1 /******************************************************************************
2  *
3  * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * Modifications for inclusion into the Linux staging tree are
19  * Copyright(c) 2010 Larry Finger. All rights reserved.
20  *
21  * Contact information:
22  * WLAN FAE <wlanfae@realtek.com>
23  * Larry Finger <Larry.Finger@lwfinger.net>
24  *
25  ******************************************************************************/
26 #ifndef __RTL871X_CMD_H_
27 #define __RTL871X_CMD_H_
28 
29 #include "wlan_bssdef.h"
30 #include "rtl871x_rf.h"
31 #define C2H_MEM_SZ (16*1024)
32 
33 #include "osdep_service.h"
34 #include "ieee80211.h"
35 
36 #define FREE_CMDOBJ_SZ	128
37 #define MAX_CMDSZ	512
38 #define MAX_RSPSZ	512
39 #define MAX_EVTSZ	1024
40 #define CMDBUFF_ALIGN_SZ 512
41 
42 struct cmd_obj {
43 	u16	cmdcode;
44 	u8	res;
45 	u8	*parmbuf;
46 	u32	cmdsz;
47 	u8	*rsp;
48 	u32	rspsz;
49 	struct list_head list;
50 };
51 
52 struct cmd_priv {
53 	struct semaphore cmd_queue_sema;
54 	struct semaphore terminate_cmdthread_sema;
55 	struct  __queue	cmd_queue;
56 	u8 cmd_seq;
57 	u8 *cmd_buf;	/*shall be non-paged, and 4 bytes aligned*/
58 	u8 *cmd_allocated_buf;
59 	u8 *rsp_buf;	/*shall be non-paged, and 4 bytes aligned*/
60 	u8 *rsp_allocated_buf;
61 	u32 cmd_issued_cnt;
62 	u32 cmd_done_cnt;
63 	u32 rsp_cnt;
64 	struct _adapter *padapter;
65 };
66 
67 struct evt_obj {
68 	u16 evtcode;
69 	u8 res;
70 	u8 *parmbuf;
71 	u32 evtsz;
72 	struct list_head list;
73 };
74 
75 struct	evt_priv {
76 	struct  __queue	evt_queue;
77 	u8	event_seq;
78 	u8	*evt_buf;	/*shall be non-paged, and 4 bytes aligned*/
79 	u8	*evt_allocated_buf;
80 	u32	evt_done_cnt;
81 	struct tasklet_struct event_tasklet;
82 };
83 
84 #define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \
85 do {\
86 	_init_listhead(&pcmd->list);\
87 	pcmd->cmdcode = code;\
88 	pcmd->parmbuf = (u8 *)(pparm);\
89 	pcmd->cmdsz = sizeof(*pparm);\
90 	pcmd->rsp = NULL;\
91 	pcmd->rspsz = 0;\
92 } while (0)
93 
94 u32 r8712_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj);
95 u32 r8712_enqueue_cmd_ex(struct cmd_priv *pcmdpriv, struct cmd_obj *obj);
96 struct cmd_obj *r8712_dequeue_cmd(struct  __queue *queue);
97 void r8712_free_cmd_obj(struct cmd_obj *pcmd);
98 int r8712_cmd_thread(void *context);
99 u32 r8712_init_cmd_priv(struct cmd_priv *pcmdpriv);
100 void r8712_free_cmd_priv(struct cmd_priv *pcmdpriv);
101 u32 r8712_init_evt_priv(struct evt_priv *pevtpriv);
102 void r8712_free_evt_priv(struct evt_priv *pevtpriv);
103 
104 enum rtl871x_drvint_cid {
105 	NONE_WK_CID,
106 	WDG_WK_CID,
107 	MAX_WK_CID
108 };
109 
110 enum RFINTFS {
111 	SWSI,
112 	HWSI,
113 	HWPI,
114 };
115 
116 /*
117  * Caller Mode: Infra, Ad-HoC(C)
118  * Notes: To enter USB suspend mode
119  * Command Mode
120  */
121 struct usb_suspend_parm {
122 	u32 action; /* 1: sleep, 0:resume */
123 };
124 
125 /*
126  * Caller Mode: Infra, Ad-Hoc
127  * Notes: To join the specified bss
128  * Command Event Mode
129  */
130 struct joinbss_parm {
131 	struct ndis_wlan_bssid_ex network;
132 };
133 
134 /*
135  * Caller Mode: Infra, Ad-HoC(C)
136  * Notes: To disconnect the current associated BSS
137  * Command Mode
138  */
139 struct disconnect_parm {
140 	u32 rsvd;
141 };
142 
143 /*
144  * Caller Mode: AP, Ad-HoC(M)
145  * Notes: To create a BSS
146  * Command Mode
147  */
148 struct createbss_parm {
149 	struct ndis_wlan_bssid_ex network;
150 };
151 
152 /*
153  * Caller Mode: AP, Ad-HoC, Infra
154  * Notes: To set the NIC mode of RTL8711
155  * Command Mode
156  * The definition of mode:
157  *
158  * #define IW_MODE_AUTO	0	// Let the driver decides which AP to join
159  * #define IW_MODE_ADHOC	1	// Single cell network (Ad-Hoc Clients)
160  * #define IW_MODE_INFRA	2	// Multi cell network, roaming, ..
161  * #define IW_MODE_MASTER	3	// Synchronisation master or AP
162  * #define IW_MODE_REPEAT	4	// Wireless Repeater (forwarder)
163  * #define IW_MODE_SECOND	5	// Secondary master/repeater (backup)
164  * #define IW_MODE_MONITOR	6	// Passive monitor (listen only)
165 */
166 struct	setopmode_parm {
167 	u8	mode;
168 	u8	rsvd[3];
169 };
170 
171 /*
172  * Caller Mode: AP, Ad-HoC, Infra
173  * Notes: To ask RTL8711 performing site-survey
174  * Command-Event Mode
175  */
176 struct sitesurvey_parm {
177 	sint passive_mode;	/*active: 1, passive: 0 */
178 	sint bsslimit;	/* 1 ~ 48 */
179 	sint	ss_ssidlen;
180 	u8	ss_ssid[IW_ESSID_MAX_SIZE + 1];
181 };
182 
183 /*
184  * Caller Mode: Any
185  * Notes: To set the auth type of RTL8711. open/shared/802.1x
186  * Command Mode
187  */
188 struct setauth_parm {
189 	u8 mode;  /*0: legacy open, 1: legacy shared 2: 802.1x*/
190 	u8 _1x;   /*0: PSK, 1: TLS*/
191 	u8 rsvd[2];
192 };
193 
194 /*
195  * Caller Mode: Infra
196  * a. algorithm: wep40, wep104, tkip & aes
197  * b. keytype: grp key/unicast key
198  * c. key contents
199  *
200  * when shared key ==> keyid is the camid
201  * when 802.1x ==> keyid [0:1] ==> grp key
202  * when 802.1x ==> keyid > 2 ==> unicast key
203  */
204 struct setkey_parm {
205 	u8	algorithm;	/* encryption algorithm, could be none, wep40,
206 				 * TKIP, CCMP, wep104 */
207 	u8	keyid;
208 	u8	grpkey;		/* 1: this is the grpkey for 802.1x.
209 				 * 0: this is the unicast key for 802.1x */
210 	u8	key[16];	/* this could be 40 or 104 */
211 };
212 
213 /*
214  * When in AP or Ad-Hoc mode, this is used to
215  * allocate an sw/hw entry for a newly associated sta.
216  * Command
217  * when shared key ==> algorithm/keyid
218  */
219 struct set_stakey_parm {
220 	u8	addr[ETH_ALEN];
221 	u8	algorithm;
222 	u8	key[16];
223 };
224 
225 struct set_stakey_rsp {
226 	u8	addr[ETH_ALEN];
227 	u8	keyid;
228 	u8	rsvd;
229 };
230 
231 struct SetMacAddr_param {
232 	u8	MacAddr[ETH_ALEN];
233 };
234 
235 /*
236 Caller Ad-Hoc/AP
237 
238 Command -Rsp(AID == CAMID) mode
239 
240 This is to force fw to add an sta_data entry per driver's request.
241 
242 FW will write an cam entry associated with it.
243 
244 */
245 struct set_assocsta_parm {
246 	u8	addr[ETH_ALEN];
247 };
248 
249 struct set_assocsta_rsp {
250 	u8	cam_id;
251 	u8	rsvd[3];
252 };
253 
254 /*
255 	Caller Ad-Hoc/AP
256 
257 	Command mode
258 
259 	This is to force fw to del an sta_data entry per driver's request
260 
261 	FW will invalidate the cam entry associated with it.
262 
263 */
264 struct del_assocsta_parm {
265 	u8	addr[ETH_ALEN];
266 };
267 
268 /*
269 Caller Mode: AP/Ad-HoC(M)
270 
271 Notes: To notify fw that given staid has changed its power state
272 
273 Command Mode
274 
275 */
276 struct setstapwrstate_parm {
277 	u8	staid;
278 	u8	status;
279 	u8	hwaddr[6];
280 };
281 
282 /*
283 Caller Mode: Any
284 
285 Notes: To setup the basic rate of RTL8711
286 
287 Command Mode
288 
289 */
290 struct	setbasicrate_parm {
291 	u8	basicrates[NumRates];
292 };
293 
294 /*
295 Caller Mode: Any
296 
297 Notes: To read the current basic rate
298 
299 Command-Rsp Mode
300 
301 */
302 struct getbasicrate_parm {
303 	u32 rsvd;
304 };
305 
306 struct getbasicrate_rsp {
307 	u8 basicrates[NumRates];
308 };
309 
310 /*
311 Caller Mode: Any
312 
313 Notes: To setup the data rate of RTL8711
314 
315 Command Mode
316 
317 */
318 struct setdatarate_parm {
319 	u8	mac_id;
320 	u8	datarates[NumRates];
321 };
322 
323 enum _RT_CHANNEL_DOMAIN {
324 	RT_CHANNEL_DOMAIN_FCC = 0,
325 	RT_CHANNEL_DOMAIN_IC = 1,
326 	RT_CHANNEL_DOMAIN_ETSI = 2,
327 	RT_CHANNEL_DOMAIN_SPAIN = 3,
328 	RT_CHANNEL_DOMAIN_FRANCE = 4,
329 	RT_CHANNEL_DOMAIN_MKK = 5,
330 	RT_CHANNEL_DOMAIN_MKK1 = 6,
331 	RT_CHANNEL_DOMAIN_ISRAEL = 7,
332 	RT_CHANNEL_DOMAIN_TELEC = 8,
333 
334 	/* Be compatible with old channel plan. No good! */
335 	RT_CHANNEL_DOMAIN_MIC = 9,
336 	RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN = 10,
337 	RT_CHANNEL_DOMAIN_WORLD_WIDE_13 = 11,
338 	RT_CHANNEL_DOMAIN_TELEC_NETGEAR = 12,
339 
340 	RT_CHANNEL_DOMAIN_NCC = 13,
341 	RT_CHANNEL_DOMAIN_5G = 14,
342 	RT_CHANNEL_DOMAIN_5G_40M = 15,
343  /*===== Add new channel plan above this line===============*/
344 	RT_CHANNEL_DOMAIN_MAX,
345 };
346 
347 
348 struct SetChannelPlan_param {
349 	enum _RT_CHANNEL_DOMAIN ChannelPlan;
350 };
351 
352 /*
353 Caller Mode: Any
354 
355 Notes: To read the current data rate
356 
357 Command-Rsp Mode
358 
359 */
360 struct getdatarate_parm {
361 	u32 rsvd;
362 
363 };
364 struct getdatarate_rsp {
365 	u8 datarates[NumRates];
366 };
367 
368 
369 /*
370 Caller Mode: Any
371 AP: AP can use the info for the contents of beacon frame
372 Infra: STA can use the info when sitesurveying
373 Ad-HoC(M): Like AP
374 Ad-HoC(C): Like STA
375 
376 
377 Notes: To set the phy capability of the NIC
378 
379 Command Mode
380 
381 */
382 
383 /*
384 Caller Mode: Any
385 
386 Notes: To set the channel/modem/band
387 This command will be used when channel/modem/band is changed.
388 
389 Command Mode
390 
391 */
392 /*
393 Caller Mode: Any
394 
395 Notes: To get the current setting of channel/modem/band
396 
397 Command-Rsp Mode
398 
399 */
400 struct	getphy_rsp {
401 	u8	rfchannel;
402 	u8	modem;
403 };
404 
405 struct readBB_parm {
406 	u8	offset;
407 };
408 struct readBB_rsp {
409 	u8	value;
410 };
411 
412 struct readTSSI_parm {
413 	u8	offset;
414 };
415 struct readTSSI_rsp {
416 	u8	value;
417 };
418 
419 struct writeBB_parm {
420 	u8	offset;
421 	u8	value;
422 };
423 
424 struct writePTM_parm {
425 	u8	type;
426 };
427 
428 struct readRF_parm {
429 	u8	offset;
430 };
431 struct readRF_rsp {
432 	u32	value;
433 };
434 
435 struct writeRF_parm {
436 	u32	offset;
437 	u32	value;
438 };
439 
440 struct setrfintfs_parm {
441 	u8	rfintfs;
442 };
443 
444 struct getrfintfs_parm {
445 	u8	rfintfs;
446 };
447 
448 /*
449 	Notes: This command is used for H2C/C2H loopback testing
450 
451 	mac[0] == 0
452 	==> CMD mode, return H2C_SUCCESS.
453 	The following condition must be ture under CMD mode
454 		mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
455 		s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
456 		s2 == (b1 << 8 | b0);
457 
458 	mac[0] == 1
459 	==> CMD_RSP mode, return H2C_SUCCESS_RSP
460 
461 	The rsp layout shall be:
462 	rsp:			parm:
463 		mac[0]  =   mac[5];
464 		mac[1]  =   mac[4];
465 		mac[2]  =   mac[3];
466 		mac[3]  =   mac[2];
467 		mac[4]  =   mac[1];
468 		mac[5]  =   mac[0];
469 		s0		=   s1;
470 		s1		=   swap16(s0);
471 		w0		=	swap32(w1);
472 		b0		=	b1
473 		s2		=	s0 + s1
474 		b1		=	b0
475 		w1		=	w0
476 
477 	mac[0] ==	2
478 	==> CMD_EVENT mode, return	H2C_SUCCESS
479 	The event layout shall be:
480 	event:	     parm:
481 	mac[0]  =   mac[5];
482 	mac[1]  =   mac[4];
483 	mac[2]  =   event's sequence number, starting from 1 to parm's marc[3]
484 	mac[3]  =   mac[2];
485 	mac[4]  =   mac[1];
486 	mac[5]  =   mac[0];
487 	s0		=   swap16(s0) - event.mac[2];
488 	s1		=   s1 + event.mac[2];
489 	w0		=	swap32(w0);
490 	b0		=	b1
491 	s2		=	s0 + event.mac[2]
492 	b1		=	b0
493 	w1		=	swap32(w1) - event.mac[2];
494 
495 	parm->mac[3] is the total event counts that host requested.
496 
497 
498 	event will be the same with the cmd's param.
499 
500 */
501 
502 /* CMD param Formart for DRV INTERNAL CMD HDL*/
503 struct drvint_cmd_parm {
504 	int i_cid; /*internal cmd id*/
505 	int sz; /* buf sz*/
506 	unsigned char *pbuf;
507 };
508 
509 /*------------------- Below are used for RF/BB tunning ---------------------*/
510 
511 struct	setantenna_parm {
512 	u8	tx_antset;
513 	u8	rx_antset;
514 	u8	tx_antenna;
515 	u8	rx_antenna;
516 };
517 
518 struct	enrateadaptive_parm {
519 	u32	en;
520 };
521 
522 struct settxagctbl_parm {
523 	u32	txagc[MAX_RATES_LENGTH];
524 };
525 
526 struct gettxagctbl_parm {
527 	u32 rsvd;
528 };
529 struct gettxagctbl_rsp {
530 	u32	txagc[MAX_RATES_LENGTH];
531 };
532 
533 struct setagcctrl_parm {
534 	u32	agcctrl;	/* 0: pure hw, 1: fw */
535 };
536 
537 struct setssup_parm	{
538 	u32	ss_ForceUp[MAX_RATES_LENGTH];
539 };
540 
541 struct getssup_parm	{
542 	u32 rsvd;
543 };
544 struct getssup_rsp	{
545 	u8	ss_ForceUp[MAX_RATES_LENGTH];
546 };
547 
548 struct setssdlevel_parm	{
549 	u8	ss_DLevel[MAX_RATES_LENGTH];
550 };
551 
552 struct getssdlevel_parm	{
553 	u32 rsvd;
554 };
555 struct getssdlevel_rsp	{
556 	u8	ss_DLevel[MAX_RATES_LENGTH];
557 };
558 
559 struct setssulevel_parm	{
560 	u8	ss_ULevel[MAX_RATES_LENGTH];
561 };
562 
563 struct getssulevel_parm	{
564 	u32 rsvd;
565 };
566 struct getssulevel_rsp	{
567 	u8	ss_ULevel[MAX_RATES_LENGTH];
568 };
569 
570 struct	setcountjudge_parm {
571 	u8	count_judge[MAX_RATES_LENGTH];
572 };
573 
574 struct	getcountjudge_parm {
575 	u32 rsvd;
576 };
577 
578 struct	getcountjudge_rsp {
579 	u8	count_judge[MAX_RATES_LENGTH];
580 };
581 
582 struct setpwrmode_parm  {
583 	u8	mode;
584 	u8	flag_low_traffic_en;
585 	u8	flag_lpnav_en;
586 	u8	flag_rf_low_snr_en;
587 	u8	flag_dps_en; /* 1: dps, 0: 32k */
588 	u8	bcn_rx_en;
589 	u8	bcn_pass_cnt;	  /* fw report one beacon information to
590 				   * driver  when it receives bcn_pass_cnt
591 				   *  beacons. */
592 	u8	bcn_to;		  /* beacon TO (ms). ¡§=0¡¨ no limit.*/
593 	u16	bcn_itv;
594 	u8	app_itv; /* only for VOIP mode. */
595 	u8	awake_bcn_itv;
596 	u8	smart_ps;
597 	u8	bcn_pass_time;	/* unit: 100ms */
598 };
599 
600 struct setatim_parm {
601 	u8 op;   /*0: add, 1:del*/
602 	u8 txid; /* id of dest station.*/
603 };
604 
605 struct setratable_parm {
606 	u8 ss_ForceUp[NumRates];
607 	u8 ss_ULevel[NumRates];
608 	u8 ss_DLevel[NumRates];
609 	u8 count_judge[NumRates];
610 };
611 
612 struct getratable_parm {
613 	uint rsvd;
614 };
615 struct getratable_rsp {
616 	u8 ss_ForceUp[NumRates];
617 	u8 ss_ULevel[NumRates];
618 	u8 ss_DLevel[NumRates];
619 	u8 count_judge[NumRates];
620 };
621 
622 /*to get TX,RX retry count*/
623 struct gettxretrycnt_parm {
624 	unsigned int rsvd;
625 };
626 
627 struct gettxretrycnt_rsp {
628 	unsigned long tx_retrycnt;
629 };
630 
631 struct getrxretrycnt_parm {
632 	unsigned int rsvd;
633 };
634 
635 struct getrxretrycnt_rsp {
636 	unsigned long rx_retrycnt;
637 };
638 
639 /*to get BCNOK,BCNERR count*/
640 struct getbcnokcnt_parm {
641 	unsigned int rsvd;
642 };
643 
644 struct getbcnokcnt_rsp {
645 	unsigned long bcnokcnt;
646 };
647 
648 struct getbcnerrcnt_parm {
649 	unsigned int rsvd;
650 };
651 struct getbcnerrcnt_rsp {
652 	unsigned long bcnerrcnt;
653 };
654 
655 /* to get current TX power level*/
656 struct getcurtxpwrlevel_parm {
657 	unsigned int rsvd;
658 };
659 
660 struct getcurtxpwrlevel_rsp {
661 	unsigned short tx_power;
662 };
663 
664 /*dynamic on/off DIG*/
665 struct setdig_parm {
666 	unsigned char dig_on;	/* 1:on , 0:off */
667 };
668 
669 /*dynamic on/off RA*/
670 struct setra_parm {
671 	unsigned char ra_on;	/* 1:on , 0:off */
672 };
673 
674 struct setprobereqextraie_parm {
675 	unsigned char e_id;
676 	unsigned char ie_len;
677 	unsigned char ie[0];
678 };
679 
680 struct setassocreqextraie_parm {
681 	unsigned char e_id;
682 	unsigned char ie_len;
683 	unsigned char ie[0];
684 };
685 
686 struct setproberspextraie_parm {
687 	unsigned char e_id;
688 	unsigned char ie_len;
689 	unsigned char ie[0];
690 };
691 
692 struct setassocrspextraie_parm {
693 	unsigned char e_id;
694 	unsigned char ie_len;
695 	unsigned char ie[0];
696 };
697 
698 struct addBaReq_parm {
699 	unsigned int tid;
700 };
701 
702 /*H2C Handler index: 46 */
703 struct SetChannel_parm {
704 	u32 curr_ch;
705 };
706 
707 /*H2C Handler index: 61 */
708 struct DisconnectCtrlEx_param {
709 	/* MAXTIME = (2 * FirstStageTO) + (TryPktCnt * TryPktInterval) */
710 	unsigned char EnableDrvCtrl;
711 	unsigned char TryPktCnt;
712 	unsigned char TryPktInterval; /* Unit: ms */
713 	unsigned char rsvd;
714 	unsigned int  FirstStageTO; /* Unit: ms */
715 };
716 
717 #define GEN_CMD_CODE(cmd)	cmd ## _CMD_
718 
719 /*
720  * Result:
721  * 0x00: success
722  * 0x01: success, and check Response.
723  * 0x02: cmd ignored due to duplicated sequcne number
724  * 0x03: cmd dropped due to invalid cmd code
725  * 0x04: reserved.
726  */
727 
728 #define H2C_RSP_OFFSET			512
729 #define H2C_SUCCESS			0x00
730 #define H2C_SUCCESS_RSP			0x01
731 #define H2C_DUPLICATED			0x02
732 #define H2C_DROPPED			0x03
733 #define H2C_PARAMETERS_ERROR		0x04
734 #define H2C_REJECTED			0x05
735 #define H2C_CMD_OVERFLOW		0x06
736 #define H2C_RESERVED			0x07
737 
738 u8 r8712_setMacAddr_cmd(struct _adapter *padapter, u8 *mac_addr);
739 u8 r8712_setassocsta_cmd(struct _adapter *padapter, u8 *mac_addr);
740 u8 r8712_sitesurvey_cmd(struct _adapter *padapter,
741 			struct ndis_802_11_ssid *pssid);
742 u8 r8712_createbss_cmd(struct _adapter *padapter);
743 u8 r8712_setstakey_cmd(struct _adapter *padapter, u8 *psta, u8 unicast_key);
744 u8 r8712_joinbss_cmd(struct _adapter *padapter,
745 		     struct wlan_network *pnetwork);
746 u8 r8712_disassoc_cmd(struct _adapter *padapter);
747 u8 r8712_setopmode_cmd(struct _adapter *padapter,
748 		 enum NDIS_802_11_NETWORK_INFRASTRUCTURE networktype);
749 u8 r8712_setdatarate_cmd(struct _adapter *padapter, u8 *rateset);
750 u8 r8712_set_chplan_cmd(struct _adapter  *padapter, int chplan);
751 u8 r8712_setbasicrate_cmd(struct _adapter *padapter, u8 *rateset);
752 u8 r8712_getrfreg_cmd(struct _adapter *padapter, u8 offset, u8 * pval);
753 u8 r8712_setrfintfs_cmd(struct _adapter *padapter, u8 mode);
754 u8 r8712_setrfreg_cmd(struct _adapter  *padapter, u8 offset, u32 val);
755 u8 r8712_setrttbl_cmd(struct _adapter  *padapter,
756 		      struct setratable_parm *prate_table);
757 u8 r8712_gettssi_cmd(struct _adapter  *padapter, u8 offset, u8 *pval);
758 u8 r8712_setptm_cmd(struct _adapter *padapter, u8 type);
759 u8 r8712_setfwdig_cmd(struct _adapter *padapter, u8 type);
760 u8 r8712_setfwra_cmd(struct _adapter *padapter, u8 type);
761 u8 r8712_addbareq_cmd(struct _adapter *padapter, u8 tid);
762 u8 r8712_wdg_wk_cmd(struct _adapter *padapter);
763 void r8712_survey_cmd_callback(struct _adapter  *padapter,
764 			       struct cmd_obj *pcmd);
765 void r8712_disassoc_cmd_callback(struct _adapter  *padapter,
766 				 struct cmd_obj *pcmd);
767 void r8712_joinbss_cmd_callback(struct _adapter  *padapter,
768 				struct cmd_obj *pcmd);
769 void r8712_createbss_cmd_callback(struct _adapter *padapter,
770 				  struct cmd_obj *pcmd);
771 void r8712_getbbrfreg_cmdrsp_callback(struct _adapter *padapter,
772 				      struct cmd_obj *pcmd);
773 void r8712_readtssi_cmdrsp_callback(struct _adapter *padapter,
774 				struct cmd_obj *pcmd);
775 void r8712_setstaKey_cmdrsp_callback(struct _adapter  *padapter,
776 				     struct cmd_obj *pcmd);
777 void r8712_setassocsta_cmdrsp_callback(struct _adapter  *padapter,
778 				       struct cmd_obj *pcmd);
779 u8 r8712_disconnectCtrlEx_cmd(struct _adapter *adapter, u32 enableDrvCtrl,
780 			u32 tryPktCnt, u32 tryPktInterval, u32 firstStageTO);
781 
782 struct _cmd_callback {
783 	u32	cmd_code;
784 	void (*callback)(struct _adapter  *padapter, struct cmd_obj *cmd);
785 };
786 
787 #include "rtl8712_cmd.h"
788 
789 #endif /* _CMD_H_ */
790 
791