| /linux-5.19.10/drivers/hwmon/pmbus/ |
| D | Kconfig | 10 Say yes here if you want to enable PMBus support.
21 If you say yes here you get hardware monitoring support for generic
35 If you say yes here you get hardware monitoring support for Analog
44 If you say yes here you get hardware monitoring support for Analog
54 If you say yes here you get hardware monitoring support for BEL
63 If you say yes here you get hardware monitoring support for BluTek
72 If you say yes here you get hardware monitoring support for
82 If you say yes here you get hardware monitoring support for
93 If you say yes here you get hardware monitoring support for the IBM
102 If you say yes here you get hardware monitoring support for Delta
[all …]
|
| /linux-5.19.10/Documentation/process/ |
| D | management-style.rst | 7 on who you ask) management style for the linux kernel. It's meant to
19 companies. If you sign purchase orders or you have any clue about the
20 budget of your group, you're almost certainly not a kernel manager.
21 These suggestions may or may not apply to you.
43 particular, if somebody tells you "choose (a) or (b), we really need you
44 to decide on this", you're in trouble as a manager. The people you
45 manage had better know the details better than you, so if they come to
46 you for a technical decision, you're screwed. You're clearly not
49 (Corollary:if the people you manage don't know the details better than
50 you, you're also screwed, although for a totally different reason.
[all …]
|
| D | maintainer-pgp-guide.rst | 66 Your distro should already have GnuPG installed by default, you just
67 need to verify that you are using version 2.x and not the legacy 1.4
73 If you see ``gpg (GnuPG) 1.4.x``, then you are using GnuPG v.1. Try the
74 ``gpg2`` command (if you don't have it, you may need to install the
79 If you see ``gpg (GnuPG) 2.x.x``, then you are good to go. This guide
80 will assume you have the version 2.2 of GnuPG (or later). If you are
82 not work, and you should consider installing the latest 2.2 version of
86 If you have both ``gpg`` and ``gpg2`` commands, you should make sure you
98 you use the ``gpg`` command and run in the background with the purpose
99 of caching the private key passphrase. There are two options you should
[all …]
|
| D | 6.Followthrough.rst | 6 At this point, you have followed the guidelines given so far and, with the
28 process. Life can be made much easier, though, if you keep a few things in
31 - If you have explained your patch well, reviewers will understand its
32 value and why you went to the trouble of writing it. But that value
35 Many of the changes you may be asked to make - from coding style tweaks
42 they see the same mistakes being made over and over again. If you get a
45 the people, and code reviewers are not attacking you personally.
54 What all of this comes down to is that, when reviewers send you comments,
55 you need to pay attention to the technical observations that they are
57 from happening. When you get review comments on a patch, take the time to
[all …]
|
| /linux-5.19.10/drivers/hwmon/ |
| D | Kconfig | 11 Hardware monitoring devices let you monitor the hardware health
15 control the speed of the fans. If you want this support you
19 To find out which specific driver(s) you need, use the
34 Say Y here if you want the I2C chip drivers to produce a bunch of
35 debug messages to the system log. Select this if you are having
45 If you say yes here you get support for the sensor part of the first
60 If you say yes here you get support for the sensor part of the
74 If you say yes here you get support for the Analog Devices
84 If you say yes here you get support for the Analog Devices
94 If you say yes here you get support for the Analog Devices
[all …]
|
| /linux-5.19.10/drivers/rtc/ |
| D | Kconfig | 19 Generic RTC class support. If you say yes here, you will
29 If you say yes here, the system time (wall clock) will be set using
48 If the clock you specify here is not battery backed, it may still
57 If you say yes here, the system time (wall clock) will be stored
102 Say yes here if you want to use your RTCs using sysfs interfaces,
112 Say yes here if you want to use your system clock RTC through
124 Say yes here if you want to use your RTCs using the /dev
131 versions of "udev" are known to set up the symlink for you.
145 only if you know that you really need it.
150 If you say yes here you get support for the
[all …]
|
| /linux-5.19.10/drivers/block/paride/ |
| D | Kconfig | 17 connected through a parallel port. If you chose to build PARIDE
18 support into your kernel, you may answer Y here to build in the
19 parallel port IDE driver, otherwise you should answer M to build
32 connected through a parallel port. If you chose to build PARIDE
33 support into your kernel, you may answer Y here to build in the
34 parallel port ATAPI CD-ROM driver, otherwise you should answer M to
39 you have such a CD-ROM drive, you should also say Y or M to "ISO
48 connected through a parallel port. If you chose to build PARIDE
49 support into your kernel, you may answer Y here to build in the
50 parallel port ATAPI disk driver, otherwise you should answer M
[all …]
|
| /linux-5.19.10/drivers/w1/slaves/ |
| D | Kconfig | 11 Say Y here if you want to connect 1-wire thermal sensors to your
17 Say Y here if you want to connect 1-wire
23 Say Y or M here if you want to use a DS2405 1-wire
31 Say Y here if you want to use a 1-wire
47 Say Y here if you want to use a 1-wire
54 Say Y or M here if you want to use a 1-wire
62 If you enable this you can read the counter values available
66 Say Y here if you want to use a 1-wire
72 Say Y here if you want to use a 1-wire
80 Say Y here if you want to use a 1-wire 256bit EEPROM
[all …]
|
| /linux-5.19.10/arch/arm/mach-orion5x/ |
| D | Kconfig | 28 Say 'Y' here if you want your kernel to support the
35 Say 'Y' here if you want your kernel to support the
42 Say 'Y' here if you want your kernel to support the
50 Say 'Y' here if you want your kernel to support the Marvell
57 Say 'Y' here if you want your kernel to support the
64 Say 'Y' here if you want your kernel to support the
70 Say 'Y' here if you want your kernel to support the
76 Say 'Y' here if you want your kernel to support the
83 Say 'Y' here if you want your kernel to support the
91 Say 'Y' here if you want your kernel to support the
[all …]
|
| /linux-5.19.10/drivers/media/dvb-frontends/ |
| D | Kconfig | 20 Say Y when you want to support this frontend.
29 Say Y when you want to support these frontends.
36 A DVB-S/S2/DSS Multistandard demodulator. Say Y when you want
45 demodulator. Say Y when you want to support this tuner.
53 Say Y when you want to support these frontends.
62 Say Y when you want to support these frontends.
78 Say Y when you want to support these frontends.
90 Say Y when you want to support this frontend.
98 Say Y when you want to support this frontend.
106 Say Y when you want to support this frontend.
[all …]
|
| /linux-5.19.10/drivers/iio/temperature/ |
| D | Kconfig | 11 Say Y here if you want to build support for the Azoteq IQS620AT
34 If you say yes here you get support for the Maxim series of
61 If you say yes here you get support for the Melexis
72 If you say yes here you get support for the Melexis
83 If you say yes here you get support for the Texas Instruments
93 If you say yes here you get support for the Texas Instruments
103 If you say yes here you get support for the Texas Instruments
114 If you say yes here you get support for the Measurement Specialties
125 If you say yes here you get support for the Measurement Specialties
135 If you say yes here you get support for MAX31856
[all …]
|
| /linux-5.19.10/arch/arm/mach-ep93xx/ |
| D | Kconfig | 30 Say 'Y' here if you want your kernel to support the ADS
37 Say 'Y' here if you want your kernel to support the
47 Say 'Y' here if you want your kernel to support the Cirrus
54 Say 'Y' here if you want your kernel to support the Cirrus
61 Say 'Y' here if you want your kernel to support the Cirrus
68 Say 'Y' here if you want your kernel to support the Cirrus
75 Say 'Y' here if you want your kernel to support the Cirrus
82 Say 'Y' here if you want your kernel to support the Cirrus
89 Say 'Y' here if you want your kernel to support the Cirrus
96 Say 'Y' here if you want your kernel to support the Cirrus
[all …]
|
| /linux-5.19.10/Documentation/filesystems/ |
| D | journalling.rst | 12 how you decide to allocate the physical media on which the journal
16 journal_t is a typedef for a struct pointer, so when you are finally
17 finished make sure you call jbd2_journal_destroy() on it to free up
20 Once you have got your journal_t object you need to 'mount' or load the
23 When loading the journal you must call jbd2_journal_load() to process
30 jbd2_journal_skip_recovery() for you if it detects any outstanding
35 Now you can go ahead and start modifying the underlying filesystem.
39 by wrapping them into transactions. Additionally you also need to wrap
41 so it knows what the modifications you are actually making are. To do
45 which indicates the end of a transaction are nestable calls, so you can
[all …]
|
| /linux-5.19.10/drivers/clk/qcom/ |
| D | Kconfig | 28 Say Y if you want to support higher CPU frequencies on MSM8916
36 Say Y if you want to support higher CPU frequencies on SDX55 and SDX65
45 Say Y if you want to support CPU frequency scaling on devices
54 Say Y if you want to support CPU clock scaling using CPUfreq
63 Say Y if you want to support CPU frequency scaling on devices
76 Say Y if you want to support the clocks exposed by the RPM on
89 Say Y if you want to support the clocks exposed by the RPM on
98 Say Y if you want to support the clocks exposed by RPMh on
106 Say Y if you want to use peripheral devices such as UART, SPI,
115 Say Y if you want to support multimedia devices such as display,
[all …]
|
| /linux-5.19.10/fs/jbd2/ |
| D | Kconfig | 14 If you are using ext4 or OCFS2, you need to say Y here.
15 If you are not using ext4 or OCFS2 then you will
19 called jbd2. If you are compiling ext4 or OCFS2 into the kernel,
20 you cannot compile this code as a module.
26 If you are using the ext4 journaled file system (or
28 allows you to enable debugging output while the system is running,
29 in order to help track down any problems you are having.
32 If you select Y here, then you will be able to turn on debugging
|
| /linux-5.19.10/Documentation/hid/ |
| D | uhid.rst | 19 dynamically so you need to rely on udev (or similar) to create the device node.
22 If a new device is detected by your HID I/O Driver and you want to register this
23 device with the HID subsystem, then you need to open /dev/uhid once for each
24 device you want to register. All further communication is done by read()'ing or
42 If you want to handle multiple events in a single syscall, then use vectored
48 The first thing you should do is send a UHID_CREATE2 event. This will
52 That is, you might put your device asleep unless you receive the UHID_OPEN
53 event. If you receive the UHID_OPEN event, you should start I/O. If the last
54 user closes the HID device, you will receive a UHID_CLOSE event. This may be
56 reference-counting in user-space. That is, you will never receive multiple
[all …]
|
| /linux-5.19.10/drivers/media/rc/ |
| D | Kconfig | 11 Enable this option if you have a video capture board even
12 if you don't need IR, as otherwise, you may not be able to
15 Say Y when you have a TV or an IR device.
50 Enable this option if you have iMON PAD or Antec Veris infrared
51 remote control and you would like to use it with a raw IR
52 receiver, or if you wish to use an encoder to transmit this IR.
59 Enable this option if you have an infrared remote control which
60 uses the JVC protocol, and you need software decoding support.
67 Enable this option if you have a Microsoft Remote Keyboard for
68 Windows Media Center Edition, which you would like to use with
[all …]
|
| /linux-5.19.10/drivers/pps/clients/ |
| D | Kconfig | 11 If you say yes here you get support for a PPS debugging client
21 If you say yes here you get support for a PPS source connected
28 If you say yes here you get support for a PPS source connected
34 If you say yes here you get support for a PPS source using
35 GPIO. To be useful you must also register a platform device
|
| /linux-5.19.10/fs/nls/ |
| D | Kconfig | 35 If you specify a wrong value, it will use the built-in NLS;
46 codepage if you want to be able to read/write these filenames on
49 say Y here if you want to include the DOS codepage that is used in
58 codepage if you want to be able to read/write these filenames on
61 say Y here if you want to include the DOS codepage that is used for
70 codepage if you want to be able to read/write these filenames on
73 say Y here if you want to include the DOS codepage that is used
83 codepage if you want to be able to read/write these filenames on
86 say Y here if you want to include the DOS codepage that is used for
99 codepage if you want to be able to read/write these filenames on
[all …]
|
| /linux-5.19.10/Documentation/networking/ |
| D | arcnet.rst | 10 and cabling information if you're like many of us and didn't happen to get a
22 The point is: I REALLY REALLY REALLY REALLY REALLY want to hear from you if
23 you test this and get it working. Or if you don't. Or anything.
36 If you don't e-mail me about your success/failure soon, I may be forced to
40 If you think so, why not flame me in a quick little e-mail? Please also
41 include the type of card(s) you're using, software, size of network, and
87 Also, SMC (one of the companies that makes ARCnet cards) has a WWW site you
102 one you'll want to use with ARCnet cards) from
105 versions are available on my WWW page, or via e-mail if you don't have WWW
112 All you will need to do in order to install the driver is::
[all …]
|
| /linux-5.19.10/drivers/thermal/ti-soc-thermal/ |
| D | Kconfig | 5 If you say yes here you get support for the Texas Instruments
16 If you say yes here you want to get support for generic thermal
27 If you say yes here you get thermal support for the Texas Instruments
42 If you say yes here you get thermal support for the Texas Instruments
56 If you say yes here you get thermal support for the Texas Instruments
68 If you say yes here you get thermal support for the Texas Instruments
|
| /linux-5.19.10/Documentation/dev-tools/ |
| D | kgdb.rst | 12 debugger front ends and dynamically transition between them if you
15 Kdb is simplistic shell-style interface which you can use on a system
19 you can set breakpoints and execute some basic kernel run control. Kdb
46 - In order to enable compilation of kdb, you must first enable kgdb.
54 To enable ``CONFIG_KGDB`` you should look under
58 While it is not a hard requirement that you have symbols in your vmlinux
59 file, gdb tends not to be very useful without the symbolic data, so you
63 It is advised, but not required, that you turn on the
70 If the architecture that you are using supports the kernel option
71 ``CONFIG_STRICT_KERNEL_RWX``, you should consider turning it off. This
[all …]
|
| /linux-5.19.10/Documentation/driver-api/media/ |
| D | v4l2-dev.rst | 21 If you embed it in a larger struct, then you must set the ``release()``
54 - :c:type:`video_device`->ioctl_ops: if you use the :c:type:`v4l2_ioctl_ops`
64 - :c:type:`video_device`->lock: leave to ``NULL`` if you want to do all the
65 locking in the driver. Otherwise you give it a pointer to a struct
85 in :c:type:`v4l2_device`. If you want to have a separate priority state per
86 (group of) device node(s), then you can point it to your own struct
89 - :c:type:`video_device`->dev_parent: you only set this if v4l2_device was
98 struct video_device is initialized you **do** know which parent
99 PCI device to use and so you set ``dev_device`` to the correct PCI device.
101 If you use :c:type:`v4l2_ioctl_ops`, then you should set
[all …]
|
| /linux-5.19.10/Documentation/admin-guide/ |
| D | reporting-issues.rst | 11 Are you facing a regression with vanilla kernels from the same stable or
15 you don't find any, install `the latest release from that series
25 search the `LKML <https://lore.kernel.org/lkml/>`_ and the web, too. If you
29 The issue was fixed there, but you would like to see it resolved in a still
40 If you are facing multiple issues with the Linux kernel at once, report each
44 to pin-point the culprit with a bisection; if you succeed, include its
47 Once the report is out, answer any questions that come up and help where you
63 a slightly different order. That's in your interest, to make sure you notice
65 something else. These steps thus help to ensure the time you invest in this
68 * Are you facing an issue with a Linux kernel a hardware or software vendor
[all …]
|
| /linux-5.19.10/drivers/gpu/drm/exynos/ |
| D | Kconfig | 12 Choose this option if you have a Samsung SoC Exynos chipset.
24 Choose this option if you want to use Exynos FIMD for DRM.
29 Choose this option if you want to use Exynos5433 DECON for DRM.
35 Choose this option if you want to use Exynos DECON for DRM.
40 Choose this option if you want to use Exynos Mixer for DRM.
45 Choose this option if you want to use Exynos VIDI for DRM.
81 Choose this option if you want to use Exynos HDMI for DRM.
87 Choose this option if you want to use Exynos MIC for DRM.
95 Choose this option if you want to use Exynos G2D for DRM.
104 Choose this option if you want to use Exynos FIMC for DRM.
[all …]
|