Home
last modified time | relevance | path

Searched refs:DEV (Results 1 – 25 of 64) sorted by relevance

123

/linux-5.19.10/samples/pktgen/
Dpktgen_sample01_simple.sh45 pg_thread $thread "add_device" $DEV
48 pg_set $DEV "count $COUNT"
52 pg_set $DEV "clone_skb $CLONE_SKB"
55 pg_set $DEV "pkt_size $PKT_SIZE"
58 pg_set $DEV "delay $DELAY"
61 pg_set $DEV "flag NO_TIMESTAMP"
64 pg_set $DEV "dst_mac $DST_MAC"
65 pg_set $DEV "dst${IP6}_min $DST_MIN"
66 pg_set $DEV "dst${IP6}_max $DST_MAX"
70 pg_set $DEV "flag UDPDST_RND"
[all …]
Dpktgen_sample06_numa_awared_queue_irq_affinity.sh25 node=`get_iface_node $DEV`
26 irq_array=(`get_iface_irqs $DEV`)
56 dev=${DEV}@${thread}
108 dev=${DEV}@${thread}
Dparameters.sh33 export DEV=$OPTARG
34 info "Output device set to: DEV=$DEV"
123 if [ -z "$DEV" ]; then
Dpktgen_bench_xmit_mode_netif_receive.sh60 dev=${DEV}@${thread}
96 dev=${DEV}@${thread}
/linux-5.19.10/Documentation/translations/zh_CN/vm/
Dmmu_notifier.rst47 DEV-thread-0 {读取addrA并填充设备TLB}
48 DEV-thread-2 {读取addrB并填充设备TLB}
54 DEV-thread-0 {}
55 DEV-thread-2 {}
61 DEV-thread-0 {}
62 DEV-thread-2 {}
68 DEV-thread-0 {}
69 DEV-thread-2 {}
75 DEV-thread-0 {}
76 DEV-thread-2 {}
[all …]
/linux-5.19.10/tools/testing/selftests/net/
Dmsg_zerocopy.sh8 readonly DEV="veth0"
90 ip link add "${DEV}" mtu "${DEV_MTU}" netns "${NS1}" type veth \
91 peer name "${DEV}" mtu "${DEV_MTU}" netns "${NS2}"
94 ip -netns "${NS1}" link set "${DEV}" up
95 ip -netns "${NS2}" link set "${DEV}" up
98 ip -netns "${NS1}" link set dev "${DEV}" address 02:02:02:02:02:02
99 ip -netns "${NS2}" link set dev "${DEV}" address 06:06:06:06:06:06
102 ip -netns "${NS1}" addr add 192.168.1.1/24 dev "${DEV}"
103 ip -netns "${NS2}" addr add 192.168.1.2/24 dev "${DEV}"
104 ip -netns "${NS1}" addr add fd::1/64 dev "${DEV}" nodad
[all …]
Dso_txtime.sh8 readonly DEV="veth0"
32 ip link add "${DEV}" netns "${NS1}" type veth \
33 peer name "${DEV}" netns "${NS2}"
36 ip -netns "${NS1}" link set "${DEV}" up
37 ip -netns "${NS2}" link set "${DEV}" up
40 ip -netns "${NS1}" link set dev "${DEV}" address 02:02:02:02:02:02
41 ip -netns "${NS2}" link set dev "${DEV}" address 06:06:06:06:06:06
44 ip -netns "${NS1}" addr add 192.168.1.1/24 dev "${DEV}"
45 ip -netns "${NS2}" addr add 192.168.1.2/24 dev "${DEV}"
46 ip -netns "${NS1}" addr add fd::1/64 dev "${DEV}" nodad
[all …]
Dtoeplitz.sh29 DEV="eth0"
34 echo $(ethtool -x "${DEV}" |
89 for i in /sys/class/net/${DEV}/queues/rx-*/rps_cpus
109 ethtool -k "${DEV}" | grep -q "${pattern}" || die "rxhash must be enabled"
137 DEV="$1"
147 setup_loopback_environment "${DEV}"
150 setup_macvlan_ns "${DEV}" server_ns server \
152 setup_macvlan_ns "${DEV}" client_ns client \
158 cleanup_loopback "${DEV}"
174 -d "${PORT}" -i "${DEV}" -k "${KEY}" -T 1000 \
[all …]
Dfib_rule_tests.sh22 DEV=dummy0
139 $IP -6 route add table $RTABLE default via $GW_IP6 dev $DEV onlink
141 match="oif $DEV"
144 match="from $SRC_IP6 iif $DEV"
240 $IP route add table $RTABLE default via $GW_IP4 dev $DEV onlink
242 match="oif $DEV"
248 ip netns exec testns sysctl -qw net.ipv4.conf.$DEV.rp_filter=0
249 match="from $SRC_IP iif $DEV"
Dxfrm_policy.sh355 DEV=veth0
356 ip link add $DEV netns ns1 type veth peer name eth1 netns ns3
357 ip link add $DEV netns ns2 type veth peer name eth1 netns ns4
359 ip link add $DEV netns ns3 type veth peer name veth0 netns ns4
361 DEV=veth0
363 ip -net ns$i link set $DEV up
364 ip -net ns$i addr add 10.0.$i.2/24 dev $DEV
365 ip -net ns$i addr add dead:$i::2/64 dev $DEV
367 ip -net ns$i addr add 10.0.$i.253 dev $DEV
368 ip -net ns$i addr add 10.0.$i.254 dev $DEV
[all …]
Ddrop_monitor_tests.sh22 DEV=netdevsim${DEV_ADDR}
23 DEVLINK_DEV=netdevsim/${DEV}
51 local netdev=$($NS_EXEC ls ${NETDEVSIM_PATH}/devices/${DEV}/net/)
/linux-5.19.10/tools/testing/selftests/bpf/
Dtest_tunnel.sh76 ip link add dev $DEV type $TYPE key 2 external
77 ip link set dev $DEV up
78 ip addr add dev $DEV 10.1.1.200/24
100 ip link add dev $DEV type $TYPE external
101 ip addr add dev $DEV 10.1.1.200/24
102 ip addr add dev $DEV fc80::200/24
103 ip link set dev $DEV up
124 ip link add dev $DEV type $TYPE external
125 ip link set dev $DEV up
126 ip addr add dev $DEV 10.1.1.200/24
[all …]
/linux-5.19.10/tools/testing/selftests/ptp/
Dphc.sh9 DEV=$1
19 if [[ "$DEV" == "" ]]; then
36 phc_ctl $DEV get &> /dev/null
39 echo "SKIP: unknown clock $DEV: No such device"
94 res=$(phc_ctl $DEV set 0 wait 120.5 get 2> /dev/null \
105 res=$(phc_ctl $DEV set 0 adj 10 get 2> /dev/null \
117 res=$(phc_ctl $DEV freq 10000000 set 0 wait 100.5 get 2> /dev/null \
128 phc_ctl $DEV freq 0.0 &> /dev/null
129 phc_ctl $DEV set &> /dev/null
/linux-5.19.10/samples/bpf/
Dxdp2skb_meta.sh88 unset DEV
93 DEV=$2
94 info "Device set to: DEV=$DEV" >&2
136 if [[ -z $DEV ]]; then
208 flush_tc $DEV
209 flush_xdp $DEV
214 list_tc $DEV
215 list_xdp $DEV
219 attach_tc_mark $DEV $FILE
220 attach_xdp_mark $DEV $FILE
/linux-5.19.10/drivers/crypto/cavium/nitrox/
Dnitrox_isr.c50 dev_err_ratelimited(DEV(ndev), "NSP_CORE_INT 0x%016llx\n", value); in clear_nps_core_err_intr()
60 dev_err_ratelimited(DEV(ndev), "NPS_PKT_INT 0x%016llx\n", in clear_nps_pkt_err_intr()
67 dev_err_ratelimited(DEV(ndev), in clear_nps_pkt_err_intr()
77 dev_err_ratelimited(DEV(ndev), in clear_nps_pkt_err_intr()
83 dev_err_ratelimited(DEV(ndev), in clear_nps_pkt_err_intr()
91 dev_err_ratelimited(DEV(ndev), in clear_nps_pkt_err_intr()
100 dev_err_ratelimited(DEV(ndev), in clear_nps_pkt_err_intr()
106 dev_err_ratelimited(DEV(ndev), in clear_nps_pkt_err_intr()
117 dev_err_ratelimited(DEV(ndev), "POM_INT 0x%016llx\n", value); in clear_pom_err_intr()
126 dev_err_ratelimited(DEV(ndev), "PEM(0)_INT 0x%016llx\n", value); in clear_pem_err_intr()
[all …]
Dnitrox_main.c124 dev_info(DEV(ndev), "Loading firmware \"%s\"\n", fw_name); in nitrox_load_fw()
126 ret = request_firmware(&fw, fw_name, DEV(ndev)); in nitrox_load_fw()
128 dev_err(DEV(ndev), "failed to get firmware %s\n", fw_name); in nitrox_load_fw()
136 dev_err(DEV(ndev), "Invalid ucode size: %u for firmware %s\n", in nitrox_load_fw()
175 dev_info(DEV(ndev), "Loading firmware \"%s\"\n", fw_name); in nitrox_load_fw()
177 ret = request_firmware(&fw, fw_name, DEV(ndev)); in nitrox_load_fw()
179 dev_err(DEV(ndev), "failed to get firmware %s\n", fw_name); in nitrox_load_fw()
187 dev_err(DEV(ndev), "Invalid ucode size: %u for firmware %s\n", in nitrox_load_fw()
533 dev_err(DEV(ndev), "Device refcnt not zero (%d)\n", in nitrox_remove()
538 dev_info(DEV(ndev), "Removing Device %x:%x\n", in nitrox_remove()
Dnitrox_sriov.c159 dev_err(DEV(ndev), "Invalid num_vfs %d\n", num_vfs); in nitrox_sriov_enable()
168 dev_err(DEV(ndev), "failed to enable PCI sriov %d\n", err); in nitrox_sriov_enable()
171 dev_info(DEV(ndev), "Enabled VF(s) %d\n", num_vfs); in nitrox_sriov_enable()
209 dev_warn(DEV(ndev), "VFs are attached to VM. Can't disable SR-IOV\n"); in nitrox_sriov_disable()
/linux-5.19.10/Documentation/vm/
Dmmu_notifier.rst45 DEV-thread-0 {read addrA and populate device TLB}
46 DEV-thread-2 {read addrB and populate device TLB}
52 DEV-thread-0 {}
53 DEV-thread-2 {}
59 DEV-thread-0 {}
60 DEV-thread-2 {}
66 DEV-thread-0 {}
67 DEV-thread-2 {}
73 DEV-thread-0 {}
74 DEV-thread-2 {}
[all …]
/linux-5.19.10/tools/testing/selftests/netfilter/
Dconntrack_icmp_related.sh81 DEV=veth0
82 ip link add $DEV netns nsclient1 type veth peer name eth1 netns nsrouter1
83 DEV=veth0
84 ip link add $DEV netns nsclient2 type veth peer name eth1 netns nsrouter2
86 DEV=veth0
87 ip link add $DEV netns nsrouter1 type veth peer name eth2 netns nsrouter2
89 DEV=veth0
91 ip -net nsclient$i link set $DEV up
92 ip -net nsclient$i addr add $(ipv4 $i)/24 dev $DEV
93 ip -net nsclient$i addr add $(ipv6 $i)/64 dev $DEV
/linux-5.19.10/tools/testing/selftests/drivers/net/netdevsim/
Ddevlink_trap.sh26 DEV=netdevsim${DEV_ADDR}
27 DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/
35 DEVLINK_DEV=netdevsim/${DEV}
456 echo 1 > ${NETDEVSIM_PATH}/devices/${DEV}/new_port
461 echo 1 > ${NETDEVSIM_PATH}/devices/${DEV}/del_port
470 if [ ! -d "${NETDEVSIM_PATH}/devices/${DEV}" ]; then
477 if [ ! -d "${NETDEVSIM_PATH}/devices/${DEV}/net/" ]; then
485 NETDEV=$(ls ${NETDEVSIM_PATH}/devices/${DEV}/net/)
Dpsample.sh16 DEV=netdevsim${DEV_ADDR}
17 SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/
18 PSAMPLE_DIR=/sys/kernel/debug/netdevsim/$DEV/psample/
25 DEVLINK_DEV=netdevsim/${DEV}
/linux-5.19.10/drivers/mfd/
Dsta2x11-mfd.c448 #define DEV(_name, _r) \ macro
453 DEV(STA2X11_MFD_GPIO_NAME, gpio_resources),
454 DEV(STA2X11_MFD_SCTL_NAME, sctl_resources),
455 DEV(STA2X11_MFD_SCR_NAME, scr_resources),
456 DEV(STA2X11_MFD_TIME_NAME, time_resources),
460 DEV(STA2X11_MFD_APBREG_NAME, apbreg_resources),
484 DEV(STA2X11_MFD_VIC_NAME, vic_resources),
488 DEV(STA2X11_MFD_APB_SOC_REGS_NAME, apb_soc_regs_resources),
/linux-5.19.10/Documentation/block/
Dswitching-sched.rst22 echo SCHEDNAME > /sys/block/DEV/queue/scheduler
24 where SCHEDNAME is the name of a defined IO scheduler, and DEV is the
28 a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
/linux-5.19.10/Documentation/networking/devlink/
Ddevlink-region.rst40 $ devlink region show [ DEV/REGION ]
41 $ devlink region del DEV/REGION snapshot SNAPSHOT_ID
42 $ devlink region dump DEV/REGION [ snapshot SNAPSHOT_ID ]
43 $ devlink region read DEV/REGION [ snapshot SNAPSHOT_ID ] address ADDRESS length length
/linux-5.19.10/drivers/devfreq/
Dgovernor.h18 #define to_devfreq(DEV) container_of((DEV), struct devfreq, dev) argument

123