffer_type;
2044 
2045 	if (copy_from_user(&karg, arg, sizeof(karg))) {
2046 		pr_err("failure at %s:%d/%s()!\n",
2047 		    __FILE__, __LINE__, __func__);
2048 		return -EFAULT;
2049 	}
2050 
2051 	dctlprintk(ioc, ioc_info(ioc, "%s\n",
2052 				 __func__));
2053 
2054 	karg.application_flags = 0;
2055 	buffer_type = karg.buffer_type;
2056 
2057 	if (!_ctl_diag_capability(ioc, buffer_type)) {
2058 		ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
2059 			__func__, buffer_type);
2060 		return -EPERM;
2061 	}
2062 
2063 	if (!(ioc->diag_buffer_status[buffer_type] &
2064 	    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED)) {
2065 		if ((ioc->diag_buffer_status[buffer_type] &
2066 		    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
2067 			ioc_err(ioc, "%s: buffer_type(0x%02x) is not registered\n",
2068 				__func__, buffer_type);
2069 			return -EINVAL;
2070 		}
2071 	}
2072 
2073 	if (karg.unique_id) {
2074 		if (karg.unique_id != ioc->unique_id[buffer_type]) {
2075 			ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
2076 				__func__, karg.unique_id);
2077 			return -EINVAL;
2078 		}
2079 	}
2080 
2081 	request_data = ioc->diag_buffer[buffer_type];
2082 	if (!request_data) {
2083 		ioc_err(ioc, "%s: doesn't have buffer for buffer_type(0x%02x)\n",
2084 			__func__, buffer_type);
2085 		return -ENOMEM;
2086 	}
2087 
2088 	if ((ioc->diag_buffer_status[buffer_type] &
2089 	    MPT3_DIAG_BUFFER_IS_REGISTERED))
2090 		karg.application_flags |= MPT3_APP_FLAGS_BUFFER_VALID;
2091 
2092 	if (!(ioc->diag_buffer_status[buffer_type] &
2093 	     MPT3_DIAG_BUFFER_IS_RELEASED))
2094 		karg.application_flags |= MPT3_APP_FLAGS_FW_BUFFER_ACCESS;
2095 
2096 	if (!(ioc->diag_buffer_status[buffer_type] &
2097 	    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED))
2098 		karg.application_flags |= MPT3_APP_FLAGS_DYNAMIC_BUFFER_ALLOC;
2099 
2100 	if ((ioc->diag_buffer_status[buffer_type] &
2101 	    MPT3_DIAG_BUFFER_IS_APP_OWNED))
2102 		karg.application_flags |= MPT3_APP_FLAGS_APP_OWNED;
2103 
2104 	for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
2105 		karg.product_specific[i] =
2106 		    ioc->product_specific[buffer_type][i];
2107 
2108 	karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type];
2109 	karg.driver_added_buffer_size = 0;
2110 	karg.unique_id = ioc->unique_id[buffer_type];
2111 	karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type];
2112 
2113 	if (copy_to_user(arg, &karg, sizeof(struct mpt3_diag_query))) {
2114 		ioc_err(ioc, "%s: unable to write mpt3_diag_query data @ %p\n",
2115 			__func__, arg);
2116 		return -EFAULT;
2117 	}
2118 	return 0;
2119 }
2120 
2121 /**
2122  * mpt3sas_send_diag_release - Diag Release Message
2123  * @ioc: per adapter object
2124  * @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
2125  * @issue_reset: specifies whether host reset is required.
2126  *
2127  */
2128 int
mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER * ioc,u8 buffer_type,u8 * issue_reset)2129 mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
2130 	u8 *issue_reset)
2131 {
2132 	Mpi2DiagReleaseRequest_t *mpi_request;
2133 	Mpi2DiagReleaseReply_t *mpi_reply;
2134 	u16 smid;
2135 	u16 ioc_status;
2136 	u32 ioc_state;
2137 	int rc;
2138 	u8 reset_needed = 0;
2139 
2140 	dctlprintk(ioc, ioc_info(ioc, "%s\n",
2141 				 __func__));
2142 
2143 	rc = 0;
2144 	*issue_reset = 0;
2145 
2146 
2147 	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
2148 	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
2149 		if (ioc->diag_buffer_status[buffer_type] &
2150 		    MPT3_DIAG_BUFFER_IS_REGISTERED)
2151 			ioc->diag_buffer_status[buffer_type] |=
2152 			    MPT3_DIAG_BUFFER_IS_RELEASED;
2153 		dctlprintk(ioc,
2154 			   ioc_info(ioc, "%s: skipping due to FAULT state\n",
2155 				    __func__));
2156 		rc = -EAGAIN;
2157 		goto out;
2158 	}
2159 
2160 	if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
2161 		ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
2162 		rc = -EAGAIN;
2163 		goto out;
2164 	}
2165 
2166 	smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
2167 	if (!smid) {
2168 		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
2169 		rc = -EAGAIN;
2170 		goto out;
2171 	}
2172 
2173 	ioc->ctl_cmds.status = MPT3_CMD_PENDING;
2174 	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
2175 	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
2176 	memset(mpi_request, 0, ioc->request_sz);
2177 	ioc->ctl_cmds.smid = smid;
2178 
2179 	mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE;
2180 	mpi_request->BufferType = buffer_type;
2181 	mpi_request->VF_ID = 0; /* TODO */
2182 	mpi_request->VP_ID = 0;
2183 
2184 	init_completion(&ioc->ctl_cmds.done);
2185 	ioc->put_smid_default(ioc, smid);
2186 	wait_for_completion_timeout(&ioc->ctl_cmds.done,
2187 	    MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
2188 
2189 	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
2190 		mpt3sas_check_cmd_timeout(ioc,
2191 		    ioc->ctl_cmds.status, mpi_request,
2192 		    sizeof(Mpi2DiagReleaseRequest_t)/4, reset_needed);
2193 		*issue_reset = reset_needed;
2194 		rc = -EFAULT;
2195 		goto out;
2196 	}
2197 
2198 	/* process the completed Reply Message Frame */
2199 	if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
2200 		ioc_err(ioc, "%s: no reply message\n", __func__);
2201 		rc = -EFAULT;
2202 		goto out;
2203 	}
2204 
2205 	mpi_reply = ioc->ctl_cmds.reply;
2206 	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
2207 
2208 	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
2209 		ioc->diag_buffer_status[buffer_type] |=
2210 		    MPT3_DIAG_BUFFER_IS_RELEASED;
2211 		dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
2212 	} else {
2213 		ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
2214 			 __func__,
2215 			 ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
2216 		rc = -EFAULT;
2217 	}
2218 
2219  out:
2220 	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
2221 	return rc;
2222 }
2223 
2224 /**
2225  * _ctl_diag_release - request to send Diag Release Message to firmware
2226  * @ioc: ?
2227  * @arg: user space buffer containing ioctl content
2228  *
2229  * This allows ownership of the specified buffer to returned to the driver,
2230  * allowing an application to read the buffer without fear that firmware is
2231  * overwriting information in the buffer.
2232  */
2233 static long
_ctl_diag_release(struct MPT3SAS_ADAPTER * ioc,void __user * arg)2234 _ctl_diag_release(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
2235 {
2236 	struct mpt3_diag_release karg;
2237 	void *request_data;
2238 	int rc;
2239 	u8 buffer_type;
2240 	u8 issue_reset = 0;
2241 
2242 	if (copy_from_user(&karg, arg, sizeof(karg))) {
2243 		pr_err("failure at %s:%d/%s()!\n",
2244 		    __FILE__, __LINE__, __func__);
2245 		return -EFAULT;
2246 	}
2247 
2248 	dctlprintk(ioc, ioc_info(ioc, "%s\n",
2249 				 __func__));
2250 
2251 	buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id);
2252 	if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) {
2253 		ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n",
2254 		    __func__, karg.unique_id);
2255 		return -EINVAL;
2256 	}
2257 
2258 	if (!_ctl_diag_capability(ioc, buffer_type)) {
2259 		ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
2260 			__func__, buffer_type);
2261 		return -EPERM;
2262 	}
2263 
2264 	if ((ioc->diag_buffer_status[buffer_type] &
2265 	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
2266 		ioc_err(ioc, "%s: buffer_type(0x%02x) is not registered\n",
2267 			__func__, buffer_type);
2268 		return -EINVAL;
2269 	}
2270 
2271 	if (karg.unique_id != ioc->unique_id[buffer_type]) {
2272 		ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
2273 			__func__, karg.unique_id);
2274 		return -EINVAL;
2275 	}
2276 
2277 	if (ioc->diag_buffer_status[buffer_type] &
2278 	    MPT3_DIAG_BUFFER_IS_RELEASED) {
2279 		ioc_err(ioc, "%s: buffer_type(0x%02x) is already released\n",
2280 			__func__, buffer_type);
2281 		return -EINVAL;
2282 	}
2283 
2284 	request_data = ioc->diag_buffer[buffer_type];
2285 
2286 	if (!request_data) {
2287 		ioc_err(ioc, "%s: doesn't have memory allocated for buffer_type(0x%02x)\n",
2288 			__func__, buffer_type);
2289 		return -ENOMEM;
2290 	}
2291 
2292 	/* buffers were released by due to host reset */
2293 	if ((ioc->diag_buffer_status[buffer_type] &
2294 	    MPT3_DIAG_BUFFER_IS_DIAG_RESET)) {
2295 		ioc->diag_buffer_status[buffer_type] |=
2296 		    MPT3_DIAG_BUFFER_IS_RELEASED;
2297 		ioc->diag_buffer_status[buffer_type] &=
2298 		    ~MPT3_DIAG_BUFFER_IS_DIAG_RESET;
2299 		ioc_err(ioc, "%s: buffer_type(0x%02x) was released due to host reset\n",
2300 			__func__, buffer_type);
2301 		return 0;
2302 	}
2303 
2304 	rc = mpt3sas_send_diag_release(ioc, buffer_type, &issue_reset);
2305 
2306 	if (issue_reset)
2307 		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
2308 
2309 	return rc;
2310 }
2311 
2312 /**
2313  * _ctl_diag_read_buffer - request for copy of the diag buffer
2314  * @ioc: per adapter object
2315  * @arg: user space buffer containing ioctl content
2316  */
2317 static long
_ctl_diag_read_buffer(struct MPT3SAS_ADAPTER * ioc,void __user * arg)2318 _ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
2319 {
2320 	struct mpt3_diag_read_buffer karg;
2321 	struct mpt3_diag_read_buffer __user *uarg = arg;
2322 	void *request_data, *diag_data;
2323 	Mpi2DiagBufferPostRequest_t *mpi_request;
2324 	Mpi2DiagBufferPostReply_t *mpi_reply;
2325 	int rc, i;
2326 	u8 buffer_type;
2327 	unsigned long request_size, copy_size;
2328 	u16 smid;
2329 	u16 ioc_status;
2330 	u8 issue_reset = 0;
2331 
2332 	if (copy_from_user(&karg, arg, sizeof(karg))) {
2333 		pr_err("failure at %s:%d/%s()!\n",
2334 		    __FILE__, __LINE__, __func__);
2335 		return -EFAULT;
2336 	}
2337 
2338 	dctlprintk(ioc, ioc_info(ioc, "%s\n",
2339 				 __func__));
2340 
2341 	buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id);
2342 	if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) {
2343 		ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n",
2344 		    __func__, karg.unique_id);
2345 		return -EINVAL;
2346 	}
2347 
2348 	if (!_ctl_diag_capability(ioc, buffer_type)) {
2349 		ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
2350 			__func__, buffer_type);
2351 		return -EPERM;
2352 	}
2353 
2354 	if (karg.unique_id != ioc->unique_id[buffer_type]) {
2355 		ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
2356 			__func__, karg.unique_id);
2357 		return -EINVAL;
2358 	}
2359 
2360 	request_data = ioc->diag_buffer[buffer_type];
2361 	if (!request_data) {
2362 		ioc_err(ioc, "%s: doesn't have buffer for buffer_type(0x%02x)\n",
2363 			__func__, buffer_type);
2364 		return -ENOMEM;
2365 	}
2366 
2367 	request_size = ioc->diag_buffer_sz[buffer_type];
2368 
2369 	if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) {
2370 		ioc_err(ioc, "%s: either the starting_offset or bytes_to_read are not 4 byte aligned\n",
2371 			__func__);
2372 		return -EINVAL;
2373 	}
2374 
2375 	if (karg.starting_offset > request_size)
2376 		return -EINVAL;
2377 
2378 	diag_data = (void *)(request_data + karg.starting_offset);
2379 	dctlprintk(ioc,
2380 		   ioc_info(ioc, "%s: diag_buffer(%p), offset(%d), sz(%d)\n",
2381 			    __func__, diag_data, karg.starting_offset,
2382 			    karg.bytes_to_read));
2383 
2384 	/* Truncate data on requests that are too large */
2385 	if ((diag_data + karg.bytes_to_read < diag_data) ||
2386 	    (diag_data + karg.bytes_to_read > request_data + request_size))
2387 		copy_size = request_size - karg.starting_offset;
2388 	else
2389 		copy_size = karg.bytes_to_read;
2390 
2391 	if (copy_to_user((void __user *)uarg->diagnostic_data,
2392 	    diag_data, copy_size)) {
2393 		ioc_err(ioc, "%s: Unable to write mpt_diag_read_buffer_t data @ %p\n",
2394 			__func__, diag_data);
2395 		return -EFAULT;
2396 	}
2397 
2398 	if ((karg.flags & MPT3_FLAGS_REREGISTER) == 0)
2399 		return 0;
2400 
2401 	dctlprintk(ioc,
2402 		   ioc_info(ioc, "%s: Reregister buffer_type(0x%02x)\n",
2403 			    __func__, buffer_type));
2404 	if ((ioc->diag_buffer_status[buffer_type] &
2405 	    MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
2406 		dctlprintk(ioc,
2407 			   ioc_info(ioc, "%s: buffer_type(0x%02x) is still registered\n",
2408 				    __func__, buffer_type));
2409 		return 0;
2410 	}
2411 	/* Get a free request frame and save the message context.
2412 	*/
2413 
2414 	if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
2415 		ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
2416 		rc = -EAGAIN;
2417 		goto out;
2418 	}
2419 
2420 	smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
2421 	if (!smid) {
2422 		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
2423 		rc = -EAGAIN;
2424 		goto out;
2425 	}
2426 
2427 	rc = 0;
2428 	ioc->ctl_cmds.status = MPT3_CMD_PENDING;
2429 	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
2430 	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
2431 	memset(mpi_request, 0, ioc->request_sz);
2432 	ioc->ctl_cmds.smid = smid;
2433 
2434 	mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
2435 	mpi_request->BufferType = buffer_type;
2436 	mpi_request->BufferLength =
2437 	    cpu_to_le32(ioc->diag_buffer_sz[buffer_type]);
2438 	mpi_request->BufferAddress =
2439 	    cpu_to_le64(ioc->diag_buffer_dma[buffer_type]);
2440 	for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
2441 		mpi_request->ProductSpecific[i] =
2442 			cpu_to_le32(ioc->product_specific[buffer_type][i]);
2443 	mpi_request->VF_ID = 0; /* TODO */
2444 	mpi_request->VP_ID = 0;
2445 
2446 	init_completion(&ioc->ctl_cmds.done);
2447 	ioc->put_smid_default(ioc, smid);
2448 	wait_for_completion_timeout(&ioc->ctl_cmds.done,
2449 	    MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
2450 
2451 	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
2452 		mpt3sas_check_cmd_timeout(ioc,
2453 		    ioc->ctl_cmds.status, mpi_request,
2454 		    sizeof(Mpi2DiagBufferPostRequest_t)/4, issue_reset);
2455 		goto issue_host_reset;
2456 	}
2457 
2458 	/* process the completed Reply Message Frame */
2459 	if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
2460 		ioc_err(ioc, "%s: no reply message\n", __func__);
2461 		rc = -EFAULT;
2462 		goto out;
2463 	}
2464 
2465 	mpi_reply = ioc->ctl_cmds.reply;
2466 	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
2467 
2468 	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
2469 		ioc->diag_buffer_status[buffer_type] |=
2470 		    MPT3_DIAG_BUFFER_IS_REGISTERED;
2471 		ioc->diag_buffer_status[buffer_type] &=
2472 		    ~MPT3_DIAG_BUFFER_IS_RELEASED;
2473 		dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
2474 	} else {
2475 		ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
2476 			 __func__, ioc_status,
2477 			 le32_to_cpu(mpi_reply->IOCLogInfo));
2478 		rc = -EFAULT;
2479 	}
2480 
2481  issue_host_reset:
2482 	if (issue_reset)
2483 		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
2484 
2485  out:
2486 
2487 	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
2488 	return rc;
2489 }
2490 
2491 /**
2492  * _ctl_addnl_diag_query - query relevant info associated with diag buffers
2493  * @ioc: per adapter object
2494  * @arg: user space buffer containing ioctl content
2495  *
2496  * The application will send only unique_id.  Driver will
2497  * inspect unique_id first, if valid, fill the details related to cause
2498  * for diag buffer release.
2499  */
2500 static long
_ctl_addnl_diag_query(struct MPT3SAS_ADAPTER * ioc,void __user * arg)2501 _ctl_addnl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
2502 {
2503 	struct mpt3_addnl_diag_query karg;
2504 	u32 buffer_type = 0;
2505 
2506 	if (copy_from_user(&karg, arg, sizeof(karg))) {
2507 		pr_err("%s: failure at %s:%d/%s()!\n",
2508 		    ioc->name, __FILE__, __LINE__, __func__);
2509 		return -EFAULT;
2510 	}
2511 	dctlprintk(ioc, ioc_info(ioc, "%s\n",  __func__));
2512 	if (karg.unique_id == 0) {
2513 		ioc_err(ioc, "%s: unique_id is(0x%08x)\n",
2514 		    __func__, karg.unique_id);
2515 		return -EPERM;
2516 	}
2517 	buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id);
2518 	if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) {
2519 		ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n",
2520 		    __func__, karg.unique_id);
2521 		return -EPERM;
2522 	}
2523 	memset(&karg.rel_query, 0, sizeof(karg.rel_query));
2524 	if ((ioc->diag_buffer_status[buffer_type] &
2525 	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
2526 		ioc_info(ioc, "%s: buffer_type(0x%02x) is not registered\n",
2527 		    __func__, buffer_type);
2528 		goto out;
2529 	}
2530 	if ((ioc->diag_buffer_status[buffer_type] &
2531 	    MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
2532 		ioc_err(ioc, "%s: buffer_type(0x%02x) is not released\n",
2533 		    __func__, buffer_type);
2534 		return -EPERM;
2535 	}
2536 	memcpy(&karg.rel_query, &ioc->htb_rel, sizeof(karg.rel_query));
2537 out:
2538 	if (copy_to_user(arg, &karg, sizeof(struct mpt3_addnl_diag_query))) {
2539 		ioc_err(ioc, "%s: unable to write mpt3_addnl_diag_query data @ %p\n",
2540 		    __func__, arg);
2541 		return -EFAULT;
2542 	}
2543 	return 0;
2544 }
2545 
2546 #ifdef CONFIG_COMPAT
2547 /**
2548  * _ctl_compat_mpt_command - convert 32bit pointers to 64bit.
2549  * @ioc: per adapter object
2550  * @cmd: ioctl opcode
2551  * @arg: (struct mpt3_ioctl_command32)
2552  *
2553  * MPT3COMMAND32 - Handle 32bit applications running on 64bit os.
2554  */
2555 static long
_ctl_compat_mpt_command(struct MPT3SAS_ADAPTER * ioc,unsigned cmd,void __user * arg)2556 _ctl_compat_mpt_command(struct MPT3SAS_ADAPTER *ioc, unsigned cmd,
2557 	void __user *arg)
2558 {
2559 	struct mpt3_ioctl_command32 karg32;
2560 	struct mpt3_ioctl_command32 __user *uarg;
2561 	struct mpt3_ioctl_command karg;
2562 
2563 	if (_IOC_SIZE(cmd) != sizeof(struct mpt3_ioctl_command32))
2564 		return -EINVAL;
2565 
2566 	uarg = (struct mpt3_ioctl_command32 __user *) arg;
2567 
2568 	if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) {
2569 		pr_err("failure at %s:%d/%s()!\n",
2570 		    __FILE__, __LINE__, __func__);
2571 		return -EFAULT;
2572 	}
2573 
2574 	memset(&karg, 0, sizeof(struct mpt3_ioctl_command));
2575 	karg.hdr.ioc_number = karg32.hdr.ioc_number;
2576 	karg.hdr.port_number = karg32.hdr.port_number;
2577 	karg.hdr.max_data_size = karg32.hdr.max_data_size;
2578 	karg.timeout = karg32.timeout;
2579 	karg.max_reply_bytes = karg32.max_reply_bytes;
2580 	karg.data_in_size = karg32.data_in_size;
2581 	karg.data_out_size = karg32.data_out_size;
2582 	karg.max_sense_bytes = karg32.max_sense_bytes;
2583 	karg.data_sge_offset = karg32.data_sge_offset;
2584 	karg.reply_frame_buf_ptr = compat_ptr(karg32.reply_frame_buf_ptr);
2585 	karg.data_in_buf_ptr = compat_ptr(karg32.data_in_buf_ptr);
2586 	karg.data_out_buf_ptr = compat_ptr(karg32.data_out_buf_ptr);
2587 	karg.sense_data_ptr = compat_ptr(karg32.sense_data_ptr);
2588 	return _ctl_do_mpt_command(ioc, karg, &uarg->mf);
2589 }
2590 #endif
2591 
2592 /**
2593  * _ctl_ioctl_main - main ioctl entry point
2594  * @file:  (struct file)
2595  * @cmd:  ioctl opcode
2596  * @arg:  user space data buffer
2597  * @compat:  handles 32 bit applications in 64bit os
2598  * @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
2599  * MPI25_VERSION | MPI26_VERSION for mpt3ctl ioctl device.
2600  */
2601 static long
_ctl_ioctl_main(struct file * file,unsigned int cmd,void __user * arg,u8 compat,u16 mpi_version)2602 _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
2603 	u8 compat, u16 mpi_version)
2604 {
2605 	struct MPT3SAS_ADAPTER *ioc;
2606 	struct mpt3_ioctl_header ioctl_header;
2607 	enum block_state state;
2608 	long ret = -ENOIOCTLCMD;
2609 
2610 	/* get IOCTL header */
2611 	if (copy_from_user(&ioctl_header, (char __user *)arg,
2612 	    sizeof(struct mpt3_ioctl_header))) {
2613 		pr_err("failure at %s:%d/%s()!\n",
2614 		    __FILE__, __LINE__, __func__);
2615 		return -EFAULT;
2616 	}
2617 
2618 	if (_ctl_verify_adapter(ioctl_header.ioc_number,
2619 				&ioc, mpi_version) == -1 || !ioc)
2620 		return -ENODEV;
2621 
2622 	/* pci_access_mutex lock acquired by ioctl path */
2623 	mutex_lock(&ioc->pci_access_mutex);
2624 
2625 	if (ioc->shost_recovery || ioc->pci_error_recovery ||
2626 	    ioc->is_driver_loading || ioc->remove_host) {
2627 		ret = -EAGAIN;
2628 		goto out_unlock_pciaccess;
2629 	}
2630 
2631 	state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
2632 	if (state == NON_BLOCKING) {
2633 		if (!mutex_trylock(&ioc->ctl_cmds.mutex)) {
2634 			ret = -EAGAIN;
2635 			goto out_unlock_pciaccess;
2636 		}
2637 	} else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) {
2638 		ret = -ERESTARTSYS;
2639 		goto out_unlock_pciaccess;
2640 	}
2641 
2642 
2643 	switch (cmd) {
2644 	case MPT3IOCINFO:
2645 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_iocinfo))
2646 			ret = _ctl_getiocinfo(ioc, arg);
2647 		break;
2648 #ifdef CONFIG_COMPAT
2649 	case MPT3COMMAND32:
2650 #endif
2651 	case MPT3COMMAND:
2652 	{
2653 		struct mpt3_ioctl_command __user *uarg;
2654 		struct mpt3_ioctl_command karg;
2655 
2656 #ifdef CONFIG_COMPAT
2657 		if (compat) {
2658 			ret = _ctl_compat_mpt_command(ioc, cmd, arg);
2659 			break;
2660 		}
2661 #endif
2662 		if (copy_from_user(&karg, arg, sizeof(karg))) {
2663 			pr_err("failure at %s:%d/%s()!\n",
2664 			    __FILE__, __LINE__, __func__);
2665 			ret = -EFAULT;
2666 			break;
2667 		}
2668 
2669 		if (karg.hdr.ioc_number != ioctl_header.ioc_number) {
2670 			ret = -EINVAL;
2671 			break;
2672 		}
2673 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_command)) {
2674 			uarg = arg;
2675 			ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf);
2676 		}
2677 		break;
2678 	}
2679 	case MPT3EVENTQUERY:
2680 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_eventquery))
2681 			ret = _ctl_eventquery(ioc, arg);
2682 		break;
2683 	case MPT3EVENTENABLE:
2684 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_eventenable))
2685 			ret = _ctl_eventenable(ioc, arg);
2686 		break;
2687 	case MPT3EVENTREPORT:
2688 		ret = _ctl_eventreport(ioc, arg);
2689 		break;
2690 	case MPT3HARDRESET:
2691 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_diag_reset))
2692 			ret = _ctl_do_reset(ioc, arg);
2693 		break;
2694 	case MPT3BTDHMAPPING:
2695 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_btdh_mapping))
2696 			ret = _ctl_btdh_mapping(ioc, arg);
2697 		break;
2698 	case MPT3DIAGREGISTER:
2699 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_register))
2700 			ret = _ctl_diag_register(ioc, arg);
2701 		break;
2702 	case MPT3DIAGUNREGISTER:
2703 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_unregister))
2704 			ret = _ctl_diag_unregister(ioc, arg);
2705 		break;
2706 	case MPT3DIAGQUERY:
2707 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_query))
2708 			ret = _ctl_diag_query(ioc, arg);
2709 		break;
2710 	case MPT3DIAGRELEASE:
2711 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_release))
2712 			ret = _ctl_diag_release(ioc, arg);
2713 		break;
2714 	case MPT3DIAGREADBUFFER:
2715 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_read_buffer))
2716 			ret = _ctl_diag_read_buffer(ioc, arg);
2717 		break;
2718 	case MPT3ADDNLDIAGQUERY:
2719 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_addnl_diag_query))
2720 			ret = _ctl_addnl_diag_query(ioc, arg);
2721 		break;
2722 	default:
2723 		dctlprintk(ioc,
2724 			   ioc_info(ioc, "unsupported ioctl opcode(0x%08x)\n",
2725 				    cmd));
2726 		break;
2727 	}
2728 
2729 	mutex_unlock(&ioc->ctl_cmds.mutex);
2730 out_unlock_pciaccess:
2731 	mutex_unlock(&ioc->pci_access_mutex);
2732 	return ret;
2733 }
2734 
2735 /**
2736  * _ctl_ioctl - mpt3ctl main ioctl entry point (unlocked)
2737  * @file: (struct file)
2738  * @cmd: ioctl opcode
2739  * @arg: ?
2740  */
2741 static long
_ctl_ioctl(struct file * file,unsigned int cmd,unsigned long arg)2742 _ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
2743 {
2744 	long ret;
2745 
2746 	/* pass MPI25_VERSION | MPI26_VERSION value,
2747 	 * to indicate that this ioctl cmd
2748 	 * came from mpt3ctl ioctl device.
2749 	 */
2750 	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0,
2751 		MPI25_VERSION | MPI26_VERSION);
2752 	return ret;
2753 }
2754 
2755 /**
2756  * _ctl_mpt2_ioctl - mpt2ctl main ioctl entry point (unlocked)
2757  * @file: (struct file)
2758  * @cmd: ioctl opcode
2759  * @arg: ?
2760  */
2761 static long
_ctl_mpt2_ioctl(struct file * file,unsigned int cmd,unsigned long arg)2762 _ctl_mpt2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
2763 {
2764 	long ret;
2765 
2766 	/* pass MPI2_VERSION value, to indicate that this ioctl cmd
2767 	 * came from mpt2ctl ioctl device.
2768 	 */
2769 	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0, MPI2_VERSION);
2770 	return ret;
2771 }
2772 #ifdef CONFIG_COMPAT
2773 /**
2774  * _ctl_ioctl_compat - main ioctl entry point (compat)
2775  * @file: ?
2776  * @cmd: ?
2777  * @arg: ?
2778  *
2779  * This routine handles 32 bit applications in 64bit os.
2780  */
2781 static long
_ctl_ioctl_compat(struct file * file,unsigned cmd,unsigned long arg)2782 _ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
2783 {
2784 	long ret;
2785 
2786 	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1,
2787 		MPI25_VERSION | MPI26_VERSION);
2788 	return ret;
2789 }
2790 
2791 /**
2792  * _ctl_mpt2_ioctl_compat - main ioctl entry point (compat)
2793  * @file: ?
2794  * @cmd: ?
2795  * @arg: ?
2796  *
2797  * This routine handles 32 bit applications in 64bit os.
2798  */
2799 static long
_ctl_mpt2_ioctl_compat(struct file * file,unsigned cmd,unsigned long arg)2800 _ctl_mpt2_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
2801 {
2802 	long ret;
2803 
2804 	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1, MPI2_VERSION);
2805 	return ret;
2806 }
2807 #endif
2808 
2809 /* scsi host attributes */
2810 /**
2811  * version_fw_show - firmware version
2812  * @cdev: pointer to embedded class device
2813  * @attr: ?
2814  * @buf: the buffer returned
2815  *
2816  * A sysfs 'read-only' shost attribute.
2817  */
2818 static ssize_t
version_fw_show(struct device * cdev,struct device_attribute * attr,char * buf)2819 version_fw_show(struct device *cdev, struct device_attribute *attr,
2820 	char *buf)
2821 {
2822 	struct Scsi_Host *shost = class_to_shost(cdev);
2823 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2824 
2825 	return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
2826 	    (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
2827 	    (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
2828 	    (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
2829 	    ioc->facts.FWVersion.Word & 0x000000FF);
2830 }
2831 static DEVICE_ATTR_RO(version_fw);
2832 
2833 /**
2834  * version_bios_show - bios version
2835  * @cdev: pointer to embedded class device
2836  * @attr: ?
2837  * @buf: the buffer returned
2838  *
2839  * A sysfs 'read-only' shost attribute.
2840  */
2841 static ssize_t
version_bios_show(struct device * cdev,struct device_attribute * attr,char * buf)2842 version_bios_show(struct device *cdev, struct device_attribute *attr,
2843 	char *buf)
2844 {
2845 	struct Scsi_Host *shost = class_to_shost(cdev);
2846 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2847 
2848 	u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
2849 
2850 	return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
2851 	    (version & 0xFF000000) >> 24,
2852 	    (version & 0x00FF0000) >> 16,
2853 	    (version & 0x0000FF00) >> 8,
2854 	    version & 0x000000FF);
2855 }
2856 static DEVICE_ATTR_RO(version_bios);
2857 
2858 /**
2859  * version_mpi_show - MPI (message passing interface) version
2860  * @cdev: pointer to embedded class device
2861  * @attr: ?
2862  * @buf: the buffer returned
2863  *
2864  * A sysfs 'read-only' shost attribute.
2865  */
2866 static ssize_t
version_mpi_show(struct device * cdev,struct device_attribute * attr,char * buf)2867 version_mpi_show(struct device *cdev, struct device_attribute *attr,
2868 	char *buf)
2869 {
2870 	struct Scsi_Host *shost = class_to_shost(cdev);
2871 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2872 
2873 	return snprintf(buf, PAGE_SIZE, "%03x.%02x\n",
2874 	    ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8);
2875 }
2876 static DEVICE_ATTR_RO(version_mpi);
2877 
2878 /**
2879  * version_product_show - product name
2880  * @cdev: pointer to embedded class device
2881  * @attr: ?
2882  * @buf: the buffer returned
2883  *
2884  * A sysfs 'read-only' shost attribute.
2885  */
2886 static ssize_t
version_product_show(struct device * cdev,struct device_attribute * attr,char * buf)2887 version_product_show(struct device *cdev, struct device_attribute *attr,
2888 	char *buf)
2889 {
2890 	struct Scsi_Host *shost = class_to_shost(cdev);
2891 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2892 
2893 	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName);
2894 }
2895 static DEVICE_ATTR_RO(version_product);
2896 
2897 /**
2898  * version_nvdata_persistent_show - ndvata persistent version
2899  * @cdev: pointer to embedded class device
2900  * @attr: ?
2901  * @buf: the buffer returned
2902  *
2903  * A sysfs 'read-only' shost attribute.
2904  */
2905 static ssize_t
version_nvdata_persistent_show(struct device * cdev,struct device_attribute * attr,char * buf)2906 version_nvdata_persistent_show(struct device *cdev,
2907 	struct device_attribute *attr, char *buf)
2908 {
2909 	struct Scsi_Host *shost = class_to_shost(cdev);
2910 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2911 
2912 	return snprintf(buf, PAGE_SIZE, "%08xh\n",
2913 	    le32_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word));
2914 }
2915 static DEVICE_ATTR_RO(version_nvdata_persistent);
2916 
2917 /**
2918  * version_nvdata_default_show - nvdata default version
2919  * @cdev: pointer to embedded class device
2920  * @attr: ?
2921  * @buf: the buffer returned
2922  *
2923  * A sysfs 'read-only' shost attribute.
2924  */
2925 static ssize_t
version_nvdata_default_show(struct device * cdev,struct device_attribute * attr,char * buf)2926 version_nvdata_default_show(struct device *cdev, struct device_attribute
2927 	*attr, char *buf)
2928 {
2929 	struct Scsi_Host *shost = class_to_shost(cdev);
2930 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2931 
2932 	return snprintf(buf, PAGE_SIZE, "%08xh\n",
2933 	    le32_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word));
2934 }
2935 static DEVICE_ATTR_RO(version_nvdata_default);
2936 
2937 /**
2938  * board_name_show - board name
2939  * @cdev: pointer to embedded class device
2940  * @attr: ?
2941  * @buf: the buffer returned
2942  *
2943  * A sysfs 'read-only' shost attribute.
2944  */
2945 static ssize_t
board_name_show(struct device * cdev,struct device_attribute * attr,char * buf)2946 board_name_show(struct device *cdev, struct device_attribute *attr,
2947 	char *buf)
2948 {
2949 	struct Scsi_Host *shost = class_to_shost(cdev);
2950 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2951 
2952 	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName);
2953 }
2954 static DEVICE_ATTR_RO(board_name);
2955 
2956 /**
2957  * board_assembly_show - board assembly name
2958  * @cdev: pointer to embedded class device
2959  * @attr: ?
2960  * @buf: the buffer returned
2961  *
2962  * A sysfs 'read-only' shost attribute.
2963  */
2964 static ssize_t
board_assembly_show(struct device * cdev,struct device_attribute * attr,char * buf)2965 board_assembly_show(struct device *cdev, struct device_attribute *attr,
2966 	char *buf)
2967 {
2968 	struct Scsi_Host *shost = class_to_shost(cdev);
2969 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2970 
2971 	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly);
2972 }
2973 static DEVICE_ATTR_RO(board_assembly);
2974 
2975 /**
2976  * board_tracer_show - board tracer number
2977  * @cdev: pointer to embedded class device
2978  * @attr: ?
2979  * @buf: the buffer returned
2980  *
2981  * A sysfs 'read-only' shost attribute.
2982  */
2983 static ssize_t
board_tracer_show(struct device * cdev,struct device_attribute * attr,char * buf)2984 board_tracer_show(struct device *cdev, struct device_attribute *attr,
2985 	char *buf)
2986 {
2987 	struct Scsi_Host *shost = class_to_shost(cdev);
2988 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2989 
2990 	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber);
2991 }
2992 static DEVICE_ATTR_RO(board_tracer);
2993 
2994 /**
2995  * io_delay_show - io missing delay
2996  * @cdev: pointer to embedded class device
2997  * @attr: ?
2998  * @buf: the buffer returned
2999  *
3000  * This is for firmware implemention for deboucing device
3001  * removal events.
3002  *
3003  * A sysfs 'read-only' shost attribute.
3004  */
3005 static ssize_t
io_delay_show(struct device * cdev,struct device_attribute * attr,char * buf)3006 io_delay_show(struct device *cdev, struct device_attribute *attr,
3007 	char *buf)
3008 {
3009 	struct Scsi_Host *shost = class_to_shost(cdev);
3010 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3011 
3012 	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
3013 }
3014 static DEVICE_ATTR_RO(io_delay);
3015 
3016 /**
3017  * device_delay_show - device missing delay
3018  * @cdev: pointer to embedded class device
3019  * @attr: ?
3020  * @buf: the buffer returned
3021  *
3022  * This is for firmware implemention for deboucing device
3023  * removal events.
3024  *
3025  * A sysfs 'read-only' shost attribute.
3026  */
3027 static ssize_t
device_delay_show(struct device * cdev,struct device_attribute * attr,char * buf)3028 device_delay_show(struct device *cdev, struct device_attribute *attr,
3029 	char *buf)
3030 {
3031 	struct Scsi_Host *shost = class_to_shost(cdev);
3032 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3033 
3034 	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
3035 }
3036 static DEVICE_ATTR_RO(device_delay);
3037 
3038 /**
3039  * fw_queue_depth_show - global credits
3040  * @cdev: pointer to embedded class device
3041  * @attr: ?
3042  * @buf: the buffer returned
3043  *
3044  * This is firmware queue depth limit
3045  *
3046  * A sysfs 'read-only' shost attribute.
3047  */
3048 static ssize_t
fw_queue_depth_show(struct device * cdev,struct device_attribute * attr,char * buf)3049 fw_queue_depth_show(struct device *cdev, struct device_attribute *attr,
3050 	char *buf)
3051 {
3052 	struct Scsi_Host *shost = class_to_shost(cdev);
3053 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3054 
3055 	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit);
3056 }
3057 static DEVICE_ATTR_RO(fw_queue_depth);
3058 
3059 /**
3060  * host_sas_address_show - sas address
3061  * @cdev: pointer to embedded class device
3062  * @attr: ?
3063  * @buf: the buffer returned
3064  *
3065  * This is the controller sas address
3066  *
3067  * A sysfs 'read-only' shost attribute.
3068  */
3069 static ssize_t
host_sas_address_show(struct device * cdev,struct device_attribute * attr,char * buf)3070 host_sas_address_show(struct device *cdev, struct device_attribute *attr,
3071 	char *buf)
3072 
3073 {
3074 	struct Scsi_Host *shost = class_to_shost(cdev);
3075 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3076 
3077 	return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
3078 	    (unsigned long long)ioc->sas_hba.sas_address);
3079 }
3080 static DEVICE_ATTR_RO(host_sas_address);
3081 
3082 /**
3083  * logging_level_show - logging level
3084  * @cdev: pointer to embedded class device
3085  * @attr: ?
3086  * @buf: the buffer returned
3087  *
3088  * A sysfs 'read/write' shost attribute.
3089  */
3090 static ssize_t
logging_level_show(struct device * cdev,struct device_attribute * attr,char * buf)3091 logging_level_show(struct device *cdev, struct device_attribute *attr,
3092 	char *buf)
3093 {
3094 	struct Scsi_Host *shost = class_to_shost(cdev);
3095 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3096 
3097 	return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level);
3098 }
3099 static ssize_t
logging_level_store(struct device * cdev,struct device_attribute * attr,const char * buf,size_t count)3100 logging_level_store(struct device *cdev, struct device_attribute *attr,
3101 	const char *buf, size_t count)
3102 {
3103 	struct Scsi_Host *shost = class_to_shost(cdev);
3104 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3105 	int val = 0;
3106 
3107 	if (sscanf(buf, "%x", &val) != 1)
3108 		return -EINVAL;
3109 
3110 	ioc->logging_level = val;
3111 	ioc_info(ioc, "logging_level=%08xh\n",
3112 		 ioc->logging_level);
3113 	return strlen(buf);
3114 }
3115 static DEVICE_ATTR_RW(logging_level);
3116 
3117 /**
3118  * fwfault_debug_show - show/store fwfault_debug
3119  * @cdev: pointer to embedded class device
3120  * @attr: ?
3121  * @buf: the buffer returned
3122  *
3123  * mpt3sas_fwfault_debug is command line option
3124  * A sysfs 'read/write' shost attribute.
3125  */
3126 static ssize_t
fwfault_debug_show(struct device * cdev,struct device_attribute * attr,char * buf)3127 fwfault_debug_show(struct device *cdev, struct device_attribute *attr,
3128 	char *buf)
3129 {
3130 	struct Scsi_Host *shost = class_to_shost(cdev);
3131 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3132 
3133 	return snprintf(buf, PAGE_SIZE, "%d\n", ioc->fwfault_debug);
3134 }
3135 static ssize_t
fwfault_debug_store(struct device * cdev,struct device_attribute * attr,const char * buf,size_t count)3136 fwfault_debug_store(struct device *cdev, struct device_attribute *attr,
3137 	const char *buf, size_t count)
3138 {
3139 	struct Scsi_Host *shost = class_to_shost(cdev);
3140 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3141 	int val = 0;
3142 
3143 	if (sscanf(buf, "%d", &val) != 1)
3144 		return -EINVAL;
3145 
3146 	ioc->fwfault_debug = val;
3147 	ioc_info(ioc, "fwfault_debug=%d\n",
3148 		 ioc->fwfault_debug);
3149 	return strlen(buf);
3150 }
3151 static DEVICE_ATTR_RW(fwfault_debug);
3152 
3153 /**
3154  * ioc_reset_count_show - ioc reset count
3155  * @cdev: pointer to embedded class device
3156  * @attr: ?
3157  * @buf: the buffer returned
3158  *
3159  * This is firmware queue depth limit
3160  *
3161  * A sysfs 'read-only' shost attribute.
3162  */
3163 static ssize_t
ioc_reset_count_show(struct device * cdev,struct device_attribute * attr,char * buf)3164 ioc_reset_count_show(struct device *cdev, struct device_attribute *attr,
3165 	char *buf)
3166 {
3167 	struct Scsi_Host *shost = class_to_shost(cdev);
3168 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3169 
3170 	return snprintf(buf, PAGE_SIZE, "%d\n", ioc->ioc_reset_count);
3171 }
3172 static DEVICE_ATTR_RO(ioc_reset_count);
3173 
3174 /**
3175  * reply_queue_count_show - number of reply queues
3176  * @cdev: pointer to embedded class device
3177  * @attr: ?
3178  * @buf: the buffer returned
3179  *
3180  * This is number of reply queues
3181  *
3182  * A sysfs 'read-only' shost attribute.
3183  */
3184 static ssize_t
reply_queue_count_show(struct device * cdev,struct device_attribute * attr,char * buf)3185 reply_queue_count_show(struct device *cdev,
3186 	struct device_attribute *attr, char *buf)
3187 {
3188 	u8 reply_queue_count;
3189 	struct Scsi_Host *shost = class_to_shost(cdev);
3190 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3191 
3192 	if ((ioc->facts.IOCCapabilities &
3193 	    MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable)
3194 		reply_queue_count = ioc->reply_queue_count;
3195 	else
3196 		reply_queue_count = 1;
3197 
3198 	return snprintf(buf, PAGE_SIZE, "%d\n", reply_queue_count);
3199 }
3200 static DEVICE_ATTR_RO(reply_queue_count);
3201 
3202 /**
3203  * BRM_status_show - Backup Rail Monitor Status
3204  * @cdev: pointer to embedded class device
3205  * @attr: ?
3206  * @buf: the buffer returned
3207  *
3208  * This is number of reply queues
3209  *
3210  * A sysfs 'read-only' shost attribute.
3211  */
3212 static ssize_t
BRM_status_show(struct device * cdev,struct device_attribute * attr,char * buf)3213 BRM_status_show(struct device *cdev, struct device_attribute *attr,
3214 	char *buf)
3215 {
3216 	struct Scsi_Host *shost = class_to_shost(cdev);
3217 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3218 	Mpi2IOUnitPage3_t io_unit_pg3;
3219 	Mpi2ConfigReply_t mpi_reply;
3220 	u16 backup_rail_monitor_status = 0;
3221 	u16 ioc_status;
3222 	int sz;
3223 	ssize_t rc = 0;
3224 
3225 	if (!ioc->is_warpdrive) {
3226 		ioc_err(ioc, "%s: BRM attribute is only for warpdrive\n",
3227 			__func__);
3228 		return 0;
3229 	}
3230 	/* pci_access_mutex lock acquired by sysfs show path */
3231 	mutex_lock(&ioc->pci_access_mutex);
3232 	if (ioc->pci_error_recovery || ioc->remove_host)
3233 		goto out;
3234 
3235 	sz = sizeof(io_unit_pg3);
3236 	memset(&io_unit_pg3, 0, sz);
3237 
3238 	if (mpt3sas_config_get_iounit_pg3(ioc, &mpi_reply, &io_unit_pg3, sz) !=
3239 	    0) {
3240 		ioc_err(ioc, "%s: failed reading iounit_pg3\n",
3241 			__func__);
3242 		rc = -EINVAL;
3243 		goto out;
3244 	}
3245 
3246 	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
3247 	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
3248 		ioc_err(ioc, "%s: iounit_pg3 failed with ioc_status(0x%04x)\n",
3249 			__func__, ioc_status);
3250 		rc = -EINVAL;
3251 		goto out;
3252 	}
3253 
3254 	if (io_unit_pg3.GPIOCount < 25) {
3255 		ioc_err(ioc, "%s: iounit_pg3.GPIOCount less than 25 entries, detected (%d) entries\n",
3256 			__func__, io_unit_pg3.GPIOCount);
3257 		rc = -EINVAL;
3258 		goto out;
3259 	}
3260 
3261 	/* BRM status is in bit zero of GPIOVal[24] */
3262 	backup_rail_monitor_status = le16_to_cpu(io_unit_pg3.GPIOVal[24]);
3263 	rc = snprintf(buf, PAGE_SIZE, "%d\n", (backup_rail_monitor_status & 1));
3264 
3265  out:
3266 	mutex_unlock(&ioc->pci_access_mutex);
3267 	return rc;
3268 }
3269 static DEVICE_ATTR_RO(BRM_status);
3270 
3271 struct DIAG_BUFFER_START {
3272 	__le32	Size;
3273 	__le32	DiagVersion;
3274 	u8	BufferType;
3275 	u8	Reserved[3];
3276 	__le32	Reserved1;
3277 	__le32	Reserved2;
3278 	__le32	Reserved3;
3279 };
3280 
3281 /**
3282  * host_trace_buffer_size_show - host buffer size (trace only)
3283  * @cdev: pointer to embedded class device
3284  * @attr: ?
3285  * @buf: the buffer returned
3286  *
3287  * A sysfs 'read-only' shost attribute.
3288  */
3289 static ssize_t
host_trace_buffer_size_show(struct device * cdev,struct device_attribute * attr,char * buf)3290 host_trace_buffer_size_show(struct device *cdev,
3291 	struct device_attribute *attr, char *buf)
3292 {
3293 	struct Scsi_Host *shost = class_to_shost(cdev);
3294 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3295 	u32 size = 0;
3296 	struct DIAG_BUFFER_START *request_data;
3297 
3298 	if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
3299 		ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
3300 			__func__);
3301 		return 0;
3302 	}
3303 
3304 	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3305 	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
3306 		ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
3307 			__func__);
3308 		return 0;
3309 	}
3310 
3311 	request_data = (struct DIAG_BUFFER_START *)
3312 	    ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE];
3313 	if ((le32_to_cpu(request_data->DiagVersion) == 0x00000000 ||
3314 	    le32_to_cpu(request_data->DiagVersion) == 0x01000000 ||
3315 	    le32_to_cpu(request_data->DiagVersion) == 0x01010000) &&
3316 	    le32_to_cpu(request_data->Reserved3) == 0x4742444c)
3317 		size = le32_to_cpu(request_data->Size);
3318 
3319 	ioc->ring_buffer_sz = size;
3320 	return snprintf(buf, PAGE_SIZE, "%d\n", size);
3321 }
3322 static DEVICE_ATTR_RO(host_trace_buffer_size);
3323 
3324 /**
3325  * host_trace_buffer_show - firmware ring buffer (trace only)
3326  * @cdev: pointer to embedded class device
3327  * @attr: ?
3328  * @buf: the buffer returned
3329  *
3330  * A sysfs 'read/write' shost attribute.
3331  *
3332  * You will only be able to read 4k bytes of ring buffer at a time.
3333  * In order to read beyond 4k bytes, you will have to write out the
3334  * offset to the same attribute, it will move the pointer.
3335  */
3336 static ssize_t
host_trace_buffer_show(struct device * cdev,struct device_attribute * attr,char * buf)3337 host_trace_buffer_show(struct device *cdev, struct device_attribute *attr,
3338 	char *buf)
3339 {
3340 	struct Scsi_Host *shost = class_to_shost(cdev);
3341 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3342 	void *request_data;
3343 	u32 size;
3344 
3345 	if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
3346 		ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
3347 			__func__);
3348 		return 0;
3349 	}
3350 
3351 	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3352 	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
3353 		ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
3354 			__func__);
3355 		return 0;
3356 	}
3357 
3358 	if (ioc->ring_buffer_offset > ioc->ring_buffer_sz)
3359 		return 0;
3360 
3361 	size = ioc->ring_buffer_sz - ioc->ring_buffer_offset;
3362 	size = (size >= PAGE_SIZE) ? (PAGE_SIZE - 1) : size;
3363 	request_data = ioc->diag_buffer[0] + ioc->ring_buffer_offset;
3364 	memcpy(buf, request_data, size);
3365 	return size;
3366 }
3367 
3368 static ssize_t
host_trace_buffer_store(struct device * cdev,struct device_attribute * attr,const char * buf,size_t count)3369 host_trace_buffer_store(struct device *cdev, struct device_attribute *attr,
3370 	const char *buf, size_t count)
3371 {
3372 	struct Scsi_Host *shost = class_to_shost(cdev);
3373 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3374 	int val = 0;
3375 
3376 	if (sscanf(buf, "%d", &val) != 1)
3377 		return -EINVAL;
3378 
3379 	ioc->ring_buffer_offset = val;
3380 	return strlen(buf);
3381 }
3382 static DEVICE_ATTR_RW(host_trace_buffer);
3383 
3384 
3385 /*****************************************/
3386 
3387 /**
3388  * host_trace_buffer_enable_show - firmware ring buffer (trace only)
3389  * @cdev: pointer to embedded class device
3390  * @attr: ?
3391  * @buf: the buffer returned
3392  *
3393  * A sysfs 'read/write' shost attribute.
3394  *
3395  * This is a mechnism to post/release host_trace_buffers
3396  */
3397 static ssize_t
host_trace_buffer_enable_show(struct device * cdev,struct device_attribute * attr,char * buf)3398 host_trace_buffer_enable_show(struct device *cdev,
3399 	struct device_attribute *attr, char *buf)
3400 {
3401 	struct Scsi_Host *shost = class_to_shost(cdev);
3402 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3403 
3404 	if ((!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) ||
3405 	   ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3406 	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0))
3407 		return snprintf(buf, PAGE_SIZE, "off\n");
3408 	else if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3409 	    MPT3_DIAG_BUFFER_IS_RELEASED))
3410 		return snprintf(buf, PAGE_SIZE, "release\n");
3411 	else
3412 		return snprintf(buf, PAGE_SIZE, "post\n");
3413 }
3414 
3415 static ssize_t
host_trace_buffer_enable_store(struct device * cdev,struct device_attribute * attr,const char * buf,size_t count)3416 host_trace_buffer_enable_store(struct device *cdev,
3417 	struct device_attribute *attr, const char *buf, size_t count)
3418 {
3419 	struct Scsi_Host *shost = class_to_shost(cdev);
3420 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3421 	char str[10] = "";
3422 	struct mpt3_diag_register diag_register;
3423 	u8 issue_reset = 0;
3424 
3425 	/* don't allow post/release occurr while recovery is active */
3426 	if (ioc->shost_recovery || ioc->remove_host ||
3427 	    ioc->pci_error_recovery || ioc->is_driver_loading)
3428 		return -EBUSY;
3429 
3430 	if (sscanf(buf, "%9s", str) != 1)
3431 		return -EINVAL;
3432 
3433 	if (!strcmp(str, "post")) {
3434 		/* exit out if host buffers are already posted */
3435 		if ((ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) &&
3436 		    (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3437 		    MPT3_DIAG_BUFFER_IS_REGISTERED) &&
3438 		    ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3439 		    MPT3_DIAG_BUFFER_IS_RELEASED) == 0))
3440 			goto out;
3441 		memset(&diag_register, 0, sizeof(struct mpt3_diag_register));
3442 		ioc_info(ioc, "posting host trace buffers\n");
3443 		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
3444 
3445 		if (ioc->manu_pg11.HostTraceBufferMaxSizeKB != 0 &&
3446 		    ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE] != 0) {
3447 			/* post the same buffer allocated previously */
3448 			diag_register.requested_buffer_size =
3449 			    ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE];
3450 		} else {
3451 			/*
3452 			 * Free the diag buffer memory which was previously
3453 			 * allocated by an application.
3454 			 */
3455 			if ((ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE] != 0)
3456 			    &&
3457 			    (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3458 			    MPT3_DIAG_BUFFER_IS_APP_OWNED)) {
3459 				dma_free_coherent(&ioc->pdev->dev,
3460 						  ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE],
3461 						  ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE],
3462 						  ioc->diag_buffer_dma[MPI2_DIAG_BUF_TYPE_TRACE]);
3463 				ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE] =
3464 				    NULL;
3465 			}
3466 
3467 			diag_register.requested_buffer_size = (1024 * 1024);
3468 		}
3469 
3470 		diag_register.unique_id =
3471 		    (ioc->hba_mpi_version_belonged == MPI2_VERSION) ?
3472 		    (MPT2DIAGBUFFUNIQUEID):(MPT3DIAGBUFFUNIQUEID);
3473 		ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] = 0;
3474 		_ctl_diag_register_2(ioc,  &diag_register);
3475 		if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3476 		    MPT3_DIAG_BUFFER_IS_REGISTERED) {
3477 			ioc_info(ioc,
3478 			    "Trace buffer %d KB allocated through sysfs\n",
3479 			    diag_register.requested_buffer_size>>10);
3480 			if (ioc->hba_mpi_version_belonged != MPI2_VERSION)
3481 				ioc->diag_buffer_status[
3482 				    MPI2_DIAG_BUF_TYPE_TRACE] |=
3483 				    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
3484 		}
3485 	} else if (!strcmp(str, "release")) {
3486 		/* exit out if host buffers are already released */
3487 		if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE])
3488 			goto out;
3489 		if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3490 		    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0)
3491 			goto out;
3492 		if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3493 		    MPT3_DIAG_BUFFER_IS_RELEASED))
3494 			goto out;
3495 		ioc_info(ioc, "releasing host trace buffer\n");
3496 		ioc->htb_rel.buffer_rel_condition = MPT3_DIAG_BUFFER_REL_SYSFS;
3497 		mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE,
3498 		    &issue_reset);
3499 	}
3500 
3501  out:
3502 	return strlen(buf);
3503 }
3504 static DEVICE_ATTR_RW(host_trace_buffer_enable);
3505 
3506 /*********** diagnostic trigger suppport *********************************/
3507 
3508 /**
3509  * diag_trigger_master_show - show the diag_trigger_master attribute
3510  * @cdev: pointer to embedded class device
3511  * @attr: ?
3512  * @buf: the buffer returned
3513  *
3514  * A sysfs 'read/write' shost attribute.
3515  */
3516 static ssize_t
diag_trigger_master_show(struct device * cdev,struct device_attribute * attr,char * buf)3517 diag_trigger_master_show(struct device *cdev,
3518 	struct device_attribute *attr, char *buf)
3519 
3520 {
3521 	struct Scsi_Host *shost = class_to_shost(cdev);
3522 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3523 	unsigned long flags;
3524 	ssize_t rc;
3525 
3526 	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3527 	rc = sizeof(struct SL_WH_MASTER_TRIGGER_T);
3528 	memcpy(buf, &ioc->diag_trigger_master, rc);
3529 	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3530 	return rc;
3531 }
3532 
3533 /**
3534  * diag_trigger_master_store - store the diag_trigger_master attribute
3535  * @cdev: pointer to embedded class device
3536  * @attr: ?
3537  * @buf: the buffer returned
3538  * @count: ?
3539  *
3540  * A sysfs 'read/write' shost attribute.
3541  */
3542 static ssize_t
diag_trigger_master_store(struct device * cdev,struct device_attribute * attr,const char * buf,size_t count)3543 diag_trigger_master_store(struct device *cdev,
3544 	struct device_attribute *attr, const char *buf, size_t count)
3545 
3546 {
3547 	struct Scsi_Host *shost = class_to_shost(cdev);
3548 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3549 	struct SL_WH_MASTER_TRIGGER_T *master_tg;
3550 	unsigned long flags;
3551 	ssize_t rc;
3552 	bool set = 1;
3553 
3554 	rc = min(sizeof(struct SL_WH_MASTER_TRIGGER_T), count);
3555 
3556 	if (ioc->supports_trigger_pages) {
3557 		master_tg = kzalloc(sizeof(struct SL_WH_MASTER_TRIGGER_T),
3558 		    GFP_KERNEL);
3559 		if (!master_tg)
3560 			return -ENOMEM;
3561 
3562 		memcpy(master_tg, buf, rc);
3563 		if (!master_tg->MasterData)
3564 			set = 0;
3565 		if (mpt3sas_config_update_driver_trigger_pg1(ioc, master_tg,
3566 		    set)) {
3567 			kfree(master_tg);
3568 			return -EFAULT;
3569 		}
3570 		kfree(master_tg);
3571 	}
3572 
3573 	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3574 	memset(&ioc->diag_trigger_master, 0,
3575 	    sizeof(struct SL_WH_MASTER_TRIGGER_T));
3576 	memcpy(&ioc->diag_trigger_master, buf, rc);
3577 	ioc->diag_trigger_master.MasterData |=
3578 	    (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
3579 	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3580 	return rc;
3581 }
3582 static DEVICE_ATTR_RW(diag_trigger_master);
3583 
3584 
3585 /**
3586  * diag_trigger_event_show - show the diag_trigger_event attribute
3587  * @cdev: pointer to embedded class device
3588  * @attr: ?
3589  * @buf: the buffer returned
3590  *
3591  * A sysfs 'read/write' shost attribute.
3592  */
3593 static ssize_t
diag_trigger_event_show(struct device * cdev,struct device_attribute * attr,char * buf)3594 diag_trigger_event_show(struct device *cdev,
3595 	struct device_attribute *attr, char *buf)
3596 {
3597 	struct Scsi_Host *shost = class_to_shost(cdev);
3598 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3599 	unsigned long flags;
3600 	ssize_t rc;
3601 
3602 	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3603 	rc = sizeof(struct SL_WH_EVENT_TRIGGERS_T);
3604 	memcpy(buf, &ioc->diag_trigger_event, rc);
3605 	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3606 	return rc;
3607 }
3608 
3609 /**
3610  * diag_trigger_event_store - store the diag_trigger_event attribute
3611  * @cdev: pointer to embedded class device
3612  * @attr: ?
3613  * @buf: the buffer returned
3614  * @count: ?
3615  *
3616  * A sysfs 'read/write' shost attribute.
3617  */
3618 static ssize_t
diag_trigger_event_store(struct device * cdev,struct device_attribute * attr,const char * buf,size_t count)3619 diag_trigger_event_store(struct device *cdev,
3620 	struct device_attribute *attr, const char *buf, size_t count)
3621 
3622 {
3623 	struct Scsi_Host *shost = class_to_shost(cdev);
3624 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3625 	struct SL_WH_EVENT_TRIGGERS_T *event_tg;
3626 	unsigned long flags;
3627 	ssize_t sz;
3628 	bool set = 1;
3629 
3630 	sz = min(sizeof(struct SL_WH_EVENT_TRIGGERS_T), count);
3631 	if (ioc->supports_trigger_pages) {
3632 		event_tg = kzalloc(sizeof(struct SL_WH_EVENT_TRIGGERS_T),
3633 		    GFP_KERNEL);
3634 		if (!event_tg)
3635 			return -ENOMEM;
3636 
3637 		memcpy(event_tg, buf, sz);
3638 		if (!event_tg->ValidEntries)
3639 			set = 0;
3640 		if (mpt3sas_config_update_driver_trigger_pg2(ioc, event_tg,
3641 		    set)) {
3642 			kfree(event_tg);
3643 			return -EFAULT;
3644 		}
3645 		kfree(event_tg);
3646 	}
3647 
3648 	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3649 
3650 	memset(&ioc->diag_trigger_event, 0,
3651 	    sizeof(struct SL_WH_EVENT_TRIGGERS_T));
3652 	memcpy(&ioc->diag_trigger_event, buf, sz);
3653 	if (ioc->diag_trigger_event.ValidEntries > NUM_VALID_ENTRIES)
3654 		ioc->diag_trigger_event.ValidEntries = NUM_VALID_ENTRIES;
3655 	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3656 	return sz;
3657 }
3658 static DEVICE_ATTR_RW(diag_trigger_event);
3659 
3660 
3661 /**
3662  * diag_trigger_scsi_show - show the diag_trigger_scsi attribute
3663  * @cdev: pointer to embedded class device
3664  * @attr: ?
3665  * @buf: the buffer returned
3666  *
3667  * A sysfs 'read/write' shost attribute.
3668  */
3669 static ssize_t
diag_trigger_scsi_show(struct device * cdev,struct device_attribute * attr,char * buf)3670 diag_trigger_scsi_show(struct device *cdev,
3671 	struct device_attribute *attr, char *buf)
3672 {
3673 	struct Scsi_Host *shost = class_to_shost(cdev);
3674 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3675 	unsigned long flags;
3676 	ssize_t rc;
3677 
3678 	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3679 	rc = sizeof(struct SL_WH_SCSI_TRIGGERS_T);
3680 	memcpy(buf, &ioc->diag_trigger_scsi, rc);
3681 	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3682 	return rc;
3683 }
3684 
3685 /**
3686  * diag_trigger_scsi_store - store the diag_trigger_scsi attribute
3687  * @cdev: pointer to embedded class device
3688  * @attr: ?
3689  * @buf: the buffer returned
3690  * @count: ?
3691  *
3692  * A sysfs 'read/write' shost attribute.
3693  */
3694 static ssize_t
diag_trigger_scsi_store(struct device * cdev,struct device_attribute * attr,const char * buf,size_t count)3695 diag_trigger_scsi_store(struct device *cdev,
3696 	struct device_attribute *attr, const char *buf, size_t count)
3697 {
3698 	struct Scsi_Host *shost = class_to_shost(cdev);
3699 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3700 	struct SL_WH_SCSI_TRIGGERS_T *scsi_tg;
3701 	unsigned long flags;
3702 	ssize_t sz;
3703 	bool set = 1;
3704 
3705 	sz = min(sizeof(struct SL_WH_SCSI_TRIGGERS_T), count);
3706 	if (ioc->supports_trigger_pages) {
3707 		scsi_tg = kzalloc(sizeof(struct SL_WH_SCSI_TRIGGERS_T),
3708 		    GFP_KERNEL);
3709 		if (!scsi_tg)
3710 			return -ENOMEM;
3711 
3712 		memcpy(scsi_tg, buf, sz);
3713 		if (!scsi_tg->ValidEntries)
3714 			set = 0;
3715 		if (mpt3sas_config_update_driver_trigger_pg3(ioc, scsi_tg,
3716 		    set)) {
3717 			kfree(scsi_tg);
3718 			return -EFAULT;
3719 		}
3720 		kfree(scsi_tg);
3721 	}
3722 
3723 	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3724 
3725 	memset(&ioc->diag_trigger_scsi, 0, sizeof(ioc->diag_trigger_scsi));
3726 	memcpy(&ioc->diag_trigger_scsi, buf, sz);
3727 	if (ioc->diag_trigger_scsi.ValidEntries > NUM_VALID_ENTRIES)
3728 		ioc->diag_trigger_scsi.ValidEntries = NUM_VALID_ENTRIES;
3729 	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3730 	return sz;
3731 }
3732 static DEVICE_ATTR_RW(diag_trigger_scsi);
3733 
3734 
3735 /**
3736  * diag_trigger_mpi_show - show the diag_trigger_mpi attribute
3737  * @cdev: pointer to embedded class device
3738  * @attr: ?
3739  * @buf: the buffer returned
3740  *
3741  * A sysfs 'read/write' shost attribute.
3742  */
3743 static ssize_t
diag_trigger_mpi_show(struct device * cdev,struct device_attribute * attr,char * buf)3744 diag_trigger_mpi_show(struct device *cdev,
3745 	struct device_attribute *attr, char *buf)
3746 {
3747 	struct Scsi_Host *shost = class_to_shost(cdev);
3748 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3749 	unsigned long flags;
3750 	ssize_t rc;
3751 
3752 	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3753 	rc = sizeof(struct SL_WH_MPI_TRIGGERS_T);
3754 	memcpy(buf, &ioc->diag_trigger_mpi, rc);
3755 	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3756 	return rc;
3757 }
3758 
3759 /**
3760  * diag_trigger_mpi_store - store the diag_trigger_mpi attribute
3761  * @cdev: pointer to embedded class device
3762  * @attr: ?
3763  * @buf: the buffer returned
3764  * @count: ?
3765  *
3766  * A sysfs 'read/write' shost attribute.
3767  */
3768 static ssize_t
diag_trigger_mpi_store(struct device * cdev,struct device_attribute * attr,const char * buf,size_t count)3769 diag_trigger_mpi_store(struct device *cdev,
3770 	struct device_attribute *attr, const char *buf, size_t count)
3771 {
3772 	struct Scsi_Host *shost = class_to_shost(cdev);
3773 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3774 	struct SL_WH_MPI_TRIGGERS_T *mpi_tg;
3775 	unsigned long flags;
3776 	ssize_t sz;
3777 	bool set = 1;
3778 
3779 	sz = min(sizeof(struct SL_WH_MPI_TRIGGERS_T), count);
3780 	if (ioc->supports_trigger_pages) {
3781 		mpi_tg = kzalloc(sizeof(struct SL_WH_MPI_TRIGGERS_T),
3782 		    GFP_KERNEL);
3783 		if (!mpi_tg)
3784 			return -ENOMEM;
3785 
3786 		memcpy(mpi_tg, buf, sz);
3787 		if (!mpi_tg->ValidEntries)
3788 			set = 0;
3789 		if (mpt3sas_config_update_driver_trigger_pg4(ioc, mpi_tg,
3790 		    set)) {
3791 			kfree(mpi_tg);
3792 			return -EFAULT;
3793 		}
3794 		kfree(mpi_tg);
3795 	}
3796 
3797 	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3798 	memset(&ioc->diag_trigger_mpi, 0,
3799 	    sizeof(ioc->diag_trigger_mpi));
3800 	memcpy(&ioc->diag_trigger_mpi, buf, sz);
3801 	if (ioc->diag_trigger_mpi.ValidEntries > NUM_VALID_ENTRIES)
3802 		ioc->diag_trigger_mpi.ValidEntries = NUM_VALID_ENTRIES;
3803 	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3804 	return sz;
3805 }
3806 
3807 static DEVICE_ATTR_RW(diag_trigger_mpi);
3808 
3809 /*********** diagnostic trigger suppport *** END ****************************/
3810 
3811 /*****************************************/
3812 
3813 /**
3814  * drv_support_bitmap_show - driver supported feature bitmap
3815  * @cdev: pointer to embedded class device
3816  * @attr: unused
3817  * @buf: the buffer returned
3818  *
3819  * A sysfs 'read-only' shost attribute.
3820  */
3821 static ssize_t
drv_support_bitmap_show(struct device * cdev,struct device_attribute * attr,char * buf)3822 drv_support_bitmap_show(struct device *cdev,
3823 	struct device_attribute *attr, char *buf)
3824 {
3825 	struct Scsi_Host *shost = class_to_shost(cdev);
3826 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3827 
3828 	return snprintf(buf, PAGE_SIZE, "0x%08x\n", ioc->drv_support_bitmap);
3829 }
3830 static DEVICE_ATTR_RO(drv_support_bitmap);
3831 
3832 /**
3833  * enable_sdev_max_qd_show - display whether sdev max qd is enabled/disabled
3834  * @cdev: pointer to embedded class device
3835  * @attr: unused
3836  * @buf: the buffer returned
3837  *
3838  * A sysfs read/write shost attribute. This attribute is used to set the
3839  * targets queue depth to HBA IO queue depth if this attribute is enabled.
3840  */
3841 static ssize_t
enable_sdev_max_qd_show(struct device * cdev,struct device_attribute * attr,char * buf)3842 enable_sdev_max_qd_show(struct device *cdev,
3843 	struct device_attribute *attr, char *buf)
3844 {
3845 	struct Scsi_Host *shost = class_to_shost(cdev);
3846 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3847 
3848 	return snprintf(buf, PAGE_SIZE, "%d\n", ioc->enable_sdev_max_qd);
3849 }
3850 
3851 /**
3852  * enable_sdev_max_qd_store - Enable/disable sdev max qd
3853  * @cdev: pointer to embedded class device
3854  * @attr: unused
3855  * @buf: the buffer returned
3856  * @count: unused
3857  *
3858  * A sysfs read/write shost attribute. This attribute is used to set the
3859  * targets queue depth to HBA IO queue depth if this attribute is enabled.
3860  * If this attribute is disabled then targets will have corresponding default
3861  * queue depth.
3862  */
3863 static ssize_t
enable_sdev_max_qd_store(struct device * cdev,struct device_attribute * attr,const char * buf,size_t count)3864 enable_sdev_max_qd_store(struct device *cdev,
3865 	struct device_attribute *attr, const char *buf, size_t count)
3866 {
3867 	struct Scsi_Host *shost = class_to_shost(cdev);
3868 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3869 	struct MPT3SAS_DEVICE *sas_device_priv_data;
3870 	struct MPT3SAS_TARGET *sas_target_priv_data;
3871 	int val = 0;
3872 	struct scsi_device *sdev;
3873 	struct _raid_device *raid_device;
3874 	int qdepth;
3875 
3876 	if (kstrtoint(buf, 0, &val) != 0)
3877 		return -EINVAL;
3878 
3879 	switch (val) {
3880 	case 0:
3881 		ioc->enable_sdev_max_qd = 0;
3882 		shost_for_each_device(sdev, ioc->shost) {
3883 			sas_device_priv_data = sdev->hostdata;
3884 			if (!sas_device_priv_data)
3885 				continue;
3886 			sas_target_priv_data = sas_device_priv_data->sas_target;
3887 			if (!sas_target_priv_data)
3888 				continue;
3889 
3890 			if (sas_target_priv_data->flags &
3891 			    MPT_TARGET_FLAGS_VOLUME) {
3892 				raid_device =
3893 				    mpt3sas_raid_device_find_by_handle(ioc,
3894 				    sas_target_priv_data->handle);
3895 
3896 				switch (raid_device->volume_type) {
3897 				case MPI2_RAID_VOL_TYPE_RAID0:
3898 					if (raid_device->device_info &
3899 					    MPI2_SAS_DEVICE_INFO_SSP_TARGET)
3900 						qdepth =
3901 						    MPT3SAS_SAS_QUEUE_DEPTH;
3902 					else
3903 						qdepth =
3904 						    MPT3SAS_SATA_QUEUE_DEPTH;
3905 					break;
3906 				case MPI2_RAID_VOL_TYPE_RAID1E:
3907 				case MPI2_RAID_VOL_TYPE_RAID1:
3908 				case MPI2_RAID_VOL_TYPE_RAID10:
3909 				case MPI2_RAID_VOL_TYPE_UNKNOWN:
3910 				default:
3911 					qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
3912 				}
3913 			} else if (sas_target_priv_data->flags &
3914 			    MPT_TARGET_FLAGS_PCIE_DEVICE)
3915 				qdepth = ioc->max_nvme_qd;
3916 			else
3917 				qdepth = (sas_target_priv_data->sas_dev->port_type > 1) ?
3918 				    ioc->max_wideport_qd : ioc->max_narrowport_qd;
3919 
3920 			mpt3sas_scsih_change_queue_depth(sdev, qdepth);
3921 		}
3922 		break;
3923 	case 1:
3924 		ioc->enable_sdev_max_qd = 1;
3925 		shost_for_each_device(sdev, ioc->shost)
3926 			mpt3sas_scsih_change_queue_depth(sdev,
3927 			    shost->can_queue);
3928 		break;
3929 	default:
3930 		return -EINVAL;
3931 	}
3932 
3933 	return strlen(buf);
3934 }
3935 static DEVICE_ATTR_RW(enable_sdev_max_qd);
3936 
3937 static struct attribute *mpt3sas_host_attrs[] = {
3938 	&dev_attr_version_fw.attr,
3939 	&dev_attr_version_bios.attr,
3940 	&dev_attr_version_mpi.attr,
3941 	&dev_attr_version_product.attr,
3942 	&dev_attr_version_nvdata_persistent.attr,
3943 	&dev_attr_version_nvdata_default.attr,
3944 	&dev_attr_board_name.attr,
3945 	&dev_attr_board_assembly.attr,
3946 	&dev_attr_board_tracer.attr,
3947 	&dev_attr_io_delay.attr,
3948 	&dev_attr_device_delay.attr,
3949 	&dev_attr_logging_level.attr,
3950 	&dev_attr_fwfault_debug.attr,
3951 	&dev_attr_fw_queue_depth.attr,
3952 	&dev_attr_host_sas_address.attr,
3953 	&dev_attr_ioc_reset_count.attr,
3954 	&dev_attr_host_trace_buffer_size.attr,
3955 	&dev_attr_host_trace_buffer.attr,
3956 	&dev_attr_host_trace_buffer_enable.attr,
3957 	&dev_attr_reply_queue_count.attr,
3958 	&dev_attr_diag_trigger_master.attr,
3959 	&dev_attr_diag_trigger_event.attr,
3960 	&dev_attr_diag_trigger_scsi.attr,
3961 	&dev_attr_diag_trigger_mpi.attr,
3962 	&dev_attr_drv_support_bitmap.attr,
3963 	&dev_attr_BRM_status.attr,
3964 	&dev_attr_enable_sdev_max_qd.attr,
3965 	NULL,
3966 };
3967 
3968 static const struct attribute_group mpt3sas_host_attr_group = {
3969 	.attrs = mpt3sas_host_attrs
3970 };
3971 
3972 const struct attribute_group *mpt3sas_host_groups[] = {
3973 	&mpt3sas_host_attr_group,
3974 	NULL
3975 };
3976 
3977 /* device attributes */
3978 
3979 /**
3980  * sas_address_show - sas address
3981  * @dev: pointer to embedded class device
3982  * @attr: ?
3983  * @buf: the buffer returned
3984  *
3985  * This is the sas address for the target
3986  *
3987  * A sysfs 'read-only' shost attribute.
3988  */
3989 static ssize_t
sas_address_show(struct device * dev,struct device_attribute * attr,char * buf)3990 sas_address_show(struct device *dev, struct device_attribute *attr,
3991 	char *buf)
3992 {
3993 	struct scsi_device *sdev = to_scsi_device(dev);
3994 	struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
3995 
3996 	return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
3997 	    (unsigned long long)sas_device_priv_data->sas_target->sas_address);
3998 }
3999 static DEVICE_ATTR_RO(sas_address);
4000 
4001 /**
4002  * sas_device_handle_show - device handle
4003  * @dev: pointer to embedded class device
4004  * @attr: ?
4005  * @buf: the buffer returned
4006  *
4007  * This is the firmware assigned device handle
4008  *
4009  * A sysfs 'read-only' shost attribute.
4010  */
4011 static ssize_t
sas_device_handle_show(struct device * dev,struct device_attribute * attr,char * buf)4012 sas_device_handle_show(struct device *dev, struct device_attribute *attr,
4013 	char *buf)
4014 {
4015 	struct scsi_device *sdev = to_scsi_device(dev);
4016 	struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
4017 
4018 	return snprintf(buf, PAGE_SIZE, "0x%04x\n",
4019 	    sas_device_priv_data->sas_target->handle);
4020 }
4021 static DEVICE_ATTR_RO(sas_device_handle);
4022 
4023 /**
4024  * sas_ncq_prio_supported_show - Indicate if device supports NCQ priority
4025  * @dev: pointer to embedded device
4026  * @attr: sas_ncq_prio_supported attribute descriptor
4027  * @buf: the buffer returned
4028  *
4029  * A sysfs 'read-only' sdev attribute, only works with SATA
4030  */
4031 static ssize_t
sas_ncq_prio_supported_show(struct device * dev,struct device_attribute * attr,char * buf)4032 sas_ncq_prio_supported_show(struct device *dev,
4033 			    struct device_attribute *attr, char *buf)
4034 {
4035 	struct scsi_device *sdev = to_scsi_device(dev);
4036 
4037 	return sysfs_emit(buf, "%d\n", scsih_ncq_prio_supp(sdev));
4038 }
4039 static DEVICE_ATTR_RO(sas_ncq_prio_supported);
4040 
4041 /**
4042  * sas_ncq_prio_enable_show - send prioritized io commands to device
4043  * @dev: pointer to embedded device
4044  * @attr: ?
4045  * @buf: the buffer returned
4046  *
4047  * A sysfs 'read/write' sdev attribute, only works with SATA
4048  */
4049 static ssize_t
sas_ncq_prio_enable_show(struct device * dev,struct device_attribute * attr,char * buf)4050 sas_ncq_prio_enable_show(struct device *dev,
4051 				 struct device_attribute *attr, char *buf)
4052 {
4053 	struct scsi_device *sdev = to_scsi_device(dev);
4054 	struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
4055 
4056 	return snprintf(buf, PAGE_SIZE, "%d\n",
4057 			sas_device_priv_data->ncq_prio_enable);
4058 }
4059 
4060 static ssize_t
sas_ncq_prio_enable_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)4061 sas_ncq_prio_enable_store(struct device *dev,
4062 				  struct device_attribute *attr,
4063 				  const char *buf, size_t count)
4064 {
4065 	struct scsi_device *sdev = to_scsi_device(dev);
4066 	struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
4067 	bool ncq_prio_enable = 0;
4068 
4069 	if (kstrtobool(buf, &ncq_prio_enable))
4070 		return -EINVAL;
4071 
4072 	if (!scsih_ncq_prio_supp(sdev))
4073 		return -EINVAL;
4074 
4075 	sas_device_priv_data->ncq_prio_enable = ncq_prio_enable;
4076 	return strlen(buf);
4077 }
4078 static DEVICE_ATTR_RW(sas_ncq_prio_enable);
4079 
4080 static struct attribute *mpt3sas_dev_attrs[] = {
4081 	&dev_attr_sas_address.attr,
4082 	&dev_attr_sas_device_handle.attr,
4083 	&dev_attr_sas_ncq_prio_supported.attr,
4084 	&dev_attr_sas_ncq_prio_enable.attr,
4085 	NULL,
4086 };
4087 
4088 static const struct attribute_group mpt3sas_dev_attr_group = {
4089 	.attrs = mpt3sas_dev_attrs
4090 };
4091 
4092 const struct attribute_group *mpt3sas_dev_groups[] = {
4093 	&mpt3sas_dev_attr_group,
4094 	NULL
4095 };
4096 
4097 /* file operations table for mpt3ctl device */
4098 static const struct file_operations ctl_fops = {
4099 	.owner = THIS_MODULE,
4100 	.unlocked_ioctl = _ctl_ioctl,
4101 	.poll = _ctl_poll,
4102 	.fasync = _ctl_fasync,
4103 #ifdef CONFIG_COMPAT
4104 	.compat_ioctl = _ctl_ioctl_compat,
4105 #endif
4106 };
4107 
4108 /* file operations table for mpt2ctl device */
4109 static const struct file_operations ctl_gen2_fops = {
4110 	.owner = THIS_MODULE,
4111 	.unlocked_ioctl = _ctl_mpt2_ioctl,
4112 	.poll = _ctl_poll,
4113 	.fasync = _ctl_fasync,
4114 #ifdef CONFIG_COMPAT
4115 	.compat_ioctl = _ctl_mpt2_ioctl_compat,
4116 #endif
4117 };
4118 
4119 static struct miscdevice ctl_dev = {
4120 	.minor  = MPT3SAS_MINOR,
4121 	.name   = MPT3SAS_DEV_NAME,
4122 	.fops   = &ctl_fops,
4123 };
4124 
4125 static struct miscdevice gen2_ctl_dev = {
4126 	.minor  = MPT2SAS_MINOR,
4127 	.name   = MPT2SAS_DEV_NAME,
4128 	.fops   = &ctl_gen2_fops,
4129 };
4130 
4131 /**
4132  * mpt3sas_ctl_init - main entry point for ctl.
4133  * @hbas_to_enumerate: ?
4134  */
4135 void
mpt3sas_ctl_init(ushort hbas_to_enumerate)4136 mpt3sas_ctl_init(ushort hbas_to_enumerate)
4137 {
4138 	async_queue = NULL;
4139 
4140 	/* Don't register mpt3ctl ioctl device if
4141 	 * hbas_to_enumarate is one.
4142 	 */
4143 	if (hbas_to_enumerate != 1)
4144 		if (misc_register(&ctl_dev) < 0)
4145 			pr_err("%s can't register misc device [minor=%d]\n",
4146 			    MPT3SAS_DRIVER_NAME, MPT3SAS_MINOR);
4147 
4148 	/* Don't register mpt3ctl ioctl device if
4149 	 * hbas_to_enumarate is two.
4150 	 */
4151 	if (hbas_to_enumerate != 2)
4152 		if (misc_register(&gen2_ctl_dev) < 0)
4153 			pr_err("%s can't register misc device [minor=%d]\n",
4154 			    MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
4155 
4156 	init_waitqueue_head(&ctl_poll_wait);
4157 }
4158 
4159 /**
4160  * mpt3sas_ctl_exit - exit point for ctl
4161  * @hbas_to_enumerate: ?
4162  */
4163 void
mpt3sas_ctl_exit(ushort hbas_to_enumerate)4164 mpt3sas_ctl_exit(ushort hbas_to_enumerate)
4165 {
4166 	struct MPT3SAS_ADAPTER *ioc;
4167 	int i;
4168 
4169 	list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
4170 
4171 		/* free memory associated to diag buffers */
4172 		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
4173 			if (!ioc->diag_buffer[i])
4174 				continue;
4175 			dma_free_coherent(&ioc->pdev->dev,
4176 					  ioc->diag_buffer_sz[i],
4177 					  ioc->diag_buffer[i],
4178 					  ioc->diag_buffer_dma[i]);
4179 			ioc->diag_buffer[i] = NULL;
4180 			ioc->diag_buffer_status[i] = 0;
4181 		}
4182 
4183 		kfree(ioc->event_log);
4184 	}
4185 	if (hbas_to_enumerate != 1)
4186 		misc_deregister(&ctl_dev);
4187 	if (hbas_to_enumerate != 2)
4188 		misc_deregister(&gen2_ctl_dev);
4189 }
4190