1 // SPDX-License-Identifier: GPL-2.0
2 /* Realtek SMI subdriver for the Realtek RTL8366RB ethernet switch
3 *
4 * This is a sparsely documented chip, the only viable documentation seems
5 * to be a patched up code drop from the vendor that appear in various
6 * GPL source trees.
7 *
8 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
9 * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
10 * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
11 * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
12 * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
13 */
14
15 #include <linux/bitops.h>
16 #include <linux/etherdevice.h>
17 #include <linux/if_bridge.h>
18 #include <linux/interrupt.h>
19 #include <linux/irqdomain.h>
20 #include <linux/irqchip/chained_irq.h>
21 #include <linux/of_irq.h>
22 #include <linux/regmap.h>
23
24 #include "realtek.h"
25
26 #define RTL8366RB_PORT_NUM_CPU 5
27 #define RTL8366RB_NUM_PORTS 6
28 #define RTL8366RB_PHY_NO_MAX 4
29 #define RTL8366RB_PHY_ADDR_MAX 31
30
31 /* Switch Global Configuration register */
32 #define RTL8366RB_SGCR 0x0000
33 #define RTL8366RB_SGCR_EN_BC_STORM_CTRL BIT(0)
34 #define RTL8366RB_SGCR_MAX_LENGTH(a) ((a) << 4)
35 #define RTL8366RB_SGCR_MAX_LENGTH_MASK RTL8366RB_SGCR_MAX_LENGTH(0x3)
36 #define RTL8366RB_SGCR_MAX_LENGTH_1522 RTL8366RB_SGCR_MAX_LENGTH(0x0)
37 #define RTL8366RB_SGCR_MAX_LENGTH_1536 RTL8366RB_SGCR_MAX_LENGTH(0x1)
38 #define RTL8366RB_SGCR_MAX_LENGTH_1552 RTL8366RB_SGCR_MAX_LENGTH(0x2)
39 #define RTL8366RB_SGCR_MAX_LENGTH_16000 RTL8366RB_SGCR_MAX_LENGTH(0x3)
40 #define RTL8366RB_SGCR_EN_VLAN BIT(13)
41 #define RTL8366RB_SGCR_EN_VLAN_4KTB BIT(14)
42
43 /* Port Enable Control register */
44 #define RTL8366RB_PECR 0x0001
45
46 /* Switch per-port learning disablement register */
47 #define RTL8366RB_PORT_LEARNDIS_CTRL 0x0002
48
49 /* Security control, actually aging register */
50 #define RTL8366RB_SECURITY_CTRL 0x0003
51
52 #define RTL8366RB_SSCR2 0x0004
53 #define RTL8366RB_SSCR2_DROP_UNKNOWN_DA BIT(0)
54
55 /* Port Mode Control registers */
56 #define RTL8366RB_PMC0 0x0005
57 #define RTL8366RB_PMC0_SPI BIT(0)
58 #define RTL8366RB_PMC0_EN_AUTOLOAD BIT(1)
59 #define RTL8366RB_PMC0_PROBE BIT(2)
60 #define RTL8366RB_PMC0_DIS_BISR BIT(3)
61 #define RTL8366RB_PMC0_ADCTEST BIT(4)
62 #define RTL8366RB_PMC0_SRAM_DIAG BIT(5)
63 #define RTL8366RB_PMC0_EN_SCAN BIT(6)
64 #define RTL8366RB_PMC0_P4_IOMODE_SHIFT 7
65 #define RTL8366RB_PMC0_P4_IOMODE_MASK GENMASK(9, 7)
66 #define RTL8366RB_PMC0_P5_IOMODE_SHIFT 10
67 #define RTL8366RB_PMC0_P5_IOMODE_MASK GENMASK(12, 10)
68 #define RTL8366RB_PMC0_SDSMODE_SHIFT 13
69 #define RTL8366RB_PMC0_SDSMODE_MASK GENMASK(15, 13)
70 #define RTL8366RB_PMC1 0x0006
71
72 /* Port Mirror Control Register */
73 #define RTL8366RB_PMCR 0x0007
74 #define RTL8366RB_PMCR_SOURCE_PORT(a) (a)
75 #define RTL8366RB_PMCR_SOURCE_PORT_MASK 0x000f
76 #define RTL8366RB_PMCR_MONITOR_PORT(a) ((a) << 4)
77 #define RTL8366RB_PMCR_MONITOR_PORT_MASK 0x00f0
78 #define RTL8366RB_PMCR_MIRROR_RX BIT(8)
79 #define RTL8366RB_PMCR_MIRROR_TX BIT(9)
80 #define RTL8366RB_PMCR_MIRROR_SPC BIT(10)
81 #define RTL8366RB_PMCR_MIRROR_ISO BIT(11)
82
83 /* bits 0..7 = port 0, bits 8..15 = port 1 */
84 #define RTL8366RB_PAACR0 0x0010
85 /* bits 0..7 = port 2, bits 8..15 = port 3 */
86 #define RTL8366RB_PAACR1 0x0011
87 /* bits 0..7 = port 4, bits 8..15 = port 5 */
88 #define RTL8366RB_PAACR2 0x0012
89 #define RTL8366RB_PAACR_SPEED_10M 0
90 #define RTL8366RB_PAACR_SPEED_100M 1
91 #define RTL8366RB_PAACR_SPEED_1000M 2
92 #define RTL8366RB_PAACR_FULL_DUPLEX BIT(2)
93 #define RTL8366RB_PAACR_LINK_UP BIT(4)
94 #define RTL8366RB_PAACR_TX_PAUSE BIT(5)
95 #define RTL8366RB_PAACR_RX_PAUSE BIT(6)
96 #define RTL8366RB_PAACR_AN BIT(7)
97
98 #define RTL8366RB_PAACR_CPU_PORT (RTL8366RB_PAACR_SPEED_1000M | \
99 RTL8366RB_PAACR_FULL_DUPLEX | \
100 RTL8366RB_PAACR_LINK_UP | \
101 RTL8366RB_PAACR_TX_PAUSE | \
102 RTL8366RB_PAACR_RX_PAUSE)
103
104 /* bits 0..7 = port 0, bits 8..15 = port 1 */
105 #define RTL8366RB_PSTAT0 0x0014
106 /* bits 0..7 = port 2, bits 8..15 = port 3 */
107 #define RTL8366RB_PSTAT1 0x0015
108 /* bits 0..7 = port 4, bits 8..15 = port 5 */
109 #define RTL8366RB_PSTAT2 0x0016
110
111 #define RTL8366RB_POWER_SAVING_REG 0x0021
112
113 /* Spanning tree status (STP) control, two bits per port per FID */
114 #define RTL8366RB_STP_STATE_BASE 0x0050 /* 0x0050..0x0057 */
115 #define RTL8366RB_STP_STATE_DISABLED 0x0
116 #define RTL8366RB_STP_STATE_BLOCKING 0x1
117 #define RTL8366RB_STP_STATE_LEARNING 0x2
118 #define RTL8366RB_STP_STATE_FORWARDING 0x3
119 #define RTL8366RB_STP_MASK GENMASK(1, 0)
120 #define RTL8366RB_STP_STATE(port, state) \
121 ((state) << ((port) * 2))
122 #define RTL8366RB_STP_STATE_MASK(port) \
123 RTL8366RB_STP_STATE((port), RTL8366RB_STP_MASK)
124
125 /* CPU port control reg */
126 #define RTL8368RB_CPU_CTRL_REG 0x0061
127 #define RTL8368RB_CPU_PORTS_MSK 0x00FF
128 /* Disables inserting custom tag length/type 0x8899 */
129 #define RTL8368RB_CPU_NO_TAG BIT(15)
130
131 #define RTL8366RB_SMAR0 0x0070 /* bits 0..15 */
132 #define RTL8366RB_SMAR1 0x0071 /* bits 16..31 */
133 #define RTL8366RB_SMAR2 0x0072 /* bits 32..47 */
134
135 #define RTL8366RB_RESET_CTRL_REG 0x0100
136 #define RTL8366RB_CHIP_CTRL_RESET_HW BIT(0)
137 #define RTL8366RB_CHIP_CTRL_RESET_SW BIT(1)
138
139 #define RTL8366RB_CHIP_ID_REG 0x0509
140 #define RTL8366RB_CHIP_ID_8366 0x5937
141 #define RTL8366RB_CHIP_VERSION_CTRL_REG 0x050A
142 #define RTL8366RB_CHIP_VERSION_MASK 0xf
143
144 /* PHY registers control */
145 #define RTL8366RB_PHY_ACCESS_CTRL_REG 0x8000
146 #define RTL8366RB_PHY_CTRL_READ BIT(0)
147 #define RTL8366RB_PHY_CTRL_WRITE 0
148 #define RTL8366RB_PHY_ACCESS_BUSY_REG 0x8001
149 #define RTL8366RB_PHY_INT_BUSY BIT(0)
150 #define RTL8366RB_PHY_EXT_BUSY BIT(4)
151 #define RTL8366RB_PHY_ACCESS_DATA_REG 0x8002
152 #define RTL8366RB_PHY_EXT_CTRL_REG 0x8010
153 #define RTL8366RB_PHY_EXT_WRDATA_REG 0x8011
154 #define RTL8366RB_PHY_EXT_RDDATA_REG 0x8012
155
156 #define RTL8366RB_PHY_REG_MASK 0x1f
157 #define RTL8366RB_PHY_PAGE_OFFSET 5
158 #define RTL8366RB_PHY_PAGE_MASK (0xf << 5)
159 #define RTL8366RB_PHY_NO_OFFSET 9
160 #define RTL8366RB_PHY_NO_MASK (0x1f << 9)
161
162 /* VLAN Ingress Control Register 1, one bit per port.
163 * bit 0 .. 5 will make the switch drop ingress frames without
164 * VID such as untagged or priority-tagged frames for respective
165 * port.
166 * bit 6 .. 11 will make the switch drop ingress frames carrying
167 * a C-tag with VID != 0 for respective port.
168 */
169 #define RTL8366RB_VLAN_INGRESS_CTRL1_REG 0x037E
170 #define RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) (BIT((port)) | BIT((port) + 6))
171
172 /* VLAN Ingress Control Register 2, one bit per port.
173 * bit0 .. bit5 will make the switch drop all ingress frames with
174 * a VLAN classification that does not include the port is in its
175 * member set.
176 */
177 #define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f
178
179 /* LED control registers */
180 #define RTL8366RB_LED_BLINKRATE_REG 0x0430
181 #define RTL8366RB_LED_BLINKRATE_MASK 0x0007
182 #define RTL8366RB_LED_BLINKRATE_28MS 0x0000
183 #define RTL8366RB_LED_BLINKRATE_56MS 0x0001
184 #define RTL8366RB_LED_BLINKRATE_84MS 0x0002
185 #define RTL8366RB_LED_BLINKRATE_111MS 0x0003
186 #define RTL8366RB_LED_BLINKRATE_222MS 0x0004
187 #define RTL8366RB_LED_BLINKRATE_446MS 0x0005
188
189 #define RTL8366RB_LED_CTRL_REG 0x0431
190 #define RTL8366RB_LED_OFF 0x0
191 #define RTL8366RB_LED_DUP_COL 0x1
192 #define RTL8366RB_LED_LINK_ACT 0x2
193 #define RTL8366RB_LED_SPD1000 0x3
194 #define RTL8366RB_LED_SPD100 0x4
195 #define RTL8366RB_LED_SPD10 0x5
196 #define RTL8366RB_LED_SPD1000_ACT 0x6
197 #define RTL8366RB_LED_SPD100_ACT 0x7
198 #define RTL8366RB_LED_SPD10_ACT 0x8
199 #define RTL8366RB_LED_SPD100_10_ACT 0x9
200 #define RTL8366RB_LED_FIBER 0xa
201 #define RTL8366RB_LED_AN_FAULT 0xb
202 #define RTL8366RB_LED_LINK_RX 0xc
203 #define RTL8366RB_LED_LINK_TX 0xd
204 #define RTL8366RB_LED_MASTER 0xe
205 #define RTL8366RB_LED_FORCE 0xf
206 #define RTL8366RB_LED_0_1_CTRL_REG 0x0432
207 #define RTL8366RB_LED_1_OFFSET 6
208 #define RTL8366RB_LED_2_3_CTRL_REG 0x0433
209 #define RTL8366RB_LED_3_OFFSET 6
210
211 #define RTL8366RB_MIB_COUNT 33
212 #define RTL8366RB_GLOBAL_MIB_COUNT 1
213 #define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050
214 #define RTL8366RB_MIB_COUNTER_BASE 0x1000
215 #define RTL8366RB_MIB_CTRL_REG 0x13F0
216 #define RTL8366RB_MIB_CTRL_USER_MASK 0x0FFC
217 #define RTL8366RB_MIB_CTRL_BUSY_MASK BIT(0)
218 #define RTL8366RB_MIB_CTRL_RESET_MASK BIT(1)
219 #define RTL8366RB_MIB_CTRL_PORT_RESET(_p) BIT(2 + (_p))
220 #define RTL8366RB_MIB_CTRL_GLOBAL_RESET BIT(11)
221
222 #define RTL8366RB_PORT_VLAN_CTRL_BASE 0x0063
223 #define RTL8366RB_PORT_VLAN_CTRL_REG(_p) \
224 (RTL8366RB_PORT_VLAN_CTRL_BASE + (_p) / 4)
225 #define RTL8366RB_PORT_VLAN_CTRL_MASK 0xf
226 #define RTL8366RB_PORT_VLAN_CTRL_SHIFT(_p) (4 * ((_p) % 4))
227
228 #define RTL8366RB_VLAN_TABLE_READ_BASE 0x018C
229 #define RTL8366RB_VLAN_TABLE_WRITE_BASE 0x0185
230
231 #define RTL8366RB_TABLE_ACCESS_CTRL_REG 0x0180
232 #define RTL8366RB_TABLE_VLAN_READ_CTRL 0x0E01
233 #define RTL8366RB_TABLE_VLAN_WRITE_CTRL 0x0F01
234
235 #define RTL8366RB_VLAN_MC_BASE(_x) (0x0020 + (_x) * 3)
236
237 #define RTL8366RB_PORT_LINK_STATUS_BASE 0x0014
238 #define RTL8366RB_PORT_STATUS_SPEED_MASK 0x0003
239 #define RTL8366RB_PORT_STATUS_DUPLEX_MASK 0x0004
240 #define RTL8366RB_PORT_STATUS_LINK_MASK 0x0010
241 #define RTL8366RB_PORT_STATUS_TXPAUSE_MASK 0x0020
242 #define RTL8366RB_PORT_STATUS_RXPAUSE_MASK 0x0040
243 #define RTL8366RB_PORT_STATUS_AN_MASK 0x0080
244
245 #define RTL8366RB_NUM_VLANS 16
246 #define RTL8366RB_NUM_LEDGROUPS 4
247 #define RTL8366RB_NUM_VIDS 4096
248 #define RTL8366RB_PRIORITYMAX 7
249 #define RTL8366RB_NUM_FIDS 8
250 #define RTL8366RB_FIDMAX 7
251
252 #define RTL8366RB_PORT_1 BIT(0) /* In userspace port 0 */
253 #define RTL8366RB_PORT_2 BIT(1) /* In userspace port 1 */
254 #define RTL8366RB_PORT_3 BIT(2) /* In userspace port 2 */
255 #define RTL8366RB_PORT_4 BIT(3) /* In userspace port 3 */
256 #define RTL8366RB_PORT_5 BIT(4) /* In userspace port 4 */
257
258 #define RTL8366RB_PORT_CPU BIT(5) /* CPU port */
259
260 #define RTL8366RB_PORT_ALL (RTL8366RB_PORT_1 | \
261 RTL8366RB_PORT_2 | \
262 RTL8366RB_PORT_3 | \
263 RTL8366RB_PORT_4 | \
264 RTL8366RB_PORT_5 | \
265 RTL8366RB_PORT_CPU)
266
267 #define RTL8366RB_PORT_ALL_BUT_CPU (RTL8366RB_PORT_1 | \
268 RTL8366RB_PORT_2 | \
269 RTL8366RB_PORT_3 | \
270 RTL8366RB_PORT_4 | \
271 RTL8366RB_PORT_5)
272
273 #define RTL8366RB_PORT_ALL_EXTERNAL (RTL8366RB_PORT_1 | \
274 RTL8366RB_PORT_2 | \
275 RTL8366RB_PORT_3 | \
276 RTL8366RB_PORT_4)
277
278 #define RTL8366RB_PORT_ALL_INTERNAL RTL8366RB_PORT_CPU
279
280 /* First configuration word per member config, VID and prio */
281 #define RTL8366RB_VLAN_VID_MASK 0xfff
282 #define RTL8366RB_VLAN_PRIORITY_SHIFT 12
283 #define RTL8366RB_VLAN_PRIORITY_MASK 0x7
284 /* Second configuration word per member config, member and untagged */
285 #define RTL8366RB_VLAN_UNTAG_SHIFT 8
286 #define RTL8366RB_VLAN_UNTAG_MASK 0xff
287 #define RTL8366RB_VLAN_MEMBER_MASK 0xff
288 /* Third config word per member config, STAG currently unused */
289 #define RTL8366RB_VLAN_STAG_MBR_MASK 0xff
290 #define RTL8366RB_VLAN_STAG_MBR_SHIFT 8
291 #define RTL8366RB_VLAN_STAG_IDX_MASK 0x7
292 #define RTL8366RB_VLAN_STAG_IDX_SHIFT 5
293 #define RTL8366RB_VLAN_FID_MASK 0x7
294
295 /* Port ingress bandwidth control */
296 #define RTL8366RB_IB_BASE 0x0200
297 #define RTL8366RB_IB_REG(pnum) (RTL8366RB_IB_BASE + (pnum))
298 #define RTL8366RB_IB_BDTH_MASK 0x3fff
299 #define RTL8366RB_IB_PREIFG BIT(14)
300
301 /* Port egress bandwidth control */
302 #define RTL8366RB_EB_BASE 0x02d1
303 #define RTL8366RB_EB_REG(pnum) (RTL8366RB_EB_BASE + (pnum))
304 #define RTL8366RB_EB_BDTH_MASK 0x3fff
305 #define RTL8366RB_EB_PREIFG_REG 0x02f8
306 #define RTL8366RB_EB_PREIFG BIT(9)
307
308 #define RTL8366RB_BDTH_SW_MAX 1048512 /* 1048576? */
309 #define RTL8366RB_BDTH_UNIT 64
310 #define RTL8366RB_BDTH_REG_DEFAULT 16383
311
312 /* QOS */
313 #define RTL8366RB_QOS BIT(15)
314 /* Include/Exclude Preamble and IFG (20 bytes). 0:Exclude, 1:Include. */
315 #define RTL8366RB_QOS_DEFAULT_PREIFG 1
316
317 /* Interrupt handling */
318 #define RTL8366RB_INTERRUPT_CONTROL_REG 0x0440
319 #define RTL8366RB_INTERRUPT_POLARITY BIT(0)
320 #define RTL8366RB_P4_RGMII_LED BIT(2)
321 #define RTL8366RB_INTERRUPT_MASK_REG 0x0441
322 #define RTL8366RB_INTERRUPT_LINK_CHGALL GENMASK(11, 0)
323 #define RTL8366RB_INTERRUPT_ACLEXCEED BIT(8)
324 #define RTL8366RB_INTERRUPT_STORMEXCEED BIT(9)
325 #define RTL8366RB_INTERRUPT_P4_FIBER BIT(12)
326 #define RTL8366RB_INTERRUPT_P4_UTP BIT(13)
327 #define RTL8366RB_INTERRUPT_VALID (RTL8366RB_INTERRUPT_LINK_CHGALL | \
328 RTL8366RB_INTERRUPT_ACLEXCEED | \
329 RTL8366RB_INTERRUPT_STORMEXCEED | \
330 RTL8366RB_INTERRUPT_P4_FIBER | \
331 RTL8366RB_INTERRUPT_P4_UTP)
332 #define RTL8366RB_INTERRUPT_STATUS_REG 0x0442
333 #define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */
334
335 /* Port isolation registers */
336 #define RTL8366RB_PORT_ISO_BASE 0x0F08
337 #define RTL8366RB_PORT_ISO(pnum) (RTL8366RB_PORT_ISO_BASE + (pnum))
338 #define RTL8366RB_PORT_ISO_EN BIT(0)
339 #define RTL8366RB_PORT_ISO_PORTS_MASK GENMASK(7, 1)
340 #define RTL8366RB_PORT_ISO_PORTS(pmask) ((pmask) << 1)
341
342 /* bits 0..5 enable force when cleared */
343 #define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11
344
345 #define RTL8366RB_OAM_PARSER_REG 0x0F14
346 #define RTL8366RB_OAM_MULTIPLEXER_REG 0x0F15
347
348 #define RTL8366RB_GREEN_FEATURE_REG 0x0F51
349 #define RTL8366RB_GREEN_FEATURE_MSK 0x0007
350 #define RTL8366RB_GREEN_FEATURE_TX BIT(0)
351 #define RTL8366RB_GREEN_FEATURE_RX BIT(2)
352
353 /**
354 * struct rtl8366rb - RTL8366RB-specific data
355 * @max_mtu: per-port max MTU setting
356 * @pvid_enabled: if PVID is set for respective port
357 */
358 struct rtl8366rb {
359 unsigned int max_mtu[RTL8366RB_NUM_PORTS];
360 bool pvid_enabled[RTL8366RB_NUM_PORTS];
361 };
362
363 static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
364 { 0, 0, 4, "IfInOctets" },
365 { 0, 4, 4, "EtherStatsOctets" },
366 { 0, 8, 2, "EtherStatsUnderSizePkts" },
367 { 0, 10, 2, "EtherFragments" },
368 { 0, 12, 2, "EtherStatsPkts64Octets" },
369 { 0, 14, 2, "EtherStatsPkts65to127Octets" },
370 { 0, 16, 2, "EtherStatsPkts128to255Octets" },
371 { 0, 18, 2, "EtherStatsPkts256to511Octets" },
372 { 0, 20, 2, "EtherStatsPkts512to1023Octets" },
373 { 0, 22, 2, "EtherStatsPkts1024to1518Octets" },
374 { 0, 24, 2, "EtherOversizeStats" },
375 { 0, 26, 2, "EtherStatsJabbers" },
376 { 0, 28, 2, "IfInUcastPkts" },
377 { 0, 30, 2, "EtherStatsMulticastPkts" },
378 { 0, 32, 2, "EtherStatsBroadcastPkts" },
379 { 0, 34, 2, "EtherStatsDropEvents" },
380 { 0, 36, 2, "Dot3StatsFCSErrors" },
381 { 0, 38, 2, "Dot3StatsSymbolErrors" },
382 { 0, 40, 2, "Dot3InPauseFrames" },
383 { 0, 42, 2, "Dot3ControlInUnknownOpcodes" },
384 { 0, 44, 4, "IfOutOctets" },
385 { 0, 48, 2, "Dot3StatsSingleCollisionFrames" },
386 { 0, 50, 2, "Dot3StatMultipleCollisionFrames" },
387 { 0, 52, 2, "Dot3sDeferredTransmissions" },
388 { 0, 54, 2, "Dot3StatsLateCollisions" },
389 { 0, 56, 2, "EtherStatsCollisions" },
390 { 0, 58, 2, "Dot3StatsExcessiveCollisions" },
391 { 0, 60, 2, "Dot3OutPauseFrames" },
392 { 0, 62, 2, "Dot1dBasePortDelayExceededDiscards" },
393 { 0, 64, 2, "Dot1dTpPortInDiscards" },
394 { 0, 66, 2, "IfOutUcastPkts" },
395 { 0, 68, 2, "IfOutMulticastPkts" },
396 { 0, 70, 2, "IfOutBroadcastPkts" },
397 };
398
rtl8366rb_get_mib_counter(struct realtek_priv * priv,int port,struct rtl8366_mib_counter * mib,u64 * mibvalue)399 static int rtl8366rb_get_mib_counter(struct realtek_priv *priv,
400 int port,
401 struct rtl8366_mib_counter *mib,
402 u64 *mibvalue)
403 {
404 u32 addr, val;
405 int ret;
406 int i;
407
408 addr = RTL8366RB_MIB_COUNTER_BASE +
409 RTL8366RB_MIB_COUNTER_PORT_OFFSET * (port) +
410 mib->offset;
411
412 /* Writing access counter address first
413 * then ASIC will prepare 64bits counter wait for being retrived
414 */
415 ret = regmap_write(priv->map, addr, 0); /* Write whatever */
416 if (ret)
417 return ret;
418
419 /* Read MIB control register */
420 ret = regmap_read(priv->map, RTL8366RB_MIB_CTRL_REG, &val);
421 if (ret)
422 return -EIO;
423
424 if (val & RTL8366RB_MIB_CTRL_BUSY_MASK)
425 return -EBUSY;
426
427 if (val & RTL8366RB_MIB_CTRL_RESET_MASK)
428 return -EIO;
429
430 /* Read each individual MIB 16 bits at the time */
431 *mibvalue = 0;
432 for (i = mib->length; i > 0; i--) {
433 ret = regmap_read(priv->map, addr + (i - 1), &val);
434 if (ret)
435 return ret;
436 *mibvalue = (*mibvalue << 16) | (val & 0xFFFF);
437 }
438 return 0;
439 }
440
rtl8366rb_get_irqmask(struct irq_data * d)441 static u32 rtl8366rb_get_irqmask(struct irq_data *d)
442 {
443 int line = irqd_to_hwirq(d);
444 u32 val;
445
446 /* For line interrupts we combine link down in bits
447 * 6..11 with link up in bits 0..5 into one interrupt.
448 */
449 if (line < 12)
450 val = BIT(line) | BIT(line + 6);
451 else
452 val = BIT(line);
453 return val;
454 }
455
rtl8366rb_mask_irq(struct irq_data * d)456 static void rtl8366rb_mask_irq(struct irq_data *d)
457 {
458 struct realtek_priv *priv = irq_data_get_irq_chip_data(d);
459 int ret;
460
461 ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_MASK_REG,
462 rtl8366rb_get_irqmask(d), 0);
463 if (ret)
464 dev_err(priv->dev, "could not mask IRQ\n");
465 }
466
rtl8366rb_unmask_irq(struct irq_data * d)467 static void rtl8366rb_unmask_irq(struct irq_data *d)
468 {
469 struct realtek_priv *priv = irq_data_get_irq_chip_data(d);
470 int ret;
471
472 ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_MASK_REG,
473 rtl8366rb_get_irqmask(d),
474 rtl8366rb_get_irqmask(d));
475 if (ret)
476 dev_err(priv->dev, "could not unmask IRQ\n");
477 }
478
rtl8366rb_irq(int irq,void * data)479 static irqreturn_t rtl8366rb_irq(int irq, void *data)
480 {
481 struct realtek_priv *priv = data;
482 u32 stat;
483 int ret;
484
485 /* This clears the IRQ status register */
486 ret = regmap_read(priv->map, RTL8366RB_INTERRUPT_STATUS_REG,
487 &stat);
488 if (ret) {
489 dev_err(priv->dev, "can't read interrupt status\n");
490 return IRQ_NONE;
491 }
492 stat &= RTL8366RB_INTERRUPT_VALID;
493 if (!stat)
494 return IRQ_NONE;
495 while (stat) {
496 int line = __ffs(stat);
497 int child_irq;
498
499 stat &= ~BIT(line);
500 /* For line interrupts we combine link down in bits
501 * 6..11 with link up in bits 0..5 into one interrupt.
502 */
503 if (line < 12 && line > 5)
504 line -= 5;
505 child_irq = irq_find_mapping(priv->irqdomain, line);
506 handle_nested_irq(child_irq);
507 }
508 return IRQ_HANDLED;
509 }
510
511 static struct irq_chip rtl8366rb_irq_chip = {
512 .name = "RTL8366RB",
513 .irq_mask = rtl8366rb_mask_irq,
514 .irq_unmask = rtl8366rb_unmask_irq,
515 };
516
rtl8366rb_irq_map(struct irq_domain * domain,unsigned int irq,irq_hw_number_t hwirq)517 static int rtl8366rb_irq_map(struct irq_domain *domain, unsigned int irq,
518 irq_hw_number_t hwirq)
519 {
520 irq_set_chip_data(irq, domain->host_data);
521 irq_set_chip_and_handler(irq, &rtl8366rb_irq_chip, handle_simple_irq);
522 irq_set_nested_thread(irq, 1);
523 irq_set_noprobe(irq);
524
525 return 0;
526 }
527
rtl8366rb_irq_unmap(struct irq_domain * d,unsigned int irq)528 static void rtl8366rb_irq_unmap(struct irq_domain *d, unsigned int irq)
529 {
530 irq_set_nested_thread(irq, 0);
531 irq_set_chip_and_handler(irq, NULL, NULL);
532 irq_set_chip_data(irq, NULL);
533 }
534
535 static const struct irq_domain_ops rtl8366rb_irqdomain_ops = {
536 .map = rtl8366rb_irq_map,
537 .unmap = rtl8366rb_irq_unmap,
538 .xlate = irq_domain_xlate_onecell,
539 };
540
rtl8366rb_setup_cascaded_irq(struct realtek_priv * priv)541 static int rtl8366rb_setup_cascaded_irq(struct realtek_priv *priv)
542 {
543 struct device_node *intc;
544 unsigned long irq_trig;
545 int irq;
546 int ret;
547 u32 val;
548 int i;
549
550 intc = of_get_child_by_name(priv->dev->of_node, "interrupt-controller");
551 if (!intc) {
552 dev_err(priv->dev, "missing child interrupt-controller node\n");
553 return -EINVAL;
554 }
555 /* RB8366RB IRQs cascade off this one */
556 irq = of_irq_get(intc, 0);
557 if (irq <= 0) {
558 dev_err(priv->dev, "failed to get parent IRQ\n");
559 ret = irq ? irq : -EINVAL;
560 goto out_put_node;
561 }
562
563 /* This clears the IRQ status register */
564 ret = regmap_read(priv->map, RTL8366RB_INTERRUPT_STATUS_REG,
565 &val);
566 if (ret) {
567 dev_err(priv->dev, "can't read interrupt status\n");
568 goto out_put_node;
569 }
570
571 /* Fetch IRQ edge information from the descriptor */
572 irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
573 switch (irq_trig) {
574 case IRQF_TRIGGER_RISING:
575 case IRQF_TRIGGER_HIGH:
576 dev_info(priv->dev, "active high/rising IRQ\n");
577 val = 0;
578 break;
579 case IRQF_TRIGGER_FALLING:
580 case IRQF_TRIGGER_LOW:
581 dev_info(priv->dev, "active low/falling IRQ\n");
582 val = RTL8366RB_INTERRUPT_POLARITY;
583 break;
584 }
585 ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_CONTROL_REG,
586 RTL8366RB_INTERRUPT_POLARITY,
587 val);
588 if (ret) {
589 dev_err(priv->dev, "could not configure IRQ polarity\n");
590 goto out_put_node;
591 }
592
593 ret = devm_request_threaded_irq(priv->dev, irq, NULL,
594 rtl8366rb_irq, IRQF_ONESHOT,
595 "RTL8366RB", priv);
596 if (ret) {
597 dev_err(priv->dev, "unable to request irq: %d\n", ret);
598 goto out_put_node;
599 }
600 priv->irqdomain = irq_domain_add_linear(intc,
601 RTL8366RB_NUM_INTERRUPT,
602 &rtl8366rb_irqdomain_ops,
603 priv);
604 if (!priv->irqdomain) {
605 dev_err(priv->dev, "failed to create IRQ domain\n");
606 ret = -EINVAL;
607 goto out_put_node;
608 }
609 for (i = 0; i < priv->num_ports; i++)
610 irq_set_parent(irq_create_mapping(priv->irqdomain, i), irq);
611
612 out_put_node:
613 of_node_put(intc);
614 return ret;
615 }
616
rtl8366rb_set_addr(struct realtek_priv * priv)617 static int rtl8366rb_set_addr(struct realtek_priv *priv)
618 {
619 u8 addr[ETH_ALEN];
620 u16 val;
621 int ret;
622
623 eth_random_addr(addr);
624
625 dev_info(priv->dev, "set MAC: %02X:%02X:%02X:%02X:%02X:%02X\n",
626 addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
627 val = addr[0] << 8 | addr[1];
628 ret = regmap_write(priv->map, RTL8366RB_SMAR0, val);
629 if (ret)
630 return ret;
631 val = addr[2] << 8 | addr[3];
632 ret = regmap_write(priv->map, RTL8366RB_SMAR1, val);
633 if (ret)
634 return ret;
635 val = addr[4] << 8 | addr[5];
636 ret = regmap_write(priv->map, RTL8366RB_SMAR2, val);
637 if (ret)
638 return ret;
639
640 return 0;
641 }
642
643 /* Found in a vendor driver */
644
645 /* Struct for handling the jam tables' entries */
646 struct rtl8366rb_jam_tbl_entry {
647 u16 reg;
648 u16 val;
649 };
650
651 /* For the "version 0" early silicon, appear in most source releases */
652 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_0[] = {
653 {0x000B, 0x0001}, {0x03A6, 0x0100}, {0x03A7, 0x0001}, {0x02D1, 0x3FFF},
654 {0x02D2, 0x3FFF}, {0x02D3, 0x3FFF}, {0x02D4, 0x3FFF}, {0x02D5, 0x3FFF},
655 {0x02D6, 0x3FFF}, {0x02D7, 0x3FFF}, {0x02D8, 0x3FFF}, {0x022B, 0x0688},
656 {0x022C, 0x0FAC}, {0x03D0, 0x4688}, {0x03D1, 0x01F5}, {0x0000, 0x0830},
657 {0x02F9, 0x0200}, {0x02F7, 0x7FFF}, {0x02F8, 0x03FF}, {0x0080, 0x03E8},
658 {0x0081, 0x00CE}, {0x0082, 0x00DA}, {0x0083, 0x0230}, {0xBE0F, 0x2000},
659 {0x0231, 0x422A}, {0x0232, 0x422A}, {0x0233, 0x422A}, {0x0234, 0x422A},
660 {0x0235, 0x422A}, {0x0236, 0x422A}, {0x0237, 0x422A}, {0x0238, 0x422A},
661 {0x0239, 0x422A}, {0x023A, 0x422A}, {0x023B, 0x422A}, {0x023C, 0x422A},
662 {0x023D, 0x422A}, {0x023E, 0x422A}, {0x023F, 0x422A}, {0x0240, 0x422A},
663 {0x0241, 0x422A}, {0x0242, 0x422A}, {0x0243, 0x422A}, {0x0244, 0x422A},
664 {0x0245, 0x422A}, {0x0246, 0x422A}, {0x0247, 0x422A}, {0x0248, 0x422A},
665 {0x0249, 0x0146}, {0x024A, 0x0146}, {0x024B, 0x0146}, {0xBE03, 0xC961},
666 {0x024D, 0x0146}, {0x024E, 0x0146}, {0x024F, 0x0146}, {0x0250, 0x0146},
667 {0xBE64, 0x0226}, {0x0252, 0x0146}, {0x0253, 0x0146}, {0x024C, 0x0146},
668 {0x0251, 0x0146}, {0x0254, 0x0146}, {0xBE62, 0x3FD0}, {0x0084, 0x0320},
669 {0x0255, 0x0146}, {0x0256, 0x0146}, {0x0257, 0x0146}, {0x0258, 0x0146},
670 {0x0259, 0x0146}, {0x025A, 0x0146}, {0x025B, 0x0146}, {0x025C, 0x0146},
671 {0x025D, 0x0146}, {0x025E, 0x0146}, {0x025F, 0x0146}, {0x0260, 0x0146},
672 {0x0261, 0xA23F}, {0x0262, 0x0294}, {0x0263, 0xA23F}, {0x0264, 0x0294},
673 {0x0265, 0xA23F}, {0x0266, 0x0294}, {0x0267, 0xA23F}, {0x0268, 0x0294},
674 {0x0269, 0xA23F}, {0x026A, 0x0294}, {0x026B, 0xA23F}, {0x026C, 0x0294},
675 {0x026D, 0xA23F}, {0x026E, 0x0294}, {0x026F, 0xA23F}, {0x0270, 0x0294},
676 {0x02F5, 0x0048}, {0xBE09, 0x0E00}, {0xBE1E, 0x0FA0}, {0xBE14, 0x8448},
677 {0xBE15, 0x1007}, {0xBE4A, 0xA284}, {0xC454, 0x3F0B}, {0xC474, 0x3F0B},
678 {0xBE48, 0x3672}, {0xBE4B, 0x17A7}, {0xBE4C, 0x0B15}, {0xBE52, 0x0EDD},
679 {0xBE49, 0x8C00}, {0xBE5B, 0x785C}, {0xBE5C, 0x785C}, {0xBE5D, 0x785C},
680 {0xBE61, 0x368A}, {0xBE63, 0x9B84}, {0xC456, 0xCC13}, {0xC476, 0xCC13},
681 {0xBE65, 0x307D}, {0xBE6D, 0x0005}, {0xBE6E, 0xE120}, {0xBE2E, 0x7BAF},
682 };
683
684 /* This v1 init sequence is from Belkin F5D8235 U-Boot release */
685 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_1[] = {
686 {0x0000, 0x0830}, {0x0001, 0x8000}, {0x0400, 0x8130}, {0xBE78, 0x3C3C},
687 {0x0431, 0x5432}, {0xBE37, 0x0CE4}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0},
688 {0xC44C, 0x1585}, {0xC44C, 0x1185}, {0xC44C, 0x1585}, {0xC46C, 0x1585},
689 {0xC46C, 0x1185}, {0xC46C, 0x1585}, {0xC451, 0x2135}, {0xC471, 0x2135},
690 {0xBE10, 0x8140}, {0xBE15, 0x0007}, {0xBE6E, 0xE120}, {0xBE69, 0xD20F},
691 {0xBE6B, 0x0320}, {0xBE24, 0xB000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF20},
692 {0xBE21, 0x0140}, {0xBE20, 0x00BB}, {0xBE24, 0xB800}, {0xBE24, 0x0000},
693 {0xBE24, 0x7000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF60}, {0xBE21, 0x0140},
694 {0xBE20, 0x0077}, {0xBE24, 0x7800}, {0xBE24, 0x0000}, {0xBE2E, 0x7B7A},
695 {0xBE36, 0x0CE4}, {0x02F5, 0x0048}, {0xBE77, 0x2940}, {0x000A, 0x83E0},
696 {0xBE79, 0x3C3C}, {0xBE00, 0x1340},
697 };
698
699 /* This v2 init sequence is from Belkin F5D8235 U-Boot release */
700 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_2[] = {
701 {0x0450, 0x0000}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0431, 0x5432},
702 {0xC44F, 0x6250}, {0xC46F, 0x6250}, {0xC456, 0x0C14}, {0xC476, 0x0C14},
703 {0xC44C, 0x1C85}, {0xC44C, 0x1885}, {0xC44C, 0x1C85}, {0xC46C, 0x1C85},
704 {0xC46C, 0x1885}, {0xC46C, 0x1C85}, {0xC44C, 0x0885}, {0xC44C, 0x0881},
705 {0xC44C, 0x0885}, {0xC46C, 0x0885}, {0xC46C, 0x0881}, {0xC46C, 0x0885},
706 {0xBE2E, 0x7BA7}, {0xBE36, 0x1000}, {0xBE37, 0x1000}, {0x8000, 0x0001},
707 {0xBE69, 0xD50F}, {0x8000, 0x0000}, {0xBE69, 0xD50F}, {0xBE6E, 0x0320},
708 {0xBE77, 0x2940}, {0xBE78, 0x3C3C}, {0xBE79, 0x3C3C}, {0xBE6E, 0xE120},
709 {0x8000, 0x0001}, {0xBE15, 0x1007}, {0x8000, 0x0000}, {0xBE15, 0x1007},
710 {0xBE14, 0x0448}, {0xBE1E, 0x00A0}, {0xBE10, 0x8160}, {0xBE10, 0x8140},
711 {0xBE00, 0x1340}, {0x0F51, 0x0010},
712 };
713
714 /* Appears in a DDWRT code dump */
715 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_3[] = {
716 {0x0000, 0x0830}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0431, 0x5432},
717 {0x0F51, 0x0017}, {0x02F5, 0x0048}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0},
718 {0xC456, 0x0C14}, {0xC476, 0x0C14}, {0xC454, 0x3F8B}, {0xC474, 0x3F8B},
719 {0xC450, 0x2071}, {0xC470, 0x2071}, {0xC451, 0x226B}, {0xC471, 0x226B},
720 {0xC452, 0xA293}, {0xC472, 0xA293}, {0xC44C, 0x1585}, {0xC44C, 0x1185},
721 {0xC44C, 0x1585}, {0xC46C, 0x1585}, {0xC46C, 0x1185}, {0xC46C, 0x1585},
722 {0xC44C, 0x0185}, {0xC44C, 0x0181}, {0xC44C, 0x0185}, {0xC46C, 0x0185},
723 {0xC46C, 0x0181}, {0xC46C, 0x0185}, {0xBE24, 0xB000}, {0xBE23, 0xFF51},
724 {0xBE22, 0xDF20}, {0xBE21, 0x0140}, {0xBE20, 0x00BB}, {0xBE24, 0xB800},
725 {0xBE24, 0x0000}, {0xBE24, 0x7000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF60},
726 {0xBE21, 0x0140}, {0xBE20, 0x0077}, {0xBE24, 0x7800}, {0xBE24, 0x0000},
727 {0xBE2E, 0x7BA7}, {0xBE36, 0x1000}, {0xBE37, 0x1000}, {0x8000, 0x0001},
728 {0xBE69, 0xD50F}, {0x8000, 0x0000}, {0xBE69, 0xD50F}, {0xBE6B, 0x0320},
729 {0xBE77, 0x2800}, {0xBE78, 0x3C3C}, {0xBE79, 0x3C3C}, {0xBE6E, 0xE120},
730 {0x8000, 0x0001}, {0xBE10, 0x8140}, {0x8000, 0x0000}, {0xBE10, 0x8140},
731 {0xBE15, 0x1007}, {0xBE14, 0x0448}, {0xBE1E, 0x00A0}, {0xBE10, 0x8160},
732 {0xBE10, 0x8140}, {0xBE00, 0x1340}, {0x0450, 0x0000}, {0x0401, 0x0000},
733 };
734
735 /* Belkin F5D8235 v1, "belkin,f5d8235-v1" */
736 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_f5d8235[] = {
737 {0x0242, 0x02BF}, {0x0245, 0x02BF}, {0x0248, 0x02BF}, {0x024B, 0x02BF},
738 {0x024E, 0x02BF}, {0x0251, 0x02BF}, {0x0254, 0x0A3F}, {0x0256, 0x0A3F},
739 {0x0258, 0x0A3F}, {0x025A, 0x0A3F}, {0x025C, 0x0A3F}, {0x025E, 0x0A3F},
740 {0x0263, 0x007C}, {0x0100, 0x0004}, {0xBE5B, 0x3500}, {0x800E, 0x200F},
741 {0xBE1D, 0x0F00}, {0x8001, 0x5011}, {0x800A, 0xA2F4}, {0x800B, 0x17A3},
742 {0xBE4B, 0x17A3}, {0xBE41, 0x5011}, {0xBE17, 0x2100}, {0x8000, 0x8304},
743 {0xBE40, 0x8304}, {0xBE4A, 0xA2F4}, {0x800C, 0xA8D5}, {0x8014, 0x5500},
744 {0x8015, 0x0004}, {0xBE4C, 0xA8D5}, {0xBE59, 0x0008}, {0xBE09, 0x0E00},
745 {0xBE36, 0x1036}, {0xBE37, 0x1036}, {0x800D, 0x00FF}, {0xBE4D, 0x00FF},
746 };
747
748 /* DGN3500, "netgear,dgn3500", "netgear,dgn3500b" */
749 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_dgn3500[] = {
750 {0x0000, 0x0830}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0F51, 0x0017},
751 {0x02F5, 0x0048}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0}, {0x0450, 0x0000},
752 {0x0401, 0x0000}, {0x0431, 0x0960},
753 };
754
755 /* This jam table activates "green ethernet", which means low power mode
756 * and is claimed to detect the cable length and not use more power than
757 * necessary, and the ports should enter power saving mode 10 seconds after
758 * a cable is disconnected. Seems to always be the same.
759 */
760 static const struct rtl8366rb_jam_tbl_entry rtl8366rb_green_jam[] = {
761 {0xBE78, 0x323C}, {0xBE77, 0x5000}, {0xBE2E, 0x7BA7},
762 {0xBE59, 0x3459}, {0xBE5A, 0x745A}, {0xBE5B, 0x785C},
763 {0xBE5C, 0x785C}, {0xBE6E, 0xE120}, {0xBE79, 0x323C},
764 };
765
766 /* Function that jams the tables in the proper registers */
rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry * jam_table,int jam_size,struct realtek_priv * priv,bool write_dbg)767 static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table,
768 int jam_size, struct realtek_priv *priv,
769 bool write_dbg)
770 {
771 u32 val;
772 int ret;
773 int i;
774
775 for (i = 0; i < jam_size; i++) {
776 if ((jam_table[i].reg & 0xBE00) == 0xBE00) {
777 ret = regmap_read(priv->map,
778 RTL8366RB_PHY_ACCESS_BUSY_REG,
779 &val);
780 if (ret)
781 return ret;
782 if (!(val & RTL8366RB_PHY_INT_BUSY)) {
783 ret = regmap_write(priv->map,
784 RTL8366RB_PHY_ACCESS_CTRL_REG,
785 RTL8366RB_PHY_CTRL_WRITE);
786 if (ret)
787 return ret;
788 }
789 }
790 if (write_dbg)
791 dev_dbg(priv->dev, "jam %04x into register %04x\n",
792 jam_table[i].val,
793 jam_table[i].reg);
794 ret = regmap_write(priv->map,
795 jam_table[i].reg,
796 jam_table[i].val);
797 if (ret)
798 return ret;
799 }
800 return 0;
801 }
802
rtl8366rb_setup(struct dsa_switch * ds)803 static int rtl8366rb_setup(struct dsa_switch *ds)
804 {
805 struct realtek_priv *priv = ds->priv;
806 const struct rtl8366rb_jam_tbl_entry *jam_table;
807 struct rtl8366rb *rb;
808 u32 chip_ver = 0;
809 u32 chip_id = 0;
810 int jam_size;
811 u32 val;
812 int ret;
813 int i;
814
815 rb = priv->chip_data;
816
817 ret = regmap_read(priv->map, RTL8366RB_CHIP_ID_REG, &chip_id);
818 if (ret) {
819 dev_err(priv->dev, "unable to read chip id\n");
820 return ret;
821 }
822
823 switch (chip_id) {
824 case RTL8366RB_CHIP_ID_8366:
825 break;
826 default:
827 dev_err(priv->dev, "unknown chip id (%04x)\n", chip_id);
828 return -ENODEV;
829 }
830
831 ret = regmap_read(priv->map, RTL8366RB_CHIP_VERSION_CTRL_REG,
832 &chip_ver);
833 if (ret) {
834 dev_err(priv->dev, "unable to read chip version\n");
835 return ret;
836 }
837
838 dev_info(priv->dev, "RTL%04x ver %u chip found\n",
839 chip_id, chip_ver & RTL8366RB_CHIP_VERSION_MASK);
840
841 /* Do the init dance using the right jam table */
842 switch (chip_ver) {
843 case 0:
844 jam_table = rtl8366rb_init_jam_ver_0;
845 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_0);
846 break;
847 case 1:
848 jam_table = rtl8366rb_init_jam_ver_1;
849 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_1);
850 break;
851 case 2:
852 jam_table = rtl8366rb_init_jam_ver_2;
853 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_2);
854 break;
855 default:
856 jam_table = rtl8366rb_init_jam_ver_3;
857 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_3);
858 break;
859 }
860
861 /* Special jam tables for special routers
862 * TODO: are these necessary? Maintainers, please test
863 * without them, using just the off-the-shelf tables.
864 */
865 if (of_machine_is_compatible("belkin,f5d8235-v1")) {
866 jam_table = rtl8366rb_init_jam_f5d8235;
867 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_f5d8235);
868 }
869 if (of_machine_is_compatible("netgear,dgn3500") ||
870 of_machine_is_compatible("netgear,dgn3500b")) {
871 jam_table = rtl8366rb_init_jam_dgn3500;
872 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_dgn3500);
873 }
874
875 ret = rtl8366rb_jam_table(jam_table, jam_size, priv, true);
876 if (ret)
877 return ret;
878
879 /* Isolate all user ports so they can only send packets to itself and the CPU port */
880 for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
881 ret = regmap_write(priv->map, RTL8366RB_PORT_ISO(i),
882 RTL8366RB_PORT_ISO_PORTS(BIT(RTL8366RB_PORT_NUM_CPU)) |
883 RTL8366RB_PORT_ISO_EN);
884 if (ret)
885 return ret;
886 }
887 /* CPU port can send packets to all ports */
888 ret = regmap_write(priv->map, RTL8366RB_PORT_ISO(RTL8366RB_PORT_NUM_CPU),
889 RTL8366RB_PORT_ISO_PORTS(dsa_user_ports(ds)) |
890 RTL8366RB_PORT_ISO_EN);
891 if (ret)
892 return ret;
893
894 /* Set up the "green ethernet" feature */
895 ret = rtl8366rb_jam_table(rtl8366rb_green_jam,
896 ARRAY_SIZE(rtl8366rb_green_jam), priv, false);
897 if (ret)
898 return ret;
899
900 ret = regmap_write(priv->map,
901 RTL8366RB_GREEN_FEATURE_REG,
902 (chip_ver == 1) ? 0x0007 : 0x0003);
903 if (ret)
904 return ret;
905
906 /* Vendor driver sets 0x240 in registers 0xc and 0xd (undocumented) */
907 ret = regmap_write(priv->map, 0x0c, 0x240);
908 if (ret)
909 return ret;
910 ret = regmap_write(priv->map, 0x0d, 0x240);
911 if (ret)
912 return ret;
913
914 /* Set some random MAC address */
915 ret = rtl8366rb_set_addr(priv);
916 if (ret)
917 return ret;
918
919 /* Enable CPU port with custom DSA tag 8899.
920 *
921 * If you set RTL8368RB_CPU_NO_TAG (bit 15) in this registers
922 * the custom tag is turned off.
923 */
924 ret = regmap_update_bits(priv->map, RTL8368RB_CPU_CTRL_REG,
925 0xFFFF,
926 BIT(priv->cpu_port));
927 if (ret)
928 return ret;
929
930 /* Make sure we default-enable the fixed CPU port */
931 ret = regmap_update_bits(priv->map, RTL8366RB_PECR,
932 BIT(priv->cpu_port),
933 0);
934 if (ret)
935 return ret;
936
937 /* Set maximum packet length to 1536 bytes */
938 ret = regmap_update_bits(priv->map, RTL8366RB_SGCR,
939 RTL8366RB_SGCR_MAX_LENGTH_MASK,
940 RTL8366RB_SGCR_MAX_LENGTH_1536);
941 if (ret)
942 return ret;
943 for (i = 0; i < RTL8366RB_NUM_PORTS; i++)
944 /* layer 2 size, see rtl8366rb_change_mtu() */
945 rb->max_mtu[i] = 1532;
946
947 /* Disable learning for all ports */
948 ret = regmap_write(priv->map, RTL8366RB_PORT_LEARNDIS_CTRL,
949 RTL8366RB_PORT_ALL);
950 if (ret)
951 return ret;
952
953 /* Enable auto ageing for all ports */
954 ret = regmap_write(priv->map, RTL8366RB_SECURITY_CTRL, 0);
955 if (ret)
956 return ret;
957
958 /* Port 4 setup: this enables Port 4, usually the WAN port,
959 * common PHY IO mode is apparently mode 0, and this is not what
960 * the port is initialized to. There is no explanation of the
961 * IO modes in the Realtek source code, if your WAN port is
962 * connected to something exotic such as fiber, then this might
963 * be worth experimenting with.
964 */
965 ret = regmap_update_bits(priv->map, RTL8366RB_PMC0,
966 RTL8366RB_PMC0_P4_IOMODE_MASK,
967 0 << RTL8366RB_PMC0_P4_IOMODE_SHIFT);
968 if (ret)
969 return ret;
970
971 /* Accept all packets by default, we enable filtering on-demand */
972 ret = regmap_write(priv->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
973 0);
974 if (ret)
975 return ret;
976 ret = regmap_write(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
977 0);
978 if (ret)
979 return ret;
980
981 /* Don't drop packets whose DA has not been learned */
982 ret = regmap_update_bits(priv->map, RTL8366RB_SSCR2,
983 RTL8366RB_SSCR2_DROP_UNKNOWN_DA, 0);
984 if (ret)
985 return ret;
986
987 /* Set blinking, TODO: make this configurable */
988 ret = regmap_update_bits(priv->map, RTL8366RB_LED_BLINKRATE_REG,
989 RTL8366RB_LED_BLINKRATE_MASK,
990 RTL8366RB_LED_BLINKRATE_56MS);
991 if (ret)
992 return ret;
993
994 /* Set up LED activity:
995 * Each port has 4 LEDs, we configure all ports to the same
996 * behaviour (no individual config) but we can set up each
997 * LED separately.
998 */
999 if (priv->leds_disabled) {
1000 /* Turn everything off */
1001 regmap_update_bits(priv->map,
1002 RTL8366RB_LED_0_1_CTRL_REG,
1003 0x0FFF, 0);
1004 regmap_update_bits(priv->map,
1005 RTL8366RB_LED_2_3_CTRL_REG,
1006 0x0FFF, 0);
1007 regmap_update_bits(priv->map,
1008 RTL8366RB_INTERRUPT_CONTROL_REG,
1009 RTL8366RB_P4_RGMII_LED,
1010 0);
1011 val = RTL8366RB_LED_OFF;
1012 } else {
1013 /* TODO: make this configurable per LED */
1014 val = RTL8366RB_LED_FORCE;
1015 }
1016 for (i = 0; i < 4; i++) {
1017 ret = regmap_update_bits(priv->map,
1018 RTL8366RB_LED_CTRL_REG,
1019 0xf << (i * 4),
1020 val << (i * 4));
1021 if (ret)
1022 return ret;
1023 }
1024
1025 ret = rtl8366_reset_vlan(priv);
1026 if (ret)
1027 return ret;
1028
1029 ret = rtl8366rb_setup_cascaded_irq(priv);
1030 if (ret)
1031 dev_info(priv->dev, "no interrupt support\n");
1032
1033 if (priv->setup_interface) {
1034 ret = priv->setup_interface(ds);
1035 if (ret) {
1036 dev_err(priv->dev, "could not set up MDIO bus\n");
1037 return -ENODEV;
1038 }
1039 }
1040
1041 return 0;
1042 }
1043
rtl8366_get_tag_protocol(struct dsa_switch * ds,int port,enum dsa_tag_protocol mp)1044 static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds,
1045 int port,
1046 enum dsa_tag_protocol mp)
1047 {
1048 /* This switch uses the 4 byte protocol A Realtek DSA tag */
1049 return DSA_TAG_PROTO_RTL4_A;
1050 }
1051
1052 static void
rtl8366rb_mac_link_up(struct dsa_switch * ds,int port,unsigned int mode,phy_interface_t interface,struct phy_device * phydev,int speed,int duplex,bool tx_pause,bool rx_pause)1053 rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
1054 phy_interface_t interface, struct phy_device *phydev,
1055 int speed, int duplex, bool tx_pause, bool rx_pause)
1056 {
1057 struct realtek_priv *priv = ds->priv;
1058 int ret;
1059
1060 if (port != priv->cpu_port)
1061 return;
1062
1063 dev_dbg(priv->dev, "MAC link up on CPU port (%d)\n", port);
1064
1065 /* Force the fixed CPU port into 1Gbit mode, no autonegotiation */
1066 ret = regmap_update_bits(priv->map, RTL8366RB_MAC_FORCE_CTRL_REG,
1067 BIT(port), BIT(port));
1068 if (ret) {
1069 dev_err(priv->dev, "failed to force 1Gbit on CPU port\n");
1070 return;
1071 }
1072
1073 ret = regmap_update_bits(priv->map, RTL8366RB_PAACR2,
1074 0xFF00U,
1075 RTL8366RB_PAACR_CPU_PORT << 8);
1076 if (ret) {
1077 dev_err(priv->dev, "failed to set PAACR on CPU port\n");
1078 return;
1079 }
1080
1081 /* Enable the CPU port */
1082 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
1083 0);
1084 if (ret) {
1085 dev_err(priv->dev, "failed to enable the CPU port\n");
1086 return;
1087 }
1088 }
1089
1090 static void
rtl8366rb_mac_link_down(struct dsa_switch * ds,int port,unsigned int mode,phy_interface_t interface)1091 rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
1092 phy_interface_t interface)
1093 {
1094 struct realtek_priv *priv = ds->priv;
1095 int ret;
1096
1097 if (port != priv->cpu_port)
1098 return;
1099
1100 dev_dbg(priv->dev, "MAC link down on CPU port (%d)\n", port);
1101
1102 /* Disable the CPU port */
1103 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
1104 BIT(port));
1105 if (ret) {
1106 dev_err(priv->dev, "failed to disable the CPU port\n");
1107 return;
1108 }
1109 }
1110
rb8366rb_set_port_led(struct realtek_priv * priv,int port,bool enable)1111 static void rb8366rb_set_port_led(struct realtek_priv *priv,
1112 int port, bool enable)
1113 {
1114 u16 val = enable ? 0x3f : 0;
1115 int ret;
1116
1117 if (priv->leds_disabled)
1118 return;
1119
1120 switch (port) {
1121 case 0:
1122 ret = regmap_update_bits(priv->map,
1123 RTL8366RB_LED_0_1_CTRL_REG,
1124 0x3F, val);
1125 break;
1126 case 1:
1127 ret = regmap_update_bits(priv->map,
1128 RTL8366RB_LED_0_1_CTRL_REG,
1129 0x3F << RTL8366RB_LED_1_OFFSET,
1130 val << RTL8366RB_LED_1_OFFSET);
1131 break;
1132 case 2:
1133 ret = regmap_update_bits(priv->map,
1134 RTL8366RB_LED_2_3_CTRL_REG,
1135 0x3F, val);
1136 break;
1137 case 3:
1138 ret = regmap_update_bits(priv->map,
1139 RTL8366RB_LED_2_3_CTRL_REG,
1140 0x3F << RTL8366RB_LED_3_OFFSET,
1141 val << RTL8366RB_LED_3_OFFSET);
1142 break;
1143 case 4:
1144 ret = regmap_update_bits(priv->map,
1145 RTL8366RB_INTERRUPT_CONTROL_REG,
1146 RTL8366RB_P4_RGMII_LED,
1147 enable ? RTL8366RB_P4_RGMII_LED : 0);
1148 break;
1149 default:
1150 dev_err(priv->dev, "no LED for port %d\n", port);
1151 return;
1152 }
1153 if (ret)
1154 dev_err(priv->dev, "error updating LED on port %d\n", port);
1155 }
1156
1157 static int
rtl8366rb_port_enable(struct dsa_switch * ds,int port,struct phy_device * phy)1158 rtl8366rb_port_enable(struct dsa_switch *ds, int port,
1159 struct phy_device *phy)
1160 {
1161 struct realtek_priv *priv = ds->priv;
1162 int ret;
1163
1164 dev_dbg(priv->dev, "enable port %d\n", port);
1165 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
1166 0);
1167 if (ret)
1168 return ret;
1169
1170 rb8366rb_set_port_led(priv, port, true);
1171 return 0;
1172 }
1173
1174 static void
rtl8366rb_port_disable(struct dsa_switch * ds,int port)1175 rtl8366rb_port_disable(struct dsa_switch *ds, int port)
1176 {
1177 struct realtek_priv *priv = ds->priv;
1178 int ret;
1179
1180 dev_dbg(priv->dev, "disable port %d\n", port);
1181 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
1182 BIT(port));
1183 if (ret)
1184 return;
1185
1186 rb8366rb_set_port_led(priv, port, false);
1187 }
1188
1189 static int
rtl8366rb_port_bridge_join(struct dsa_switch * ds,int port,struct dsa_bridge bridge,bool * tx_fwd_offload,struct netlink_ext_ack * extack)1190 rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port,
1191 struct dsa_bridge bridge,
1192 bool *tx_fwd_offload,
1193 struct netlink_ext_ack *extack)
1194 {
1195 struct realtek_priv *priv = ds->priv;
1196 unsigned int port_bitmap = 0;
1197 int ret, i;
1198
1199 /* Loop over all other ports than the current one */
1200 for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
1201 /* Current port handled last */
1202 if (i == port)
1203 continue;
1204 /* Not on this bridge */
1205 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1206 continue;
1207 /* Join this port to each other port on the bridge */
1208 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(i),
1209 RTL8366RB_PORT_ISO_PORTS(BIT(port)),
1210 RTL8366RB_PORT_ISO_PORTS(BIT(port)));
1211 if (ret)
1212 dev_err(priv->dev, "failed to join port %d\n", port);
1213
1214 port_bitmap |= BIT(i);
1215 }
1216
1217 /* Set the bits for the ports we can access */
1218 return regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(port),
1219 RTL8366RB_PORT_ISO_PORTS(port_bitmap),
1220 RTL8366RB_PORT_ISO_PORTS(port_bitmap));
1221 }
1222
1223 static void
rtl8366rb_port_bridge_leave(struct dsa_switch * ds,int port,struct dsa_bridge bridge)1224 rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
1225 struct dsa_bridge bridge)
1226 {
1227 struct realtek_priv *priv = ds->priv;
1228 unsigned int port_bitmap = 0;
1229 int ret, i;
1230
1231 /* Loop over all other ports than this one */
1232 for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
1233 /* Current port handled last */
1234 if (i == port)
1235 continue;
1236 /* Not on this bridge */
1237 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1238 continue;
1239 /* Remove this port from any other port on the bridge */
1240 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(i),
1241 RTL8366RB_PORT_ISO_PORTS(BIT(port)), 0);
1242 if (ret)
1243 dev_err(priv->dev, "failed to leave port %d\n", port);
1244
1245 port_bitmap |= BIT(i);
1246 }
1247
1248 /* Clear the bits for the ports we can not access, leave ourselves */
1249 regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(port),
1250 RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0);
1251 }
1252
1253 /**
1254 * rtl8366rb_drop_untagged() - make the switch drop untagged and C-tagged frames
1255 * @priv: SMI state container
1256 * @port: the port to drop untagged and C-tagged frames on
1257 * @drop: whether to drop or pass untagged and C-tagged frames
1258 *
1259 * Return: zero for success, a negative number on error.
1260 */
rtl8366rb_drop_untagged(struct realtek_priv * priv,int port,bool drop)1261 static int rtl8366rb_drop_untagged(struct realtek_priv *priv, int port, bool drop)
1262 {
1263 return regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
1264 RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port),
1265 drop ? RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) : 0);
1266 }
1267
rtl8366rb_vlan_filtering(struct dsa_switch * ds,int port,bool vlan_filtering,struct netlink_ext_ack * extack)1268 static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port,
1269 bool vlan_filtering,
1270 struct netlink_ext_ack *extack)
1271 {
1272 struct realtek_priv *priv = ds->priv;
1273 struct rtl8366rb *rb;
1274 int ret;
1275
1276 rb = priv->chip_data;
1277
1278 dev_dbg(priv->dev, "port %d: %s VLAN filtering\n", port,
1279 vlan_filtering ? "enable" : "disable");
1280
1281 /* If the port is not in the member set, the frame will be dropped */
1282 ret = regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
1283 BIT(port), vlan_filtering ? BIT(port) : 0);
1284 if (ret)
1285 return ret;
1286
1287 /* If VLAN filtering is enabled and PVID is also enabled, we must
1288 * not drop any untagged or C-tagged frames. If we turn off VLAN
1289 * filtering on a port, we need to accept any frames.
1290 */
1291 if (vlan_filtering)
1292 ret = rtl8366rb_drop_untagged(priv, port, !rb->pvid_enabled[port]);
1293 else
1294 ret = rtl8366rb_drop_untagged(priv, port, false);
1295
1296 return ret;
1297 }
1298
1299 static int
rtl8366rb_port_pre_bridge_flags(struct dsa_switch * ds,int port,struct switchdev_brport_flags flags,struct netlink_ext_ack * extack)1300 rtl8366rb_port_pre_bridge_flags(struct dsa_switch *ds, int port,
1301 struct switchdev_brport_flags flags,
1302 struct netlink_ext_ack *extack)
1303 {
1304 /* We support enabling/disabling learning */
1305 if (flags.mask & ~(BR_LEARNING))
1306 return -EINVAL;
1307
1308 return 0;
1309 }
1310
1311 static int
rtl8366rb_port_bridge_flags(struct dsa_switch * ds,int port,struct switchdev_brport_flags flags,struct netlink_ext_ack * extack)1312 rtl8366rb_port_bridge_flags(struct dsa_switch *ds, int port,
1313 struct switchdev_brport_flags flags,
1314 struct netlink_ext_ack *extack)
1315 {
1316 struct realtek_priv *priv = ds->priv;
1317 int ret;
1318
1319 if (flags.mask & BR_LEARNING) {
1320 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_LEARNDIS_CTRL,
1321 BIT(port),
1322 (flags.val & BR_LEARNING) ? 0 : BIT(port));
1323 if (ret)
1324 return ret;
1325 }
1326
1327 return 0;
1328 }
1329
1330 static void
rtl8366rb_port_stp_state_set(struct dsa_switch * ds,int port,u8 state)1331 rtl8366rb_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
1332 {
1333 struct realtek_priv *priv = ds->priv;
1334 u32 val;
1335 int i;
1336
1337 switch (state) {
1338 case BR_STATE_DISABLED:
1339 val = RTL8366RB_STP_STATE_DISABLED;
1340 break;
1341 case BR_STATE_BLOCKING:
1342 case BR_STATE_LISTENING:
1343 val = RTL8366RB_STP_STATE_BLOCKING;
1344 break;
1345 case BR_STATE_LEARNING:
1346 val = RTL8366RB_STP_STATE_LEARNING;
1347 break;
1348 case BR_STATE_FORWARDING:
1349 val = RTL8366RB_STP_STATE_FORWARDING;
1350 break;
1351 default:
1352 dev_err(priv->dev, "unknown bridge state requested\n");
1353 return;
1354 }
1355
1356 /* Set the same status for the port on all the FIDs */
1357 for (i = 0; i < RTL8366RB_NUM_FIDS; i++) {
1358 regmap_update_bits(priv->map, RTL8366RB_STP_STATE_BASE + i,
1359 RTL8366RB_STP_STATE_MASK(port),
1360 RTL8366RB_STP_STATE(port, val));
1361 }
1362 }
1363
1364 static void
rtl8366rb_port_fast_age(struct dsa_switch * ds,int port)1365 rtl8366rb_port_fast_age(struct dsa_switch *ds, int port)
1366 {
1367 struct realtek_priv *priv = ds->priv;
1368
1369 /* This will age out any learned L2 entries */
1370 regmap_update_bits(priv->map, RTL8366RB_SECURITY_CTRL,
1371 BIT(port), BIT(port));
1372 /* Restore the normal state of things */
1373 regmap_update_bits(priv->map, RTL8366RB_SECURITY_CTRL,
1374 BIT(port), 0);
1375 }
1376
rtl8366rb_change_mtu(struct dsa_switch * ds,int port,int new_mtu)1377 static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
1378 {
1379 struct realtek_priv *priv = ds->priv;
1380 struct rtl8366rb *rb;
1381 unsigned int max_mtu;
1382 u32 len;
1383 int i;
1384
1385 /* Cache the per-port MTU setting */
1386 rb = priv->chip_data;
1387 rb->max_mtu[port] = new_mtu;
1388
1389 /* Roof out the MTU for the entire switch to the greatest
1390 * common denominator: the biggest set for any one port will
1391 * be the biggest MTU for the switch.
1392 *
1393 * The first setting, 1522 bytes, is max IP packet 1500 bytes,
1394 * plus ethernet header, 1518 bytes, plus CPU tag, 4 bytes.
1395 * This function should consider the parameter an SDU, so the
1396 * MTU passed for this setting is 1518 bytes. The same logic
1397 * of subtracting the DSA tag of 4 bytes apply to the other
1398 * settings.
1399 */
1400 max_mtu = 1518;
1401 for (i = 0; i < RTL8366RB_NUM_PORTS; i++) {
1402 if (rb->max_mtu[i] > max_mtu)
1403 max_mtu = rb->max_mtu[i];
1404 }
1405 if (max_mtu <= 1518)
1406 len = RTL8366RB_SGCR_MAX_LENGTH_1522;
1407 else if (max_mtu > 1518 && max_mtu <= 1532)
1408 len = RTL8366RB_SGCR_MAX_LENGTH_1536;
1409 else if (max_mtu > 1532 && max_mtu <= 1548)
1410 len = RTL8366RB_SGCR_MAX_LENGTH_1552;
1411 else
1412 len = RTL8366RB_SGCR_MAX_LENGTH_16000;
1413
1414 return regmap_update_bits(priv->map, RTL8366RB_SGCR,
1415 RTL8366RB_SGCR_MAX_LENGTH_MASK,
1416 len);
1417 }
1418
rtl8366rb_max_mtu(struct dsa_switch * ds,int port)1419 static int rtl8366rb_max_mtu(struct dsa_switch *ds, int port)
1420 {
1421 /* The max MTU is 16000 bytes, so we subtract the CPU tag
1422 * and the max presented to the system is 15996 bytes.
1423 */
1424 return 15996;
1425 }
1426
rtl8366rb_get_vlan_4k(struct realtek_priv * priv,u32 vid,struct rtl8366_vlan_4k * vlan4k)1427 static int rtl8366rb_get_vlan_4k(struct realtek_priv *priv, u32 vid,
1428 struct rtl8366_vlan_4k *vlan4k)
1429 {
1430 u32 data[3];
1431 int ret;
1432 int i;
1433
1434 memset(vlan4k, '\0', sizeof(struct rtl8366_vlan_4k));
1435
1436 if (vid >= RTL8366RB_NUM_VIDS)
1437 return -EINVAL;
1438
1439 /* write VID */
1440 ret = regmap_write(priv->map, RTL8366RB_VLAN_TABLE_WRITE_BASE,
1441 vid & RTL8366RB_VLAN_VID_MASK);
1442 if (ret)
1443 return ret;
1444
1445 /* write table access control word */
1446 ret = regmap_write(priv->map, RTL8366RB_TABLE_ACCESS_CTRL_REG,
1447 RTL8366RB_TABLE_VLAN_READ_CTRL);
1448 if (ret)
1449 return ret;
1450
1451 for (i = 0; i < 3; i++) {
1452 ret = regmap_read(priv->map,
1453 RTL8366RB_VLAN_TABLE_READ_BASE + i,
1454 &data[i]);
1455 if (ret)
1456 return ret;
1457 }
1458
1459 vlan4k->vid = vid;
1460 vlan4k->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) &
1461 RTL8366RB_VLAN_UNTAG_MASK;
1462 vlan4k->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK;
1463 vlan4k->fid = data[2] & RTL8366RB_VLAN_FID_MASK;
1464
1465 return 0;
1466 }
1467
rtl8366rb_set_vlan_4k(struct realtek_priv * priv,const struct rtl8366_vlan_4k * vlan4k)1468 static int rtl8366rb_set_vlan_4k(struct realtek_priv *priv,
1469 const struct rtl8366_vlan_4k *vlan4k)
1470 {
1471 u32 data[3];
1472 int ret;
1473 int i;
1474
1475 if (vlan4k->vid >= RTL8366RB_NUM_VIDS ||
1476 vlan4k->member > RTL8366RB_VLAN_MEMBER_MASK ||
1477 vlan4k->untag > RTL8366RB_VLAN_UNTAG_MASK ||
1478 vlan4k->fid > RTL8366RB_FIDMAX)
1479 return -EINVAL;
1480
1481 data[0] = vlan4k->vid & RTL8366RB_VLAN_VID_MASK;
1482 data[1] = (vlan4k->member & RTL8366RB_VLAN_MEMBER_MASK) |
1483 ((vlan4k->untag & RTL8366RB_VLAN_UNTAG_MASK) <<
1484 RTL8366RB_VLAN_UNTAG_SHIFT);
1485 data[2] = vlan4k->fid & RTL8366RB_VLAN_FID_MASK;
1486
1487 for (i = 0; i < 3; i++) {
1488 ret = regmap_write(priv->map,
1489 RTL8366RB_VLAN_TABLE_WRITE_BASE + i,
1490 data[i]);
1491 if (ret)
1492 return ret;
1493 }
1494
1495 /* write table access control word */
1496 ret = regmap_write(priv->map, RTL8366RB_TABLE_ACCESS_CTRL_REG,
1497 RTL8366RB_TABLE_VLAN_WRITE_CTRL);
1498
1499 return ret;
1500 }
1501
rtl8366rb_get_vlan_mc(struct realtek_priv * priv,u32 index,struct rtl8366_vlan_mc * vlanmc)1502 static int rtl8366rb_get_vlan_mc(struct realtek_priv *priv, u32 index,
1503 struct rtl8366_vlan_mc *vlanmc)
1504 {
1505 u32 data[3];
1506 int ret;
1507 int i;
1508
1509 memset(vlanmc, '\0', sizeof(struct rtl8366_vlan_mc));
1510
1511 if (index >= RTL8366RB_NUM_VLANS)
1512 return -EINVAL;
1513
1514 for (i = 0; i < 3; i++) {
1515 ret = regmap_read(priv->map,
1516 RTL8366RB_VLAN_MC_BASE(index) + i,
1517 &data[i]);
1518 if (ret)
1519 return ret;
1520 }
1521
1522 vlanmc->vid = data[0] & RTL8366RB_VLAN_VID_MASK;
1523 vlanmc->priority = (data[0] >> RTL8366RB_VLAN_PRIORITY_SHIFT) &
1524 RTL8366RB_VLAN_PRIORITY_MASK;
1525 vlanmc->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) &
1526 RTL8366RB_VLAN_UNTAG_MASK;
1527 vlanmc->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK;
1528 vlanmc->fid = data[2] & RTL8366RB_VLAN_FID_MASK;
1529
1530 return 0;
1531 }
1532
rtl8366rb_set_vlan_mc(struct realtek_priv * priv,u32 index,const struct rtl8366_vlan_mc * vlanmc)1533 static int rtl8366rb_set_vlan_mc(struct realtek_priv *priv, u32 index,
1534 const struct rtl8366_vlan_mc *vlanmc)
1535 {
1536 u32 data[3];
1537 int ret;
1538 int i;
1539
1540 if (index >= RTL8366RB_NUM_VLANS ||
1541 vlanmc->vid >= RTL8366RB_NUM_VIDS ||
1542 vlanmc->priority > RTL8366RB_PRIORITYMAX ||
1543 vlanmc->member > RTL8366RB_VLAN_MEMBER_MASK ||
1544 vlanmc->untag > RTL8366RB_VLAN_UNTAG_MASK ||
1545 vlanmc->fid > RTL8366RB_FIDMAX)
1546 return -EINVAL;
1547
1548 data[0] = (vlanmc->vid & RTL8366RB_VLAN_VID_MASK) |
1549 ((vlanmc->priority & RTL8366RB_VLAN_PRIORITY_MASK) <<
1550 RTL8366RB_VLAN_PRIORITY_SHIFT);
1551 data[1] = (vlanmc->member & RTL8366RB_VLAN_MEMBER_MASK) |
1552 ((vlanmc->untag & RTL8366RB_VLAN_UNTAG_MASK) <<
1553 RTL8366RB_VLAN_UNTAG_SHIFT);
1554 data[2] = vlanmc->fid & RTL8366RB_VLAN_FID_MASK;
1555
1556 for (i = 0; i < 3; i++) {
1557 ret = regmap_write(priv->map,
1558 RTL8366RB_VLAN_MC_BASE(index) + i,
1559 data[i]);
1560 if (ret)
1561 return ret;
1562 }
1563
1564 return 0;
1565 }
1566
rtl8366rb_get_mc_index(struct realtek_priv * priv,int port,int * val)1567 static int rtl8366rb_get_mc_index(struct realtek_priv *priv, int port, int *val)
1568 {
1569 u32 data;
1570 int ret;
1571
1572 if (port >= priv->num_ports)
1573 return -EINVAL;
1574
1575 ret = regmap_read(priv->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
1576 &data);
1577 if (ret)
1578 return ret;
1579
1580 *val = (data >> RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)) &
1581 RTL8366RB_PORT_VLAN_CTRL_MASK;
1582
1583 return 0;
1584 }
1585
rtl8366rb_set_mc_index(struct realtek_priv * priv,int port,int index)1586 static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index)
1587 {
1588 struct rtl8366rb *rb;
1589 bool pvid_enabled;
1590 int ret;
1591
1592 rb = priv->chip_data;
1593 pvid_enabled = !!index;
1594
1595 if (port >= priv->num_ports || index >= RTL8366RB_NUM_VLANS)
1596 return -EINVAL;
1597
1598 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
1599 RTL8366RB_PORT_VLAN_CTRL_MASK <<
1600 RTL8366RB_PORT_VLAN_CTRL_SHIFT(port),
1601 (index & RTL8366RB_PORT_VLAN_CTRL_MASK) <<
1602 RTL8366RB_PORT_VLAN_CTRL_SHIFT(port));
1603 if (ret)
1604 return ret;
1605
1606 rb->pvid_enabled[port] = pvid_enabled;
1607
1608 /* If VLAN filtering is enabled and PVID is also enabled, we must
1609 * not drop any untagged or C-tagged frames. Make sure to update the
1610 * filtering setting.
1611 */
1612 if (dsa_port_is_vlan_filtering(dsa_to_port(priv->ds, port)))
1613 ret = rtl8366rb_drop_untagged(priv, port, !pvid_enabled);
1614
1615 return ret;
1616 }
1617
rtl8366rb_is_vlan_valid(struct realtek_priv * priv,unsigned int vlan)1618 static bool rtl8366rb_is_vlan_valid(struct realtek_priv *priv, unsigned int vlan)
1619 {
1620 unsigned int max = RTL8366RB_NUM_VLANS - 1;
1621
1622 if (priv->vlan4k_enabled)
1623 max = RTL8366RB_NUM_VIDS - 1;
1624
1625 if (vlan > max)
1626 return false;
1627
1628 return true;
1629 }
1630
rtl8366rb_enable_vlan(struct realtek_priv * priv,bool enable)1631 static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable)
1632 {
1633 dev_dbg(priv->dev, "%s VLAN\n", enable ? "enable" : "disable");
1634 return regmap_update_bits(priv->map,
1635 RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN,
1636 enable ? RTL8366RB_SGCR_EN_VLAN : 0);
1637 }
1638
rtl8366rb_enable_vlan4k(struct realtek_priv * priv,bool enable)1639 static int rtl8366rb_enable_vlan4k(struct realtek_priv *priv, bool enable)
1640 {
1641 dev_dbg(priv->dev, "%s VLAN 4k\n", enable ? "enable" : "disable");
1642 return regmap_update_bits(priv->map, RTL8366RB_SGCR,
1643 RTL8366RB_SGCR_EN_VLAN_4KTB,
1644 enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0);
1645 }
1646
rtl8366rb_phy_read(struct realtek_priv * priv,int phy,int regnum)1647 static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum)
1648 {
1649 u32 val;
1650 u32 reg;
1651 int ret;
1652
1653 if (phy > RTL8366RB_PHY_NO_MAX)
1654 return -EINVAL;
1655
1656 mutex_lock(&priv->map_lock);
1657
1658 ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG,
1659 RTL8366RB_PHY_CTRL_READ);
1660 if (ret)
1661 goto out;
1662
1663 reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum;
1664
1665 ret = regmap_write(priv->map_nolock, reg, 0);
1666 if (ret) {
1667 dev_err(priv->dev,
1668 "failed to write PHY%d reg %04x @ %04x, ret %d\n",
1669 phy, regnum, reg, ret);
1670 goto out;
1671 }
1672
1673 ret = regmap_read(priv->map_nolock, RTL8366RB_PHY_ACCESS_DATA_REG,
1674 &val);
1675 if (ret)
1676 goto out;
1677
1678 ret = val;
1679
1680 dev_dbg(priv->dev, "read PHY%d register 0x%04x @ %08x, val <- %04x\n",
1681 phy, regnum, reg, val);
1682
1683 out:
1684 mutex_unlock(&priv->map_lock);
1685
1686 return ret;
1687 }
1688
rtl8366rb_phy_write(struct realtek_priv * priv,int phy,int regnum,u16 val)1689 static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum,
1690 u16 val)
1691 {
1692 u32 reg;
1693 int ret;
1694
1695 if (phy > RTL8366RB_PHY_NO_MAX)
1696 return -EINVAL;
1697
1698 mutex_lock(&priv->map_lock);
1699
1700 ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG,
1701 RTL8366RB_PHY_CTRL_WRITE);
1702 if (ret)
1703 goto out;
1704
1705 reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum;
1706
1707 dev_dbg(priv->dev, "write PHY%d register 0x%04x @ %04x, val -> %04x\n",
1708 phy, regnum, reg, val);
1709
1710 ret = regmap_write(priv->map_nolock, reg, val);
1711 if (ret)
1712 goto out;
1713
1714 out:
1715 mutex_unlock(&priv->map_lock);
1716
1717 return ret;
1718 }
1719
rtl8366rb_dsa_phy_read(struct dsa_switch * ds,int phy,int regnum)1720 static int rtl8366rb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum)
1721 {
1722 return rtl8366rb_phy_read(ds->priv, phy, regnum);
1723 }
1724
rtl8366rb_dsa_phy_write(struct dsa_switch * ds,int phy,int regnum,u16 val)1725 static int rtl8366rb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum,
1726 u16 val)
1727 {
1728 return rtl8366rb_phy_write(ds->priv, phy, regnum, val);
1729 }
1730
rtl8366rb_reset_chip(struct realtek_priv * priv)1731 static int rtl8366rb_reset_chip(struct realtek_priv *priv)
1732 {
1733 int timeout = 10;
1734 u32 val;
1735 int ret;
1736
1737 priv->write_reg_noack(priv, RTL8366RB_RESET_CTRL_REG,
1738 RTL8366RB_CHIP_CTRL_RESET_HW);
1739 do {
1740 usleep_range(20000, 25000);
1741 ret = regmap_read(priv->map, RTL8366RB_RESET_CTRL_REG, &val);
1742 if (ret)
1743 return ret;
1744
1745 if (!(val & RTL8366RB_CHIP_CTRL_RESET_HW))
1746 break;
1747 } while (--timeout);
1748
1749 if (!timeout) {
1750 dev_err(priv->dev, "timeout waiting for the switch to reset\n");
1751 return -EIO;
1752 }
1753
1754 return 0;
1755 }
1756
rtl8366rb_detect(struct realtek_priv * priv)1757 static int rtl8366rb_detect(struct realtek_priv *priv)
1758 {
1759 struct device *dev = priv->dev;
1760 int ret;
1761 u32 val;
1762
1763 /* Detect device */
1764 ret = regmap_read(priv->map, 0x5c, &val);
1765 if (ret) {
1766 dev_err(dev, "can't get chip ID (%d)\n", ret);
1767 return ret;
1768 }
1769
1770 switch (val) {
1771 case 0x6027:
1772 dev_info(dev, "found an RTL8366S switch\n");
1773 dev_err(dev, "this switch is not yet supported, submit patches!\n");
1774 return -ENODEV;
1775 case 0x5937:
1776 dev_info(dev, "found an RTL8366RB switch\n");
1777 priv->cpu_port = RTL8366RB_PORT_NUM_CPU;
1778 priv->num_ports = RTL8366RB_NUM_PORTS;
1779 priv->num_vlan_mc = RTL8366RB_NUM_VLANS;
1780 priv->mib_counters = rtl8366rb_mib_counters;
1781 priv->num_mib_counters = ARRAY_SIZE(rtl8366rb_mib_counters);
1782 break;
1783 default:
1784 dev_info(dev, "found an Unknown Realtek switch (id=0x%04x)\n",
1785 val);
1786 break;
1787 }
1788
1789 ret = rtl8366rb_reset_chip(priv);
1790 if (ret)
1791 return ret;
1792
1793 return 0;
1794 }
1795
1796 static const struct dsa_switch_ops rtl8366rb_switch_ops_smi = {
1797 .get_tag_protocol = rtl8366_get_tag_protocol,
1798 .setup = rtl8366rb_setup,
1799 .phylink_mac_link_up = rtl8366rb_mac_link_up,
1800 .phylink_mac_link_down = rtl8366rb_mac_link_down,
1801 .get_strings = rtl8366_get_strings,
1802 .get_ethtool_stats = rtl8366_get_ethtool_stats,
1803 .get_sset_count = rtl8366_get_sset_count,
1804 .port_bridge_join = rtl8366rb_port_bridge_join,
1805 .port_bridge_leave = rtl8366rb_port_bridge_leave,
1806 .port_vlan_filtering = rtl8366rb_vlan_filtering,
1807 .port_vlan_add = rtl8366_vlan_add,
1808 .port_vlan_del = rtl8366_vlan_del,
1809 .port_enable = rtl8366rb_port_enable,
1810 .port_disable = rtl8366rb_port_disable,
1811 .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
1812 .port_bridge_flags = rtl8366rb_port_bridge_flags,
1813 .port_stp_state_set = rtl8366rb_port_stp_state_set,
1814 .port_fast_age = rtl8366rb_port_fast_age,
1815 .port_change_mtu = rtl8366rb_change_mtu,
1816 .port_max_mtu = rtl8366rb_max_mtu,
1817 };
1818
1819 static const struct dsa_switch_ops rtl8366rb_switch_ops_mdio = {
1820 .get_tag_protocol = rtl8366_get_tag_protocol,
1821 .setup = rtl8366rb_setup,
1822 .phy_read = rtl8366rb_dsa_phy_read,
1823 .phy_write = rtl8366rb_dsa_phy_write,
1824 .phylink_mac_link_up = rtl8366rb_mac_link_up,
1825 .phylink_mac_link_down = rtl8366rb_mac_link_down,
1826 .get_strings = rtl8366_get_strings,
1827 .get_ethtool_stats = rtl8366_get_ethtool_stats,
1828 .get_sset_count = rtl8366_get_sset_count,
1829 .port_bridge_join = rtl8366rb_port_bridge_join,
1830 .port_bridge_leave = rtl8366rb_port_bridge_leave,
1831 .port_vlan_filtering = rtl8366rb_vlan_filtering,
1832 .port_vlan_add = rtl8366_vlan_add,
1833 .port_vlan_del = rtl8366_vlan_del,
1834 .port_enable = rtl8366rb_port_enable,
1835 .port_disable = rtl8366rb_port_disable,
1836 .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
1837 .port_bridge_flags = rtl8366rb_port_bridge_flags,
1838 .port_stp_state_set = rtl8366rb_port_stp_state_set,
1839 .port_fast_age = rtl8366rb_port_fast_age,
1840 .port_change_mtu = rtl8366rb_change_mtu,
1841 .port_max_mtu = rtl8366rb_max_mtu,
1842 };
1843
1844 static const struct realtek_ops rtl8366rb_ops = {
1845 .detect = rtl8366rb_detect,
1846 .get_vlan_mc = rtl8366rb_get_vlan_mc,
1847 .set_vlan_mc = rtl8366rb_set_vlan_mc,
1848 .get_vlan_4k = rtl8366rb_get_vlan_4k,
1849 .set_vlan_4k = rtl8366rb_set_vlan_4k,
1850 .get_mc_index = rtl8366rb_get_mc_index,
1851 .set_mc_index = rtl8366rb_set_mc_index,
1852 .get_mib_counter = rtl8366rb_get_mib_counter,
1853 .is_vlan_valid = rtl8366rb_is_vlan_valid,
1854 .enable_vlan = rtl8366rb_enable_vlan,
1855 .enable_vlan4k = rtl8366rb_enable_vlan4k,
1856 .phy_read = rtl8366rb_phy_read,
1857 .phy_write = rtl8366rb_phy_write,
1858 };
1859
1860 const struct realtek_variant rtl8366rb_variant = {
1861 .ds_ops_smi = &rtl8366rb_switch_ops_smi,
1862 .ds_ops_mdio = &rtl8366rb_switch_ops_mdio,
1863 .ops = &rtl8366rb_ops,
1864 .clk_delay = 10,
1865 .cmd_read = 0xa9,
1866 .cmd_write = 0xa8,
1867 .chip_data_sz = sizeof(struct rtl8366rb),
1868 };
1869 EXPORT_SYMBOL_GPL(rtl8366rb_variant);
1870
1871 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
1872 MODULE_DESCRIPTION("Driver for RTL8366RB ethernet switch");
1873 MODULE_LICENSE("GPL");
1874