/linux-6.1.9/include/linux/mfd/da9055/ |
D | pdata.h | 14 GPIO_1, enumerator
|
/linux-6.1.9/arch/arm64/boot/dts/qcom/ |
D | msm8996-xiaomi-natrium.dts | 198 "NC", /* GPIO_1 */ 236 "NC", /* GPIO_1 */ 251 "ESE_SPI_MISO", /* GPIO_1 */
|
D | msm8996-xiaomi-gemini.dts | 238 "NC", /* GPIO_1 */ 283 "NC", /* GPIO_1 */ 298 "ESE_SPI_MISO", /* GPIO_1 */
|
D | msm8996-xiaomi-scorpio.dts | 259 "NC", /* GPIO_1 */ 306 "NC", /* GPIO_1 */ 321 "ESE_SPI_MISO", /* GPIO_1 */
|
D | apq8016-sbc.dts | 599 "[UART0_RX]", /* GPIO_1, LSEC pin 7 */
|
D | apq8096-db820c.dts | 275 "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
|
/linux-6.1.9/drivers/media/pci/cx23885/ |
D | cx23885-f300.c | 21 #define F300_RESET GPIO_1
|
D | cx23885-cards.c | 1718 cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1); in cx23885_gpio_setup() 1719 cx23885_gpio_clear(dev, GPIO_1 | GPIO_2); in cx23885_gpio_setup() 1721 cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2); in cx23885_gpio_setup() 1727 cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1); in cx23885_gpio_setup() 1728 cx23885_gpio_clear(dev, GPIO_0 | GPIO_1); in cx23885_gpio_setup() 1730 cx23885_gpio_set(dev, GPIO_0 | GPIO_1); in cx23885_gpio_setup()
|
D | cx23885.h | 107 #define GPIO_1 0x00000002 macro
|
D | cx23885-dvb.c | 614 cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1); in dvbsky_t9580_set_voltage() 618 cx23885_gpio_set(dev, GPIO_1); in dvbsky_t9580_set_voltage() 622 cx23885_gpio_set(dev, GPIO_1); in dvbsky_t9580_set_voltage() 626 cx23885_gpio_clear(dev, GPIO_1); in dvbsky_t9580_set_voltage()
|
/linux-6.1.9/arch/mips/boot/dts/mscc/ |
D | serval.dtsi | 105 pins = "GPIO_0", "GPIO_2", "GPIO_3", "GPIO_1";
|
/linux-6.1.9/Documentation/devicetree/bindings/mfd/ |
D | mscc,ocelot.yaml | 119 pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
|
/linux-6.1.9/arch/arm64/boot/dts/marvell/ |
D | armada-7040-db.dts | 137 * IO0_5: GPIO_1 IO1_5: LDO_5V_Enable
|
/linux-6.1.9/include/linux/mfd/ |
D | idt8a340_reg.h | 284 #define GPIO_1 0xc8d4 macro
|
/linux-6.1.9/arch/arm64/boot/dts/freescale/ |
D | imx8mn-bsh-smm-s2-common.dtsi | 421 MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x0d6 /* GPIO_1 - WIFI_GPIO_1 */
|
/linux-6.1.9/arch/arm64/boot/dts/actions/ |
D | s900-bubblegum-96.dts | 95 "GPIO-B", /* GPIO_1, LSEC pin 24 */
|
/linux-6.1.9/Documentation/devicetree/bindings/pinctrl/ |
D | mediatek,mt7622-pinctrl.yaml | 286 PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
|
D | mediatek,mt7986-pinctrl.yaml | 267 GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
|
/linux-6.1.9/arch/arm64/boot/dts/microchip/ |
D | sparx5.dtsi | 238 pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
|
/linux-6.1.9/drivers/staging/qlge/ |
D | qlge.h | 831 GPIO_1 = 0x68, /* Use semaphore */ enumerator
|