1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * Copyright (C) 2010,2011 Google, Inc. 4 * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved. 5 * 6 * Author: 7 * Colin Cross <ccross@google.com> 8 * Erik Gilling <konkers@google.com> 9 * Doug Anderson <dianders@chromium.org> 10 * Stephen Warren <swarren@nvidia.com> 11 * 12 * Portions based on mach-omap2's debug-macro.S 13 * Copyright (C) 1994-1999 Russell King 14 */ 15 16#include <linux/serial_reg.h> 17 18#define UART_SHIFT 2 19 20/* Physical addresses */ 21#define TEGRA_CLK_RESET_BASE 0x60006000 22#define TEGRA_APB_MISC_BASE 0x70000000 23#define TEGRA_UARTA_BASE 0x70006000 24#define TEGRA_UARTB_BASE 0x70006040 25#define TEGRA_UARTC_BASE 0x70006200 26#define TEGRA_UARTD_BASE 0x70006300 27#define TEGRA_UARTE_BASE 0x70006400 28#define TEGRA_PMC_BASE 0x7000e400 29 30#define TEGRA_CLK_RST_DEVICES_L (TEGRA_CLK_RESET_BASE + 0x04) 31#define TEGRA_CLK_RST_DEVICES_H (TEGRA_CLK_RESET_BASE + 0x08) 32#define TEGRA_CLK_RST_DEVICES_U (TEGRA_CLK_RESET_BASE + 0x0c) 33#define TEGRA_CLK_OUT_ENB_L (TEGRA_CLK_RESET_BASE + 0x10) 34#define TEGRA_CLK_OUT_ENB_H (TEGRA_CLK_RESET_BASE + 0x14) 35#define TEGRA_CLK_OUT_ENB_U (TEGRA_CLK_RESET_BASE + 0x18) 36#define TEGRA_PMC_SCRATCH20 (TEGRA_PMC_BASE + 0xa0) 37#define TEGRA_APB_MISC_GP_HIDREV (TEGRA_APB_MISC_BASE + 0x804) 38 39/* 40 * Must be section-aligned since a section mapping is used early on. 41 * Must not overlap with regions in mach-tegra/io.c:tegra_io_desc[]. 42 */ 43#define UART_VIRTUAL_BASE 0xfe800000 44 45#define checkuart(rp, rv, lhu, bit, uart) \ 46 /* Load address of CLK_RST register */ \ 47 ldr rp, =TEGRA_CLK_RST_DEVICES_##lhu ; \ 48 /* Load value from CLK_RST register */ \ 49 ldr rp, [rp, #0] ; \ 50 /* Test UART's reset bit */ \ 51 tst rp, #(1 << bit) ; \ 52 /* If set, can't use UART; jump to save no UART */ \ 53 bne 90f ; \ 54 /* Load address of CLK_OUT_ENB register */ \ 55 ldr rp, =TEGRA_CLK_OUT_ENB_##lhu ; \ 56 /* Load value from CLK_OUT_ENB register */ \ 57 ldr rp, [rp, #0] ; \ 58 /* Test UART's clock enable bit */ \ 59 tst rp, #(1 << bit) ; \ 60 /* If clear, can't use UART; jump to save no UART */ \ 61 beq 90f ; \ 62 /* Passed all tests, load address of UART registers */ \ 63 ldr rp, =TEGRA_UART##uart##_BASE ; \ 64 /* Jump to save UART address */ \ 65 b 91f 66 67 .macro addruart, rp, rv, tmp 68 adr \rp, 99f @ actual addr of 99f 69 ldr \rv, [\rp] @ linked addr is stored there 70 sub \rv, \rv, \rp @ offset between the two 71 ldr \rp, [\rp, #4] @ linked tegra_uart_config 72 sub \tmp, \rp, \rv @ actual tegra_uart_config 73 ldr \rp, [\tmp] @ Load tegra_uart_config 74 cmp \rp, #1 @ needs initialization? 75 bne 100f @ no; go load the addresses 76 mov \rv, #0 @ yes; record init is done 77 str \rv, [\tmp] 78 79#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA 80 /* Check ODMDATA */ 8110: ldr \rp, =TEGRA_PMC_SCRATCH20 82 ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20 83 lsr \rv, \rp, #18 @ 19:18 are console type 84 and \rv, \rv, #3 85 cmp \rv, #2 @ 2 and 3 mean DCC, UART 86 beq 11f @ some boards swap the meaning 87 cmp \rv, #3 @ so accept either 88 bne 90f 8911: lsr \rv, \rp, #15 @ 17:15 are UART ID 90 and \rv, #7 91 cmp \rv, #0 @ UART 0? 92 beq 20f 93 cmp \rv, #1 @ UART 1? 94 beq 21f 95 cmp \rv, #2 @ UART 2? 96 beq 22f 97 cmp \rv, #3 @ UART 3? 98 beq 23f 99 cmp \rv, #4 @ UART 4? 100 beq 24f 101 b 90f @ invalid 102#endif 103 104#if defined(CONFIG_TEGRA_DEBUG_UARTA) || \ 105 defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) 106 /* Check UART A validity */ 10720: checkuart(\rp, \rv, L, 6, A) 108#endif 109 110#if defined(CONFIG_TEGRA_DEBUG_UARTB) || \ 111 defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) 112 /* Check UART B validity */ 11321: checkuart(\rp, \rv, L, 7, B) 114#endif 115 116#if defined(CONFIG_TEGRA_DEBUG_UARTC) || \ 117 defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) 118 /* Check UART C validity */ 11922: checkuart(\rp, \rv, H, 23, C) 120#endif 121 122#if defined(CONFIG_TEGRA_DEBUG_UARTD) || \ 123 defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) 124 /* Check UART D validity */ 12523: checkuart(\rp, \rv, U, 1, D) 126#endif 127 128#if defined(CONFIG_TEGRA_DEBUG_UARTE) || \ 129 defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) 130 /* Check UART E validity */ 13124: 132 checkuart(\rp, \rv, U, 2, E) 133#endif 134 135 /* No valid UART found */ 13690: mov \rp, #0 137 /* fall through */ 138 139 /* Record whichever UART we chose */ 14091: str \rp, [\tmp, #4] @ Store in tegra_uart_phys 141 cmp \rp, #0 @ Valid UART address? 142 bne 92f @ Yes, go process it 143 str \rp, [\tmp, #8] @ Store 0 in tegra_uart_virt 144 b 100f @ Done 14592: and \rv, \rp, #0xffffff @ offset within 1MB section 146 add \rv, \rv, #UART_VIRTUAL_BASE 147 str \rv, [\tmp, #8] @ Store in tegra_uart_virt 148 b 100f 149 150 .align 15199: .word . 152#if defined(ZIMAGE) 153 .word . + 4 154/* 155 * Storage for the state maintained by the macro. 156 * 157 * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c. 158 * That's because this header is included from multiple files, and we only 159 * want a single copy of the data. In particular, the UART probing code above 160 * assumes it's running using physical addresses. This is true when this file 161 * is included from head.o, but not when included from debug.o. So we need 162 * to share the probe results between the two copies, rather than having 163 * to re-run the probing again later. 164 * 165 * In the decompressor, we put the storage right here, since common.c 166 * isn't included in the decompressor build. This storage data gets put in 167 * .text even though it's really data, since .data is discarded from the 168 * decompressor. Luckily, .text is writeable in the decompressor, unless 169 * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug. 170 */ 171 /* Debug UART initialization required */ 172 .word 1 173 /* Debug UART physical address */ 174 .word 0 175 /* Debug UART virtual address */ 176 .word 0 177#else 178 .word tegra_uart_config 179#endif 180 .ltorg 181 182 /* Load previously selected UART address */ 183100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys 184 ldr \rv, [\tmp, #8] @ Load tegra_uart_virt 185 .endm 186 187/* 188 * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra 189 * check to make sure that the UART address is actually valid. 190 */ 191 192 .macro senduart, rd, rx 193 cmp \rx, #0 194 strbne \rd, [\rx, #UART_TX << UART_SHIFT] 1951001: 196 .endm 197 198 .macro busyuart, rd, rx 199 cmp \rx, #0 200 beq 1002f 2011001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] 202 and \rd, \rd, #UART_LSR_THRE 203 teq \rd, #UART_LSR_THRE 204 bne 1001b 2051002: 206 .endm 207 208 .macro waituartcts, rd, rx 209 cmp \rx, #0 210 beq 1002f 2111001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] 212 tst \rd, #UART_MSR_CTS 213 beq 1001b 2141002: 215 .endm 216 217 .macro waituarttxrdy,rd,rx 218 .endm 219