| /linux-6.1.9/drivers/iio/light/ |
| D | isl29125.c | 53 u8 conf1; member
97 data->conf1 | isl29125_regs[si].mode); in isl29125_read_data()
121 i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, data->conf1); in isl29125_read_data()
145 if (data->conf1 & ISL29125_MODE_RANGE) in isl29125_read_raw()
165 data->conf1 |= ISL29125_MODE_RANGE; in isl29125_write_raw()
167 data->conf1 &= ~ISL29125_MODE_RANGE; in isl29125_write_raw()
171 data->conf1); in isl29125_write_raw()
224 data->conf1 |= ISL29125_MODE_RGB; in isl29125_buffer_postenable()
226 data->conf1); in isl29125_buffer_postenable()
233 data->conf1 &= ~ISL29125_MODE_MASK; in isl29125_buffer_predisable()
[all …]
|
| /linux-6.1.9/drivers/gpu/drm/bridge/synopsys/ |
| D | dw-hdmi-i2s-audio.c | 44 u8 conf1 = 0; in dw_hdmi_i2s_hw_params() local
75 conf1 = HDMI_AUD_CONF1_WIDTH_16; in dw_hdmi_i2s_hw_params()
79 conf1 = HDMI_AUD_CONF1_WIDTH_24; in dw_hdmi_i2s_hw_params()
85 conf1 |= HDMI_AUD_CONF1_MODE_I2S; in dw_hdmi_i2s_hw_params()
88 conf1 |= HDMI_AUD_CONF1_MODE_RIGHT_J; in dw_hdmi_i2s_hw_params()
91 conf1 |= HDMI_AUD_CONF1_MODE_LEFT_J; in dw_hdmi_i2s_hw_params()
94 conf1 |= HDMI_AUD_CONF1_MODE_BURST_1; in dw_hdmi_i2s_hw_params()
97 conf1 |= HDMI_AUD_CONF1_MODE_BURST_2; in dw_hdmi_i2s_hw_params()
111 hdmi_write(audio, conf1, HDMI_AUD_CONF1); in dw_hdmi_i2s_hw_params()
|
| D | dw-hdmi-ahb-audio.c | 79 u8 conf1; member
406 u8 threshold, conf0, conf1, ca; in dw_hdmi_prepare() local
434 conf1 = default_hdmi_channel_config[runtime->channels - 2].conf1; in dw_hdmi_prepare()
439 writeb_relaxed(conf1, dw->data.base + HDMI_AHB_DMA_CONF1); in dw_hdmi_prepare()
|
| D | dw-hdmi-gp-audio.c | 38 u8 conf1; member
|
| /linux-6.1.9/drivers/hwmon/ |
| D | adm1031.c | 77 u8 conf1; member
166 data->conf1 = adm1031_read_value(client, ADM1031_REG_CONF1); in adm1031_update_device()
256 (*(data)->chan_select_table)[FAN_CHAN_FROM_REG((data)->conf1)][idx % 2]
344 old_fan_mode = data->conf1; in fan_auto_channel_store()
348 ret = get_fan_auto_nearest(data, nr, val, data->conf1); in fan_auto_channel_store()
354 data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1); in fan_auto_channel_store()
355 if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) ^ in fan_auto_channel_store()
357 if (data->conf1 & ADM1031_CONF1_AUTO_MODE) { in fan_auto_channel_store()
375 data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1); in fan_auto_channel_store()
376 adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1); in fan_auto_channel_store()
[all …]
|
| D | emc2103.c | 126 u8 conf1; in read_fan_config_from_i2c() local
128 if (read_u8_from_i2c(client, REG_FAN_CONF1, &conf1) < 0) in read_fan_config_from_i2c()
131 data->fan_multiplier = 1 << ((conf1 & 0x60) >> 5); in read_fan_config_from_i2c()
132 data->fan_rpm_control = (conf1 & 0x80) != 0; in read_fan_config_from_i2c()
|
| /linux-6.1.9/drivers/atm/ |
| D | lanai.c | 285 u32 conf1, conf2; /* CONFIG[12] registers */ member
494 reg_write(lanai, lanai->conf1, Config1_Reg); in conf1_write()
506 if (unlikely((lanai->conf1 & CONFIG1_POWERDOWN) != 0)) in conf2_write_if_powerup()
872 #define set_config1(x) do { lanai->conf1 = x; conf1_write(lanai); \ in eeprom_read()
874 #define clock_h() set_config1(lanai->conf1 | CONFIG1_PROMCLK) in eeprom_read()
875 #define clock_l() set_config1(lanai->conf1 &~ CONFIG1_PROMCLK) in eeprom_read()
876 #define data_h() set_config1(lanai->conf1 | CONFIG1_PROMDATA) in eeprom_read()
877 #define data_l() set_config1(lanai->conf1 &~ CONFIG1_PROMDATA) in eeprom_read()
890 tmp = (lanai->conf1 & ~CONFIG1_PROMDATA) | in eeprom_read()
892 if (lanai->conf1 != tmp) { in eeprom_read()
[all …]
|
| /linux-6.1.9/arch/x86/events/amd/ |
| D | iommu.c | 29 #define GET_DEVID_MASK(x) ((x)->conf1 & 0xFFFFULL)
30 #define GET_DOMID_MASK(x) (((x)->conf1 >> 16) & 0xFFFFULL)
31 #define GET_PASID_MASK(x) (((x)->conf1 >> 32) & 0xFFFFFULL)
227 hwc->conf1 = event->attr.config1; in perf_iommu_event_init()
|
| /linux-6.1.9/drivers/gpu/drm/mcde/ |
| D | mcde_display.c | 345 u32 conf1; in mcde_configure_overlay() local
355 conf1 = MCDE_OVL0CONF; in mcde_configure_overlay()
363 conf1 = MCDE_OVL1CONF; in mcde_configure_overlay()
371 conf1 = MCDE_OVL2CONF; in mcde_configure_overlay()
379 conf1 = MCDE_OVL3CONF; in mcde_configure_overlay()
387 conf1 = MCDE_OVL4CONF; in mcde_configure_overlay()
395 conf1 = MCDE_OVL5CONF; in mcde_configure_overlay()
408 writel(val, mcde->regs + conf1); in mcde_configure_overlay()
|
| /linux-6.1.9/drivers/media/rc/ |
| D | ene_ir.c | 575 u8 conf1 = ene_read_reg(dev, ENE_CIRCFG); in ene_tx_enable() local
578 dev->saved_conf1 = conf1; in ene_tx_enable()
592 conf1 &= ~ENE_CIRCFG_RX_EN; in ene_tx_enable()
595 conf1 |= ENE_CIRCFG_TX_EN | ENE_CIRCFG_TX_IRQ; in ene_tx_enable()
596 ene_write_reg(dev, ENE_CIRCFG, conf1); in ene_tx_enable()
|
| /linux-6.1.9/arch/arm/boot/dts/ |
| D | gemini-nas4220b.dts | 113 conf1 {
|
| D | gemini-sq201.dts | 188 conf1 {
|
| D | gemini-sl93512r.dts | 192 conf1 {
|
| D | gemini-dlink-dns-313.dts | 231 conf1 {
|
| D | gemini-dlink-dir-685.dts | 416 conf1 {
|
| /linux-6.1.9/Documentation/x86/x86_64/ |
| D | boot-options.rst | 211 pci=conf1
212 Use conf1 access.
|
| /linux-6.1.9/drivers/pci/ |
| D | quirks.c | 1707 u32 conf1, conf5, class; in quirk_jmicron_ata() local
1714 pci_read_config_dword(pdev, 0x40, &conf1); in quirk_jmicron_ata()
1717 conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */ in quirk_jmicron_ata()
1725 conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ in quirk_jmicron_ata()
1738 conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ in quirk_jmicron_ata()
1743 conf1 |= 0x00C00000; /* Set 22, 23 */ in quirk_jmicron_ata()
1747 pci_write_config_dword(pdev, 0x40, conf1); in quirk_jmicron_ata()
|
| /linux-6.1.9/include/linux/ |
| D | perf_event.h | 193 u64 conf1; member
|
| /linux-6.1.9/Documentation/admin-guide/ |
| D | kernel-parameters.txt | 4142 conf1 [X86] Force use of PCI Configuration Access
|