Home
last modified time | relevance | path

Searched refs:RO (Results 1 – 25 of 87) sorted by relevance

1234

/linux-6.1.9/Documentation/ABI/testing/
Dsysfs-devices-platform-ipmi6 (RO) The major and minor revision of the firmware.
14 (RO) Holds additional information about the firmware revision,
25 (RO) Device revision. Useful for identifying if significant
35 (RO) Indicates whether device provides device sensor data
44 (RO) Device id is specified by the manufacturer identified by
55 (RO) Lists the IPMI ‘logical device’ commands and functions
65 (RO) Displays the IPMI Command Specification Version.
73 (RO) Identifies the manufacturer responsible for the
83 (RO) Displays a number that identifies a particular system,
96 (RO) A GUID (Globally Unique ID), also referred to as a UUID
[all …]
Dsysfs-ata20 nr_pmp_links: (RO) If a SATA Port Multiplier (PM) is
23 idle_irq: (RO) Number of IRQ received by the port while
32 (RO) Host local port number. While registering host controller,
55 hw_sata_spd_limit: (RO) Maximum speed supported by the
58 sata_spd_limit: (RO) Maximum speed imposed by libata.
60 sata_spd: (RO) Current speed of the link
86 spdn_cnt: (RO) Number of times libata decided to lower the
89 gscr: (RO) Cached result of the dump of PM GSCR
103 ering: (RO) Formatted output of the error ring of the
106 id: (RO) Cached result of IDENTIFY command, as
[all …]
Dsysfs-bus-rbd71 (RO) Displays the features supported by the rbd module so that
89 size (RO) The size (in bytes) of the mapped block
92 major (RO) The block device major number.
94 client_id (RO) The ceph unique client id that was assigned
97 pool (RO) The name of the storage pool where this rbd
101 name (RO) The name of the rbd image.
107 current_snap (RO) The current snapshot for which the device
117 (RO) The unique identifier for the rbd image's pool. This is a
128 image_id (RO) The unique id for the rbd image. (For rbd
131 features (RO) A hexadecimal encoding of the feature bits
[all …]
Dsysfs-platform-dptf6 (RO) The charger type - Traditional, Hybrid or NVDC.
13 (RO) Adapter rating in milliwatts (the maximum Adapter power).
21 (RO) Maximum platform power that can be supported by the battery
29 (RO) Display the platform power source
45 (RO) The maximum sustained power for battery in milliwatts.
52 (RO) Shows the rest (outside of SoC) of worst-case platform power.
66 (RO) The maximum platform power that can be supported by the battery in milli watts.
73 (RO) The maximum sustained power for battery in milli watts.
80 (RO) The high frequency impedance value that can be obtained from battery
88 (RO) The no-load voltage that can be obtained from battery fuel gauge in
[all …]
Dsysfs-class-hwmon10 RO
18 RO
76 RO
98 RO
106 RO
114 RO
139 RO
158 RO
181 RO
189 RO
[all …]
Dsysfs-devices-platform-stratix10-rsu8 (RO) the address in flash of currently running image.
15 (RO) the address in flash of failed image.
22 (RO) the state of RSU system.
47 (RO) the version number of RSU firmware. 19.3 or late
68 (RO) the error offset inside the image that failed.
75 (RO) error code.
82 (RO) the current image's retry counter, which is used by
145 (RO) Decision firmware copy 0 version information.
152 (RO) Decision firmware copy 1 version information.
159 (RO) Decision firmware copy 2 version information.
[all …]
Dsysfs-block-loop6 (RO) Shows if the device is in autoclear mode or not ( "1" or
15 (RO) The path of the backing file that the loop device maps its
23 (RO) Start offset (in bytes).
30 (RO) The size (in bytes) that the block device maps, starting
38 (RO) Shows if automatic partition scanning is enabled for the
49 (RO) Shows if direct IO is being used to access backing file or
Dsysfs-bus-nfit10 (RO) Serial number of the NVDIMM (non-volatile dual in-line
19 (RO) The address (given by the _ADR object) of the device on its
28 (RO) Device id for the NVDIMM, assigned by the module vendor.
36 (RO) Revision of the NVDIMM, assigned by the module vendor.
44 (RO) Handle (i.e., instance number) for the SMBIOS (system
54 (RO) The flags in the NFIT memory device sub-structure indicate
73 (RO) The interface codes indicate support for persistent memory
89 (RO) Vendor id of the NVDIMM.
97 (RO) The bitmask indicates the supported device specific control
107 (RO) Displays the NVDIMM family command sets. Values
[all …]
Dsysfs-class-pktcdvd22 device_map (RO) Shows the device mapping in format:
33 dev: (RO) Device id
48 packets_started: (RO) Number of started packets.
50 packets_finished: (RO) Number of finished packets.
52 kb_written: (RO) kBytes written.
54 kb_read: (RO) kBytes read.
56 kb_read_gather: (RO) kBytes read to fill write packets.
71 size (RO) Contains the size of the bio write queue.
Dsysfs-bus-rapidio38 (RO) returns the device identifier
46 (RO) returns the device vendor identifier
54 (RO) returns the device revision level
62 (RO) returns identifier for the assembly containing the device
70 (RO) returns revision level of the assembly containing the
79 (RO) returns vendor identifier of the assembly containing the
88 (RO) returns device destination ID assigned by the enumeration
97 (RO) returns name of previous device (switch) on the path to the
106 (RO) returns the device modalias
137 (RO) reports switch routing information in "destID port" format.
[all …]
Dsysfs-block-aoe6 (RO) The ethernet address of the remote Ata over Ethernet (AoE)
14 (RO) The names of the network interfaces on the localhost (comma
23 (RO) Device status. The state attribute is "up" when the device
37 (RO) Version of the firmware in the target.
44 (RO) The amount of user data transferred (in bytes) inside each AoE
Dsysfs-bus-spi-devices-spi-nor5 Description: (RO) The JEDEC ID of the SPI NOR flash as reported by the
16 Description: (RO) Manufacturer of the SPI NOR flash.
23 Description: (RO) Part name of the SPI NOR flash.
30 Description: (RO) This attribute is only present if the SPI NOR flash
Dsysfs-devices-platform-dock6 (RO) Value 1 or 0 indicates whether the software believes the
22 (RO) Displays the docking station the laptop is docked to.
29 (RO) Show dock station flags, useful for checking if undock
38 (RO) Display the dock station type- dock_station, ata_bay or
Dsysfs-class-intel_pmt28 (RO) The telemetry data for this telemetry device. This file
36 (RO) The GUID for this telemetry device. The GUID identifies
45 (RO) The size of telemetry region in bytes that corresponds to
53 (RO) The offset of telemetry region in bytes that corresponds to
74 (RO) The crashlog buffer for this crashlog device. This file
82 (RO) The GUID for this crashlog device. The GUID identifies the
91 (RO) The length of the result buffer in bytes that corresponds
99 (RO) The offset of the buffer in bytes that corresponds
Dsysfs-timecard17 Description: (RO) The list of available time sources that the PHC
31 Description: (RO) Set of available destinations (sinks) for a SMA
54 Description: (RO) Set of available sources for a SMA output signal.
82 Description: (RO) Contains the current drift value used by the firmware
88 Description: (RO) Contains the current offset value used by the firmware
94 Description: (RO) Optional directory containing the sysfs nodes for
100 Description: (RO) Contains the measured frequency over the specified
112 Description: (RO) Optional directory containing the sysfs nodes for
118 Description: (RO) Specifies the signal duty cycle as a percentage from 1-99.
123 Description: (RO) Specifies the signal period in nanoseconds.
[all …]
Dsysfs-class-thermal10 RO, Required
18 RO, Required
47 RO, Required
55 RO, Optional
64 RO, Optional
80 RO, Optional
88 RO, Optional
208 RO, Required
214 RO, Required
241 RO, Required
[all …]
/linux-6.1.9/Documentation/hwmon/
Dq54sj108a2.rst43 curr1_alarm RO Output current alarm
44 curr1_input RO Output current
45 curr1_label RO 'iout1'
46 in1_alarm RO Input voltage alarm
47 in1_input RO Input voltage
48 in1_label RO 'vin'
49 in2_alarm RO Output voltage alarm
50 in2_input RO Output voltage
51 in2_label RO 'vout1'
52 temp1_alarm RO Temperature alarm
[all …]
Dmax20730.rst65 curr1_crit RW/RO Critical output current. Please see datasheet for
68 curr1_crit_alarm RO Output current critical alarm
69 curr1_input RO Output current
70 curr1_label RO 'iout1'
71 in1_alarm RO Input voltage alarm
72 in1_input RO Input voltage
73 in1_label RO 'vin'
74 in2_alarm RO Output voltage alarm
75 in2_input RO Output voltage
76 in2_label RO 'vout1'
[all …]
Dbt1-pvt.rst87 temp1_type RO Sensor type (always 1 as CPU embedded
89 temp1_label RO CPU Core Temperature sensor.
90 temp1_input RO Measured temperature in millidegree
94 temp1_min_alarm RO Temperature input alarm. Returns 1 if
97 temp1_max_alarm RO Temperature input alarm. Returns 1 if
106 in[0-3]_label RO CPU Voltage sensor (either core or
108 in[0-3]_input RO Measured voltage in millivolts.
111 in[0-3]_min_alarm RO Voltage input alarm. Returns 1 if
114 in[0-3]_max_alarm RO Voltage input alarm. Returns 1 if
/linux-6.1.9/Documentation/ABI/stable/
Dsysfs-class-infiniband12 node_type: (RO) Node type (CA, RNIC, usNIC, usNIC UDP,
15 node_guid: (RO) Node GUID
17 sys_image_guid: (RO) System image GUID
36 (RO) Display firmware version
53 lid: (RO) Port LID
55 rate: (RO) Port data rate (active width * active
58 lid_mask_count: (RO) Port LID mask count
60 sm_sl: (RO) Subnet manager SL for port's subnet
62 sm_lid: (RO) Subnet manager LID for port's subnet
64 state: (RO) Port state (DOWN, INIT, ARMED, ACTIVE or
[all …]
/linux-6.1.9/arch/powerpc/boot/dts/fsl/
Dp2020rdb.dts48 label = "NOR (RO) Vitesse-7385 Firmware";
55 label = "NOR (RO) DTB Image";
62 label = "NOR (RO) Linux Kernel Image";
77 label = "NOR (RO) U-Boot Image";
93 label = "NAND (RO) U-Boot Image";
100 label = "NAND (RO) DTB Image";
107 label = "NAND (RO) Linux Kernel Image";
114 label = "NAND (RO) Compressed RFS Image";
161 label = "SPI (RO) U-Boot Image";
168 label = "SPI (RO) DTB Image";
[all …]
/linux-6.1.9/Documentation/driver-api/thermal/
Dintel_dptf.rst36 ``available_uuids`` (RO)
77 ``odvp*`` (RO)
82 ``data_vault`` (RO)
134 ``power_limit_0_max_uw`` (RO)
137 ``power_limit_0_step_uw`` (RO)
140 ``power_limit_0_min_uw`` (RO)
143 ``power_limit_0_tmin_us`` (RO)
146 ``power_limit_0_tmax_us`` (RO)
149 ``power_limit_1_max_uw`` (RO)
152 ``power_limit_1_step_uw`` (RO)
[all …]
/linux-6.1.9/Documentation/misc-devices/
Dapds990x.rst52 RO - shows detected chip type and version
60 RO - measured lux value
65 RO - lux0_input max value.
75 RO - supported measurement rates
85 RO - neutral calibration value
101 RO - measured proximity value
106 RO - prox0_raw max value (1023)
125 RO - accepted values to prox0_reporting_mode (trigger, periodic)
Dbh1770glc.rst52 RO - shows detected chip type and version
63 RO - measured lux value
68 RO - lux0_input max value
74 RO - supported measurement rates
97 RO - neutral calibration value
100 RO - measured proximity value
105 RO - prox0_raw max value
127 RO - Supported proximity measurement rates in Hz
/linux-6.1.9/Documentation/admin-guide/mm/
Dcma_debugfs.rst15 - [RO] base_pfn: The base PFN (Page Frame Number) of the zone.
16 - [RO] count: Amount of memory in the CMA area.
17 - [RO] order_per_bit: Order of pages represented by one bit.
18 - [RO] bitmap: The bitmap of page states in the zone.

1234