| /linux-6.1.9/drivers/clocksource/ |
| D | timer-cs5535.c | 19 #define DRV_NAME "cs5535-clockevt" macro
96 .name = DRV_NAME,
143 printk(KERN_ERR DRV_NAME ": Could not allocate MFGPT timer\n"); in cs5535_mfgpt_init()
150 printk(KERN_ERR DRV_NAME ": Could not set up IRQ %d\n", in cs5535_mfgpt_init()
156 ret = request_irq(timer_irq, mfgpt_tick, flags, DRV_NAME, timer); in cs5535_mfgpt_init()
158 printk(KERN_ERR DRV_NAME ": Unable to set up the interrupt.\n"); in cs5535_mfgpt_init()
168 printk(KERN_INFO DRV_NAME in cs5535_mfgpt_init()
180 printk(KERN_ERR DRV_NAME ": Unable to set up the MFGPT clock source\n"); in cs5535_mfgpt_init()
|
| /linux-6.1.9/drivers/net/can/sja1000/ |
| D | sja1000_isa.c | 19 #define DRV_NAME "sja1000_isa" macro
129 if (!request_mem_region(mem[idx], iosize, DRV_NAME)) { in sja1000_isa_probe()
142 if (!request_region(port[idx], iosize, DRV_NAME)) { in sja1000_isa_probe()
204 DRV_NAME, err); in sja1000_isa_probe()
209 DRV_NAME, priv->reg_base, dev->irq); in sja1000_isa_probe()
252 .name = DRV_NAME,
263 platform_device_alloc(DRV_NAME, idx); in sja1000_isa_init()
275 DRV_NAME, idx, port[idx], mem[idx], irq[idx]); in sja1000_isa_init()
278 DRV_NAME); in sja1000_isa_init()
289 DRV_NAME, MAXDEV); in sja1000_isa_init()
|
| /linux-6.1.9/drivers/char/hw_random/ |
| D | amd-rng.c | 33 #define DRV_NAME "AMD768-HWRNG" macro
160 if (!request_region(pmbase + PMBASE_OFFSET, PMBASE_SIZE, DRV_NAME)) { in amd_rng_mod_init()
161 dev_err(&pdev->dev, DRV_NAME " region 0x%x already in use!\n", in amd_rng_mod_init()
169 pr_err(DRV_NAME "Cannot map ioport\n"); in amd_rng_mod_init()
178 pr_info(DRV_NAME " detected\n"); in amd_rng_mod_init()
181 pr_err(DRV_NAME " registering failed (%d)\n", err); in amd_rng_mod_init()
|
| /linux-6.1.9/drivers/net/ethernet/microchip/ |
| D | encx24j600.c | 23 #define DRV_NAME "encx24j600" macro
67 pr_debug(DRV_NAME ": %s - packet len:%d\n", msg, len); in dump_packet()
552 pr_info(DRV_NAME ": %s\n", msg); in encx24j600_dump_config()
555 pr_info(DRV_NAME " ECON1: %04X\n", encx24j600_read_reg(priv, ECON1)); in encx24j600_dump_config()
556 pr_info(DRV_NAME " ECON2: %04X\n", encx24j600_read_reg(priv, ECON2)); in encx24j600_dump_config()
557 pr_info(DRV_NAME " ERXFCON: %04X\n", encx24j600_read_reg(priv, in encx24j600_dump_config()
559 pr_info(DRV_NAME " ESTAT: %04X\n", encx24j600_read_reg(priv, ESTAT)); in encx24j600_dump_config()
560 pr_info(DRV_NAME " EIR: %04X\n", encx24j600_read_reg(priv, EIR)); in encx24j600_dump_config()
561 pr_info(DRV_NAME " EIDLED: %04X\n", encx24j600_read_reg(priv, EIDLED)); in encx24j600_dump_config()
564 pr_info(DRV_NAME " MACON1: %04X\n", encx24j600_read_reg(priv, MACON1)); in encx24j600_dump_config()
[all …]
|
| /linux-6.1.9/drivers/ata/ |
| D | pata_rb532_cf.c | 33 #define DRV_NAME "pata-rb532-cf" macro
77 ATA_PIO_SHT(DRV_NAME),
128 gpiod_set_consumer_name(gpiod, DRV_NAME); in rb532_pata_driver_probe()
171 .name = DRV_NAME,
184 MODULE_ALIAS("platform:" DRV_NAME);
|
| D | pata_palmld.c | 29 #define DRV_NAME "pata_palmld" macro
38 ATA_PIO_SHT(DRV_NAME),
126 .name = DRV_NAME,
137 MODULE_ALIAS("platform:" DRV_NAME);
|
| D | pata_cypress.c | 20 #define DRV_NAME "pata_cypress" macro
65 ata_dev_err(adev, DRV_NAME ": mome computation failed.\n"); in cy82c693_set_piomode()
119 ATA_BMDMA_SHT(DRV_NAME),
157 .name = DRV_NAME,
|
| D | pata_netcell.c | 18 #define DRV_NAME "pata_netcell" macro
35 ATA_BMDMA_SHT(DRV_NAME),
93 .name = DRV_NAME,
|
| D | pata_falcon.c | 33 #define DRV_NAME "pata_falcon" macro
37 ATA_PIO_SHT(DRV_NAME),
133 resource_size(base_res), DRV_NAME)) { in pata_falcon_init_one()
140 resource_size(ctl_res), DRV_NAME)) { in pata_falcon_init_one()
149 resource_size(base_mem_res), DRV_NAME)) { in pata_falcon_init_one()
|
| D | pata_cs5530.c | 23 #define DRV_NAME "pata_cs5530" macro
150 ATA_BASE_SHT(DRV_NAME),
209 printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n"); in cs5530_init_chip()
213 printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n"); in cs5530_init_chip()
342 .name = DRV_NAME,
|
| D | pata_ninja32.c | 46 #define DRV_NAME "pata_ninja32" macro
81 ATA_BMDMA_SHT(DRV_NAME),
119 rc = pcim_iomap_regions(dev, 1 << 0, DRV_NAME); in ninja32_init_one()
179 .name = DRV_NAME,
|
| D | pata_of_platform.c | 16 #define DRV_NAME "pata_of_platform" macro
19 ATA_PIO_SHT(DRV_NAME),
88 .name = DRV_NAME,
|
| /linux-6.1.9/drivers/gpio/ |
| D | gpio-sch311x.c | 20 #define DRV_NAME "gpio-sch311x" macro
99 if (!request_muxed_region(sio_config_port, 2, DRV_NAME)) { in sch311x_sio_enter()
100 pr_err(DRV_NAME "I/O address 0x%04x already in use\n", in sch311x_sio_enter()
140 1, DRV_NAME)) { in sch311x_gpio_request()
274 DRV_NAME)) { in sch311x_gpio_probe()
291 block->chip.label = DRV_NAME; in sch311x_gpio_probe()
341 .driver.name = DRV_NAME,
409 sch311x_gpio_pdev = platform_device_alloc(DRV_NAME, -1); in sch311x_gpio_pdev_add()
416 pr_err(DRV_NAME "Platform data allocation failed\n"); in sch311x_gpio_pdev_add()
422 pr_err(DRV_NAME "Device addition failed\n"); in sch311x_gpio_pdev_add()
|
| /linux-6.1.9/drivers/net/ |
| D | rionet.c | 25 #define DRV_NAME "rionet" macro
163 printk(KERN_INFO "%s: queued skb len %8.8x\n", DRV_NAME, in rionet_queue_tx_msg()
237 DRV_NAME, sid, tid, info); in rionet_dbell_event()
262 DRV_NAME); in rionet_dbell_event()
274 DRV_NAME, mbox, slot); in rionet_inb_msg_event()
292 DRV_NAME, mbox, slot); in rionet_outb_msg_event()
318 printk(KERN_INFO "%s: open\n", DRV_NAME); in rionet_open()
375 printk(KERN_INFO "%s: close %s\n", DRV_NAME, ndev->name); in rionet_close()
446 strscpy(info->driver, DRV_NAME, sizeof(info->driver)); in rionet_get_drvinfo()
536 DRV_NAME, in rionet_setup_netdev()
[all …]
|
| /linux-6.1.9/sound/soc/codecs/ |
| D | spdif_transmitter.c | 22 #define DRV_NAME "spdif-dit" macro
77 .name = DRV_NAME,
87 MODULE_ALIAS("platform:" DRV_NAME);
|
| /linux-6.1.9/drivers/input/misc/ |
| D | rb532_button.c | 16 #define DRV_NAME "rb532-button" macro
86 .name = DRV_NAME,
94 MODULE_ALIAS("platform:" DRV_NAME);
|
| D | pcf8574_keypad.c | 15 #define DRV_NAME "pcf8574_keypad" macro
121 sprintf(lp->name, DRV_NAME); in pcf8574_kp_probe()
135 DRV_NAME, lp); in pcf8574_kp_probe()
200 { DRV_NAME, 0 },
207 .name = DRV_NAME,
|
| /linux-6.1.9/drivers/mfd/ |
| D | cs5535-mfd.c | 19 #define DRV_NAME "cs5535-mfd" macro
85 err = pci_request_region(pdev, PMS_BAR, DRV_NAME); in cs5535_mfd_probe()
100 err = pci_request_region(pdev, ACPI_BAR, DRV_NAME); in cs5535_mfd_probe()
154 .name = DRV_NAME,
|
| /linux-6.1.9/arch/sh/drivers/ |
| D | push-switch.c | 14 #define DRV_NAME "push-switch" macro
64 psw_info->name ? psw_info->name : DRV_NAME, pdev); in switch_drv_probe()
117 .name = DRV_NAME,
123 printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION); in switch_init()
|
| /linux-6.1.9/drivers/scsi/ |
| D | stex.c | 36 #define DRV_NAME "stex" macro
807 printk(KERN_WARNING DRV_NAME "(%s): invalid status head\n", in stex_mu_intr()
831 printk(KERN_WARNING DRV_NAME in stex_mu_intr()
841 printk(KERN_WARNING DRV_NAME in stex_mu_intr()
849 printk(KERN_WARNING DRV_NAME "(%s): bad status size\n", in stex_mu_intr()
936 printk(KERN_WARNING DRV_NAME in stex_ss_mu_intr()
946 printk(KERN_WARNING DRV_NAME in stex_ss_mu_intr()
961 printk(KERN_WARNING DRV_NAME in stex_ss_mu_intr()
1036 printk(KERN_ERR DRV_NAME in stex_common_handshake()
1086 printk(KERN_ERR DRV_NAME in stex_common_handshake()
[all …]
|
| /linux-6.1.9/drivers/xen/ |
| D | platform-pci.c | 27 #define DRV_NAME "xen-platform-pci" macro
120 ret = pci_request_region(pdev, 1, DRV_NAME); in platform_pci_probe()
124 ret = pci_request_region(pdev, 0, DRV_NAME); in platform_pci_probe()
186 .name = DRV_NAME,
|
| /linux-6.1.9/drivers/power/supply/ |
| D | wilco-charger.c | 17 #define DRV_NAME "wilco-charger" macro
165 .name = DRV_NAME,
184 .name = DRV_NAME,
189 MODULE_ALIAS("platform:" DRV_NAME);
|
| /linux-6.1.9/drivers/platform/x86/ |
| D | winmate-fm07-keys.c | 15 #define DRV_NAME "winmate-fm07keys" macro
94 input->phys = DRV_NAME "/input0"; in fm07keys_probe()
132 .name = DRV_NAME
164 dev = platform_device_register_simple(DRV_NAME, PLATFORM_DEVID_NONE, NULL, 0); in fm07keys_init()
|
| /linux-6.1.9/drivers/net/ethernet/arc/ |
| D | emac_arc.c | 17 #define DRV_NAME "emac_arc" macro
37 priv->drv_name = DRV_NAME; in emac_arc_probe()
81 .name = DRV_NAME,
|
| /linux-6.1.9/drivers/staging/rtl8192u/ieee80211/ |
| D | ieee80211_module.c | 44 #define DRV_NAME "ieee80211" macro
264 ieee80211_proc = proc_mkdir(DRV_NAME, init_net.proc_net); in ieee80211_debug_init()
266 IEEE80211_ERROR("Unable to create " DRV_NAME in ieee80211_debug_init()
272 remove_proc_entry(DRV_NAME, init_net.proc_net); in ieee80211_debug_init()
283 remove_proc_entry(DRV_NAME, init_net.proc_net); in ieee80211_debug_exit()
|