| /linux-5.19.10/drivers/accessibility/speakup/ ! |
| D | DefaultKeyAssignments | 12 InsKeyPad-8 say from top of screen to reading cursor.
18 InsKeyPad-4 say from left edge of line to reading cursor.
20 InsKeyPad-6 Say from reading cursor to right edge of line.
26 InsKeyPad-plus Say from reading cursor line to bottom of screen.
27 KeyPad-Minus Park reading cursor (toggle)
31 InsKeyPad-9 Move reading cursor to top of screen (insert pgup)
32 InsKeyPad-3 Move reading cursor to bottom of screen (insert pgdn)
33 InsKeyPad-7 Move reading cursor to left edge of screen (insert home)
34 InsKeyPad-1 Move reading cursor to right edge of screen (insert end)
35 ControlKeyPad-1 Move reading cursor to last character on current line.
[all …]
|
| /linux-5.19.10/drivers/hwmon/ ! |
| D | powr1220.c | 110 int reading; in powr1220_read_adc() local
145 reading = result >> 4; in powr1220_read_adc()
152 reading |= result << 4; in powr1220_read_adc()
155 reading *= ADC_STEP_MV; in powr1220_read_adc()
156 data->adc_values[ch_num] = reading; in powr1220_read_adc()
159 result = reading; in powr1220_read_adc()
161 if (reading > data->adc_maxes[ch_num]) in powr1220_read_adc()
162 data->adc_maxes[ch_num] = reading; in powr1220_read_adc()
|
| /linux-5.19.10/tools/perf/util/bpf_skel/ ! |
| D | bpf_prog_profiler.bpf.c | 79 struct bpf_perf_event_value reading; in BPF_PROG() local
84 err = bpf_perf_event_read_value(&events, cpu, &reading, sizeof(reading)); in BPF_PROG()
88 fexit_update_maps(&reading); in BPF_PROG()
|
| /linux-5.19.10/Documentation/ABI/testing/ ! |
| D | sysfs-kernel-mm-damon | 109 Description: Writing to and reading from this file sets and gets the pid of
126 Description: Writing to and reading from this file sets and gets the start
132 Description: Writing to and reading from this file sets and gets the end
145 Description: Writing to and reading from this file sets and gets the action
151 Description: Writing to and reading from this file sets and gets the mimimum
157 Description: Writing to and reading from this file sets and gets the maximum
163 Description: Writing to and reading from this file sets and gets the manimum
169 Description: Writing to and reading from this file sets and gets the maximum
175 Description: Writing to and reading from this file sets and gets the minimum
181 Description: Writing to and reading from this file sets and gets the maximum
[all …]
|
| /linux-5.19.10/drivers/media/usb/gspca/ ! |
| D | sn9c2028.c | 100 static int sn9c2028_read4(struct gspca_dev *gspca_dev, u8 *reading) in sn9c2028_read4() argument
112 memcpy(reading, gspca_dev->usb_buf, 4); in sn9c2028_read4()
114 reading[0], reading[1], reading[2], reading[3]); in sn9c2028_read4()
121 __u8 reading[4]; in sn9c2028_long_command() local
135 memset(reading, 0, 4); in sn9c2028_long_command()
136 status = sn9c2028_read4(gspca_dev, reading); in sn9c2028_long_command()
|
| /linux-5.19.10/tools/bpf/bpftool/skeleton/ ! |
| D | profiler.bpf.c | 56 struct bpf_perf_event_value reading; in BPF_PROG() local
59 err = bpf_perf_event_read_value(&events, key, &reading, in BPF_PROG()
60 sizeof(reading)); in BPF_PROG()
63 *(ptrs[i]) = reading; in BPF_PROG()
|
| /linux-5.19.10/Documentation/devicetree/bindings/hwmon/ ! |
| D | adc128d818.txt | 7 1 temperature reading (internal)
12 1 temperature reading (internal)
16 1 temperature reading (internal)
|
| /linux-5.19.10/drivers/macintosh/ ! |
| D | via-macii.c | 110 reading, enumerator
406 macii_state = reading; in macii_interrupt()
441 macii_state = reading; in macii_interrupt()
455 macii_state = reading; in macii_interrupt()
465 macii_state = reading; in macii_interrupt()
501 case reading: in macii_interrupt()
|
| /linux-5.19.10/Documentation/locking/ ! |
| D | percpu-rw-semaphore.rst | 6 optimized for locking for reading.
9 cores take the lock for reading, the cache line containing the semaphore
13 Locking for reading is very fast, it uses RCU and it avoids any atomic
|
| /linux-5.19.10/drivers/hwtracing/coresight/ ! |
| D | coresight-tmc-etf.c | 176 if (drvdata->reading) { in tmc_enable_etf_sink_sysfs()
237 if (drvdata->reading) in tmc_enable_etf_sink_perf()
314 if (drvdata->reading) { in tmc_disable_etf_sink()
346 if (drvdata->reading) { in tmc_enable_etf_link()
375 if (drvdata->reading) { in tmc_disable_etf_link()
602 if (drvdata->reading) { in tmc_read_prepare_etb()
630 drvdata->reading = true; in tmc_read_prepare_etb()
677 drvdata->reading = false; in tmc_read_unprepare_etb()
|
| /linux-5.19.10/Documentation/hwmon/ ! |
| D | ina209.rst | 41 in0_input_highest shunt voltage historical maximum reading (mV)
42 in0_input_lowest shunt voltage historical minimum reading (mV)
54 in1_input_highest bus voltage historical maximum reading (mV)
55 in1_input_lowest bus voltage historical minimum reading (mV)
67 power1_input_highest power historical maximum reading (uW)
|
| D | abituguru-datasheet.rst | 10 Winbond (W83L950D). And no, reading the manual for this specific uC or
46 hold 0x09 and will only hold 0x08 after reading CMD first, so CMD must be read
64 that many bytes, reading / writing more will fail, the results when writing
77 when reading you should always use the read address and when writing the
94 After reading CMD, DATA should hold 0x08 which means that the uGuru is ready
197 This byte holds the reading from the sensor. Sensors in Bank1 can be both
202 Volt sensors use a linear scale, a reading 0 corresponds with 0 volt and a
203 reading of 255 with 3494 mV. The sensors for higher voltages however are
208 Temp sensors also use a linear scale, a reading of 0 corresponds with 0 degree
209 Celsius and a reading of 255 with a reading of 255 degrees Celsius.
[all …]
|
| D | adm1025.rst | 46 input, or as the a fifth digital entry for the VID reading (bit 4). It's
52 properly, you'll have a wrong +12V reading or a wrong VID reading. The way
|
| D | mp2975.rst | 44 Device supports direct format for reading output current, output voltage,
46 Device supports linear format for reading input voltage and input power.
47 Device supports VID and direct formats for reading output voltage.
|
| D | gl518sm.rst | 36 0x80 chips support the reading of all voltages and revision 0x00 only
65 reading the current voltage of any input except for VIN3; limit setting and
79 The GL518SM only updates its values each 1.5 seconds; reading it more often
|
| /linux-5.19.10/Documentation/ABI/obsolete/ ! |
| D | sysfs-driver-hid-roccat-ryos | 27 Before reading this file, control has to be written to select
37 Before reading this file, control has to be written to select
47 Before reading this file, control has to be written to select
57 Before reading this file, control has to be written to select
67 Before reading this file, control has to be written to select
77 Before reading this file, control has to be written to select
88 Before reading this file, control has to be written to select
99 Before reading this file, control has to be written to select
110 Before reading this file, control has to be written to select
156 Before reading this file, control has to be written to select
[all …]
|
| D | sysfs-driver-hid-roccat-isku | 27 Before reading this file, control has to be written to select
37 Before reading this file, control has to be written to select
47 Before reading this file, control has to be written to select
57 Before reading this file, control has to be written to select
67 Before reading this file, control has to be written to select
77 Before reading this file, control has to be written to select
87 Before reading this file, control has to be written to select
106 Before reading this file, control has to be written to select
117 Before reading this file, control has to be written to select
|
| /linux-5.19.10/drivers/scsi/qedf/ ! |
| D | qedf_attr.c | 132 long reading; in qedf_sysfs_write_grcdump() local
144 ret = kstrtol(buf, 10, &reading); in qedf_sysfs_write_grcdump()
150 switch (reading) { in qedf_sysfs_write_grcdump()
|
| /linux-5.19.10/Documentation/w1/ ! |
| D | w1-generic.rst | 42 2. reading. This will issue reading eeprom response.
61 provides temperature reading function which is bound to ->rbin() method
65 - driver for simple 64bit memory cell provides ID reading method.
67 You can call above methods by reading appropriate sysfs files.
|
| /linux-5.19.10/drivers/usb/misc/ ! |
| D | chaoskey.c | 81 bool reading; /* ongoing IO */ member
332 dev->reading = false; in chaos_read_callback()
367 dev->reading = true; in _chaoskey_fill()
371 dev->reading = false; in _chaoskey_fill()
384 !dev->reading, in _chaoskey_fill()
|
| /linux-5.19.10/Documentation/admin-guide/mm/damon/ ! |
| D | usage.rst | 20 features by reading from and writing to special sysfs files. Therefore,
46 ``<sysfs>/kernel/mm/damon/``. You can control DAMON by writing to and reading
130 If the state is ``on``, reading ``pid`` shows the pid of the kdamond thread.
153 available monitoring operations set on the currently running kernel by reading
167 reading from the ``operations`` file.
180 writing to and reading from the files.
236 region by writing to and reading from the files, respectively.
245 can get and set the schemes by reading from and writing to files under this
280 to and reading from the ``min`` and ``max`` files under ``sz``,
342 The statistics can be retrieved by reading the files under ``stats`` directory
[all …]
|
| /linux-5.19.10/drivers/media/v4l2-core/ ! |
| D | videobuf-core.c | 195 if (q->reading) { in videobuf_queue_is_busy()
238 if (q->streaming || q->reading) { in __videobuf_free()
269 q->reading = 0; in videobuf_queue_cancel()
542 if (q->reading) { in videobuf_qbuf()
743 if (q->reading) in videobuf_streamon()
992 q->reading = 1; in __videobuf_read_start()
1039 if (q->reading) in videobuf_stop()
1060 if (!q->reading) { in videobuf_read_stream()
1133 if (!q->reading) in videobuf_poll_stream()
1135 if (!q->reading) { in videobuf_poll_stream()
|
| /linux-5.19.10/block/ ! |
| D | blk-map.c | 428 unsigned int len, gfp_t gfp_mask, int reading) in bio_copy_kern() argument
460 if (!reading) in bio_copy_kern()
470 if (reading) { in bio_copy_kern()
637 int reading = rq_data_dir(rq) == READ; in blk_rq_map_kern() local
649 bio = bio_copy_kern(q, kbuf, len, gfp_mask, reading); in blk_rq_map_kern()
|
| /linux-5.19.10/Documentation/devicetree/bindings/timer/ ! |
| D | arm,arch_timer.yaml | 75 where reading certain values from the counter is unreliable. This also
81 that reading the counter is unreliable unless the same value is returned
88 says that reading the counters is unreliable in some cases, and reads may
|
| /linux-5.19.10/drivers/soc/fsl/ ! |
| D | Kconfig | 19 Initially only reading SVR and registering soc device are supported.
20 Other guts accesses, such as reading RCW, should eventually be moved
|