1 /* 2 * Copyright (c) 2000-2010 LSI Corporation. 3 * 4 * 5 * Name: mpi2_sas.h 6 * Title: MPI Serial Attached SCSI structures and definitions 7 * Creation Date: February 9, 2007 8 * 9 * mpi2_sas.h Version: 02.00.05 10 * 11 * Version History 12 * --------------- 13 * 14 * Date Version Description 15 * -------- -------- ------------------------------------------------------ 16 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 17 * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit 18 * Control Request. 19 * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control 20 * Request. 21 * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST 22 * to MPI2_SGE_IO_UNION since it supports chained SGLs. 23 * 05-12-10 02.00.04 Modified some comments. 24 * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control. 25 * -------------------------------------------------------------------------- 26 */ 27 28 #ifndef MPI2_SAS_H 29 #define MPI2_SAS_H 30 31 /* 32 * Values for SASStatus. 33 */ 34 #define MPI2_SASSTATUS_SUCCESS (0x00) 35 #define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01) 36 #define MPI2_SASSTATUS_INVALID_FRAME (0x02) 37 #define MPI2_SASSTATUS_UTC_BAD_DEST (0x03) 38 #define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04) 39 #define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) 40 #define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) 41 #define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) 42 #define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) 43 #define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09) 44 #define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) 45 #define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) 46 #define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) 47 #define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) 48 #define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) 49 #define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) 50 #define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) 51 #define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11) 52 #define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12) 53 #define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) 54 #define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) 55 56 57 /* 58 * Values for the SAS DeviceInfo field used in SAS Device Status Change Event 59 * data and SAS Configuration pages. 60 */ 61 #define MPI2_SAS_DEVICE_INFO_SEP (0x00004000) 62 #define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) 63 #define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) 64 #define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) 65 #define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) 66 #define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200) 67 #define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) 68 #define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) 69 #define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) 70 #define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) 71 #define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) 72 #define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008) 73 74 #define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) 75 #define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) 76 #define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001) 77 #define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) 78 #define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) 79 80 81 /***************************************************************************** 82 * 83 * SAS Messages 84 * 85 *****************************************************************************/ 86 87 /**************************************************************************** 88 * SMP Passthrough messages 89 ****************************************************************************/ 90 91 /* SMP Passthrough Request Message */ 92 typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST 93 { 94 U8 PassthroughFlags; /* 0x00 */ 95 U8 PhysicalPort; /* 0x01 */ 96 U8 ChainOffset; /* 0x02 */ 97 U8 Function; /* 0x03 */ 98 U16 RequestDataLength; /* 0x04 */ 99 U8 SGLFlags; /* 0x06 */ 100 U8 MsgFlags; /* 0x07 */ 101 U8 VP_ID; /* 0x08 */ 102 U8 VF_ID; /* 0x09 */ 103 U16 Reserved1; /* 0x0A */ 104 U32 Reserved2; /* 0x0C */ 105 U64 SASAddress; /* 0x10 */ 106 U32 Reserved3; /* 0x18 */ 107 U32 Reserved4; /* 0x1C */ 108 MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ 109 } MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST, 110 Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t; 111 112 /* values for PassthroughFlags field */ 113 #define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) 114 115 /* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ 116 117 118 /* SMP Passthrough Reply Message */ 119 typedef struct _MPI2_SMP_PASSTHROUGH_REPLY 120 { 121 U8 PassthroughFlags; /* 0x00 */ 122 U8 PhysicalPort; /* 0x01 */ 123 U8 MsgLength; /* 0x02 */ 124 U8 Function; /* 0x03 */ 125 U16 ResponseDataLength; /* 0x04 */ 126 U8 SGLFlags; /* 0x06 */ 127 U8 MsgFlags; /* 0x07 */ 128 U8 VP_ID; /* 0x08 */ 129 U8 VF_ID; /* 0x09 */ 130 U16 Reserved1; /* 0x0A */ 131 U8 Reserved2; /* 0x0C */ 132 U8 SASStatus; /* 0x0D */ 133 U16 IOCStatus; /* 0x0E */ 134 U32 IOCLogInfo; /* 0x10 */ 135 U32 Reserved3; /* 0x14 */ 136 U8 ResponseData[4]; /* 0x18 */ 137 } MPI2_SMP_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REPLY, 138 Mpi2SmpPassthroughReply_t, MPI2_POINTER pMpi2SmpPassthroughReply_t; 139 140 /* values for PassthroughFlags field */ 141 #define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) 142 143 /* values for SASStatus field are at the top of this file */ 144 145 146 /**************************************************************************** 147 * SATA Passthrough messages 148 ****************************************************************************/ 149 150 /* SATA Passthrough Request Message */ 151 typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST 152 { 153 U16 DevHandle; /* 0x00 */ 154 U8 ChainOffset; /* 0x02 */ 155 U8 Function; /* 0x03 */ 156 U16 PassthroughFlags; /* 0x04 */ 157 U8 SGLFlags; /* 0x06 */ 158 U8 MsgFlags; /* 0x07 */ 159 U8 VP_ID; /* 0x08 */ 160 U8 VF_ID; /* 0x09 */ 161 U16 Reserved1; /* 0x0A */ 162 U32 Reserved2; /* 0x0C */ 163 U32 Reserved3; /* 0x10 */ 164 U32 Reserved4; /* 0x14 */ 165 U32 DataLength; /* 0x18 */ 166 U8 CommandFIS[20]; /* 0x1C */ 167 MPI2_SGE_IO_UNION SGL; /* 0x30 */ 168 } MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST, 169 Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t; 170 171 /* values for PassthroughFlags field */ 172 #define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) 173 #define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) 174 #define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) 175 #define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) 176 #define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) 177 #define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001) 178 179 /* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ 180 181 182 /* SATA Passthrough Reply Message */ 183 typedef struct _MPI2_SATA_PASSTHROUGH_REPLY 184 { 185 U16 DevHandle; /* 0x00 */ 186 U8 MsgLength; /* 0x02 */ 187 U8 Function; /* 0x03 */ 188 U16 PassthroughFlags; /* 0x04 */ 189 U8 SGLFlags; /* 0x06 */ 190 U8 MsgFlags; /* 0x07 */ 191 U8 VP_ID; /* 0x08 */ 192 U8 VF_ID; /* 0x09 */ 193 U16 Reserved1; /* 0x0A */ 194 U8 Reserved2; /* 0x0C */ 195 U8 SASStatus; /* 0x0D */ 196 U16 IOCStatus; /* 0x0E */ 197 U32 IOCLogInfo; /* 0x10 */ 198 U8 StatusFIS[20]; /* 0x14 */ 199 U32 StatusControlRegisters; /* 0x28 */ 200 U32 TransferCount; /* 0x2C */ 201 } MPI2_SATA_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REPLY, 202 Mpi2SataPassthroughReply_t, MPI2_POINTER pMpi2SataPassthroughReply_t; 203 204 /* values for SASStatus field are at the top of this file */ 205 206 207 /**************************************************************************** 208 * SAS IO Unit Control messages 209 ****************************************************************************/ 210 211 /* SAS IO Unit Control Request Message */ 212 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST 213 { 214 U8 Operation; /* 0x00 */ 215 U8 Reserved1; /* 0x01 */ 216 U8 ChainOffset; /* 0x02 */ 217 U8 Function; /* 0x03 */ 218 U16 DevHandle; /* 0x04 */ 219 U8 IOCParameter; /* 0x06 */ 220 U8 MsgFlags; /* 0x07 */ 221 U8 VP_ID; /* 0x08 */ 222 U8 VF_ID; /* 0x09 */ 223 U16 Reserved3; /* 0x0A */ 224 U16 Reserved4; /* 0x0C */ 225 U8 PhyNum; /* 0x0E */ 226 U8 PrimFlags; /* 0x0F */ 227 U32 Primitive; /* 0x10 */ 228 U8 LookupMethod; /* 0x14 */ 229 U8 Reserved5; /* 0x15 */ 230 U16 SlotNumber; /* 0x16 */ 231 U64 LookupAddress; /* 0x18 */ 232 U32 IOCParameterValue; /* 0x20 */ 233 U32 Reserved7; /* 0x24 */ 234 U32 Reserved8; /* 0x28 */ 235 } MPI2_SAS_IOUNIT_CONTROL_REQUEST, 236 MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST, 237 Mpi2SasIoUnitControlRequest_t, MPI2_POINTER pMpi2SasIoUnitControlRequest_t; 238 239 /* values for the Operation field */ 240 #define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) 241 #define MPI2_SAS_OP_PHY_LINK_RESET (0x06) 242 #define MPI2_SAS_OP_PHY_HARD_RESET (0x07) 243 #define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) 244 #define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A) 245 #define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) 246 #define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) 247 #define MPI2_SAS_OP_REMOVE_DEVICE (0x0D) 248 #define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E) 249 #define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F) 250 #define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14) 251 #define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15) 252 #define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) 253 254 /* values for the PrimFlags field */ 255 #define MPI2_SAS_PRIMFLAGS_SINGLE (0x08) 256 #define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02) 257 #define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01) 258 259 /* values for the LookupMethod field */ 260 #define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01) 261 #define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02) 262 #define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) 263 264 265 /* SAS IO Unit Control Reply Message */ 266 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY 267 { 268 U8 Operation; /* 0x00 */ 269 U8 Reserved1; /* 0x01 */ 270 U8 MsgLength; /* 0x02 */ 271 U8 Function; /* 0x03 */ 272 U16 DevHandle; /* 0x04 */ 273 U8 IOCParameter; /* 0x06 */ 274 U8 MsgFlags; /* 0x07 */ 275 U8 VP_ID; /* 0x08 */ 276 U8 VF_ID; /* 0x09 */ 277 U16 Reserved3; /* 0x0A */ 278 U16 Reserved4; /* 0x0C */ 279 U16 IOCStatus; /* 0x0E */ 280 U32 IOCLogInfo; /* 0x10 */ 281 } MPI2_SAS_IOUNIT_CONTROL_REPLY, 282 MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY, 283 Mpi2SasIoUnitControlReply_t, MPI2_POINTER pMpi2SasIoUnitControlReply_t; 284 285 286 #endif 287 288 289