| /linux-5.19.10/drivers/isdn/hardware/mISDN/ |
| D | Kconfig | 8 tristate "Support for HFC PCI cards"
12 Enable support for cards with Cologne Chip AG's
16 tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"
20 Enable support for cards with Cologne Chip AG's HFC multiport
49 Enable support for AVMs FRITZ!CARD PCI cards
61 tristate "Support for cards with Infineon chipset"
66 Enable support for cards with ISAC + HSCX, IPAC or IPAC-SX
70 tristate "Support for cards with Winbond 6692"
74 Enable support for Winbond 6692 PCI chip based cards.
77 tristate "Support for NETJet cards"
[all …]
|
| /linux-5.19.10/drivers/media/pci/bt8xx/ |
| D | Kconfig | 26 tristate "DVB/ATSC Support for bt878 based TV cards"
37 Support for PCI cards based on the Bt8xx PCI bridge. Examples are
38 the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
39 the pcHDTV HD2000 cards, the DViCO FusionHDTV Lite cards, and
40 some AVerMedia cards.
42 Since these cards have no MPEG decoder onboard, they transmit
|
| /linux-5.19.10/drivers/media/pci/ttpci/ |
| D | Kconfig | 3 tristate "SAA7146 DVB cards (aka Budget, Nova-PCI)"
8 Support for simple SAA7146 based DVB cards
9 (so called Budget- or Nova-PCI cards) without onboard
13 tristate "Budget cards"
29 Support for simple SAA7146 based DVB cards (so called Budget-
30 or Nova-PCI cards) without onboard MPEG2 decoder, and without
39 tristate "Budget cards with onboard CI connector"
53 Support for simple SAA7146 based DVB cards
54 (so called Budget- or Nova-PCI cards) without onboard
66 tristate "Budget cards with analog video inputs"
[all …]
|
| /linux-5.19.10/drivers/net/can/softing/ |
| D | Kconfig | 6 Support for CAN cards from Softing Gmbh & some cards
8 Softing Gmbh CAN cards come with 1 or 2 physical buses.
9 Those cards typically use Dual Port RAM to communicate
11 and PCMCIA cards. This driver operates on a platform device,
20 tristate "Softing Gmbh CAN pcmcia cards"
24 Support for PCMCIA cards from Softing Gmbh & some cards
|
| /linux-5.19.10/drivers/net/wireless/atmel/ |
| D | Kconfig | 10 questions about these cards. If you say Y, you will be asked for
23 A driver 802.11b wireless cards based on the Atmel fast-vnet
26 Many cards based on this chipset do not have flash memory
34 tristate "Atmel at76c506 PCI cards"
37 Enable support for PCI and mini-PCI cards containing the
41 tristate "Atmel at76c502/at76c504 PCMCIA cards"
47 Enable support for PCMCIA cards containing the
51 tristate "Atmel at76c503/at76c505/at76c505a USB cards"
|
| /linux-5.19.10/drivers/net/wireless/intersil/orinoco/ |
| D | Kconfig | 14 A driver for 802.11b wireless cards based on the "Hermes" or
16 majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
17 - except for the Cisco/Aironet cards. Cards supported include the
26 Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
68 the BCM43xx driver for Airport Extreme cards.
74 Enable support for PCMCIA cards supported by the "Hermes" (aka
78 802.11b PCMCIA cards can be used in desktop machines. The Netgear
85 Enable support for PCMCIA cards supported by the "Hermes" (aka
89 802.11b PCMCIA cards can be used in desktop machines.
95 Enable support for PCMCIA cards supported by the "Hermes" (aka
[all …]
|
| /linux-5.19.10/Documentation/networking/device_drivers/appletalk/ |
| D | cops.rst | 11 that there are 2 main types of cards and all other cards are
14 become more clear exactly what cards are supported.
16 Right now these cards are known to work with the COPS driver. The
17 LT-200 cards work in a somewhat more limited capacity than the
18 DL200 cards, which work very well and are in use by many people.
27 Other cards possibly supported mode unknown though:
41 To load multiple COPS driver Localtalk cards you can do one of the following::
69 * For multiple cards, Ethernet and LocalTalk::
74 * For multiple LocalTalk cards, and an Ethernet card.
|
| /linux-5.19.10/Documentation/admin-guide/media/ |
| D | pci-cardlist.rst | 50 The current supported PCI/PCIe cards (not including staging drivers) are
60 bt878 DVB/ATSC Support for bt878 based TV cards
68 dm1105 SDMC DM1105 based PCI cards
70 dvb-ttpci AV7110 cards
71 earth-pt1 PT1 cards
72 earth-pt3 Earthsoft PT3 cards
75 hopper HOPPER based cards
79 mantis MANTIS based cards
84 pluto2 Pluto2 cards
87 smipcie SMI PCIe DVBSky cards
[all …]
|
| D | bt8xx.rst | 4 How to get the bt8xx cards working
18 This class of cards has a bt878a as the PCI interface, and require the bttv
41 cards, you should also do::
74 - Old TV cards without EEPROMs, sharing a common PCI subsystem ID;
75 - Old TwinHan DST cards or clones with or without CA slot and not
104 The autodetected values are determined by the cards' "response string".
111 Running multiple cards
132 When you have multiple cards, the order of the card ID should
134 that removing/inserting other PCI cards may change the detection
144 Probing the cards with broken PCI subsystem ID
[all …]
|
| /linux-5.19.10/drivers/net/wireless/cisco/ |
| D | Kconfig | 10 questions about these cards. If you say Y, you will be asked for
16 tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
25 PCI 802.11 wireless cards.
26 It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
37 tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
47 802.11 wireless cards. This driver is the same as the Aironet
49 It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
53 802.11b cards.
|
| /linux-5.19.10/drivers/pcmcia/ |
| D | Kconfig | 10 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
11 computer. These are credit-card size devices such as network cards,
13 actually two varieties of these cards: 16 bit PCMCIA and 32 bit
14 CardBus cards.
26 This option enables support for 16-bit PCMCIA cards. Most older
27 PC-cards are such 16-bit PCMCIA cards, so unless you know you're
28 only using 32-bit CardBus cards, say Y or M here.
30 To use 16-bit PCMCIA cards, you will need supporting software in
45 Some PCMCIA cards require an updated Card Information Structure (CIS)
58 CardBus is a bus mastering architecture for PC-cards, which allows
[all …]
|
| /linux-5.19.10/Documentation/sound/ |
| D | alsa-configuration.rst | 16 If you want to support the WaveTable functionality on cards such as
22 too. "Debug detection" will add checks for the detection of cards.
25 (if the card supports ISA PnP). You don't need to configure the cards
134 Default: enabled, for PCI and ISA PnP cards
139 Module for AdLib FM cards.
144 This module supports multiple cards. It does not support autoprobe, so
145 the port must be specified. For actual AdLib FM cards it will be 0x388.
173 Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips.
178 This module supports multiple cards, autoprobe and PnP.
183 Module for sound cards based on AD1848/AD1847/CS4248 ISA chips.
[all …]
|
| /linux-5.19.10/drivers/media/pci/mantis/ |
| D | Kconfig | 7 Support for PCI cards based on the Mantis and Hopper PCi bridge.
12 tristate "MANTIS based cards"
25 Support for PCI cards based on the Mantis PCI bridge.
31 tristate "HOPPER based cards"
36 Support for PCI cards based on the Hopper PCI bridge.
|
| /linux-5.19.10/arch/m68k/ |
| D | Kconfig.bus | 25 expansion cards in your Amiga that conform to the Amiga
27 expansion cards that do not fit in the Zorro slots but fit in e.g.
36 600. If you intend to use pcmcia cards say Y; otherwise say N.
54 operate ISA cards on Atari. Only 8 bit cards are supported, and
57 driver for RTL8019AS based NE2000 compatible network cards.
|
| /linux-5.19.10/drivers/net/wireless/marvell/libertas/ |
| D | Kconfig | 13 tristate "Marvell Libertas 8388 USB 802.11b/g cards"
19 tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
25 tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
31 tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
|
| /linux-5.19.10/drivers/net/ethernet/dec/tulip/ |
| D | Kconfig | 10 This selects the "Tulip" family of EISA/PCI network cards.
20 cards and also works with cards based on the DECchip
21 21040 (Tulip series) chips. Some LinkSys PCI cards are
24 cards, below. However, most people with a network card of this type
48 cards and also works with cards based on the DECchip
49 21140 (Tulip series) chips. Some LinkSys PCI cards are
52 cards, above. However, most people with a network card of this type
123 This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
|
| /linux-5.19.10/drivers/media/pci/cx88/ |
| D | Kconfig | 12 TV cards.
23 Conexant 2388x based TV cards using ALSA.
38 This adds support for MPEG encoder cards based on the
46 tristate "DVB/ATSC Support for cx2388x based TV cards"
69 This adds support for DVB/ATSC cards based on the
80 This adds DVB-T support for cards based on the
|
| /linux-5.19.10/drivers/media/pci/saa7134/ |
| D | Kconfig | 13 TV cards.
24 Philips SAA713x based TV cards using ALSA
39 tristate "DVB/ATSC Support for saa7134 based TV cards"
62 This adds support for DVB cards based on the
69 tristate "go7007 support for saa7134 based TV cards"
|
| /linux-5.19.10/drivers/media/pci/pt1/ |
| D | Kconfig | 3 tristate "PT1 cards"
9 Support for Earthsoft PT1 PCI cards.
11 Since these cards have no MPEG decoder onboard, they transmit
|
| /linux-5.19.10/drivers/net/ethernet/8390/ |
| D | Kconfig | 15 the questions about National Semiconductor 8390 cards. If you say Y,
25 (PC-card) Fast Ethernet card to your computer. These cards are
77 If you have an Acorn system with one of these network cards, you
81 tristate "Macintosh NS 8390 based ethernet cards"
86 Ethernet cards using an NS8390 chipset or its equivalent, say Y.
109 Many Ethernet cards without a specific driver are compatible with
123 This driver is for NE2000 compatible PCI cards. It will not work
124 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
128 This driver also works for the following NE2000 clone cards:
163 Support for cards based on the National Semiconductor DP83902AV
[all …]
|
| /linux-5.19.10/sound/drivers/ |
| D | virmidi.c | 133 int i, cards, err; in alsa_card_virmidi_init() local
139 cards = 0; in alsa_card_virmidi_init()
154 cards++; in alsa_card_virmidi_init()
156 if (!cards) { in alsa_card_virmidi_init()
|
| /linux-5.19.10/drivers/net/wireless/admtek/ |
| D | Kconfig | 10 questions about these cards. If you say Y, you will be asked for
21 This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
22 These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
36 However, some of these cards have been replaced with other chips
|
| /linux-5.19.10/drivers/media/pci/pluto2/ |
| D | Kconfig | 3 tristate "Pluto2 cards"
8 Support for PCI cards based on the Pluto2 FPGA like the Satelco
11 Since these cards have no MPEG decoder onboard, they transmit
|
| /linux-5.19.10/drivers/media/pci/solo6x10/ |
| D | Kconfig | 3 tristate "Bluecherry / Softlogic 6x10 capture cards (MPEG-4/H.264)"
14 compression capture cards and other Softlogic-based ones.
16 Following cards have been tested:
|
| /linux-5.19.10/Documentation/sound/cards/ |
| D | bt87x.rst | 8 You might have noticed that the bt878 grabber cards have actually
21 playback). As most TV cards come with a short cable which can be plugged
25 Some cards do not bother to connect anything to the audio input pins of
26 the chip, and some other cards use the audio function to transport MPEG
34 The driver is now stable. However, it doesn't know about many TV cards,
35 and it refuses to load for cards it doesn't know.
|