1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * This is a combined i2c adapter and algorithm driver for the
4 * MPC107/Tsi107 PowerPC northbridge and processors that include
5 * the same I2C unit (8240, 8245, 85xx).
6 *
7 * Copyright (C) 2003-2004 Humboldt Solutions Ltd, adrian@humboldt.co.uk
8 * Copyright (C) 2021 Allied Telesis Labs
9 */
10
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/sched/signal.h>
14 #include <linux/of_address.h>
15 #include <linux/of_irq.h>
16 #include <linux/of_platform.h>
17 #include <linux/property.h>
18 #include <linux/slab.h>
19
20 #include <linux/clk.h>
21 #include <linux/io.h>
22 #include <linux/iopoll.h>
23 #include <linux/fsl_devices.h>
24 #include <linux/i2c.h>
25 #include <linux/interrupt.h>
26 #include <linux/delay.h>
27
28 #include <asm/mpc52xx.h>
29 #include <asm/mpc85xx.h>
30 #include <sysdev/fsl_soc.h>
31
32 #define DRV_NAME "mpc-i2c"
33
34 #define MPC_I2C_CLOCK_LEGACY 0
35 #define MPC_I2C_CLOCK_PRESERVE (~0U)
36
37 #define MPC_I2C_FDR 0x04
38 #define MPC_I2C_CR 0x08
39 #define MPC_I2C_SR 0x0c
40 #define MPC_I2C_DR 0x10
41 #define MPC_I2C_DFSRR 0x14
42
43 #define CCR_MEN 0x80
44 #define CCR_MIEN 0x40
45 #define CCR_MSTA 0x20
46 #define CCR_MTX 0x10
47 #define CCR_TXAK 0x08
48 #define CCR_RSTA 0x04
49 #define CCR_RSVD 0x02
50
51 #define CSR_MCF 0x80
52 #define CSR_MAAS 0x40
53 #define CSR_MBB 0x20
54 #define CSR_MAL 0x10
55 #define CSR_SRW 0x04
56 #define CSR_MIF 0x02
57 #define CSR_RXAK 0x01
58
59 enum mpc_i2c_action {
60 MPC_I2C_ACTION_START = 1,
61 MPC_I2C_ACTION_RESTART,
62 MPC_I2C_ACTION_READ_BEGIN,
63 MPC_I2C_ACTION_READ_BYTE,
64 MPC_I2C_ACTION_WRITE,
65 MPC_I2C_ACTION_STOP,
66
67 __MPC_I2C_ACTION_CNT
68 };
69
70 static const char * const action_str[] = {
71 "invalid",
72 "start",
73 "restart",
74 "read begin",
75 "read",
76 "write",
77 "stop",
78 };
79
80 static_assert(ARRAY_SIZE(action_str) == __MPC_I2C_ACTION_CNT);
81
82 struct mpc_i2c {
83 struct device *dev;
84 void __iomem *base;
85 u32 interrupt;
86 wait_queue_head_t waitq;
87 spinlock_t lock;
88 struct i2c_adapter adap;
89 int irq;
90 u32 real_clk;
91 u8 fdr, dfsrr;
92 struct clk *clk_per;
93 u32 cntl_bits;
94 enum mpc_i2c_action action;
95 struct i2c_msg *msgs;
96 int num_msgs;
97 int curr_msg;
98 u32 byte_posn;
99 u32 block;
100 int rc;
101 int expect_rxack;
102 bool has_errata_A004447;
103 };
104
105 struct mpc_i2c_divider {
106 u16 divider;
107 u16 fdr; /* including dfsrr */
108 };
109
110 struct mpc_i2c_data {
111 void (*setup)(struct device_node *node, struct mpc_i2c *i2c, u32 clock);
112 };
113
writeccr(struct mpc_i2c * i2c,u32 x)114 static inline void writeccr(struct mpc_i2c *i2c, u32 x)
115 {
116 writeb(x, i2c->base + MPC_I2C_CR);
117 }
118
119 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release
120 * the bus, because it wants to send ACK.
121 * Following sequence of enabling/disabling and sending start/stop generates
122 * the 9 pulses, each with a START then ending with STOP, so it's all OK.
123 */
mpc_i2c_fixup(struct mpc_i2c * i2c)124 static void mpc_i2c_fixup(struct mpc_i2c *i2c)
125 {
126 int k;
127 unsigned long flags;
128
129 for (k = 9; k; k--) {
130 writeccr(i2c, 0);
131 writeb(0, i2c->base + MPC_I2C_SR); /* clear any status bits */
132 writeccr(i2c, CCR_MEN | CCR_MSTA); /* START */
133 readb(i2c->base + MPC_I2C_DR); /* init xfer */
134 udelay(15); /* let it hit the bus */
135 local_irq_save(flags); /* should not be delayed further */
136 writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSTA); /* delay SDA */
137 readb(i2c->base + MPC_I2C_DR);
138 if (k != 1)
139 udelay(5);
140 local_irq_restore(flags);
141 }
142 writeccr(i2c, CCR_MEN); /* Initiate STOP */
143 readb(i2c->base + MPC_I2C_DR);
144 udelay(15); /* Let STOP propagate */
145 writeccr(i2c, 0);
146 }
147
i2c_mpc_wait_sr(struct mpc_i2c * i2c,int mask)148 static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask)
149 {
150 void __iomem *addr = i2c->base + MPC_I2C_SR;
151 u8 val;
152
153 return readb_poll_timeout(addr, val, val & mask, 0, 100);
154 }
155
156 /*
157 * Workaround for Erratum A004447. From the P2040CE Rev Q
158 *
159 * 1. Set up the frequency divider and sampling rate.
160 * 2. I2CCR - a0h
161 * 3. Poll for I2CSR[MBB] to get set.
162 * 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to
163 * step 5. If MAL is not set, then go to step 13.
164 * 5. I2CCR - 00h
165 * 6. I2CCR - 22h
166 * 7. I2CCR - a2h
167 * 8. Poll for I2CSR[MBB] to get set.
168 * 9. Issue read to I2CDR.
169 * 10. Poll for I2CSR[MIF] to be set.
170 * 11. I2CCR - 82h
171 * 12. Workaround complete. Skip the next steps.
172 * 13. Issue read to I2CDR.
173 * 14. Poll for I2CSR[MIF] to be set.
174 * 15. I2CCR - 80h
175 */
mpc_i2c_fixup_A004447(struct mpc_i2c * i2c)176 static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c)
177 {
178 int ret;
179 u32 val;
180
181 writeccr(i2c, CCR_MEN | CCR_MSTA);
182 ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
183 if (ret) {
184 dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
185 return;
186 }
187
188 val = readb(i2c->base + MPC_I2C_SR);
189
190 if (val & CSR_MAL) {
191 writeccr(i2c, 0x00);
192 writeccr(i2c, CCR_MSTA | CCR_RSVD);
193 writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD);
194 ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
195 if (ret) {
196 dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
197 return;
198 }
199 val = readb(i2c->base + MPC_I2C_DR);
200 ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
201 if (ret) {
202 dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
203 return;
204 }
205 writeccr(i2c, CCR_MEN | CCR_RSVD);
206 } else {
207 val = readb(i2c->base + MPC_I2C_DR);
208 ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
209 if (ret) {
210 dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
211 return;
212 }
213 writeccr(i2c, CCR_MEN);
214 }
215 }
216
217 #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
218 static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
219 {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
220 {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
221 {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
222 {52, 0x63}, {56, 0x29}, {60, 0x41}, {64, 0x2a},
223 {68, 0x07}, {72, 0x2b}, {80, 0x2c}, {88, 0x09},
224 {96, 0x2d}, {104, 0x0a}, {112, 0x2e}, {120, 0x81},
225 {128, 0x2f}, {136, 0x47}, {144, 0x0c}, {160, 0x30},
226 {176, 0x49}, {192, 0x31}, {208, 0x4a}, {224, 0x32},
227 {240, 0x0f}, {256, 0x33}, {272, 0x87}, {288, 0x10},
228 {320, 0x34}, {352, 0x89}, {384, 0x35}, {416, 0x8a},
229 {448, 0x36}, {480, 0x13}, {512, 0x37}, {576, 0x14},
230 {640, 0x38}, {768, 0x39}, {896, 0x3a}, {960, 0x17},
231 {1024, 0x3b}, {1152, 0x18}, {1280, 0x3c}, {1536, 0x3d},
232 {1792, 0x3e}, {1920, 0x1b}, {2048, 0x3f}, {2304, 0x1c},
233 {2560, 0x1d}, {3072, 0x1e}, {3584, 0x7e}, {3840, 0x1f},
234 {4096, 0x7f}, {4608, 0x5c}, {5120, 0x5d}, {6144, 0x5e},
235 {7168, 0xbe}, {7680, 0x5f}, {8192, 0xbf}, {9216, 0x9c},
236 {10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f}
237 };
238
mpc_i2c_get_fdr_52xx(struct device_node * node,u32 clock,u32 * real_clk)239 static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
240 u32 *real_clk)
241 {
242 struct fwnode_handle *fwnode = of_fwnode_handle(node);
243 const struct mpc_i2c_divider *div = NULL;
244 unsigned int pvr = mfspr(SPRN_PVR);
245 u32 divider;
246 int i;
247
248 if (clock == MPC_I2C_CLOCK_LEGACY) {
249 /* see below - default fdr = 0x3f -> div = 2048 */
250 *real_clk = mpc5xxx_fwnode_get_bus_frequency(fwnode) / 2048;
251 return -EINVAL;
252 }
253
254 /* Determine divider value */
255 divider = mpc5xxx_fwnode_get_bus_frequency(fwnode) / clock;
256
257 /*
258 * We want to choose an FDR/DFSR that generates an I2C bus speed that
259 * is equal to or lower than the requested speed.
260 */
261 for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) {
262 div = &mpc_i2c_dividers_52xx[i];
263 /* Old MPC5200 rev A CPUs do not support the high bits */
264 if (div->fdr & 0xc0 && pvr == 0x80822011)
265 continue;
266 if (div->divider >= divider)
267 break;
268 }
269
270 *real_clk = mpc5xxx_fwnode_get_bus_frequency(fwnode) / div->divider;
271 return (int)div->fdr;
272 }
273
mpc_i2c_setup_52xx(struct device_node * node,struct mpc_i2c * i2c,u32 clock)274 static void mpc_i2c_setup_52xx(struct device_node *node,
275 struct mpc_i2c *i2c,
276 u32 clock)
277 {
278 int ret, fdr;
279
280 if (clock == MPC_I2C_CLOCK_PRESERVE) {
281 dev_dbg(i2c->dev, "using fdr %d\n",
282 readb(i2c->base + MPC_I2C_FDR));
283 return;
284 }
285
286 ret = mpc_i2c_get_fdr_52xx(node, clock, &i2c->real_clk);
287 fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
288
289 writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
290
291 if (ret >= 0)
292 dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk,
293 fdr);
294 }
295 #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
mpc_i2c_setup_52xx(struct device_node * node,struct mpc_i2c * i2c,u32 clock)296 static void mpc_i2c_setup_52xx(struct device_node *node,
297 struct mpc_i2c *i2c,
298 u32 clock)
299 {
300 }
301 #endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
302
303 #ifdef CONFIG_PPC_MPC512x
mpc_i2c_setup_512x(struct device_node * node,struct mpc_i2c * i2c,u32 clock)304 static void mpc_i2c_setup_512x(struct device_node *node,
305 struct mpc_i2c *i2c,
306 u32 clock)
307 {
308 struct device_node *node_ctrl;
309 void __iomem *ctrl;
310 const u32 *pval;
311 u32 idx;
312
313 /* Enable I2C interrupts for mpc5121 */
314 node_ctrl = of_find_compatible_node(NULL, NULL,
315 "fsl,mpc5121-i2c-ctrl");
316 if (node_ctrl) {
317 ctrl = of_iomap(node_ctrl, 0);
318 if (ctrl) {
319 /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
320 pval = of_get_property(node, "reg", NULL);
321 idx = (*pval & 0xff) / 0x20;
322 setbits32(ctrl, 1 << (24 + idx * 2));
323 iounmap(ctrl);
324 }
325 of_node_put(node_ctrl);
326 }
327
328 /* The clock setup for the 52xx works also fine for the 512x */
329 mpc_i2c_setup_52xx(node, i2c, clock);
330 }
331 #else /* CONFIG_PPC_MPC512x */
mpc_i2c_setup_512x(struct device_node * node,struct mpc_i2c * i2c,u32 clock)332 static void mpc_i2c_setup_512x(struct device_node *node,
333 struct mpc_i2c *i2c,
334 u32 clock)
335 {
336 }
337 #endif /* CONFIG_PPC_MPC512x */
338
339 #ifdef CONFIG_FSL_SOC
340 static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
341 {160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123},
342 {288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102},
343 {416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127},
344 {544, 0x0b03}, {576, 0x0104}, {608, 0x1603}, {640, 0x0105},
345 {672, 0x2003}, {704, 0x0b05}, {736, 0x2b03}, {768, 0x0106},
346 {800, 0x3603}, {832, 0x0b06}, {896, 0x012a}, {960, 0x0107},
347 {1024, 0x012b}, {1088, 0x1607}, {1152, 0x0108}, {1216, 0x2b07},
348 {1280, 0x0109}, {1408, 0x1609}, {1536, 0x010a}, {1664, 0x160a},
349 {1792, 0x012e}, {1920, 0x010b}, {2048, 0x012f}, {2176, 0x2b0b},
350 {2304, 0x010c}, {2560, 0x010d}, {2816, 0x2b0d}, {3072, 0x010e},
351 {3328, 0x2b0e}, {3584, 0x0132}, {3840, 0x010f}, {4096, 0x0133},
352 {4608, 0x0110}, {5120, 0x0111}, {6144, 0x0112}, {7168, 0x0136},
353 {7680, 0x0113}, {8192, 0x0137}, {9216, 0x0114}, {10240, 0x0115},
354 {12288, 0x0116}, {14336, 0x013a}, {15360, 0x0117}, {16384, 0x013b},
355 {18432, 0x0118}, {20480, 0x0119}, {24576, 0x011a}, {28672, 0x013e},
356 {30720, 0x011b}, {32768, 0x013f}, {36864, 0x011c}, {40960, 0x011d},
357 {49152, 0x011e}, {61440, 0x011f}
358 };
359
mpc_i2c_get_sec_cfg_8xxx(void)360 static u32 mpc_i2c_get_sec_cfg_8xxx(void)
361 {
362 struct device_node *node;
363 u32 __iomem *reg;
364 u32 val = 0;
365
366 node = of_find_node_by_name(NULL, "global-utilities");
367 if (node) {
368 const u32 *prop = of_get_property(node, "reg", NULL);
369 if (prop) {
370 /*
371 * Map and check POR Device Status Register 2
372 * (PORDEVSR2) at 0xE0014. Note than while MPC8533
373 * and MPC8544 indicate SEC frequency ratio
374 * configuration as bit 26 in PORDEVSR2, other MPC8xxx
375 * parts may store it differently or may not have it
376 * at all.
377 */
378 reg = ioremap(get_immrbase() + *prop + 0x14, 0x4);
379 if (!reg)
380 printk(KERN_ERR
381 "Error: couldn't map PORDEVSR2\n");
382 else
383 val = in_be32(reg) & 0x00000020; /* sec-cfg */
384 iounmap(reg);
385 }
386 }
387 of_node_put(node);
388
389 return val;
390 }
391
mpc_i2c_get_prescaler_8xxx(void)392 static u32 mpc_i2c_get_prescaler_8xxx(void)
393 {
394 /*
395 * According to the AN2919 all MPC824x have prescaler 1, while MPC83xx
396 * may have prescaler 1, 2, or 3, depending on the power-on
397 * configuration.
398 */
399 u32 prescaler = 1;
400
401 /* mpc85xx */
402 if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2)
403 || pvr_version_is(PVR_VER_E500MC)
404 || pvr_version_is(PVR_VER_E5500)
405 || pvr_version_is(PVR_VER_E6500)) {
406 unsigned int svr = mfspr(SPRN_SVR);
407
408 if ((SVR_SOC_VER(svr) == SVR_8540)
409 || (SVR_SOC_VER(svr) == SVR_8541)
410 || (SVR_SOC_VER(svr) == SVR_8560)
411 || (SVR_SOC_VER(svr) == SVR_8555)
412 || (SVR_SOC_VER(svr) == SVR_8610))
413 /* the above 85xx SoCs have prescaler 1 */
414 prescaler = 1;
415 else if ((SVR_SOC_VER(svr) == SVR_8533)
416 || (SVR_SOC_VER(svr) == SVR_8544))
417 /* the above 85xx SoCs have prescaler 3 or 2 */
418 prescaler = mpc_i2c_get_sec_cfg_8xxx() ? 3 : 2;
419 else
420 /* all the other 85xx have prescaler 2 */
421 prescaler = 2;
422 }
423
424 return prescaler;
425 }
426
mpc_i2c_get_fdr_8xxx(struct device_node * node,u32 clock,u32 * real_clk)427 static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
428 u32 *real_clk)
429 {
430 const struct mpc_i2c_divider *div = NULL;
431 u32 prescaler = mpc_i2c_get_prescaler_8xxx();
432 u32 divider;
433 int i;
434
435 if (clock == MPC_I2C_CLOCK_LEGACY) {
436 /* see below - default fdr = 0x1031 -> div = 16 * 3072 */
437 *real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072);
438 return -EINVAL;
439 }
440
441 divider = fsl_get_sys_freq() / clock / prescaler;
442
443 pr_debug("I2C: src_clock=%d clock=%d divider=%d\n",
444 fsl_get_sys_freq(), clock, divider);
445
446 /*
447 * We want to choose an FDR/DFSR that generates an I2C bus speed that
448 * is equal to or lower than the requested speed.
449 */
450 for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_8xxx); i++) {
451 div = &mpc_i2c_dividers_8xxx[i];
452 if (div->divider >= divider)
453 break;
454 }
455
456 *real_clk = fsl_get_sys_freq() / prescaler / div->divider;
457 return (int)div->fdr;
458 }
459
mpc_i2c_setup_8xxx(struct device_node * node,struct mpc_i2c * i2c,u32 clock)460 static void mpc_i2c_setup_8xxx(struct device_node *node,
461 struct mpc_i2c *i2c,
462 u32 clock)
463 {
464 int ret, fdr;
465
466 if (clock == MPC_I2C_CLOCK_PRESERVE) {
467 dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n",
468 readb(i2c->base + MPC_I2C_DFSRR),
469 readb(i2c->base + MPC_I2C_FDR));
470 return;
471 }
472
473 ret = mpc_i2c_get_fdr_8xxx(node, clock, &i2c->real_clk);
474 fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
475
476 writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
477 writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
478
479 if (ret >= 0)
480 dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
481 i2c->real_clk, fdr >> 8, fdr & 0xff);
482 }
483
484 #else /* !CONFIG_FSL_SOC */
mpc_i2c_setup_8xxx(struct device_node * node,struct mpc_i2c * i2c,u32 clock)485 static void mpc_i2c_setup_8xxx(struct device_node *node,
486 struct mpc_i2c *i2c,
487 u32 clock)
488 {
489 }
490 #endif /* CONFIG_FSL_SOC */
491
mpc_i2c_finish(struct mpc_i2c * i2c,int rc)492 static void mpc_i2c_finish(struct mpc_i2c *i2c, int rc)
493 {
494 i2c->rc = rc;
495 i2c->block = 0;
496 i2c->cntl_bits = CCR_MEN;
497 writeccr(i2c, i2c->cntl_bits);
498 wake_up(&i2c->waitq);
499 }
500
mpc_i2c_do_action(struct mpc_i2c * i2c)501 static void mpc_i2c_do_action(struct mpc_i2c *i2c)
502 {
503 struct i2c_msg *msg = NULL;
504 int dir = 0;
505 int recv_len = 0;
506 u8 byte;
507
508 dev_dbg(i2c->dev, "action = %s\n", action_str[i2c->action]);
509
510 i2c->cntl_bits &= ~(CCR_RSTA | CCR_MTX | CCR_TXAK);
511
512 if (i2c->action != MPC_I2C_ACTION_STOP) {
513 msg = &i2c->msgs[i2c->curr_msg];
514 if (msg->flags & I2C_M_RD)
515 dir = 1;
516 if (msg->flags & I2C_M_RECV_LEN)
517 recv_len = 1;
518 }
519
520 switch (i2c->action) {
521 case MPC_I2C_ACTION_RESTART:
522 i2c->cntl_bits |= CCR_RSTA;
523 fallthrough;
524
525 case MPC_I2C_ACTION_START:
526 i2c->cntl_bits |= CCR_MSTA | CCR_MTX;
527 writeccr(i2c, i2c->cntl_bits);
528 writeb((msg->addr << 1) | dir, i2c->base + MPC_I2C_DR);
529 i2c->expect_rxack = 1;
530 i2c->action = dir ? MPC_I2C_ACTION_READ_BEGIN : MPC_I2C_ACTION_WRITE;
531 break;
532
533 case MPC_I2C_ACTION_READ_BEGIN:
534 if (msg->len) {
535 if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
536 i2c->cntl_bits |= CCR_TXAK;
537
538 writeccr(i2c, i2c->cntl_bits);
539 /* Dummy read */
540 readb(i2c->base + MPC_I2C_DR);
541 }
542 i2c->action = MPC_I2C_ACTION_READ_BYTE;
543 break;
544
545 case MPC_I2C_ACTION_READ_BYTE:
546 if (i2c->byte_posn || !recv_len) {
547 /* Generate Tx ACK on next to last byte */
548 if (i2c->byte_posn == msg->len - 2)
549 i2c->cntl_bits |= CCR_TXAK;
550 /* Do not generate stop on last byte */
551 if (i2c->byte_posn == msg->len - 1)
552 i2c->cntl_bits |= CCR_MTX;
553
554 writeccr(i2c, i2c->cntl_bits);
555 }
556
557 byte = readb(i2c->base + MPC_I2C_DR);
558
559 if (i2c->byte_posn == 0 && recv_len) {
560 if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX) {
561 mpc_i2c_finish(i2c, -EPROTO);
562 return;
563 }
564 msg->len += byte;
565 /*
566 * For block reads, generate Tx ACK here if data length
567 * is 1 byte (total length is 2 bytes).
568 */
569 if (msg->len == 2) {
570 i2c->cntl_bits |= CCR_TXAK;
571 writeccr(i2c, i2c->cntl_bits);
572 }
573 }
574
575 dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action], byte);
576 msg->buf[i2c->byte_posn++] = byte;
577 break;
578
579 case MPC_I2C_ACTION_WRITE:
580 dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action],
581 msg->buf[i2c->byte_posn]);
582 writeb(msg->buf[i2c->byte_posn++], i2c->base + MPC_I2C_DR);
583 i2c->expect_rxack = 1;
584 break;
585
586 case MPC_I2C_ACTION_STOP:
587 mpc_i2c_finish(i2c, 0);
588 break;
589
590 default:
591 WARN(1, "Unexpected action %d\n", i2c->action);
592 break;
593 }
594
595 if (msg && msg->len == i2c->byte_posn) {
596 i2c->curr_msg++;
597 i2c->byte_posn = 0;
598
599 if (i2c->curr_msg == i2c->num_msgs) {
600 i2c->action = MPC_I2C_ACTION_STOP;
601 /*
602 * We don't get another interrupt on read so
603 * finish the transfer now
604 */
605 if (dir)
606 mpc_i2c_finish(i2c, 0);
607 } else {
608 i2c->action = MPC_I2C_ACTION_RESTART;
609 }
610 }
611 }
612
mpc_i2c_do_intr(struct mpc_i2c * i2c,u8 status)613 static void mpc_i2c_do_intr(struct mpc_i2c *i2c, u8 status)
614 {
615 spin_lock(&i2c->lock);
616
617 if (!(status & CSR_MCF)) {
618 dev_dbg(i2c->dev, "unfinished\n");
619 mpc_i2c_finish(i2c, -EIO);
620 goto out;
621 }
622
623 if (status & CSR_MAL) {
624 dev_dbg(i2c->dev, "arbitration lost\n");
625 mpc_i2c_finish(i2c, -EAGAIN);
626 goto out;
627 }
628
629 if (i2c->expect_rxack && (status & CSR_RXAK)) {
630 dev_dbg(i2c->dev, "no Rx ACK\n");
631 mpc_i2c_finish(i2c, -ENXIO);
632 goto out;
633 }
634 i2c->expect_rxack = 0;
635
636 mpc_i2c_do_action(i2c);
637
638 out:
639 spin_unlock(&i2c->lock);
640 }
641
mpc_i2c_isr(int irq,void * dev_id)642 static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
643 {
644 struct mpc_i2c *i2c = dev_id;
645 u8 status;
646
647 status = readb(i2c->base + MPC_I2C_SR);
648 if (status & CSR_MIF) {
649 /* Wait up to 100us for transfer to properly complete */
650 readb_poll_timeout_atomic(i2c->base + MPC_I2C_SR, status, status & CSR_MCF, 0, 100);
651 writeb(0, i2c->base + MPC_I2C_SR);
652 mpc_i2c_do_intr(i2c, status);
653 return IRQ_HANDLED;
654 }
655 return IRQ_NONE;
656 }
657
mpc_i2c_wait_for_completion(struct mpc_i2c * i2c)658 static int mpc_i2c_wait_for_completion(struct mpc_i2c *i2c)
659 {
660 long time_left;
661
662 time_left = wait_event_timeout(i2c->waitq, !i2c->block, i2c->adap.timeout);
663 if (!time_left)
664 return -ETIMEDOUT;
665 if (time_left < 0)
666 return time_left;
667
668 return 0;
669 }
670
mpc_i2c_execute_msg(struct mpc_i2c * i2c)671 static int mpc_i2c_execute_msg(struct mpc_i2c *i2c)
672 {
673 unsigned long orig_jiffies;
674 unsigned long flags;
675 int ret;
676
677 spin_lock_irqsave(&i2c->lock, flags);
678
679 i2c->curr_msg = 0;
680 i2c->rc = 0;
681 i2c->byte_posn = 0;
682 i2c->block = 1;
683 i2c->action = MPC_I2C_ACTION_START;
684
685 i2c->cntl_bits = CCR_MEN | CCR_MIEN;
686 writeb(0, i2c->base + MPC_I2C_SR);
687 writeccr(i2c, i2c->cntl_bits);
688
689 mpc_i2c_do_action(i2c);
690
691 spin_unlock_irqrestore(&i2c->lock, flags);
692
693 ret = mpc_i2c_wait_for_completion(i2c);
694 if (ret)
695 i2c->rc = ret;
696
697 if (i2c->rc == -EIO || i2c->rc == -EAGAIN || i2c->rc == -ETIMEDOUT)
698 i2c_recover_bus(&i2c->adap);
699
700 orig_jiffies = jiffies;
701 /* Wait until STOP is seen, allow up to 1 s */
702 while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
703 if (time_after(jiffies, orig_jiffies + HZ)) {
704 u8 status = readb(i2c->base + MPC_I2C_SR);
705
706 dev_dbg(i2c->dev, "timeout\n");
707 if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
708 writeb(status & ~CSR_MAL,
709 i2c->base + MPC_I2C_SR);
710 i2c_recover_bus(&i2c->adap);
711 }
712 return -EIO;
713 }
714 cond_resched();
715 }
716
717 return i2c->rc;
718 }
719
mpc_xfer(struct i2c_adapter * adap,struct i2c_msg * msgs,int num)720 static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
721 {
722 int rc, ret = num;
723 struct mpc_i2c *i2c = i2c_get_adapdata(adap);
724 int i;
725
726 dev_dbg(i2c->dev, "num = %d\n", num);
727 for (i = 0; i < num; i++)
728 dev_dbg(i2c->dev, " addr = %02x, flags = %02x, len = %d, %*ph\n",
729 msgs[i].addr, msgs[i].flags, msgs[i].len,
730 msgs[i].flags & I2C_M_RD ? 0 : msgs[i].len,
731 msgs[i].buf);
732
733 WARN_ON(i2c->msgs != NULL);
734 i2c->msgs = msgs;
735 i2c->num_msgs = num;
736
737 rc = mpc_i2c_execute_msg(i2c);
738 if (rc < 0)
739 ret = rc;
740
741 i2c->num_msgs = 0;
742 i2c->msgs = NULL;
743
744 return ret;
745 }
746
mpc_functionality(struct i2c_adapter * adap)747 static u32 mpc_functionality(struct i2c_adapter *adap)
748 {
749 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
750 | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
751 }
752
fsl_i2c_bus_recovery(struct i2c_adapter * adap)753 static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
754 {
755 struct mpc_i2c *i2c = i2c_get_adapdata(adap);
756
757 if (i2c->has_errata_A004447)
758 mpc_i2c_fixup_A004447(i2c);
759 else
760 mpc_i2c_fixup(i2c);
761
762 return 0;
763 }
764
765 static const struct i2c_algorithm mpc_algo = {
766 .master_xfer = mpc_xfer,
767 .functionality = mpc_functionality,
768 };
769
770 static struct i2c_adapter mpc_ops = {
771 .owner = THIS_MODULE,
772 .algo = &mpc_algo,
773 .timeout = HZ,
774 };
775
776 static struct i2c_bus_recovery_info fsl_i2c_recovery_info = {
777 .recover_bus = fsl_i2c_bus_recovery,
778 };
779
fsl_i2c_probe(struct platform_device * op)780 static int fsl_i2c_probe(struct platform_device *op)
781 {
782 const struct mpc_i2c_data *data;
783 struct mpc_i2c *i2c;
784 const u32 *prop;
785 u32 clock = MPC_I2C_CLOCK_LEGACY;
786 int result = 0;
787 int plen;
788 struct clk *clk;
789 int err;
790
791 i2c = devm_kzalloc(&op->dev, sizeof(*i2c), GFP_KERNEL);
792 if (!i2c)
793 return -ENOMEM;
794
795 i2c->dev = &op->dev; /* for debug and error output */
796
797 init_waitqueue_head(&i2c->waitq);
798 spin_lock_init(&i2c->lock);
799
800 i2c->base = devm_platform_ioremap_resource(op, 0);
801 if (IS_ERR(i2c->base))
802 return PTR_ERR(i2c->base);
803
804 i2c->irq = platform_get_irq(op, 0);
805 if (i2c->irq < 0)
806 return i2c->irq;
807
808 result = devm_request_irq(&op->dev, i2c->irq, mpc_i2c_isr,
809 IRQF_SHARED, "i2c-mpc", i2c);
810 if (result < 0) {
811 dev_err(i2c->dev, "failed to attach interrupt\n");
812 return result;
813 }
814
815 /*
816 * enable clock for the I2C peripheral (non fatal),
817 * keep a reference upon successful allocation
818 */
819 clk = devm_clk_get_optional(&op->dev, NULL);
820 if (IS_ERR(clk))
821 return PTR_ERR(clk);
822
823 err = clk_prepare_enable(clk);
824 if (err) {
825 dev_err(&op->dev, "failed to enable clock\n");
826 return err;
827 }
828
829 i2c->clk_per = clk;
830
831 if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) {
832 clock = MPC_I2C_CLOCK_PRESERVE;
833 } else {
834 prop = of_get_property(op->dev.of_node, "clock-frequency",
835 &plen);
836 if (prop && plen == sizeof(u32))
837 clock = *prop;
838 }
839
840 data = device_get_match_data(&op->dev);
841 if (data) {
842 data->setup(op->dev.of_node, i2c, clock);
843 } else {
844 /* Backwards compatibility */
845 if (of_get_property(op->dev.of_node, "dfsrr", NULL))
846 mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
847 }
848
849 prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
850 if (prop && plen == sizeof(u32)) {
851 mpc_ops.timeout = *prop * HZ / 1000000;
852 if (mpc_ops.timeout < 5)
853 mpc_ops.timeout = 5;
854 }
855 dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
856
857 if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447"))
858 i2c->has_errata_A004447 = true;
859
860 i2c->adap = mpc_ops;
861 scnprintf(i2c->adap.name, sizeof(i2c->adap.name),
862 "MPC adapter (%s)", of_node_full_name(op->dev.of_node));
863 i2c->adap.dev.parent = &op->dev;
864 i2c->adap.nr = op->id;
865 i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
866 i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info;
867 platform_set_drvdata(op, i2c);
868 i2c_set_adapdata(&i2c->adap, i2c);
869
870 result = i2c_add_numbered_adapter(&i2c->adap);
871 if (result)
872 goto fail_add;
873
874 return 0;
875
876 fail_add:
877 clk_disable_unprepare(i2c->clk_per);
878
879 return result;
880 };
881
fsl_i2c_remove(struct platform_device * op)882 static int fsl_i2c_remove(struct platform_device *op)
883 {
884 struct mpc_i2c *i2c = platform_get_drvdata(op);
885
886 i2c_del_adapter(&i2c->adap);
887
888 clk_disable_unprepare(i2c->clk_per);
889
890 return 0;
891 };
892
mpc_i2c_suspend(struct device * dev)893 static int __maybe_unused mpc_i2c_suspend(struct device *dev)
894 {
895 struct mpc_i2c *i2c = dev_get_drvdata(dev);
896
897 i2c->fdr = readb(i2c->base + MPC_I2C_FDR);
898 i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR);
899
900 return 0;
901 }
902
mpc_i2c_resume(struct device * dev)903 static int __maybe_unused mpc_i2c_resume(struct device *dev)
904 {
905 struct mpc_i2c *i2c = dev_get_drvdata(dev);
906
907 writeb(i2c->fdr, i2c->base + MPC_I2C_FDR);
908 writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR);
909
910 return 0;
911 }
912 static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
913
914 static const struct mpc_i2c_data mpc_i2c_data_512x = {
915 .setup = mpc_i2c_setup_512x,
916 };
917
918 static const struct mpc_i2c_data mpc_i2c_data_52xx = {
919 .setup = mpc_i2c_setup_52xx,
920 };
921
922 static const struct mpc_i2c_data mpc_i2c_data_8313 = {
923 .setup = mpc_i2c_setup_8xxx,
924 };
925
926 static const struct mpc_i2c_data mpc_i2c_data_8543 = {
927 .setup = mpc_i2c_setup_8xxx,
928 };
929
930 static const struct mpc_i2c_data mpc_i2c_data_8544 = {
931 .setup = mpc_i2c_setup_8xxx,
932 };
933
934 static const struct of_device_id mpc_i2c_of_match[] = {
935 {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
936 {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, },
937 {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
938 {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, },
939 {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, },
940 {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, },
941 {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, },
942 /* Backward compatibility */
943 {.compatible = "fsl-i2c", },
944 {},
945 };
946 MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
947
948 /* Structure for a device driver */
949 static struct platform_driver mpc_i2c_driver = {
950 .probe = fsl_i2c_probe,
951 .remove = fsl_i2c_remove,
952 .driver = {
953 .name = DRV_NAME,
954 .of_match_table = mpc_i2c_of_match,
955 .pm = &mpc_i2c_pm_ops,
956 },
957 };
958
959 module_platform_driver(mpc_i2c_driver);
960
961 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
962 MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
963 "MPC824x/83xx/85xx/86xx/512x/52xx processors");
964 MODULE_LICENSE("GPL");
965