1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Copyright (C) 2013 Imagination Technologies
4  * Author: Paul Burton <paul.burton@mips.com>
5  */
6 
7 #ifndef __MIPS_ASM_MIPS_CPS_H__
8 # error Please include asm/mips-cps.h rather than asm/mips-cm.h
9 #endif
10 
11 #ifndef __MIPS_ASM_MIPS_CM_H__
12 #define __MIPS_ASM_MIPS_CM_H__
13 
14 #include <linux/bitfield.h>
15 #include <linux/bitops.h>
16 #include <linux/errno.h>
17 
18 /* The base address of the CM GCR block */
19 extern void __iomem *mips_gcr_base;
20 
21 /* The base address of the CM L2-only sync region */
22 extern void __iomem *mips_cm_l2sync_base;
23 
24 /**
25  * __mips_cm_phys_base - retrieve the physical base address of the CM
26  *
27  * This function returns the physical base address of the Coherence Manager
28  * global control block, or 0 if no Coherence Manager is present. It provides
29  * a default implementation which reads the CMGCRBase register where available,
30  * and may be overridden by platforms which determine this address in a
31  * different way by defining a function with the same prototype except for the
32  * name mips_cm_phys_base (without underscores).
33  */
34 extern phys_addr_t __mips_cm_phys_base(void);
35 
36 /*
37  * mips_cm_is64 - determine CM register width
38  *
39  * The CM register width is determined by the version of the CM, with CM3
40  * introducing 64 bit GCRs and all prior CM versions having 32 bit GCRs.
41  * However we may run a kernel built for MIPS32 on a system with 64 bit GCRs,
42  * or vice-versa. This variable indicates the width of the memory accesses
43  * that the kernel will perform to GCRs, which may differ from the actual
44  * width of the GCRs.
45  *
46  * It's set to 0 for 32-bit accesses and 1 for 64-bit accesses.
47  */
48 extern int mips_cm_is64;
49 
50 /**
51  * mips_cm_error_report - Report CM cache errors
52  */
53 #ifdef CONFIG_MIPS_CM
54 extern void mips_cm_error_report(void);
55 #else
mips_cm_error_report(void)56 static inline void mips_cm_error_report(void) {}
57 #endif
58 
59 /**
60  * mips_cm_probe - probe for a Coherence Manager
61  *
62  * Attempt to detect the presence of a Coherence Manager. Returns 0 if a CM
63  * is successfully detected, else -errno.
64  */
65 #ifdef CONFIG_MIPS_CM
66 extern int mips_cm_probe(void);
67 #else
mips_cm_probe(void)68 static inline int mips_cm_probe(void)
69 {
70 	return -ENODEV;
71 }
72 #endif
73 
74 /**
75  * mips_cm_present - determine whether a Coherence Manager is present
76  *
77  * Returns true if a CM is present in the system, else false.
78  */
mips_cm_present(void)79 static inline bool mips_cm_present(void)
80 {
81 #ifdef CONFIG_MIPS_CM
82 	return mips_gcr_base != NULL;
83 #else
84 	return false;
85 #endif
86 }
87 
88 /**
89  * mips_cm_has_l2sync - determine whether an L2-only sync region is present
90  *
91  * Returns true if the system implements an L2-only sync region, else false.
92  */
mips_cm_has_l2sync(void)93 static inline bool mips_cm_has_l2sync(void)
94 {
95 #ifdef CONFIG_MIPS_CM
96 	return mips_cm_l2sync_base != NULL;
97 #else
98 	return false;
99 #endif
100 }
101 
102 /* Offsets to register blocks from the CM base address */
103 #define MIPS_CM_GCB_OFS		0x0000 /* Global Control Block */
104 #define MIPS_CM_CLCB_OFS	0x2000 /* Core Local Control Block */
105 #define MIPS_CM_COCB_OFS	0x4000 /* Core Other Control Block */
106 #define MIPS_CM_GDB_OFS		0x6000 /* Global Debug Block */
107 
108 /* Total size of the CM memory mapped registers */
109 #define MIPS_CM_GCR_SIZE	0x8000
110 
111 /* Size of the L2-only sync region */
112 #define MIPS_CM_L2SYNC_SIZE	0x1000
113 
114 #define GCR_ACCESSOR_RO(sz, off, name)					\
115 	CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_GCB_OFS + off, name)		\
116 	CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_COCB_OFS + off, redir_##name)
117 
118 #define GCR_ACCESSOR_RW(sz, off, name)					\
119 	CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_GCB_OFS + off, name)		\
120 	CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_COCB_OFS + off, redir_##name)
121 
122 #define GCR_CX_ACCESSOR_RO(sz, off, name)				\
123 	CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_CLCB_OFS + off, cl_##name)	\
124 	CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_COCB_OFS + off, co_##name)
125 
126 #define GCR_CX_ACCESSOR_RW(sz, off, name)				\
127 	CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_CLCB_OFS + off, cl_##name)	\
128 	CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_COCB_OFS + off, co_##name)
129 
130 /* GCR_CONFIG - Information about the system */
131 GCR_ACCESSOR_RO(64, 0x000, config)
132 #define CM_GCR_CONFIG_CLUSTER_COH_CAPABLE	BIT_ULL(43)
133 #define CM_GCR_CONFIG_CLUSTER_ID		GENMASK_ULL(39, 32)
134 #define CM_GCR_CONFIG_NUM_CLUSTERS		GENMASK(29, 23)
135 #define CM_GCR_CONFIG_NUMIOCU			GENMASK(15, 8)
136 #define CM_GCR_CONFIG_PCORES			GENMASK(7, 0)
137 
138 /* GCR_BASE - Base address of the Global Configuration Registers (GCRs) */
139 GCR_ACCESSOR_RW(64, 0x008, base)
140 #define CM_GCR_BASE_GCRBASE			GENMASK_ULL(47, 15)
141 #define CM_GCR_BASE_CMDEFTGT			GENMASK(1, 0)
142 #define  CM_GCR_BASE_CMDEFTGT_MEM		0
143 #define  CM_GCR_BASE_CMDEFTGT_RESERVED		1
144 #define  CM_GCR_BASE_CMDEFTGT_IOCU0		2
145 #define  CM_GCR_BASE_CMDEFTGT_IOCU1		3
146 
147 /* GCR_ACCESS - Controls core/IOCU access to GCRs */
148 GCR_ACCESSOR_RW(32, 0x020, access)
149 #define CM_GCR_ACCESS_ACCESSEN			GENMASK(7, 0)
150 
151 /* GCR_REV - Indicates the Coherence Manager revision */
152 GCR_ACCESSOR_RO(32, 0x030, rev)
153 #define CM_GCR_REV_MAJOR			GENMASK(15, 8)
154 #define CM_GCR_REV_MINOR			GENMASK(7, 0)
155 
156 #define CM_ENCODE_REV(major, minor) \
157 		(FIELD_PREP(CM_GCR_REV_MAJOR, major) | \
158 		 FIELD_PREP(CM_GCR_REV_MINOR, minor))
159 
160 #define CM_REV_CM2				CM_ENCODE_REV(6, 0)
161 #define CM_REV_CM2_5				CM_ENCODE_REV(7, 0)
162 #define CM_REV_CM3				CM_ENCODE_REV(8, 0)
163 #define CM_REV_CM3_5				CM_ENCODE_REV(9, 0)
164 
165 /* GCR_ERR_CONTROL - Control error checking logic */
166 GCR_ACCESSOR_RW(32, 0x038, err_control)
167 #define CM_GCR_ERR_CONTROL_L2_ECC_EN		BIT(1)
168 #define CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT	BIT(0)
169 
170 /* GCR_ERR_MASK - Control which errors are reported as interrupts */
171 GCR_ACCESSOR_RW(64, 0x040, error_mask)
172 
173 /* GCR_ERR_CAUSE - Indicates the type of error that occurred */
174 GCR_ACCESSOR_RW(64, 0x048, error_cause)
175 #define CM_GCR_ERROR_CAUSE_ERRTYPE		GENMASK(31, 27)
176 #define CM3_GCR_ERROR_CAUSE_ERRTYPE		GENMASK_ULL(63, 58)
177 #define CM_GCR_ERROR_CAUSE_ERRINFO		GENMASK(26, 0)
178 
179 /* GCR_ERR_ADDR - Indicates the address associated with an error */
180 GCR_ACCESSOR_RW(64, 0x050, error_addr)
181 
182 /* GCR_ERR_MULT - Indicates when multiple errors have occurred */
183 GCR_ACCESSOR_RW(64, 0x058, error_mult)
184 #define CM_GCR_ERROR_MULT_ERR2ND		GENMASK(4, 0)
185 
186 /* GCR_L2_ONLY_SYNC_BASE - Base address of the L2 cache-only sync region */
187 GCR_ACCESSOR_RW(64, 0x070, l2_only_sync_base)
188 #define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE	GENMASK(31, 12)
189 #define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN		BIT(0)
190 
191 /* GCR_GIC_BASE - Base address of the Global Interrupt Controller (GIC) */
192 GCR_ACCESSOR_RW(64, 0x080, gic_base)
193 #define CM_GCR_GIC_BASE_GICBASE			GENMASK(31, 17)
194 #define CM_GCR_GIC_BASE_GICEN			BIT(0)
195 
196 /* GCR_CPC_BASE - Base address of the Cluster Power Controller (CPC) */
197 GCR_ACCESSOR_RW(64, 0x088, cpc_base)
198 #define CM_GCR_CPC_BASE_CPCBASE			GENMASK(31, 15)
199 #define CM_GCR_CPC_BASE_CPCEN			BIT(0)
200 
201 /* GCR_REGn_BASE - Base addresses of CM address regions */
202 GCR_ACCESSOR_RW(64, 0x090, reg0_base)
203 GCR_ACCESSOR_RW(64, 0x0a0, reg1_base)
204 GCR_ACCESSOR_RW(64, 0x0b0, reg2_base)
205 GCR_ACCESSOR_RW(64, 0x0c0, reg3_base)
206 #define CM_GCR_REGn_BASE_BASEADDR		GENMASK(31, 16)
207 
208 /* GCR_REGn_MASK - Size & destination of CM address regions */
209 GCR_ACCESSOR_RW(64, 0x098, reg0_mask)
210 GCR_ACCESSOR_RW(64, 0x0a8, reg1_mask)
211 GCR_ACCESSOR_RW(64, 0x0b8, reg2_mask)
212 GCR_ACCESSOR_RW(64, 0x0c8, reg3_mask)
213 #define CM_GCR_REGn_MASK_ADDRMASK		GENMASK(31, 16)
214 #define CM_GCR_REGn_MASK_CCAOVR			GENMASK(7, 5)
215 #define CM_GCR_REGn_MASK_CCAOVREN		BIT(4)
216 #define CM_GCR_REGn_MASK_DROPL2			BIT(2)
217 #define CM_GCR_REGn_MASK_CMTGT			GENMASK(1, 0)
218 #define  CM_GCR_REGn_MASK_CMTGT_DISABLED	0x0
219 #define  CM_GCR_REGn_MASK_CMTGT_MEM		0x1
220 #define  CM_GCR_REGn_MASK_CMTGT_IOCU0		0x2
221 #define  CM_GCR_REGn_MASK_CMTGT_IOCU1		0x3
222 
223 /* GCR_GIC_STATUS - Indicates presence of a Global Interrupt Controller (GIC) */
224 GCR_ACCESSOR_RO(32, 0x0d0, gic_status)
225 #define CM_GCR_GIC_STATUS_EX			BIT(0)
226 
227 /* GCR_CPC_STATUS - Indicates presence of a Cluster Power Controller (CPC) */
228 GCR_ACCESSOR_RO(32, 0x0f0, cpc_status)
229 #define CM_GCR_CPC_STATUS_EX			BIT(0)
230 
231 /* GCR_L2_CONFIG - Indicates L2 cache configuration when Config5.L2C=1 */
232 GCR_ACCESSOR_RW(32, 0x130, l2_config)
233 #define CM_GCR_L2_CONFIG_BYPASS			BIT(20)
234 #define CM_GCR_L2_CONFIG_SET_SIZE		GENMASK(15, 12)
235 #define CM_GCR_L2_CONFIG_LINE_SIZE		GENMASK(11, 8)
236 #define CM_GCR_L2_CONFIG_ASSOC			GENMASK(7, 0)
237 
238 /* GCR_SYS_CONFIG2 - Further information about the system */
239 GCR_ACCESSOR_RO(32, 0x150, sys_config2)
240 #define CM_GCR_SYS_CONFIG2_MAXVPW		GENMASK(3, 0)
241 
242 /* GCR_L2_PFT_CONTROL - Controls hardware L2 prefetching */
243 GCR_ACCESSOR_RW(32, 0x300, l2_pft_control)
244 #define CM_GCR_L2_PFT_CONTROL_PAGEMASK		GENMASK(31, 12)
245 #define CM_GCR_L2_PFT_CONTROL_PFTEN		BIT(8)
246 #define CM_GCR_L2_PFT_CONTROL_NPFT		GENMASK(7, 0)
247 
248 /* GCR_L2_PFT_CONTROL_B - Controls hardware L2 prefetching */
249 GCR_ACCESSOR_RW(32, 0x308, l2_pft_control_b)
250 #define CM_GCR_L2_PFT_CONTROL_B_CEN		BIT(8)
251 #define CM_GCR_L2_PFT_CONTROL_B_PORTID		GENMASK(7, 0)
252 
253 /* GCR_L2SM_COP - L2 cache op state machine control */
254 GCR_ACCESSOR_RW(32, 0x620, l2sm_cop)
255 #define CM_GCR_L2SM_COP_PRESENT			BIT(31)
256 #define CM_GCR_L2SM_COP_RESULT			GENMASK(8, 6)
257 #define  CM_GCR_L2SM_COP_RESULT_DONTCARE	0
258 #define  CM_GCR_L2SM_COP_RESULT_DONE_OK		1
259 #define  CM_GCR_L2SM_COP_RESULT_DONE_ERROR	2
260 #define  CM_GCR_L2SM_COP_RESULT_ABORT_OK	3
261 #define  CM_GCR_L2SM_COP_RESULT_ABORT_ERROR	4
262 #define CM_GCR_L2SM_COP_RUNNING			BIT(5)
263 #define CM_GCR_L2SM_COP_TYPE			GENMASK(4, 2)
264 #define  CM_GCR_L2SM_COP_TYPE_IDX_WBINV		0
265 #define  CM_GCR_L2SM_COP_TYPE_IDX_STORETAG	1
266 #define  CM_GCR_L2SM_COP_TYPE_IDX_STORETAGDATA	2
267 #define  CM_GCR_L2SM_COP_TYPE_HIT_INV		4
268 #define  CM_GCR_L2SM_COP_TYPE_HIT_WBINV		5
269 #define  CM_GCR_L2SM_COP_TYPE_HIT_WB		6
270 #define  CM_GCR_L2SM_COP_TYPE_FETCHLOCK		7
271 #define CM_GCR_L2SM_COP_CMD			GENMASK(1, 0)
272 #define  CM_GCR_L2SM_COP_CMD_START		1	/* only when idle */
273 #define  CM_GCR_L2SM_COP_CMD_ABORT		3	/* only when running */
274 
275 /* GCR_L2SM_TAG_ADDR_COP - L2 cache op state machine address control */
276 GCR_ACCESSOR_RW(64, 0x628, l2sm_tag_addr_cop)
277 #define CM_GCR_L2SM_TAG_ADDR_COP_NUM_LINES	GENMASK_ULL(63, 48)
278 #define CM_GCR_L2SM_TAG_ADDR_COP_START_TAG	GENMASK_ULL(47, 6)
279 
280 /* GCR_BEV_BASE - Controls the location of the BEV for powered up cores */
281 GCR_ACCESSOR_RW(64, 0x680, bev_base)
282 
283 /* GCR_Cx_RESET_RELEASE - Controls core reset for CM 1.x */
284 GCR_CX_ACCESSOR_RW(32, 0x000, reset_release)
285 
286 /* GCR_Cx_COHERENCE - Controls core coherence */
287 GCR_CX_ACCESSOR_RW(32, 0x008, coherence)
288 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN		GENMASK(7, 0)
289 #define CM3_GCR_Cx_COHERENCE_COHEN		BIT(0)
290 
291 /* GCR_Cx_CONFIG - Information about a core's configuration */
292 GCR_CX_ACCESSOR_RO(32, 0x010, config)
293 #define CM_GCR_Cx_CONFIG_IOCUTYPE		GENMASK(11, 10)
294 #define CM_GCR_Cx_CONFIG_PVPE			GENMASK(9, 0)
295 
296 /* GCR_Cx_OTHER - Configure the core-other/redirect GCR block */
297 GCR_CX_ACCESSOR_RW(32, 0x018, other)
298 #define CM_GCR_Cx_OTHER_CORENUM			GENMASK(31, 16)	/* CM < 3 */
299 #define CM_GCR_Cx_OTHER_CLUSTER_EN		BIT(31)		/* CM >= 3.5 */
300 #define CM_GCR_Cx_OTHER_GIC_EN			BIT(30)		/* CM >= 3.5 */
301 #define CM_GCR_Cx_OTHER_BLOCK			GENMASK(25, 24)	/* CM >= 3.5 */
302 #define  CM_GCR_Cx_OTHER_BLOCK_LOCAL		0
303 #define  CM_GCR_Cx_OTHER_BLOCK_GLOBAL		1
304 #define  CM_GCR_Cx_OTHER_BLOCK_USER		2
305 #define  CM_GCR_Cx_OTHER_BLOCK_GLOBAL_HIGH	3
306 #define CM_GCR_Cx_OTHER_CLUSTER			GENMASK(21, 16)	/* CM >= 3.5 */
307 #define CM3_GCR_Cx_OTHER_CORE			GENMASK(13, 8)	/* CM >= 3 */
308 #define  CM_GCR_Cx_OTHER_CORE_CM		32
309 #define CM3_GCR_Cx_OTHER_VP			GENMASK(2, 0)	/* CM >= 3 */
310 
311 /* GCR_Cx_RESET_BASE - Configure where powered up cores will fetch from */
312 GCR_CX_ACCESSOR_RW(32, 0x020, reset_base)
313 #define CM_GCR_Cx_RESET_BASE_BEVEXCBASE		GENMASK(31, 12)
314 
315 /* GCR_Cx_ID - Identify the current core */
316 GCR_CX_ACCESSOR_RO(32, 0x028, id)
317 #define CM_GCR_Cx_ID_CLUSTER			GENMASK(15, 8)
318 #define CM_GCR_Cx_ID_CORE			GENMASK(7, 0)
319 
320 /* GCR_Cx_RESET_EXT_BASE - Configure behaviour when cores reset or power up */
321 GCR_CX_ACCESSOR_RW(32, 0x030, reset_ext_base)
322 #define CM_GCR_Cx_RESET_EXT_BASE_EVARESET	BIT(31)
323 #define CM_GCR_Cx_RESET_EXT_BASE_UEB		BIT(30)
324 #define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK	GENMASK(27, 20)
325 #define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA	GENMASK(7, 1)
326 #define CM_GCR_Cx_RESET_EXT_BASE_PRESENT	BIT(0)
327 
328 /**
329  * mips_cm_l2sync - perform an L2-only sync operation
330  *
331  * If an L2-only sync region is present in the system then this function
332  * performs and L2-only sync and returns zero. Otherwise it returns -ENODEV.
333  */
mips_cm_l2sync(void)334 static inline int mips_cm_l2sync(void)
335 {
336 	if (!mips_cm_has_l2sync())
337 		return -ENODEV;
338 
339 	writel(0, mips_cm_l2sync_base);
340 	return 0;
341 }
342 
343 /**
344  * mips_cm_revision() - return CM revision
345  *
346  * Return: The revision of the CM, from GCR_REV, or 0 if no CM is present. The
347  * return value should be checked against the CM_REV_* macros.
348  */
mips_cm_revision(void)349 static inline int mips_cm_revision(void)
350 {
351 	if (!mips_cm_present())
352 		return 0;
353 
354 	return read_gcr_rev();
355 }
356 
357 /**
358  * mips_cm_max_vp_width() - return the width in bits of VP indices
359  *
360  * Return: the width, in bits, of VP indices in fields that combine core & VP
361  * indices.
362  */
mips_cm_max_vp_width(void)363 static inline unsigned int mips_cm_max_vp_width(void)
364 {
365 	extern int smp_num_siblings;
366 
367 	if (mips_cm_revision() >= CM_REV_CM3)
368 		return FIELD_GET(CM_GCR_SYS_CONFIG2_MAXVPW,
369 				 read_gcr_sys_config2());
370 
371 	if (mips_cm_present()) {
372 		/*
373 		 * We presume that all cores in the system will have the same
374 		 * number of VP(E)s, and if that ever changes then this will
375 		 * need revisiting.
376 		 */
377 		return FIELD_GET(CM_GCR_Cx_CONFIG_PVPE, read_gcr_cl_config()) + 1;
378 	}
379 
380 	if (IS_ENABLED(CONFIG_SMP))
381 		return smp_num_siblings;
382 
383 	return 1;
384 }
385 
386 /**
387  * mips_cm_vp_id() - calculate the hardware VP ID for a CPU
388  * @cpu: the CPU whose VP ID to calculate
389  *
390  * Hardware such as the GIC uses identifiers for VPs which may not match the
391  * CPU numbers used by Linux. This function calculates the hardware VP
392  * identifier corresponding to a given CPU.
393  *
394  * Return: the VP ID for the CPU.
395  */
mips_cm_vp_id(unsigned int cpu)396 static inline unsigned int mips_cm_vp_id(unsigned int cpu)
397 {
398 	unsigned int core = cpu_core(&cpu_data[cpu]);
399 	unsigned int vp = cpu_vpe_id(&cpu_data[cpu]);
400 
401 	return (core * mips_cm_max_vp_width()) + vp;
402 }
403 
404 #ifdef CONFIG_MIPS_CM
405 
406 /**
407  * mips_cm_lock_other - lock access to redirect/other region
408  * @cluster: the other cluster to be accessed
409  * @core: the other core to be accessed
410  * @vp: the VP within the other core to be accessed
411  * @block: the register block to be accessed
412  *
413  * Configure the redirect/other region for the local core/VP (depending upon
414  * the CM revision) to target the specified @cluster, @core, @vp & register
415  * @block. Must be called before using the redirect/other region, and followed
416  * by a call to mips_cm_unlock_other() when access to the redirect/other region
417  * is complete.
418  *
419  * This function acquires a spinlock such that code between it &
420  * mips_cm_unlock_other() calls cannot be pre-empted by anything which may
421  * reconfigure the redirect/other region, and cannot be interfered with by
422  * another VP in the core. As such calls to this function should not be nested.
423  */
424 extern void mips_cm_lock_other(unsigned int cluster, unsigned int core,
425 			       unsigned int vp, unsigned int block);
426 
427 /**
428  * mips_cm_unlock_other - unlock access to redirect/other region
429  *
430  * Must be called after mips_cm_lock_other() once all required access to the
431  * redirect/other region has been completed.
432  */
433 extern void mips_cm_unlock_other(void);
434 
435 #else /* !CONFIG_MIPS_CM */
436 
mips_cm_lock_other(unsigned int cluster,unsigned int core,unsigned int vp,unsigned int block)437 static inline void mips_cm_lock_other(unsigned int cluster, unsigned int core,
438 				      unsigned int vp, unsigned int block) { }
mips_cm_unlock_other(void)439 static inline void mips_cm_unlock_other(void) { }
440 
441 #endif /* !CONFIG_MIPS_CM */
442 
443 /**
444  * mips_cm_lock_other_cpu - lock access to redirect/other region
445  * @cpu: the other CPU whose register we want to access
446  *
447  * Configure the redirect/other region for the local core/VP (depending upon
448  * the CM revision) to target the specified @cpu & register @block. This is
449  * equivalent to calling mips_cm_lock_other() but accepts a Linux CPU number
450  * for convenience.
451  */
mips_cm_lock_other_cpu(unsigned int cpu,unsigned int block)452 static inline void mips_cm_lock_other_cpu(unsigned int cpu, unsigned int block)
453 {
454 	struct cpuinfo_mips *d = &cpu_data[cpu];
455 
456 	mips_cm_lock_other(cpu_cluster(d), cpu_core(d), cpu_vpe_id(d), block);
457 }
458 
459 #endif /* __MIPS_ASM_MIPS_CM_H__ */
460