1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  Copyright (C) 2004 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
4  */
5 
6 /*
7  * LK keyboard driver for Linux, based on sunkbd.c (C) by Vojtech Pavlik
8  */
9 
10 /*
11  * DEC LK201 and LK401 keyboard driver for Linux (primary for DECstations
12  * and VAXstations, but can also be used on any standard RS232 with an
13  * adaptor).
14  *
15  * DISCLAIMER: This works for _me_. If you break anything by using the
16  * information given below, I will _not_ be liable!
17  *
18  * RJ10 pinout:		To DE9:		Or DB25:
19  *	1 - RxD <---->	Pin 3 (TxD) <->	Pin 2 (TxD)
20  *	2 - GND <---->	Pin 5 (GND) <->	Pin 7 (GND)
21  *	4 - TxD <---->	Pin 2 (RxD) <->	Pin 3 (RxD)
22  *	3 - +12V (from HDD drive connector), DON'T connect to DE9 or DB25!!!
23  *
24  * Pin numbers for DE9 and DB25 are noted on the plug (quite small:). For
25  * RJ10, it's like this:
26  *
27  *      __=__	Hold the plug in front of you, cable downwards,
28  *     /___/|	nose is hidden behind the plug. Now, pin 1 is at
29  *    |1234||	the left side, pin 4 at the right and 2 and 3 are
30  *    |IIII||	in between, of course:)
31  *    |    ||
32  *    |____|/
33  *      ||	So the adaptor consists of three connected cables
34  *      ||	for data transmission (RxD and TxD) and signal ground.
35  *		Additionally, you have to get +12V from somewhere.
36  * Most easily, you'll get that from a floppy or HDD power connector.
37  * It's the yellow cable there (black is ground and red is +5V).
38  *
39  * The keyboard and all the commands it understands are documented in
40  * "VCB02 Video Subsystem - Technical Manual", EK-104AA-TM-001. This
41  * document is LK201 specific, but LK401 is mostly compatible. It comes
42  * up in LK201 mode and doesn't report any of the additional keys it
43  * has. These need to be switched on with the LK_CMD_ENABLE_LK401
44  * command. You'll find this document (scanned .pdf file) on MANX,
45  * a search engine specific to DEC documentation. Try
46  * http://www.vt100.net/manx/details?pn=EK-104AA-TM-001;id=21;cp=1
47  */
48 
49 #include <linux/delay.h>
50 #include <linux/slab.h>
51 #include <linux/module.h>
52 #include <linux/interrupt.h>
53 #include <linux/input.h>
54 #include <linux/serio.h>
55 #include <linux/workqueue.h>
56 
57 #define DRIVER_DESC	"LK keyboard driver"
58 
59 MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
60 MODULE_DESCRIPTION(DRIVER_DESC);
61 MODULE_LICENSE("GPL");
62 
63 /*
64  * Known parameters:
65  *	bell_volume
66  *	keyclick_volume
67  *	ctrlclick_volume
68  *
69  * Please notice that there's not yet an API to set these at runtime.
70  */
71 static int bell_volume = 100; /* % */
72 module_param(bell_volume, int, 0);
73 MODULE_PARM_DESC(bell_volume, "Bell volume (in %). default is 100%");
74 
75 static int keyclick_volume = 100; /* % */
76 module_param(keyclick_volume, int, 0);
77 MODULE_PARM_DESC(keyclick_volume, "Keyclick volume (in %), default is 100%");
78 
79 static int ctrlclick_volume = 100; /* % */
80 module_param(ctrlclick_volume, int, 0);
81 MODULE_PARM_DESC(ctrlclick_volume, "Ctrlclick volume (in %), default is 100%");
82 
83 static int lk201_compose_is_alt;
84 module_param(lk201_compose_is_alt, int, 0);
85 MODULE_PARM_DESC(lk201_compose_is_alt,
86 		 "If set non-zero, LK201' Compose key will act as an Alt key");
87 
88 
89 
90 #undef LKKBD_DEBUG
91 #ifdef LKKBD_DEBUG
92 #define DBG(x...) printk(x)
93 #else
94 #define DBG(x...) do {} while (0)
95 #endif
96 
97 /* LED control */
98 #define LK_LED_WAIT		0x81
99 #define LK_LED_COMPOSE		0x82
100 #define LK_LED_SHIFTLOCK	0x84
101 #define LK_LED_SCROLLLOCK	0x88
102 #define LK_CMD_LED_ON		0x13
103 #define LK_CMD_LED_OFF		0x11
104 
105 /* Mode control */
106 #define LK_MODE_DOWN		0x80
107 #define LK_MODE_AUTODOWN	0x82
108 #define LK_MODE_UPDOWN		0x86
109 #define LK_CMD_SET_MODE(mode, div)	((mode) | ((div) << 3))
110 
111 /* Misc commands */
112 #define LK_CMD_ENABLE_KEYCLICK	0x1b
113 #define LK_CMD_DISABLE_KEYCLICK	0x99
114 #define LK_CMD_DISABLE_BELL	0xa1
115 #define LK_CMD_SOUND_BELL	0xa7
116 #define LK_CMD_ENABLE_BELL	0x23
117 #define LK_CMD_DISABLE_CTRCLICK	0xb9
118 #define LK_CMD_ENABLE_CTRCLICK	0xbb
119 #define LK_CMD_SET_DEFAULTS	0xd3
120 #define LK_CMD_POWERCYCLE_RESET	0xfd
121 #define LK_CMD_ENABLE_LK401	0xe9
122 #define LK_CMD_REQUEST_ID	0xab
123 
124 /* Misc responses from keyboard */
125 #define LK_STUCK_KEY		0x3d
126 #define LK_SELFTEST_FAILED	0x3e
127 #define LK_ALL_KEYS_UP		0xb3
128 #define LK_METRONOME		0xb4
129 #define LK_OUTPUT_ERROR		0xb5
130 #define LK_INPUT_ERROR		0xb6
131 #define LK_KBD_LOCKED		0xb7
132 #define LK_KBD_TEST_MODE_ACK	0xb8
133 #define LK_PREFIX_KEY_DOWN	0xb9
134 #define LK_MODE_CHANGE_ACK	0xba
135 #define LK_RESPONSE_RESERVED	0xbb
136 
137 #define LK_NUM_KEYCODES		256
138 #define LK_NUM_IGNORE_BYTES	6
139 
140 static unsigned short lkkbd_keycode[LK_NUM_KEYCODES] = {
141 	[0x56] = KEY_F1,
142 	[0x57] = KEY_F2,
143 	[0x58] = KEY_F3,
144 	[0x59] = KEY_F4,
145 	[0x5a] = KEY_F5,
146 	[0x64] = KEY_F6,
147 	[0x65] = KEY_F7,
148 	[0x66] = KEY_F8,
149 	[0x67] = KEY_F9,
150 	[0x68] = KEY_F10,
151 	[0x71] = KEY_F11,
152 	[0x72] = KEY_F12,
153 	[0x73] = KEY_F13,
154 	[0x74] = KEY_F14,
155 	[0x7c] = KEY_F15,
156 	[0x7d] = KEY_F16,
157 	[0x80] = KEY_F17,
158 	[0x81] = KEY_F18,
159 	[0x82] = KEY_F19,
160 	[0x83] = KEY_F20,
161 	[0x8a] = KEY_FIND,
162 	[0x8b] = KEY_INSERT,
163 	[0x8c] = KEY_DELETE,
164 	[0x8d] = KEY_SELECT,
165 	[0x8e] = KEY_PAGEUP,
166 	[0x8f] = KEY_PAGEDOWN,
167 	[0x92] = KEY_KP0,
168 	[0x94] = KEY_KPDOT,
169 	[0x95] = KEY_KPENTER,
170 	[0x96] = KEY_KP1,
171 	[0x97] = KEY_KP2,
172 	[0x98] = KEY_KP3,
173 	[0x99] = KEY_KP4,
174 	[0x9a] = KEY_KP5,
175 	[0x9b] = KEY_KP6,
176 	[0x9c] = KEY_KPCOMMA,
177 	[0x9d] = KEY_KP7,
178 	[0x9e] = KEY_KP8,
179 	[0x9f] = KEY_KP9,
180 	[0xa0] = KEY_KPMINUS,
181 	[0xa1] = KEY_PROG1,
182 	[0xa2] = KEY_PROG2,
183 	[0xa3] = KEY_PROG3,
184 	[0xa4] = KEY_PROG4,
185 	[0xa7] = KEY_LEFT,
186 	[0xa8] = KEY_RIGHT,
187 	[0xa9] = KEY_DOWN,
188 	[0xaa] = KEY_UP,
189 	[0xab] = KEY_RIGHTSHIFT,
190 	[0xac] = KEY_LEFTALT,
191 	[0xad] = KEY_COMPOSE, /* Right Compose, that is. */
192 	[0xae] = KEY_LEFTSHIFT, /* Same as KEY_RIGHTSHIFT on LK201 */
193 	[0xaf] = KEY_LEFTCTRL,
194 	[0xb0] = KEY_CAPSLOCK,
195 	[0xb1] = KEY_COMPOSE, /* Left Compose, that is. */
196 	[0xb2] = KEY_RIGHTALT,
197 	[0xbc] = KEY_BACKSPACE,
198 	[0xbd] = KEY_ENTER,
199 	[0xbe] = KEY_TAB,
200 	[0xbf] = KEY_ESC,
201 	[0xc0] = KEY_1,
202 	[0xc1] = KEY_Q,
203 	[0xc2] = KEY_A,
204 	[0xc3] = KEY_Z,
205 	[0xc5] = KEY_2,
206 	[0xc6] = KEY_W,
207 	[0xc7] = KEY_S,
208 	[0xc8] = KEY_X,
209 	[0xc9] = KEY_102ND,
210 	[0xcb] = KEY_3,
211 	[0xcc] = KEY_E,
212 	[0xcd] = KEY_D,
213 	[0xce] = KEY_C,
214 	[0xd0] = KEY_4,
215 	[0xd1] = KEY_R,
216 	[0xd2] = KEY_F,
217 	[0xd3] = KEY_V,
218 	[0xd4] = KEY_SPACE,
219 	[0xd6] = KEY_5,
220 	[0xd7] = KEY_T,
221 	[0xd8] = KEY_G,
222 	[0xd9] = KEY_B,
223 	[0xdb] = KEY_6,
224 	[0xdc] = KEY_Y,
225 	[0xdd] = KEY_H,
226 	[0xde] = KEY_N,
227 	[0xe0] = KEY_7,
228 	[0xe1] = KEY_U,
229 	[0xe2] = KEY_J,
230 	[0xe3] = KEY_M,
231 	[0xe5] = KEY_8,
232 	[0xe6] = KEY_I,
233 	[0xe7] = KEY_K,
234 	[0xe8] = KEY_COMMA,
235 	[0xea] = KEY_9,
236 	[0xeb] = KEY_O,
237 	[0xec] = KEY_L,
238 	[0xed] = KEY_DOT,
239 	[0xef] = KEY_0,
240 	[0xf0] = KEY_P,
241 	[0xf2] = KEY_SEMICOLON,
242 	[0xf3] = KEY_SLASH,
243 	[0xf5] = KEY_EQUAL,
244 	[0xf6] = KEY_RIGHTBRACE,
245 	[0xf7] = KEY_BACKSLASH,
246 	[0xf9] = KEY_MINUS,
247 	[0xfa] = KEY_LEFTBRACE,
248 	[0xfb] = KEY_APOSTROPHE,
249 };
250 
251 #define CHECK_LED(LK, VAR_ON, VAR_OFF, LED, BITS) do {		\
252 	if (test_bit(LED, (LK)->dev->led))			\
253 		VAR_ON |= BITS;					\
254 	else							\
255 		VAR_OFF |= BITS;				\
256 	} while (0)
257 
258 /*
259  * Per-keyboard data
260  */
261 struct lkkbd {
262 	unsigned short keycode[LK_NUM_KEYCODES];
263 	int ignore_bytes;
264 	unsigned char id[LK_NUM_IGNORE_BYTES];
265 	struct input_dev *dev;
266 	struct serio *serio;
267 	struct work_struct tq;
268 	char name[64];
269 	char phys[32];
270 	char type;
271 	int bell_volume;
272 	int keyclick_volume;
273 	int ctrlclick_volume;
274 };
275 
276 #ifdef LKKBD_DEBUG
277 /*
278  * Responses from the keyboard and mapping back to their names.
279  */
280 static struct {
281 	unsigned char value;
282 	unsigned char *name;
283 } lk_response[] = {
284 #define RESPONSE(x) { .value = (x), .name = #x, }
285 	RESPONSE(LK_STUCK_KEY),
286 	RESPONSE(LK_SELFTEST_FAILED),
287 	RESPONSE(LK_ALL_KEYS_UP),
288 	RESPONSE(LK_METRONOME),
289 	RESPONSE(LK_OUTPUT_ERROR),
290 	RESPONSE(LK_INPUT_ERROR),
291 	RESPONSE(LK_KBD_LOCKED),
292 	RESPONSE(LK_KBD_TEST_MODE_ACK),
293 	RESPONSE(LK_PREFIX_KEY_DOWN),
294 	RESPONSE(LK_MODE_CHANGE_ACK),
295 	RESPONSE(LK_RESPONSE_RESERVED),
296 #undef RESPONSE
297 };
298 
response_name(unsigned char value)299 static unsigned char *response_name(unsigned char value)
300 {
301 	int i;
302 
303 	for (i = 0; i < ARRAY_SIZE(lk_response); i++)
304 		if (lk_response[i].value == value)
305 			return lk_response[i].name;
306 
307 	return "<unknown>";
308 }
309 #endif /* LKKBD_DEBUG */
310 
311 /*
312  * Calculate volume parameter byte for a given volume.
313  */
volume_to_hw(int volume_percent)314 static unsigned char volume_to_hw(int volume_percent)
315 {
316 	unsigned char ret = 0;
317 
318 	if (volume_percent < 0)
319 		volume_percent = 0;
320 	if (volume_percent > 100)
321 		volume_percent = 100;
322 
323 	if (volume_percent >= 0)
324 		ret = 7;
325 	if (volume_percent >= 13)	/* 12.5 */
326 		ret = 6;
327 	if (volume_percent >= 25)
328 		ret = 5;
329 	if (volume_percent >= 38)	/* 37.5 */
330 		ret = 4;
331 	if (volume_percent >= 50)
332 		ret = 3;
333 	if (volume_percent >= 63)	/* 62.5 */
334 		ret = 2;		/* This is the default volume */
335 	if (volume_percent >= 75)
336 		ret = 1;
337 	if (volume_percent >= 88)	/* 87.5 */
338 		ret = 0;
339 
340 	ret |= 0x80;
341 
342 	return ret;
343 }
344 
lkkbd_detection_done(struct lkkbd * lk)345 static void lkkbd_detection_done(struct lkkbd *lk)
346 {
347 	int i;
348 
349 	/*
350 	 * Reset setting for Compose key. Let Compose be KEY_COMPOSE.
351 	 */
352 	lk->keycode[0xb1] = KEY_COMPOSE;
353 
354 	/*
355 	 * Print keyboard name and modify Compose=Alt on user's request.
356 	 */
357 	switch (lk->id[4]) {
358 	case 1:
359 		strscpy(lk->name, "DEC LK201 keyboard", sizeof(lk->name));
360 
361 		if (lk201_compose_is_alt)
362 			lk->keycode[0xb1] = KEY_LEFTALT;
363 		break;
364 
365 	case 2:
366 		strscpy(lk->name, "DEC LK401 keyboard", sizeof(lk->name));
367 		break;
368 
369 	default:
370 		strscpy(lk->name, "Unknown DEC keyboard", sizeof(lk->name));
371 		printk(KERN_ERR
372 			"lkkbd: keyboard on %s is unknown, please report to "
373 			"Jan-Benedict Glaw <jbglaw@lug-owl.de>\n", lk->phys);
374 		printk(KERN_ERR "lkkbd: keyboard ID'ed as:");
375 		for (i = 0; i < LK_NUM_IGNORE_BYTES; i++)
376 			printk(" 0x%02x", lk->id[i]);
377 		printk("\n");
378 		break;
379 	}
380 
381 	printk(KERN_INFO "lkkbd: keyboard on %s identified as: %s\n",
382 		lk->phys, lk->name);
383 
384 	/*
385 	 * Report errors during keyboard boot-up.
386 	 */
387 	switch (lk->id[2]) {
388 	case 0x00:
389 		/* All okay */
390 		break;
391 
392 	case LK_STUCK_KEY:
393 		printk(KERN_ERR "lkkbd: Stuck key on keyboard at %s\n",
394 			lk->phys);
395 		break;
396 
397 	case LK_SELFTEST_FAILED:
398 		printk(KERN_ERR
399 			"lkkbd: Selftest failed on keyboard at %s, "
400 			"keyboard may not work properly\n", lk->phys);
401 		break;
402 
403 	default:
404 		printk(KERN_ERR
405 			"lkkbd: Unknown error %02x on keyboard at %s\n",
406 			lk->id[2], lk->phys);
407 		break;
408 	}
409 
410 	/*
411 	 * Try to hint user if there's a stuck key.
412 	 */
413 	if (lk->id[2] == LK_STUCK_KEY && lk->id[3] != 0)
414 		printk(KERN_ERR
415 			"Scancode of stuck key is 0x%02x, keycode is 0x%04x\n",
416 			lk->id[3], lk->keycode[lk->id[3]]);
417 }
418 
419 /*
420  * lkkbd_interrupt() is called by the low level driver when a character
421  * is received.
422  */
lkkbd_interrupt(struct serio * serio,unsigned char data,unsigned int flags)423 static irqreturn_t lkkbd_interrupt(struct serio *serio,
424 				   unsigned char data, unsigned int flags)
425 {
426 	struct lkkbd *lk = serio_get_drvdata(serio);
427 	struct input_dev *input_dev = lk->dev;
428 	unsigned int keycode;
429 	int i;
430 
431 	DBG(KERN_INFO "Got byte 0x%02x\n", data);
432 
433 	if (lk->ignore_bytes > 0) {
434 		DBG(KERN_INFO "Ignoring a byte on %s\n", lk->name);
435 		lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
436 
437 		if (lk->ignore_bytes == 0)
438 			lkkbd_detection_done(lk);
439 
440 		return IRQ_HANDLED;
441 	}
442 
443 	switch (data) {
444 	case LK_ALL_KEYS_UP:
445 		for (i = 0; i < ARRAY_SIZE(lkkbd_keycode); i++)
446 			input_report_key(input_dev, lk->keycode[i], 0);
447 		input_sync(input_dev);
448 		break;
449 
450 	case 0x01:
451 		DBG(KERN_INFO "Got 0x01, scheduling re-initialization\n");
452 		lk->ignore_bytes = LK_NUM_IGNORE_BYTES;
453 		lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
454 		schedule_work(&lk->tq);
455 		break;
456 
457 	case LK_METRONOME:
458 	case LK_OUTPUT_ERROR:
459 	case LK_INPUT_ERROR:
460 	case LK_KBD_LOCKED:
461 	case LK_KBD_TEST_MODE_ACK:
462 	case LK_PREFIX_KEY_DOWN:
463 	case LK_MODE_CHANGE_ACK:
464 	case LK_RESPONSE_RESERVED:
465 		DBG(KERN_INFO "Got %s and don't know how to handle...\n",
466 			response_name(data));
467 		break;
468 
469 	default:
470 		keycode = lk->keycode[data];
471 		if (keycode != KEY_RESERVED) {
472 			input_report_key(input_dev, keycode,
473 					 !test_bit(keycode, input_dev->key));
474 			input_sync(input_dev);
475 		} else {
476 			printk(KERN_WARNING
477 				"%s: Unknown key with scancode 0x%02x on %s.\n",
478 				__FILE__, data, lk->name);
479 		}
480 	}
481 
482 	return IRQ_HANDLED;
483 }
484 
lkkbd_toggle_leds(struct lkkbd * lk)485 static void lkkbd_toggle_leds(struct lkkbd *lk)
486 {
487 	struct serio *serio = lk->serio;
488 	unsigned char leds_on = 0;
489 	unsigned char leds_off = 0;
490 
491 	CHECK_LED(lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK);
492 	CHECK_LED(lk, leds_on, leds_off, LED_COMPOSE, LK_LED_COMPOSE);
493 	CHECK_LED(lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK);
494 	CHECK_LED(lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT);
495 	if (leds_on != 0) {
496 		serio_write(serio, LK_CMD_LED_ON);
497 		serio_write(serio, leds_on);
498 	}
499 	if (leds_off != 0) {
500 		serio_write(serio, LK_CMD_LED_OFF);
501 		serio_write(serio, leds_off);
502 	}
503 }
504 
lkkbd_toggle_keyclick(struct lkkbd * lk,bool on)505 static void lkkbd_toggle_keyclick(struct lkkbd *lk, bool on)
506 {
507 	struct serio *serio = lk->serio;
508 
509 	if (on) {
510 		DBG("%s: Activating key clicks\n", __func__);
511 		serio_write(serio, LK_CMD_ENABLE_KEYCLICK);
512 		serio_write(serio, volume_to_hw(lk->keyclick_volume));
513 		serio_write(serio, LK_CMD_ENABLE_CTRCLICK);
514 		serio_write(serio, volume_to_hw(lk->ctrlclick_volume));
515 	} else {
516 		DBG("%s: Deactivating key clicks\n", __func__);
517 		serio_write(serio, LK_CMD_DISABLE_KEYCLICK);
518 		serio_write(serio, LK_CMD_DISABLE_CTRCLICK);
519 	}
520 
521 }
522 
523 /*
524  * lkkbd_event() handles events from the input module.
525  */
lkkbd_event(struct input_dev * dev,unsigned int type,unsigned int code,int value)526 static int lkkbd_event(struct input_dev *dev,
527 			unsigned int type, unsigned int code, int value)
528 {
529 	struct lkkbd *lk = input_get_drvdata(dev);
530 
531 	switch (type) {
532 	case EV_LED:
533 		lkkbd_toggle_leds(lk);
534 		return 0;
535 
536 	case EV_SND:
537 		switch (code) {
538 		case SND_CLICK:
539 			lkkbd_toggle_keyclick(lk, value);
540 			return 0;
541 
542 		case SND_BELL:
543 			if (value != 0)
544 				serio_write(lk->serio, LK_CMD_SOUND_BELL);
545 
546 			return 0;
547 		}
548 
549 		break;
550 
551 	default:
552 		printk(KERN_ERR "%s(): Got unknown type %d, code %d, value %d\n",
553 			__func__, type, code, value);
554 	}
555 
556 	return -1;
557 }
558 
559 /*
560  * lkkbd_reinit() sets leds and beeps to a state the computer remembers they
561  * were in.
562  */
lkkbd_reinit(struct work_struct * work)563 static void lkkbd_reinit(struct work_struct *work)
564 {
565 	struct lkkbd *lk = container_of(work, struct lkkbd, tq);
566 	int division;
567 
568 	/* Ask for ID */
569 	serio_write(lk->serio, LK_CMD_REQUEST_ID);
570 
571 	/* Reset parameters */
572 	serio_write(lk->serio, LK_CMD_SET_DEFAULTS);
573 
574 	/* Set LEDs */
575 	lkkbd_toggle_leds(lk);
576 
577 	/*
578 	 * Try to activate extended LK401 mode. This command will
579 	 * only work with a LK401 keyboard and grants access to
580 	 * LAlt, RAlt, RCompose and RShift.
581 	 */
582 	serio_write(lk->serio, LK_CMD_ENABLE_LK401);
583 
584 	/* Set all keys to UPDOWN mode */
585 	for (division = 1; division <= 14; division++)
586 		serio_write(lk->serio,
587 			    LK_CMD_SET_MODE(LK_MODE_UPDOWN, division));
588 
589 	/* Enable bell and set volume */
590 	serio_write(lk->serio, LK_CMD_ENABLE_BELL);
591 	serio_write(lk->serio, volume_to_hw(lk->bell_volume));
592 
593 	/* Enable/disable keyclick (and possibly set volume) */
594 	lkkbd_toggle_keyclick(lk, test_bit(SND_CLICK, lk->dev->snd));
595 
596 	/* Sound the bell if needed */
597 	if (test_bit(SND_BELL, lk->dev->snd))
598 		serio_write(lk->serio, LK_CMD_SOUND_BELL);
599 }
600 
601 /*
602  * lkkbd_connect() probes for a LK keyboard and fills the necessary structures.
603  */
lkkbd_connect(struct serio * serio,struct serio_driver * drv)604 static int lkkbd_connect(struct serio *serio, struct serio_driver *drv)
605 {
606 	struct lkkbd *lk;
607 	struct input_dev *input_dev;
608 	int i;
609 	int err;
610 
611 	lk = kzalloc(sizeof(struct lkkbd), GFP_KERNEL);
612 	input_dev = input_allocate_device();
613 	if (!lk || !input_dev) {
614 		err = -ENOMEM;
615 		goto fail1;
616 	}
617 
618 	lk->serio = serio;
619 	lk->dev = input_dev;
620 	INIT_WORK(&lk->tq, lkkbd_reinit);
621 	lk->bell_volume = bell_volume;
622 	lk->keyclick_volume = keyclick_volume;
623 	lk->ctrlclick_volume = ctrlclick_volume;
624 	memcpy(lk->keycode, lkkbd_keycode, sizeof(lk->keycode));
625 
626 	strscpy(lk->name, "DEC LK keyboard", sizeof(lk->name));
627 	snprintf(lk->phys, sizeof(lk->phys), "%s/input0", serio->phys);
628 
629 	input_dev->name = lk->name;
630 	input_dev->phys = lk->phys;
631 	input_dev->id.bustype = BUS_RS232;
632 	input_dev->id.vendor = SERIO_LKKBD;
633 	input_dev->id.product = 0;
634 	input_dev->id.version = 0x0100;
635 	input_dev->dev.parent = &serio->dev;
636 	input_dev->event = lkkbd_event;
637 
638 	input_set_drvdata(input_dev, lk);
639 
640 	__set_bit(EV_KEY, input_dev->evbit);
641 	__set_bit(EV_LED, input_dev->evbit);
642 	__set_bit(EV_SND, input_dev->evbit);
643 	__set_bit(EV_REP, input_dev->evbit);
644 	__set_bit(LED_CAPSL, input_dev->ledbit);
645 	__set_bit(LED_SLEEP, input_dev->ledbit);
646 	__set_bit(LED_COMPOSE, input_dev->ledbit);
647 	__set_bit(LED_SCROLLL, input_dev->ledbit);
648 	__set_bit(SND_BELL, input_dev->sndbit);
649 	__set_bit(SND_CLICK, input_dev->sndbit);
650 
651 	input_dev->keycode = lk->keycode;
652 	input_dev->keycodesize = sizeof(lk->keycode[0]);
653 	input_dev->keycodemax = ARRAY_SIZE(lk->keycode);
654 
655 	for (i = 0; i < LK_NUM_KEYCODES; i++)
656 		__set_bit(lk->keycode[i], input_dev->keybit);
657 	__clear_bit(KEY_RESERVED, input_dev->keybit);
658 
659 	serio_set_drvdata(serio, lk);
660 
661 	err = serio_open(serio, drv);
662 	if (err)
663 		goto fail2;
664 
665 	err = input_register_device(lk->dev);
666 	if (err)
667 		goto fail3;
668 
669 	serio_write(lk->serio, LK_CMD_POWERCYCLE_RESET);
670 
671 	return 0;
672 
673  fail3:	serio_close(serio);
674  fail2:	serio_set_drvdata(serio, NULL);
675  fail1:	input_free_device(input_dev);
676 	kfree(lk);
677 	return err;
678 }
679 
680 /*
681  * lkkbd_disconnect() unregisters and closes behind us.
682  */
lkkbd_disconnect(struct serio * serio)683 static void lkkbd_disconnect(struct serio *serio)
684 {
685 	struct lkkbd *lk = serio_get_drvdata(serio);
686 
687 	input_get_device(lk->dev);
688 	input_unregister_device(lk->dev);
689 	serio_close(serio);
690 	serio_set_drvdata(serio, NULL);
691 	input_put_device(lk->dev);
692 	kfree(lk);
693 }
694 
695 static const struct serio_device_id lkkbd_serio_ids[] = {
696 	{
697 		.type	= SERIO_RS232,
698 		.proto	= SERIO_LKKBD,
699 		.id	= SERIO_ANY,
700 		.extra	= SERIO_ANY,
701 	},
702 	{ 0 }
703 };
704 
705 MODULE_DEVICE_TABLE(serio, lkkbd_serio_ids);
706 
707 static struct serio_driver lkkbd_drv = {
708 	.driver		= {
709 		.name	= "lkkbd",
710 	},
711 	.description	= DRIVER_DESC,
712 	.id_table	= lkkbd_serio_ids,
713 	.connect	= lkkbd_connect,
714 	.disconnect	= lkkbd_disconnect,
715 	.interrupt	= lkkbd_interrupt,
716 };
717 
718 module_serio_driver(lkkbd_drv);
719