1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Copyright (C) ST Ericsson SA 2011
4  *
5  * STE Ux500 PRCMU API
6  */
7 #ifndef __MACH_PRCMU_H
8 #define __MACH_PRCMU_H
9 
10 #include <linux/interrupt.h>
11 #include <linux/notifier.h>
12 #include <linux/err.h>
13 
14 #include <dt-bindings/mfd/dbx500-prcmu.h> /* For clock identifiers */
15 
16 /* Offset for the firmware version within the TCPM */
17 #define DB8500_PRCMU_FW_VERSION_OFFSET 0xA4
18 #define DBX540_PRCMU_FW_VERSION_OFFSET 0xA8
19 
20 /* PRCMU Wakeup defines */
21 enum prcmu_wakeup_index {
22 	PRCMU_WAKEUP_INDEX_RTC,
23 	PRCMU_WAKEUP_INDEX_RTT0,
24 	PRCMU_WAKEUP_INDEX_RTT1,
25 	PRCMU_WAKEUP_INDEX_HSI0,
26 	PRCMU_WAKEUP_INDEX_HSI1,
27 	PRCMU_WAKEUP_INDEX_USB,
28 	PRCMU_WAKEUP_INDEX_ABB,
29 	PRCMU_WAKEUP_INDEX_ABB_FIFO,
30 	PRCMU_WAKEUP_INDEX_ARM,
31 	PRCMU_WAKEUP_INDEX_CD_IRQ,
32 	NUM_PRCMU_WAKEUP_INDICES
33 };
34 #define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
35 
36 /* EPOD (power domain) IDs */
37 
38 /*
39  * DB8500 EPODs
40  * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
41  * - EPOD_ID_SVAPIPE: power domain for SVA pipe
42  * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
43  * - EPOD_ID_SIAPIPE: power domain for SIA pipe
44  * - EPOD_ID_SGA: power domain for SGA
45  * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
46  * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
47  * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
48  * - NUM_EPOD_ID: number of power domains
49  *
50  * TODO: These should be prefixed.
51  */
52 #define EPOD_ID_SVAMMDSP	0
53 #define EPOD_ID_SVAPIPE		1
54 #define EPOD_ID_SIAMMDSP	2
55 #define EPOD_ID_SIAPIPE		3
56 #define EPOD_ID_SGA		4
57 #define EPOD_ID_B2R2_MCDE	5
58 #define EPOD_ID_ESRAM12		6
59 #define EPOD_ID_ESRAM34		7
60 #define NUM_EPOD_ID		8
61 
62 /*
63  * state definition for EPOD (power domain)
64  * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
65  * - EPOD_STATE_OFF: The EPOD is switched off
66  * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
67  *                         retention
68  * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
69  * - EPOD_STATE_ON: Same as above, but with clock enabled
70  */
71 #define EPOD_STATE_NO_CHANGE	0x00
72 #define EPOD_STATE_OFF		0x01
73 #define EPOD_STATE_RAMRET	0x02
74 #define EPOD_STATE_ON_CLK_OFF	0x03
75 #define EPOD_STATE_ON		0x04
76 
77 /*
78  * CLKOUT sources
79  */
80 #define PRCMU_CLKSRC_CLK38M		0x00
81 #define PRCMU_CLKSRC_ACLK		0x01
82 #define PRCMU_CLKSRC_SYSCLK		0x02
83 #define PRCMU_CLKSRC_LCDCLK		0x03
84 #define PRCMU_CLKSRC_SDMMCCLK		0x04
85 #define PRCMU_CLKSRC_TVCLK		0x05
86 #define PRCMU_CLKSRC_TIMCLK		0x06
87 #define PRCMU_CLKSRC_CLK009		0x07
88 /* These are only valid for CLKOUT1: */
89 #define PRCMU_CLKSRC_SIAMMDSPCLK	0x40
90 #define PRCMU_CLKSRC_I2CCLK		0x41
91 #define PRCMU_CLKSRC_MSP02CLK		0x42
92 #define PRCMU_CLKSRC_ARMPLL_OBSCLK	0x43
93 #define PRCMU_CLKSRC_HSIRXCLK		0x44
94 #define PRCMU_CLKSRC_HSITXCLK		0x45
95 #define PRCMU_CLKSRC_ARMCLKFIX		0x46
96 #define PRCMU_CLKSRC_HDMICLK		0x47
97 
98 /**
99  * enum prcmu_wdog_id - PRCMU watchdog IDs
100  * @PRCMU_WDOG_ALL: use all timers
101  * @PRCMU_WDOG_CPU1: use first CPU timer only
102  * @PRCMU_WDOG_CPU2: use second CPU timer conly
103  */
104 enum prcmu_wdog_id {
105 	PRCMU_WDOG_ALL = 0x00,
106 	PRCMU_WDOG_CPU1 = 0x01,
107 	PRCMU_WDOG_CPU2 = 0x02,
108 };
109 
110 /**
111  * enum ape_opp - APE OPP states definition
112  * @APE_OPP_INIT:
113  * @APE_NO_CHANGE: The APE operating point is unchanged
114  * @APE_100_OPP: The new APE operating point is ape100opp
115  * @APE_50_OPP: 50%
116  * @APE_50_PARTLY_25_OPP: 50%, except some clocks at 25%.
117  */
118 enum ape_opp {
119 	APE_OPP_INIT = 0x00,
120 	APE_NO_CHANGE = 0x01,
121 	APE_100_OPP = 0x02,
122 	APE_50_OPP = 0x03,
123 	APE_50_PARTLY_25_OPP = 0xFF,
124 };
125 
126 /**
127  * enum arm_opp - ARM OPP states definition
128  * @ARM_OPP_INIT:
129  * @ARM_NO_CHANGE: The ARM operating point is unchanged
130  * @ARM_100_OPP: The new ARM operating point is arm100opp
131  * @ARM_50_OPP: The new ARM operating point is arm50opp
132  * @ARM_MAX_OPP: Operating point is "max" (more than 100)
133  * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
134  * @ARM_EXTCLK: The new ARM operating point is armExtClk
135  */
136 enum arm_opp {
137 	ARM_OPP_INIT = 0x00,
138 	ARM_NO_CHANGE = 0x01,
139 	ARM_100_OPP = 0x02,
140 	ARM_50_OPP = 0x03,
141 	ARM_MAX_OPP = 0x04,
142 	ARM_MAX_FREQ100OPP = 0x05,
143 	ARM_EXTCLK = 0x07
144 };
145 
146 /**
147  * enum ddr_opp - DDR OPP states definition
148  * @DDR_100_OPP: The new DDR operating point is ddr100opp
149  * @DDR_50_OPP: The new DDR operating point is ddr50opp
150  * @DDR_25_OPP: The new DDR operating point is ddr25opp
151  */
152 enum ddr_opp {
153 	DDR_100_OPP = 0x00,
154 	DDR_50_OPP = 0x01,
155 	DDR_25_OPP = 0x02,
156 };
157 
158 /*
159  * Definitions for controlling ESRAM0 in deep sleep.
160  */
161 #define ESRAM0_DEEP_SLEEP_STATE_OFF 1
162 #define ESRAM0_DEEP_SLEEP_STATE_RET 2
163 
164 /**
165  * enum ddr_pwrst - DDR power states definition
166  * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
167  * @DDR_PWR_STATE_ON:
168  * @DDR_PWR_STATE_OFFLOWLAT:
169  * @DDR_PWR_STATE_OFFHIGHLAT:
170  */
171 enum ddr_pwrst {
172 	DDR_PWR_STATE_UNCHANGED     = 0x00,
173 	DDR_PWR_STATE_ON            = 0x01,
174 	DDR_PWR_STATE_OFFLOWLAT     = 0x02,
175 	DDR_PWR_STATE_OFFHIGHLAT    = 0x03
176 };
177 
178 #define DB8500_PRCMU_LEGACY_OFFSET		0xDD4
179 
180 #define PRCMU_FW_PROJECT_U8500		2
181 #define PRCMU_FW_PROJECT_U8400		3
182 #define PRCMU_FW_PROJECT_U9500		4 /* Customer specific */
183 #define PRCMU_FW_PROJECT_U8500_MBB	5
184 #define PRCMU_FW_PROJECT_U8500_C1	6
185 #define PRCMU_FW_PROJECT_U8500_C2	7
186 #define PRCMU_FW_PROJECT_U8500_C3	8
187 #define PRCMU_FW_PROJECT_U8500_C4	9
188 #define PRCMU_FW_PROJECT_U9500_MBL	10
189 #define PRCMU_FW_PROJECT_U8500_SSG1	11 /* Samsung specific */
190 #define PRCMU_FW_PROJECT_U8500_MBL2	12 /* Customer specific */
191 #define PRCMU_FW_PROJECT_U8520		13
192 #define PRCMU_FW_PROJECT_U8420		14
193 #define PRCMU_FW_PROJECT_U8500_SSG2	15 /* Samsung specific */
194 #define PRCMU_FW_PROJECT_U8420_SYSCLK	17
195 #define PRCMU_FW_PROJECT_A9420		20
196 /* [32..63] 9540 and derivatives */
197 #define PRCMU_FW_PROJECT_U9540		32
198 /* [64..95] 8540 and derivatives */
199 #define PRCMU_FW_PROJECT_L8540		64
200 /* [96..126] 8580 and derivatives */
201 #define PRCMU_FW_PROJECT_L8580		96
202 
203 #define PRCMU_FW_PROJECT_NAME_LEN	20
204 struct prcmu_fw_version {
205 	u32 project; /* Notice, project shifted with 8 on ux540 */
206 	u8 api_version;
207 	u8 func_version;
208 	u8 errata;
209 	char project_name[PRCMU_FW_PROJECT_NAME_LEN];
210 };
211 
212 #include <linux/mfd/db8500-prcmu.h>
213 
214 #if defined(CONFIG_UX500_SOC_DB8500)
215 
prcmu_early_init(void)216 static inline void prcmu_early_init(void)
217 {
218 	return db8500_prcmu_early_init();
219 }
220 
prcmu_set_power_state(u8 state,bool keep_ulp_clk,bool keep_ap_pll)221 static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
222 		bool keep_ap_pll)
223 {
224 	return db8500_prcmu_set_power_state(state, keep_ulp_clk,
225 		keep_ap_pll);
226 }
227 
prcmu_get_power_state_result(void)228 static inline u8 prcmu_get_power_state_result(void)
229 {
230 	return db8500_prcmu_get_power_state_result();
231 }
232 
prcmu_set_epod(u16 epod_id,u8 epod_state)233 static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
234 {
235 	return db8500_prcmu_set_epod(epod_id, epod_state);
236 }
237 
prcmu_enable_wakeups(u32 wakeups)238 static inline void prcmu_enable_wakeups(u32 wakeups)
239 {
240 	db8500_prcmu_enable_wakeups(wakeups);
241 }
242 
prcmu_disable_wakeups(void)243 static inline void prcmu_disable_wakeups(void)
244 {
245 	prcmu_enable_wakeups(0);
246 }
247 
prcmu_config_abb_event_readout(u32 abb_events)248 static inline void prcmu_config_abb_event_readout(u32 abb_events)
249 {
250 	db8500_prcmu_config_abb_event_readout(abb_events);
251 }
252 
prcmu_get_abb_event_buffer(void __iomem ** buf)253 static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
254 {
255 	db8500_prcmu_get_abb_event_buffer(buf);
256 }
257 
258 int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
259 int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
260 int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size);
261 
262 int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
263 
prcmu_request_clock(u8 clock,bool enable)264 static inline int prcmu_request_clock(u8 clock, bool enable)
265 {
266 	return db8500_prcmu_request_clock(clock, enable);
267 }
268 
269 unsigned long prcmu_clock_rate(u8 clock);
270 long prcmu_round_clock_rate(u8 clock, unsigned long rate);
271 int prcmu_set_clock_rate(u8 clock, unsigned long rate);
272 
prcmu_get_ddr_opp(void)273 static inline int prcmu_get_ddr_opp(void)
274 {
275 	return db8500_prcmu_get_ddr_opp();
276 }
277 
prcmu_set_arm_opp(u8 opp)278 static inline int prcmu_set_arm_opp(u8 opp)
279 {
280 	return db8500_prcmu_set_arm_opp(opp);
281 }
282 
prcmu_get_arm_opp(void)283 static inline int prcmu_get_arm_opp(void)
284 {
285 	return db8500_prcmu_get_arm_opp();
286 }
287 
prcmu_set_ape_opp(u8 opp)288 static inline int prcmu_set_ape_opp(u8 opp)
289 {
290 	return db8500_prcmu_set_ape_opp(opp);
291 }
292 
prcmu_get_ape_opp(void)293 static inline int prcmu_get_ape_opp(void)
294 {
295 	return db8500_prcmu_get_ape_opp();
296 }
297 
prcmu_request_ape_opp_100_voltage(bool enable)298 static inline int prcmu_request_ape_opp_100_voltage(bool enable)
299 {
300 	return db8500_prcmu_request_ape_opp_100_voltage(enable);
301 }
302 
prcmu_system_reset(u16 reset_code)303 static inline void prcmu_system_reset(u16 reset_code)
304 {
305 	return db8500_prcmu_system_reset(reset_code);
306 }
307 
prcmu_get_reset_code(void)308 static inline u16 prcmu_get_reset_code(void)
309 {
310 	return db8500_prcmu_get_reset_code();
311 }
312 
313 int prcmu_ac_wake_req(void);
314 void prcmu_ac_sleep_req(void);
prcmu_modem_reset(void)315 static inline void prcmu_modem_reset(void)
316 {
317 	return db8500_prcmu_modem_reset();
318 }
319 
prcmu_is_ac_wake_requested(void)320 static inline bool prcmu_is_ac_wake_requested(void)
321 {
322 	return db8500_prcmu_is_ac_wake_requested();
323 }
324 
prcmu_config_esram0_deep_sleep(u8 state)325 static inline int prcmu_config_esram0_deep_sleep(u8 state)
326 {
327 	return db8500_prcmu_config_esram0_deep_sleep(state);
328 }
329 
prcmu_config_hotdog(u8 threshold)330 static inline int prcmu_config_hotdog(u8 threshold)
331 {
332 	return db8500_prcmu_config_hotdog(threshold);
333 }
334 
prcmu_config_hotmon(u8 low,u8 high)335 static inline int prcmu_config_hotmon(u8 low, u8 high)
336 {
337 	return db8500_prcmu_config_hotmon(low, high);
338 }
339 
prcmu_start_temp_sense(u16 cycles32k)340 static inline int prcmu_start_temp_sense(u16 cycles32k)
341 {
342 	return  db8500_prcmu_start_temp_sense(cycles32k);
343 }
344 
prcmu_stop_temp_sense(void)345 static inline int prcmu_stop_temp_sense(void)
346 {
347 	return  db8500_prcmu_stop_temp_sense();
348 }
349 
prcmu_read(unsigned int reg)350 static inline u32 prcmu_read(unsigned int reg)
351 {
352 	return db8500_prcmu_read(reg);
353 }
354 
prcmu_write(unsigned int reg,u32 value)355 static inline void prcmu_write(unsigned int reg, u32 value)
356 {
357 	db8500_prcmu_write(reg, value);
358 }
359 
prcmu_write_masked(unsigned int reg,u32 mask,u32 value)360 static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
361 {
362 	db8500_prcmu_write_masked(reg, mask, value);
363 }
364 
prcmu_enable_a9wdog(u8 id)365 static inline int prcmu_enable_a9wdog(u8 id)
366 {
367 	return db8500_prcmu_enable_a9wdog(id);
368 }
369 
prcmu_disable_a9wdog(u8 id)370 static inline int prcmu_disable_a9wdog(u8 id)
371 {
372 	return db8500_prcmu_disable_a9wdog(id);
373 }
374 
prcmu_kick_a9wdog(u8 id)375 static inline int prcmu_kick_a9wdog(u8 id)
376 {
377 	return db8500_prcmu_kick_a9wdog(id);
378 }
379 
prcmu_load_a9wdog(u8 id,u32 timeout)380 static inline int prcmu_load_a9wdog(u8 id, u32 timeout)
381 {
382 	return db8500_prcmu_load_a9wdog(id, timeout);
383 }
384 
prcmu_config_a9wdog(u8 num,bool sleep_auto_off)385 static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
386 {
387 	return db8500_prcmu_config_a9wdog(num, sleep_auto_off);
388 }
389 #else
390 
prcmu_early_init(void)391 static inline void prcmu_early_init(void) {}
392 
prcmu_set_power_state(u8 state,bool keep_ulp_clk,bool keep_ap_pll)393 static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
394 	bool keep_ap_pll)
395 {
396 	return 0;
397 }
398 
prcmu_set_epod(u16 epod_id,u8 epod_state)399 static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
400 {
401 	return 0;
402 }
403 
prcmu_enable_wakeups(u32 wakeups)404 static inline void prcmu_enable_wakeups(u32 wakeups) {}
405 
prcmu_disable_wakeups(void)406 static inline void prcmu_disable_wakeups(void) {}
407 
prcmu_abb_read(u8 slave,u8 reg,u8 * value,u8 size)408 static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
409 {
410 	return -ENOSYS;
411 }
412 
prcmu_abb_write(u8 slave,u8 reg,u8 * value,u8 size)413 static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
414 {
415 	return -ENOSYS;
416 }
417 
prcmu_abb_write_masked(u8 slave,u8 reg,u8 * value,u8 * mask,u8 size)418 static inline int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask,
419 	u8 size)
420 {
421 	return -ENOSYS;
422 }
423 
prcmu_config_clkout(u8 clkout,u8 source,u8 div)424 static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
425 {
426 	return 0;
427 }
428 
prcmu_request_clock(u8 clock,bool enable)429 static inline int prcmu_request_clock(u8 clock, bool enable)
430 {
431 	return 0;
432 }
433 
prcmu_round_clock_rate(u8 clock,unsigned long rate)434 static inline long prcmu_round_clock_rate(u8 clock, unsigned long rate)
435 {
436 	return 0;
437 }
438 
prcmu_set_clock_rate(u8 clock,unsigned long rate)439 static inline int prcmu_set_clock_rate(u8 clock, unsigned long rate)
440 {
441 	return 0;
442 }
443 
prcmu_clock_rate(u8 clock)444 static inline unsigned long prcmu_clock_rate(u8 clock)
445 {
446 	return 0;
447 }
448 
prcmu_set_ape_opp(u8 opp)449 static inline int prcmu_set_ape_opp(u8 opp)
450 {
451 	return 0;
452 }
453 
prcmu_get_ape_opp(void)454 static inline int prcmu_get_ape_opp(void)
455 {
456 	return APE_100_OPP;
457 }
458 
prcmu_request_ape_opp_100_voltage(bool enable)459 static inline int prcmu_request_ape_opp_100_voltage(bool enable)
460 {
461 	return 0;
462 }
463 
prcmu_set_arm_opp(u8 opp)464 static inline int prcmu_set_arm_opp(u8 opp)
465 {
466 	return 0;
467 }
468 
prcmu_get_arm_opp(void)469 static inline int prcmu_get_arm_opp(void)
470 {
471 	return ARM_100_OPP;
472 }
473 
prcmu_get_ddr_opp(void)474 static inline int prcmu_get_ddr_opp(void)
475 {
476 	return DDR_100_OPP;
477 }
478 
prcmu_system_reset(u16 reset_code)479 static inline void prcmu_system_reset(u16 reset_code) {}
480 
prcmu_get_reset_code(void)481 static inline u16 prcmu_get_reset_code(void)
482 {
483 	return 0;
484 }
485 
prcmu_ac_wake_req(void)486 static inline int prcmu_ac_wake_req(void)
487 {
488 	return 0;
489 }
490 
prcmu_ac_sleep_req(void)491 static inline void prcmu_ac_sleep_req(void) {}
492 
prcmu_modem_reset(void)493 static inline void prcmu_modem_reset(void) {}
494 
prcmu_is_ac_wake_requested(void)495 static inline bool prcmu_is_ac_wake_requested(void)
496 {
497 	return false;
498 }
499 
prcmu_config_esram0_deep_sleep(u8 state)500 static inline int prcmu_config_esram0_deep_sleep(u8 state)
501 {
502 	return 0;
503 }
504 
prcmu_config_abb_event_readout(u32 abb_events)505 static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
506 
prcmu_get_abb_event_buffer(void __iomem ** buf)507 static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
508 {
509 	*buf = NULL;
510 }
511 
prcmu_config_hotdog(u8 threshold)512 static inline int prcmu_config_hotdog(u8 threshold)
513 {
514 	return 0;
515 }
516 
prcmu_config_hotmon(u8 low,u8 high)517 static inline int prcmu_config_hotmon(u8 low, u8 high)
518 {
519 	return 0;
520 }
521 
prcmu_start_temp_sense(u16 cycles32k)522 static inline int prcmu_start_temp_sense(u16 cycles32k)
523 {
524 	return 0;
525 }
526 
prcmu_stop_temp_sense(void)527 static inline int prcmu_stop_temp_sense(void)
528 {
529 	return 0;
530 }
531 
prcmu_read(unsigned int reg)532 static inline u32 prcmu_read(unsigned int reg)
533 {
534 	return 0;
535 }
536 
prcmu_write(unsigned int reg,u32 value)537 static inline void prcmu_write(unsigned int reg, u32 value) {}
538 
prcmu_write_masked(unsigned int reg,u32 mask,u32 value)539 static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
540 
541 #endif
542 
prcmu_set(unsigned int reg,u32 bits)543 static inline void prcmu_set(unsigned int reg, u32 bits)
544 {
545 	prcmu_write_masked(reg, bits, bits);
546 }
547 
prcmu_clear(unsigned int reg,u32 bits)548 static inline void prcmu_clear(unsigned int reg, u32 bits)
549 {
550 	prcmu_write_masked(reg, bits, 0);
551 }
552 
553 /* PRCMU QoS APE OPP class */
554 #define PRCMU_QOS_APE_OPP 1
555 #define PRCMU_QOS_DDR_OPP 2
556 #define PRCMU_QOS_ARM_OPP 3
557 #define PRCMU_QOS_DEFAULT_VALUE -1
558 
prcmu_qos_get_cpufreq_opp_delay(void)559 static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
560 {
561 	return 0;
562 }
563 
prcmu_qos_requirement(int prcmu_qos_class)564 static inline int prcmu_qos_requirement(int prcmu_qos_class)
565 {
566 	return 0;
567 }
568 
prcmu_qos_add_requirement(int prcmu_qos_class,char * name,s32 value)569 static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
570 					    char *name, s32 value)
571 {
572 	return 0;
573 }
574 
prcmu_qos_update_requirement(int prcmu_qos_class,char * name,s32 new_value)575 static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
576 					       char *name, s32 new_value)
577 {
578 	return 0;
579 }
580 
prcmu_qos_remove_requirement(int prcmu_qos_class,char * name)581 static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
582 {
583 }
584 
prcmu_qos_add_notifier(int prcmu_qos_class,struct notifier_block * notifier)585 static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
586 					 struct notifier_block *notifier)
587 {
588 	return 0;
589 }
prcmu_qos_remove_notifier(int prcmu_qos_class,struct notifier_block * notifier)590 static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
591 					    struct notifier_block *notifier)
592 {
593 	return 0;
594 }
595 
596 #endif /* __MACH_PRCMU_H */
597