/linux-5.19.10/arch/arm/include/debug/ |
D | palmchip.S | 6 #undef UART_MSR 10 #define UART_MSR 8 macro
|
D | 8250.S | 52 1001: load \rd, [\rx, #UART_MSR << UART_SHIFT]
|
D | tegra.S | 211 1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
|
/linux-5.19.10/drivers/media/rc/ |
D | serial_ir.c | 336 status = sinp(UART_MSR); in serial_ir_irq_handler() 432 sinp(UART_MSR); in hardware_init_port() 441 sinp(UART_MSR); in hardware_init_port() 582 if (sinp(UART_MSR) & hardware[type].signal_pin) in serial_ir_probe() 699 sinp(UART_MSR); in serial_ir_suspend()
|
/linux-5.19.10/arch/powerpc/boot/ |
D | ns16550.c | 28 #define UART_MSR 6 /* In: Modem Status Register */ macro
|
/linux-5.19.10/drivers/accessibility/speakup/ |
D | serialio.c | 149 inb(speakup_info.port_tts + UART_MSR); in start_serial_interrupt() 242 while (!((inb_p(speakup_info.port_tts + UART_MSR)) & UART_MSR_CTS)) { in spk_serial_wait_for_xmitr()
|
/linux-5.19.10/drivers/tty/serial/ |
D | vr41xx_siu.c | 209 msr = siu_read(port, UART_MSR); in siu_get_mctrl() 358 msr = siu_read(port, UART_MSR); in check_modem_status() 442 (void)siu_read(port, UART_MSR); in siu_startup() 465 (void)siu_read(port, UART_MSR); in siu_startup() 726 msr = siu_read(port, UART_MSR); in wait_for_xmitr()
|
D | pxa.c | 222 status = serial_in(up, UART_MSR); in check_modem_status() 280 status = serial_in(up, UART_MSR); in serial_pxa_get_mctrl() 364 (void) serial_in(up, UART_MSR); in serial_pxa_startup() 390 (void) serial_in(up, UART_MSR); in serial_pxa_startup() 603 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) in wait_for_xmitr()
|
D | sunsu.c | 437 status = serial_in(up, UART_MSR); in check_modem_status() 563 status = serial_in(up, UART_MSR); in sunsu_get_mctrl() 657 (void) serial_inp(up, UART_MSR); in sunsu_startup() 718 (void) serial_inp(up, UART_MSR); in sunsu_startup() 1084 status1 = serial_inp(up, UART_MSR) & 0xF0; in sunsu_autoconfig() 1277 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) in wait_for_xmitr()
|
D | serial-tegra.c | 815 msr = tegra_uart_read(tup, UART_MSR); in tegra_uart_handle_modem_signal_change() 950 msr = tegra_uart_read(tup, UART_MSR); in tegra_uart_hw_deinit() 962 msr = tegra_uart_read(tup, UART_MSR); in tegra_uart_hw_deinit()
|
D | omap-serial.c | 439 status = serial_in(up, UART_MSR); in check_modem_status() 725 (void) serial_in(up, UART_MSR); in serial_omap_startup() 1127 unsigned int msr = serial_in(up, UART_MSR); in wait_for_xmitr()
|
D | pch_uart.c | 326 "MSR: \t0x%02x\n", ioread8(priv->membase + UART_MSR)); in port_show_regs() 548 unsigned int msr = ioread8(priv->membase + UART_MSR); in pch_uart_hal_get_modem() 1468 unsigned int msr = ioread8(up->membase + UART_MSR); in wait_for_xmitr()
|
/linux-5.19.10/arch/sh/include/asm/ |
D | smc37c93x.h | 65 #define UART_MSR 0xc /* MODEM Status Register */ macro
|
/linux-5.19.10/arch/powerpc/platforms/embedded6xx/ |
D | ls_uart.c | 107 (void) in_8(avr_addr + UART_MSR); in ls_uart_init()
|
/linux-5.19.10/drivers/bluetooth/ |
D | dtl1_cs.c | 340 msr = inb(iobase + UART_MSR); in dtl1_interrupt() 481 info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR) in dtl1_open()
|
/linux-5.19.10/drivers/tty/serial/8250/ |
D | 8250_em.c | 56 case UART_MSR: /* MSR @ 0x1c (+1) */ in serial8250_em_serial_in()
|
D | 8250_port.c | 1268 status1 = serial_in(up, UART_MSR) & 0xF0; in autoconfig() 1401 serial_in(up, UART_MSR); in autoconfig_irq() 1876 unsigned int status = serial_in(up, UART_MSR); in serial8250_modem_status() 2105 unsigned int msr = serial_in(up, UART_MSR); in wait_for_xmitr() 2250 serial_port_in(port, UART_MSR); in serial8250_do_startup() 2412 serial_port_in(port, UART_MSR); in serial8250_do_startup()
|
/linux-5.19.10/include/uapi/linux/ |
D | serial_reg.h | 144 #define UART_MSR 6 /* In: Modem Status Register */ macro
|
/linux-5.19.10/sound/drivers/ |
D | serial-u16550.c | 243 status = inb(uart->base + UART_MSR); in snd_uart16550_io_loop() 247 status = inb(uart->base + UART_MSR); in snd_uart16550_io_loop() 603 && (inb(uart->base + UART_MSR) & UART_MSR_CTS)))) { /* CTS? */ in snd_uart16550_output_byte()
|
/linux-5.19.10/drivers/tty/ |
D | mxser.c | 464 return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; in mxser_carrier_raised() 634 inb(info->ioaddr + UART_MSR)); in mxser_change_speed() 687 u8 msr = inb(port->ioaddr + UART_MSR); in mxser_check_modem_status() 771 (void) inb(info->ioaddr + UART_MSR); in mxser_activate() 795 (void) inb(info->ioaddr + UART_MSR); in mxser_activate() 1617 inb(port->ioaddr + UART_MSR); in mxser_port_isr()
|
/linux-5.19.10/drivers/ssb/ |
D | driver_extif.c | 48 msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI in serial_exists()
|
/linux-5.19.10/arch/powerpc/kernel/ |
D | udbg_16550.c | 23 #define UART_MSR 6 macro
|
/linux-5.19.10/drivers/mmc/core/ |
D | sdio_uart.c | 200 status = sdio_in(port, UART_MSR); in sdio_uart_get_mctrl() 455 status = sdio_in(port, UART_MSR); in sdio_uart_check_modem_status() 620 (void) sdio_in(port, UART_MSR); in sdio_uart_activate()
|
/linux-5.19.10/drivers/usb/serial/ |
D | ssu100.c | 363 r = ssu100_getregister(dev, 0, UART_MSR, d+1); in ssu100_tiocmget()
|
D | ark3116.c | 334 result = ark3116_read_reg(serial, UART_MSR, buf); in ark3116_open()
|