| /linux-5.19.10/Documentation/devicetree/bindings/clock/ |
| D | brcm,iproc-clocks.yaml | 16 LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
20 reference clock of the onboard crystal.
60 most iProc PLLs, this is an onboard crystal with a fixed rate.
109 crystal N/A N/A N/A
111 armpll crystal N/A N/A
113 keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK
114 adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK
115 pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK
117 genpll crystal 0 BCM_CYGNUS_GENPLL
125 lcpll0 crystal 0 BCM_CYGNUS_LCPLL0
[all …]
|
| D | renesas,r9a06g032-sysctrl.yaml | 23 - description: External 40 MHz crystal
24 - description: Optional external 32.768 kHz crystal
|
| D | vf610-clock.txt | 16 - sxosc (external crystal oscillator 32KHz, recommended)
17 - fxosc (external crystal oscillator 24MHz, recommended)
|
| D | samsung,s5pv210-clock.yaml | 18 - "xxti" - external crystal oscillator connected to XXTI and XXTO pins of
20 - "xusbxti" - external crystal oscillator connected to XUSBXTI and XUSBXTO
|
| D | rockchip,rk3188-cru.yaml | 25 - "xin24m" - crystal input - required
27 - "xin27m" - 27mhz crystal input on RK3066 - optional
|
| D | idt,versaclock5.yaml | 138 # Devices with builtin crystal + optional external input
145 # Devices without builtin crystal
156 /* 25MHz reference crystal */
|
| /linux-5.19.10/arch/powerpc/boot/ |
| D | mpc8xx.c | 20 u32 mpc885_get_clock(u32 crystal) in mpc885_get_clock() argument
46 ret = crystal * mfi; in mpc885_get_clock()
49 ret += crystal * mfn / (mfd + 1); in mpc885_get_clock()
70 int mpc885_fixup_clocks(u32 crystal) in mpc885_fixup_clocks() argument
72 u32 sysclk = mpc885_get_clock(crystal); in mpc885_fixup_clocks()
|
| D | pq2.c | 28 int pq2_get_clocks(u32 crystal, u32 *sysfreq, u32 *corefreq, in pq2_get_clocks() argument
50 mainclk = crystal * (pllmf + 1) / (plldf + 1); in pq2_get_clocks()
90 int pq2_fixup_clocks(u32 crystal) in pq2_fixup_clocks() argument
94 if (!pq2_get_clocks(crystal, &sysfreq, &corefreq, &timebase, &brgfreq)) in pq2_fixup_clocks()
|
| D | mpc8xx.h | 9 u32 mpc885_get_clock(u32 crystal);
10 int mpc885_fixup_clocks(u32 crystal);
|
| D | pq2.h | 7 int pq2_get_clocks(u32 crystal, u32 *sysfreq, u32 *corefreq,
10 int pq2_fixup_clocks(u32 crystal);
|
| /linux-5.19.10/drivers/gpu/drm/nouveau/nvkm/subdev/clk/ |
| D | pllnv04.c | 48 int crystal = info->refclk; in getMNP_single() local
93 if (crystal/M < minU) in getMNP_single()
95 if (crystal/M > maxU) in getMNP_single()
99 N = (clkP * M + crystal/2) / crystal; in getMNP_single()
107 calcclk = ((N * crystal + P/2) / P + M/2) / M; in getMNP_single()
149 int crystal = info->refclk; in getMNP_double() local
165 if (crystal/M1 < minU1) in getMNP_double()
167 if (crystal/M1 > maxU1) in getMNP_double()
171 calcclk1 = crystal * N1 / M1; in getMNP_double()
|
| D | gt215.c | 50 return device->crystal; in read_vco()
73 return device->crystal; in read_clk()
88 return device->crystal; in read_clk()
152 return device->crystal; in gt215_clk_read()
|
| /linux-5.19.10/Documentation/devicetree/bindings/rtc/ |
| D | stmp3xxx-rtc.txt | 11 - stmp,crystal-freq: override crystal frequency as determined from fuse bits.
13 "no crystal".
|
| /linux-5.19.10/drivers/tty/serial/ |
| D | max3100.c | 116 int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */ member
439 if (s->crystal) in max3100_set_termios()
445 param_new = 14 + s->crystal; in max3100_set_termios()
448 param_new = 13 + s->crystal; in max3100_set_termios()
451 param_new = 12 + s->crystal; in max3100_set_termios()
454 param_new = 11 + s->crystal; in max3100_set_termios()
457 param_new = 10 + s->crystal; in max3100_set_termios()
460 param_new = 9 + s->crystal; in max3100_set_termios()
463 param_new = 8 + s->crystal; in max3100_set_termios()
466 param_new = 1 + s->crystal; in max3100_set_termios()
[all …]
|
| /linux-5.19.10/Documentation/devicetree/bindings/mips/cavium/ |
| D | uctl.txt | 20 either "crystal" or "external".
31 /* Either "crystal" or "external" */
32 refclk-type = "crystal";
|
| /linux-5.19.10/drivers/gpu/drm/nouveau/nvkm/subdev/therm/ |
| D | gf119.c | 114 return (device->crystal * 1000) / 20; in gf119_fan_pwm_clock()
116 return device->crystal * 1000 / 10; in gf119_fan_pwm_clock()
130 nvkm_wr32(device, 0x00e724, device->crystal * 1000); in gf119_therm_init()
|
| D | nv50.c | 110 pwm_clock = (device->crystal * 1000) >> pwm_div; in nv50_fan_pwm_clock()
114 pwm_clock = (device->crystal * 1000) / 20; in nv50_fan_pwm_clock()
|
| D | gt215.c | 50 nvkm_wr32(device, 0x00e724, device->crystal * 1000); in gt215_therm_init()
|
| D | gm107.c | 54 return therm->subdev.device->crystal * 1000; in gm107_fan_pwm_clock()
|
| /linux-5.19.10/Documentation/devicetree/bindings/net/wireless/ |
| D | esp,esp8089.yaml | 19 esp,crystal-26M-en:
39 esp,crystal-26M-en = <2>;
|
| /linux-5.19.10/Documentation/devicetree/bindings/usb/ |
| D | octeon-usb.txt | 25 "crystal" or "external".
54 cavium,refclk-type = "crystal";
|
| /linux-5.19.10/Documentation/devicetree/bindings/sound/ |
| D | cs43130.txt | 20 When external MCLK is generated by external crystal
22 for external crystal. Amount of bias current sent is
|
| /linux-5.19.10/include/linux/ |
| D | serial_max3100.h | 43 int crystal; member
|
| /linux-5.19.10/arch/mips/boot/dts/cavium-octeon/ |
| D | octeon_3xxx.dts | 364 /* Either "crystal" or "external" */
365 refclk-type = "crystal";
384 /* Either "crystal" or "external" */
385 refclk-type = "crystal";
|
| D | dlink_dsr-500n-1000n.dtsi | 48 refclk-type = "crystal";
|