/linux-3.4.99/drivers/tty/serial/ |
D | kgdboc.c | 29 static int configured = -1; variable 149 if (configured == 1) in cleanup_kgdboc() 201 configured = 1; in configure_kgdboc() 207 configured = 0; in configure_kgdboc() 216 if (configured == 1) in init_kgdboc() 248 if (configured < 0) { in param_set_kgdboc_var() 265 if (configured == 1) in param_set_kgdboc_var()
|
/linux-3.4.99/drivers/char/mwave/ |
D | README | 20 irq used by the dsp to be configured. 25 io range used by the dsp to be configured. 30 irq used by the mwave uart to be configured. 35 io range used by the mwave uart to be configured.
|
/linux-3.4.99/arch/arm/mach-spear6xx/ |
D | Kconfig | 9 bool "SPEAr600 generic board configured via device-tree" 13 Supports ST SPEAr600 boards configured via the device-tree
|
/linux-3.4.99/Documentation/serial/ |
D | digiepca.txt | 29 This driver may be configured via LILO. For users who have already configured 31 settings. Multiple boards may be configured by issuing multiple LILO command 37 PCI boards are auto-detected and configured by the driver. PCI boards will 53 I/O Port where card is configured (in HEX if using string identifiers), 56 NOTE : PCI boards are auto-detected and configured. Do not attempt to
|
/linux-3.4.99/drivers/misc/ |
D | kgdbts.c | 157 static int configured = -1; variable 197 if (configured) in kgdbts_unreg_thread() 199 configured = 0; in kgdbts_unreg_thread() 1053 configured = 0; in kgdbts_run_tests() 1090 configured = 0; in configure_kgdbts() 1093 configured = 1; in configure_kgdbts() 1100 configured = 0; in configure_kgdbts() 1108 if (configured == 1) in init_kgdbts() 1140 if (configured < 0) { in param_set_kgdbts_var() 1145 if (configured == 1) { in param_set_kgdbts_var()
|
/linux-3.4.99/sound/soc/blackfin/ |
D | bf5xx-i2s.c | 51 int configured; member 132 if (!bf5xx_i2s->configured) { in bf5xx_i2s_hw_params() 141 bf5xx_i2s->configured = 1; in bf5xx_i2s_hw_params() 169 bf5xx_i2s->configured = 0; in bf5xx_i2s_shutdown()
|
D | bf5xx-tdm.c | 104 if (!bf5xx_tdm->configured) { in bf5xx_tdm_hw_params() 127 bf5xx_tdm->configured = 1; in bf5xx_tdm_hw_params() 141 bf5xx_tdm->configured = 0; in bf5xx_tdm_shutdown()
|
D | bf5xx-tdm.h | 20 int configured; member
|
/linux-3.4.99/arch/s390/include/asm/ |
D | sclp.h | 19 u8 configured[SCLP_CHP_INFO_MASK_SIZE]; member 38 unsigned int configured; member
|
/linux-3.4.99/arch/arm/mach-omap1/include/mach/ |
D | debug-macro.S | 39 cmp \rp, #0 @ is port configured? 41 bne 100f @ already configured 49 10: cmp \rp, #0 @ no port configured?
|
/linux-3.4.99/Documentation/arm/SH-Mobile/ |
D | zboot-rom-sdhi.txt | 14 boot mode which is configured using the following jumper settings. 22 As such S1 and S33 also need to be configured as per 41 writing they are not the same as partitions that are typically configured
|
/linux-3.4.99/Documentation/isdn/ |
D | README.icn | 17 configured with the switches. 20 The base address of the window can be configured when loading 70 The ICN driver can be configured using the commandline-feature while 93 The D-channel protocol is configured by loading different firmware 99 The module icn.o can be configured during "insmod'ing" it by 116 The D-channel protocol is configured by loading different firmware
|
D | README.act2000 | 34 IRQ is configured by software. Possible values are: 44 The ACT2000 driver can be configured using the commandline-feature while 69 during runtime. The D-channel protocol is configured by the "dproto" 75 The module act2000.o can be configured during modprobe (insmod) by
|
/linux-3.4.99/include/linux/ |
D | if_frad.h | 154 int configured; member 170 int configured; /* has this device been configured */ member
|
/linux-3.4.99/arch/arm/mach-davinci/include/mach/ |
D | debug-macro.S | 40 cmp \rp, #0 @ is port configured? 42 bne 100f @ already configured
|
/linux-3.4.99/Documentation/arm/Samsung-S3C24XX/ |
D | USB-Host.txt | 29 Once these options are configured, the standard set of USB device 30 drivers can be configured and used. 46 port is configured to be connected to the OHCI core.
|
/linux-3.4.99/arch/arm/mach-omap2/include/mach/ |
D | debug-macro.S | 42 cmp \rp, #0 @ is port configured? 44 bne 100f @ already configured 53 cmp \rp, #0 @ no port configured?
|
/linux-3.4.99/arch/mips/sgi-ip27/ |
D | Kconfig | 9 The nodes of Origin, Onyx, Fuel and Tezro systems can be configured 18 The nodes of Origin, Onyx, Fuel and Tezro systems can be configured
|
/linux-3.4.99/Documentation/networking/ |
D | scaling.txt | 46 be configured from ethtool (--config-ntuple). 142 explicitly configured. The list of CPUs to which RPS may forward traffic 143 can be configured for each receive queue using a sysfs file entry: 160 For a multi-queue system, if RSS is configured so that a hardware 240 configured. The number of entries in the global flow table is set through: 258 would normally be configured to the same value as rps_sock_flow_entries. 260 configured as rps_sock_flow_entries / N, where N is the number of 262 are 16 configured receive queues, rps_flow_cnt for each queue might be 263 configured as 2048. 298 configured for each receive queue by the driver, so no additional [all …]
|
/linux-3.4.99/Documentation/hwmon/ |
D | ltc4245 | 88 If you have NOT configured the driver to sample all GPIO pins as analog 93 If you have configured the driver to sample all GPIO pins as analog voltages, 98 The LTC4245 chip can be configured to sample all GPIO pins with two methods:
|
D | jc42 | 72 and critical temperature can be configured. There are alarms for high, low, 76 Per JC 42.4 specification, the hysteresis threshold can be configured to 0, 1.5, 82 If the BIOS has configured the sensor for automatic temperature management, it
|
/linux-3.4.99/Documentation/sound/oss/ |
D | OPL3 | 6 configured
|
D | PSS | 9 pss_io. The I/O base the PSS card is configured at (normally 0x220 32 synthesizer parts are not configured.
|
/linux-3.4.99/Documentation/devicetree/bindings/sound/ |
D | wm8753.txt | 3 This device supports both I2C and SPI (configured with pin strapping
|
D | wm8510.txt | 3 This device supports both I2C and SPI (configured with pin strapping
|