Searched refs:SCSI (Results 1 – 25 of 178) sorted by relevance
12345678
4 SCSI Kernel Parameters19 advansys= [HW,SCSI]22 aha152x= [HW,SCSI]25 aha1542= [HW,SCSI]28 aic7xxx= [HW,SCSI]31 aic79xx= [HW,SCSI]34 atascsi= [HW,SCSI]37 BusLogic= [HW,SCSI]41 gvp11= [HW,SCSI]43 ips= [HW,SCSI] Adaptec / IBM ServeRAID controller[all …]
20 2. Supported chips and SCSI features22 3.1 Optimized SCSI SCRIPTS46 10.2.6 Check SCSI BUS47 10.2.7 Suggest a default SCSI id for hosts54 10.4 SCSI BUS checking boot option55 11. SCSI problem troubleshooting67 This driver supports the whole SYM53C8XX family of PCI-SCSI controllers.68 It also support the subset of LSI53C10XX PCI-SCSI controllers that are based115 SCSI standard documentations are available at T10 site:119 Useful SCSI tools written by Eric Youngdale are part of most Linux[all …]
18 2. Supported chips and SCSI features20 3.1 Optimized SCSI SCRIPTS21 3.2 New features of the SYM53C896 (64 bit PCI dual LVD SCSI controller)45 10.2.5 Ultra SCSI support59 10.2.19 Check SCSI BUS61 10.2.21 Suggest a default SCSI id for hosts66 10.6 SCSI BUS checking boot option74 14.3 Using only 8 bit devices with a WIDE SCSI controller.77 15. SCSI problem troubleshooting81 16.1 Synchronous timings for 53C875 and 53C860 Ultra-SCSI controllers[all …]
4 BusLogic MultiMaster and FlashPoint SCSI Driver for Linux27 BusLogic, Inc. designed and manufactured a variety of high performance SCSI48 to achieve the full performance that BusLogic SCSI Host Adapters and modern49 SCSI peripherals are capable of, and to provide a highly robust driver that can55 The latest information on Linux support for BusLogic SCSI Host Adapters, as62 driver and SCSI subsystem at startup, along with any subsequent system messages63 relevant to SCSI operations, and a detailed description of your system's69 the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide70 Ultra SCSI Host Adapter in January 1996. This was mutually beneficial since86 "Mylex SCSI host adapters are compatible with all major operating systems[all …]
19 3.4 SCSI Error handling53 UFS has a layered communication architecture which is based on SCSI63 protocol agnostic, however SCSI has been selected as a baseline66 UFS supports a subset of SCSI commands defined by SPC-4 and SBC-3.69 It handles SCSI commands supported by UFS specification.113 The UFS host controller driver is based on the Linux SCSI Framework.115 the SCSI Midlayer and PCIe-based UFS host controllers.129 Transfer request handling module of UFSHCD receives SCSI commands130 from the SCSI Midlayer, forms UPIUs and issues the UPIUs to the UFS Host132 host controller in the form of UPIUs and intimates the SCSI Midlayer[all …]
4 SCSI mid_level - lower_level driver interface9 This document outlines the interface between the Linux SCSI mid level and10 SCSI lower level drivers. Lower level drivers (LLDs) are variously called13 single SCSI initiator port on a SCSI transport. An "initiator" port14 (SCSI terminology, see SAM-3 at http://www.t10.org) sends SCSI commands15 to "target" SCSI ports (e.g. disks). There can be many LLDs in a running17 SCSI HBAs. Some HBAs contain multiple hosts.19 In some cases the SCSI transport is an external bus that already has21 SCSI subsystem LLD is a software bridge to the other driver subsystem.26 For example, the aic7xxx LLD controls Adaptec SCSI parallel interface[all …]
21 :SCSI device: I-O data CDPS-PX24 (CD-ROM drive),51 Because the NinjaSCSI driver requires some SCSI header files in Linux 107 version "KME ", "SCSI-CARD-001", "1"110 version "KME ", "SCSI-CARD-002", "1"113 version "KME ", "SCSI-CARD-003", "1"116 version "KME ", "SCSI-CARD-004", "1"136 If you eject card when doing some operation for your SCSI device or suspend146 high level SCSI driver.156 - your SCSI device name(hard drive, CD-ROM, etc...)
4 SCSI subsystem documentation8 the SCSI subsystem in the Linux kernel (lk) 2.4 series. See:9 http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO . The LDP has single12 http://web.archive.org/web/%2E/http://www.torque.net/scsi/SCSI-2.4-HOWTO14 Notes on using modules in the SCSI subsystem27 the SCSI subsystem.41 aic7xxx.o driver is used to control all recent SCSI controller cards from
4 SCSI EH7 This document describes SCSI midlayer error handling infrastructure.9 information regarding SCSI midlayer.13 [1] How SCSI commands travel through the midlayer and to EH19 [2] How SCSI EH works25 [2-2-1] Pre transportt->eh_strategy_handler() SCSI midlayer conditions26 [2-2-2] Post transportt->eh_strategy_handler() SCSI midlayer conditions30 1. How SCSI commands travel through the midlayer and to EH36 Each SCSI command is represented with struct scsi_cmnd (== scmd). A136 4. Wakes up SCSI EH thread if shost->host_busy == shost->host_failed[all …]
4 The BusLogic FlashPoint SCSI Driver7 The BusLogic FlashPoint SCSI Host Adapters are now fully supported on Linux.14 BUSLOGIC FLASHPOINT LINE OF SCSI HOST ADAPTERS18 operating system support to its BusLogic brand of FlashPoint Ultra SCSI19 host adapters. All of BusLogic's other SCSI host adapters, including the42 The FlashPoint family of Ultra SCSI host adapters, designed for workstation45 automation technology, which minimizes SCSI command overhead and reduces56 BusLogic line of Ultra SCSI host adapter products, Mylex provides enabling87 drivers have been available for this new Ultra SCSI product. Despite its94 that all BusLogic SCSI Host Adapters were supported by Linux, only to[all …]
22 The following Adaptec SCSI Host Adapters are supported by this29 Ultra320 SCSI ASIC31 Ultra320 SCSI ASIC with Retained Training33 Ultra320 SCSI ASIC35 Ultra320 SCSI ASIC with Retained Training41 Adaptec SCSI Card 39320 Dual Channel 64-bit PCI-X 133MHz to 7902A4/7902B42 Ultra320 SCSI Card (one external44 Adaptec SCSI Card 39320A Dual Channel 64-bit PCI-X 133MHz to 7902B45 Ultra320 SCSI Card (one external47 Adaptec SCSI Card 39320D Dual Channel 64-bit PCI-X 133MHz to 7902A4[all …]
22 #define SCSI PCIMT_IRQ_SCSI macro46 { SCSI, SCSI, SCSI, SCSI, SCSI }, /* SCSI */63 { SCSI, SCSI, SCSI, SCSI, SCSI }, /* SCSI */75 { SCSI, SCSI, SCSI, SCSI, SCSI }, /* SCSI */80 #undef SCSI
16 0a00 [SCSI Host Adapter]22 1300 Warp Engine [Accelerator, SCSI Host Adapter and RAM Expansion]28 5400 A4091 [SCSI Host Adapter]31 0100 A2090/A2090A [SCSI Host Adapter]32 0200 A590/A2091 [SCSI Host Adapter]33 0300 A590/A2091 [SCSI Host Adapter]34 0400 A2090B 2090 Autoboot [SCSI Host Adapter]42 5400 A4091 [SCSI Host Adapter]49 0300 A2090/A2090A Combitec/MacroSystem [SCSI Host Adapter]57 0400 Kronos 2000 [SCSI Host Adapter][all …]
3 # SCSI driver configuration for Acorn6 tristate "Acorn SCSI card (aka30) support"7 depends on ARCH_ACORN && SCSI10 This enables support for the Acorn SCSI card (aka30). If you have an14 bool "Support SCSI 2 Synchronous Transfers"18 targets on the Acorn SCSI card.20 In general, this improves performance; however some SCSI devices24 tristate "ARXE SCSI support"25 depends on ARCH_ACORN && SCSI30 was either sold on its own or with an integral SCSI controller.[all …]
2 menu "SCSI device support"6 default y if SCSI=n || SCSI=y7 default m if SCSI=m20 config SCSI config21 tristate "SCSI device support"28 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or29 any other SCSI device under Linux, say Y and make sure that you know30 the name of your SCSI host adapter (the card inside your computer31 that "speaks" the SCSI protocol, also called SCSI controller),35 the SCSI protocol. Examples of this include the parallel port[all …]
2 SCSI Interfaces Guide19 Although the old parallel (fast/wide/ultra) SCSI bus has largely fallen20 out of use, the SCSI command set is more widely used than ever to23 The `SCSI protocol <http://www.t10.org/scsi-3.htm>`__ is a big-endian24 peer-to-peer packet based protocol. SCSI commands are 6, 10, 12, or 1627 SCSI commands can be transported over just about any kind of bus, and29 Fibre Channel, FireWire, and ATAPI devices. SCSI packets are also35 Design of the Linux SCSI subsystem38 The SCSI subsystem uses a three layer design, with upper, mid, and low39 layers. Every operation involving the SCSI subsystem (such as reading a[all …]
4 depends on PCI && SCSI10 depends on PCI && SCSI && MEGARAID_NEWGEN20 depends on PCI && SCSI && MEGARAID_MM41 LSI MegaRAID SCSI 320-0 1000:1960:1000:A52042 LSI MegaRAID SCSI 320-1 1000:1960:1000:052043 LSI MegaRAID SCSI 320-2 1000:1960:1000:051844 LSI MegaRAID SCSI 320-0X 1000:0407:1000:053045 LSI MegaRAID SCSI 320-2X 1000:0407:1000:053246 LSI MegaRAID SCSI 320-4X 1000:0407:1000:053147 LSI MegaRAID SCSI 320-1E 1000:0408:1000:0001[all …]
3 # SCSI Device Handler configuration7 bool "SCSI Device Handlers"8 depends on SCSI11 SCSI Device Handlers provide device specific support for17 depends on SCSI_DH && SCSI23 depends on SCSI_DH && SCSI31 depends on SCSI_DH && SCSI37 depends on SCSI_DH && SCSI39 SCSI Device handler for generic SPC-3 Asymmetric Logical Unit
3 pNFS SCSI layout server user guide6 This document describes support for pNFS SCSI layouts in the Linux NFS server.7 With pNFS SCSI layouts, the NFS server acts as Metadata Server (MDS) for pNFS,10 underlying SCSI LUNs that are shared with the client.12 To use pNFS SCSI layouts with the Linux NFS server, the exported file13 system needs to support the pNFS SCSI layouts (currently just XFS), and the14 file system must sit on a SCSI LUN that is accessible to the clients in19 On a server built with CONFIG_NFSD_SCSI, the pNFS SCSI volume support is21 option and the underlying SCSI device support persistent reservations.
3 # PCMCIA SCSI adapter configuration7 bool "PCMCIA SCSI adapter support"8 depends on SCSI!=n && PCMCIA!=n11 if SCSI_LOWLEVEL_PCMCIA && SCSI && PCMCIA && m17 Say Y here if you intend to attach this type of PCMCIA SCSI host27 Say Y here if you intend to attach this type of PCMCIA SCSI host37 If you intend to attach this type of PCMCIA SCSI host adapter to59 (version string: "KME ","SCSI-CARD-001","1")]70 Say Y here if you intend to attach this type of PCMCIA SCSI host80 SCSI adapter based on the Symbios 53c500 controller.
10 ABP0510 "Advansys ABP-510 ISA SCSI Host Adapter"11 ABP0540 "Advansys ABP-540/542 ISA SCSI Host Adapter"12 ABP7401 "AdvanSys ABP-740/742 EISA Single Channel SCSI Host Adapter"13 ABP7501 "AdvanSys ABP-750/752 EISA Dual Channel SCSI Host Adapter"51 ADP0000 "Adaptec AHA-1740 SCSI"52 ADP0001 "Adaptec AHA-1740A SCSI"53 ADP0002 "Adaptec AHA-1742A SCSI"54 ADP0100 "Adaptec AHA-1540/1542 ISA SCSI Host Adapter"56 ADP0200 "Adaptec AHA-1520/1522 ISA SCSI Host Adapter"57 ADP0400 "Adaptec AHA-1744 SCSI"[all …]
3 tristate "TCM Virtual SAS target and Linux/SCSI LDD fabric loopback module"4 depends on SCSI6 Say Y here to enable the TCM Virtual SAS target and Linux/SCSI LLD
2 The s390 SCSI dump tool (zfcpdump)6 dumps on SCSI disks. The dump process is initiated by booting a dump tool, which15 below 32 MB. zfcpdump is installed on a SCSI disk using zipl (as contained in17 system can then trigger a SCSI dump by booting the SCSI disk, where zfcpdump42 reads from /proc/vmcore or zcore/mem and writes the system dump to a SCSI disk.45 initramfs with a user space application that writes the dump to a SCSI
3 tristate "InfiniBand SCSI RDMA Protocol"4 depends on SCSI && INFINIBAND_ADDR_TRANS7 Support for the SCSI RDMA Protocol over InfiniBand. This
17 depends on PCI && SCSI20 SCSI HOST support for a parallel SCSI host adapters.32 depends on PCI && SCSI35 SCSI HOST support for a Fiber Channel host adapters.51 depends on PCI && SCSI54 SCSI HOST support for a SAS host adapters.