Searched refs:rtl818x_ioread8 (Results 1 – 12 of 12) sorted by relevance
/linux-5.19.10/drivers/net/wireless/realtek/rtl818x/rtl8180/ |
D | rtl8225.c | 38 rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); in rtl8225_write() 42 rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); in rtl8225_write() 45 rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); in rtl8225_write() 65 rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); in rtl8225_write() 89 rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); in rtl8225_read() 92 rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); in rtl8225_read() 100 rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); in rtl8225_read() 106 rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); in rtl8225_read() 110 rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); in rtl8225_read() 115 rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); in rtl8225_read() [all …]
|
D | dev.c | 206 if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF)) in rtl8180_write_phy() 603 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); in rtl8180_set_anaparam3() 623 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); in rtl8180_set_anaparam2() 641 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); in rtl8180_set_anaparam() 660 rtl818x_ioread8(priv, REG_ADDR1(0x1F8)); in rtl8187se_mac_config() 662 reg = rtl818x_ioread8(priv, &priv->map->PHY_PR); in rtl8187se_mac_config() 802 reg8 = rtl818x_ioread8(priv, &priv->map->CONFIG3); in rtl8180_config_cardbus() 823 rtl818x_ioread8(priv, &priv->map->CMD); in rtl8180_init_hw() 828 rtl818x_ioread8(priv, &priv->map->CMD); in rtl8180_init_hw() 830 reg = rtl818x_ioread8(priv, &priv->map->CMD); in rtl8180_init_hw() [all …]
|
D | rtl8225se.c | 84 tmp = rtl818x_ioread8(priv, SW_3W_CMD1); in rtl8187se_three_wire_io() 93 tmp = rtl818x_ioread8(priv, &priv->map->rf_sw_config) | 0x02; in rtl8187se_three_wire_io() 96 tmp = rtl818x_ioread8(priv, REG_ADDR1(0x84)) & 0xF7; in rtl8187se_three_wire_io() 119 tmp = rtl818x_ioread8(priv, SW_3W_CMD1); in rtl8187se_three_wire_io() 354 rtl818x_ioread8(priv, REG_ADDR1(0x24E)) & 0x9F); in rtl8225se_rf_init()
|
D | max2820.c | 145 if (rtl818x_ioread8(priv, &priv->map->CONFIG2) & in max2820_rf_init()
|
D | rtl8180.h | 153 static inline u8 rtl818x_ioread8(struct rtl8180_priv *priv, const u8 __iomem *addr) in rtl818x_ioread8() function
|
D | grf5101.c | 168 if (rtl818x_ioread8(priv, &priv->map->CONFIG2) & in grf5101_rf_init()
|
D | sa2400.c | 207 if (rtl818x_ioread8(priv, &priv->map->CONFIG2) & in sa2400_rf_init()
|
/linux-5.19.10/drivers/net/wireless/realtek/rtl818x/rtl8187/ |
D | leds.c | 46 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 4); in led_turn_on() 50 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 5); in led_turn_on() 84 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 4); in led_turn_off() 88 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 5); in led_turn_off()
|
D | rfkill.c | 24 gpio = rtl818x_ioread8(priv, &priv->map->GPIO0); in rtl8187_is_radio_enabled() 26 gpio = rtl818x_ioread8(priv, &priv->map->GPIO1); in rtl8187_is_radio_enabled()
|
D | dev.c | 597 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); in rtl8187_set_anaparam() 616 reg = rtl818x_ioread8(priv, &priv->map->CMD); in rtl8187_cmd_reset() 624 if (!(rtl818x_ioread8(priv, &priv->map->CMD) & in rtl8187_cmd_reset() 640 if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) & in rtl8187_cmd_reset() 687 reg = rtl818x_ioread8(priv, &priv->map->CONFIG1); in rtl8187_init_hw() 705 reg = rtl818x_ioread8(priv, (u8 *)0xFE53); in rtl8187_init_hw() 729 reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1; in rtl8187_init_hw() 780 reg = rtl818x_ioread8(priv, (u8 *)0xFF62); in rtl8187b_init_hw() 795 reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); in rtl8187b_init_hw() 807 reg = rtl818x_ioread8(priv, &priv->map->CONFIG1); in rtl8187b_init_hw() [all …]
|
D | rtl8187.h | 163 static inline u8 rtl818x_ioread8(struct rtl8187_priv *priv, u8 *addr) in rtl818x_ioread8() function
|
D | rtl8225.c | 403 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); in rtl8225_rf_set_tx_power() 654 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); in rtl8225z2_rf_set_tx_power()
|