/linux-6.1.9/drivers/pinctrl/freescale/ |
D | pinctrl-imx1.c | 18 #define PD 3 macro 105 MX1_PAD_LSCLK = PAD_ID(PD, 6), 106 MX1_PAD_REV = PAD_ID(PD, 7), 107 MX1_PAD_CLS = PAD_ID(PD, 8), 108 MX1_PAD_PS = PAD_ID(PD, 9), 109 MX1_PAD_SPL_SPR = PAD_ID(PD, 10), 110 MX1_PAD_CONTRAST = PAD_ID(PD, 11), 111 MX1_PAD_ACD_OE = PAD_ID(PD, 12), 112 MX1_PAD_LP_HSYNC = PAD_ID(PD, 13), 113 MX1_PAD_FLM_VSYNC = PAD_ID(PD, 14), [all …]
|
D | pinctrl-imx27.c | 22 #define PD 3 macro 117 MX27_PAD_SD3_CMD = PAD_ID(PD, 0), 118 MX27_PAD_SD3_CLK = PAD_ID(PD, 1), 119 MX27_PAD_ATA_DATA0 = PAD_ID(PD, 2), 120 MX27_PAD_ATA_DATA1 = PAD_ID(PD, 3), 121 MX27_PAD_ATA_DATA2 = PAD_ID(PD, 4), 122 MX27_PAD_ATA_DATA3 = PAD_ID(PD, 5), 123 MX27_PAD_ATA_DATA4 = PAD_ID(PD, 6), 124 MX27_PAD_ATA_DATA5 = PAD_ID(PD, 7), 125 MX27_PAD_ATA_DATA6 = PAD_ID(PD, 8), [all …]
|
/linux-6.1.9/drivers/usb/typec/tcpm/ |
D | Kconfig | 9 The Type-C Port Controller Manager provides a USB PD and USB Type-C 27 Type-C Port Controller Manager to provide USB PD and USB 36 to provide USB PD and USB Type-C functionalities. 44 to provide USB PD and USB Type-C functionalities. 52 MAXIM TCPCI based Type-C/PD chip driver. Works with 63 Type-C Port Controller Manager to provide USB PD and USB 74 Port Controller Manager to provide USB PD and Type-C functionalities.
|
/linux-6.1.9/arch/m68k/68000/ |
D | dragen2.c | 69 PDPOL &= ~PD(1); /* active high signal */ in init_dragen2() 70 PDIQEG &= ~PD(1); in init_dragen2() 71 PDIRQEN |= PD(1); /* IRQ enabled */ in init_dragen2()
|
/linux-6.1.9/drivers/hwmon/ |
D | as370-hwmon.c | 17 #define PD BIT(0) macro 36 val = PD; in init_pvt() 42 val &= ~PD; in init_pvt()
|
/linux-6.1.9/arch/m68k/include/asm/ |
D | MC68328.h | 513 #define PD(x) (1 << (x)) macro 514 #define PD_KB(x) PD(x) /* This is specific for Port D only */ 516 #define PD_KB0 PD(0) /* Use KB0 as PD(0) */ 517 #define PD_KB1 PD(1) /* Use KB1 as PD(1) */ 518 #define PD_KB2 PD(2) /* Use KB2 as PD(2) */ 519 #define PD_KB3 PD(3) /* Use KB3 as PD(3) */ 520 #define PD_KB4 PD(4) /* Use KB4 as PD(4) */ 521 #define PD_KB5 PD(5) /* Use KB5 as PD(5) */ 522 #define PD_KB6 PD(6) /* Use KB6 as PD(6) */ 523 #define PD_KB7 PD(7) /* Use KB7 as PD(7) */
|
/linux-6.1.9/Documentation/devicetree/bindings/usb/ |
D | richtek,rt1719.yaml | 7 title: Richtek RT1719 sink-only Type-C PD controller bindings 14 USB Type-C and PD standards. It does the USB Type-C detection including attach 16 delivery protocol to allow up to 100W of power. The BMC PD block enables full
|
D | maxim,max33359.yaml | 7 title: Maxim TCPCI Type-C PD controller DT bindings 12 description: Maxim TCPCI Type-C PD controller
|
D | richtek,rt1711h.yaml | 14 USB Type-C and PD standards. It does the USB Type-C detection including attach 16 delivery protocol to allow up to 100W of power. The BMC PD block enables full
|
D | richtek,rt1711h.txt | 1 Richtek RT1711H TypeC PD Controller.
|
D | typec-tcpci.txt | 6 - "nxp,ptn5110" for NXP USB PD TCPC PHY IC ptn5110.
|
D | st,typec-stm32g0.yaml | 7 title: STMicroelectronics STM32G0 USB Type-C PD controller
|
/linux-6.1.9/Documentation/admin-guide/media/ |
D | si476x.rst | 91 0x00 mxhi 0 - FM Mixer PD high threshold is 93 1 - FM Mixer PD high threshold is 95 0x01 mxlo ditto for FM Mixer PD low 96 0x02 lnahi ditto for FM LNA PD high 97 0x03 lnalo ditto for FM LNA PD low
|
/linux-6.1.9/drivers/gpu/drm/gma500/ |
D | mid_bios.c | 178 bpi = gct.PD.BootPanelIndex; in mid_get_vbt_data_r0() 180 dev_priv->gct_data.pt = gct.PD.PanelType; in mid_get_vbt_data_r0() 206 bpi = gct.PD.BootPanelIndex; in mid_get_vbt_data_r1() 208 dev_priv->gct_data.pt = gct.PD.PanelType; in mid_get_vbt_data_r1()
|
D | oaktrail.h | 156 } PD; member 173 } PD; member
|
/linux-6.1.9/arch/arm/boot/dts/ |
D | imx6q-logicpd.dts | 3 // Copyright (C) 2019 Logic PD, Inc. 11 model = "Logic PD i.MX6QD SOM-M3";
|
D | imx6qdl-mba6.dtsi | 445 /* 100 k PD, DSE 120 OHM, SPPEED LO */ 452 /* 100 k PD, DSE 120 OHM, SPPEED LO */ 459 /* 100 k PD, DSE 120 OHM, SPPEED LO */
|
D | dove-sbc-a510.dts | 51 * 0.3 DVI transmitter TI TFP410 PD# (active low power down) 52 * 0.4 LVDS transmitter DS90C365 PD# (active low power down)
|
/linux-6.1.9/Documentation/devicetree/bindings/hwmon/ |
D | moortec,mr75203.yaml | 21 *) Process Detector (PD) - used to assess silicon speed (e.g. mr74139). 22 *) Delay Chain - ring oscillator connected to the PD, used to measure IO 29 TS, VM & PD also include a digital interface, which consists of configuration
|
/linux-6.1.9/Documentation/devicetree/bindings/display/panel/ |
D | logicpd,type28.yaml | 7 title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
|
/linux-6.1.9/drivers/phy/freescale/ |
D | phy-fsl-imx8qm-lvds-phy.c | 33 #define PD BIT(0) macro 407 regmap_write(priv->regmap, PHY_CTRL + REG_SET, PD); in mixel_lvds_phy_runtime_suspend() 420 CTRL_INIT_MASK | PD, CTRL_INIT_VAL); in mixel_lvds_phy_runtime_resume()
|
/linux-6.1.9/arch/arm64/boot/dts/rockchip/ |
D | rk3399-nanopi-m4b.dts | 30 /* No USB type-C PD power manager */
|
/linux-6.1.9/arch/powerpc/boot/dts/fsl/ |
D | p1020rdb-pd.dts | 2 * P1020 RDB-PD Device Tree Source (32-bit address map) 37 model = "fsl,P1020RDB-PD"; 38 compatible = "fsl,P1020RDB-PD";
|
/linux-6.1.9/Documentation/devicetree/bindings/gpio/ |
D | gpio-consumer-common.yaml | 34 e.g. PD or PWDN).
|
/linux-6.1.9/Documentation/devicetree/bindings/i2c/ |
D | apple,i2c.yaml | 15 The bus is used to communicate with e.g. USB PD chips or the speaker
|