1 /****************************************************************************** 2 * 3 * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of version 2 of the GNU General Public License as 7 * published by the Free Software Foundation. 8 * 9 * This program is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 * more details. 13 * 14 * You should have received a copy of the GNU General Public License along with 15 * this program; if not, write to the Free Software Foundation, Inc., 16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA 17 * 18 * Modifications for inclusion into the Linux staging tree are 19 * Copyright(c) 2010 Larry Finger. All rights reserved. 20 * 21 * Contact information: 22 * WLAN FAE <wlanfae@realtek.com> 23 * Larry Finger <Larry.Finger@lwfinger.net> 24 * 25 ******************************************************************************/ 26 #ifndef __RTL871X_CMD_H_ 27 #define __RTL871X_CMD_H_ 28 29 #include "wlan_bssdef.h" 30 #include "rtl871x_rf.h" 31 #define C2H_MEM_SZ (16*1024) 32 33 #include "osdep_service.h" 34 #include "ieee80211.h" 35 36 #define FREE_CMDOBJ_SZ 128 37 #define MAX_CMDSZ 512 38 #define MAX_RSPSZ 512 39 #define MAX_EVTSZ 1024 40 #define CMDBUFF_ALIGN_SZ 512 41 42 struct cmd_obj { 43 u16 cmdcode; 44 u8 res; 45 u8 *parmbuf; 46 u32 cmdsz; 47 u8 *rsp; 48 u32 rspsz; 49 struct list_head list; 50 }; 51 52 struct cmd_priv { 53 struct semaphore cmd_queue_sema; 54 struct semaphore terminate_cmdthread_sema; 55 struct __queue cmd_queue; 56 u8 cmd_seq; 57 u8 *cmd_buf; /*shall be non-paged, and 4 bytes aligned*/ 58 u8 *cmd_allocated_buf; 59 u8 *rsp_buf; /*shall be non-paged, and 4 bytes aligned*/ 60 u8 *rsp_allocated_buf; 61 u32 cmd_issued_cnt; 62 u32 cmd_done_cnt; 63 u32 rsp_cnt; 64 struct _adapter *padapter; 65 }; 66 67 struct evt_obj { 68 u16 evtcode; 69 u8 res; 70 u8 *parmbuf; 71 u32 evtsz; 72 struct list_head list; 73 }; 74 75 struct evt_priv { 76 struct __queue evt_queue; 77 u8 event_seq; 78 u8 *evt_buf; /*shall be non-paged, and 4 bytes aligned*/ 79 u8 *evt_allocated_buf; 80 u32 evt_done_cnt; 81 struct tasklet_struct event_tasklet; 82 }; 83 84 #define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \ 85 do {\ 86 _init_listhead(&pcmd->list);\ 87 pcmd->cmdcode = code;\ 88 pcmd->parmbuf = (u8 *)(pparm);\ 89 pcmd->cmdsz = sizeof(*pparm);\ 90 pcmd->rsp = NULL;\ 91 pcmd->rspsz = 0;\ 92 } while (0) 93 94 u32 r8712_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj); 95 u32 r8712_enqueue_cmd_ex(struct cmd_priv *pcmdpriv, struct cmd_obj *obj); 96 struct cmd_obj *r8712_dequeue_cmd(struct __queue *queue); 97 void r8712_free_cmd_obj(struct cmd_obj *pcmd); 98 int r8712_cmd_thread(void *context); 99 u32 r8712_init_cmd_priv(struct cmd_priv *pcmdpriv); 100 void r8712_free_cmd_priv(struct cmd_priv *pcmdpriv); 101 u32 r8712_init_evt_priv(struct evt_priv *pevtpriv); 102 void r8712_free_evt_priv(struct evt_priv *pevtpriv); 103 104 enum rtl871x_drvint_cid { 105 NONE_WK_CID, 106 WDG_WK_CID, 107 MAX_WK_CID 108 }; 109 110 enum RFINTFS { 111 SWSI, 112 HWSI, 113 HWPI, 114 }; 115 116 /* 117 * Caller Mode: Infra, Ad-HoC(C) 118 * Notes: To enter USB suspend mode 119 * Command Mode 120 */ 121 struct usb_suspend_parm { 122 u32 action; /* 1: sleep, 0:resume */ 123 }; 124 125 /* 126 * Caller Mode: Infra, Ad-Hoc 127 * Notes: To join the specified bss 128 * Command Event Mode 129 */ 130 struct joinbss_parm { 131 struct ndis_wlan_bssid_ex network; 132 }; 133 134 /* 135 * Caller Mode: Infra, Ad-HoC(C) 136 * Notes: To disconnect the current associated BSS 137 * Command Mode 138 */ 139 struct disconnect_parm { 140 u32 rsvd; 141 }; 142 143 /* 144 * Caller Mode: AP, Ad-HoC(M) 145 * Notes: To create a BSS 146 * Command Mode 147 */ 148 struct createbss_parm { 149 struct ndis_wlan_bssid_ex network; 150 }; 151 152 /* 153 * Caller Mode: AP, Ad-HoC, Infra 154 * Notes: To set the NIC mode of RTL8711 155 * Command Mode 156 * The definition of mode: 157 * 158 * #define IW_MODE_AUTO 0 // Let the driver decides which AP to join 159 * #define IW_MODE_ADHOC 1 // Single cell network (Ad-Hoc Clients) 160 * #define IW_MODE_INFRA 2 // Multi cell network, roaming, .. 161 * #define IW_MODE_MASTER 3 // Synchronisation master or AP 162 * #define IW_MODE_REPEAT 4 // Wireless Repeater (forwarder) 163 * #define IW_MODE_SECOND 5 // Secondary master/repeater (backup) 164 * #define IW_MODE_MONITOR 6 // Passive monitor (listen only) 165 */ 166 struct setopmode_parm { 167 u8 mode; 168 u8 rsvd[3]; 169 }; 170 171 /* 172 * Caller Mode: AP, Ad-HoC, Infra 173 * Notes: To ask RTL8711 performing site-survey 174 * Command-Event Mode 175 */ 176 struct sitesurvey_parm { 177 sint passive_mode; /*active: 1, passive: 0 */ 178 sint bsslimit; /* 1 ~ 48 */ 179 sint ss_ssidlen; 180 u8 ss_ssid[IW_ESSID_MAX_SIZE + 1]; 181 }; 182 183 /* 184 * Caller Mode: Any 185 * Notes: To set the auth type of RTL8711. open/shared/802.1x 186 * Command Mode 187 */ 188 struct setauth_parm { 189 u8 mode; /*0: legacy open, 1: legacy shared 2: 802.1x*/ 190 u8 _1x; /*0: PSK, 1: TLS*/ 191 u8 rsvd[2]; 192 }; 193 194 /* 195 * Caller Mode: Infra 196 * a. algorithm: wep40, wep104, tkip & aes 197 * b. keytype: grp key/unicast key 198 * c. key contents 199 * 200 * when shared key ==> keyid is the camid 201 * when 802.1x ==> keyid [0:1] ==> grp key 202 * when 802.1x ==> keyid > 2 ==> unicast key 203 */ 204 struct setkey_parm { 205 u8 algorithm; /* encryption algorithm, could be none, wep40, 206 * TKIP, CCMP, wep104 */ 207 u8 keyid; 208 u8 grpkey; /* 1: this is the grpkey for 802.1x. 209 * 0: this is the unicast key for 802.1x */ 210 u8 key[16]; /* this could be 40 or 104 */ 211 }; 212 213 /* 214 * When in AP or Ad-Hoc mode, this is used to 215 * allocate an sw/hw entry for a newly associated sta. 216 * Command 217 * when shared key ==> algorithm/keyid 218 */ 219 struct set_stakey_parm { 220 u8 addr[ETH_ALEN]; 221 u8 algorithm; 222 u8 key[16]; 223 }; 224 225 struct set_stakey_rsp { 226 u8 addr[ETH_ALEN]; 227 u8 keyid; 228 u8 rsvd; 229 }; 230 231 struct SetMacAddr_param { 232 u8 MacAddr[ETH_ALEN]; 233 }; 234 235 /* 236 Caller Ad-Hoc/AP 237 238 Command -Rsp(AID == CAMID) mode 239 240 This is to force fw to add an sta_data entry per driver's request. 241 242 FW will write an cam entry associated with it. 243 244 */ 245 struct set_assocsta_parm { 246 u8 addr[ETH_ALEN]; 247 }; 248 249 struct set_assocsta_rsp { 250 u8 cam_id; 251 u8 rsvd[3]; 252 }; 253 254 /* 255 Caller Ad-Hoc/AP 256 257 Command mode 258 259 This is to force fw to del an sta_data entry per driver's request 260 261 FW will invalidate the cam entry associated with it. 262 263 */ 264 struct del_assocsta_parm { 265 u8 addr[ETH_ALEN]; 266 }; 267 268 /* 269 Caller Mode: AP/Ad-HoC(M) 270 271 Notes: To notify fw that given staid has changed its power state 272 273 Command Mode 274 275 */ 276 struct setstapwrstate_parm { 277 u8 staid; 278 u8 status; 279 u8 hwaddr[6]; 280 }; 281 282 /* 283 Caller Mode: Any 284 285 Notes: To setup the basic rate of RTL8711 286 287 Command Mode 288 289 */ 290 struct setbasicrate_parm { 291 u8 basicrates[NumRates]; 292 }; 293 294 /* 295 Caller Mode: Any 296 297 Notes: To read the current basic rate 298 299 Command-Rsp Mode 300 301 */ 302 struct getbasicrate_parm { 303 u32 rsvd; 304 }; 305 306 struct getbasicrate_rsp { 307 u8 basicrates[NumRates]; 308 }; 309 310 /* 311 Caller Mode: Any 312 313 Notes: To setup the data rate of RTL8711 314 315 Command Mode 316 317 */ 318 struct setdatarate_parm { 319 u8 mac_id; 320 u8 datarates[NumRates]; 321 }; 322 323 enum _RT_CHANNEL_DOMAIN { 324 RT_CHANNEL_DOMAIN_FCC = 0, 325 RT_CHANNEL_DOMAIN_IC = 1, 326 RT_CHANNEL_DOMAIN_ETSI = 2, 327 RT_CHANNEL_DOMAIN_SPAIN = 3, 328 RT_CHANNEL_DOMAIN_FRANCE = 4, 329 RT_CHANNEL_DOMAIN_MKK = 5, 330 RT_CHANNEL_DOMAIN_MKK1 = 6, 331 RT_CHANNEL_DOMAIN_ISRAEL = 7, 332 RT_CHANNEL_DOMAIN_TELEC = 8, 333 334 /* Be compatible with old channel plan. No good! */ 335 RT_CHANNEL_DOMAIN_MIC = 9, 336 RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN = 10, 337 RT_CHANNEL_DOMAIN_WORLD_WIDE_13 = 11, 338 RT_CHANNEL_DOMAIN_TELEC_NETGEAR = 12, 339 340 RT_CHANNEL_DOMAIN_NCC = 13, 341 RT_CHANNEL_DOMAIN_5G = 14, 342 RT_CHANNEL_DOMAIN_5G_40M = 15, 343 /*===== Add new channel plan above this line===============*/ 344 RT_CHANNEL_DOMAIN_MAX, 345 }; 346 347 348 struct SetChannelPlan_param { 349 enum _RT_CHANNEL_DOMAIN ChannelPlan; 350 }; 351 352 /* 353 Caller Mode: Any 354 355 Notes: To read the current data rate 356 357 Command-Rsp Mode 358 359 */ 360 struct getdatarate_parm { 361 u32 rsvd; 362 363 }; 364 struct getdatarate_rsp { 365 u8 datarates[NumRates]; 366 }; 367 368 369 /* 370 Caller Mode: Any 371 AP: AP can use the info for the contents of beacon frame 372 Infra: STA can use the info when sitesurveying 373 Ad-HoC(M): Like AP 374 Ad-HoC(C): Like STA 375 376 377 Notes: To set the phy capability of the NIC 378 379 Command Mode 380 381 */ 382 383 /* 384 Caller Mode: Any 385 386 Notes: To set the channel/modem/band 387 This command will be used when channel/modem/band is changed. 388 389 Command Mode 390 391 */ 392 /* 393 Caller Mode: Any 394 395 Notes: To get the current setting of channel/modem/band 396 397 Command-Rsp Mode 398 399 */ 400 struct getphy_rsp { 401 u8 rfchannel; 402 u8 modem; 403 }; 404 405 struct readBB_parm { 406 u8 offset; 407 }; 408 struct readBB_rsp { 409 u8 value; 410 }; 411 412 struct readTSSI_parm { 413 u8 offset; 414 }; 415 struct readTSSI_rsp { 416 u8 value; 417 }; 418 419 struct writeBB_parm { 420 u8 offset; 421 u8 value; 422 }; 423 424 struct writePTM_parm { 425 u8 type; 426 }; 427 428 struct readRF_parm { 429 u8 offset; 430 }; 431 struct readRF_rsp { 432 u32 value; 433 }; 434 435 struct writeRF_parm { 436 u32 offset; 437 u32 value; 438 }; 439 440 struct setrfintfs_parm { 441 u8 rfintfs; 442 }; 443 444 struct getrfintfs_parm { 445 u8 rfintfs; 446 }; 447 448 /* 449 Notes: This command is used for H2C/C2H loopback testing 450 451 mac[0] == 0 452 ==> CMD mode, return H2C_SUCCESS. 453 The following condition must be ture under CMD mode 454 mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0; 455 s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7; 456 s2 == (b1 << 8 | b0); 457 458 mac[0] == 1 459 ==> CMD_RSP mode, return H2C_SUCCESS_RSP 460 461 The rsp layout shall be: 462 rsp: parm: 463 mac[0] = mac[5]; 464 mac[1] = mac[4]; 465 mac[2] = mac[3]; 466 mac[3] = mac[2]; 467 mac[4] = mac[1]; 468 mac[5] = mac[0]; 469 s0 = s1; 470 s1 = swap16(s0); 471 w0 = swap32(w1); 472 b0 = b1 473 s2 = s0 + s1 474 b1 = b0 475 w1 = w0 476 477 mac[0] == 2 478 ==> CMD_EVENT mode, return H2C_SUCCESS 479 The event layout shall be: 480 event: parm: 481 mac[0] = mac[5]; 482 mac[1] = mac[4]; 483 mac[2] = event's sequence number, starting from 1 to parm's marc[3] 484 mac[3] = mac[2]; 485 mac[4] = mac[1]; 486 mac[5] = mac[0]; 487 s0 = swap16(s0) - event.mac[2]; 488 s1 = s1 + event.mac[2]; 489 w0 = swap32(w0); 490 b0 = b1 491 s2 = s0 + event.mac[2] 492 b1 = b0 493 w1 = swap32(w1) - event.mac[2]; 494 495 parm->mac[3] is the total event counts that host requested. 496 497 498 event will be the same with the cmd's param. 499 500 */ 501 502 /* CMD param Formart for DRV INTERNAL CMD HDL*/ 503 struct drvint_cmd_parm { 504 int i_cid; /*internal cmd id*/ 505 int sz; /* buf sz*/ 506 unsigned char *pbuf; 507 }; 508 509 /*------------------- Below are used for RF/BB tunning ---------------------*/ 510 511 struct setantenna_parm { 512 u8 tx_antset; 513 u8 rx_antset; 514 u8 tx_antenna; 515 u8 rx_antenna; 516 }; 517 518 struct enrateadaptive_parm { 519 u32 en; 520 }; 521 522 struct settxagctbl_parm { 523 u32 txagc[MAX_RATES_LENGTH]; 524 }; 525 526 struct gettxagctbl_parm { 527 u32 rsvd; 528 }; 529 struct gettxagctbl_rsp { 530 u32 txagc[MAX_RATES_LENGTH]; 531 }; 532 533 struct setagcctrl_parm { 534 u32 agcctrl; /* 0: pure hw, 1: fw */ 535 }; 536 537 struct setssup_parm { 538 u32 ss_ForceUp[MAX_RATES_LENGTH]; 539 }; 540 541 struct getssup_parm { 542 u32 rsvd; 543 }; 544 struct getssup_rsp { 545 u8 ss_ForceUp[MAX_RATES_LENGTH]; 546 }; 547 548 struct setssdlevel_parm { 549 u8 ss_DLevel[MAX_RATES_LENGTH]; 550 }; 551 552 struct getssdlevel_parm { 553 u32 rsvd; 554 }; 555 struct getssdlevel_rsp { 556 u8 ss_DLevel[MAX_RATES_LENGTH]; 557 }; 558 559 struct setssulevel_parm { 560 u8 ss_ULevel[MAX_RATES_LENGTH]; 561 }; 562 563 struct getssulevel_parm { 564 u32 rsvd; 565 }; 566 struct getssulevel_rsp { 567 u8 ss_ULevel[MAX_RATES_LENGTH]; 568 }; 569 570 struct setcountjudge_parm { 571 u8 count_judge[MAX_RATES_LENGTH]; 572 }; 573 574 struct getcountjudge_parm { 575 u32 rsvd; 576 }; 577 578 struct getcountjudge_rsp { 579 u8 count_judge[MAX_RATES_LENGTH]; 580 }; 581 582 struct setpwrmode_parm { 583 u8 mode; 584 u8 flag_low_traffic_en; 585 u8 flag_lpnav_en; 586 u8 flag_rf_low_snr_en; 587 u8 flag_dps_en; /* 1: dps, 0: 32k */ 588 u8 bcn_rx_en; 589 u8 bcn_pass_cnt; /* fw report one beacon information to 590 * driver when it receives bcn_pass_cnt 591 * beacons. */ 592 u8 bcn_to; /* beacon TO (ms). ¡§=0¡¨ no limit.*/ 593 u16 bcn_itv; 594 u8 app_itv; /* only for VOIP mode. */ 595 u8 awake_bcn_itv; 596 u8 smart_ps; 597 u8 bcn_pass_time; /* unit: 100ms */ 598 }; 599 600 struct setatim_parm { 601 u8 op; /*0: add, 1:del*/ 602 u8 txid; /* id of dest station.*/ 603 }; 604 605 struct setratable_parm { 606 u8 ss_ForceUp[NumRates]; 607 u8 ss_ULevel[NumRates]; 608 u8 ss_DLevel[NumRates]; 609 u8 count_judge[NumRates]; 610 }; 611 612 struct getratable_parm { 613 uint rsvd; 614 }; 615 struct getratable_rsp { 616 u8 ss_ForceUp[NumRates]; 617 u8 ss_ULevel[NumRates]; 618 u8 ss_DLevel[NumRates]; 619 u8 count_judge[NumRates]; 620 }; 621 622 /*to get TX,RX retry count*/ 623 struct gettxretrycnt_parm { 624 unsigned int rsvd; 625 }; 626 627 struct gettxretrycnt_rsp { 628 unsigned long tx_retrycnt; 629 }; 630 631 struct getrxretrycnt_parm { 632 unsigned int rsvd; 633 }; 634 635 struct getrxretrycnt_rsp { 636 unsigned long rx_retrycnt; 637 }; 638 639 /*to get BCNOK,BCNERR count*/ 640 struct getbcnokcnt_parm { 641 unsigned int rsvd; 642 }; 643 644 struct getbcnokcnt_rsp { 645 unsigned long bcnokcnt; 646 }; 647 648 struct getbcnerrcnt_parm { 649 unsigned int rsvd; 650 }; 651 struct getbcnerrcnt_rsp { 652 unsigned long bcnerrcnt; 653 }; 654 655 /* to get current TX power level*/ 656 struct getcurtxpwrlevel_parm { 657 unsigned int rsvd; 658 }; 659 660 struct getcurtxpwrlevel_rsp { 661 unsigned short tx_power; 662 }; 663 664 /*dynamic on/off DIG*/ 665 struct setdig_parm { 666 unsigned char dig_on; /* 1:on , 0:off */ 667 }; 668 669 /*dynamic on/off RA*/ 670 struct setra_parm { 671 unsigned char ra_on; /* 1:on , 0:off */ 672 }; 673 674 struct setprobereqextraie_parm { 675 unsigned char e_id; 676 unsigned char ie_len; 677 unsigned char ie[0]; 678 }; 679 680 struct setassocreqextraie_parm { 681 unsigned char e_id; 682 unsigned char ie_len; 683 unsigned char ie[0]; 684 }; 685 686 struct setproberspextraie_parm { 687 unsigned char e_id; 688 unsigned char ie_len; 689 unsigned char ie[0]; 690 }; 691 692 struct setassocrspextraie_parm { 693 unsigned char e_id; 694 unsigned char ie_len; 695 unsigned char ie[0]; 696 }; 697 698 struct addBaReq_parm { 699 unsigned int tid; 700 }; 701 702 /*H2C Handler index: 46 */ 703 struct SetChannel_parm { 704 u32 curr_ch; 705 }; 706 707 /*H2C Handler index: 61 */ 708 struct DisconnectCtrlEx_param { 709 /* MAXTIME = (2 * FirstStageTO) + (TryPktCnt * TryPktInterval) */ 710 unsigned char EnableDrvCtrl; 711 unsigned char TryPktCnt; 712 unsigned char TryPktInterval; /* Unit: ms */ 713 unsigned char rsvd; 714 unsigned int FirstStageTO; /* Unit: ms */ 715 }; 716 717 #define GEN_CMD_CODE(cmd) cmd ## _CMD_ 718 719 /* 720 * Result: 721 * 0x00: success 722 * 0x01: success, and check Response. 723 * 0x02: cmd ignored due to duplicated sequcne number 724 * 0x03: cmd dropped due to invalid cmd code 725 * 0x04: reserved. 726 */ 727 728 #define H2C_RSP_OFFSET 512 729 #define H2C_SUCCESS 0x00 730 #define H2C_SUCCESS_RSP 0x01 731 #define H2C_DUPLICATED 0x02 732 #define H2C_DROPPED 0x03 733 #define H2C_PARAMETERS_ERROR 0x04 734 #define H2C_REJECTED 0x05 735 #define H2C_CMD_OVERFLOW 0x06 736 #define H2C_RESERVED 0x07 737 738 u8 r8712_setMacAddr_cmd(struct _adapter *padapter, u8 *mac_addr); 739 u8 r8712_setassocsta_cmd(struct _adapter *padapter, u8 *mac_addr); 740 u8 r8712_sitesurvey_cmd(struct _adapter *padapter, 741 struct ndis_802_11_ssid *pssid); 742 u8 r8712_createbss_cmd(struct _adapter *padapter); 743 u8 r8712_setstakey_cmd(struct _adapter *padapter, u8 *psta, u8 unicast_key); 744 u8 r8712_joinbss_cmd(struct _adapter *padapter, 745 struct wlan_network *pnetwork); 746 u8 r8712_disassoc_cmd(struct _adapter *padapter); 747 u8 r8712_setopmode_cmd(struct _adapter *padapter, 748 enum NDIS_802_11_NETWORK_INFRASTRUCTURE networktype); 749 u8 r8712_setdatarate_cmd(struct _adapter *padapter, u8 *rateset); 750 u8 r8712_set_chplan_cmd(struct _adapter *padapter, int chplan); 751 u8 r8712_setbasicrate_cmd(struct _adapter *padapter, u8 *rateset); 752 u8 r8712_getrfreg_cmd(struct _adapter *padapter, u8 offset, u8 * pval); 753 u8 r8712_setrfintfs_cmd(struct _adapter *padapter, u8 mode); 754 u8 r8712_setrfreg_cmd(struct _adapter *padapter, u8 offset, u32 val); 755 u8 r8712_setrttbl_cmd(struct _adapter *padapter, 756 struct setratable_parm *prate_table); 757 u8 r8712_gettssi_cmd(struct _adapter *padapter, u8 offset, u8 *pval); 758 u8 r8712_setptm_cmd(struct _adapter *padapter, u8 type); 759 u8 r8712_setfwdig_cmd(struct _adapter *padapter, u8 type); 760 u8 r8712_setfwra_cmd(struct _adapter *padapter, u8 type); 761 u8 r8712_addbareq_cmd(struct _adapter *padapter, u8 tid); 762 u8 r8712_wdg_wk_cmd(struct _adapter *padapter); 763 void r8712_survey_cmd_callback(struct _adapter *padapter, 764 struct cmd_obj *pcmd); 765 void r8712_disassoc_cmd_callback(struct _adapter *padapter, 766 struct cmd_obj *pcmd); 767 void r8712_joinbss_cmd_callback(struct _adapter *padapter, 768 struct cmd_obj *pcmd); 769 void r8712_createbss_cmd_callback(struct _adapter *padapter, 770 struct cmd_obj *pcmd); 771 void r8712_getbbrfreg_cmdrsp_callback(struct _adapter *padapter, 772 struct cmd_obj *pcmd); 773 void r8712_readtssi_cmdrsp_callback(struct _adapter *padapter, 774 struct cmd_obj *pcmd); 775 void r8712_setstaKey_cmdrsp_callback(struct _adapter *padapter, 776 struct cmd_obj *pcmd); 777 void r8712_setassocsta_cmdrsp_callback(struct _adapter *padapter, 778 struct cmd_obj *pcmd); 779 u8 r8712_disconnectCtrlEx_cmd(struct _adapter *adapter, u32 enableDrvCtrl, 780 u32 tryPktCnt, u32 tryPktInterval, u32 firstStageTO); 781 782 struct _cmd_callback { 783 u32 cmd_code; 784 void (*callback)(struct _adapter *padapter, struct cmd_obj *cmd); 785 }; 786 787 #include "rtl8712_cmd.h" 788 789 #endif /* _CMD_H_ */ 790 791