| /linux-5.19.10/drivers/net/ethernet/chelsio/cxgb3/ |
| D | vsc8211.c | 119 BMCR_PDOWN | BMCR_ISOLATE, in vsc8211_autoneg_enable()
126 BMCR_PDOWN | BMCR_ISOLATE, in vsc8211_autoneg_restart()
318 return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN, in vsc8211_power_down()
319 enable ? BMCR_PDOWN : 0); in vsc8211_power_down()
|
| /linux-5.19.10/drivers/net/phy/ |
| D | national.c | 125 phy_write(phydev, MII_BMCR, (bmcr | BMCR_PDOWN)); in ns_giga_speed_fallback()
131 phy_write(phydev, MII_BMCR, (bmcr & ~BMCR_PDOWN)); in ns_giga_speed_fallback()
|
| D | broadcom.c | 137 rc = phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN); in bcm54616s_config_init()
151 rc = phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN); in bcm54616s_config_init()
162 return phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN); in bcm54616s_config_init()
425 ret = phy_write(phydev, MII_BMCR, BMCR_PDOWN); in bcm54xx_suspend()
|
| D | bcm54140.c | 479 ret = phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN); in bcm54140_b0_workaround()
483 ret = phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0); in bcm54140_b0_workaround()
|
| D | phy_device.c | 2047 ~(BMCR_LOOPBACK | BMCR_ISOLATE | BMCR_PDOWN), ctl); in genphy_setup_forced()
2630 return phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN); in genphy_suspend()
2636 return phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN); in genphy_resume()
|
| D | at803x.c | 575 value = BMCR_PDOWN; in at803x_suspend()
584 return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0); in at803x_resume()
|
| /linux-5.19.10/drivers/net/dsa/b53/ |
| D | b53_serdes.c | 151 reg &= ~BMCR_PDOWN; in b53_serdes_link_set()
153 reg |= BMCR_PDOWN; in b53_serdes_link_set()
|
| /linux-5.19.10/include/uapi/linux/ |
| D | mii.h | 47 #define BMCR_PDOWN 0x0800 /* Enable low power state */ macro
|
| D | mdio.h | 98 #define MDIO_CTRL1_LPOWER BMCR_PDOWN
|
| /linux-5.19.10/drivers/net/ |
| D | sungem_phy.c | 73 val &= ~(BMCR_ISOLATE | BMCR_PDOWN); in reset_one_mii_phy()
220 sungem_phy_write(phy, MII_BMCR, BMCR_PDOWN); in bcm5400_suspend()
276 sungem_phy_write(phy, MII_BMCR, BMCR_PDOWN); in bcm5401_suspend()
413 sungem_phy_write(phy, MII_BMCR, BMCR_PDOWN); in generic_suspend()
|
| /linux-5.19.10/drivers/net/dsa/mv88e6xxx/ |
| D | serdes.c | 135 new_val = val & ~BMCR_PDOWN; in mv88e6352_serdes_power()
137 new_val = val | BMCR_PDOWN; in mv88e6352_serdes_power()
736 new_val = val & ~(BMCR_RESET | BMCR_LOOPBACK | BMCR_PDOWN); in mv88e6390_serdes_power_sgmii()
738 new_val = val | BMCR_PDOWN; in mv88e6390_serdes_power_sgmii()
|
| /linux-5.19.10/drivers/net/ethernet/smsc/ |
| D | smc911x.c | 746 bmcr |= BMCR_PDOWN; in smc911x_phy_fixed()
764 bmcr &= ~BMCR_PDOWN; in smc911x_phy_fixed()
830 bmcr |= BMCR_PDOWN; in smc911x_phy_powerdown()
|
| D | smsc911x.c | 1364 if (rc & BMCR_PDOWN) { in smsc911x_phy_general_power_up()
1365 rc = phy_write(phy_dev, MII_BMCR, rc & ~BMCR_PDOWN); in smsc911x_phy_general_power_up()
|
| D | smc91x.c | 993 smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN); in smc_phy_powerdown()
|
| /linux-5.19.10/drivers/net/usb/ |
| D | r8152.c | 5764 data &= ~BMCR_PDOWN; in r8153b_hw_phy_cfg()
6876 if (data & BMCR_PDOWN) { in r8152b_init()
6877 data &= ~BMCR_PDOWN; in r8152b_init()
6938 if (data & BMCR_PDOWN) { in r8153_init()
6939 data &= ~BMCR_PDOWN; in r8153_init()
7074 if (data & BMCR_PDOWN) { in r8153b_init()
7075 data &= ~BMCR_PDOWN; in r8153b_init()
7165 if (data & BMCR_PDOWN) { in r8153c_init()
7166 data &= ~BMCR_PDOWN; in r8153c_init()
7618 if (data & BMCR_PDOWN) { in r8156b_hw_phy_cfg()
[all …]
|
| /linux-5.19.10/drivers/net/ethernet/dec/tulip/ |
| D | media.c | 519 BMCR_PDOWN | BMCR_SPEED100 | BMCR_LOOPBACK | in tulip_find_mii()
|
| /linux-5.19.10/drivers/net/ethernet/sun/ |
| D | sunbmac.c | 500 bp->sw_bmcr = (BMCR_ISOLATE | BMCR_PDOWN | BMCR_LOOPBACK); in try_next_permutation()
593 bp->sw_bmcr = (BMCR_ISOLATE | BMCR_PDOWN | BMCR_LOOPBACK); in bigmac_begin_auto_negotiation()
|
| D | cassini.c | 428 if ((ctl & BMCR_PDOWN) == 0) in cas_phy_powerup()
430 ctl &= ~BMCR_PDOWN; in cas_phy_powerup()
438 if (ctl & BMCR_PDOWN) in cas_phy_powerdown()
440 ctl |= BMCR_PDOWN; in cas_phy_powerdown()
|
| D | sunhme.c | 963 (BMCR_LOOPBACK|BMCR_PDOWN|BMCR_ISOLATE)); in happy_meal_tcvr_reset()
979 (BMCR_LOOPBACK|BMCR_PDOWN|BMCR_ISOLATE)); in happy_meal_tcvr_reset()
|
| /linux-5.19.10/drivers/net/dsa/microchip/ |
| D | ksz8795.c | 693 data |= BMCR_PDOWN; in ksz8_r_phy()
852 if (val & BMCR_PDOWN) in ksz8_w_phy()
|
| /linux-5.19.10/drivers/net/ethernet/intel/e1000e/ |
| D | phy.c | 2703 mii_reg &= ~BMCR_PDOWN; in e1000_power_up_phy_copper()
2721 mii_reg |= BMCR_PDOWN; in e1000_power_down_phy_copper()
|
| /linux-5.19.10/drivers/net/dsa/ |
| D | lan9303-core.c | 1109 lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN); in lan9303_port_disable()
|
| /linux-5.19.10/drivers/net/ethernet/tundra/ |
| D | tsi108_eth.c | 1280 tsi108_write_mii(data, MII_BMCR, BMCR_PDOWN); in tsi108_kill_phy()
|
| /linux-5.19.10/drivers/net/ethernet/ |
| D | jme.c | 1694 bmcr &= ~BMCR_PDOWN; in jme_phy_on()
1707 bmcr |= BMCR_PDOWN; in jme_phy_off()
|
| /linux-5.19.10/drivers/net/ethernet/agere/ |
| D | et131x.c | 1459 data &= ~BMCR_PDOWN; in et1310_phy_power_switch()
1461 data |= BMCR_PDOWN; in et1310_phy_power_switch()
|